Used End Mill Machine for sale (67,280)

Condition: used, Year of construction: 1995, Universal CNC Milling Machine Manufacturer: HERMLE Model: UWF 902 S Year of manufacture: 1995 Operating hours: 65,071 Control system: HEIDENHAIN TNC 426 Working range X/Y/Z: 600 x 450 x 500 mm Spindle speed range: 20 - 6,300 rpm Tool holder: SK 40 M & H 3D probe (for workpiece measurement) Kodpfx Aov Rxa Sedwell Vertical-horizontal milling device Quill Coolant system Angle table: 900 x 458 mm Weight: 4,000 kg Machine dimensions LxWxH approx.: 3,900 x 2,000 x 2,000 mm ä21126

Condition: used, Year of construction: 1995, Universal CNC Milling Machine Manufacturer: HERMLE Model: UWF 902 H Year of manufacture: 1995 Operating hours: 46,680 Control: HEIDENHAIN TNC 426 Travel X/Y/Z: 600 x 450 x 500 mm Swivel table: 900 x 458 mm Renishaw 3D probe Speed range: 20 to 6,300 rpm Tool holder: SK 40 Kljdpfev Rpr Ssx Adwsl Coolant tank Drive power: 8.6 kW Weight approx.: 4,500 kg Machine dimensions LxWxH approx.: 2,950 x 2,200 x 2,300 mm

Condition: excellent (used), Year of construction: 1999, x-travel 400 mm y-travel 320 mm z-travel 400 mm Control HEIDENHAIN TNC 410 spindle turning speed - stepless 0 - 4000 U/min quill stroke 60 mm tool taper SK 40 table surface area 650 x 350 mm total power requirement 6,5 kW weight of the machine ca. 1,8 t dimensions of the machine ca. 2,5 x 1,8 x 2,0 m Electric handwheel HR 410 Probe MP 11, automatic tool measurement TT 120 Kjdpfx Adjunt Ihswsll Cabin, tool holders,...

Condition: excellent (used), Catalogue number 7757 TECHNICAL DATA Milling machine - Spindle diameter: 25mm - Spindle height: 120mm - Interchangeable spindle, tiltable 20 degrees - Spindle locking - Height adjustable (up/down) - Original guide fence - Table dimensions: 1120x750mm - 4 spindle speed settings - Motor: 3.8 kW Circular saw - Max blade diameter: 350mm - Spindle axis: 30mm - Blade adjustable (up/down and angle) - Spindle locking - Cutting width at fence: 540mm - Cast iron table - Dimensions (L/W/H): 1260x900x1000mm - Weight: 610kg ADVANTAGES – Made in Poland – DTR documentation available – Used milling machine, very good condition Net price: 6900 PLN Net price: 1640 EUR (based on exchange rate 4.2 EUR) Kljdpfx Adsx Tgtdewel (Prices may vary with exchange rate fluctuations)

Condition: used, Year of construction: 2010, x-travel 700 mm y-travel 420 mm z-travel 610 mm Ksdoxgiclepfx Adwjll Control Heidenhain iTNC 530 spindle tunring speed 30.000 U/min tool taper HSK E50 number of tool places 28 Pos. auto power on hours ca. 80.015 h spindle hours ca. 58.434 h In our opinion, the machine is in good used condition and can be inspected under power by appointment. Technical Features & Accessories: - 4+5 axes - Clamping device, Erowa Power Chuck ITS148 - Clamping device, Erowa UPC - Blum laser - Renishaw 3D probe - Extraction system Accessories, tools, and clamping devices shown are only included in the scope of delivery if noted in the additional information. Subject to changes and errors in the technical data and information, as well as subject to prior sale!

