Used Edges for sale (3,820)

Condition: used, Year of construction: 2003, Single-sided edge trimming and gluing machine Manufacturer: IMA Type: AVM/K/I/G80/822/S3R3L20 Year of manufacture: 2003 For milling, edge gluing, and finishing for a standard groove - only for pre-shaped/pre-grooved doors and square-edged doors Left-hand machine (fixed stop on the left). Complete processing in 3 passes 1st pass: Processing of the top surface of the door (transverse processing) 2nd pass: Door long edge 3rd pass: Door long edge During the 2nd and 3rd passes, the protruding transverse edge from the 1st pass is milled off by using a co-rotating/counter-rotating milling process. Double groove gluing is only possible through modifications to the machine and subsequent manual finishing of the edge. Max. door thickness: - Straight edge: approx. 70 mm - Groove gluing: approx. 60 mm Stable machine frame as a support for aggregates and housing for electrical installation. Drive for feed speeds of approx. 5-25 m/min., mechanically infinitely adjustable. (not to be confused with processing speed) Continuous, plastic-coated strip-type conveyor chain, approx. 80 mm wide, with automatic central lubrication. Manually height-adjustable top pressure with a V-belt 80 mm wide and spring-loaded, ball-bearing guide rollers. Lodpozuykvefx Ag Ajaf Machine length approx. 10,900 mm Infeed table at the machine inlet. 1 horizontal, manually adjustable, unheated stop bar 1 joiner milling unit controllable, not swiveling, without sensing with 2 motors, each 3 kW Gluing unit for optional operation of straight edge or softforming gluing, by changing the glue application. Edge material: - Strips: up to 1.3 mm - Roll material: 0.4-3 mm - Solid wood strips: 6 mm Strip length max.: 2550 mm Strip height: 14-80 mm (depending on glue application) with: - Side adjustment by hand for the pneumatically controlled glue application. - Height adjustment by hand -15mm downwards and up to +10mm upwards. 1 bell for the main pressure roller, manually adjustable 1 glue application 0.8L, max. edge height 70mm, straight edge with pneumatic quick-release, Chem-Coat coated, electronic temperature control 1 hot melt glue application 0.8L with quick-release, up to max. 80 mm high edge material, soft edge, Chem-Coat coated, with temperature control and control unit for the strip coating 1 automatic Quickmelt hot melt glue feeder with a heating power of 5.0 kW 1 2-fold magazine only for edge material up to 3.0 mm thick, can be manually attached to the single-roll magazine 1 groove forming pressing unit for pressing the edge material into the groove with: - an activation unit 15 kW for re-activating the edge material for groove forming - a pneumatically controlled forming shoe for the underlapping edge - a pneumatically controlled forming shoe for the entire groove - additional post-pressing rollers for the edge areas in the groove - an electro-pneumatic lateral retraction device for the entire pressing unit 1 horizontal adjustment with mechanical digital display 1 trimming unit for 2 motors mounted on the top pressure for trimming the front and rear edge/strip overhang, for trimming cuts flush or with a bevel. 1 milling unit for 2 motors with height sensing, side sensing, for pre-milling from below and above with 2 motors 1kW, 400V, 200Hz, 12,000 RPM, 30° swiveling 1 milling unit for 2 motors with height sensing, side sensing, for fine milling from below and above with 2 motors 660W, 400V, 200Hz, 12,000 RPM, 30° swiveling Note: The technical data and descriptions are copies of the original order

