Used Elumatec Sbz 140 for sale (110)

Year of construction: 2006, condition: used, 3-axis machining center with automatic 8-way tool changer for aluminum, PVC or steel profiles Max. processing length: 7200 mm Max. travel Y-axis: 480 mm Max. travel Z-axis: 325 mm E 500 control Speed infinitely adjustable up to 6,000 rpm minimum quantity spraying 2 angle heads High-speed spindle clamp detection and displacement 8 pneumatic material clamps Pendulum operation possible through 2 light barrier areas Loading included in the price Weight: approx. 5,000 kg Ledpeu T Nm Nsfx Adwehb

Year of construction: 2004, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 20095 / 2004 / 05, Bidding obligates you to pick up the item on time by 05/09/2025! Loading of the machine will be carried out by the seller! The industrial PC of the machine, valued at approx. €13,000, was replaced in 2023! TECHNICAL DETAILS Processing length: 8 m EQUIPMENT Shown angle heads Toolholders Lhjdpfx Ajw Nql Uedweb

Year of construction: 2000, condition: repair required (used), functionality: limited functionality, machine/vehicle number: 1500050136, Technical data: - Travel X-axis: 7300mm - Travel Y-axis: 1000mm - Travel Z-axis: 650mm - Swivel angle A-axis: 0-90° freely programmable - Swivel angle C-axis 0-355° freely programmable - Max. processing length without front-side processing: 7300mm - Max. processing length with front-side processing: 6980mm - Tool changer with 10 places and a saw blade holder Bo72Ttwr8E - 9 material clamps - Tool holder SK30 - 2-layer processing Lhedpsv Avg Hefx Adwob

Year of construction: 2006, condition: good (used), functionality: fully functional, Technical Specifications - Elumatec SBZ 122/20 Year 2006 16KW General Data Measurement width: 4622.8 mm Measurement depth: 1828.8 mm Lsdew A Ipfepfx Adwshb Measurement height: 2489.2 mm Machine weight: 1814.9 kg Main Drive Spindle speed range: 21,000 rpm Spindle motor power: 8.5 HP Axis Travel X-AXIS Travel: 3777 mm Y-AXIS Travel: 350.5 mm Z-AXIS Travel: 279.4 mm Machine can be seen in operation in department 76 Available from week S38/S39 Price includes loading

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, machine/vehicle number: 1500050123, rotational speed (max.): 18,000 rpm, working length: 12,000 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Ljdpfx Adsxnz Ivswjhb Max. speed: 18,000 rpm Machining length: 12 m Pneumatic collets: 20 pcs MACHINE DETAILS Electrical data Voltage: 400 V Phases: 3 ~ Frequency: 50 Hz Current draw: 76 A Operating pressure: approx. 8 bar EQUIPMENT Automatic tool changer Angle head

Year of construction: 2001, condition: used, Pictures to follow - machine is being overhauled Technical data: Ljdpst Ea Tfofx Adwshb - X-axis travel: 7300mm - Y-axis travel: 1000mm - Z-axis travel: 650mm - Swivel angle A-axis: 0-90° freely programmable - Swivel angle C-axis: 0-355° freely programmable - Max. Machining length without end face machining: 7300mm - Max. Machining length with end face machining: 6980mm - Tool changer with 10 places and a saw blade holder - 9 material clamps - SK30 tool holder - 2-layer machining

