Used Emcomat 7 Technical Data for sale (60,001)

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, Emcomat 17D, lead screw and pull spindle lathe, manufactured in 2013, from a vocational training workshop, CE compliant, in excellent condition!!! Technical data: >> Year of manufacture: 2013, Machine no. D4D 130601 >> Center height: 170 mm >> Swing over bed: 340 mm >> Swing over cross slide: 190 mm >> Turning length: 700 mm >> Spindle speed: 4 speed stages from 40-3000 RPM, infinitely variable >> Quill stroke: 120 mm >> Tailstock: MK3 >> Spindle bore: 50 mm >> 20 longitudinal feeds: 0.045 / 0.787 mm/rev >> 20 cross feeds: 0.023 / 0.406 mm/rev >> Footprint / Dimensions approx.: Length 1,600 x Depth 0.9 x Height 1.3 meters >> Weight approx.: 750 kg Accessories and equipment: >> 3-axis position indicator >> 1 three-jaw chuck with 200 mm diameter and 1 set of jaws from Röhm Nwsdpfx Aie Afxm Ueron >> 1 four-jaw chuck with 200 mm diameter and 1 set of jaws from Röhm >> 1 quick-change tool holder without collets >> Steel tool rest with 2 pockets >> Chip guard >> Coolant system >> Bed stop About the machine: Offered for sale is an Emcomat 17D, lead screw and pull spindle lathe, manufactured in 2013, in well-maintained condition. The machine is fully functional, of course. All slides run very smoothly and evenly. The bed guides are in very good condition. Take advantage of the opportunity to inspect this machine on-site while it is powered on and to convince yourself of its condition.

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, A very well-maintained machine, originally used for vocational training, with a digital display and good accessories. The machine is connected. Njds Aa Ic Uopfx Airewn

Condition: repair required (used), Year of construction: 1997, functionality: limited functionality, machine/vehicle number: 3601, center height: 170 mm, center width: 700 mm, overall weight: 755 kg, The machine is functional, but has a minor transmission defect, which is noticeable through unusual noises. Therefore, the machine is being offered for sale as requiring repair! Nwsdpfs Aazk Sox Airon

Condition: used, Year of construction: 1993, Technical details: height of printing: - height of printing: - connection electric: 100-240 V pneumatically operated: min./max.: 4,8/6,9 bar The printer is a lower case inkjet printer for contactless mark products. Application: for commercial marking and labeling purposes. The device can print on any surface, any structure, any profile and on any form. (according to the manufacturer) Equipped with two control units. other features: - dimension height: 3.3 - 8.6mm and 1/8 "- 1/3"; Points of reference: 62 digits; - operation is via control unit - equipment with control unit 170i and accessories Control unit 178i dimensions: - machine: L: 600 x W: 650 x H: 1800mm - control units: L: 203 x W: 508 x H: 610mm Sale as is. Without test run! i.D. Nwsdpfju Nu Tpjx Airsn *

Condition: like new (used), Year of construction: 2008, functionality: fully functional, turning diameter: 340 mm, turning diameter over bed slide: 340 mm, center height: 170 mm, turning length: 650 mm, total length: 1,750 mm, total width: 900 mm, total height: 1,600 mm, spindle speed (max.): 3,000 rpm, rotational speed (max.): 3,000 rpm, type of input current: three-phase, Equipment: rotational speed infinitely variable, The machine is as good as new, comes from educational use, and is equipped with a complete collet system. Nwjdpjywfrtofx Airen

Condition: like new (used), Year of construction: 2014, operating hours: 58 h, functionality: fully functional, load capacity: 7 kg, arm reach: 800 mm, controller manufacturer: kuka, controller model: C4 Sunrise, teach pendant manufacturer: kuka, input voltage: 220 V, ROBOT ARM MANUFACTURER: KUKA Nedpfo Ad Na Ajx Airswn MACHINE TYPE: LBR iiwa 7 R800 MODEL YEAR: 2014 TECHNICAL SPECIFICATIONS PAYLOAD: 7 KG MAX. REACH: 800 MM CONTROLLER: KRC4 SUNRISE Operating Time (h): 58