Condition: used, Year of construction: 2019, Edge banding machine Manufacturer: SCM Type: Minimax E10 Year of manufacture: 2019 Ledpfx Aszuykpog Ajaf Technical data Edge thickness (strip material): 0.4 - 3.0 mm Edge thickness with shear cutter at 80 mm edge height: 0.4 - 1.5 mm Edge thickness with shear cutter at 50 mm edge height: 0.4 - 2.5 mm Edge thickness with shear cutter at 45 mm edge height: 0.4 - 3.0 mm Edge height: 10 - 84 mm Workpiece thickness: 8 - 80 mm Minimum workpiece width: 50 mm Minimum edge length: 210 mm Minimum inner radius (concave) at 0.4 mm edge: 25 mm Minimum outer radius (convex) at 0.4 mm edge: 5 mm Feed speed: 4 / 8 m/min Processing temperature: 140 - 220 °C Edge feed Integrated shear cutter for cutting edge material from the roll. Roll table for holding roll material. Suitable for ABS edges, melamine edges, veneer edges, and other pre-fabricated edge strips. Gluing system Teflon-coated glue tank below the table top. Continuous glue circulation to prevent glue deposits. Fast heating time of approx. 7 minutes. Standby function with timer. Glue tank capacity: 1.5 liters. Pressure system Motor-driven glue application roller. One free-running pressure roller. Foot pedal for start and stop control of the working cycle. Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: used, Year of construction: 2017, Edge banding machine Manufacturer: Homag Type: Optimat KDF 440 C Year of manufacture: 2017 Lajdpfszuykcsx Ag Aof Technical data Workpiece thickness: 8 - 60 mm Edge material: 0.4 - 8 mm (depending on the equipment) Feed rate: 8 - 18 m/min (stepless) Workpiece length min. approx. 120 mm Workpiece width min. approx. 60 mm Glue application EVA hot melt adhesive, optionally PUR-compatible Glue reservoir Teflon-coated, quick-change system possible Total connected load approx. 15 - 20 kW (depending on the equipment) Compressed air requirement: 6 - 7 bar Machine weight: approx. 3,000 - 3,800 kg Control system: powerControl / powerTouch CE marking Equipment: Joint milling Glue application Pressure zone Cut-off saw unit Milling unit top/bottom Corner rounding unit Scraping blade unit Edge finishing unit Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: used, Year of construction: 2012, Softforming edge banding machine with panel cutting device Manufacturer: Elwood Year of manufacture: 2012 Technical data: - Adhesive application system with slotted nozzle - Compatible with EVA and PUR adhesives - Meler adhesive melting and application system - Electronically controlled adhesive temperature and melting time - Panel thickness: 10-60 mm - 2 profiling milling units - IR heating lamps for material preheating - Spray device for release agent - Pressing zone with heated tower pads (can be replaced with pressing rollers) - Edge band magazine - Front and rear trimming units - Top and bottom flush trimming units for longitudinal edge overhang (2 at the top + 2 at the bottom) - Top and bottom polishing units - Computer control for quick, easy and precise adjustment of the machine's main functions and units Note: Ljdpfxozuyi So Ag Ajaf The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: used, Year of construction: 2009, Edge banding machine Manufacturer: IMA Type: Novimat/I/G80/650/R3 Year of manufacture: 2009 Technical data - Workpiece overhang from the chain conveyor: 38 mm - Feed width: min. 65 mm (with max. workpiece thickness of 25 mm) - Workpiece length in feed direction: 150 mm - Overall height (top edge of chain conveyor): 960 mm - Feed speed: approx. 6 - 30 m/min, electrically adjustable - Machine control system ICOS open compact Workpiece - Workpiece length: min. 150 mm - Workpiece width: min. 65 mm - Workpiece thickness: 8 - 40 mm (with edge trimming function) / 60 mm (without edge trimming function) - Smallest workpiece: 150 x 150 mm or 65 x 300 mm - Edge material: paper, plastic and veneer - Height: 14 - 65 mm - Roller material thickness: 0.3 - 3.0 mm (veneer edges limited to max. 1.0 mm) - Max. upper edge overhang: 5 mm Units Infeed area - Release agent applicator mounted at the top and bottom, not adjustable Edge trimming - 2 motors 4.5 kW, 150 Hz, 9000 rpm - incl. frequency inverter with braking function - Motor 1 counter-rotating - Motor 2 co-rotating Gluing unit VTG 3-6 - with one preheating nozzle 300 mm for preheating the workpiece edge - 6-position edge magazine for roller material 0.3 - 3 mm thick. - 1 driven main pressure roller and 4 pressure rollers, with scraper, pneumatically adjustable Glue application - with pneumatic quick-lock system - Chem-Coat coating - electronic temperature control - Volume 0.8 l Pre-melting tank approx. 1 l - Heating power 3 x 400 W - with EVA glue, approx. 7.0 kg/h - with filler-free glue, approx. 5.0 kg/h Cutting unit - 2 motors 660 W, 200 Hz - incl. frequency inverter with braking function - pneumatic pivoting 0+25 for straight and bevel cutting Flush trimming - 2 motors each 1000 W, 400 V, 200 Hz, 12000 rpm - with HSK 25 shank - incl. frequency inverter with braking function Multi-profile trimming unit - 2 motors each 660 W, 400 V, 200 Hz, 12000 rpm - with HSK 25 shank - incl. frequency inverter with braking function - for trimming 4 profiles - with stepper motor axes for horizontal and vertical positioning Contour trimming unit KFA x30 - 1 motor 500 W, 400 V, 400 Hz, 18000 rpm - Program-controlled conversion for up to 4 profiles - incl. fine positioning for different edge thicknesses Multi-profile scraping blade - Stepper motor axes for horizontal and vertical positioning - Scanning from above and below (max. 4 profiles) - Scanning from the side via pneumatic pressure Spray nozzles at the top and bottom for applying cleaning agents - fixed, not adjustable Surface scraping blade - with height sensing skid - electronically controlled horizontal positioning Buffing unit - 2 lower and 2 upper motors, 180 W, 50 Hz, 1400 rpm - 1st motor pair with cloth-sisal discs 50x160x19 mm - 2nd motor pair with polishing discs 50x160x19 mm - The motors operate in the same direction and are both tilted and pivoted in the feed direction. - Each motor can be individually adjusted vertically Lajdozuyi Eepfx Ag Aef 2x NC-controlled grooving - 2 milling motors each 4.5 kW, 150 Hz, 9000 rpm - incl. frequency inverter with braking function - one manual 90-degree pivoting device from 180 -270 with co- and counter-rotating function - Horizontal, stepless adjustment with AC servo motor for grooving unit Workpiece return Note: The technical data and descriptions are copies of the order confirmation at the time. The information is for informational purposes only and is non-binding.

