Used Easy Grinder for sale (6,645)

Condition: excellent (used), Twist drills and taps grinder from 1,5 to 25 mm CUOGHI model APE 25 Dsdpoyzpf Sefx Aptekt

Condition: used, Grinder Meissner Dkjdpfx Apsxywl Ustot -Type: SR 160/2 -Power: 18/25 kW -Throat diameter: 160 mm -Number of main screw speeds: 2 -Number of feed screw speeds: 2 (speed control via inverter) -Including loading for 200L trolleys -Dimensions with loading: 2500 x 1900 x 2720 mm -Throat made of brass -Machine made of stainless and acid-resistant steel -Power supply: 400V 50Hz 3N -Condition: used in very good condition, ready to work

Condition: excellent (used), Year of construction: 2009, grinding length: 1,200 mm, grinding width: 600 mm, total length: 3,500 mm, total width: 1,875 mm, feed length X-axis: 1,320 mm, feed length Y-axis: 730 mm, feed length Z-axis: 480 mm, feed rate X-axis: 1,320 m/min, feed rate Y-axis: 730 m/min, grinding wheel diameter: 350 mm, table length: 1,200 mm, table load: 1,400 kg, table width: 700 mm, Surface grinder LGB France - R12070SM Dedpfx Aoy Edctsptekt MACH-ID 9600 Make: LGB France Type: R12070SM Year: 2009 X - Travel: 1320mm Y - Travel: 730mm Z - Travel: 480mm Table Length: 1200mm Table Width: 700mm Table load: 1400 Grinding stone dimensions:350 x 50 x 127mm Power: 16kW Speeds: 1500Rpm Length: 3500mm Width: 1875mm Height: 2250mm Weight: 4500kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, CFS CombiGrind 2000/250 grinder-mixer Capacity: 2000 l Throat diameter: 250 mm Power: 75 kW Dedpey Alwgjfx Aptjkt Electrical supply: 400 V 50 Hz Dimensions: 3200 mm x 1900 mm x 2800 mm Equipped with an infrared MultiTrack analyzer. It analyzes fat, protein, and water content in meat.

Condition: excellent (used), HSS saw grinder LOROCH model KRD710 Dodeyg Nxhopfx Aptskt

Condition: used, TECHNICAL DETAILS - Distance between centers : 650 [mm] - center height : 175 [mm] - Max. part weight between centers : 80 [kg] - X/Z stroke : 285 / 800 [mm] - Axis X programmable feed speed : [mm/min] - Resolution : 0.0001 [mm] - Axis Z programmable feed speed : [mm/min] - Resolution : 0.0001 [mm] - Table orientation : 0 - 8.5 [°] GRINDING WHEEL HOLDER HEADSTOCK - T1 grinding wheel dimensions : 500 x 63 x 203,2 [mm] - Speed : 50 [m/s] - Power : 9 [kW] - Manual orientation : -15 / +195 [°] - Indexing precision : 2.5 [°] - Internal grinding : 40.000 [rpm] - Power : 3 [kW] PART-HOLDER HEADSTOCK - Type of cone : CM5 - Speed : 1 - 1500 [rpm] - Power : 1.8 [kW] - Boring : 30 [mm] - C axis indexing precision : +/- 0,5 [°] - TAILSTOCK - Type of cone : CM4 - Quill diameter : 50 [mm] - Quill stroke : 35 [mm] POWER SUPPLY - Supply voltage : 400 [V] - Total installed power : 20 [kVA] WEIGHT & DIMENSIONS - Machine floor space : 2.670 x 2.050 [mm] - Machine height : 1.900 [mm] - Machine weight : 4000 [kg] MACHINE HOURS - Number of hours under power : 190 [h] EQUIPMENT - CNC : FANUC Oi-TD - Electronic handwheel - 3 colors status lamp - Oil mist extractor - Linear scales on axes X/Z - Dynamic wheel balancing : MPM - Automatic contact detection : SENSITRON 6 - Fixed dressing device - Workpiece probe Dodpfx Aoylc R Ueptskt - Coolant tank : 375 [l] * with paper filtering unit