Year of construction: 2005, condition: excellent (used), functionality: fully functional, elumatec SBZ150 Profile Machining Centre 6.0 m 5-axis control. Efficient machining of aluminium and steel profiles Working length: 6,000 mm Description: Short tool change times; Automatic tool changer for eight standard tools and three special tools (saw blade, special milling cutter diameter 50 mm, angle head or special milling cutter diameter max. 100 mm); Six-sided machining; Underside machining with angle head (option); Rapid base positioning (up to 60 m/min) of the processing unit in the X-axis; Low-wear direct drive; With automatic clamp detection and positioning; Dual-circuit clamping system with two pneumatically retractable stops; Standard with automatic central lubrication system; Robust machine bed for a working length of 6,000 mm; Continuous support table; Clamping system with integrated six-row recirculating roller units and linear guides. 5-axis industrial PC control, with 3 axes for path control; High-dynamic three-phase servo drives with resolver and digital servo controller; Swivel angles of the A and C axes freely programmable; With color screen and disk drive; Memory capacity of over 200,000 sets; 3 serial and 1 parallel interface for online connection; Barcode scanner, label printer, etc. Integrated network card 10/100 MBit, RJ 45 port (network connection by customer’s IT administrator) Analog modem (customer must provide an analog telephone line) Technical data: Travel range X-axis: max. 6,240 mm Max. travel speed 60 m/min. Travel range Y-axis: 1,000 mm Max. travel speed 30 m/min Travel range Z-axis: 635 mm Lhsdpfxjw A Rv Ie Adwjb Max. travel speed 30 m/min. Swivel angle A-axis: 0-90° freely programmable Swivel angle C-axis: 0-355° freely programmable Further details on the milling range see drawing no. 150 05 17 08 Max. processing length for face machining left + right: 6,000 mm (with tool length 150 mm) Positioning accuracy: X-axis +/- 0.1 mm / 1 m length Y-axis +/- 0.1 mm Z-axis +/- 0.1 mm Milling spindle: Speed [rpm]: up to 100–22,000 Power [kW]: 15 Tool holder: HSK-F 63 Milling cutter diameter: 100 mm max. Saw blade diameter: 400 mm Tool length: max. 150 mm from nominal taper. Included accessories: Automatic tool changer (without tool holders); Dual-circuit clamping system with 2 pneumatically retractable material stops; Automatic clamp detection and positioning; 8 horizontal pneumatic material clamping units; Tool presetting gauge Front light barrier Saw blade D400 with mount Angle milling head Important: The profile machining centre is fitted as standard with front light barriers. Any necessary side or rear guarding must be supplied on-site by the customer or please request an offer for safety fences from us. Incl. Angle milling head for underside machining

Condition: good (used), Year of construction: 2009, functionality: fully functional, machine/vehicle number: 122009984, travel distance X-axis: 3,850 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 280 mm, rotational speed (max.): 24,000 rpm, number of slots in tool magazine: 8, No reserve price - guaranteed sale at the highest bid! For milling, drilling and thread cutting work on aluminum, PVC and thin-walled steel profiles for applications in window, facade and metal construction! CONDITION Spindle: New bearings Frequency converter: Recently replaced Tool change: Automatic tool change requires a new sensor - little effort TECHNICAL DETAILS Areas of application: Aluminum, PVC and steel processing Software/control: PC-based EluCam software Processing area X-axis travel: 3,850 mm Lsdpfjvyg Szsx Adwehb Y-axis travel: 350 mm Z-axis travel: 280 mm Feed rates (rapid traverse) X-axis: 60 m/min Y-axis: 30 m/min Z-axis: 30 m/min Spindle Power: 7 kW Max. speed: 24,000 rpm Tool holder: HSK-F63 angle head (as new, hardly used) Tool changer Type: Automatic tool changer Places: 8 Vices Number: 12 pneumatic double vices Safety equipment Included: light barrier and safety fence MACHINE DETAILS Machine weight: approx. 2,000 kg Dimensions: approx. 5.1 x 3.4 x 2.6 m

Year of construction: 2013, condition: good (used), functionality: fully functional, machine/vehicle number: 6300001143, elumatec sawing center type SBZ 630/01 - maximum profile length 7.500mm - feed magazine for 7 profiles with 200mm width - 90° cuts over Y/Z axis - 45°-90°-135° tilting over Y/A axis - 45°-90°-135° tilting over Z/C axis Lhedetpcg Nopfx Adwob - controlled material clamping - saw motor power 7.5 kW - controlled saw feed - including automatic chip removal belt Machine can be viewed working and will be available July 12