Condition: used, Year of construction: 2017, Edge banding machine Manufacturer: Biesse Type: Jade 240 Year of manufacture: 2017 Technical data Lajdpszuyixofx Ag Ajf Note: [b]The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.[/i]

Condition: used, Year of construction: 2010, 1. Edge banding machine Manufacturer: Homag Type: KAL 210 Ambition 2264 Year of manufacture: 2010 Technical data Release agent spraying system Joint milling unit (2 x 4 kW) Glue application A20 (granule/quick-melt system) Pressure zone with driven pressure rollers Miter saw HL84 (2 motors) Flush-/radius-/chamfer milling unit BF10/BF20 Lsdpozuyilofx Ag Asaf Corner copying unit FK11 (2 motors) Profile drawing blade PN10 Straight drawing blade for glue joint Buffing unit (polishing) Release agent and cleaning agent spraying system at the outfeed Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: used, Year of construction: 2006, - Edge milling unit 2 x 2.2 kW - Combi-melt gluing unit - Automatic edge magazine - Trimming unit 2 x 0.8 kW - Flush trimming unit 2 x 0.7 kW - Fine milling unit 2 x 0.3 kW - 2 quick-change sets for fine milling - Automated copy milling unit 2 x 0.37 kW - 2 pull blades - 2 surface pull blades - 5-way spraying system - Fine buffing unit with cloth disc 2 x 0.2 kW Edge banding machine Manufacturer: OTT Type: Twister Technical data: Glue application: Hot-melt adhesive application roller with simultaneous and counter-rotating action Edge thickness: 0.3-10 mm Workpiece thickness: 8-60 mm Workpiece width: 70 mm - Minimum Workpiece length: 150 mm - Minimum Operating pressure: 6 bar Feed power: 3.0 kW Feed speed: 14-20 m/min. Electrical connection: 3 x 400 V, 50 Hz Extraction: at 20 m/s, 1 x 180 mm diameter = 35 m³/min. Air velocity: 20 m/s - Minimum Compressed air consumption: 300 liters/min. (approximate value) Equipment - Machining units: Joining: - 2 x 2.2 kW, n=14600, 250 Hz, two individually controlled spindles. Combi-melt gluing unit: - Top-mounted gluing unit with interchangeable hopper for processing EVA, PUR hot-melt adhesives, or standard cleaning granules, hopper volume 2.5 l Edge magazine: - Automatic edge magazine with optical monitoring for strip edges in fixed lengths Trimming: - 2 x 0.8 kW, n=12000, 200 Hz, automatic pivoting 0 / 5, 2 HM saw blades, 140 x 3.2 x 16 mm, z=34 Flush trimming: - 2 x 0.7 kW, n=12000, 200 Hz, single-sided, with 2 HM reversible blade cutter heads HF70, 70 x 20 x 16 mm, z=4 Fine milling (chamfer 15 / 30 / 45): - 2 x 0.3 kW, n=12000, 200 Hz, double-sided, with 2 HM reversible blade cutter heads HF70, 70 x 20 x 16 mm, z=4 AWSR (radius R2-R5): - 2 quick-change sets for fine milling, 2 x 0.3 kW, with 2 HM reversible blade cutter heads AR73 x 16 x 16 mm, z=3, R2-R5 Copy milling: - Automated copy milling with two separate spindles for machining end faces and longitudinal radii. Motor power: 2 x 0.37 kW, 12000 rpm, Tools: R1 - R3 Pull blade: - 2 HM pull bars, automatically adjustable Surface pull blade: - 2 HM pull bars with fine adjustment Lsdszuyifjpfx Ag Aoaf PU set: - 5-way spraying system, 2 x release agents, 1 x lubricant, 2 x cleaning agents, fine buffing unit with cloth disc Edge finishing: - 2 x 0.2 kW, n=2800, 50 Hz, oscillating brushes Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: used, Year of construction: 2000, Edge banding machine, single-sided Manufacturer: OTT Type: Pacific V 6-F Year of manufacture: 2000 Technical data: Edge thickness: 0.2 - 6 mm Workpiece thickness: 8 - 42 mm Workpiece width: min. 70 mm Workpiece length: min. 0 mm Feed speed: 12 m/min Electrical connection: 3 x 400 V, 50 Hz Extraction: 2 x 120 mm at 20 m/s Extraction capacity: m³/h Equipment, processing units: Edge trimming 2 x 1.5 kW, 12,000 rpm, 200 Hz two tool-controlled spindles Gluing unit Rapid heating tank with Melt-matic automatic edge magazine with optical monitoring for strip edges in fixed lengths Release agent spraying device Cutting unit 2 x 0.2 kW, 12,000 rpm, 200 Hz automatic pivoting 0 / 3 Flush trimming unit x 0.43 kW, 12,000 rpm, 200 Hz Radius trimming unit R2 - R5 2 x 0.3 kW, 12,000 rpm, 200 Hz 2 quick-change stations for trimming units Corner rounding trimming unit 2 x 0.3 kW, 12,000 rpm, 200 Hz Ledpfxezuyh Us Ag Ajaf Scraper blade 2 x carbide scrapers Smoothing unit 2 x 0.2 kW, 2,800 rpm, 50 Hz Weight: 2,000 kg Note: The technical data and descriptions are copies of the order confirmation from that time. The information is provided for informational purposes only and is not binding.

