Used Dry Spray Wall for sale (9,885)

Year of construction: 2015, condition: ready for operation (used), Two complete injection molding facilities with two Husky injection molding machines, five complete tools with metal separator, gravimetric Motan mixing system and crane system are available. 1) 2x Husky H-PET230 AE RS95, year of construction: 2015, max. shot weight: 2424g, max. PET throughput: approx. 390kg/h. 2) 48-cavity H-PET mold, preform weight: 17.8g, length: 89.35mm, wall thickness: 3.06mm, bottom thickness: 2.30mm, cavities: 48, cycle time: 12.1s-12.7s. 3) 48-cavity H-PET mold, preform weight: 30.26g, length: 122.3mm, wall thickness: 3mm, bottom thickness: 2.3mm, cavities: 48, cycle time: 14.4s-15s. 4) 32-cavity H-PET mold, preform weight: 18g, length: 82.04mm, wall thickness: 2.7mm, bottom thickness: 2.2mm, cavities: 32, cycle time: 11s-11.7s. 5) 32-cavity H-PET mold, preform weight: 29g, length: 108.59mm, wall thickness: 3.16mm, bottom thickness: 2.42mm, cavities: 32, cycle time: 13.4s-14s. 6) 48-cavity H-PET-AE mold. Total system dimensions X/Y/Z: approx. 24m/13m/5.5m. Including drying unit, mold dehumidification, color mixing devices and T-conveyor. Documentation available. An on-site inspection is possible. Iodpfx Aow Az Risb Isbb

Year of construction: 2019, condition: ready for operation (used), A complete painting system on two levels for engine manufacturing including all necessary aggregates and components is available. Workpiece carriers in the system: 118, cycle time: approx. 49s, complete throughput time: 97min, max. production capacity with 3 shifts: 258000/year, overall system dimensions X/Y: approx. 26000mm/9000mm. 1) Adsorption dryer. 2) Steam humidifier Carel. 3) Two- and three-stage filter boxes. 4) Compressor technology. 5) Air dryer Hygrex. 6) Robot with control cabinet and spray gun. 7) Paint dosing pump. 8) Paint preparation and cleaning. 9) Osmosis system. This is a complete painting system using a robot from cleaning to the drying process. Documentation available. An on-site inspection is possible. Iedpfx Asytgpqeb Iebb

Condition: used, Year of construction: 2001, Manufacturer : Forberg Model : FT20 Year: 2001 Type: Paddle dryer Description: The product is dried by blowing hot air through the mechanically suspended (fluidised) product. The humid air and suspended particles rise towards the primary filter. A fan blows the humid air into a three-stage water-cooled coil cooler. The condensate from the dehumidified air is drained from beneath the chamber. An electric heater reheats the cold, dry air, and the air returns to the mixing chamber. Material : stainless steel Nominal capacity: 20 litres Ibodpfx Abezbypye Ijb Mechanical mixing: two counter-rotating blade shafts Variable speed: yes (see control panel) Forced-air ventilation: 1 cold-air fan and 1 hot-air fan Cooling unit: tube heat exchanger, external source fluid connection, condensate drain. Heating system: 20 kW Temperature and humidity sensor Product sampling Infastaub AJN 024 air filter / dust collector: surface area 2 m² Cleaning filters with compressed air PLC + HMI: Siemens These options are available and are subject to an additional quote Lump breaker for wet granulation. Liquid spraying Dimension : 326 x 97 x 230 cm Operating manual and wiring diagrams Video available when powered on  

Condition: new, ⭐⭐⭐⭐⭐ (5.0) ⚡️Top Service⚡️Fast Delivery⚡️Great Support! ✈️ Plus shipping costs – shipping on request.✈️ Fast Delivery: Only 4-6 weeks after payment receipt! Important Note: If you would like to receive a quote for an automatic powder coating system, please use the powder coating system configurator on the homepage of our website. ✅✅✅Energy Class A+++✅✅✅ ➖➖➖➖➖ ✳️Maintain your liquidity! We offer a variety of financing models to ensure that your investment has the best chance of success. Contact us today to learn more about our lease-purchase, warranty, or leasing programs. ➖➖➖➖➖ ✨✨Buy directly from the manufacturer and benefit from price and quality advantages!✨✨ Benefit from Proton's 40 years of experience in surface coating technologies. ➖➖➖➖➖ ☘️Environmentally friendly☘️⚡️Green Energy⚡️☘️ ►Optimal adhesion begins with perfect preparation – Chemical pretreatment systems from PROTON◄ Before the paint can fully develop its effect, the surface must be flawless. PROTON surface pretreatment systems ensure that every contaminant – whether oil, dirt, or oxide – is reliably removed. Only in this way is lasting corrosion resistance and excellent paint adhesion possible. Each product requires an individually tailored process. Whether alkaline or acidic degreasing, iron or zinc phosphating, nanotechnology or chromium-free processes – we develop customized solutions for your requirements. Our pretreatment systems – whether spray or immersion systems – offer you: ✳️Maximum energy efficiency ✳️Minimized chemical and water consumption ✳️Precise process control with automatic dosing and pH monitoring ✳️Durable construction made of corrosion-resistant stainless steel or plastic Our promise: Customized technology for the highest standards Ibsdpfekwct Usx Ab Ijb Our experienced project team analyzes your production conditions in detail and recommends the optimally matched pretreatment system. We take into account all critical parameters – from heating capacity to water circulation to steam separation and chemical separation. The spray washing lines are seamlessly integrated into your conveyor technology. All cleaning, rinsing and drying processes run fully automatically and efficiently – ready for perfect coating. Available systems: ✳️Spray and immersion pretreatment lines ✳️Nanotechnology systems (e.g. Bonderite, Oxsilan) ✳️Degreasing and pickling systems ✳️Iron and zinc phosphating lines ✳️Chromating and chromium-free systems PROTON – Technology that convinces. Experience that delivers results. ⭐Follow us for new campaigns⭐ ☀️2 YEARS WARRANTY☀️ ☀️We have CE certificates for all our machines and ATEX certificates for the necessary machines.☀️