Condition: excellent (used), Year of construction: 2008, feed length X-axis: 5,500 mm, feed length Y-axis: 650 mm, feed length Z-axis: 750 mm, feed rate X-axis: 20,000 m/min, feed rate Z-axis: 20,000 m/min, table length: 5,500 mm, table width: 750 mm, Profile grinder MAEGERLE - MGC-L 560 Dkjdsx Swqwspfx Aptet Surface, Profile grinding machine 5600 mm CNC gear rack grinding machine Automatic grinding head B-Axis Grinding head ca 20 gr swivel ARO - KKS coolant tank 8000 L ( size 4400 x 1900 x 2200) Pendel opperation ( double table) Dresser automatic Table dresser X - Travel: 5500mm Y - Travel: 650mm Z - Travel: 750mm Table Length: 5500mm Table Width: 750mm Feed rate X-Axis: 20000mm/min. Feed rate Z-Axis: 20000mm/min. Grinding stone dimensions:600 x 300mm Power: 115kW Speeds: 8000Rpm Cooling system: Yes Feed rate Y-Axis: 20000mm/min. Length: 10700mm Width: 4700mm Height: 3800mm Weight: 42000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Year of construction: 2015, CNC milling machine, milling and engraving machine, MECANUMERIC, MECA EASY 1510 – used: Price ex works: €23,500 (net)! Manufacturer: MECANUMERIC Type: MECA EASY 1510 Dsdezbybispfx Aptjkt Year of manufacture: 2015, former DEMO MACHINE Three-axis milling machine in a flat-bed gantry design. Working travels X, Y, Z axes: 1,050 / 1,550 / 200 mm. Table frame and gantry: Designed as a solid, stress-free, fully welded steel structure, powder-coated. Heavy table substructure for mounting the vacuum table VAC-CAISSON, designed as a cassette, with air passage holes in a 10 mm grid. Feed rate: 300 mm/sec (18 m/min) in rapid traverse and feed mode! Guidance on rails, slide shoes with upstream ball screw. Transmission: Precision ball screws Ball screw on all axes Maintenance-free, brushless servo drive motors (750 W on X and Y, 300 W on Z) Repeat accuracy: +/- 0.025 mm Mechanical resolution: 0.0006 mm Numerical control: Mecanumeric CN 7000 ISO-G-Code Machine operation via a 10" touch screen display Complete documentation and CE declaration of conformity in accordance with the basic safety and health requirements of Vacuum table 1,020 x 1,500 mm Support/work table designed as a closed aluminum plate, on which vacuum passage holes are arranged in a 10 mm grid. The table is divided into 2 main areas, which can be switched on manually. Vacuum generation by one (1) two-stage high-performance vacuum side-channel compressor. Motor power 4.5 KW, suction capacity 320 m/hour, filter and silencer included. Due to the overall size and potential heat development, the pumps are housed outside the machine body. The electrical control and safety devices for the pump and valves are integrated in the machine control cabinet or on the control panel. Milling spindle HF40-ATC24 ENC Conversion Module APSG-A Vacuum generation by one (1) two-stage high-performance vacuum side-channel compressor. Motor power 4.5 KW, suction capacity 320 m/hour, filter and silencer included. Due to the overall size and potential heat development, the pumps are housed outside the machine body. The electrical control and safety devices for the pump and valves are integrated in the machine control cabinet or on the control panel. High-frequency motor milling spindle 4KW Power: 4KW Speed range: up to 24,000 rpm. Fast tool change with pneumatic ejection, ISO30 taper. Tool holder: Clamping diameter up to 2-16 mm. Cooling with compressed air 6 bar 20 m/h Converters and switching elements are included in this position. Safety enclosure for the machine Front with door and safety lock - Position PROTCHOC omitted - Preparation of the electrical control and switching elements as well as the output socket for a high-performance industrial vacuum cleaner. Changer CH 6 S Condition: good Available: immediately Location: Delmenhorst

Condition: used, Technical specifications: Dkodpfxozhud Re Aptjt Max. grinding wheel diameter: 150 mm Indexing head for sharpening milling cutters Adjustable sharpening angle Manual feed Motor power: 0.3 kW Overall dimensions: Length: 570 mm Width: 320 mm Height: 600 mm

Condition: used, functionality: fully functional, DECKEL Tool Grinding Machine Type 2025 / Internal Grinding Machine with Vertical Grinding Spindle – Fully Operational For sale is a used DECKEL precision grinding machine with a vertical grinding spindle for internal cylindrical grinding. Dkodpfxjzhuyxe Aptjt The machine is used, fully operational, and equipped with a digital position display (DRO). Features: Vertical internal grinding spindle Digital readout (X / Y / Z) Original DECKEL components Robust precision engineering Suitable for: Tool making Mold and die industry Precision grinding Internal machining of bores Inspection and test run available by appointment. Loading on site possible. Additional photos available on request.