Condition: new, The RAX Tube End Finishing Machine from KNUTH is a motor-driven notcher designed for efficiently notching tubes made of steel and non-ferrous heavy metals. With its compact footprint, this versatile machine can accommodate various tube diameters ranging from 1/4" to 2", ensuring high productivity and low operational costs. The RAX operates with a powerful 1.5 kW main drive motor and is capable of cutting plate thicknesses of up to 3 mm, delivering clean cuts that require no rework. It's simple to use and can handle multiple tube sizes instantly, enhancing your workflow. You can easily operate this machine with standard 230 Volt connectivity. To learn more about how the RAX can benefit your tube processing, request a quote today. This robust notcher stands out in the Tube End Finishing Machines category, making it an essential addition to your Tube and Profile Processing solutions. Kodpfx Aswhkf Tedwoll

Condition: used, Year of construction: 2014, operating hours: 24,970 h, machine/vehicle number: 15175183974, Stock no.: 371400, travels X/Y/Z: 1,800x700x700 mm, max. workpiece weight: 1,500 kg, spindle speed: 20 - 8,000 rpm, tool holder: SK40, 60-position tool changer, machine weight: 13,250 kg, equipped with SIEMENS Sinumerik 840D sl control, electronic handwheel, chip conveyor, stock no.: 473100, hydraulic unit, with T-slot clamping table, approx. 210x70 cm, with integrated rotary table, zero-point clamping system, 4x NC vices HILMA NC 125, 1 GARANT Zeroclamp console Kljdpjyciunjfx Adwsl

Condition: used, Year of construction: 2012, feed length X-axis: 600 mm, feed length Y-axis: 400 mm, feed length Z-axis: 400 mm, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, feed rate X-axis: 2 m/min, feed rate Y-axis: 2 m/min, feed rate Z-axis: 2 m/min, quill stroke: 60 mm, rapid traverse X-axis: 5 m/min, rapid traverse Y-axis: 5 m/min, rapid traverse Z-axis: 4 m/min, rotational speed (max.): 4,500 rpm, table load: 250 kg, Equipment: documentation/manual, rotational speed infinitely variable, Used universal milling and drilling machine Kunzmann WF 600 MC Heidenhain TNC 320 control Travel X/Y/Z = 600/400/440 mm Infinitely variable spindle speed: 1-4500 rpm Spindle SK40 DIN 69871 (Form AD) with pull stud DIN 69872 Fixed angular table 800x425 mm, 6 x 14 H7 T-slots Coolant system, chip splash guard cabin with removable side panel, machine light, machine supports, electronic handwheel HEIDENHAIN HR 410, machine documentation, operating manual. Paint finish RAL 7035 / RAL 5010 gentian blue Kodpsya H Aksfx Adwjll Further technical data available on request. The machine is located at 71334 Waiblingen-Beinstein, is immediately available, and can be inspected by appointment. Please schedule your visit in advance.

Condition: used, Year of construction: 2007, feed length X-axis: 400 mm, feed length Y-axis: 350 mm, feed length Z-axis: 400 mm, travel distance X-axis: 400 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 400 mm, quill travel distance: 60 mm, table load: 250 kg, Equipment: documentation/manual, Used universal milling and drilling machine Kunzmann WF 4/3 Heidenhain Position Control TNC 124 Travel X/Y/Z = 400/350/400 mm Infinitely variable speed 1-4000 rpm Spindle SK40 DIN 69871 (Form AD) with drawbar according to DIN 69872 Horizontal and vertical spindle Fixed angle table 650 x 350 mm, 6 x 14 H7 T-slots Coolant system Klodpfjya Hrlex Adwsl Electronic handwheel HEIDENHAIN HR 410 HEIDENHAIN KW130 probe system with cable Chip splash guard cabin, hydraulic tool clamping, central lubrication. Machine folder with operating manual and control user manual included. Further technical data available upon request. The machine is located at our facility in 71334 Waiblingen-Beinstein, is immediately available, and can be inspected by appointment. Please contact us in advance to arrange a visit.

