Used Envelope Feeder for sale (2,571)

Condition: excellent (used), machine/vehicle number: CUTSTAR74/274, type of input current: three-phase, input voltage: 400 V, For sale: Heidelberg CutStar XL 75, an industrial roll-to-sheet feeding and cutting system designed for integration with Heidelberg Speedmaster XL 75 sheetfed offset printing presses. The CutStar system enables printing materials to be fed directly from rolls, automatically cut into individual sheets, and transferred to the printing press. This solution allows printing companies to use roll-fed materials in sheetfed offset production, helping to optimize material costs and improve production efficiency. The system is offered together with a Corona Plasma Plus surface treatment unit. Technical Specifications * Manufacturer: Heidelberg / Bielomatik Leuze GmbH + Co. KG * Model: CutStar XL 75 * Machine type: Roll-to-sheet feeder and cutter * Year of manufacture: 2011 * Serial number: CUTSTAR74/274 * Power supply: 3 × 400 V * Frequency: 50 Hz * Rated current: 52 A * Connected load: 40 kVA * Supply fuse protection: 100 A * Control voltage: AC 230 V / DC 24 V Included Equipment * Heidelberg CutStar XL 75 roll-to-sheet feeding and cutting system * Corona Plasma Plus surface treatment unit * Electrical control cabinets * Associated components and accessories shown in the photographs Operating History and Condition The system was previously installed on a Heidelberg Speedmaster XL 75 printing press with over 200 million impressions. The equipment was fully operational and in very good technical condition before dismantling. The entire system was professionally dismantled by Heidelberg Polska technicians, ensuring proper disassembly and preparation for transportation. The equipment is currently dismantled, secured, and stored in our warehouse on transport pallets. Bdedpfx Ansz Ny A Hjdoi Due to its dismantled condition, a live operational demonstration is not currently possible. Additional photographs and technical information can be provided upon request.

Condition: good (used), Year of construction: 2003, functionality: fully functional, machine/vehicle number: 13-230022, Technical characteristics: Core Specifications - Bar Diameter (Round): 6 mm – 50 mm - Bar Diameter (Hexagonal): 6 mm – 45 mm - Bar Diameter (Square): 6 mm – 37 mm - Bar Length Options: 1200 mm – 3200 mm - Max Feed Speed: 30 m/min - Max Remnant Length: 300 mm - Air Pressure Required: 6.5 – 7.5 bar - Operating Voltage: 230V / 50 Hz - Weight: 1200 kg Design & Features - Guide Channel: Manually interchangeable channels, made from Vulkollan-type plastic for high-speed bar rotation. - Front Steady Block: Interchangeable in 5 mm increments for optimal bar support. - Remnant Management: Allows rear extraction via self-centering extractor or front ejection. - Repositioning System: Optional rail system enables axial or radial displacement of up to 600 mm for lathe maintenance. - Automation: Fully PLC-controlled with brushless motor and digital pneumatic valves for precise speed and thrust adjustment. Bsdpfx Asxx Sawsndjdi - Bar Storage: Single-level magazine with 235 mm capacity. # Bar Feeder: FMB Turbo 10-72 XT # AUTOMATIC BAR LOADER FOR LATHES Dimensions - Bar feeder (L×W×H): 3500 × 800 × 1200 mm - Weight: 1200 kg Main Features and Capabilities: - HMI DIGITAL CONTROLLER FOR MANUAL OPERATIONS Machine Status: WORKING

Condition: used, all stainless steel nett width 430 mm motor type JVM MS 6-50 Hz 380-440 V / 9,5 A/ 50 Hz Grill opening: dia. 8 mm dimensions (L x W x H) : ± 2.600 x 750 x 700 mm Bdedps Ahg Tqsfx Andsi

Condition: new, functionality: fully functional, fuel type: electric, Year of construction: 2026, The bunker of the PRO-150 Mobile crushers has been developed by our engineers as user-oriented to operate with high-level efficiency. The vibration speed of the vibrating feeding bunker is easily guided by the automation system which can be adjusted manually. This feature prevents the bunker from wearing out and provides the user with longer and more efficient usage. In order to avoid any performance loss due to the damp or muddy material processed in the crusher plants, the wobbler feeder contains all the necessary qualities. While the wobbler feeder has potential to process without any problems for many years. Aslo stands out with easy maintenance feature as well. The poor quality of material separated in the wobbler feeder is thrown into the bypass belt and therefore user get a high-quality final product. Additionally; if desires, the materials falling into the bypass can be sent directly to the screen thanks to the reversible conveyor in the bypass system under the wobbler feeder. FABO primary impact crushers are designed to crush soft and medium hard stones with high rotor speed. It is considered as the heart of the mobile system. With the help of high-speed rotating rotor crushing hammers, the products poured from the feeder are crushed with the help of pallets. Hydraulically adjustable rods allow the products to be obtained in the desired size. FABO folding type hydraulic belts send the right product to the crusher and the stock area according to customer requests after sorting through the vibrating screen. Bedpfe Adr Rwsx Andedi With foldable structure, the plant minimizes dimensions of the machine for the transportation. The number of stock belts can change due to customer requests. 10 mm EP 125 4-ply belt elastics moving on twisted sheets perfectly transport the aggregate coming out of the screen to the area desired by the user. Belt elasticity, which produced resistant to wear, offers many years of life without letting customer down. The flap system is a special system that allows the directly crushed material to be taken from the crusher with the help of the pre-stock belt without being screened in the mesh. The plant minimizes production time with its unique location just in front of the screen.