Condition: used, functionality: fully functional, EYAN Universal Tool Grinding Machine – Used, including extensive accessories & documentation For sale is a high-quality universal tool grinding machine from the EYAN brand, in good used condition. The machine is ideally suited for the precise re-grinding and production of various cutting tools and is perfect for professional toolmaking as well as for locksmiths, maintenance companies, and training workshops. Thanks to its robust cast iron construction, the machine impresses with its smooth operation, stability, and precise grinding results. Equipment Dksdpozhx D Isfx Aptet EYAN Universal Tool Grinding Machine Precision chuck / tool holder Extensive adjustment and setting options Machine lamp Grinding wheel mounted Original under-cabinet with storage space Original operating manual Technical documentation Spare parts lists and documents Additional accessories and tools in the under-cabinet (see pictures) 400 V high-voltage connection Condition The machine is in good, used condition with the usual signs of wear and tear. It comes from an operating business and was in use until recently. Scope of delivery EYAN Universal Tool Grinding Machine Under-cabinet Chuck Grinding wheel Original operating manual Technical documentation Spare parts documents Accessories and tools as shown in the photos Application areas Tool and mold making Metalworking Locksmith shops CNC manufacturing Training companies Maintenance and repair Tool grinding machine, universal tool grinding machine, tool grinder, milling cutter grinding machine, drill bit grinding machine, milling cutter grinding, twist drill grinding, turning tool grinding, tool sharpening machine, precision grinding machine, toolmaking, metalworking, grinding machine, EYAN, universal grinder, tool grinder, cutter grinder, tool grinding, tool sharpening, 400V, industrial, workshop machine, mechanical engineering, grinding technology. An inspection and functional test are possible at any time by prior arrangement. Net price, plus 19% VAT.

Condition: good (used), Year of construction: 2022, Tool grinding machine, GEMINI Clottu AB-175, serial number 1949, manufactured in 2022. Djdpfx Aeztc Nljptjkt

Condition: ready for operation (used), Year of construction: 2019, number of axes: 6, This 6-axis OTC Daihen EASY ARC V02.04 was manufactured in 2019. It features a robot working range with a radius of 1,445 mm and a maximum payload of 6 kg. The integrated welding table measures approximately 2,200 mm in width and 1,100 mm in depth, with a load capacity of around 1,000 kg. If you are looking to get high-quality welding capabilities, consider the OTC Daihen EASY ARC V02.04 welding robot we have for sale. Contact us for further details. Dsdpfxey T Iyfo Aptjkt - System Type: Mobile Robotic Welding Cell (EasyArc)- Robot Kinematics: 6-axis vertical articulated robot- Robot Payload: 6 kg (Max. upper arm load: 10 kg)- Robot Working Range (P-Point): Radius 1,445 mm- Robot Repeatability: ±0.08 mm (Path), ±0.2 mm (Point)- Robot Drive System: AC Servo Motor- Robot Weight: 145 kg- Welding Power Source Model: OTC Daihen Welbee Inverter P400 (MIG/MAG, Gas-cooled)- Power Source Mains Voltage: 3 x 400 V / 50 Hz (+/- 15%)- Power Source Rated Input Capacity: 18.2 kVA- Welding Current Range: 30 - 400 A- Welding Voltage Range: 12 - 34 V- Power Source Duty Cycle: 400 A at 30%- Robot Controller: OTC Daihen FD11 (Model: EAFDB6-S000, Rated Input: 3.1 kVA, Phases: 3, Voltage: 400 V, Freq: 50/60 Hz, Mass: 60 kg)- Safety Enclosure: Lightweight protective housing with setup and loading doors equipped with electric safety interlocking switches- Welding Table: Integrated hole-pattern welding plate table prepared for clamping elements (Dimensions: ~2,200 mm width x 1,100 mm depth, Weight: ~600 kg, Load Capacity: ~1,000 kg)- Table Mobility: Legs equipped with swivel guide rollers and locking brakes- Horizontal Rotary Positioner: OTC Positioner PB Type (Max. payload 250 kg, Rotation speed 26°/s, Torque 205 Nm, Repeatability ±0.1 mm, Weight 110 kg, central bore in flange plate for media feed-through)- Environmental Conditions: Operating temp 0-45 °C, Humidity 20-80% (non-condensing)- max. 100 operating hours- 1 electronic axis is defective and needs to be repaired