Condition: ready for operation (used), Year of construction: 1989, operating hours: 2,100 h, functionality: fully functional, workpiece weight (max.): 200 kg, thread length: 880 mm, feed length X-axis: 1,060 mm, feed length Y-axis: 500 mm, feed length Z-axis: 400 mm, feed rate X-axis: 1 m/min, feed rate Y-axis: 5 m/min, position of the milling head: Horizontal, swivelling, center height in crank: 250 mm, center height: 250 mm, type of input current: AC, power of feed motor: 1,500 W, milling spindle length: 200 mm, spindle bore: 90 mm, spindle speed (max.): 400 rpm, spindle speed (min.): 25 rpm, mandrel length: 200 mm, collet bore: 90 mm, clamping length: 880 mm, workpiece diameter (max.): 500 mm, Thread Milling and Gear Hobbing Machine MSZ 5A352ПФ The MSZ model 5A352ПФ is a universal thread milling and gear hobbing machine, designed for machining threads, worms, and spur gears by milling and hobbing processes. Manufactured in 1989, the machine is intended for industrial applications requiring reliable performance, versatility, and repeatable accuracy. The machine is suitable for workpieces with a maximum length of 1060 mm and a maximum diameter of 500 mm. The maximum thread length is 880 mm, and the machine supports gear cutting up to module 8, covering a wide range of thread and gear machining tasks. Helix and thread angles up to 30° can be machined, allowing flexible use in mechanical engineering and transmission manufacturing. The milling and hobbing spindle features a 90 mm spindle bore and supports cutting tools with a maximum hob diameter of 160 mm and a maximum hob length of 200 mm. The spindle operates in a speed range of 25 to 400 rpm, providing suitable cutting conditions for different materials and tool diameters. The main drive motor offers multiple power and speed stages (5 / 6.3 / 10 kW at 750 / 1000 / 1500 rpm). The machine is equipped with stepless longitudinal and radial feeds, with longitudinal feed rates from 2 to 100 mm/min and radial feed rates from 2 to 50 mm/min, enabling precise control during machining operations. A complete set of change gears allows accurate synchronization for thread milling and gear hobbing. With overall dimensions of approximately 3100 × 2270 × 2100 mm and a total weight of about 7890 kg, the 5A352ПФ features a rigid, heavy-duty construction that ensures excellent stability and vibration damping. The machine operates on three-phase AC power and is supplied with original factory documentation. Condition: *Used machine *Ready for operation *Fully functional *Operating hours: approx. 2,100 h Scope of delivery: *Complete set of change gears Klodjx Unpvepfx Adwel *Technical passport (Russian) *Operating manual (Russian) Typical applications: *Thread milling *Gear hobbing (spur gears, worms) *Machining of transmission components *General mechanical engineering *Repair and small- to medium-series production

Condition: used, Year of construction: 2003, x-travel 780 mm y-travel 560 mm z-travel 560 mm tool taper SK40 control HEIDENHAIN iTNC 530 weight of the machine ca. ca.12,5 t required space 3,40 x 3,30 x 2,60 m DECKEL MAHO DMC 60T BJ 2003 Operating hours: 32532.7 The machine DMC 60T (1659) is in very good condition and is ideally suited for precise milling operations thanks to powerful motor spindles, high feed rates, and a flexible tool magazine. All technical details can be found below. Working range Travel distance/ X-axis: 780mm Y-axis: 560mm Z-axis: 560mm Worktables NC rotary table – clamping surface, pallet: diameter 500 x 630 mm Centering bore: diameter 50^H6 20 deep mm Locating bore: diameter 20^H6 20 deep mm Torque of the table at: – 100% duty cycle: 1603Nm – 25% duty cycle: 2813Nm Max. rotation of the table: 30 rpm Feed: 7200 ./min. Permissible table load: 400 kg Tool magazine with magazine SK 40 Feed drive AC servo motors in digital technology for axis X, Y, Z Feed speed X-, Y-, Z-axis infinitely programmable: 20–15000 mm/min. Rapid traverse X-, Y-, Z-axis: 50 mm/min. Setup operation X-, Y-, Z-axis: 20–2000 mm/min Measuring system Resolution | X-, Y-, Z-axis: 0.001mm Input unit | X-, Y-, Z-axis: 0.001mm Position tolerance | X-, Y-, Z-axis: 0.010mm Working area Travel/ X-axis: 780mm Y-axis: 560mm Z-axis: 560mm Spindle main speed: 18000min^-1 Speed Kjdpfswm Rrwsx Adwsll Infinitely programmable: 20–24000 min^-1 In setup mode: 20–800 min^-1 Main drive 24000 min^-1: motor spindle without gearbox Speed Infinitely programmable: 20–24000 min^-1 In setup mode: 20–800 min^-1 Weight Machine with tool changer and transport base: approx. 10100kg Installation weight Machine with fixed table and tool changer: max. 11500kg Dimensions Machine: 3.40 x 3.30 x 2.60 m Chip conveyor: 2.77 x 1.00 x 2.07 m Band filter system 900l: 2.22 x 1.40 x 2.20 m