Condition: like new (used), Year of construction: 2021, operating hours: 57 h, functionality: fully functional, machine/vehicle number: V002117/16, overall weight: 450 kg, power: 7.5 kW (10.20 HP), fuel type: electric, volume flow: 66 m³/h, operating pressure: 10 bar, pressure (min.): 0.5 bar, pressure (max.): 10 bar, type of cooling: air, Equipment: documentation/manual, refrigerant dryer, Hertz HBD 7 screw compressor, 7.5 kW – 10 bar – 57 operating hours – including refrigerated dryer Description: Hertz HBD 7 screw compressor – in like-new condition – only 57 operating hours. For sale is a Hertz HBD 7 screw compressor system from 12/2021 with only 57 operating hours. Nsdpfxjzt Srie Airewn The system has been operated very little and is in very good, like-new condition, both visually and technically. Technical data of the compressor: * Manufacturer: Hertz Kompressoren * Model: HBD 7 * Year of manufacture: 12/2021 * Operating hours: only 57 hours * Power: 7.5 kW * Max. pressure: 10 bar * Volume flow: 1.1 m³/min * Voltage: 400 V / 3 phases * Frequency: 50 Hz * Screw compressor, oil-cooled * Serial number: see nameplate Refrigerated dryer: * Model: Dryair DK 40 * Year of manufacture: 12/2021 * Max. pressure: 16 bar * Power: 0.37 kW * 230 V / 50 Hz * Refrigerant: R134a The system is mounted on a compressed air tank and is ready for immediate use as a complete unit. The photos show the actual system being offered. Price: €6,900 net, negotiable plus statutory VAT. Inspection and test run possible by arrangement. Collection preferred. Loading can be arranged by agreement.

Condition: used, Designation: Vibration Test System Manufacturer: Data Physics Model: LE-1216-3VH Force Rating: Sine (5 - 2000 Hz) Random (20 - 2000 Hz) 12000 lbf (53.4 kN) vector 12000 lbf (53.4 kN) rms Frequency Range Full Force Reduced Force Level 5 to 3000 Hz 2500 to 3000 Hz Maximum Displacement (Peak-Peak): Rated Stroke Limit Shock/Bump Continuous or Random Electrical Overtravel Limit Between Mechanical Stops 3.0 in (76 mm) 2.5 in (63.5 mm) 3.1 in (79 mm) 3.2 in (81 mm) Maximum Velocity 71 in/s (1.8 m/s) Nodpfsy Rqiwox Airewn Maximum Acceleration Sine 100 g vector, 5 to 2500 Hz Random 50 g rms, 20 to 2000 Hz Fundamental Resonance Frequency (Bare Table) 2050 Hz (nom.) Body Suspension Natural Frequency — Thrust Axis: - Vertical: 2 Hz - Horizontal: Below 2 Hz Blower Power (Full Load): 20 Hp, 20 kW; 230/460 V, 3-phase, 60 Hz Alternate Power: 20 Hp, 20 kW; 208/400 V, 3-phase, 50 Hz Air Pressure: Air Spring: - Vertical: 90-100 psig (621-690 kPa) - Horizontal: 2-5 psig (14-34 kPa) Field Specifications: - Rated Current (dc): 64 A - Maximum Voltage (dc): 240 V - Field Resistance at 20°C: 3.2 ohm Stray Flux Density with degauss coil: < 14 gauss at 12 in (304 mm) above table Field Protection: - Rated degauss coil current: 2.6 A (Nominal) - Maximum degauss coil voltage: 120 V Weight: 1216-3VH: 8000 lbs (3636 kg) Power Amplifier Model: DSA10-80 Item condition: Used item as shown in pictures Armature newly rewound Slip table / 40 mm grid M8 760 x 760 Armature bolt circles 8" / 16" M10 Please contact us if you have any questions. Shipping: The quoted shipping costs apply to deliveries within Germany. Worldwide shipping (please inquire for shipping costs outside of Germany). Sale only to commercial customers, without warranty or guarantee. Deviations from technical data and errors in the description of the items may occur and are subject to change.

