Used Ending Range for sale (20,130)

Condition: ready for operation (used), Year of construction: 2016, operating hours: 152 h, functionality: fully functional, machine/vehicle number: 665182, travel distance X-axis: 650 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 500 mm, spindle speed (max.): 42,000 rpm, number of slots in tool magazine: 40, No minimum price – guaranteed sale to the highest bidder! Submitting a bid obligates you to collect the item within the period from September 21st to October 1st! Spindle replacement for €40,000 in 2025! Since then, only approximately 150 spindle operating hours! TECHNICAL DETAILS Knjdpsz Aplxsfx Afdjb Travel range X-axis: 650 mm Travel range Y-axis: 550 mm Travel range Z-axis: 500 mm Feed rates Feed rate X-axis: 30 m/min Feed rate Y-axis: 30 m/min Feed rate Z-axis: 30 m/min Spindle Spindle mounting: HSK-E 40 Spindle speed: 42,000 rpm Spindle operating time: 151 h 20 min 08 s Spindle replacement: 2025 Cost of spindle replacement: approx. €40,000 Tool magazine Number of tool positions: 40 Pallet system Pallet dimensions: approx. 320 × 320 mm Pallet clamping: Rotary table MACHINE DETAILS Mains voltage: 400 V Mains frequency: 50 Hz Control voltage: 24 V DC Maximum fuse rating: 63 A Connected power: 38 kVA Dimensions and weight Overall height: 2,850 mm Overall length: 3,300 mm Overall width: 2,400 mm Machine weight: 9,000 kg EQUIPMENT - Technical documentation - Manual - HSK-E 40 tool holders - 3 pallets External reference: Demo - Lot 5

Condition: ready for operation (used), Year of construction: 2007, pressing force: 28 t, stroke length: 200 mm, throat depth: 200 mm, installation height: 325 mm, working length: 835 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Press force: 28 t Bending length: 835 mm Travel range of the back gauge: 0 – 370 mm Stroke: 200 mm Distance between frames: 890 mm Support table: 200 x 275 mm Overhang: 200 mm Installation height: 325 mm Number of cylinders: 1 Working speed Press travel: 8-10 mm/s Retraction: max. 35 mm/s Positioning accuracy: +/- 0.05 mm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 1,600 x 1,500 x 2,200 mm Total weight: 3,500 kg EQUIPMENT Operating manual Safety device Mechanical tool clamping (top) Kedpfozzkwgex Afdenb The height and weight of the asset must be taken into account when selecting the transport vehicle. A forklift is available for loading. If the asset is not collected on time, a storage fee of €20.00 per lot and per day (or part thereof) will be charged. The fee must be paid before collection. The sale is made without any warranty or guarantee. The information on the technical data comes from the original offer. No guarantee is given for typographical or measurement errors. If in doubt, please compare the information with the photos provided or inspect the goods on-site before the end of the auction.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2004, roller (bottom) diameter: 140 mm, roller (top) diameter: 140 mm, working width: 1,500 mm, sheet thickness (max.): 5 mm, overall weight: 1,200 kg, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Number of rollers: 3 Number of driven rollers: 2 Max. sheet thickness: 5 mm Max. working width: 1,500 mm Diameter of top roller: 140 mm Diameter of bottom rollers: 140 mm MACHINE DETAILS Drive: Hydraulic Knedpozza U Uefx Afdsb Control: Conventional Power: 3 kW Dimensions & Weight Dimensions (L x W x H): 2,900 x 900 x 1,400 mm Unladen weight: 1,200 kg Transport packages: 1 EQUIPMENT CE marking

Condition: used, Year of construction: 2017, machine/vehicle number: 1739289, input current: 10 A, protection type (IP code): IP20, welding current (max.): 2,000 A, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Supply voltage: 24 V DC / 90 V DC Input current: 1 A / 10 A Welding current: up to 2,000 A at 2% duty cycle Protection class: IP20 Kodpfxezzk Rmj Afdsnb Polarity: STD Design: Closed protective housing made of aluminum profiles Safety enclosure: With protective doors MACHINE DETAILS Control cabinet: Integrated Equipment cabinet: Mobile EQUIPMENT Signal light Welding torch Connection cable Mobile equipment cabinet Documentation The height and weight of the asset must be taken into account when selecting the transport vehicle. A forklift is available for loading. If the asset is not collected on time, a storage fee of €20.00 per lot and commenced day will be charged. The fee must be paid before collection. The sale is made without any guarantee or warranty. The information on the technical data is based on the original offer. No liability is accepted for typographical or measurement errors. If in doubt, please compare the information with the provided photos or inspect the goods on site before the end of the auction.

Condition: ready for operation (used), Year of construction: 1992, functionality: fully functional, machine/vehicle number: 9220212, travel distance X-axis: 3,200 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 1,000 mm, spindle speed (max.): 2,000 rpm, workpiece weight (max.): 4,000 kg, TECHNICAL DETAILS X-axis travel: 3,200 mm Y-axis travel: 1,000 mm Z-axis travel: 1,000 mm B-axis rotation: 360° C-axis rotation: 360° Spindle speed range: 40 – 2,000 rpm Tool holder: ISO 50 Main spindle power: 15 kW Number of axes: 3 Table length: 3,500 mm Table width: 800 mm Maximum workpiece weight: 4,000 kg MACHINE DETAILS Control system: Conventional Model: Bed milling machine with traversing table Dimensions & Weight Dimensions (L x W x H): 5,300 x 3,000 x 2,700 mm Kodpfjzza U Iox Afdenb Shipping weight: 11,000 kg Number of shipping packages: 1 EQUIPMENT Digital display: Sony 3-A

Condition: ready for operation (used), Year of construction: 2009, functionality: fully functional, machine/vehicle number: 675002, travel distance X-axis: 650 mm, travel distance Y-axis: 1,100 mm, travel distance Z-axis: 500 mm, empty load weight: 13,000 kg, TECHNICAL DETAILS Travel range, X-axis: 650 mm Travel range, Y-axis: 1,100 mm Travel range, Z-axis: 500 mm C-axis rotation: 360° Tool magazine slots: 32 pcs. MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 3,500 x 1,800 x 2,800 mm Dry weight: 13,000 kg Transport packages: 3 pcs. Knsdpfxszxckmj Afdjb EQUIPMENT Documentation CE marking

Year of construction: 2025, condition: repair required (used), functionality: limited functionality, machine/vehicle number: 54942, No minimum price – guaranteed sale to the highest bidder! EXW – Dismantling and loading must be organized by the buyer! TECHNICAL DETAILS Nominal test force: 50 kN Test stroke: < 1,400 mm Usable distance between pressure plates: approx. 800 mm Test area width: 500 mm Test speed: continuously variable 0.001–1,200 mm/min Resolution of displacement measurement: ≤ 0.001 mm Diameter of pressure plates: 246 mm Centering bore: 40 mm Thread: M12 Hardness: ≥ 56 HRC Design: Steel, hardened, rotatable at the top and bottom, lockable at 0° Measuring range of the enveloping circle: 30–250 mm Design: Probe with bearing rollers Measurement: Recording under load MACHINE DETAILS Control system: Control system with control computer Test program: Enveloping circle measurement Network: Fast Ethernet, 100 Mbit/s between the control computer and the separately required operating PC Software delivery: USB stick with installation software Documentation: Version and license status not documented separately Last calibration: 08/04/2025 Dimensions & Weight Machine dimensions: approx. 750 × 900 × 1,950 mm Base frame dimensions: approx. 730 × 900 × 700 mm Control cabinet with control computer dimensions: approx. 600 × 600 × 1,900 mm Machine weight: approx. 490 kg Base frame weight: approx. 50 kg Voltage supply: 3 × 400 V AC, 50 Hz, N + PE Type plate power: 3,000 W Connected power: approx. 3 kVA EQUIPMENT Base frame Control cabinet with control computer Knjdezx S Egjpfx Afdsb Rotatable pressure plates Enveloping circle measuring device with probes and bearing rollers USB stick with installation software Compressed air connection: Pneumatic connection with shut-off valve Note: The functionality has been tested and confirmed. However, an unresolved error message on the drive prevents further use. The machine is in like-new condition visually. The operating PC is not included in the offer.

Condition: ready for operation (used), Year of construction: 1990, functionality: fully functional, machine/vehicle number: 018.0402, gear diameter: 300 mm, controller model: Optronic CNC D140, workpiece width (max.): 2,300 mm, workpiece height (max.): 500 mm, center height: 250 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Gear diameter: 300 mm Module range: 0.5–8 mm Pressure angle: 35° Max. workpiece width: 2,300 mm Max. workpiece height: 500 mm Max. workpiece weight: 100 kg Kodpfezzba Sox Afdsnb Center height: 250 mm Table length: 2,300 mm Grinding spindle travel: 200 mm MACHINE DETAILS Control system: Optronic CNC D140 Dimensions & Weight Dimensions (L x W x H): 5,900 x 1,300 x 2,000 mm Net weight: 7,500 kg Shipping packages: 5 units

Condition: ready for operation (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: 5752, travel distance X-axis: 1,250 mm, travel distance Y-axis: 540 mm, travel distance Z-axis: 520 mm, spindle speed (max.): 2,000 rpm, controller manufacturer: Heidenhain, TECHNICAL DETAILS Travel range, X-axis: 1,250 mm Travel range, Y-axis: 540 mm Travel range, Z-axis: 520 mm Table length: 1,800 mm Table width: 400 mm Tool holder: BT50 Main spindle power: 7.5 kW Spindle speed: 275–2,000 rpm MACHINE DETAILS Control: CNC Control system: Heidenhain Number of axes: 3 Connected power: 12 kW Dimensions & Weight Dimensions (L × W × H): 2,100 × 2,100 × 2,200 mm Net weight: 3,600 kg Number of transport packages: 2 EQUIPMENT Tools Documentation CE marking Knsdpfx Ajzxdxljfdob

Condition: like new (used), Year of construction: 2022, controller model: Siemens Touch Panel KTP 600, bending angle (max.): 180 °, bending radius (max.): 200 mm, overall weight: 500 kg, power: 1.5 kW (2.04 HP), No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Bending direction: right Tube diameter steel: 4–28 × 3 mm Tube diameter non-ferrous metals: 4–35 × 2 mm Bending radius: max. 200 mm Bending height: 25 mm Bending speed: up to 45 °/s Effective bending angle: up to 180° + 10° overbending Switch-off accuracy: 0.1° Tube feed length: 1,500 mm MACHINE DETAILS Control: electronic Control model: Siemens Touch Panel KTP 600 Bending axis: electronically controlled Bending angle switching: automatic Program memory: 100 programs with 20 data sets each Target/actual value display for bending angle Tube clamping: hydraulic Clamping pressure: adjustable Slide block positioning: hydraulic Bending mandrel retraction: hydraulic Pump type: HD gear pump Pump capacity: 4.5 l/min Hydraulic pressure: 180 bar Bending head: free-standing Control panel: swiveling Machine design: mobile Maximum sound level: approx. 78 dB(A) Knjdjzzlc Ropfx Afdsb Drive type: electro-hydraulic Drive power: 1.5 kW Mains voltage: 400 V Frequency: 50 Hz Phases: 3 Control voltage: 24 V DC Electrical standard: VDE Protection class: IP54 Dimensions & Weight Dimensions (L x W x H): 2,200 x 600 x 1,100 mm Weight: 475 kg EQUIPMENT Siemens Touch Panel KTP 600 Function keys with plain text display for operator guidance Automatic bending angle switching Target/actual value display for bending angle Swiveling control panel Free-standing bending head Hydraulic tube clamping with adjustable clamping pressure Hydraulic slide block positioning Hydraulic bending mandrel retraction Mobile machine design The height and weight of the asset must be considered when selecting the transport vehicle. A forklift is available for loading. If the item is not collected on time, a storage fee of €20.00 per lot and commenced day will be charged. The fee must be paid before collection. The sale is made with the exclusion of any warranty or guarantee. The information on the technical data is based on the original offer. No guarantee is given for printing or measurement errors. If in doubt, please compare the information with the provided photos or inspect the goods on site before the end of the auction.

Condition: excellent (used), Orange vending machine Knjdpfjfnbnqox Afdjb Place of Origin: Spain Manufacturer: Zummo Model: Z10A Weight: 298 Kg Feeder Capacity: 45-50Kg. (110 lbs) Automatic delivery: 100-110 servings without need to replenish fruit Serving Delivery Time: 20-26 seconds Fruit size: 55-75mm Optional: Large Fruit Kit: 70-90mm Glasses: Anti-static glasses Cooling Fluid: R134A Dimension: 1830mm. x 1000mm. x 680mm.

Condition: used, Year of construction: 2013, travel distance X-axis: 508 mm, travel distance Y-axis: 406 mm, travel distance Z-axis: 508 mm, spindle speed (max.): 15,000 rpm, Equipment: chip conveyor, TECHNICAL DETAILS Travel range, X-axis: 508 mm Travel range, Y-axis: 406 mm Travel range, Z-axis: 508 mm Distance from spindle nose to machine table: max. 610 mm Distance from spindle nose to machine table: min. 102 mm Rated power: max. 22.4 kW Torque: max. 122.0 N·m at 2,000 rpm Torque with optional gearbox: max. 339 N·m at 450 rpm Spindle design: metric Spindle taper: SK40 Spindle speed: 15,000 rpm Table length: 660 mm Table width: 356 mm Width of T-slots: 15.90 to 16.00 mm Center distance of T-slots: 125 mm Number of T-slots in standard configuration: 3 Load capacity of the table with uniform distribution: max. 1,361 kg Feed rate during machining: max. 16.5 m/min Rapid traverse, X-axis: 25.4 m/min Rapid traverse, Y-axis: 25.4 m/min Rapid traverse, Z-axis: 25.4 m/min Tool diameter (overall): max. 89 mm Tool weight: max. 5.4 kg Tool-to-tool change time (average): 4.20 s Chip-to-chip change time (average): 4.50 s MACHINE DETAILS Coolant tank capacity: 208 l Input voltage AC, three-phase, low: 220 V AC Full-load current, three-phase, low: 70 A Knodpfxezxhmtj Afdeb Input voltage AC, three-phase, high: 440 V AC Full-load current, three-phase, high: 35 A Weight: 3539 kg The seller estimates the operating hours to be approximately 9,000 hours. EQUIPMENT 20-position tool changer Chip conveyor Internal cooling, 21 bar Coolant mist extraction system Additional coolant filter

Condition: refurbished (used), functionality: fully functional, machine/vehicle number: RF5060-5-2021, Year of construction: 2021, Bradman Lake SL80 Semi-Automatic End-Load Cartoner Knedpfx Afjxqmmpedob • Speed: up to 80 cartons per minute • Carton Size Range: A 50–254 mm | B 19–100 mm | C 130–305 mm • Feed: manual loading area for 2 operators • Glue System: Nordson ProBlue 4 hot-melt unit • Construction: stainless steel frame & panels, hygienic design, CE compliant • Vacuum Pump: Busch • Features: SIKO digital readouts, inverter drive, castors for mobility

Condition: ready for operation (used), Year of construction: 1998, operating hours: 1,16,213 h, travel distance X-axis: 245 mm, travel distance Z-axis: 1,035 mm, controller manufacturer: MAZATROL, controller model: T-Plus, number of axes: 3, This 3-axis Mazak SQT-30M * 1000 turn-mill centre was manufactured in 1998. It features a maximum turning diameter of 410 mm and a turning length of 989 mm. The machine is equipped with a Mazatrol T-Plus control system and offers a spindle speed range of 35 - 3,300 rpm. If you are looking to get high-quality turning capabilities, consider the Mazak SQT-30M * 1000 machine we have for sale. Contact us for further details. - Working Hours: 116,213 hours- Max. Swing Diameter: 560 mm- Max. Swing Over Carriage: 500 mm- Max. Turning Diameter: 410 mm- Standard Turning Diameter: 336 mm- Max. Turning Length: 989 mm- Max. Bar Capacity (Diameter): 77 mm- Main Spindle Speed Range: 35 - 3,300 rpm- Main Spindle Motor Power: 26 kW / 22 kW (30 min / 100% continuous)- Max. Spindle Torque: 637 Nm- Spindle Nose: A2-8"- Spindle Through-Hole: 88 mm- Chuck Diameter: 304 mm- C-Axis Indexing: 0° - 360° / 0.001°- Turret Positions: 12- Turning Tool Shank Size: 25 x 25 x 150 mm- Boring Bar Shank Diameter Range: 8 / 10 / 12 / 16 / 25 / 32 / 40 / 50 mm- Turret Indexing Time: approx. 2.2 s- Driven Tools Motor Power: 7.5 kW- Driven Tools Max. Torque: 96 Nm- Driven Tools Speed Range: 90 - 1,500 rpm- Driven Tools Drilling Capacity: 23 mm- Driven Tools Tapping Capacity: M16 (H-type holder) / M12 (V-type holder)- Driven Tools End Milling Capacity: 25 mm- X-Axis Travel: 245 mm- Z-Axis Travel: 1,035 mm- X-Axis Rapid Traverse: 18 m/min- Z-Axis Rapid Traverse: 24 m/min- C-Axis Rapid Traverse: 100 rpm- X/Z-Axis Feed Rate: 0 - 5,000 mm/min- C-Axis Feed Rate: 1° - 2,000°/min- Tailstock Quill Stroke: 130 mm- Tailstock Quill Diameter: 100 mm- Tailstock Taper: MK 4- Tailstock Travel: 880 mm- Coolant Tank Capacity: 250 l- Coolant Pump Flow Rate: approx. 20 l/min- Coolant Pump Pressure: 5 bar- Power Capacity: 52 kVA- Operating Voltage: 400 V / 50 Hz- Pneumatic Pressure: 5 bar, 100 l/min- Required Floor Space: approx. 7.7 m²- Machine Weight: approx. 9,500 kg- Additional Equipment & Accessories: Tool Eye (tool presetter), 3-jaw hydraulic chuck 304 mm with soft/hard jaws, chip/coolant guard enclosure, work light, synchronized tapping, driven tool holders (CAT40 3x vertical, 3x horizontal), boring bar holders, set of adjusting tools, foundation equipment Technical Specification Counter Spindle No Knjdpjz D Dfgjfx Afdsb Driven Tools Yes

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 420 mm, travel distance Z-axis: 450 mm, controller model: Heidenhain iTNC 620, spindle speed (max.): 12,000 rpm, No minimum price – guaranteed sale to the highest bidder! Note: The machine is located on the first floor. The main difference between the MTRent MTcut v60 and the MTRent MTcut v60D lies in the inclusion of an additional rotary axis ("D" stands for rotary table or integrated 4th axis for extended machining capabilities). TECHNICAL DETAILS Travel in X-axis: 600 mm Travel in Y-axis: 420 mm Travel in Z-axis: 450 mm Distance from spindle nose to table: 120–570 mm Spindle speed range: 60 – 12,000 rpm Torque: 70 Nm (S6, 40 %) Spindle power: 11 kW (40 %) Spindle cooling: Oil/Air Tool interface: SK40 Pull stud: DIN 69871/72 Table dimensions: 750 × 420 mm Number of T-slots: 5 T-slot width: 14 mm H8 T-slot spacing: 65 mm Rapid traverse X/Y/Z: 32 Feed rate: 1 – 12,000 mm/min Positioning accuracy: ±0.005 mm Repeatability: ±0.003 mm Tool positions: 30 Tool change time: 1.5 s Maximum tool weight: 6 kg Maximum tool diameter: 76 mm Maximum tool length: 250 mm MACHINE DETAILS Control system: Heidenhain iTNC 620 Central lubrication: R68 (ISO 68) Hydraulic oil: R32 (ISO 32) Compressed air connection: 3/8" Compressed air: 6–8 bar Power supply: 400 V Fuse rating: 63 A Connected power: 25 kVA Coolant tank: 160 l Linear guides X/Y/Z: 30/35/35 mm Machine bed: Meehanite casting Kodpfxozzlhae Afdsnb Machine weight: 4,000 kg EQUIPMENT Rotary table or integrated 4th axis Heidenhain iTNC 620 CNC control Digital Heidenhain drive technology Ceramic-bearing precision spindle Separate spindle cooling for constant temperature Integrated chip conveyor Maintenance-free Siemens spindle motor THK linear guides in all three axes 30-position tool changer with dual gripper Central lubrication Large access door to the work area Loading option from above using an overhead crane Two waterproof work area lights CE certification • The height and weight of the asset must be considered when selecting the transport vehicle. • A forklift is available for loading. • If the item is not collected on time, a storage fee of €20.00 per lot and for each day started will be charged. The fee must be paid before collection. • The sale is made without any warranty or guarantee. • The information on the technical specifications comes from the original offer. • No liability is accepted for typing or measurement errors. If in doubt, please compare the information with the provided photos or inspect the item on site before the end of the auction.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2007, machine/vehicle number: 600007090, roller (bottom) diameter: 280 mm, roller (top) diameter: 280 mm, working width: 3,100 mm, sheet thickness (max.): 13 mm, power: 15 kW (20.39 HP), TECHNICAL DETAILS Number of rollers: 4 Number of driven rollers: 2 Diameter of upper roller: 280 mm Diameter of lower rollers: 280 mm Max. sheet thickness: 13 mm Max. pre-bending thickness: 10 mm Kodpfxjzxdk Ij Afdsnb Max. working width: 3,100 mm Bending speed: 5,000 mm/min Drive: Hydraulic Control: Conventional Power: 15 kW MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 5,810 x 1,980 x 1,540 mm Weight: 11,500 kg Transport packages: 2 EQUIPMENT CE marking

Condition: good (used), Year of construction: 2004, functionality: fully functional, IRLE IRD 1600 CNC End finishing machine Manufacturer: IRLE, Type: IRD 1600 CNC Year of manufacture: 2004, Control: Max. workpiece diameter: 1,625 mm Min. workpiece pipe diameter: 406 mm Max. workpiece pipe length: 13,200 mm Min. workpiece pipe length: 6,000 mm Min. pipe wall thickness: 12 mm Max. pipe wall thickness in copying mode: approx. 40 mm Max. pipe wall thickness in CNC mode: 70 mm Max. pipe weight: 250 kN Height between the hall floor and the pipe inlet: 800 mm Overall machine length: approx. 24,000 mm Overall machine width: approx. 4,100 mm Overall height from floor to top of clamping fixture: 5,000 mm Machine weight: approx. 700 kN Knodpfezqun Uex Afdjb 01 - Intermediate carriage with travel drive Carriage length: approx. 3,950 mm Carriage width: approx. 1,800 mm Carriage height incl. undercarriage: approx. 600 mm Travel speed on the base rails: 500 - 5,000 mm/min 01 - Intermediate carriage with travel drive Carriage length: approx. 3,950 mm Carriage width: approx. 1,800 mm Carriage height incl. undercarriage: approx. 600 mm Travel speed on the base rails: 500 - 5,000 mm/min 02 - Headstock Rotational speed range of the faceplate: 7 - 27 - 105 min" Motor speeds: 300 - 1,150 - 4,500 min" Motor power: 100 kW Motor power in S1 operation: 14.3 - 129 - 105 kW Max. torque of the faceplate in S1 operation: 33,000 Nm Rated speed: 27 min" Diameter of the main spindle in the front bearing: 300 mm 03 - Faceplate, X-axis Faceplate diameter: approx. 1,950 mm Travel distance of the NC tool holder: approx. 650 mm Feed rate of the adjustable tool holder: 0.5 - 1,500 mm/min (infinitely adjustable) Max. achievable feed force: 25 kN 04 - Feed drive; Z-axis Feed travel of the headstock on the machine bed: 800 mm, infinitely variable Three-phase controlled servomotor: 0.5 - 200 mm/min Rapid traverse speed: 1,500 mm/min Feed force: 30 kN Torque of the feed motor Mt = 27 Nm 05 - Pipe clamping mandrels Clamping range: 406 - 1,625 mm Pipe weight per mandrel: 150 kN Adjustable clamping force: 10 - 200 kN Max. adjustment speed of the centrally adjustable clamping crossbars: 600 mm/min

Condition: good (used), Year of construction: 2004, functionality: fully functional, turning diameter over cross slide: 600 mm, turning length: 670 mm, turning diameter: 490 mm, overall weight: 6,500 kg, FOR SALE: High-Quality CNC Lathe Biglia B 658 MB (Year of Manufacture 2004) with Driven Tools + KID 70 Bar Feeder Are you looking for a reliable and robust workhorse for metalworking? For sale is a Biglia B 658 MB CNC lathe in good and fully functional condition. The machine is equipped with driven tools, an automatic tailstock, a reliable Fanuc control, and includes an automatic bar feeder. The complete package is available ex stock. General Information Manufacturer: Biglia (Italy) Model: B 658 MB Year of manufacture: 2004 CNC control: FANUC Series 18i-TB Condition: Good, fully functional Availability: Ex stock --- Key Technical Characteristics (Lathe) Maximum turning diameter: 380 mm Maximum turning length: 650 mm Maximum rod/bar diameter: 80 mm Maximum passage: 620 mm Spindle speed range: 30–3000 rpm Spindle drive power: 26/22 kW Spindle end: ASA 8″ Spindle bore diameter: 90 mm Diameter of the lathe chuck: 315 mm Bidirectional turret: 12 positions Turret indexing time (per position): 0.1 s Driven tool stations: 12 positions Max. speed of driven tool stations: 4000 rpm Max. torque of driven tool stations: 3.7 kW Feed in the X/Z/B axis: 220 / 650 / 660 mm Rapid traverse in the X/Z/B axis: 20 / 24 / 12 m/min Automatic tailstock maximum clamping force: 1080 Kg --- Round bar diameter: min. 5 mm (3/16") – max. 70 mm (2" 3/4) Square bar side: min. 5 mm (3/16") – max. 50 mm (2") Hexagonal bar height: min. 5 mm (3/16") – max. 60 mm (2 1/4") Maximum bar length options: 500 mm / 1615 mm Magazine capacity: 250 kg (e.g., approx. 60 bars of 10 mm) Bar change time: 50 sec (with a 1000 mm bar) Feed speed: 0–500 mm/sec Return speed: 1000 mm/sec Supply voltage: 230/400 Volt Control voltage: 24 Volt Installed power: 2 kW Weight: 580 kg Kjdpfszbx N Eox Afdjnb Additional Equipment & Features KID 70 Bar feeder Measuring arm (Touch setter) Chip conveyor Collet chuck DIN 6343 Coolant tank capacity: 250 liters Coolant pump capacity: 150 l/min Coolant pump power: 0.73 kW Noise level: 74 dB(A) Physical Dimensions (Lathe) Dimensions (L x W x H): 4000 x 1900 x 1850 mm Weight of the Biglia B658/BM: approx. 6,000 kg Contact us today to request a quote for this complete production package! The machines are ready for immediate dispatch. > *(All information is given in good faith but we reserve the right to make errors)*

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 155-110000, Year of construction: 2017, operating hours: 20,000 h, total length: 1,300 mm, total height: 2,000 mm, total width: 900 mm, overall weight: 601 kg, input voltage: 380 V, input current: 8 A, For sale: Professional industrial Stratasys Fortus 450mc FDM 3D printer in exceptionally good condition. A highly reliable and precise 3D printer, ideal for functional prototypes, jigs/fixtures, and end-use components in technical plastic materials. The machine is supplied as a complete, turnkey solution, including an SCA 3600 post-processing station, a wide range of print nozzles (tips), material canisters, and consumables. Specifications & Machine Information * Model: Stratasys Fortus 450mc * Serial number: K10456 * Software version: 6.8.7102.0 * Build volume: 406 x 355 x 406 mm * Activated material licenses: Extensive license package included: * ABS (ABS-M30, ABS-M30 Black/Blue/Custom/Grey/Red/White, ABS_ESD7, ABS_M30I) * ASA (FLUX/BLU, DGRY, GRN, LGRY, ORG, RED, WHT, YEL, BLK) * PC / PC-ABS / PC-ISO (incl. PC-ISO Translucent & PC Support) Knodpfx Afszqz Hwsdjb * Nylon 12 / NYL12CF (Carbon Fiber) * Antero 800NA / Antero 840CN03 * ST130 * Soluble Supports (SR30, SR35, SR100, SR110) Included equipment & accessories 1. Post-processing & Chemicals * SCA 3600 (Support Cleaning Apparatus): Washing station for easy and automatic removal of soluble support materials (SR30/SR100/SR110). * WaterWorks Concentrate P400SC: Cleaning concentrate for washing tanks. 2. Nozzles & Print Head Components (Tips) Large, assorted selection of print and support nozzles, as well as scrapers (see image): * Modeling tips: T12, T14, T16, T20, T20C * Support tips: T12SR100, T12SR30, SR30/35, U1010S1, ULTEM Support T16, etc. * Extra scraper blades/cleaners. 3. Materials & Canisters Large selection of filament spools/canisters and original boxes included (incl. ULTEM 9085, ULTEM Support, ASA, ABS-M30, PC Support, SR-110 soluble support, etc. – please note that some may be partially used or past their expiration date, but have been stored in a dry place).

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 420 mm, travel distance Z-axis: 450 mm, controller model: Heidenhain iTNC 620, spindle speed (max.): 12,000 rpm, No minimum price – guaranteed sale to the highest bidder! Note: The machine is located on the first floor. TECHNICAL DETAILS Travel range X-axis: 600 mm Travel range Y-axis: 420 mm Travel range Z-axis: 450 mm Distance spindle nose – table: 120–570 mm Speed range: 60 – 12,000 rpm Torque: 70 Nm (S6, 40 %) Spindle power: 11 kW (40 %) Spindle cooling: Oil/air Tool holder: SK40 Pull stud: DIN 69871/72 Table dimensions: 750 × 420 mm Number of T-slots: 5 T-slot width: 14 mm H8 T-slot spacing: 65 mm Rapid traverse X/Y/Z: 32 Feed rate: 1 – 12,000 mm/min Positioning accuracy: ±0.005 mm Repeatability: ±0.003 mm Tool positions: 30 Tool change time: 1.5 s Maximum tool weight: 6 kg Maximum tool diameter: 76 mm Maximum tool length: 250 mm MACHINE DETAILS Control system: Heidenhain iTNC 620 Central lubrication: R68 (ISO 68) Hydraulic oil: R32 (ISO 32) Compressed air connection: 3/8" Compressed air: 6–8 bar Knedpszzlh Hefx Afdjb Power supply: 400 V Fuse rating: 63 A Connected power: 25 kVA Coolant tank: 160 l Linear guides X/Y/Z: 30/35/35 mm Machine bed: Meehanite casting Machine weight: 4,000 kg EQUIPMENT Heidenhain iTNC 620 CNC control system Digital Heidenhain drive technology Ceramic-bearing precision spindle Separate spindle cooling for constant temperature Integrated chip conveyor Maintenance-free Siemens spindle motor THK linear guides in all three axes 30-position tool changer with double gripper Central lubrication Large access door to the work area Loading possible from above using an overhead crane Two waterproof work area lights CE certification The height and weight of the asset must be taken into account when selecting the transport vehicle. A forklift is available for loading. If the item is not collected on time, a storage fee of €20.00 per lot and day started will be charged. The fee must be paid before collection. The sale is made with the exclusion of any warranty or guarantee. The information on the technical data comes from the original offer. No liability is assumed for printing and measurement errors. In case of doubt, please compare the information with the provided photos or inspect the goods on site before the end of the auction.

Condition: like new (used), Year of construction: 2023, machine/vehicle number: IV68/ IV78 /V88, functionality: fully functional, operating hours: 30 h, Professional Cutter Set for Spindle Moulder / Edger – Double-glazed Timber Frame, Like New For sale: complete set of interchangeable carbide cutters from Lehmann – Caul (Tool Experience), used only 3 times for manufacturing IV68 timber frames. This lot includes a full range of carpentry tools suitable for profiling and machining double-glazed timber frames: ✔ Opening cutters (A1, A2, A3, A4, A8, A9, A10) ✔ Fixed frame cutters (B1, B2, B3, B5, B6, B8, B10) ✔ Complementary/Counter-profile cutters (C1, C2, C4, C5, C8) ✔ Special tooling (e.g. D4) ✔ Professional-grade reversible carbide knives ✔ Several reducing rings All tools are fully compatible and modular—no missing parts for standard timber frame manufacturing. New value: €15,340 (with invoice) — 🔹 Condition: Excellent / barely used 🔹 Bore: 60 mm (majority of cutters) 🔹 Diameters: from 197 mm to 353 mm depending on model 🔹 Suitable for industrial spindle moulders, production optimized Kjdsx Dmgijpfx Afdjnb Why this is an opportunity: ✨ Complete ready-to-use set ✨ Condition like new ✨ Perfect for professional joiners or manufacturers ✨ Immediate productivity boost ✨ High new purchase value — Who is this for: ✔ Timber joiners ✔ Door and window manufacturing workshops ✔ SMEs or craftsmen seeking a professional-grade set ✔ High-end tool collection Further information: 📍 Collection in person possible 📦 Professionally packed for shipping 📸 Detailed photos available on request

Condition: used, Year of construction: 2015, Cutting and machining center, FTB 100 A2 2S3 NFZ Feed direction from right to left Windows 10 min. cutting length (PVC only): 296 mm min. part length (PVC with steel): 300 mm max. part length (PVC with steel): 4,000 mm max. profile depth: 130 mm max. profile height: 130 mm Automatic feeder magazine for manual loading, for 12 profiles with a min. length of 600 mm and a max. length of 6,500 mm: 8 axes - CNC - machining station A2 - 3 CNC axes X, Y, Z - one 2-way spindle each, 0.75 kW 2 S 3 – Sawing station - 1x stepless swivel range of the saw from 45° - 135° - Saw motor 2.2 kW + 3,000 rpm - Saw blade Ø 550 mm - 1x saw 45° - Saw motor 2.2 kW + 3,000 rpm - Saw blade Ø 550 mm CNC - 3 axes – Milling station for end machining of profiles: - with automatic tool changer for 16 tools Cross conveyor with buffer function CNC - 3 axes – Milling station for end machining of profiles: - with automatic tool changer for 16 tools TFT screen for steel length display - 12" TFT screen for displaying the steel lengths for manual steel insertion and insertion depth. Label thermal printer PF4i with LAN - with network connection for manual application of labels Laser e-SolarMark 30W - CO2 laser, 30 W power - 230V 50Hz / 115V 60Hz, 1PH, 700W ASE 100 S steel cutting and insertion - with feeder magazine with 12 slots Control panel steel profile loading ASE 100 - 15-inch TFT display touchscreen Double screw unit from above and below - automatic distance adjustment between the two screw units, motorized, screw spacing: min 155 mm / max. 500 mm Double dowel hole drilling station Ø 6mm and Ø 10 mm - with automatic adjustment to different profile types with 8 lateral positioning points 3-axis - CNC - machining station S, type L - one 3-axis tool carrier (twin module) for up to 18 machining units, equipped on both sides One locking component insertion station for a standard locking component for frame profiles - with vibrating hopper, bunker and locking component singulation - positioning for attaching the locking components Locking component insertion station via bar magazine - One locking component insertion station for a locking component for frame profiles and mullions/transoms, on one side. 2x screw unit for locking component inserter Knjdozm Hr Rjpfx Afdjb - automatic single screw unit for locking component insertion stations, positionable in the y-axis Cross conveyor magazine - for transporting the profiles for stacking Stacking and sorting unit, 3 axes - one stacking and sorting unit in a 3-axis design Carriage change station - one carriage change station for positioning two carrier carriages in the profile stacking position. Plant capacity: approx. 270 frame units in 7.5 hours with 85% availability approx. 130 mullions, posts, uprights with the following machining operations: Frame approx. 1200 x 1200 mm: 4 x cutting 2 drainage slots, rebate bottom 2 drainage slots outside/bottom 2 ventilation slots, rebate top Screws 4x/part 6-8 x standard locking component insertion for window 8 x sealing groove milling 2-3 x dowel holes vertical bars for window

Condition: used, Year of construction: 2023, operating hours: 120 h, Almost like new, a Haas TRT210 two-axis rotary table with only approximately 120 operating hours. The table was used exclusively on a Haas VF-4 (see separate listing) and is in flawless optical and technical condition. The TRT210 is Haas’s compact 5-axis solution for medium-sized VMCs, and it takes up minimal space by being mounted at one end of the machine table – the rest of the mounting surface remains free for vises or other fixtures. Plug-and-play connection to any Haas milling machine with 4/5-axis drives and the corresponding NGC control software. In addition to the rotary table itself, the scope of supply includes the matching toe clamp kit for direct mounting on the machine table, as well as a Renishaw riser block for side mounting of the radio receiver (OMI/OMP) – this ensures reliable signal transmission to the measuring probe even over the full A-axis swivel range. Inspection possible by appointment. Shipping can be arranged. Technical data: - Table diameter: 230 mm (9.10") - Max. pitch circle: 368 mm (14.5") Kedpfx Afjy Tp Hgjdonb - Max. workpiece weight on table: up to approx. 90 kg - Hole pattern: 2× 6-hole pattern A-axis (swiveling): - Swivel range: ±120° - Max. speed: 80°/s - Max. torque: approx. 407 Nm (300 ft-lb) - Braking torque at 6.9 bar: approx. 540 Nm - Accuracy: ±25 arc-sec - Repeatability: 10 arc-sec - Resolution: 0.001° B-axis (rotating): - Rotation range: 360°/continuous - Max. speed: 100°/s - Max. torque: approx. 285 Nm (210 ft-lb) - Braking torque at 6.9 bar: approx. 270 Nm - Maximum runout: 0.013 mm (0.0005") - Accuracy: ±15 arc-sec - Repeatability: 10 arc-sec - Resolution: 0.001° General: - Connection voltage: 115 VAC, approx. 15 A - Compressed air max.: approx. 10 bar (150 psi) - Weight: approx. 220 kg Scope of supply: - Haas TRT210 rotary table complete - Original Haas servo connection cable for A and B axes - Toe clamp kit (for mounting on the machine table) - Renishaw riser block for side receiver mounting - Original documentation

Condition: used, Year of construction: 2004, functionality: fully functional, machine/vehicle number: Custom made, type of input current: three-phase, total width: 1,800 mm, total length: 14,650 mm, input voltage: 400 V, input current: 16 A, cutting width (max.): 1,800 mm, 22 C – Finn-Convey Industrial Spreading Line (14.65 m x 1.8 m) – Complete with Air-Flotation Description For sale is a professional-grade Finn-Convey industrial fabric spreading and cutting table line, offered as a complete production-ready system. This system is designed for efficient fabric spreading and preparation in high-volume cutting room operations. It enables controlled handling of heavy fabric rolls, precise layer alignment, and smooth material flow prior to cutting. The line has been operated as part of a dedicated production setup together with a Bergman cross cutting saw (unit 114 A). This combination allows efficient pre-cutting of fabric rolls into required lengths before spreading, significantly improving workflow efficiency and reducing manual handling. The equipment has been used in a professional garment factory and was operational prior to factory shutdown. Key Technical Specifications • Total length: 14.65 meters (modular structure, adjustable configuration) • Table width: 1.80 meters (suitable for wide fabrics) • Technology: Air-flotation table system for low-friction material handling • Drive system: Motorized side drive units ensuring controlled spreading tension System Components • Finn-Convey motorized side drive units • Industrial air-flotation table structure with perforated surface • Integrated blower system with centrifugal fans under tables • Electrical control cabinet for system operation • Fabric roll handling stands and support assemblies • Integrated end cutting unit with circular blade system Cutting Unit Technical Details • AC speed-controlled motor (Taili Motor Co., Ltd., approx. 90–200W range)14650 • Gear reduction unit (e.g. 5GN-series) for high torque output • Circular cutting blade with integrated sharpening mechanism • Adjustable vertical guide rails for cutting height positioning • Designed for efficient cutting of multi-layer fabric stacks Auxiliary Drive Components • Auxiliary induction motor (e.g. 40W class, speed-controlled) for fine positioning and movement control • Gear-driven transmission for stable and continuous operation • External capacitor-based start system (typical for single-phase auxiliary motors) System Architecture • Modular table construction allowing flexible layout adjustments • Air-assisted material movement reducing friction and operator effort • Cradle-type roll handling enabling tension-free fabric feeding • Encoder-based or mechanical length control depending on configuration • Compatible with upstream roll cutting equipment and manual or semi-automatic workflows Production Advantages • High efficiency with long cutting layouts and reduced material waste • Excellent ergonomics, heavy fabric stacks can be moved with minimal force • Accurate layer alignment supported by controlled drive system • Integrated cutting capability improves workflow continuity • Suitable for a wide range of materials including denim, upholstery, and technical textiles Condition Used industrial condition Removed directly from production after factory shutdown Typical signs of use from industrial environment Inspection possible prior to dismantling Sold as-is, where-is, without warranty Location Valga, Estonia Removal & Transport Buyer responsible for dismantling, loading, and transport Professional dismantling strongly recommended due to system size and electrical installation Knsdpfjy Au Alox Afdeb

Condition: used, Year of construction: 1981, functionality: fully functional, machine/vehicle number: 110001, For sale: SACEM drilling and milling machine for machining large parts. The machine is fully functional and is currently used in production – primarily for finishing operations. The machine is particularly suitable for machining large, unwieldy parts. Weight: 10 t Voltage: 380 V, 50 Hz Connected load: 20 kW Compressed air: 3.5 - 6 bar Spindle speed: 4 - 1600 rpm Feed rate: 3 - 2500 mm/min Tool holder: SK40 Drilling depth / spindle travel: 800 mm Travel ranges: x: 900 mm y: 900 mm Kodpfoxbn A Tox Afdenb z: 1200 mm Clamping area: 1000 x 1200 mm Max. workpiece weight: 4000 kg Accuracy: 0.02 mm Please note: The machine has already been disassembled and is ready for loading onto a truck in an open area. Various tool holders and clamping devices are included as accessories. If you are interested, we can send you photos. Important conditions: Please note that the sale of this machine is only possible under the following conditions: • Sale exclusively to end users / manufacturing companies (no resale to dealers) – corresponding company profile required. • Sale only within Germany or the EU. Sales / transfer conditions: • Disassembly, removal, and transport are the responsibility and at the risk of the buyer. • The buyer is responsible for personnel, tools, and transport equipment. The personnel must only work with appropriate personal protective equipment, and only trained personnel may be used. If you are interested, we look forward to your reply so that we can discuss the further details directly.