Condition: used, Year of construction: 2007, machine/vehicle number: 195125, Weight: 5,040 kg, MAZATROL Matrix control, chip conveyor, tool changer, max. tool length: 210 mm, ATTENTION: Collection of this item only by prior arrangement!!! Kodjyciryspfx Adwoll

Condition: good (used), Hello, For sale: Coordinate drilling machine and universal milling machine, type 6T83-1. Kljdpfx Adjxyi Stowsl The machine is fully operational and in continuous use; inspection and testing on site are possible. The price listed in the advertisement is net and is subject to VAT. The machine can be viewed in Starachowice, Kwiatkowskiego 13. Telephone contact available from 7:00 to 16:00.

Condition: good (used), Hello, For sale: Vertical milling machine FSS-400/1600. The machine is operational, in continuous use, and available for inspection. Kljdpfx Adjxyi U Iswjl The listed price is net; VAT must be added. The machine can be viewed in Starachowice at 13 Kwiatkowskiego Street. Telephone contact available from 7:00 to 16:00.

Condition: good (used), Hello, For sale: Vertical milling machine FSS-315x1250. The machine is fully operational and in continuous use, available for inspection. The price listed in the advertisement is net; VAT must be added. Klodexykarspfx Adwel The machine can be viewed in Starachowice at 13 Kwiatkowskiego Street. Phone contact available from 7:00 to 16:00.

Condition: good (used), Hello, Universal milling machine FY-321 for sale. The machine is fully operational and in continuous use, with the possibility to test on site. The price stated in the advert is net and is subject to VAT. The machine can be inspected in Starachowice, at 13 Kwiatkowskiego Street. Telephone contact available from 7:00 to 16:00. Klodpjxykbiofx Adwol

Condition: excellent (used), Year of construction: 1999, functionality: fully functional, Milling Machining Center - Vertical / Brand: DECKEL MAHO / Type: DMC 63V / Year of construction: 1999 The machine can be inspected by appointment under power. Well-maintained and very good functional condition. Spindle replacement: 18.03.2022 Spindle hours (03/13/2025): 51.206 h The machine has a Lehmann A-axis and counter bearing (as new). Kedpev Nxbysfx Adwjll TECHNICAL DATA: Working area: - X-axis: 630 mm - Y-axis: 500 mm - Z-axis: 500 mm Feed/axis drives: - Advancing force X, Y, Z (100 % ED): 6.000 N - Feed rate: 0 - 30.000 mm/min - Rapid feed X, Y, Z: 30 m/min - Diameter ball screw/pitch (X, Y, Z): 40/20 mm Positioning accuracy: - Pmax in X, Y, Z-axis to VDI/DGQ 3441: 0,015/0,010 mm (indirect/direct measuring system) Distance measuring system: - Input unit: 0,001 mm Working spindle: - Drive power (40/100 % ED): 13/9 kW - Torque (40/100 % ED): 83/57 Nm - Speed range: 1 - 10.000 rpm - Tool holder DIN 69 871-A: SK40 - Tool clamping force: 12.000 N Tool magazine: - Tool changing system: Pick-up - Number of magazine positions: 24 - max. Tool-Ø with vacant neighboring spaces: 80/140 mm - max. Tool length: 300 mm - max. Tool weight: 7 kg - Chip-to-chip time: 6,5 sec - Rotational speed/tool magazine: 47 rpm - max. Maximum loading weight of the tool magazine (24 x 3 kg): 72 kg Machine/Working table: - Clamping surface with T-slots DIN 650-14: 800 x 500 mm - Table load (set-up weight): 500 kg - Loading height: 850 mm - max. Workpiece height (at max. tool length): 240 mm EQUIPMENT: - CNC-Control: Siemens 810D powerline - Lehmann A-axis and counter bearing (as new) - Direct measuring system - Internal cooling through the spindle, 15 bar - Coolant system (emulsion) - Electronic hand wheel - Chip conveyor - Documentation - CE marking There is no guarantee for correctness and completeness of the technical details and accessoires. - Subject to prior sale -

