Used Eitec Gmbh for sale (70,643)

Condition: used, Year of construction: 2017, pipe diameter (max.): 80 mm, mandrel length: 4,500 mm, Mandrel bending machine S8004 ----- For the production of dimensionally accurate pipe geometries with bending radii of up to 1.5XD → maximum bending performance pipe 76 x 4 mm (400 N/mm²) → maximum bending performance pipe 60 x 60 x 3 mm (400 N/mm²) → maximum bending performance pipe 76 x 2.9 mm (stainless steel) → total connected load 7 kW → pipe length 4.5 mtr Robust and durable steel construction in a force-locking connection - no construction susceptible to torsion due to, for example, the split construction of the bending head and mandrel carrier. Maintenance-free electromechanical drive of the bending axis. The touch display of the control enables simple and intuitive programming and use of the system. After the pipe has been pushed on, it is fixed in the carriage by the chuck. This enables the pipe to be positioned precisely and thus the creation of dimensionally accurate geometries. The standard also includes checking the pipe geometry before the bending process: If the bending process is started in the wrong position, the machine does not give permission for this. This prevents incorrect operation. Optional additional features provide more convenience and increase the output and thus the efficiency of the system. Data is exchanged from the optional pipe calculation program TBS-3D (PC version) via USB stick or via FTP access from the computer to the machine control system. USB or LAN connectors (RJ45) are available as standard. Existing pipe geometries can be converted quickly and easily, for example, using the STEP format. Standard equipment: → Electromechanical drive of the bending axis 4 kW → Speed 2.9 rpm (=17°/sec.) → Bending direction left → Bending angle resolution 0.1° → Max. bending radius 200 mm → Bending shaft diameter 50 mm → Electronic length measurement ±0.1mm → Electronic twist measurement ±0.1° → Manual stop system (overtravel stops in length) → Manual locking system (15° in twist) → Three-jaw chuck for locking the pipe in the carriage → External control panel PLC control: → Touchscreen 10.1" → ETH 10/100, X2X Link, USB → Foot switch operation → Data transfer via network (W)LAN or USB → Material database Unique graphic programming: Simple geometries can be calculated directly on the machine. The control calculates the feed values directly after entering the length and angle and the bending angles. Hydraulics: → Hydraulic power 3 kW → Hydraulic pipe clamping with adjustable clamping pressure → Programmable early mandrel retraction Options (can be ordered as additional equipment): → Variable bending speed using frequency converters or servo motors → Automatic tool retraction (manual or controlled) → Pneumatic chuck → Automatic mandrel lubrication → Pneumatic stop system (length + twist) → Mobile version (rollers) → Radius extension Gjdjttah Rjpfx Aabjuh Pictures show new machine

Condition: excellent (used), Year of construction: 1997, operating hours: 110 h, The machine was located at a university and used exclusively for teaching purposes. It was in use for only 110 hours. Name: Twin-screw laboratory extruder Manufacturer: Leistritz Extrusionstechnik GmbH Type: MICRO 27 GL / 32D Year built: 1997 Gsdpfx Aaexlpzfjbjuh Speed: 400 rpm Operating voltage: Electrical connection values: 400V, 50Hz Control voltage: 230V Hours of operation: 110 hours Driving force: 8,4 kW, Input speed: 2200 rpm Dimensions: Extrusion height: 1050 mm Length: approx. 2500 mm Width: approx. 800 mm Height with control panel: approx. 1900 mm Total weight of the extruder: approx. 950 kg. Technical doc.: Yes Message: Screw diameter: 27 mm, Screw length: 32 D, Screw flight depth: 4.3 mm, Screw rotation direction: co-rotating / counter-rotating, Screw speed range: 10 - 400 rpm, Total screw torque: 200 Nm, Screw back pressure (continuous operation): max. 200 ba,r Gear ratio: i = 5.38 Accessories: Dosing machine, nozzle hop / LSA tool, vacuum unit, temperature control unit, cooling belt (stainless steel version), Strand pelletizer, granulator, profile downstream. Condition: Used very good Price: By request

Year of construction: 2025, condition: new, Zig Zag Air Sifter Sizes/ wides from 200mm - 1800mm Precondition for the separation are differences in the material like: - Different sizes of particles - Differences of the density - Differences in the surface condition of the particle - Differences in the form of the particle - Grain size 0.1mm - 40mm, (bigger particles are possible with a special design) Godpfx Aaschb Ruobsuh We are the manufacturers of these plants and we build Zig Zag Sifter Plants in different sizes see attachment. In order to make you a definite offer we need to know some points: 1. What material you want to separate? 2. Grain-size of the material? 3. Bulk weight kg/liter of your material. 4. We have technical center at our house, where we can test your material.