Year of construction: 1989, condition: ready for operation (used), travel distance X-axis: 1,500 mm, number of axes: 3, This 3-axis ELB Surface Grinder was manufactured in 1989. It features a working area of 1,500 mm x 500 mm, ensuring ample space for various grinding tasks. If you are looking to get high-quality surface grinding capabilities, consider the ELB Surface Grinder we have for sale. Contact us for further details. Dksdpfx Aezb Et Doptst - Manufacturer: ELB- Working Area: 1,500 mm x 500 mm- Year of Manufacture: 1989- Condition: Very good / Fully functional

Condition: ready for operation (used), Year of construction: 1988, functionality: fully functional, Michael Deckel S 11 tool grinding machine. The machine is operational and in good condition. Accessories: grinding wheel arbors, collets, operating manuals. Djdpfx Ajzbt Aaeptjkt

Condition: excellent (used), Year of construction: 2019, operating hours: 100 h, functionality: fully functional, arm reach: 2,890 mm, type of input current: three-phase, load capacity: 6 kg, type of cooling: air, Equipment: cabin, On behalf of a client, we are selling a used Easy Arc 01 welding robot cell from OTC Daihen. The welding robot cell was used to a limited extent for training purposes for vocational school students and future operators of welding robots. In total, the system has approximately 100 operating hours. The system was purchased in November 2019 and put into operation in 2020. It has been idle for 3 years, which is why it is now being sold. Due to the low operating hours spread over the years, the system is still in very good condition, almost like new. The Easy Arc was developed by OTC Daihen as an entry-level solution for welding automation. The highly precise welding robot and the already integrated welding table ensure efficient welding production. The compact design facilitates transportation. In addition, the low assembly effort enables a quick start of production. The Easy Arc 01 consists of the following components: - OTC welding robot, type FD-B6: 6-axis articulated arm robot with a load capacity of 6 kg, including robot controller, type FD-11, and touchscreen control panel - OTC MIG/MAG welding system, type Welbee WB-P400: 400A inverter pulsed welding power source with integrated robot interface - OTC torch, type RT3500H: Robot welding torch (45°) with safety forced stop and 4-roll wire feed system, max. output 350A, gas-cooled, collision protection type B integrated - Siegmund welding table: 2000x1200mm and insertion height 950mm, load capacity 3,200kg, 28mm hole pattern with 100x100mm hole grid for accommodating appropriate clamping technology - OTC safety system: Sturdy safety enclosure including dual-channel monitored material gate and "Robot Monitoring Unit (RMU)". The use of RMU ensures that compliance with the predefined working area of the robot according to Performance Level PLd is guaranteed. Dkjdpfx Ajzkanasptot The system is CE-compliant (as well as compliant with UVV / VDI / DIN) and can be connected to any standard 32A three-phase power outlet due to an integrated residual current circuit breaker (type B). Further technical data: - Positioning accuracy: +/- 0.08mm - Maximum working area in the P-point: Ø2890mm - Memory capacity of the robot controller, type FD-11: 9999 programs - Communication between the robot controller and the welding system via digital CAN-BUS - Welding power source Welbee WB-P400: Output current range 30-400A, output voltage 12-34V, duty cycle 280A/100%, digital inverter technology with high arc stability over the entire current range The system is delivered including extensive accessories (see picture) for steel and aluminum. In addition, an extraction hood is included in the scope of delivery. The Easy Arc is currently still at the customer's site and is no longer in operation. An inspection may be possible after prior arrangement. Transport must be organized by the buyer; loading will be done on-site. If you have any further questions, please do not hesitate to contact us.

Condition: good (used), Code: 0432 Brand: TOMMASI E BONETTI - ITALY Model: T O6 SA - CE Standard Column grinder with dust extractor for metalworking, workshops, laboratories, joinery workshops, structural steelworks, etc. - CE standard Three-phase motor Hp 1,5 2800 rpm Grinding wheel dimensions: 200 x 25 x 20 mm Extraction motor 0,5 Hp Dksdpfx Aozipx Ejptst Overall dimensions mm 560 x 680 x 1000 h Weight kg 25