Condition: excellent (used), Year of construction: 2016, operating hours: 4,742 h, "RSA High-Performance Sawing, Deburring, Cleaning, and Drying Center" for Steel Tubes Ijdpey E Iypofx Ab Iobb The processing center consists of: 1) RSA Precision High-Speed Saw RASACUT SC 3000 with bundle loader 2) RSA transfer system between the RSA Precision High-Speed Saw RASACUT and the RSA Deburring System RASAPLAN XY 3000 3) RSA Deburring System RASAPLAN XY 3000 4) Extraction system/wet separator for the RSA Deburring System RASAPLAN XY 3000 5) RSA Cleaning System RASACLEAN ET 3000 6) RSA Drying System TURBODRY Bundle loader extended for tubes up to 6,200 mm TECHNICAL DATA Tube diameter: 6 mm to 55 mm Wall thickness: 1 - 6 mm Bar weight: max. 10 kg/m Material: steel Magnetism: max. 3 Gauss Output length: 6,200 mm Sawable lengths: 150 - 3,000 mm Restriction: Ø 6 – 7.9 mm max. length: 1,200 mm Ø 8 – 9.9 mm max. length: 1,500 mm Ø 10 – 12 mm max. length: 2,000 mm Length tolerance: Ø 6 - 49 mm +/- 0.2; Ø 50 - 55 mm +/- 0.25 SAW BLADE DATA Saw blade diameter: max. 315 mm Bore: 40 mm Auxiliary holes: 4 x 12 mm Pitch circle: 64 mm NEW PRICE: €390,000

Condition: refurbished (used), Year of construction: 2016, functionality: fully functional, total width: 1,800 mm, total length: 3,500 mm, total height: 2,500 mm, High-quality degreasing and cleaning system based on PER This system is a high-quality and high-performance degreasing and cleaning system based on perchloroethylene (PER) with a standard basket size. Thanks to two pre-treatment tanks, integrated ultrasonic cleaning, and vacuum drying, the system enables safe, thorough, and fast degreasing of a wide variety of metal workpieces. The complete stainless steel piping and high-quality system components ensure high operational reliability and a long service life. The system has been professionally overhauled and is ready for immediate use. An inspection of the system while it is running is possible at any time in 75447 Sternenfels after prior arrangement. We are always available to provide further information or answer any questions you may have. We look forward to your inquiry! System equipment: - Workpiece handling - Spray system - 2 x hot flushing systems - Ultrasonic cleaning with 1.0 kW / 25 kHz - Process filter 100 μm - Fine filter 5 μm - Vacuum drying Iodpfxezmxlpj Ab Ijbb - Vacuum distillation - Adsorption unit Technical data: Solvents that can be used: Perchloroethylene PER Filling volumes: 600 dm³ Operating mode: 2-shift Connected load: 40 kW Compressed air: 6 bar System weight: 3000 kg Throughput: Up to 5 batches/h (150 kg/h) Basket dimensions: 480 x 320 x 300 mm

Condition: good (used), Used pressure vessel on rollers Article number: 10562 Last application: Pharmaceutical Volume: 400 liters Type: Standing, on 4 rollers Material (in contact with media): 1.4571 / AISI316 Design: Double-walled and insulated Operating pressure according to nameplate: 5 / 6 bar Max. operating temperature: +100 °C Vessel dimensions: Manhole: 300 mm Outer diameter: 800 mm Roller height: 170 mm Overall height: 1910 mm Overall width: 990 mm Overall length: 1140 mm Materials: Inside: 1.4571 / AISI316 Outer parts: 1.4301 / AISI304 Equipment: Ibjdpfx Asgz An Tob Iob Nameplate: Yes Outlet diameter: 2 x 47 mm Distance from outlet to bottom: 60 mm and 75 mm Various connections Double wall Sight glass on the top 2 spray nozzles Roller frame