Condition: used, Portal milling machine, used. The machine is operational. 5-axis CNC control X-axis (support) Y-axis (table = movable platen field) Z-axis (ram) W-axis C-axis on the ram Gujdpfx Aaowz H E Aebjh Tool spindle in the ram Dockable tool heads (can be docked to the C-axis on the ram) 1x fork-type milling head (A-axis) 1x 90° angle head 1x short extension 1x long extension Machine frame (2 columns, crossbeam, girder) - Machine bed: 13,000 mm - Machine table: 6,000 x 3,000 mm, max. workpiece weight (6,400 kg/m²) Portal clearance: Height x width: 3,000 x 3,370 mm Distance between clamping surface and lower edge of milling head: 0/1,600 mm - Height-adjustable crossbeam - CNC control (Heidenhain) - Fork-type milling head – 2-axis controlled (C-axis, A-axis) - Electrical equipment: 3x400 V/50Hz - 1 main spindle drive motor (Heidenhain, 50 kW) - Servo motors (X, Y, and Z) Heidenhain - Air-conditioned electrical cabinet - Metric configuration - Coolant system - Band filter system with high-pressure pump - 2 hinged belt chip conveyors - Paint (RAL 7035, etc.) - Standard accessories - CE compliant

Condition: good (used), Year of construction: 1996, Rumed Type 3300 Refrigerated Incubator • Manufacturer: Rubarth Apparate GmbH, Laatzen (Germany) • Type: 3300 • Serial number: 72258.4 • Year of manufacture: 1996 • Power: 1.0 kW • Operating voltage: 230 V / 50 Hz • Current consumption: 4.4 A • Refrigerant: R134a • Filling weight: 0.99 kg • Maximum operating pressure: 18 bar • Made in Europe, CE marked Description & Applications: The RUMED Type 3300 is a professional refrigerated incubator for laboratory applications. Ideal for: • Microbiological cultivation Guodpfxjxl Awge Aabeh • Long-term sample storage • Climate-controlled stability tests • Research and development Internal dimensions: W/D/H: 575/550/510 mm Note: For detailed technical specifications and processing instructions, we strongly recommend consulting the original data sheets or contacting the manufacturer directly. You can find more items – new and used – in our shop! International shipping costs upon request!

Condition: as good as new (ex-display), Year of construction: 2024, functionality: fully functional, total height: 2,140 mm, total width: 1,040 mm, load capacity per storage section: 900 kg, overall weight: 555 kg, number of drawers: 5, !KNIFE RETURNS! Directly from the manufacturer, the original from the patent holder Apfel GmbH. with 5 vertical pull-outs, each 180 mm wide and a max. load of 900 kg per pull-out. Dimensions: W= 1040mm, D=1050mm, H=2140mm Gusdpfx Asuudgzeabjh two-tone powder-coated Housing: black-grey, textured (RAL 7021) Pull-outs : black-grey, textured (RAL 7021) Product code: 94032080 Swiss commodity code: 9403.2010 Origin: DE/08 Weight: approx. 555 kg Completely assembled as a set incl. - 50 storage trays - Sample kit with boxes and dividers

Condition: new, functionality: fully functional, Year of construction: 2025, Manual Pipe Bender HRB-3D 850 for bending pipes and solid material up to a maximum of 12 mm Precise positioning and repeatable bending are ensured by three battery-operated digital displays that precisely show the bending angle, pipe feed, and pipe twist. Gujdpfx Aaettagdjbjh - 80 mm three-jaw chuck - Feed stop system - Feed length approx. 850 mm The manual pipe bender should be permanently mounted on a table or frame (not included). We would be happy to provide you with a detailed quote if you send us your complete company address, email address, and contact details.

