Used Engel Victory for sale (217)

Condition: excellent (used), ENGEL e-cap 3440/420 T injection molding machine Basic data • Manufacturer: ENGEL • Model: e-cap 3440/420 T • Year of manufacture: 2012 • Machine type: Fully electric injection molding machine • Control system: ENGEL CC200 • Operating hours: 63,000 h • Screw diameter: 80 mm Technical data Clamping unit • Clamping force: 4,200 kN (420 tons) • Clamping mechanism: Kneel-type, fully electric • Opening stroke: 700 mm • Minimum mold height: 350 mm • Maximum mold height: 750 mm • Mounting plate dimensions: 1350 × 1350 mm • Column spacing: 920 × 920 mm • Ejector stroke: 220 mm • Ejector force: 120 kN • Maximum mold weight: 6200 kg Injection unit • Unit size: 3440 • Screw diameter: 80 mm • Injection volume: 1709 cm³ • Maximum injection pressure: 1950 bar • Number of heating zones: 6 Equipment • ENGEL CC200 control system • Fully electric drives for all axes • Energy-efficient ENGEL e-cap technology • Very high precision and process repeatability • Suitable for continuous 24/7 operation Machine history The machine has been used since new for the production of plastic buckets. It has never been used for the production of PET caps, although the e-cap series was designed specifically for this type of application. The average cycle time was approximately 15 seconds. As a result, the clamping unit has performed significantly fewer operating cycles than typical e-cap machines used for cap production, where the cycle time is usually below 2–4 seconds. This potentially indicates lower mechanical wear compared to machines operated according to their original intended purpose. Bwodpfxjzlgi He Amfew

Condition: excellent (used), Year of construction: 1995, Engel ES 650/100HL Bwodpfxoxu Ri Aj Amfjw Clamping force 100 t Year of manufacture 1995 Screw diameter 45 mm EC 88 Platen dimensions HxW 740 x 520 mm

Condition: ready for operation (used), Year of construction: 2013, operating hours: 60,672 h, clamping force: 4,000 kN, screw diameter: 80 mm, total height: 2,360 mm, overall weight: 11,000 kg, product length (max.): 7,420 mm, This Engel DUO 3550/400 pico was manufactured in 2013. It features a clamping force of 4,000 kN, a screw diameter of 80 mm, and a maximum injection volume of 1,960 cm³. The machine dimensions are 7,420 × 2,360 × 2,360 mm, and it weighs 11,000 kg. It is equipped with a robot interface Euromap 67. Contact us for more information about this machine. • Operating hours: 60,672 h • Condition: Excellent • Status: In production • Maximum injection volume: 1,960 cm³ • Minimum mould height: 350 mm • Maximum mould height: 850 mm • Platen opening stroke: 1,050 mm • Platen dimensions (W × L): 1,100 × 1,190 mm • Tie-bar distance: 800 × 800 mm • Motor power: 70 kW • Heater power: 52.95 kW • Number of electrical connection pins: 32 • Injection nozzle radius (tip): R35 Bwjdpsx Nr Ryjfx Amfow • Centering ring diameter: 200 mm • Number of Hydraulic Cores (FS/MS): 1 fixed side and 2 moving side • Number of Hydraulic Cascades: 0 • Number of Hot Runner Control Points: 8 • Number of heating zones: 0 Additional equipment • Robot equipped: Yes • Robot interface: Euromap 67

Condition: excellent (used), Year of construction: 2016, Conveyor belts Engel Year of manufacture approx. 2016 Length: 2.6 meters Width: 0.90 meters Bsdpfx Aji Hc E Nomfoww Height: 1.0 meter

Condition: excellent (used), Year of construction: 2014, For sale: Screw and barrel for Engel 750 injection unit. Screw Diam. 60 mm Bwodpfx Amsiw Dt Dofjw

Condition: excellent (used), ROTARY TABLE D1100 2STAT – with VC400 rotary unit Additional specifications: Max. load: 2.5 t The weight of the rotary unit, including the hydraulic manifold, is approx. 2,000 kg. Bwsdpfjz Rxf Ajx Amfew

Condition: excellent (used), Year of construction: 2000, Engel ES 330H80V/125HL .2F Year of manufacture: 2000 Closing force: 125 tons Multi-component injection molding machine Bwodpsigrinefx Amfew Control system: CC100 Cylinder H: 35 Cylinder V: 18 1x Hydraulic core pull unit, BAP 1x Proportional hydraulic indexing plate connection, BAP 16x Hot runner zones 2x Magnetic clamping plates for BAP and FAP

Condition: ready for operation (used), Year of construction: 2001, Engel ES 200/75 HL Closing 75 tons Year 2001 Bjdpfovzhmijx Amfjww Scrow 35 mm

Condition: excellent (used), Year of construction: 1999, Engel ES 80/20 HL Clamping force: 20 tons Bwjdpfx Ajlq Hyqsmfew Year of manufacture: 1999 Screw diameter: 22 mm Displacement: 38 cm³ Enlarged clamping plate 550 x 430

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, clamping force: 2,942 kN, screw diameter: 70 mm, displacement volume: 1,039 cm³, No minimum price – guaranteed sale to the highest bidder! Engel injection moulding machine including robot! Bedpfxoy Ew U Aj Amfjww TECHNICAL DETAILS Clamping force: 300 tons Screw diameter: 70 mm Max. shot volume: 1,039 cm³ EQUIPMENT 3x core pulls Robot Note: When purchasing multiple items from the same location (see offers below), the respective lower costs for dismantling and loading will be waived.

Condition: ready for operation (used), Year of construction: 1986, Engel ES 80/35 ST Closing 35 tons Year 1986 Bwjdpfx Ajtwmv Somfow Scrow 22mm EC 88

Condition: excellent (used), Year of construction: 1999, Angel ES 750/150 HL Year 1999 Closing 150 tons Scrow 50 mm Injection weight: 353 g Enlarged clamping plate Bodpfx Aevhcc Somfeww 820x750 mm

Condition: excellent (used), Year of construction: 1998, Angel ES 330/80 HLS Closing 80 tons Year 1998 Bodepdr Aiopfx Amfoww Scrow 35 mm Stroke volume 154 cm3 Enlarged clamping plate 660x560 Mould height min 200 mm

Condition: ready for operation (used), Year of construction: 1998, Engel ES 330/80 HL .ST Closing 80 tons Year 1998 Bwjdpfx Amovcrqnjfsw Scrow 35 mm Spray softened 140 g

Condition: ready for operation (used), Year of construction: 2004, operating hours: 70,029 h, functionality: fully functional, machine/vehicle number: 51561, clamping force: 2,300 kN, screw diameter: 135 mm, injection pressure: 1,600 bar, opening stroke: 3,800 mm, tool height: 1,890 mm, TECHNICAL DETAILS Clamping force: 2,300 kN Platen size (H x V): 2,900 x 2,500 mm Tie bar distance (H x V): 2,000 x 1,600 mm Minimum/maximum mould height: 700 mm/1,890 mm Maximum opening stroke: 3,800 mm INJECTION UNIT Screw diameter: 135 mm Shot volume: 8,870 cm³ Shot weight (PS): 8,071 g Injection pressure: 1,600 bar Bwsdpsy T Hx Hsfx Amfsw MACHINE DETAILS Net weight (with control cabinet): 113 t + 18 t Operating hours: 70,029 h

Condition: as good as new (ex-display), Engel Robot Drive, Robot Drive Module, Servo Drive Controller, Used Machine Manufacturer: Sigmatek (Engel) Model: Robotdrive M3-1 Year of Manufacture: 2018 Nominal Input Power: 4 kW Communication Interface: EtherCAT (high-speed industrial fieldbus system) Mains Input: 3 × 380–480 V AC, 50/60 Hz Output Voltage: 560 VAC Output Frequency: 0–8000 Hz Nominal Output Current per Axis (at 45 °C): Axis 1: 5 / 10 A Bwodpfx Aszmyrwomfjw Axis 2: 10 / 20 A Axis 3: 10 / 20 A Overall Dimensions: Width: 390 mm Depth: 210 mm Height: 190 mm

Condition: used, Year of construction: 2001, Technical details: Bwjdetuncvopfx Amfjw screw size: 105 mm injection shot weight in Polysterol: 4.940 g/PS closing pressure: 9000 kN weight of the machine ca.: 19 t Out of serial production Machine and Robot condition regularly checked by EngelCare program Linear robot on machine was fully refurbished in 2021 *

Condition: ready for operation (used), Year of construction: 2013, operating hours: 65,000 h, clamping force: 5,000 kN, screw diameter: 90 mm, total height: 2,355 mm, overall weight: 14,000 kg, product length (max.): 7,800 mm, This Engel DUO 4550/500 pico was manufactured in 2013. It features a clamping force of 5,000 kN, a screw diameter of 90 mm, and a maximum injection volume of 2,480 cm³. The machine dimensions are 7,800 x 2,405 x 2,355 mm, and it weighs 14,000 kg. Currently in production with approximately 65,000 operating hours, it remains in excellent condition. Contact us for more information about this machine. Bwsdpfx Amjx Nr Uxsfsw • Maximum injection volume: 2,480 cm³ • Minimum mold height: 350 mm • Maximum mold height: 900 mm • Platen opening stroke: 1,300 mm • Platen dimensions (W x L): 1,270 x 1,260 mm • Tie-bar distance (H x V): 910 x 830 mm • Motor power: 83 kW • Heater power: 61.2 kW • Number of electrical connection pins: 32 • Injection nozzle radius (tip): R35 • Centering ring diameter: 200 mm • Robot interface: Euromap 67 • Number of cores: 0 • Number of heating zones: 0 • Operating hours: approx. 65,000 h • Condition: Excellent • Status: In production Additional equipment • Robot (equipped)

Condition: ready for operation (used), Year of construction: 1999, Engel ES 200/60HL ST Closing 60 TO Year 1999 Scrow 30 mm Enlarged clamping plate 660x560 Bjdpfx Amovlangjfjww

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, clamping force: 2,451 kN, screw diameter: 55 mm, injection weight: 618 g, No minimum price - guaranteed sale to the highest bidder!\n\nENGEL injection moulding machine with E-PIC Z robot!\n\nTECHNICAL DETAILS\nClamping force: 250 tons\nScrew diameter: 55 mm\nShot weight: 618 g\n\nMACHINE DETAILS\nMounting plate: 1,050 mm x 900 mm\n\nEQUIPMENT\nEngel E-PIC Z robot (year 2017)\nEnlarged mounting plate\n3x tie bars\n3x air valves\n\nNote: When purchasing multiple items from the same location (see offers below), you will be charged the more favourable costs for dismantling and loading. Bjdpjy Ewgfefx Amfsww

Condition: excellent (used), Year of construction: 2000, Engel ES 500/125 HL Clamping Force 125 tons Year of manufacture: 2000 Screw diameter: 45 mm Injection volume: 318 cm³ Bwjdpfx Aeh R T Sljmfjw

Condition: ready for operation (used), Year of construction: 1999, clamping force: 1,100 kN, screw diameter: 150 mm, total width: 1,400 mm, total height: 1,150 mm, overall weight: 77,000 kg, Hydraulic injection moulding machine manufactured in 1999. This Engel ES 16050/1100 DUO features a clamping force of 1100 T and a screw diameter of 150 mm. It has an opening stroke of 1800 mm and a total weight of 77,000 kg. If you are looking to get high-quality injection moulding capabilities, consider the Engel ES 16050/1100 DUO machine we have for sale. Contact us for further details. • Working hours: 86,200 h • Column diameter: 230 mm • Displacement: 10,955 cm³ • Injection pressure: 1330 bar Bedpjyuc Urofx Amfeww • Ejection force: 215 N • Opening stroke: 1800 mm • Heating capacity: 113 kW (153.64 hp)

Condition: good (used), Year of construction: 1996, Engel ES 330H200V/125 HL – 2F Clamping force: 125 tons Tie bar diameter: 35 mm Bsdpolu Hkiefx Amfjww Tie bar diameter: 30 mm Injection volume: 158 cm³ 98 cm³ Year of manufacture: 1996 Enlarged clamping plate: 740 x 700 Minimum tool installation height: 350 mm Plus rotary platen

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, clamping force: 2,942 kN, screw diameter: 55 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Bjdpfjy Ewp Hox Amfoww Screw diameter: 55 mm Clamping force: 300 tons Note: When purchasing multiple items from the same location (see offers below), you will benefit from waived lower costs for dismantling and loading.

Year of construction: 1990, condition: used, Electric cards for Engel machines Bedpfx Amexr U Dfsfeww