Condition: good (used), Year of construction: 2017, functionality: fully functional, machine/vehicle number: BF17034613, Technical characteristics: Core Specifications: - Bar Diameter (Round): 6 mm – 50 mm - Bar Diameter (Hexagonal): 6 mm – 45 mm Bjdpfxjxx Sclo Andsdi - Bar Diameter (Square): 6 mm – 37 mm - Bar Length Options: 1200 mm – 3200 mm - Max. Feed Speed: 30 m/min - Max. Remnant Length: 300 mm - Required Air Pressure: 6.5 – 7.5 bar - Operating Voltage: 230V / 50 Hz - Weight: 1200 kg Design & Features: - Guide Channel: Manually interchangeable, made from Vulkollan-type plastic for high-speed bar rotation. - Front Steady Block: Interchangeable every 5 mm for optimal bar support. - Remnant Management: Rear extraction with self-centering extractor or front ejection. - Repositioning System: Optional rail allows axial or radial displacement up to 600 mm for lathe access. - Automation: Fully PLC controlled, with brushless motor and digital pneumatic valves for speed and thrust control. - Bar Storage: Single-level magazine, 235 mm capacity. Bar feeder details: TOP Automazione model: FU 352 Semi-automatic Bar Feeder for Horizontal Loading to Lathe (Autonomy depends on bar diameter) Dimensions: Bar feeder (L×W×H): 3500 × 800 × 1200 mm; Weight: 1200 kg Main Features and Capabilities: - Digital HMI controller for manual operations Machine status: - In working condition

Condition: good (used), Year of construction: 2017, functionality: fully functional, machine/vehicle number: BF17034612, Technical characteristics: Core Specifications Bar Diameter (Round): 6 mm – 50 mm Bar Diameter (Hexagonal): 6 mm – 45 mm Bar Diameter (Square): 6 mm – 37 mm Bar Length Options: 1200 mm – 3200 mm Maximum Feed Speed: 30 m/min Maximum Remnant Length: 300 mm Required Air Pressure: 6.5 – 7.5 bar Operating Voltage: 230V / 50 Hz Bdodpfxoxx Sfaj Andji Weight: 1200 kg Design & Features Guide Channel: Manually interchangeable, made of Vulkollan-type plastic, suitable for high-speed bar rotation. Front Steady Block: Interchangeable every 5 mm for optimal bar support. Remnant Management: Rear extraction via self-centering extractor or front ejection available. Repositioning System: An optional rail system enables axial or radial displacement up to 600 mm for lathe servicing. Automation: Fully PLC-controlled, equipped with a brushless motor and digital pneumatic valves for speed and thrust control. Bar Storage: Single-level magazine with a 235 mm loading capacity. Bar Feeder: TOP Automazione Model FU 352 SX SEMI-AUTOMATIC BAR FEEDER FOR HORIZONTAL LOADING TO LATHE (AUTONOMY DEPENDS ON BAR DIAMETER) Dimensions Bar Feeder (L×W×H): 3500 × 800 × 1200 mm; Weight: 1200 kg Main Features and Capabilities: DIGITAL HMI CONTROLLER FOR MANUAL OPERATIONS Machine Status: OPERATING

Condition: used, Year of construction: 2005, machine/vehicle number: IntNr231496, For sale is a CNC multi-slide turning center ERGOMAT TBA-60, equipped with a single bar feeder. Technical data Type: TBA-60 Year of construction: 2005 Machine type: CNC multi-slide turning center Control: CNC (Fanuc-based control) Working area Max. bar diameter: 60 mm Max. turning length: 100 mm Spindle Spindle power: 7.5 kW Max. spindle speed: up to 3,150 rpm Tool system Servo-driven 6-position star turret Turret indexing time: approx. 0.3–0.4 s Multi-slide concept with: Front horizontal slide (X1/Z1) Rear horizontal slide (X2) Two vertical slides (X3/X4) Travel distances Travel distance of horizontal slides: 45 mm Travel distance of vertical slides: 45 mm Machine data Machine weight: 2,000 kg Bdodo Ahfa Ijpfx Andji Equipment Single bar feeder Multi-slide turning system for high productivity Coolant system Chip disposal / chip tray The machine can be inspected while running by prior arrangement. Subject to changes and errors in the technical data and specifications, as well as prior sale!