Condition: used, Tschudin HTG310 Universal Cylindrical Grinder Centre height: 100mm Distance between centres: 340mm (13.4") Maximum grinding diameter: 200mm Maximum grinding length: 340mm Hydraulic table traverse Table swivel: ±11° Wheelhead swivel: ±5° Workhead swivel: 360° Infinitely variable workhead spindle speed: 50–500 RPM Automatic plunge and traverse grinding cycles Automatic infeed with adjustable spark-out timer Rapid wheelhead advance and retract Hydrodynamic wheelhead bearings for exceptional accuracy Grinding wheel size: 350 x 50 x 127mm (14" x 2" x 5") Fitted With Hydraulic table drive Universal workhead Tailstock Dsdpfozrt Ipex Aptjkt Coolant system Wheel guard Machine lighting

Condition: used, Surface grinder MÄGERLE MFP-125-35 Dkjdpfxjy Tzcms Aptot

Condition: used, Year of construction: 2008, Manufacturer: Seydelmann Model: PG161 Year: 2008 Condition: Used Dksdpfx Apjzcnw Ujtet Serial Number: 08357-1 Stock Number: 3315 Hole plate diameter: 160 mm Mixer: 1300 litres, max 700 kg Compressed air: 6 - 10 Bar Power: 3 x 400V, 50Hz, 45kW Dimensions: 2400 x 3000 x 3150 mm Weight: 2250 kg With inspection platform and lifter for 200L tote bin

Condition: ready for operation (used), Year of construction: 1999, • Year 1999 • In our possession since 08/2024 Dodpfszcvaqsx Aptskt • Quinto 4 software • Electrostatic filter, Elbaron model • Numerous spindles • Recent maintenance performed: external cleaning and repainting, spindle overhaul, spindle belt replacement, brush and front plexiglass replacement, wheel and door rail replacement, machine measurement, offset adjustment, ball reference setting, backlash check, replacement of the air filtration and lubrication adjustment unit, replacement of 4 electric fans.

Year of construction: 2007, condition: ready for operation (used), overall weight: 1,300 kg, number of axes: 3, This 3-axis EROWA Robot Easy Automation was manufactured in 2007. It features a maximum load capacity of 1500 kg and a magazine plate with 6 positions per level. The machine has a Z-axis travel of 75 mm and an M-axis capable of 360° movement. If you are looking to get high-quality automation capabilities, consider the EROWA Robot Easy Automation system we have for sale. Contact us for further details. • Maximum Load Capacity (Magazine): 1500 kg • Magazine Plate Type: MTS 400 • Magazine Capacity: 6 Positions per Level • Maximum Load per Level: 1500 kg • Maximum Load per Position: 250 kg • Maximum Transfer Weight (RCS 5): 250 kg • Maximum Transfer Weight (RCS I): 130 kg • Required Coupling for Loads >130 kg: RCS 5 Coupling with RCS 5 Gripperlink ER-038622 • Supply Voltage: 3 × 400 VAC ±10% / 3 × 208 VAC ±10% / 3 × 480 VAC ±10% • Frequency: 50/60 Hz • Power Rating: 710 VA • Nominal Current: 1.8 A • Fuse Protection: 10 ATT • Service Socket Voltage: 230 VAC • Minimum Pneumatic Pressure: 5 bar • Minimum Air Consumption: 200 l/min (Nameplate) • Pneumatic Air Quality: Dry, Oil-Free • X-Axis Travel: Type Dependent • Z-Axis Travel: 75 mm • M-Axis Rotation: 360° • Z-Axis Drive: Pneumatic • M-Axis Drive: Electric • Net Weight: 1300 kg Dkodpfx Apozcdwdjtjt • Interface Type: EROWA Standard Interface • Communication Interface: RS232 • Optional Communication Interface: RS422 • Interface Connector: 72-Pin Harting Connector • Communication Protocol: EROWA EWIS Protocol • Alternative Communication Protocol: EROWA Standard Protocol • Robot Door: Pneumatic Door Valve Kit • Pneumatic Connection: Standard • Electrical Connector: Harting 6-Pin (230 V) • Electrical Connection: 230 V (Phase 1 + 2) • Machine Condition: No Longer Connected to Power • Viewing: Available