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 20186/2006/01, travel distance X-axis: 7,200 mm, travel distance Y-axis: 480 mm, travel distance Z-axis: 325 mm, rapid traverse X-axis: 60 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, feed length X-axis: 7,200 mm, feed length Y-axis: 480 mm, feed length Z-axis: 325 mm, controller manufacturer: Elumatec, workpiece length (max.): 7,200 mm, spindle speed (max.): 6,000 rpm, spindle motor power: 5,500 W, number of spindles: 1, number of slots in tool magazine: 8, input voltage: 400 V, type of input current: three-phase, Equipment: rotational speed infinitely variable, 2006 Elumatec SBZ 130 Profile Machining Centre – High-Performance Aluminium CNC Machine 📍 Location: Ireland 🛠️ Machine Type: 3-Axis CNC Profile Machining Centre 📅 Year of Manufacture: 2006 ✅ Condition: Very Good / Fully Operational 🔧 Brand: Elumatec – German Engineering Excellence 🔧 Machine Description: The Elumatec SBZ 130 is a high-precision CNC profile machining centre designed for efficient and versatile processing of aluminium, steel, and stainless steel profiles. With fully automatic 3-axis control and flexible machining capabilities, it's ideal for manufacturers in the window, door, façade, and industrial profile fabrication sectors. 🧰 Included Features & Equipment: Automatic Tool Turret with 8 Tool Positions • Holds standard tools or angle milling heads • Rapid rotation ensures minimal tool change times 2 x Angle Milling Heads – included for advanced profile cutting Automatic Length Measurement – improves precision and workflow Two Independent Machining Zones – for pendulum operation and non-stop production Tool Spindle with Additional Axis Functionality – enhances machining flexibility All Operations Performed with Stationary Profile Bar • Protects profile surface during milling, drilling, and threading Multi-position Pneumatic Clamping System Coolant & Minimum Quantity Lubrication System (MQL) Tool Holders in photos Included This 2006 model is in very good condition, fully functional, and ready to be put into service. 📐 Technical Specifications: X-axis Travel (Longitudinal): 7,200 mm Y-axis Travel (Transverse): 480 mm Z-axis Travel (Vertical): 325 mm Spindle Power: 5.5 kW Max Spindle Speed: 6,000 rpm X Axis Rapid Traverse: 60 m/min Y Axis Rapid Traverse: 30 m/min Z Axis Rapid Traverse: 30 m/min Tool Changer: Automatic 8 position magazine Angle Milling Heads: 2 Angle Milling Heads Speed: 10,000 rpm Control System: Elumatec ELMU with full NC control Machining Capabilities: • Drilling, Routing, Tapping, Notching, Slotting • Machining on 3 sides of the profile without repositioning Clamping System: Pneumatic profile clamps (movable and programmable) Compressed Air Connection: 7 Bar Compressed Air Consumption: 75 L/min with spraying Cooling/Lubrication: Minimum quantity lubrication (MQL) system Operation: Front-loading with safety light curtain 🧰 Machine Includes: Multi-position automatic tool changer Angle Milling Heads x 2 Pneumatic profile clamping system Cooling/lubrication system Operator control console Selection of tool holders as seen in photos 💡 Key Features & Benefits: German-built machine with exceptional reliability High-speed 3-axis control for complex machining tasks Machining without profile repositioning – improved productivity Perfect for aluminium window & door fabrication, curtain wall profiles, industrial extrusion machining Lhedpfx Ajwwau Njdwjb Can be integrated into automated production lines Ready to work – tested Elumatec SBZ 130 for sale used Elumatec machining centre CNC aluminium profile machining centre 3 axis profile router, aluminium window door CNC machine Elumatec CNC machine Ireland CNC notching machine used façade profile machine high-speed CNC profile mill Elumatec SBZ CNC profile router