Condition: good (used), Year of construction: 2008, Ref. -No.: 10621 Manufacturer: PAMA Type: Speedmat 3/TR16 Year of construction: 2008 Type of control: CNC Control: SIEMENS SINUMERIK 840 D PL Storage location: Halberstadt Country of origin: Italy X-Travel: 3500 mm Y-Travel: 2500 mm Z-Travel: 2200 mm W-Axis: 800 mm Bore Spindle Diameter: 160 mm Table Load: 12000 kg Table surface: 1600 x 2000 mm Tool Taper: ISO 50 BIG PLUS Turning Speeds: 3500 RPM Kljdeyagikopfx Adwol Max. Torque: 2.765 Nm Rapid Travel X/Y/Z: 25000 mm / min Drive Capacity - Spindle Motor: 46 kW Internal cooling: 15 / 45 bar External cooling: 50 / 4 bar Spindle speed gear stage 1: 2.120 1 / min Spindle speed gear stage 2: 2.765 1 / min Further information: Automatic tool changer SK50 DIN 69871, 80 positions. Automatic angle milling head TS 35 with 360 positions, speed 2,000 rpm and torque 2,000 Nm. Automatic universal milling head TU25C (2-axis), speed 3,000 rpm and torque 800 Nm. Automatic accessory changer, 2+1 units. Touch probe (Renishaw). The machine can be inspected under power.

Condition: good (used), Year of construction: 1997, Ref. -No.: 10620 Manufacturer: SKODA Type: W 200 T Year of construction: 1997 Type of control: CNC Control: SIEMENS SINUMERIK 840 Storage location: Halberstadt Country of origin: Germany X-Travel: 16000 mm Y-Travel: 5150 mm Z-Travel: 1600 mm W-Axis: 2100 mm V-axis: 2000 mm Kjdjyagidepfx Adwell B-Axis: 0 - 360 ° Spindle Diameter: 200 mm Table Load: 80.000 kg Tool Taper: SK 60 / SK 50 Turning Speeds: 1000 RPM Rotary table diameter: 3500 x 3000 mm Further information: Including angle head Machine can be inspected under power.

Condition: ready for operation (used), incl. tool holder Ksdpfx Aeyaxyhodwjll

Condition: used, Year of construction: 2005, x-travel 780 mm y-travel 560 mm z-travel 560 mm total power requirement --- kW weight of the machine ca. 12,0 t Klodpfx Aoyb S Ibsdwjl dimensions of the machine ca. --- m