Condition: used, We are selling a used robotic grinding and polishing system. The system is in good used condition. The system includes: - 1x YASKAWA MH20 industrial robot with NX100 controller - 2x belt grinding machines for grinding belts with a circumference of 3,500 mm - 2x polishing machines with oscillation and feed for polishing discs with a maximum diameter of 500 mm - 1x loading table for pallets with dimensions (LxW): 1,200 x 600 mm - 1x control cabinet Guodexlufvspfx Aaboh If you have any questions, please do not hesitate to contact us!

Year of construction: 2025, condition: new, To sieve dry material: like flour-, grainy-, and granule-shaped material. Sizes from: wide 500-1500mm / length 1200-2400mm Godpfxschb Ryo Aabeuh Sieve layers: 2 - 4 layers, granulation 0,1-18mm freely selectable.

Year of construction: 2022, operating hours: 596 h, condition: used, functionality: fully functional, overall weight: 10,500 kg, total length: 6,050 mm, total width: 2,450 mm, total height: 2,700 mm, machine/vehicle number: B0402, EDDY ACTIVE is an eddy current separator with an eccentric pole wheel for metal sorting. The magnetic system enables highly efficient separation of non-ferrous metals from various waste streams thanks to its exceptional strength. • Very powerful eccentric magnetic system • Automatic splitter adjustment • Integrated belt tracking control Gusdpjxgdg Esfx Aabeh • Rotating belt scraper • Robust and compact design • Low maintenance This module is part of our rental fleet.

Year of construction: 2025, condition: new, functionality: fully functional, Aluminium box body for Iveco 70 C with 3 roller shutters, 3000-litre stainless steel water tank with 2 cleaning hatches. The box and tank are fully mounted on a subframe for Iveco All-Wheel Drive 70C. Gsdpfx Aexlkpksabouh

Condition: excellent (used), machine/vehicle number: 958-008, Diosna double spiral mixer and dough chunker. MIXER: 1 x Diosna double spiral mixer with bottom discharge and supplied with 2 x bowls. This unit is able to connect to silo and dosing systems.  Technical specification ⚙️ ✅ Model - DSP 280E.  ✅ Serial number - 958-008.  ✅ Bowl capacity - 280 kg dough.  ✅ Electrical requirements - 400 V / 50 hz / 3 phase.  ✅ Power - 49.2 kW / 87 Amps.  Gsdoxni Drepfx Aabouh CHUNKER: 1 x Diosna dough chunker.

Condition: like new (used), Year of construction: 2023, Mandrel Bending Machine S4501 ---- For the production of pipe geometries with bending radii from 1.5xD → Maximum bending capacity: pipe 42.4 x 3.25 mm (steel max. Re 240 N/mm²) → Maximum bending capacity: pipe 30 x 30 x 3 mm → Maximum bending capacity: pipe 42.4 x 2 mm (stainless steel max. Rp0.2 260 N/mm²) → Total connected load 3 kW → Pipe insertion length approx. 1.5 m Robust and durable steel construction. Maintenance-free servo drive for the bending, feed, and twisting axes. The control system's touchscreen display enables simple and intuitive programming and operation of the system. After the pipe is inserted, it is secured in the carriage by the chuck. This enables precise positioning of the pipe and thus the creation of dimensionally accurate geometries. The standard also includes a check of the pipe geometry before the bending process: If the bending process is started in the wrong position, the machine will not issue a release. This eliminates the risk of incorrect operation. Optional additional features provide greater convenience and increase output, thus increasing the efficiency of the system. Data exchange from the optional TBS-3D pipe calculation program (PC version) takes place via USB stick or network. Existing pipe geometries can be imported using the software. Standard equipment: → 1.5 kW servo drive for the bending axis → Adjustable speed → Left-hand bending direction → Bending angle resolution 0.1° → Max. bending radius 120 mm → Bending shaft diameter 50 mm → Feed servo drive → Rotation servo drive → Three-jaw chuck for locking the tube in the carriage → Pneumatic tool retraction Hydraulics: → Hydraulic tube clamping with adjustable clamping pressure → Programmable early mandrel retraction PLC control: Godjtr U Hljpfx Aabsuh → 10" color touchscreen → ETH 10/100, X2X Link, 2xUSB → Foot switch operation → Data transfer via LAN or USB network → Material database Unique graphical programming: Simple geometries can be calculated directly on the machine. The control system calculates the feed values and bending angles directly after entering the length and angle. Power consumption: 400V 16A Dimensions: L: 2.3 m x W: 1m x H: 1.4m Weight: approx. 1200 kg