Year of construction: 2010, operating hours: 11,200 h, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 12222321222, Equipment: type plate available, Elumatec SBZ122/33 profile machining center, year 2010 Technical data: Lodpfx Aow Rv A Ujdwehb Working area: X - 3850 mm, Y - 350 mm, Z - 280 mm Electrospindle 10 kW - max. 20,000 rpm (overhauled in 2023) (RF-HSK-F63 125/125x430 24/6.5) Tool holder HSK-63 F Tool changer Work table with 4 clamps with automatic positioning Pneumatic clamping operation Photoelectric safety barrier Operator handheld terminal Control panel workstation USB connection Operating software: Windows 7 system Production software: EluSoft, EluCAM Numerical control: Ferrocontrol Protective fencing with doors (laser safety barrier) Automatic and central lubrication of linear guides Weight: 1,940 kg Total connected load: approx. 14 kW Machine dimensions: 4,670 x 2,000 x 2,540 mm Required space: 5,165 x 3,000 x 2,540 mm Machine used for aluminum profile processing. Serviced and ready for operation.

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, We are selling a CNC machine. Price 36000. We also have a complete line for the production of PVC and aluminum windows and doors Lhjdpfx Adew Rnl Ijweb

Year of construction: 2010, condition: excellent (used), functionality: fully functional, SBZ 122/33 Profile Machining Center 3.8m, WK 4x90°, eluCam Description: Efficient machining of aluminum, plastic, and steel profiles Working length: 3800 mm Automatic clamp positioning Complete profile machining with stationary profile bar to protect the profile's visible surface. Latest generation CNC 3-axis control with industrial PC based on Windows XP 15" flat-screen monitor and 2 USB ports for online connectivity, barcode scanner, and label printer. Network connection: RJ 45 10/100 MBit User-friendly input via eluCam 3D visualization Rapid positioning of the machining unit (up to 60 m/min) on the X-axis thanks to robust and low-wear direct drive. High-resolution absolute encoders eliminate the need for axis referencing. Technical Data: X-axis travel: 3800 mm Max. travel speed: 60 m/min Y-axis travel: 350 mm Max. travel speed: 30 m/min Z-axis travel: 280 mm Max. travel speed: 30 m/min Max. machining length with end machining left and right: 3700 mm Positioning accuracy: +/- 0.1 mm Milling spindle speed: 1 – 24,000 rpm Milling spindle output: 7.0 kW S1 with spindle return Tool magazine for 6 tools (5 standard positions, 1 position for rotary angle head) Tool holder: HSK F63 Included Accessories: Automatic tool changer with 6 tool positions (without tools) Safety fences left and right Light barrier at the front 4 horizontal pneumatic material clamping devices Automatic clamp positioning 1 foldable material stop Central chip extraction with chip box Dosing spray device Ljdpsw Dzagefx Adwehb Milling spindle with integrated rotation unit for angle head Rotary angle head – 122 20 56 37 HSK-F63 for 2 tools UPS (uninterruptible power supply) Important: The profile machining center is factory-equipped with a front light barrier system as standard. Lateral protection is provided by safety fences. Any necessary rear protection must be provided on-site or ask us for a quote for safety fences. Includes: Length measurement for profile bar Additional automatic tool changer Various used tool holders and milling cutters

Year of construction: 2010, condition: ready for operation (used), Profile length: 500-7500mm, max. rotational speed: 22.000/min, the machine should be overhauled. Lhodpjpaiiyefx Adweb

Condition: refurbished (used), Year of construction: 2000, functionality: fully functional, cutting length (max.): 6,000 mm, - technically efficient, ready to work - after full service - cutting length: 6000 mm - discs: 550 mm - E255 control - digital angle indicator Lhjdpfx Aex Aqhzedwjb - pneumatic angle adjustment 45-90 degrees - cutting according to external dimensions, without correction - cooling installation

Condition: used, Year of construction: 2009, overall weight: 500 kg, compressed air connection: 7 bar, Pressing height 140 mm Pressing force 70 kN (7 t) Pneumatic drive Power supply 230 V, 1~, 50/60 Hz Lhjdsx R R Rnspfx Adwsb Compressed air supply 7 bar Air consumption per working cycle 35 l Length 1,100 mm, depth 950 mm, height 1,230 mm, weight 545 kg