Condition: new, Seppi M. KASTOR hyd to / Stump Grinder / DEMO unit / Year of manufacture: 2023 / In stock & immediately available Price: €26,290.00 net / €31,285.10 gross - Cutting disc width: 0.11 m - Cutting disc diameter: 0.90 m - Overall width: 0.88 m - Depth: 1.80 m Dkodpfsznru Tsx Aptjt - Height: 1.30 m - Weight: 868 kg - Stump grinder for excavator mounting - For removing stumps and tree roots - Grinds tree stumps and roots up to 50 cm deep - For excavators from t - For mounting on various adapter plates - Drive designed for hydraulic motor, depending on the flow rate of the carrier device - Indirect double V-belt drive with 2x5 V-belts - Hydraulically adjustable hood - Protection by double chains - Rotor with 50 fixed, carbide-tipped tools - Color: red RAL3020 · anthracite RAL7021 OPT 074 Two axial piston hydraulic motors F12-80 cm³ with overpressure valve - Displacement in cm³: 2 x 80 - Required hydraulic pressure in bar (min-max): 200 - 350 - Required hydraulic flow rate in l/min (min-max): 140 – 220 An autonomous hydraulic system is recommended for the drive. 3 hydraulic lines are required: supply, return and drain. An additional double-acting hydraulic connection is required for the hydraulic hood. The unit is supplied without hoses, connections and adapter plate. Many other adapter plates (MS01 / MS03 / MS08 / CW05 / CW10 / CW20 / OQ65 / OQ70/55 / etc...) are in stock and immediately available. We have a very large selection of various Seppi M. products in our warehouse that are immediately available! Please contact us for this at . Upon request, we will also be happy to provide you with a financing offer. We are an official Seppi M. sales and service partner. We are an official Magni telehandler sales and service partner. We are an official DMS sales and service partner. We are an official Westtech sales and service partner. We are an official JCB construction machinery sales and service partner. We are an official Mercedes-Benz sales and service partner. We are an official Iveco sales and service partner. We are an official Holp sales and service partner. We are an official OilQuick sales and service partner. In addition, with 800 used vehicles, we are one of the largest commercial vehicle dealers in Germany. We supply the complete Seppi M. range for you! Errors and prior sale reserved! = Further information = Unladen weight: 868 kg Please contact Marius Herden for more information.

Condition: refurbished (used), Year of construction: 2001, functionality: fully functional, warranty duration: 6 months, Function The TAM 25/600 precisely separates and cuts ejector pins, ejector sleeves, and knockout punches in the shortest possible time. Workpieces with diameters from 0.5 to 25 mm made of tool steel and hard metal can be processed. Your advantages: • User-friendly quick-change system • Fast loading and unloading of workpieces • Separating and cutting to length in a single operation Simply place the workpiece in the quick-change prism, set the desired finished dimension, and separate and cut to length in one step. An optional additional clamping device is available for extremely thin, short, or offset pins. • Additional clamping device for thin, short, and offset pins Precision After separating, the work table is locked in the end position, the length is measured precisely, and ground to the finished dimension using an integrated micrometer feed. The wear of the grinding wheel is compensated by tracking the grinding spindle. Your advantages: The integrated diamond automatically dresses the wheel. Dksdpfx Ajzq Srwsptst On request, CBN or diamond grinding wheels are also available as optional equipment for the TAM 25/600. • Precise workpiece positioning via micrometer screw • Integrated dressing diamond for the grinding wheel • Integrated coolant system to prevent overheating of the workpiece • Trackable grinding spindle, so that the cutting edge of the grinding wheel always remains in the 0 position We also offer overhaul services for your old separating and cutting machine; simply contact us!

Condition: used, TECHNICAL DETAILS - Distance between centers : 1000 [mm] - center height : 175 [mm] - Table orientation : 9 [°] GRINDING WHEEL HOLDER HEADSTOCK - Left grinding wheels dimensions : 400 x 50 x 127 [mm] - Right grinding wheels dimensions : 225 x 20 x 76,2 [mm] - Power : 3 [kW] - Spindle speeds : 1500 / 1700 / 2200 [rpm] - Orientation of grinding wheel holder headstock : 270 [°] - Boring for internal spindle : 90 [mm] PART-HOLDER HEADSTOCK - Orientation of part holder headstock : 360 [°] - Spindle speeds : 20 - 400 [rpm] - Spindle internal cone : Morse 5 - Power : 0.9 [kW] TAILSTOCK - Internal cone : Morse 3 - Quill stroke : 30 [mm] Dkodpszfqzajfx Aptet POWER SUPPLY - Supply voltage : 380 [V] WEIGHT & DIMENSIONS - Machine floor space : 2860 x 1680 [mm] - Machine height : 1670 [mm] - Machine weight : 2500 [kg] EQUIPMENT - Automatic cycle work (rough part, finishing and reverse) - Kelco 5 display - Coolant tank * with paper filtering unit - 1 internal grinding spindle : 5400 [rpm] - Chuck 4 jaws - 1 three-key steady rest - Set of wheels