Condition: used, Year of construction: 2021, - Edge joining unit - Teflon-coated gluing unit - Miter saw unit - Multifunction milling unit x-motion PLUS, flush and radius milling unit - Edge processing unit - Radius grooving unit - Polishing unit Edge banding machine Manufacturer: Felder Format4 Type: Tempora60.06LX Year of manufacture: 2021 Technical data Control system: x-motion PLUS Chain feed Feed speed: 10 m/min Drive motor: 0.75 kW (S6) - 1.1 kW (S6) Minimum workpiece length: 140 mm Minimum workpiece width: 70 mm The minimum workpiece width varies depending on the workpiece length, height, and surface texture. Rotary table edge magazine for edge banding material Diameter of the rotary table: 750 mm Edge thickness: 0.4 - 3 mm Pull-out frame Pull-out workpiece support, extendable up to 450 mm Upper pressure bar Manually adjustable workpiece height: 8 - 60 mm Edge feeder for edge banding and strip material Edge joining unit: 2.2 kW, diamond cutter Z2 Speed: 12,000 rpm, 2 x 1.1 kW Teflon-coated gluing unit for 1.5 kg of EVA or PUR granules Ready for use after only 10 minutes of heating time Tool-free quick-change system Pressing unit, pneumatically controlled 1 driven and 2 tapered pressing rollers form the pressing zone Shear cutter for edge banding material, 0.4 - 3 mm thickness Miter saw unit with two high-frequency motors 0.35 kW, 12,000 rpm Pneumatically swiveling 0 - 10 degrees Multifunction milling unit x-motion PLUS, flush and radius milling unit 1 high-frequency motor above and below, 0.75 kW, 12,000 rpm, each with 4 interchangeable cutters Edge processing unit For soft-forming and post-forming workpieces, for processing the end edge with 0.4 - 3.0 mm edge thickness and 10 - 60 mm workpiece height 2-axis motor-controlled radius grooving unit including pneumatic retraction function Polishing unit Above and below Note: Lasdpfozuyh Isx Ag Ajf The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is non-binding.

Condition: used, Year of construction: 2009, Edge banding machine with workpiece return system Lodszuyhuspfx Ag Aoaf Manufacturer: HOMAG Type: PROFI KAR310/11/A20/S2 Year of manufacture: 2009 Technical data Note: The technical data and descriptions are a transcript of the original order confirmation. The data is for informational purposes only and is not binding.

Condition: used, Year of construction: 2005, Single-sided edge banding machine Manufacturer: IMA Type: Novimat Systems/I/R75/1000 Year of manufacture: 2005 Technical data PC control - ICOS OPEN control system Feed rate 5-25 m/min, frequency-controlled Fence with electronic positioning control Adhesive application above and below Trimming unit with 2 motors, each 4.5 kW, 9,000 rpm, controllable. - Horizontally adjustable via axis Heating element approx. 300 mm long, 2x 1.5 kW Gluing unit - Adhesive application with pneumatic quick-lock system. - Automatic PU melting system Quickmelt for 2 kg cartridges - 32-position edge magazine (8 slots up to 3 mm / 24 slots up to 1.3 mm) Vertical roller holder for 32 rollers, max. diameter 850 mm Cutting unit on the upper pressure roller with 2 motors, each 200 W, 400 V, 12000 rpm. - Horizontal pneumatic swiveling 0-25 - With controllable side contact, for 3 edge thicknesses Trimming unit with 2 motors, each 1000 W, 400 V, 200 Hz, 12000 rpm. - Operating in counter-rotation. Lodpfezuyhnex Ag Ajaf Multi-processing unit 08.348 - For chamfering or radius trimming of the upper and lower longitudinal edges, as well as for copying the front and rear workpiece edges. - Program-controlled adjustment for up to 4 profiles - 2 motors, each 660 W, 400 V, 200 Hz, 12000 rpm. Spray nozzles above and below for applying cleaning agents Multi-profile scraper unit - With stepper motor axes for horizontal and vertical positioning. - For 4 profiles. Straight scraper unit - With electro-pneumatic retraction device Copying edge smoothing unit - With 4 smoothing motors, each 250 W - Smoothing unit with 2 lower and 2 upper motors, each 180 W, 50 Hz, 1400 rpm. Smoothing unit - For smoothing and eliminating the white haze on the trimmed PVC/ABS edges - With an upper and lower smoothing zone With workpiece return system LGIMATECH ZHR 05/L/145 - Air cushion table, inclined, 2 return belts with brushing devices from below. Note: The technical data and descriptions are a transcript of the original order confirmation. The data is for informational purposes only and is not binding.

Condition: used, Year of construction: 2010, - Equipped with ISAS 28-position edge magazine Lajdjzuyhhjpfx Ag Asf - PU gluing unit - With Boomerang return system Single-sided edge banding machine Manufacturer: Homag Type: KAL 310/7/A3 Year of manufacture: 2010 Technical data - Equipped with ISAS 28-position edge magazine - PU gluing unit - With Boomerang return system Edge trimming unit with 2 motors, each 3KW, 150 Hz, 9,000 RPM. Pneumatically controlled for pre-trimming PU gluing unit 34 with PU hot melt unit - capacity max. 6 kg/h Container size 2 kg. QA glue application unit Selectable edges from the ISAS 28-position edge magazine 4 pressure rollers Release agent spray unit, top and bottom Trimming unit WK 13, bevel / straight With 2 motors, each 0.4 KW, 200 Hz, 12,000 RPM. Electropneumatic adjustment of the trimming motors to 2 positions (flush trimming and with overhang) Pre-trimming unit with 2 motors, each 0.55 KW, 200 Hz, 12,000 RPM. With double-roller scanning. With electropneumatic adjustment Shaping trimming unit FK 11 - manual For processing the edge overhangs on the top and bottom edges of the workpiece, as well as for milling the front and rear edges With 2 motors, each 0.4 KW, 200 Hz, 12,000 RPM. Universal trimming unit UF 11 With motor 4 KW, 150 Hz, 9,000 RPM. Swiveling 90°, electropneumatically controlled With HSK 63 F collet for unlocking by push-button Profile scraping unit PN 10 Pneumatic adjustment for moving sideways out of the working area Finishing unit FA11 top/bottom Consisting of: Glue joint scraping blade Cleaning agent application Buffing unit with 2 motors, height adjustment with the upper pressure Machine control via 19-inch touchscreen Return system BOOMERANG ZHR05 With air cushion table, angled, length 2,000 mm, width 1,000 mm Conveyor belt width 1,100 mm Workpiece parameters: Length 300 - 2,500 mm / Width: 60 - 1,100 mm or Length 300 - 800 mm / Width: 1,100 - 2,000 mm Thickness 8 - 60 mm For 4-sided processing: Min. part size: 300 x 300 mm / max. part size 2,000 x 800 mm With roller strip for supporting wider parts.

Condition: used, Year of construction: 2017, The BIESSE ROVER A 1643 EDGE is a comprehensively equipped CNC machining center with a 5-axis machining head and an integrated edge banding unit. Working area, X-axis: 4,320 mm Swing machining in X: 1,620 mm Working area, Y-axis: approx. 1,580-1,660 mm Travel, Z-axis: 180 mm Edge banding Working area, X-axis: 3,300 mm Working area, Y-axis: 1,540 mm Maximum loading width in Y: 1,900 mm, expandable to up to 2,100 mm 5-axis unit 5-axis machining head C-axis: continuous 360° rotation B-axis: continuous 360° rotation B-axis speed: 18 rpm C-axis speed: 18 rpm Maximum spindle speed: 24,000 rpm Power 11 kW in S1 operation 13 kW in S6 operation Additional features Maximum undercut angle: -10° Collision monitoring for the 5-axis unit Lodpfx Agezuwyzo Asaf Prepared for the use of attachments on the 5-axis unit Work table and clamping system ATS work table 8 support rails 32 adjustable consoles 32 pneumatic vacuum cups Vacuum cups adjustable in 15 steps Pneumatic system divided into 2 working zones along the X-axis Vacuum system Vacuum pump capacity: 250 m³/h Additional equipment 6 lifting bars for easier loading and unloading 28 sensors for detecting lowered stops Stops and positioning 8 rear stops 8 center stops 4 side stops (2 left + 2 right) 2 additional side stops 4 removable center stops (2 left + 2 right) 2 additional center stops Pneumatic positioning and lowering of the stops Drilling unit BH 24L drilling head 13 independent vertical spindles 5 independent horizontal spindles Grooving saw, 120 mm Maximum groove depth: 25 mm Programmable spindle speed up to 6,000 rpm Tool changer 16-position rotary magazine Mounted on the X-axis carriage For tools and attachments Capacities Maximum tool/attachment weight: 7.5 kg Maximum total load of the magazine: 55 kg Edge banding unit GU60A edge banding unit For workpieces up to 60 mm thick Edge banding speed up to 20 m/min Double pressure roller system Glue pot with hot melt system Edge heating lamp, 600 W CNC-controlled edge feeding system Automatic edge trimming Sensor for closed geometric shapes Accessories for edge machining Edge magazine 2-roller edge magazine mounted on the X-axis carriage Maximum roller diameter: 800 mm Maximum edge height: 65 mm Additional units Rounding tool 85 mm, HSK F63 Saw unit HSK F63 for cuts and grooves Maximum saw blade diameter: 215 mm Maximum saw speed: 8,400 rpm Maximum cutting depth with a 215 mm saw blade: 68 mm Post-processing Combined glue joint and edge trimming blade units Tool sets for different edge thicknesses Software bSolid basic module 2D CAD environment Import of DXF, CIX and BPP files 3D machine simulation Tool management Management of 5-axis machining through positioning Assistant-supported program creation

Condition: used, machine/vehicle number: 007956, Position 1: Roller Conveyors HOMAG-PROFI KFL 350/11/A3/WZ14 Lasdpfx Aowuudmog Asf Position 2: Single Edgebanders HOMAG-PROFI KFL 350/11/A3/WZ14 Position 3: Panel Return Systems HOMAG-PROFI KFL 350/11/A3/WZ14

Condition: used, machine/vehicle number: 007906, Position 1: Roller Conveyors HOMAG-PROFI KFL 350/10/A3/WZ Lajdowucm Aopfx Ag Asf Position 2: Single Edgebanders HOMAG-PROFI KFL 350/10/A3/WZ Position 3: Panel Return Systems HOMAG-PROFI KFL 350/10/A3/WZ

Condition: new, 0 0,4 - 3 mm Workingpiece thickness from to 9 - 60 mm Feed speed stufenlos 8 - 12 m/min. total power requirement 15 kw Dimensions (L/W/H) 4.290 x 840 x 1.690 mm Laedpfx Agjy Ay Aks Asf

Condition: used, Year of construction: 2018, Used machine Used edge banding machine from Holz-Her, model Sprint 1329 Performance, with Return system from Barbaric, type RTS 01 Edge banding machine: Year of manufacture: 2018 Lodpfxezt Twts Ag Ajaf Motorized roller bridge 1329 PERFORMANCE iTronic - Adaptive pressure and glue quantity control, automatic fine adjustment depending on the program Infeed fence, standard B20 mm Infeed fence for precise feeding of the workpiece Edge Control 19 control system with 18.5" touchscreen color display 16:9 Jointing cutter unit 1802 (2 x 2.0 kW, 200 Hz, 12000 min-1) with 2 cutter units for jointing the edge of the panel (1x forward rotation, 1 x reverse rotation) Edge feeder 1901 SYNCHRO, automatic transport of coil and strip material Glue application station Glu Jet GJ301 automatic (2.3 kW, 50 Hz) Pressure unit 1913, motorized, 1 roller driven, 2 follower rollers Spray device (release agent) after the pressure unit with 2 spray nozzles for coverage up to 60mm working height Trimming unit 1918 (60 mm), pneumatic (2 x 0.45 kW, 12000 min-1), pneumatically swiveling 0/10° Cutter unit FR701, 100% repeat accuracy at the push of a button thanks to play-free mechanics Shaping cutter unit FF701, 100% repeat accuracy at the push of a button thanks to play-free mechanics Scraping unit 1929 MOT4 incl. high-gloss package with motorized adjustment of the feeler rollers Surface scraping blade FK701 with pre- and post-sensing for removing glue residue Motorized adjustment of the infeed fence for precise feeding of the workpiece to the jointing cutter unit Automatic chain lubrication / intelligent automatic transport chain lubrication GLU JET collection container Spray device 1856 for the infeed and outfeed area: Buffing unit 1940 (2 x 0.12 kW, 50 Hz, 1400 min-1) For final polishing and edge polishing. With 2 textile discs, swivel range 0 - 5° RETURN system connection (emergency stop interlocking) Connection of a workpiece return system to the control system from HOLZ-HER Machine dimensions approx. 5600 x 1010 x 1900 mm Machine weight approx. 2100 kg Return system: Year of manufacture: 2018 Machine number: 2180122-206 Further details can be found in the PDF Availability: by arrangement Location: Röllbach

Condition: used, Year of construction: 2008, Used machine Year of manufacture: 2008 Edge Control control system with 18.5" touchscreen color monitor 16:9 Swiveling operator panel, Program storage, Motorized pressure bar adjustment, Feed via transport chain, Feed speed: 8-18 m/min Extendable workpiece support, Infeed fence with motorized adjustment Jointing unit 1961, Diamond jointing cutter for climb and counter rotation, Automatic adjustment to workpiece height Edge feed 1903 Pre-trimming up to 3 x 45 mm (depending on material) Glue application system 1905 Multi-System Automatic glue height adjustment with sensor nozzle, Lasdpfsv Sv Enox Ag Aef Pressure regulator for adjusting the cartridge contact pressure, Use of PUR adhesives possible, Pressure unit 1913 MOT, First roller driven End trimming unit 1918 with pneumatic adjustment End trim saw pneumatically swiveling, Multifunction unit 1824 MOT 4 with multifunction cutter radii 1,2,3 mm Corner copying unit 1832 Corner copying up to 3 mm edge thickness Radius scraper 1929 MOT 2 With motorized adjustment of horizontal tracing rollers With pneumatic adjustment (top and bottom separate) Chip collection box for radius scraper, Surfacing scraper 1964 For removing glue residue for a clean glue line With extraction hoods Spray unit 1856 for infeed and outfeed area Buffing unit 1940 For finishing and edge polishing ----- Technical Data ----- Edge thickness roll material: 3 mm, Edge thickness strip material: 8 mm, Max edge thickness for corner copying: 3 mm, Workpiece thickness: 45 mm, Workpiece thickness for corner copying: 45 mm, Min. workpiece length: 180 mm, Feed speed: 8-18 m/min, Distance workpiece support: 470 mm, Support table diameter for edge material: 800 mm, End cut knife for coiled material up to: 3 mm, Heating time: 3.5 min, Jointing unit power: 2 x 2 kW, End trim saw power: 2 x 0.22 kW, Milling station power: 2 x 0.35 kW, Corner copying power: 0.22 kW, Extraction port jointing unit: 120 mm, Extraction port milling unit: 70 mm, Extraction port scraper unit: 70 mm, Total length: 5,350 mm, Dimensions (LxWxH): 5,350 x 1,669 x 1,940 mm Picture of operating hours taken from a recording in 2022 Availability: short term Location: Röllbach

Condition: used, Year of construction: 2020, operating hours: 2,000 h, machine/vehicle number: LC665, Technical Specifications & Performance DataThis Tetra Pak A3/Compact Flex aseptic carton filling and capping line is configured for Prisma Edge packaging in the 250 ml format. It combines carton filling, cap application and Helix handling equipment for compact beverage production and industrial packaging operations. The available equipment is designed around the Tetra Pak filling platform and Cap30 DreamCap closure system.Manufacturer: Tetra PakFiller model: A3/Compact FlexMaximum production capacity: 9600 BPHPack format: 250 ml Prisma EdgeAvailable configuration: filler, Cap30 capper and Helix equipmentOperating hours: 2000Machine year: 2020Advanced Automation & Control SystemsThe equipment includes line control for coordinated operation of the available filling, closure application and handling sections. A controlled line architecture supports consistent product flow through the filling and capping process while allowing the individual modules to operate as an integrated packaging system. The listed configuration includes Filler, LC40, ACHX30 and Cap30 components.Production Line Integration CapabilitiesThis equipment is suitable for integration into an aseptic carton packaging line. The available filler, capper and Helix sections can be positioned with compatible upstream product preparation equipment and downstream carton conveying, accumulation, coding and secondary packaging machinery. Its Prisma Edge format configuration makes it relevant for beverage production applications requiring 250 ml carton packs.Machine typeManufacturer / modelYearFilling MachineTetra Pak A3/Compact Flex2020Capping MachineTetra Pak Cap30 DreamCap2020Various EquipmentTetra Pak Helix2020Machine Condition & Maintenance HistoryThe line is reported as running, with 2000 operating hours. The stated availability is limited to the filler, capper and Helix equipment. This condition provides a practical basis for buyers planning a second hand aseptic packaging installation, line extension or replacement project within an existing industrial packaging environment.Operational Performance & VersatilityThe A3/Compact Flex platform is intended for high-output carton filling and closure application. The Cap30 DreamCap system is matched with the listed carton format, supporting a consistent filling-and-capping sequence for Prisma Edge packs. With a maximum stated output of 9600 BPH, the equipment can support structured beverage production where compact retail carton formats are required.Installation Requirements & Site PreparationInstallation should be planned as part of a complete aseptic carton packaging layout, with appropriate product supply, utility connections, hygienic process interfaces and downstream pack handling. Site preparation should allow access for operation, cleaning, maintenance and format-specific material handling. Compatible line controls and conveying should be assessed when integrating the available modules into a used bottling line or broader industrial packaging... Ljdpfezucgmox Ag Aoaf

Condition: new, Catalog number: HZ014 – preliminary milling – edge trimming – new machine, in stock – CE certificate – professional TECHNICAL DATA panel thickness 8-45mm edge thickness 0.4 mm – 3 mm min panel width 90mm min panel length 170mm feed speed 9m/min pre-milling 12000 rpm front/rear milling 12000 rpm top/bottom milling 12000 rpm edge trimming 12000 rpm polishing 3000 rpm feed motor power 1.13kW glue tank heating power 1.315kW pre-milling power 1.5kW Lodpfozruriex Ag Aoaf pre-heating power 0.4kW glue spindle power 0.25kW front/rear milling power 0.22kW top/bottom milling power 2×0.37kW edge trimming power 0.37kW polishing motor 0.12 kW and 0.18 kW motor 6.16kW working height of the table 960mm extended support width 560mm extraction connection 3x125mm dimensions L/W/H 3731x720x1636mm weight 915kg The Holzing G-MAX 480 edge banding machine with pre-milling, saw cutting, top-bottom milling, edge trimming, radius scraping, and polishing ensures a high-quality final result on the workpiece. The veneer can be in rolls up to 3 mm thick and in strips up to 4 mm thick. The machine also has a glue tank with a capacity of 1.2 kg. Net price: 99000 PLN Net price: 23571 EUR, depending on the exchange rate of 4.2 EUR (Prices may vary due to higher fluctuations)

Condition: used, Year of construction: 2008, Connected load: 15 kW Feed speed: 14 (11) m/min Workpiece thickness: 8 - 60 mm Edge thickness: 0.4 - 8 mm Roller separation: max. 3.0 x 45 / 0.8 x 65 mm Extraction diameter: 120 / 160 / 100 mm Working height: 950 mm Dimensions: 6260 x 1560 x 2300 mm Weight: approx. 3000 kg Storage location: Supplier Ljdpfxjy Ruzqe Ag Ajaf

Condition: used, Year of construction: 1991, operating hours: 2,000 h, functionality: fully functional, machine/vehicle number: 290-02-1819, total length: 2,670 mm, total width: 1,500 mm, total height: 1,200 mm, type of input current: three-phase, overall weight: 1,200 kg, input voltage: 380 V, space requirement width: 1,800 mm, space requirement height: 2,000 mm, space requirement length: 5,000 mm, Edge sander, capable of sanding profiled strips on the first unit; the second unit is for flat sanding, and the third unit has a brush. Lodpfjzvy A Uex Ag Aeaf

Condition: excellent (used), CATALOG NUMBER 7729 TECHNICAL DATA Equipment: - Tape holder - Glue tank (granulate) - Tape feeder - Guillotine – pre-cutting the edging - Pressure rollers 2 pcs - Min. width of processed components: 50mm - Thickness of processed components: 10-40mm - Min. internal radius: 50mm - Angled gluing with 1mm thick edging, 0-45° - Edge thickness: 0.3-3mm Laodezh H Inepfx Ag Asf - Electric feed - Total power: 2kW - Compressed air pressure: 6-7 bar - Dimensions (L/W/H): 1700x1300x1550mm - Weight: 310kg ADVANTAGES – Made in Poland – Unpainted – DTR technical documentation – Very good condition – used edge banding machine Net price: PLN 6500 Net price: EUR 1550 (exchange rate: 4.2 EUR) (Prices may vary depending on larger fluctuations)

Condition: new, CATALOG NUMBER HL001 - New machine, in stock – Pre-milling unit – Radial scraper + polishers TECHNICAL DATA - Panel thickness: 45mm - Edge thickness: 0.4 mm – 3 mm - Min panel width: 90mm - Min panel length: 90mm - Feed speed: 7m/min - Pre-milling: 9000 rpm - Top/bottom: 10500 rpm - Front/back: 8800 rpm - Polishing: 2800 rpm - Main motor: 6kW - Feed power: 0.75kW - Pre-milling power: 1.5kW - Glue spindle power: 0.25kW - Top-bottom milling power: 0.18kW - Top milling power: 0.55kW - Top polishing motor: 3-phase 0.12 kW, 1-phase 0.18 kW Lasdpfxszccuuj Ag Aef - Bottom polishing motor: 3-phase 0.12 kW, 1-phase 0.18 kW - Working table height: 856mm, extended support width: 560mm - Extraction connection: 3x100mm - Dimensions (L/W/H): 3200/1200/1200mm, weight: 660kg Net price: 49,900 PLN Net price: 11,880 EUR based on 4.2 EUR exchange rate (Prices may change with significant fluctuations)