Condition: new, Make: S&F GmbH Type: MFB-500/8 Gujdpfjxk Tg Nox Aabjh Belt width: 500 mm Centre distance (A-A): 8,000 mm Conveying capacity: approx. 30 - 40 m³/h (at 0 ° incline) Drive: Drum Motor Motor power: 2.2 kW, 400 V, 50 Hz Belt speed: approx. 1.25 m/s Drive drum: Drum diameter 220 mm Tensioning drum: Drum diameter 220 mm with spindle tensioning station Belt: EP 250/2 2:1 rubber inclined conveyor belt with V-profile (15 mm) Machine weight: approx. 800 kg Machine colour: RAL 6011 reseda green Suitable for the following bulk materials, among others: Potatoes, Wood chips, sawdust and sawdust, biomass, wood pellets, charcoal, waste wood, bark, soil, humus, recycling material, cross-cuts and much more. Accessories (optional): Feed hopper (filling hopper), inner belt scraper, chassis, tow bar, steel support, electrical installation (16 A plug-in switch) Troughed conveyor belt | troughed belt conveyor | conveyor belt | bulk material conveyor | belt conveyor | inclined conveyor belt

Year of construction: 2025, condition: new, Circle Sievemachine to sieve dry material: like flour-, grainy-, and granule-shaped material. Sizes from: wide 500-1500mm / length 1200-2400mm Sieve layers: 2 - 4 ply, granlulation < 18mm freely selectable. Gedpfx Asbcngijabouh

Year of construction: 2023, operating hours: 343 h, condition: used, functionality: fully functional, overall weight: 10,300 kg, total length: 6,050 mm, total width: 2,450 mm, total height: 2,700 mm, machine/vehicle number: B0302, This module is suitable for nearly all materials (including moist or highly abrasive materials). Perfect technical screening even at high throughputs is achieved through the combination of 3D screening panels on the upper deck and tension mat technology on the lower deck. This combination enables almost blockage-free screening at accelerations of up to 50G – keeping your screening panel clean at all times. This machine is part of our rental fleet. Gsdpfxexgda Ej Aabjuh

Condition: good (used), Year of construction: 2004, functionality: fully functional, Manufacturer: HABERMEHL Anlagenbau GmbH Address: Hauptstr.1, 35510 Butzbach-Ebersgöns, Germany Type: EH 400/1 Serial number: 901 Year of manufacture: 2004 Voltage / Frequency: 400 V / 50 Hz Rated power: 3 kW CE-certified: Yes 🛠️ Device Description Industrial shredder or crusher (Shredder/Granulator). Notable features visible in the photos: - System with rotating knives (shredding unit) on a 2 mm shaft Gujdjw Niuhspfx Aaboh - 3 kW SEW motor and reduction gearbox - 8 mm screen (the screen is labeled “8 mm Sieb”) – determines the output particle size - Rollable, portable design - Material discharge container and lower motor drive system Machines of this type are typically used for shredding the following materials: - Plastics - Rubber - Wood - Light metal chips - Electronic scrap 📝 Technical information you should request If you require further details, you may request the following information from the supplier or manufacturer:

Condition: used, Year of construction: 2009, operating hours: 20,536 h, pressing force: 80 t, filling opening width: 1,100 mm, filling opening length: 1,400 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 600 kg, empty load weight: 16,000 kg, Technical data baler: Manufacturer Avermann Maschinenfabrik GmbH & Co. KG, Germany Type AVOS 1410-45/80 Year of construction 2009 Operation hours 20,536 hours, as of September 2024 Press power main press 80kN Specific press force 103,9 N/cm² Feed channel 1,400 x 1,000 mm Theoretic cycle time 12 sec Theoretic throughput capacity 300 m³/h Bale size 1,100 x 750 (w x h), the length is variable Drive power 45 kW Connected load 75 kW Tying system 4-fold, vertical, fully automatic Throughput capacity at a bulk weight of 30 kg/cbm approx. 6,0 t/h Guedpfsu Thypex Aabsh bulk weight of 50 kg/cbm approx. 10,5 t/h bulk weight of 100 kg/cbm approx. 17,5 t/h Bale weight with a bale length of approx. 1.2 m up to 600 kg, depends on material SPS controller Siemens S7-300 Operating panel pulsotronic Baler dimensions built up 8,610 x 2,400 x 3,835 mm (l x w x h) Transport weight baler approx. 16 t Special equipment: Wear-resistant floor made of HARDOX steel Special press ram for pressing ‘difficult’ materials and loose bulk materials with small grain sizes Control cabinet air conditioning Machine foot elevation 200 mm Remark: The machine is currently in our workshop undergoing partial refurbishment. We expect the refurbishment work on the machine to be completed by the end of October, after which the machine will be tested and released for sale.

Year of construction: 2025, condition: new, functionality: fully functional, Semi-automatic depaneling / basic machine with parallel shuttle The dynamic depaneling machine LOW 4322 XL is especially suited for medium to high product volumes and meets growing demands in the production process. Printed circuit board blanks of various materials are separated using low-dust and low-stress sawing and milling techniques with maximum product flexibility, precision and throughput. Highly dynamic linear motor axes, tools and grippers meet the highest quality requirements and guarantee the depaneling machine a long service life and high reliability. Guedpsvuw R Rsfx Aabeh Semiautomatic depaneling - solutions on demand The LOW 4322 XL depanelling machine enables fast product changeover while maintaining short depanelling and handling times. The blank printed circuit board is inserted with a parallel shuttle, picked up and fixed with pin clamping technology and, if necessary, in combination with vacuum suction cups. Made in Germany The machine is equipped with: - a shank and slice tool separation module on Z-axis (automatically rotatable 0-90) - X-Y cross table module in linear motor technology with high-resolution measuring system - 2-compartment loading module built as parallel shuttle, separated left and right with sliding doors - Steel welding frame with two maintenance doors - left and right. ESD - standard vision system base module for teach-in programming - Working area is 520 x 480mm - Automatic cutter length processing - Remote maintenance/support via remote connection - Touch IPC with Windows 10 Pro operating system - Laser axis measurement incl. protocol - Air ionization - Cutter breakage control for end mills only - Preparation for vacuum clamping technology - ESD powder coating, RAL 9002, disc and sliding doors Optionally a vacuum cleaner unit can be offered later.

Year of construction: 2015, condition: used, Waste water neutralisation Capacity: 8 m3/h Operation / Control: Control cabinet with touch-screen display / WAGO Features: Neutralisation vessel (37 hl); final control vessel (4,5 hl); caustic vessel; acid vessel; pumps; process measurement, instrumentation and control technology; control cabinet Guedpfxoxbqr Dj Aabjh

Year of construction: 2025, condition: new, Circle Sievemachine to sieve dry material: like flour-, grainy-, and granule-shaped material. Gusdpfxebcnatj Aabsh Sizes from: wide 500-1500mm / length 1200-2400mm Sieve layers: 2 - 4 ply, granlulation 0,1-18mm freely. selectable.

Year of construction: 2024, operating hours: 150 h, condition: used, functionality: fully functional, overall weight: 9,600 kg, total length: 6,050 mm, total width: 2,450 mm, total height: 2,700 mm, machine/vehicle number: B0704, SENSOR IDENTIFY is an induction sorter that separates input materials based on their electrical conductivity. If required, it can also be equipped with a color camera system to additionally detect shape and color. This enables versatile and precise sorting of materials with different electrical conductivities, such as metals and non-metals. The ejection of detected particles is carried out using compressed air. This module is part of our rental fleet. Gsdoxgc Iuepfx Aabjuh