Condition: used, G.i.N. Type: GL5350 GL5350-8H-1R3L G.i.N. Intelligent Data Logger GL5350 Nsdezg Tzropfx Airewn Performance Meets Intelligence Future vehicle generations will be increasingly equipped with intelligent driver assistance systems, complex multimedia components, and systems for autonomous driving. These complex, networked technologies generate ever-larger volumes of data, making troubleshooting during the development phase more complex and time-consuming. To shorten test drives, reduce their number, and still meet the testing requirements of all departments, the advantages of an intelligent and powerful data logger, such as the GL5300 series, come into play. The GL5300 series covers the time-synchronized recording of LIN/CAN & CAN FD bus systems, FlexRay networks, and Ethernet networks (TCP/UDP/DLT/ADB and Ethernet raw logging). This series also offers the connection of up to 8 cameras and up to 5 GLX504 units for an additional 20 CAN FD channels with SIC transceivers, as well as up to 3 GL5450 units for the synchronous recording of up to 60 100-Base-T1 lines (30 taps) and up to 18 1000-Base-T1 lines (9 taps). Residual bus simulation Classification unit Gateway CCP/XCP on CAN, XCP on CAN FD, XCP on FlexRay, XCP on Ethernet Sending of any, freely configurable messages Selective recording (extensive trigger and filter conditions) Data transfer via LAN/WLAN, USB and mobile network Operation via menu control Technical Data: GL5300 Configuration GL5350-8H-1R3L CAN Interfaces CAN 2.0 16 CAN FD 4 LIN Interfaces 5 RS-232 Interfaces 7 Analog Inputs 10 Bit 4 Operating Voltage +7 V … +50 V Power Consumption at 12 V: typ. 10.3 W Current Consumption at 12 V: in Sleep Mode < 2 mA in Half-Sleep Mode typ. 180 mA in Operation typ. 860 mA Operating Temperature Range -40 °C... +70 °C Housing: Material Side Profiles: Al Mg3 Cover: EN AW-6060 (AlMgSiO,5) T66 Decorative Strip: ABS Dimensions (LxWxH) 212x 290 x 80 Weight ~ 3500g Condition: used Scope of Delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have on the phone.

Condition: excellent (used), Year of construction: 1995, functionality: fully functional, Emcomat Emco EM20D Lead and Feed Lathe, built in 1995, in excellent condition, CE compliant! Technical specifications: >> Year of manufacture: 1995 >> Center height 200 mm >> Swing over bed 400 mm >> Swing over cross slide 250 mm >> Turning length: 1000 mm >> Spindle speed: 4 speed levels, continuously variable from 35-3000 rpm >> Quill stroke 120 mm >> Tailstock: MT3 >> Spindle bore: 50 mm >> 20 longitudinal feeds 0.045 / 0.787 mm/rev >> 20 cross feeds 0.023 / 0.406 mm/rev >> Space requirements / installation dimensions approx. length 1.900 x depth 0.9 x height 1.3 meters >> Weight approx. 850 kg Accessories and equipment: >> 3-axis position indicator >> 1 piece Three-jaw chuck with 1 set of jaws >> Tool holder with 3 pockets >> Chip return wall >> Coolant system Nsdswag Stjpfx Airewn >> Bed stop About the machine: Offered is an Emcomat 20D centerline and feed spindle lathe, built in 1995, in lightly used condition. The machine is fully functional. All slides run very smoothly and evenly. The bed guides are in very good condition. Take advantage of the opportunity to view this machine on-site under power and see for yourself its condition.