Condition: used, Year of construction: 1994, Cutting length scale up to 5000 mm, saw blade 420 mm, roller conveyor 1500 mm, electro-motorized movement of the right unit, digital measurement display, saw units swiveling and tiltable. Storage location: customer Lodpfxjw Sadrj Adwjhb

Condition: ready for operation (used), Year of construction: 2013, This Elumatec DG 244 was manufactured in 2013. It features a 4.5m double mitre saw, pneumatic clamping device, dust extraction, and a profile lifting bar set. Suitable for both stationary and mobile units, it also includes a cycling device and front light curtain. Contact us for more information. • Working length: 4.5 m Additional equipment Lhedpfxeycuqus Adwob • Short Stop • Pneumatic Clamping Device • Dust Extraction • Profile Lifting Bar Set for stationary and mobile units • Cycling Device • Front Light Curtain

Condition: used, Year of construction: 2007, Technical data: Speed: 2800 1/min Saw blade: ø 380 mm Motor power: 3000 W Lhjdpfx Aerwlwvjdwjb Roller conveyor, approx.: 128 mm Weight, approx.: 200 kg Dimensions (WxDxH), approx.: 1760 x 800 x 1680 mm

Year of construction: 2002, condition: used, Max. profile width at 180°: 220 mm Max. Profilhöhe: 210 mm Lhjdpoyab D Nsfx Adwob Adjustment range of angle: 30°-180° Welding mirror: 340 x 300 mm

Year of construction: 2002, condition: used, Max. cutting length: 3000 mm Max. saw blade diameter: 380 mm Cutting area at 90°: 195 x 120 mm Cutting area at 45°: 135 x 120 mm Minimum quantity spray device Pneumatic material clamps Miter cuts possible on both sides 2-Hand-Bedienung Lhedpfx Adeyabzuswob

Condition: used, Year of construction: 2010, functionality: fully functional, machine/vehicle number: 7500099112 / 8500099112, number of previous owners: 2, pressure: 7 bar, type of input current: DC, We are offering this used elumatec VS 750 / EV 850 multi-head welding machine / CNC corner cleaning machine, year of manufacture 2010. Lhsdpjx S Igcjfx Adwsb Manufacturer: elumatec Model: VS 750 / EV 850 Year: 2010 Condition: used Four-head welding machine Elumatec VS 750, 3.0 m x 3.1 m (maximum welding size) Weld bead limitation: 0.2 - 2.0 mm Industrial PC, Windows-based control, network-capable Conveyor direction: right to left Transport conveyor Elumatec, year 2010 CNC corner cleaning machine ELUMATEC EV 850 with turning station, automatic profile detection, Windows control system, additional milling unit Machines are sold as inspected, without warranty or guarantee Contact us via WhatsApp to receive information and videos of the machine. +38349563928 If you have any questions or require further information, please feel free to send us a message or call us.

Condition: excellent (used), shipping EU ~300euro Lodpol Skk Uefx Adwshb

Condition: used, Copy milling machine, copy milling machine, hand lever milling machine, hand lever milling machine, single spindle copy milling machine -Manufacturer: Elu, copy milling machine type AS 70 -Travel path: manual X//Y 230/80 mm -Stop depths: see photos -Workpiece clamping: pneumatic -Coolant device -Dimensions: 600/520/H1280 mm -Weight: 111 kg with pallet Ljdsp Swvkjpfx Adwjhb

Condition: used, Year of construction: 1997, Copy milling machine, copy milling machine, hand lever milling machine, hand lever milling machine, single spindle copy milling machine -Manufacturer: elumatec, 1-SPINDLE COPY MILLING MACHINE Type AS 70/44 -Spindle speed: 12000 rpm -Stop depths: see photos -Workpiece clamping: pneumatic Lsdpfx Astvhr Sjdwshb -Dimensions: Milling machine 580/500/H1510 mm roller blocks 1050/210/H900 mm -Weight: 149 kg with pallet