Condition: used, Year of construction: 2023, The machine is ready for demonstration at the warehouse in Blomberg. The machine is ready for painting and is already equipped with 1 Bings Marple 8/25 high-pressure pump (up to 175 bar) and 4 Sames-Kremlin AVX Airmix spray guns. Machine equipped with a changeover valve for quick paint changes lever switchable to up to 3 paint circuits and 1 flushing agent pump (options) The machine is in an Ex-rated version. Ibjdpfx Aezf N Thsb Iob - Manufacturer: Ka-Ma - Model: KR BM 1000 B - Year of manufacture: 2023 - Working width 1,200 mm (1,300 mm) - Single-gun drive - Dry extraction - Belt conveyor system - Feed speed continuously adjustable 2–8 m/min - With paint recovery - Gun control PLC, LS - Number of installed paint circuits: 3 - Number of spray guns installed: 4 - Spray guns: Sames/Kremlin AVX, Airmix - Airmix spray system - Height-adjustable spray guns: 150 mm - Pump manufacturer: Binks Maple 8/25 up to max. 175 bar - Includes supply air filter hood - Suitable for water-based and solvent-based paints - Exhaust air capacity: 12,000 m³/h - Length: 3,243 mm - Width: 3,482 mm - Height: 2,450 mm - Volts, Hz 400 / 50 - Color RAL 7035, light gray - Weight 3,100 kg _____ Optionally, we can also provide you with a quote for the installation and commissioning of the system, as well as employee training. Upon request, we also offer regular maintenance and servicing of the machine. For further information, please feel free to contact us!

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, total length: 69,000 mm, total width: 16,000 mm, total height: 16,000 mm, The system was designed according to Eurocode EN 1993 for the industrial drying of wood chips, sawdust, or similar biomass products and is suitable for use in biomass, wood, or pellet production. Ijdpfxezw Apge Ab Iebb Process components: Air heater, deflection rollers, feed modules, discharge modules, trough chain conveyor, belt tensioning and adjustment device, 7 exhaust stacks (height up to approx. 17.6 m) Designed for hot air or waste heat utilization (e.g., biomass boiler or CHP plant), heat requirement 10,270 kW th, installed electrical power 690 kW el. The inlet temperature in the dryer is 68°C, the outlet temperature is 42°C, and the heat transfer medium is a water/glycol mixture. The volume flow at the dryer outlet is 1,081,000 m³/h. Dust emission value 5 mg/Nm³ (moist), sound pressure at a distance of 1 m 85 dB(A) from the opening of the exhaust duct and the dryer. The dryer is designed for an outside temperature down to -40°C, the conveying capacity is at least 70 m³/h and a maximum of 250 m³/h with a bulk density of 260 kg/m³. The working platform of the dryer is located on approximately 8.00 m high steel supports and is enclosed with thermally insulating sandwich panels. A hall or other production components can be inserted under and between the supports (see under Documents, Steel Structure). The system has been disassembled and stored by an experienced assembly team, and this team can be arranged for transport and reassembly. Please note: We are selling exclusively this belt dryer and no other parts! Please direct your inquiries via WhatsApp to Mr. Sörgel; he is on-site at the factory and may not always be available by phone. Thank you very much!

Condition: good (used), Year of construction: 1983, functionality: unexamined, machine/vehicle number: SFV 1139, overall weight: 1,000 kg, total height: 1,800 mm, total width: 500 mm, total length: 4,150 mm, power: 3.4 kW (4.62 HP), This is a vibrating conveying / vibrating fluidized bed dryer-cooler unit from SCHENCK Process (SFV series/type). Isdpfx Abszxzrps Ijbb Operation: The equipment uses vibration to advance the bulk product along a perforated grid (width 260 mm). Air (hot or cold) is generally injected from below to fluidize, dry, cool, or dust-remove the material during its transfer. Drive system: It is powered by two Schenck vibrating/unbalance motors (SED 180-4 type), each with a power of 1.7 kW, mounted under the chassis. They create the oscillatory movement necessary for transport via micro-jumps. Suspension: The machine body rests on large coil springs to isolate the fixed white chassis (3210x730x930 mm) from the vibrations. Materials: Constructed of stainless steel with sealed inspection ports, suitable for the requirements of the food, chemical, or pharmaceutical industries.

Condition: good (used), Year of construction: 2013, BELSHOUW SPRAY RINGS, dispensing machine Iedpfx Absghmu Re Iebb with wall-mounted arm made of aluminum. Optional: quarkini ball and donut dispenser available upon request.

Condition: excellent (used), Year of construction: 2018, Baler, Bramidan B20 - second-hand - : Price ex location: 7.750.-€ (net) Manufacturer: Bramidan Type: Vertical raw material balers B20 Year of construction: 2018 Bale weight Cardboard (kg) 200-250 Plastic film (kg) 250-300 Pressing force 20 t Bale size WxDxH (mm) 1200 x 800 x 800 Filling opening WxH (mm) 1200 x 480 Power supply 3x400V 50Hz 16A Motor (kW) 4.0 Cycle time average (s) 36 / 21 Dimensions WxDxH (mm) 1775 x 1030 x 2790 Transport height: 2.58m Weight (kg) 1250 Stroke (mm) 750 Number of tie-downs 4 Type of strapping Strap Finished bale light Yes Bale ejection Automatic The classic among raw material balers The B20 is versatile and is used everywhere. The recyclable materials must be "dry & soft". Particularly suitable for raw materials such as cardboard, paper, cardboard packaging (PPK) and film. Stackable bales, up to 900 kg per pallet The bales are stacked 2 or 3 high on one; enormous space saving. Iodpjrl I Ivofx Ab Ijbb Simple bale strapping Automatic bale ejection Short cycle time thanks to high speed Strap rollers mounted on the front allow installation directly on the wall Pallet-sized bales that can be stored outdoors under cover 3xx230x-440 4kW Amps: 25/16 dB 62-64 Condition: good - very good Available: immediately Location: 09116 Chemnitz

Condition: used, Year of construction: 2007, functionality: fully functional, total height: 2,900 mm, total length: 1,100 mm, total width: 3,150 mm, working width: 3,000 mm, Manufacturer: Heimer Model: TSW-R 22-22 Year of manufacture: 2007 General / technical data: Used spray booth with dry filter technology (TSW). The spray booth has a modular design and can be connected to an exhaust unit. The filter mats above the paint booth absorb the particles during the painting process within their structure. Due to the modular design, the filter mats can be easily replaced. Dimensions (h x w x d): 2900 mm x 3150 mm x 1100 mm Ibjdpfx Ajzlrrmjb Isb

Condition: new, Year of construction: 2025, SAPI Powder Coating The perfect layer for lasting protection. Powder coating is a highly effective and widely used method for applying a protective and decorative finish to various types of surfaces. It is a dry finishing process in which a fine powder composed of resin, pigments, and additives is applied to a substrate. The powder is electrostatically charged so that it adheres evenly to the surface, forming a uniform coating. To achieve optimal adhesion and durability, the substrate is first thoroughly cleaned and prepared. Oils, dirt, and other contaminants are removed to ensure a clean surface. This is crucial for the powder to bond effectively to the substrate and achieve a strong and long-lasting coating. A powder coating system typically consists of various components and equipment required for the application and curing of powder coatings. SAPI_Powder_spray_gun Ibedpfswf Dpgsx Ab Iob Spray Booth and Spray Area The booth provides a clean environment for the application process and ensures even powder distribution. Powder Coating Gun A powder coating gun is used to apply the powder coating to the workpiece. Powder Feed System The powder feed system consists of a hopper or container in which the powder coating material is stored. It typically includes equipment such as powder pumps, feed hoses, and powder screens to transport the powder from storage to the spray gun. Pretreatment Equipment Pretreatment equipment is used to prepare the substrate before the powder coating is applied. This may include processes such as cleaning, degreasing, rinsing, and surface treatment to ensure good adhesion and durability of the coating. Curing Oven A curing oven is an essential component of a powder coating system. It is used to heat the coated substrate to the correct temperature so that the powder coating can melt, flow, and cure into a durable finish. The oven typically consists of a conveyor system or racks to transport the coated parts through the oven chamber. Exhaust system An exhaust system will be installed in the facility to extract excess powder, fumes, or volatile compounds generated during the coating process. This system helps maintain a clean and safe working environment for personnel and prevents the accumulation of powder particles in the air.

Condition: used, The painting line consists of the following elements: 1) MTL.120 monorail, 600 kg load capacity, equipped with hooks and rotation drive 2) Dry spray booth for painting 3) Dust extraction booth 4) Ducted solvent extraction system 5) Ducted paint oven system 6) Reciprocator for electrostatic spray guns 7) Wagner 30:1 high-pressure pump for solvent-based electrostatic installation 8) Protective enclosure for low-pressure ASAI system 9) Flow coating system 10) Low-pressure pump for ASAI electrostatic installation Iodpfx Ajyy Rivob Isbb

Condition: used, functionality: fully functional, machine/vehicle number: WFDFLT33902029406, empty load weight: 5,800 kg, maximum load weight: 29,200 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 12/2021, next inspection (TÜV): 06/2027, loading space length: 13,650 mm, loading space width: 2,480 mm, loading space height: 2,790 mm, total length: 13,850 mm, total width: 2,550 mm, total height: 4,000 mm, suspension: air, tire size: 385/65 R22.5", color: silver, - Archive photographs; the vehicle may still be in use #Chassis - Semi-Trailer, General Haulage - Fine-grain steel welded construction in lightweight design - Fifth wheel plate with replaceable 2" kingpin - Coil well approx. 8,040 mm long - 6 coil supports (coil pockets, internal 82 x 52 mm) - Coil well cover with plywood panels and steel sub-beams - 2 split-strip coil well covers, each approx. 293 mm wide, weight approx. 13 kg per cover - Outer frame slightly angled with "Load-Lock-Profil" for lashing strap attachment - Note: bodyside boards must be opened to hook straps in when used together with bodyside boards - 9 pairs of lashing rings, 5 t each, recessed in the coil well area - 24 t two-speed landing gear, one-side operation, straight leg, without slide compensation - Note: clear corner dimension/rear swing radius of landing legs approx. 1,930 mm, legs retracted - Pull-out ladder at rear - Side door retainer - Aluminium side underrun protection, bracket fitted transverse to and on the chassis rail for supporting aluminium slats - Aluminium front underrun protection - Half-shell mudguards with anti-spray flaps to EC standard - Rear corner impact protection - 1 plastic toolbox - 2 pairs of stake pockets recessed in the outer frame, approx. 72 x 42 mm internal size - 2 stake pockets recessed centrally in the floor, approx. 72 x 42 mm internal size #Axles & Suspension - SAF disc brake axles with 430 mm disc diameter - Laser-aligned axles/running gear to reduce tyre wear and fuel consumption - Staggered axle spacing 1,410/1,310 mm (combined transport) up to 44 t gross train weight - Air suspension - Without lift axle #Braking System - 2-line air braking system, colour-coded pipework for easy servicing - Spring-actuated parking brake - 2 anti-mismatch coupling heads at the front, without connecting line - EBS made by Haldex Iodswhp A Dopfx Ab Iebb - Electronic braking system with EBS socket at the front, without connecting cable #Wheels & Tyres - 385/65 R22.5" - Polished aluminium wheels - Wheel bolt protective caps #Electrics - 24 volt - Multi-chamber lights - Yellow LED side marker lights - Premium LED package including side marker lights with 20 LED diodes per light + LED safelight, at top of rear corner posts - 2 white LED front position lights - 2 white/red outline marker lights at rear - 1x 15-pin socket at front #Floor - Plywood panels approx. 30 mm thick, for high point-load capacity, forklift axle load up to max. 5,600 kg #Front Wall / Front Corner Posts - Steel corner posts, reinforced design - Release mechanism for side curtain at front wall - "Crash-Blocker" - Steel impact protection on lower inner section, approx. 140 mm high #Centre Posts - 3 pairs of sliding posts, movable along the entire length, with 4-way insert pockets and long pocket at the bottom - 3 pairs of post positions #Rear Wall / Rear Corner Posts - Steel rear corner posts up to roof edge - Curtain attachment with round tube and curtain tensioning ratchet - Rear portal doors, 2-leaf, each with 2 internal rod locks - Fliegl "I-Lock" integrated door lock #Curtain - Curtain with welded-in horizontal and vertical straps - Tensioning buckles in stainless steel #Roof - Sliding roof, rear end-lift foldable - Roof sliding from rear to front - L-section roof rail for automotive industry use - Internal width between roof rails approx. 2,490 mm - "Roof non-elastic", minimal roof rail deflection during loading and unloading

Condition: used, This listing is introducing 8 No Envair Mobile Isolators of different specifications currently held in our stock The units are in full working condition and ready for immediate use Envair Mobile Isolator Envair Technology is a UK-based manufacturer specializing in clean air and containment solutions for the healthcare, biotechnology, and pharmaceutical industries. Their product range includes a variety of isolators designed to provide controlled environments for handling hazardous substances, ensuring both operator and product safety. Applications Envair isolators are widely used in a variety of applications including Hospital Pharmacies: For preparation of TPN, CIVAS, and aseptic dispensing. Pharmaceutical Laboratories: Handling of HPAPIs and sterile compounding. Sterility Testing: Secure, controlled environments for product testing. R&D Facilities: Safe containment during experimental or early-stage developmen Key Features of Envair Isolators Positive and Negative Pressure Models: Envair offers both positive pressure isolators protect the product from contamination and negative pressure isolators to protect the operator from hazardous substances Compliance with GMP Standards: Many Envair isolators meet EU GMP Grade A and ISO 5 classifications, ensuring sterile, controlled environments. Customizable Designs: Envair provides bespoke solutions tailored to specific client needs, including unique dimensions and technical requirements. Advanced Containment Technology: Isolators are equipped with automated pressure decay leak tests, electromagnetic interlocks for transfer chambers, and integrated decontamination systems. User-Friendly Controls: Most units include intuitive touchscreen interfaces and PLC-based systems for simple and efficient operation. Growing Need for Containment with HPAPIs Demand for personalised medicines containing High Potent Active Pharmaceutical Ingredients (HPAPIs)—particularly in newer super-potent oncology, cardiovascular, and diabetes treatments—is increasing rapidly. These medicines often require shorter turnaround times, forcing pharmaceutical process manufacturers to develop faster, more agile workflows. In such high-risk, high-value settings, a GMP-compliant environment is not optional—it’s critical. It’s easy to overlook the fact that the people developing, manufacturing, and dispensing these complex drugs are at risk of exposure to harmful, sometimes lethal, compounds. Their safety is paramount, given the essential role they play in maintaining a reliable supply of advanced therapeutics. Expertise in HPAPI Handling for CMOs & CDMOs Envair has specialist expertise in helping Contract Manufacturing Organisations (CMOs) and Contract Development and Manufacturing Organisations (CDMOs) safely handle HPAPIs—even within existing non-contained facilities. Their isolator systems are designed, manufactured, and installed to meet rigorous containment performance levels below 1μg/m³ (OEB 5). Each system is custom-engineered for the specific site and process step—whether it’s weighing, mixing, milling, spray drying, or packaging. Applications Hospital Pharmacies: For preparation of TPN, CIVAS, and aseptic dispensing. Pharmaceutical Laboratories: Handling of HPAPIs and sterile compounding. Sterility Testing: Secure, controlled environments for product testing. R&D Facilities: Safe containment during experimental or early-stage development Isdpjxv Dhbjfx Ab Iebb

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, tank capacity: 36,784 l, total height: 6,245 mm, inner diameter: 3,400 mm, outer diameter: 3,770 mm, overall weight: 4,000 kg, negative pressure: 0.02 Pa, overpressure (max.): 2 bar, 2 x 37 m³ CCT Vessels / Beer Pressure Tank / Fermentation and Storage Tank Ibedpjyhzrgefx Ab Iob Technical Data / Dimensions Available units: 2 Total volume: approx. 36,784 liters Tank type: Pressure vessel Condition: used Suitable for food use: yes Design: suspended Internal diameter: approx. 3,400 mm External diameter: approx. 3,800 mm Total height: approx. 6,245 mm (incl. insulation dome approx. 7,245 mm) Weight (empty): approx. 4,000 kg Specific weight of medium: 1.0 t/m³ Operating pressure: Overpressure Operating pressure: 2 bar Test pressure: 2.9 bar Cone wall thickness: approx. 3.5-5 mm Top head wall thickness: approx. 6 mm Shell/Cylinder wall thickness: approx. 3 mm Operating temperature: -10°C / +50°C Material: Inner shell material: Stainless steel V2A (1.4301) Internal surface: ground and pickled Heating/Cooling System Cooling medium: Glycol Operating pressure: 3.0 bar Operating temperature: -3 °C Heating/Cooling system material: Stainless steel V2A (1.4301) 1 x shell cooling zone with approx. 112 ltr. capacity 1 x cone cooling zone with approx. 40 ltr. capacity Insulation Insulation thickness: approx. 150 mm (shell + top head), cone: 100 mm Insulation material: PU foam Cone cladding: Stainless steel (1.4301) Shell cladding: Aluminium trapezoidal sheet Equipment Mounting type: Suspension lugs Number: 4 Fastening: fixed Top head type: Torispherical head Lower head type: Conical Top head: 1 x manway DN 1000 with insulated hood and vent DN 80 1 x roof edge railing 1 x spray ball DN 32 incl. spray tube (removable) 1 x Cleaning-Air valve combination (RLV) consisting of: 1 x vacuum valve DN 50 1 x safety valve DN 25 1 x cleaning connection DN 100 1 x air connection DN 50 (threaded) Shell: 2 x temperature measuring connection with insulated box 1 x condensate pipe DN 32 1 x sampling line DN 10 1 x cable protection pipe DN 50 1 x cleaning line DN 50 1 x return manifold DN 40 (cooling) 1 x supply cooling DN 25 1 x cooling vent DN 10 1 x cooling drain DN 20 Lower head/cone: 1 x sample valve DN 10 1 x swiveling cone NW 450 1 x cone with threaded outlet DN 100 Documentation: Drawing Inspection book TÜV certificate

Condition: not inspected (used), Year of construction: 2013, functionality: unexamined, working width: 330 mm, passage height: 120 mm, Infrared drying tunnel for profiled wood Manufacturer: Makor Type: FTC-IRE Year of manufacture: 2013 The Makor FTC I.R.E. paint drying tunnel is designed for the accelerated curing of paints and surface coatings using electric heating elements, which are applied to frame timbers, moldings, profiled wood, and generally all types of wood profiles. It can also be used for preheating the profiles before the painting process to improve the paint quality. Passage width approx. 330 mm Passage height approx. 120 mm Infrared heating elements from above and below Ibodpfxozhap Ee Ab Ieb Includes output conveyor belt, manufacturer: Makor Length 4000 mm, conveyor belt width 250 mm Connection value approx. 55 kW Dimensions: Drying tunnel approx. 5000 x 1400 x 1750 mm L x W x H Operator terminal approx. 1200 x 500 x 1100 mm L x W x H Additional output conveyor belt approx. 4000 x 600 mm L x W Total weight approx. 2200 kg

Condition: good (used), functionality: fully functional, Used container system, dry, sealed, clean - Manufacturer: ALHO - Consisting of 16 + 2 x 20-foot containers = approx. 270 m² - Current use: temporary school - Available from July 31, 2026 Dimensions per container: Length: 6.00 m Width: 2.50 m External height: 2.95 m Internal height: 2.50 m Insulation: Wall: 80 mm Floor: 100 mm Ceiling: 80 mm Isdpfx Ajzhgt Rob Isbb Equipment: - Central staircase consisting of 2 x 20 ft containers - 4 classrooms, each consisting of 4 x 20 ft containers - 2 emergency staircases for the upper floor - Plastic windows with insulated glazing and tilt-and-turn function - Blinds - Electric heating - Sealing strips - Wall cladding - Ceiling cladding - Threshold plates - Container clamps - Acoustic elements Manufacturer's documentation is available. Loading and transport can be arranged. Only serious and legitimate inquiries will be answered, and these must include: name, email address, and telephone number.

Condition: used, Year of construction: 2003, functionality: fully functional, machine/vehicle number: 02343, EVT GIGANT Vapor Degreasing System Isdpfx Abozrw Dbo Iobb The system offered is ideally suited for the reliable removal of oils and oily residues from metal parts using the vapor degreasing process. Thanks to the generously sized work basket, high throughput rates are possible. Since this design does not include flooding of the work chamber, the required solvent volume remains relatively low, despite the large chamber size. This system is in good used condition and can be inspected and tested in our technical center in D-75447 Sternenfels by arrangement. Technical highlights: - The system recently underwent a comprehensive maintenance service by EVT. - The system was inspected for compliance with the German Federal Immission Control Act (BImSchV) by Chemlab as recently as March 2026. - The system was approved by DEKRA in July 2026. System features: - Closed system without exhaust air - Top loading - Rotating and pivoting device - Spray device - Flooding device with heated feed tank - Vapor degreasing - Recirculating air drying - Activated carbon module (designed for 2-shift operation) - Atmospheric distillation - Solvents that can be used: Perchloroethylene (PER) - Basket dimensions L/W/H: 1100x450x370 mm (internal dimensions) or alternatively 6 x 480x320x200 mm (external dimensions) - Throughput: max. 2 batches/h - Compressed air: 6 bar System availability: from October 2026 P.S. This offer is non-binding and subject to change. Modifications, errors and prior sale expressly reserved.

Condition: new, functionality: fully functional, machine/vehicle number: 9.702-476.0, operating pressure: 180 bar, high-pressure hose length: 20,000 mm, overall weight: 198 kg, warranty duration: 24 months, temperature: 80 °C, The HDS 11/18-4 SXA Farmer hot water pressure washer impresses with its high cost-effectiveness thanks to its economical eco!efficiency mode and optimized burner technology. This reliable machine features high-quality components, such as a water-cooled, slow-running, 4-pole electric motor and a robust 3-piston axial pump with ceramic pistons. Thanks to the energy-saving EASY!Force Advanced HD trigger gun, Servo Control, and the clever mobility concept, the machine is extremely user-friendly and ideal for use on farms. The automatic hose reel attachment kit with a 20 m high-pressure hose significantly reduces setup time and increases the working radius. Technical Specifications: Condition: NEW Catalog Number: 9.702-476.0 Model: HDS 11/18-4 SXA FARMER Manufacturer: KARCHER Country of Production: Germany Series: Professional Condition: NEW Thread Type: KARCHER !EasyLock Series Power Supply (~/V/Hz): 3 / 400 / 50 Pump Output (l/h): 500-1100 Operating Pressure (bar): 30 - 180 Fuel Consumption (kg/h): 5.2 Connected Power (kW): 7.0 Power Cable (m): 5 Max. Temperature (°C): 80 Fuel Tank Capacity (l): 25 Detergent Tank Capacity (l): 20 + 10 Weight (kg): 198 Dimensions (L x W x H) (mm): 1330 x 750 x 1060 Scope of delivery: Automatic hose reel with 20 m DN8, 400 bar hose Hand spray gun: EASY!Force Advanced Spray lance: 1050 mm Power nozzle 25° Servo Control Equipment: 4-pole, water-cooled three-phase motor Pressure cut-off Dry-run protection Automatic hose reel: - The integrated original automatic reel allows for quick and easy hose rewinding. High efficiency: - Eco!efficiency mode – economical and environmentally friendly, even during longer use. - Reduces fuel consumption and CO₂ emissions by 20 percent. Detergent dosing: - Precise detergent dosing with rinse function. - Large tank opening with filler chute. Mobility concept: - Jogger principle with large, rubber-tired wheels and a swivel caster. - Integrated tipping trough for effortless transport over steps. - Push handles for easy transport and maneuverability. Simple controls: - Intuitive operation with a large, one-button selector switch. Ibedpfx Asxpgrijb Ijb

Year of construction: 2014, condition: ready for operation (used), functionality: fully functional, X-Floc EM400/440 Insulation Blowing Machine Professional high-performance blowing machine designed for processing a wide range of loose insulation and fibre materials. Suitable for open blowing, dry injection, damp-spray applications and material conveying, it can be used both on construction sites and as part of a stationary production system. The machine is equipped with a large loading hopper of approximately 1,000 litres, capable of holding around 5–6 standard bags of insulation material. Four rotating shredder shafts progressively break up and condition the compacted fibres before transferring them into the rotary airlock. The adjustable airlock feed gate allows precise control of the material flow. Depending on the version and material used, the EM400/440 can reach a processing capacity of up to approximately 1,600 kg/h. The adjustable air system delivers a maximum pressure of 540 mbar, with an air volume of approximately 100–430 m³/h for the EM400 and up to 100–680 m³/h for the EM440. Main features: Suitable for different insulation and fibre materials Two-stage material conditioning system Four high-speed shredder shafts Approx. 1,000-litre loading hopper Adjustable material flow with 10 feed-gate positions Low-dust loading system with transparent strip curtains Connection for external dust extraction Remote adjustment of air and material parameters Robust, low-maintenance industrial construction Easy access to internal components for servicing Direct NW 76 mm hose connection Ibedpfx Abjzlggxj Ieb Suitable for mobile or stationary applications The machine can be operated using a cable or optional wireless remote control, allowing the operator to adjust air output, material supply and pressure-control functions directly from the working area. Technical data: Processing capacity: up to approx. 1,600 kg/h Maximum pressure: 540 mbar Hopper volume: approx. 1,000 litres Shredder shafts: 4 Dimensions: approx. 1,285 × 1,000 × 1,800 mm Filling height: approx. 1,250 mm Hose outlet: NW 76 mm EM400 power: approx. 7.5 kW EM440 power: approx. 10.5 kW Weight: approx. 425 kg for EM400 / 445 kg for EM440 Maximum conveying height: approx. 20–45 m for EM400 / 20–60 m for EM440 Optional equipment may include a wireless remote control, pressure-relief valve, internal or external air amplifier, suction drum and dust-extraction system.

Condition: excellent (used), functionality: fully functional, tank capacity: 1,20,500 l, total height: 20,000 mm, inner diameter: 3,000 mm, outer diameter: 3,300 mm, wall material: stainless steel, wall structure: single-walled, number of chambers: 1, operating temperature: 20 °C, operating pressure: 3 bar, Stainless steel pressure vessel, vertical, insulated Technical data / Dimensions Available quantity: 8 Volume: approx. 120,000 liters Vessel type: Pressure vessel Condition: used Food-grade: yes Design: vertical Internal diameter: approx. 3,000 mm External diameter: approx. 3,300 mm Overall height: approx. 20,000 mm Specific gravity of the medium: 10.00 t/m³ Operating pressure: Overpressure Operating overpressure: 3.00 bar Wall thickness, bottom: approx. 6.0 mm Wall thickness, top: approx. 4.5 mm Wall thickness, shell / cylinder: approx. 3.5-5 mm Operating temperature: 20°C Material / Properties Material, inner shell: Stainless steel Material grade: V2A-1.4301 (AISI 304) External surface: Ground, welded seams passivated Welded seams, internally ground: Yes Insulation Insulation present Insulation thickness: approx. 120 mm Insulation material: Mineral wool Material, insulation jacket: Aluminum Insulation jacket: Trapezoidal sheet Isdpfx Aszvh Dteb Iobb Equipment Base type: Foot ring / base ring Quantity: 1 Mounting: fixed Bottom type, top: Dished end Bottom type, bottom: Dished end Top: 1 x Insulated dome DN 900 1 x Access opening with dome cover DN600 1 x Valve dome cover with the following connections: 1 x Cleaning-ventilation-valve combination (RLV) DN 50 1 x Vacuum valve, spring-loaded with 2 heating elements and thermostat 1 x Safety valve 1 x Burst disc 1 x Thread DN 50 for probe Shell: 1 x Condensate pipe DN 25 1 x Cable protection pipe DN 32 1 x CIP pipe DN 50 1 x Base ring made of Cr-Ni steel (1.4301) with access opening 600 x 600 1 x Spray pipe with protruding ball head Bottom: 1 x Outlet cup DN 300 1 x Outlet with cover cap, chain, and eyelet DN 80 1 x Connection fitting for sampling tap DN10 Documentation Drawing Inspection log Inspection certificate

Year of construction: 2017, operating hours: 1 h, condition: used, functionality: fully functional, INTEGRATED DRYERS AND PELLETING SYSTEM WOOD SHAVINGS DRYING OLIVE POMACE DRYING FULL AUTOMATION WITH VARIABLE SPEED MOTORS Ibodew Hgbhepfx Ab Ieb STAINLESS STEEL FEEDING AUGERS CONVEYOR TRANSPORT SYSTEMS FUEL AND PRODUCT FEED BUNKERS 9 METER STAINLESS ROTARY DRUM 15 METER IRON ROTARY DRUM 8 MILLION KCAL SOLID FUEL BOILER WITH FULL CAPACITY, IT HAS THE LARGEST WOOD SHAVING DRYING CAPACITY IN TURKEY AT 15–20 TONS/HOUR. IN ACCORDANCE WITH EUROPEAN STANDARDS FOR DETAILED INFORMATION, PLEASE CONTACT US