Condition: good (used), Year of construction: 2006, EMCO EMCOMAT 14 D Lathe EMCO EMCOMAT 14 D with Emco digital display, year of manufacture 2006, in excellent original condition. The machine comes from the special production department of a renowned German mechanical engineering company. CE compliant!! Technical specifications: Year of manufacture: 2006 Model: EMCO EMCOMAT 14 D Technical Data Working area Travel in X/Y/Z: 135 / - / 590 mm Centre distance: 650 mm Centre height: 140 mm Main spindle Max. speed: 4000 rpm Spindle mount: Size 4 (DIN 55029) Max. drive power: 7.5 kW Tailstock Quill diameter: 30 mm Internal taper: MT 2 Quill stroke: 80 mm Dimensions Nodoxyvaqopfx Airewn Dimensions (LxWxH): 1280 x 730 x 1480 mm Machine weight: 420 kg About the machine: The EMCOMAT 14D is the smallest machine in the EMCOMAT series. The EMCOMAT 14D is a lathe for the highest demands: with stepless speed control, constant cutting speed and an impressive 7.5 kW drive power (40% duty cycle). This compact machine with outstanding performance is ideal wherever maximum precision is required in limited spaces, such as in optical, electrical, and automotive workshops, laboratories, and even Formula 1. Offered here is an EMCO EMCOMAT 14 D lathe with Emco digital display, year of manufacture 2006. This lathe is in excellent original condition and comes from a facility where it was only used occasionally for special applications. The control system is very user-friendly. The guideways are lubricated regularly by a central lubrication system. The EMCO EMCOMAT 14 D has been mechanically and electrically tested by us. Take the opportunity to view and test the EMCO EMCOMAT 14 D under power at our premises. You will find more lathes from renowned manufacturers on our website.

Condition: like new (used), Kunzmann WF 7/3 Tool milling machine Kunzmann WF7/3 with Heidenhain TNC 124 control, manufactured in 1997, in good CONDITION. CE compliant!! The machine comes from the vocational school of the HWK Augsburg and, according to the master craftsman, has approximately 300 operating hours. Technical data: Year of manufacture: 1997 Fixed angular table Clamping slots: 6 Njdpfx Aezy Uh Tsirewn Slot width: 14 H 7 Slot spacing: 63 mm Maximum load: 300 kg Spindle speeds S I: 1 – 1125 min-1 Spindle speeds S II: 1126 – 4500 min-1 Feed rate (potentiometer 100%): longitudinal and transverse 0 – 2000 mm/min. Rapid traverse: longitudinal and transverse 5000 mm/min. Feed rate: vertical 0 – 2000 mm/min. Rapid traverse: vertical 4000 mm/min. Travel distances X/Y/Z: 600/400/400 mm Vertical and horizontal quill - SK40 Hydraulic clamping system Weight: approx. 2000 kg Dimensions: approx. 2 x 2 x 2 m Main drive motor: 7.5 kW Accessories and equipment: Heidenhain TNC 124 control Hydraulic chuck, vertical and horizontal Automatic central lubrication Spindle brake Technical documentation, spare parts diagrams, operating manual for the control unit and programming examples Handwheels Coolant system About the machine: Offered is a tool milling machine Kunzmann WF7/3 with a Heidenhain TNC 124 control. This universal milling machine is in very good original condition. It comes from a company where it was only used for training purposes. It has a very easy-to-use control system. Furthermore, the machine has hydraulic clamping both vertically and horizontally. Switching from vertical to horizontal is very easy by folding down the vertical head. The guides are regularly lubricated by the central lubrication system. The Kunzmann has been mechanically and electrically inspected by us. Take advantage of the opportunity to inspect and test the Kunzmann on-site under power. You can find more milling machines from well-known manufacturers on our website.

Condition: like new (used), functionality: unexamined, Industrial Air-Cooled Mining Infrastructure – Available as a Package or Individually An opportunity to acquire 8 used steel data-center containers designed for high-density computing and cryptocurrency / Bitcoin mining applications. The units have previously been configured for mining computers and provide a ready-made physical infrastructure that can potentially be recommissioned for cryptocurrency mining, high-density computing, or other suitable data-processing applications. EQUIPMENT Quantity: 8 containers Type: Data center / cryptocurrency mining containers Reference: Digital Shovel Mini-Pod M300 8 Datacenter container Construction: Steel Cooling: High-volume air cooling Approximate dimensions per unit: • Width: 2.24 m • Main container depth: 2.44 m • Filter section: approximately 1.20 m additional depth • Height: 2.56 m COOLING & INFRASTRUCTURE The containers are designed around a straightforward high-volume air-cooling system. Cooling air is drawn through large filtration sections and exhausted to the outside with large fans. The mining computers themselves have are not included in the package. However, electrical wiring and connectors for connecting computing equipment are in the containers. This gives a buyer an existing infrastructure platform that can be adapted according to the requirements of the intended installation. CONDITION 7 containers are substantially complete. The containers are generally externally tidy, with some minor rust visible around the forklift lifting areas. Some doors between containers are missing as a result of the configuration of the previous installation. During the appraisal inspection, the fan blades were manually checked and found to rotate freely. Nwedsz Dxcmepfx Airon 1 container is incomplete and is missing its fans and front grille assembly. One container door is also reported as damaged. Please note that no electrical testing of the wiring or fan motors was performed as part of the appraisal, so buyers should carry out their own technical inspection and testing before commissioning the equipment. IMPORTANT INFORMATION These are used units and are offered in their present condition. The appraisal states that production of these particular mining containers has ended. It also reports that Digital Shovel advised that the containers were assembled outside its own factory and that the manufacturer's normal warranty is therefore only available on a limited basis. Prospective purchasers are encouraged to inspect the equipment and independently verify its electrical, mechanical and operational condition before purchase.