Condition: excellent (used), Catalog number 7382 TECHNICAL DATA Tenoning carriage: - Electric feed with stepless speed adjustment - Carriage adjustable at an angle - Feed motor: 0.46 kW - Table size (L/W): 700x450mm, extendable to 1150mm - Cross fence on carriage – cutting length on extendable telescope: 1860mm - Rotary block in the fence - 2 pneumatic clamps Crosscut saw: - Max blade diameter: 380mm - Max cutting height: 110mm - Blade adjustable up/down, forward/backward, and at an angle - Blade guard - Saw motor: 2.2 kW Tenoning spindle: - Pneumatic spindle stroke - Spindle up/down and stroke adjustment via handwheels - Max tool diameter: 320mm Klodpfxjx S Iw Uo Adwel - Spindle diameter: 40mm - Working spindle height: 220mm - Spindle lock - Motor: 7.5 kW Profiling spindle: - Pneumatic spindle stroke - Spindle up/down and stroke adjustment via handwheels - Max tool diameter: 200mm - Working spindle height: 220mm - Spindle diameter: 54mm - Spindle lock - Extendable table support - Motor: 7.5 kW Glazing bead saw: - Max blade diameter: 200mm - Blade bore: 30mm - Blade adjustable forward/backward, up/down - Blade guard - Motor: 2.2 kW Feed unit: - Number of rollers: 8 pcs - Motor approx. 0.55 kW - Roller size: 110x50mm - 8 feed speeds: 4, 6, 8, 10, 12, 15, 20, 30 m/min - Extraction port diameters: 60mm, 2x130mm, 110mm, 100mm - Operating pressure: 6-8 bar - Dimensions (L/W/H): 3600x2100x1600mm, weight approx. 2500kg FEATURES – For window production – Pneumatic spindle stroke – Carriage with electric feed – Crosscut saw – Tenoning spindle – Not repainted, used machine, in very good condition Net price: 27,900 PLN Net price: 6,640 EUR (based on the exchange rate of 4.2 PLN/EUR) (Prices may change with significant currency fluctuations)

Condition: used, Year of construction: 1986, Used machine Year of manufacture: 1986 Features and technical data: Motor: 4 kW Speeds: 3000 / 4500 / 6000 / 8000 / 10000 rpm Spindle height adjustment via handwheel Dimensions (LxWxH): 1200x80x1350 mm Fence jaws made of wood Including wood-based 3-roller power feed with stand Kledpfxsxllxao Adwjl With chassis Dimensions: to follow Weight: to follow Availability: short-term Location: Flörsheim

Condition: used, Year of construction: 1996, total height: 3,200 mm, total width: 3,200 mm, total length: 8,000 mm, Empty weight: 26.000 kg Price: On request Bed Milling machine Bed Miller Model: CNC Manufacturer: Anayak Type: FBZ-HV-4000 CNC: Heidenhain Year: 1996 Bed-dimensions: 4500x800mm X-travel: 4000mm Y-travel: 935mm Z-travel: 1000mm Rotatable Fräsekopf Spindle-speed: 3000rpm Spindle-take: ISO 50 Incl. peripherals and documents Dismantled for transport Video available! Machine-dimensions: 8000x3200x3000mm Machine-weight: 26000kg - Year: 1996 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: 11676-FBZ - Number of axes: 3 - Travel X [mm]: 4000 - Travel Y [mm]: 935 - Travel Z [mm]: 1000 - Spindle speed max. [rpm]: 3000 - Tool holder: ISO50 - Table size length [mm]: 4500 - Table size width [mm]: 800 - Control type: Heidenhain - Transport dimensions: 8000mm x 3200mm x 3200mm (l x w x h) - Transport weight [kg]: 26000kg Klsdpfxswnhnfe Adwjl - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Year of construction: 1997, condition: used, Price: On request - Year: 1997 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Drive system: CNC - Number of axes [pcs]: 5 - X-axis travel [mm]: 1200 - Y-axis travel [mm]: 880 - Z-axis travel [mm]: 800 - Table length [mm]: 5000 - Tool holder: SK40 - Max. spindle speed [rpm]: 18000 - Options: Digital readout - └ Type of digital readout: Heidenhain Kjdpfx Aewh Shvjdwsll Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum