Used Dz 750 for sale (4,071)

Condition: used, Year of construction: 2017, Serial no. 138522-100, control system type Unilog B8, clamping force 1,100 kN, tie bar clearance 470 x 420 mm, mould installation height 200 - 450 mm, opening stroke 380 mm, max. platen distance 830 mm, ejector stroke hydraulic/electric 140/125 mm, ejector force 25 kN, dry cycle time 1.5 s per 294 mm, max. mould weight 1,000 kg, minimum mould size 296 x 296 mm, injection unit type 750, screw diameter 35 mm, screw stroke 200 - 225 mm, L/D ratio 22, 1 hydraulic core pull, theoretical shot volume 193 - 442 cm³, specific injection pressure 1,714 - 3,000 bar, max. screw speed 325 rpm, screw torque 900 Nm, nozzle stroke/force 350 mm/40 kN, dosing unit by Movacolor, injection/dosing unit by Wittmann, type Feedmax S3-NET, year 2021, sprue picker/robot by Wittmann, type WP80, year 2021, travel paths X/Y/Z 100 x 550 mm x 90°, compressed air hose reel by Metabo, type SA250, length 25 m, machine weight 5,200 kg, operating hours 36,180. Bsdpfx Ajyc Snksbcslc This item is part of an online auction. Final acceptance subject to the approval of the seller.

Condition: used, Year of construction: 2017, Serial No. 138264-100, control system type Unilog B8, clamping force 1,800 kN, clear tie bar spacing 570 x 520 mm, mould installation height 225 - 550 mm, opening stroke 480 mm, maximum platen distance 1,030 mm, ejector stroke hydraulic/electric 180/160 mm, ejector force 40 kN, dry cycle time 1.7 s per 364 mm, maximum mould weight 1,800 kg, minimum mould dimensions 346 x 346 mm, injection unit type 750, screw diameter 45 mm, screw stroke 200 - 225 mm, L/D ratio 22, 1 hydraulic core pull, theoretical shot volume 193 - 442 cm³, specific injection pressure 1,714 - 3,000 bar, maximum screw speed 325 rpm, screw torque 900 Nm, nozzle stroke/force 350 mm/40 kN, dosing unit by Movacolor, injection/dosing unit by Wittmann, type Feedmax S3-NET, year 2021, sprue picker/robot by Wittmann, type WP80, year 2021, travel X/Y/Z 100 x 550 mm x 90°, compressed air hose reel by Metabo, type SA250, length 25 m, machine weight 7,200 kg, operating hours 46,038. This item is part of an online auction. Bodpfx Asyc Sh Debcjlc The sale is subject to the approval of the seller.

Condition: new, Year of construction: 2026, Shredding shafts for Hammel 750 – various configurations possible 8/5 – 8/6 - for mixed waste - for wood - for light metal - special shafts - others Bedpfx Asyf Uzrsbcolc

Condition: used, Year of construction: 1990, Technical details: adjustment drive of the grinding de: 0,0025 - 0,05 mm total power requirement: 100 kW adjustment of grinding head slide: 150 mm weight of the machine ca.: 17 t grinding spindle drive: 2 x 37 kW grinding width: 30-150 mm peripheral speed: 34 m/sec workpiece speeds: 60 - 300 mm/Sek. grinding height: 70 mm Blsdpfx Aovnmnrjbcjc grinding wheel diameter: 750 mm grinding tools: 750 x 75 x 350 mm grinding wheel turning speeds: 870 U/Min. max. workpiece diameter: 250 mm

Year of construction: 2012, condition: ready for operation (used), screw diameter: 55 mm, This Engel victory 750/160 Spex was manufactured in 2012. It is a hydraulic injection moulding machine featuring core pull, an ejector plate safety device, a 1/2" air valve, and a 10-way water distributor. Consider the opportunity to buy this Engel victory 750/160 Spex hydraulic injection moulding machine. Contact us for more information. Bsdpfxex D I Egj Abcelc • 2 units available • Machine 1: 29,462 hours • Machine 2: 28,713 hours • Core pull • Ejector plate safety device • Air valve 1/2" Additional equipment • 10-way water distributor

Condition: ready for operation (used), Year of construction: 1997, travel distance X-axis: 750 mm, travel distance Y-axis: 410 mm, travel distance Z-axis: 500 mm, controller manufacturer: HAAS, table load: 340 kg, spindle speed (max.): 8,000 rpm, number of axes: 4, This 4-axis HAAS MIKRON VCE 750 was manufactured in 1997. It features a table surface of 900x350 mm, a table capacity of 340 kg, and movements of X 750 mm, Y 410 mm, and Z 500 mm. The spindle operates at 8000 rpm with a power of 7.5 kW. Regular maintenance and recent updates ensure reliability. Consider the opportunity to buy this HAAS MIKRON VCE 750 vertical machining centre. Contact us for more information about this machine. • Table surface: 900 x 350 mm • Condition: regularly maintained; still in operation Bledex D Egzopfx Abcec • 2023 service: new tool change hand gearbox and new tool change magazine Additional equipment • 4th axis

Year of construction: 2010, condition: ready for operation (used), screw diameter: 55 mm, This Engel 750/160 Spex was manufactured in 2010. It is a hydraulic injection moulding machine featuring a 55mm screw diameter, core pull, ejector plate safety device, and a 6-way water distributor. If you are looking to get high-quality moulding capabilities, consider the Engel 750/160 Spex machine we have for sale. Contact us for more information. Blsdpfex D I Easx Abcec • Units available: 2 • Machine 1 hours: 35,066 h • Machine 2 hours: 38,769 h • Core pull • Ejector plate safety device • Air valve 1/2" • Water distributor: 6-way

Condition: excellent (used), Year of construction: 2014, operating hours: 43,500 h, functionality: fully functional, machine/vehicle number: 194413, clamping force: 2,200 kN, screw diameter: 55 mm, displacement volume: 475 cm³, injection pressure: 1,578 bar, injection weight: 440 g, mold height (min.): 300 mm, ejector stroke: 180 mm, opening stroke: 750 mm, overall weight: 12,740 kg, heating capacity: 13.4 kW (18.22 HP), Here, as a specialized dealer in injection moulding machines, we are offering the following well-maintained used injection moulding machine: As part of our business, we also purchase well-kept injection moulding machines from model year 2010 onwards. We have been a wholesaler of used injection moulding machines for over 25 years. Important Tax Information – Special Depreciation Benefits for Used Machines From 01/07/2025, used machines can also be tax-deducted in Germany with a special depreciation of 30% per year. In addition to the lower purchase price compared to a new machine, you can apply the same depreciation allowances as for new machinery. Keyword: Growth Booster, (§ 7 Paragraph 2 EStG-E) Manufacturer: Engel Model: VC 750 / 220 Control system: CC200 Year of manufacture: 2014 Machine No.: 194413 Operating hours: 43,500 h Injection Unit - Screw diameter: 55 mm - Shot volume: 475 ccm - Shot weight: 430 g - Heating capacity: 13.4 kW - Heating zones: 5 - Nozzle stroke: 350 mm - Injection pressure: 1179 bar (up to 1578 bar increased) Clamping Unit - Clamping force: 220 t / 2200 kN - Opening stroke: 757 mm - Max platen distance: 1050 mm - Min mould installation height: 300 mm - Ejector stroke: 180 mm / Ejector force: 80 kN Weight: 12,740 kg Extras - Core pull The machine is in excellent condition and can be inspected under power. Bledpjyc Ewxefx Abcoc Any peripheral devices shown are NOT included in the offer! The machine is available immediately. Delivery terms: - Free loaded onto buyer’s truck or delivered free to site against reimbursement of freight costs Information about our machines and company: - We only sell machines we have purchased from active production, stocked at our Hanover warehouse - All offered machines are tested and inspected before dismantling - We do NOT sell insolvency assets or act as brokers dealing in third-party property - All machines originate from successful, well-maintained operations - All machines offered can be inspected in our warehouse

Condition: used, Used Braby Ltd approximately 750 litre 316L stainless steel vertical mobile mixing vessel. Unit measures approximarely 1,000mm diameter x 900mm straight side. Unit has welded dished top and bottom heads. Internal rated 6 bar/full vacuum design pressure at 150 deg.c. Unit includes top entry stainless steel 3-blade agitator with Lightnin model LS25V drive/motor. Unit is mounted on 4 legs with castors. Specifications: Bljdpfxeygvias Abcsc Capacity: 198.1 gal Diameter: 3.28' Height: 2.95' Type of stainless: 316L Type Of Heads: Welded Dished Vertical/Horizontal: Vertical Legs/Lugs/Skirt: 4 legs with castors Dimensions: 3.28 ft x 2.95 ft

Condition: used, Year of construction: 2018, Nominal flow rate: 5087 m³/h Negative pressure Pa: 2300 Motor: 7.5 kW Dimensions: 1080 x 820 x 860 mm Weight: 154 kg Storage location: Nattheim Bledpjvxk Anefx Abcec