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, travel distance X-axis: 2,134 mm, travel distance Y-axis: 813 mm, travel distance Z-axis: 762 mm, total length: 5,500 mm, total width: 2,700 mm, table width: 711 mm, table length: 2,134 mm, overall weight: 11,650 kg, spindle speed (max.): 8,100 rpm, number of slots in tool magazine: 31, Equipment: chip conveyor, documentation/manual, CNC Milling Machine HAAS VF-7/40 TECHNICAL DATA: - Date of manufacture September 2014 - X 2 134 mm - Y 813 mm - Z 762 mm - Control HAAS - Spindle speed max. 8 100 rpm - Table size 2 134 x 711 mm - Spindle nose to table 102 – 864 mm - Tool magazine 31 positions (SK40) - Spindle power 22.4 kW - Chip conveyor - Machine dimensions 5.5 x 2.7 x 3.3 m - Weight approx. 11 650 kg Machine in very good technical condition, connected to power – it can be inspected and tested on site by prior appointment. Professional loading is included in the price. Accessories, tooling and clamping devices shown in the photos are part of the offer only if listed under equipment. Nsdpfs Adzgzjx Airswn Technical data is for reference only and may contain inaccuracies. Subject to prior sale.

Condition: used, This listing is for the Agilent 34970a Data Loger Switch Unit The unit is in full working condition and is ready for immediate use Key Features: 3-slot mainframe: Supports up to 60 2-wire channels using plug-in modules. Built-in 6½-digit DMM (Digital Multimeter): Measures voltage, current, resistance, frequency, and temperature. Plug-in Modules Available: e.g. 34901A (20-channel multiplexer), 34902A (16-channel actuator), 34908A (40-channel single-ended multiplexer), etc. Interfaces: GPIB and RS-232 standard (USB via adapter). Logging Capabilities: Can log data over time for test/monitoring applications. Scan Rates: Up to 250 channels/sec depending on configuration. User Interface: Front-panel controls with LCD display. Nedpexhfcdofx Airown Remote control via SCPI commands. Typical Applications: Environmental monitoring (temperature, humidity) Functional test systems Data logging in labs Automotive and aerospace test setups Industrial process monitoring

Condition: used, German RepRap (innovatiq) Type: German RepRap X500 RepRap 3D printer Technical data: Material: Composite materials (carbon fiber, glass, Kevlar) Technology: Fused deposition modeling (FDM/FFF) Dimensions: 1120 × 850 × 955 mm Weight: 185 kg Nedpfxozg Tz Ee Airewn Nozzle diameter: 0.4 Ø mm Printing speed: 10 - 150 mm/s XY precision: +/- 0.05 mm Max. volume: 500 × 400 × 450 mm Power: 230 V AC 50Hz 10 A 2.3 kW Additional features: Touchscreen Condition: used Scope of delivery: (See pictures) + Filament spools (PETG) and printing accessories Only PC (WIN 7) available! Screen and input devices not included! A license for the current software required to operate the printer must be purchased by the customer (approx. 200 euros for Simplify3D)! (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have over the phone.

Condition: excellent (used), Catalog number 6368 Nwsdpfxoztzgij Airon TECHNICAL DATA - max. width of workpiece 230mm - max. height of workpiece 130mm 7 spindles: 1) horizontal, lower 230mm, 5.5kW 2) vertical, right 130mm, 5.5kW 3) vertical, left 130mm, 5.5kW 4) horizontal, upper 230mm, 7.5kW 5) horizontal, upper 230mm, 11kW 6) horizontal, lower 230mm, 18.5kW 7) universal 230mm, adjustable at 360 degrees, 5.5kW - all spindles adjustable up/down, left/right - all spindles equipped with an electric brake - spindle diameter 40mm - spindles 4 and 5 adjustable electrically up/down - from above, 8 feed rollers, metal, twisting, including 2 double rollers - from above, 4 feed rollers, rubber - from above, 2 pressure rollers - from below, pawls - from below, on the side, 3 pressure rollers - from below, 2 metal rollers, smooth, feed rollers - from below, 2 double rollers, feed rollers, rubber - rollers pneumatically pressed - feed mechanism on cardan shafts - stepless feed speed adjustment 5-36m/min - feed motor 4kW - electric adjustment of planing thickness 0.75kW - length of infeed table 1980mm - enclosed in a cabinet - central lubrication of the table - dust extraction nozzle diameters 5x120mm, 2x150mm - dimensions (L/W/H) 5500x1840x1900mm - weight approximately 5000kg ADVANTAGES – Italian made – with 7 heads – for wet and dry wood – last spindle is universal – unpainted – used planer, very good condition Net price: 116900 PLN Net price: 27190 EUR, depending on the exchange rate of 4.30 EUR (Prices may vary depending on exchange rate fluctuations)

Condition: excellent (used), CATALOGUE NUMBER: 6575 TECHNICAL DATA - max. width of workpiece: 230mm - max. height of workpiece: 170mm - 7 spindles: 1) horizontal lower 230mm, 11kW 2) vertical right 170mm 3) vertical left 170mm (2 and 3 spindles), 11kW 4) horizontal right 170mm, 5.5kW 5) horizontal upper 230mm, 11kW 6) horizontal lower 230mm, 7.5kW 7) universal 230mm, adjustable by 360°, 7.5kW - all spindles adjustable up/down, right/left - spindles 3 and 5 are electrically adjustable - ATS (Automatic Thickness Setting) - spindle diameter: 40mm - electric brakes - top: 4 feed rollers, toothed, including 1 double roller - top: rubber double feed roller - top: feed roller, rubber, double - bottom: 2 metal feed rollers, smooth - bottom: feed roller, rubber, double - feed on cardan shafts - rollers are pneumatically pressed - stepless feed speed adjustment: 6-24m/min Nwjdpfxsztzfle Airsn - feed motor: 5.5kW - electric adjustment of cutting depth - body lifting motor: 0.55kW - central lubrication of the table - diameter of extraction nozzles: 7x140mm - dimensions (L/W/H): 5800x2050x1850mm - weight approximately: 4500kg ADVANTAGES - German production, WEINIG brand - with 7 heads - universal spindle - with ATS - for wet and dry wood - used planer, very good condition Net price: 126900 PLN Net price: 29520 EUR Net price calculated according to the exchange rate of 4.30 PLN/EUR (in case of larger exchange rate fluctuations, the price may change)

Condition: excellent (used), 574 USED FRITSCH 7/650 E NU automatic dough sheeter, flattener. EXTERNAL DIMENSIONS (in cm): - W: 420 - L: 120 - H: 140 - right arm length 190 - left arm length 182 - belt width 64 TECHNICAL DATA: - power supply: 3x380V 50Hz - power: 1.8 kW Nwodpfx Aiez Ihr Sjren The price is a net price. Paid options available: transport. Our languages: ENGLISH, FRENCH, GERMAN, RUSSIAN, UKRAINIAN.