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: LAS 23, The mobile laser LAS 23 portable is characterized by its compact design. Small, handy and with custom-made attachments that can be individually exchanged in the quick-change system. With its mobile base, it can be moved to the workpieces to be marked. This makes it suitable for small, large and heavy workpieces. Guedpeu Smd Ssfx Aabjh With the powerful laser software, texts, numbers, 2D codes, QR codes and logos can be realized with just a few clicks without extensive programming knowledge. Serial and item numbers are automatically counted up by the software after prior setting. In addition, the software can read data (variable information such as drawing numbers, project designations, etc.) from existing tables and automatically transfer them to predefined areas. The use of a hand scanner is also possible. Made in Germany - Fiber laser 30W (optional: 20W, 50W) - Laser class 1 - Wavelength 1064nm - Marking field size 70x70mm (optional larger) - marking software EZCAD in German / English - Pilot laser (simple preview, clear text preview) - Laptop incl. holder with Windows operating system - Structure made of aluminum profile - Connection 230V including cable reel - air cooled - Dimensions: approx. 350 x 605 x 1080mm (LxWxH) - Weight: approx. 40 Kg - weight of portable laser unit 2,8 Kg - Extraction integrated

Year of construction: 2025, condition: new, functionality: fully functional, The LAS 22 is a compact tabletop unit with a small working area, ideally suited for small parts. Due to its small size, the unit is very practical and can be used anywhere. The device is very easy to operate without programming knowledge. With the powerful laser software, texts, numbers, 2D codes, QR codes and logos can be realized with just a few clicks and without extensive programming knowledge. Serial and item numbers are automatically incremented by the software after prior setting. In addition, the software can read data (variable information such as drawing numbers, project designations, etc.) from existing tables and automatically transfer them to predefined areas. The use of a handheld scanner is also possible. The standard equipment includes a laptop with Windows operating system and laser software. Optionally, the laser model LAS 22 can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. - Fiber laser 30 Watt (Optional: 20 Watt) - Laser class 1 - Wavelength 1064nm - Marking field size 110 x110mm - marking software EZCAD in German / English - Pilot laser (simple preview/contour) - Focus finder (simple focusing) - Max. Component height approx. 95 mm - Grid holes for fixtures - Clamping area 310x190mm - Electrically adjustable Z-axis - Electric door with pinch protection - optional: exhaust system (incl. activated carbon filter) - Welded steel plate construction - Connection 230V - Air cooled - Laptop with Windows operating system (German or English) - dimensions: LBH 600x 400x 690 mm - weight: approx. 45 Kg - low operating costs Gujdpfx Aajwkpxkebsh - marking of various materials

Year of construction: 2025, condition: new, functionality: fully functional, The universal laser marking system LAS 28 XLe from Systemtechnik Hölzer GmbH can be used for a very wide range of marking applications. With the integrated fiber laser you can mark almost all materials such as steel, carbide, aluminum and plastics. Depending on the requirements, the system can be equipped with a 20, 30 or 50 watt fiber laser. For permanent marking, the use of the laser is necessary in many industries. With the powerful laser software, texts, numbers, 2D codes, QR codes and logos can be realized with just a few clicks without extensive programming knowledge. Serial and article numbers are automatically incremented by the software after prior setting. In addition, the software can read data (variable information such as drawing numbers, project designations, etc.) from existing tables and automatically transfer them to predefined areas. The use of a hand scanner is also possible. The standard equipment includes an integrated PC with Windows operating system and laser software. Optionally, the laser model LAS 28 XLe can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. Further options, such as lateral extension arms for marking long parts, movable Z-axis, drawer systems, etc., can be realized. Made in Germany Fiber laser 30W, 20 W or 50 Watt - Laser class 1 - Wavelength 1064nm - Marking field size 150x150mm (optionally larger) - marking software EZCAD in German / English - optional: rotary axis (3-jaw chuck) - optional: digital height measuring system - optional: autofocus system - optional: exhaust system (incl. activated carbon filter) - pilot laser (simple preview, contour preview) - focus finder (simple focus adjustment) - signal light for indication of operating status Gjdsunh H Sspfx Aabsuh - max. component height approx. 300mm - electrically adjustable Z-axis - Integrated PC with Windows operating system - frame made of aluminum profile - air cooled - Door width approx. 700mm / door height(pass-through): 400mm - Connection 230V - Dimensions: approx. 900 x 800 x 1900 mm (LxWxH) - Weight: approx. 100 Kg