Condition: good (used), For sale, Edge chamfering machine. - Assfalg ASO 750. - 1.1kw engine. - We will help you organize a profitable shipping company or courier. Bodpfx Abov T Ttfocelc

Condition: excellent (used), Year of construction: 2019, operating hours: 5,500 h, functionality: fully functional, travel distance X-axis: 750 mm, travel distance Y-axis: 460 mm, travel distance Z-axis: 460 mm, rapid traverse X-axis: 36 m/min, rapid traverse Y-axis: 36 m/min, rapid traverse Z-axis: 36 m/min, controller manufacturer: Siemens, controller model: Sinumerik 840 D, table width: 410 mm, table length: 900 mm, table load: 350 kg, rotational speed (min.): 10 rpm, rotational speed (max.): 12,000 rpm, overall weight: 4,000 kg, spindle speed (min.): 10 rpm, spindle speed (max.): 12,000 rpm, number of spindles: 1, number of slots in tool magazine: 24, Vertical machining center Spinner VC 750 from training facility Year of manufacture: 2019 Control: Sinumerik 840D Technical specifications Spindle speed: 10 - 12,000 rpm Drive power: 11/17 kW Tool holder: SK 40 Number of magazine positions: 24 Table size: 900 x 410 mm Travel distances: Bledpfx Asya H Tcebcoc X-axis: 750 mm Y-axis: 460 mm Z-axis: 460 mm Equipment: Electronic handwheel Coolant system (KSS) Chip conveyor Prepared for 3D probe – receiver available

Year of construction: 2007, operating hours: 8,500 h, condition: excellent (used), functionality: fully functional, Vertical BAZ Emco FAMUP MCX 750-1200 with IKZ 40bar year of construction: 2007 Control: Fanuc 21i Running hours: 8.500h Chip Blaster high pressure system - Max. Speed 8.000 min. - Tool magazine with 24 magazine places (ISO 40), - Tool magazine ISO 40 - 24 tightening bolts ISO 40 - Standard painting: red - gray - black - Spindle is prepared for high pressure cooling (connection A) - Tapping without compensating chuck - Central lubrication system - Chip removal from the housing via flushing device - Flushing gun for cleaning of working area, clamping devices, parts - Coolant device with 3 adjustable nozzles - Coolant tank 500 l - Spindle blowing device for cleaning the fixture during tool change - Illumination of the working area by halogen lamp 24 V - Two-color alarm lamp TECHNICAL DATA MCX 750 axis X - longitudinal: 750 mm axis Y - transverse: 500 mm WORKING RANGE axis Z - vertical: 640 mm clamping area: 900 x 520 mm T-slots: number, width, spacing 5x18x100 mm max. table load: 400 KG TABLE distance table surface - floor mm 925 speed range: 50 ÷ 8.000 min spindle motor power: 13/9 KW tool holder ISO 40 DIN 69871 Torque: 82.7/57.3 Nm SPINDLE Drive Belt drive rapid traverse X,Y,Z m/1' 24 Working feed X,Y,Z m/1' 20 AXIS DATA Axis acceleration (X,Y,Z) G 0.25 Bedpfxoh Akhke Abcslc One-way positioning accuracy in total stroke range XYZ µm ± 8 One-way repeatability X, Y, Z µm ± 8 PRECISION Reversal span µm 5* Number of tool positions: 24 Tool selection random Max. Tool diameter with (without) adjacent tools ø 75 (150) Max. Tool length: 250 mm Max. tool weight: 6 KG TOOL CHANGE Tool change time (tool/tool): 1.5". Connected load: 20 KVA dimensions LxDxH: 2,650x2,400x3,050m weight: 5,5to

Condition: good (used), Year of construction: 2011, Pressure 160 t Total power requirement 18.5 kW Bledpfxoyg E Sqj Abcjc Machine weight approx. 13.5 t

Condition: used, Year of construction: 2006, tank capacity: 750 l, GENERAL INFORMATION Construction type: suspended Year of manufacture: 2006 Remarks: Internal vessel in 'conical/hopper shape'; manhole diameter approx. 410 mm; vessel is bolted onto three load cells on a four-legged frame External diameter: 1,380 mm Total width: 1,560 mm Overall height: 2,050 mm Overall length: 1,450 mm Heating/cooling: available Insulation: available Max. permissible operating temperature: 95 °C Max. permissible operating overpressure: 1.5 bar Max. overpressure: 0.05 bar Location: Bremen Nameplate: Volume: 750 liters Double jacket volume: 30.0 liters Product-contact material: V4A 1.4401/04 (AISI316) Condition: used Previous application: food industry VESSEL Max. permissible operating temperature: 100 °C Bottom shape: conical Mounting type: frame HEATING/COOLING JACKET Temperature control on bottom: double jacket INSULATION Insulation jacket: hermetically welded Insulation jacket material: stainless steel Blsdpfxoyck Hfs Abcsc EQUIPMENT Manhole / dome: on top head Outlet: DN65 DIN 11851 MATERIAL SPECIFICATION Temperature control system material: V2A 1.4301 (AISI304)

Condition: good (used), Year of construction: 2008, functionality: fully functional, CNC Lathe Weiler DZ 42 Year of manufacture: 2008 Control: Siemens 840D / Shopturn Manual loading up to D 220 mm Material passage: 42 mm Max. turning length: 450 mm Spindle speed: 6300 rpm Machining Turret with 16 driven tools X/Z/Y / C-axis Collet chuck Blodpfx Asyayc Debcec

Condition: reconditioned (used), Year of construction: 2008, power: 250 kW (339.91 HP), Mobile shredder ARJES VZ 750 E Electric drive: 250 kW Discharge conveyor Overband magnet Bsdpsxf Aqtofx Abcslc

Condition: used, Year of construction: 2013, machine/vehicle number: 15513, Polishing machine Gottschild HBS 1600-750-100-1(2) The Gottschild grinding and polishing machine offers a wide range of applications, from the production of high gloss furniture fronts, glass panels to Corian • grinding and polishing. • Easy change between grinding and polishing head • with sinusoidal tool head oscillation, for an even better uniform high- gloss surface which satisfies even the highest demands. • with automatic part detection (machine only designed for rectangular parts) Technical data: • Type: HBS 1600-750-100-1 • Year of manufacture 2013 • Electrical connection 400V, 50 Hz, 4,5 kW, 10 A • Compressed air 6 bar connection adjusted to 5 bar • Conveyor belt 1.600 mm x 940 mm • part width: 90mm- 750mm (without tool brigde 850mm) • part length: 150 mm - 2.800mm • part heights 8-100 mm (extended working height) • Frame size 1600 mm x 1200 mm • Rack height approx. 960 mm ± 25 mm • Frame material welded steel tube • Support for superstructure aluminum profiles • Belt cleaning manual every 8 hours • Safety devices emergency stop. • The machine has to be shielded by protective walls if the machine is delivered without housing. • Polishing motor 400V, 50 Hz, 0,75 kW with planetary gearbox • Control Siemens/Vipa S7 PLC, parameters via KEB Touch Panel • Frequency converter KEB • Control elements control ON/OFF, RESET, START/STOP, program interruption, grinding head speed, oscillation speed and belt speed • Tool bridge: Tool bridge with polishing head, consisting of a linear profile system, driven by linear cylinder. • Without polishing disk for the polishing head Bjdsu Afu Dspfx Abcjlc Location: on stock

Condition: used, maximum load weight: 7,080 kg, overall weight: 10,500 kg, axle configuration: 2 axles, first registration: 08/2016, loading space length: 7,000 mm, loading space width: 2,450 mm, loading space height: 2,380 mm, total width: 2,550 mm, total height: 3,500 mm, Equipment: tail-lift, Through-loader with robust GRP coating on plywood body, aluminium profile frame, waterproof screen-print plywood floor and special rear portal construction. Through-loading height: 2320 mm. Bledpfx Aex Ia Dxobcec

Condition: used, mileage: 1,87,000 km, power: 96 kW (130.52 HP), first registration: 11/2019, overall weight: 3,500 kg, next inspection (TÜV): 03/2026, color: white, emission class: euro6, number of seats: 3, loading space volume: 18 m³, loading space length: 4,180 mm, loading space width: 2,040 mm, loading space height: 2,130 mm, Year of construction: 2019, Equipment: ABS, air conditioning, central locking, soot filter, tail-lift, ISUZU M21 with tail lift from our own fleet, with a history that can be checked. Equipment: cruise control, air conditioning, retarder, ABS, double fuel tank, on-board computer, electric windows, etc. Please call us at WhatsUp/Viber also) E-mail: Bljdpexp Tndsfx Abcjc

Condition: used, Year of construction: 2002, x-travel 750 mm y-travel 500 mm z-travel 400 mm spindle taper ISO 40 spindle speed: 20-8000 1/min rapid travel x/y/z 25.000 mm/min feed range 1-5000 mm/min Size of table plate 1000 x 500 mm tool change unit 20 Blsdpfx Abeyatyiscec Control Heidenhain TNC 530 Number of working hours 25754 h table load 400 kg workpiece length 300 mm total power requirement 7,5 kW weight of the machine ca. 4 t dimensions of the machine ca. 2,3 x 2,6 x 2,56 m WEMAS VZ 750 machining centre, 3 axes, 4th axis prepared Good condition, few operating hours, only samples and prototypes, mainly aluminium. Control system 30,397 hours Machine 25,754 hours Programme run 8,683 hours

Condition: ready for operation (used), Year of construction: 2001, operating hours: 6,707 h, travel distance X-axis: 762 mm, travel distance Y-axis: 406 mm, travel distance Z-axis: 653 mm, controller manufacturer: SIEMENS, number of axes: 3, This 3-axis MIKRON VCE 750 was manufactured in 2001. It features a table size of 914 × 356 mm, with X-axis travel of 762 mm, Y-axis travel of 406 mm, and Z-axis travel of 653 mm. If you are looking to get high-quality milling capabilities, consider the MIKRON VCE 750 machine we have for sale. Contact us for further details regarding this machine. Blsdeych Rnspfx Abcsc • Table size: 914 × 356 mm

Year of construction: 2014, operating hours: 36,714 h, condition: ready for operation (used), controller manufacturer: BATTENFELD, controller model: UNILOG B6P, overall weight: 6,500 kg, screw diameter: 50 mm, This Battenfeld HM 150/750 UNILOG B6P was manufactured in 2014. It features a screw diameter of Ø50 mm and an injection volume of 441 cm³. The tie bar spacing is 520 x 470 mm, and it has operated for approximately 36714 hours. Ideal for polystyrene processing, this hydraulic injection moulding machine weighs 6500 kg. If you are looking to get high-quality injection molding capabilities, consider the Battenfeld HM 150/750 UNILOG B6P machine we have for sale. Contact us for more information. Bljdpfx Absychiqscsc • Injection volume: 441 cm³ • Clamping unit: • Tie bar spacing: 520 x 470 mm • Number of cores: 1 • Operating data: • Total operating hours: approx. 36,714 h • Hydraulics & electrics: • Hydraulic system pressure: 277 bar • Type of current: 3-phase + N • Frequency: 50 Hz • Rated voltage: 400 V • Current application: • Material: Polystyrene (PS)

Year of construction: 2014, condition: ready for operation (used), number of axes: 2, This Kocevar & Sons R-94-K0LQ-320/750-DD160 was manufactured in 2014. It features a rotary table with NC-controlled indexing and direct drive, motorized spindles for operations like drilling and milling, and an automatic loading/unloading system. Ideal for high-volume serial production of automotive or industrial components. For more information about this machine, please reach out to us. • Axis configuration: • Rotary indexing axis (C-axis/table) • Linear axes per machining unit: typically X/Z (some units may include Y) • Total axis count: configuration-dependent (usually 6+ overall) • Rotary table: • Indexing type: NC-controlled • Indexing accuracy: high-precision (seconds range) • Number of stations: layout-dependent (e.g., 6–12) • Table drive: direct drive (DD160) • Machining units: • Operations: drilling, tapping, milling, boring • Spindle type: motorized spindles • Spindle speed: high-speed production range (application-specific) • Spindle orientation: radial/axial depending on station Bodpjybbttsfx Abcjlc • Workpiece capacity: • Max workpiece diameter: approx. 320 mm • Max machining length: approx. 750 mm • Control system: • CNC: Siemens / Fanuc (configuration-dependent) • PLC-based automation • Machine features: • Integrated clamping systems • Cycle-time optimized for series production • Application: • High-volume serial production • Automotive / industrial components • Dedicated part machining (not flexible like a machining center) Additional equipment • Automatic loading/unloading (automation)

Condition: ready for operation (used), Year of construction: 2015, operating hours: 47,013 h, General Data Machine weight 12200 kg Measurements height 2300 mm Dimensions Machine Length 5861 mm Injection Unit Screw diameter 50 mm Clamping Unit Clamping force 1800 kN This Engel VICTORY 750/180 tech was manufactured in 2015. It features a tie-bar-less design, enhancing flexibility and accessibility for various mould sizes. With a clamping force of 1,800 kN and a screw diameter of 50 mm, it supports a maximum injection volume of 393 cm³. Currently in production and in excellent condition, this machine also includes a robot interface EUROMAP 67. Contact us for more information about this machine. Application Types Injection Moulding Bljdpfjx Nr Rmex Abcec