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, machine/vehicle number: 151255, measuring range X-axis: 750 mm, measuring range Y-axis: 500 mm, measuring range Z-axis: 500 mm, workpiece weight (max.): 250 kg, total height: 3,020 mm, type of input current: AC, total width: 2,092 mm, total length: 2,140 mm, overall weight: 4,500 kg, table width: 900 mm, table height: 860 mm, table length: 1,300 mm, travel speed (max.): 520 mm/min, table load: 250 kg, ambient temperature (max.): 40 °C, ambient temperature (min.): 15 °C, maximum load weight: 250 kg, Equipment: type plate available, For sale is a used ZEISS GageMax 7/5/5 Navigator 3D coordinate measuring machine with serial number 156521 and manufactured in 2011. The machine has a measuring range of 750 × 500 × 500 mm and is designed for workpieces up to 250 kg. It is equipped with a ZEISS VAST XT probe system. The measuring volume also includes a multi-probe changer with various probe holders. According to the original auction description, the offered lot includes accessories and computer equipment. The available images show, among other things, a computer, monitor, keyboard, mouse, and other components belonging to the machine. The scope of delivery is based on the images or the components available during inspection. Technical data: Manufacturer: ZEISS Model: GageMax 7/5/5 Navigator Serial number: 156521 Year of manufacture: 2011 Measuring range X/Y/Z: 750 × 500 × 500 mm Maximum workpiece weight: 250 kg Probe system: ZEISS VAST XT Multi-probe changer included Nedpoz Ebzbsfx Airown Computer equipment included Last documented calibration: 02/2025 The machine is in used condition. A current functional test was carried out by ZEISS. An on-site inspection is possible by arrangement and is expressly welcome. The machine is preferably sold for collection. Loading and transport can be arranged by agreement. Scope of delivery as shown in the images. Subject to prior sale.

Condition: excellent (used), 1 used, very well-maintained horizontal boring and milling machine / table drilling machine with point-to-point and contour control HEIDENHAIN TNC 145 and facing head Manufacturer: WMW UNION, Origin Germany Model: BFT 130/7-TNC 145 Year of manufacture: 1984 Technical data: Spindle diameter: 130 mm Spindle shank: SK 50 Table surface: 2000 x 1800 mm Travel: X-axis, transverse 2785 mm Y-axis, vertical 2520 mm Z-axis, longitudinal 2345 mm W-axis, quill 900 mm B-axis, table 360° Table load: 8000 kg Speed range: 5-1000 rpm Njdpfx Aiez Euuzerewn Facing head speed: 5-2500 rpm Feed force X/Y/Z: 20000/20000/25000 N Feed rate X/Y/Z: 5-2500/5-2500/2-2500 mm/min Rapid traverse X/Y/Z: 5/5/3.15 m/min Total connected power: 100 kVA Total power consumption: 70 kW Footprint L x W x H: approx. 8.40 x 5.9 x 5.5 m Weight: 35,300 kg Accessories / Special features: • Point-to-point and contour control HEIDENHAIN TNC 145 • Spindle Ø 130 mm with SK 50 with motorized tool clamping • Facing head • Feed and rapid traverse • Lateral table supports R + L with hardened guides • Coolant system • Guide rail telescope covers • Swiveling control panel • Separate control cabinet and hydraulic unit TOP condition! Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany

Condition: used, For inquiries regarding the vibratory plate, please contact Mr. Herden by phone. WEBER CR 7 Hatz Diesel Vibratory Plate / New machine / In stock & immediately available Nodpfx Ajym I Hkjirjwn Sales price: €8,690.00 net / €10,341.10 gross 3-year warranty Shipping available. The reversible soil compactors of the CR series impress with their powerful compaction performance and maximum efficiency. They are the first choice for compaction tasks in classic road and civil engineering as well as paving construction. Smooth running characteristics, high operational smoothness, and low hand-arm vibrations ensure a high level of operator comfort. CR 7 – Performance and Comfort Perfected: - Infinitely variable forward and reverse travel. - Hydraulic switching of throttle control, hydraulic switching safely routed within the guide bar - Low hand-arm vibrations - Fatigue-free operation thanks to the height-adjustable guide handle - Protection of machine and engine through protective frame and full engine enclosure - Reduced maintenance due to self-tensioning centrifugal clutch - Easy servicing as all maintenance elements are easily accessible - Safe and fast loading thanks to large, foldable lifting eye - Secure lashing for transport with additional loops on the engine console - Increased operating comfort with electric start and hour meter - Areas of application: road and civil engineering, trench construction, landscaping, sub-base for paved areas, vibrating in pavers, and compaction of sand, gravel, or crushed stone. Technical Data Engine: Hatz Diesel Max. engine output: 7.5 kW (10.3 hp) Weight: 475 kg Centrifugal force: 65 kN Frequency: 74 Hz Working width: 65 cm Financing options available on request. We are an official sales and service partner for Westtech, Gierking GMT, OilQuick, Weber MT, Holp, DMS, Seppi M., Magni telehandlers, JCB construction machinery, Mercedes-Benz, and Iveco. Additionally, with a stock of 800 used vehicles, we are one of the largest commercial vehicle dealers in Germany. We supply the complete Weber MT range! Errors and prior sale excepted. = More Information = New: Yes Engine manufacturer: Hatz Please contact Marius Herden for further information.

Condition: used, functionality: fully functional, For sale: an industrial Nilfisk ALTO SOLAR BOOSTER 7-58E18H high-pressure washer with electric water heating, 18 kW. This stationary unit is designed for cleaning machines, equipment, floors, and industrial fixtures. Technical specifications according to the nameplate: Nodo Ad Nkbepfx Airewn Manufacturer: Nilfisk ALTO Model: SOLAR BOOSTER 7-58E18H Product number: 107370270 Serial number: 3520122200419 Working pressure: 170 bar Maximum permissible pressure: 250 bar Flow rate: 18.5 l/min – 1110 l/h Maximum temperature (according to nameplate): 85°C Electric heating power: 18 kW Total rated power: 25.5 kW Power supply: 400 V, three-phase, 50 Hz Rated current: 39 A Protection rating: IPX5 Weight: 155 kg Country of manufacture: Hungary Equipment visible in the photos: High-pressure hose Nilfisk high-pressure gun Spray lance Pressure gauge Water temperature adjustment Control panel with START/STOP buttons and a main switch The unit has an additional marking on the housing: “MAXIMAL 70 Grad,” indicating a temperature limit of 70°C. The unit is used and shows visible signs of wear.

Condition: used, Year of construction: 2005, Technical details: max. turning diameter: 320 mm turning length: 1040 mm control: OSP E 100 L Dialog Fanuc greates pass round over bed: 530 mm standard turning dia.: 350 Max. distance between centres: 1200 mm max. workpiecediameter: 525 mm Traverse X-Axis 1: 500 Traverse X-Axis 2: 350 mm Traverse Y-Axis 1: 160 (+80/-80) mm Traverse Z-Axis 1: 1200 mm Traverse Z-Axis 2: 1200 mm Spindle 1 Power: 22 kW Nodpfsz Ig Swex Airjwn Spindle 1 RPM: 3800 1/min spindle nose: JIS A2-8 spindle bore: 80 mm bar material dia.: 65 mm C-Axis: 0,001° Number of Turrets: 2 Turret No.1 stations / rotary tools: 12/12 Turret 1 tool RPM: 4500 1/min Turret No.2 stations / rotary tools: 12/12 rapid traverse X-axis: 20 m/min rapid traverse Z-axis: 25 m/min total power requirement: 33 kVA weight of the machine ca.: 10 t dimensions of the machine ca.: 6,0 x 2,5x 2,3 m High pressure coolant system: INterlit 8/20 bar Accerories Chip conveyor part counter total counter tool setting Signal lamp 3 colors spindle load monitor B Spindle 1 Chuck SMW 300 mm CNC Turning-and Milling Center The Okuma LT 300 MY has 2 turrets, the upper turret has Y-axis with milling function, the lower turret has milling function. It has main- and subspindle. This allows synchronized machining using 2 turrets. There is an Interlit paperfilter/high pressuire system with the machine with coolant cooler. There are 7 identical machines available, all in very good and well maintained condition. *

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, DIESEL COMPRESSOR DIESEL DOOSAN 7/20, recently serviced!!! Compressor with documentation for registration in Poland. Technical specifications: Nsdpfx Asz Rvznoirown capacity: 2.00 m3/min; working pressure: 7 Bar; engine: KUBOTA operating hours: 295h!!! year: 2023 Compressor is in perfect working order, ready for operation, with warranty. net price: 27,500 PLN gross price: 33,825 PLN Below is a link to a video showing the machine in operation.