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, LNS Sprint 552 - Bar Feeder Bdjdsz Truispfx Andoi - Bar diameter: 5 - 52 mm - Bar length: 3200 mm - Loading capacity: 11, 9, or 8 bars - Additional accessories and sleeves

Condition: used, Year of construction: 2003, functionality: fully functional, machine/vehicle number: 13-230021, Technical characteristics: Core Specifications: - Bar Diameter (Round): 6 mm – 50 mm - Bar Diameter (Hexagonal): 6 mm – 45 mm - Bar Diameter (Square): 6 mm – 37 mm - Bar Length Options: 1200 mm – 3200 mm - Max Feed Speed: 30 m/min - Max Remnant Length: 300 mm - Required Air Pressure: 6.5 – 7.5 bar - Operating Voltage: 230V / 50 Hz - Weight: 1200 kg Design & Features: - Guide Channel: Manually interchangeable, manufactured from Vulkollan-type plastic for optimal bar rotation at high speeds. - Front Steady Block: Interchangeable in 5 mm increments for precise bar support. - Remnant Management: Supports rear extraction via self-centering extractor or front ejection. Bdjdsxx R S Eepfx Andji - Repositioning System: Optional rail system enabling axial or radial displacement up to 600 mm for lathe servicing. - Automation: Complete PLC control with brushless motor and digital pneumatic valves for feed speed and thrust regulation. - Bar Magazine: Single-row magazine with a 235 mm load capacity. # Bar feeder: FMB Turbo 10-72 XT # AUTOMATIC BAR LOADER FOR LATHES Dimensions: - Bar feeder (L×W×H): 3500 × 800 × 1200 mm - Weight: 1500 kg Main Features and Capabilities: - HMI digital controller for manual operation Machine status: WORKING

Condition: excellent (used), Year of construction: 1974, Catalog number: 7685 TECHNICAL DATA - inlet width: 440mm - inlet height: 300mm - shaft width: 480mm - shaft diameter: 440mm - number of knives: 2 pcs - screen dimensions: 50x50mm - toothed drive shaft, top and bottom - shaft motor: 0.78/1.1kW - electric auto-reverse (with adjustable speed) - with conveyor belt - length of feed belt: 4006mm - width of feed belt: 380mm - belt feed direction: forward/reverse - main motor: 30kW - dimensions (L/W/H): 6100x1100x1100mm - weight: approximately 2000kg ADVANTAGES - German-made - with conveyor belt Bdsdpfx Ane Aggbqedsi - auto-reverse - used shredder, very good condition Net price: 76,900 PLN Net price: 17,880 EUR, depending on the exchange rate of 4.3 EUR (Prices are subject to change due to significant exchange rate fluctuations)

Condition: good (used), functionality: fully functional, units span 1350mm two motors 5,5kW Bdsdpfxozz Nize Andoi feeding from magazine hydraulic feeder manual regulation of top pressure

Condition: new, Year of construction: 2026, overall weight: 50 kg, total height: 1,100 mm, total width: 550 mm, total length: 850 mm, Double-Screw Dosing Feeder Industrial Twin-Screw Volumetric Feeder for Controlled Material Dosing The Double-Screw Dosing Feeder is designed for controlled and uniform feeding of polymer raw materials into an extruder. Its primary function is to deliver material in accurately controlled volumes, ensuring consistent and stable feeding during the extrusion process. The feeding system consists of a stainless steel hopper, two feeding screws, and a gear motor. The rotating screws transport measured volumes of material from the hopper to the extruder inlet, providing continuous and controlled material dosing. The feeder can be integrated into various extrusion systems where precise volumetric material feeding is required. 1. Technical Specifications • Type: Double-Screw Volumetric Feeder • Application: Controlled material dosing into extruders • Feeding Capacity: 150 kg / 200 kg/h • Number of Screws: 2 • Screw Diameter: 45 mm each / 50 mm each • Motor Power: 0.75 kW / 1.1 kW • Ratio 43:1 / 35:1 • Hopper Capacity: 120 L (0.1 m³) • Hopper Material: Stainless steel • Dimensions (L × W × H): 850 × 550 × 1100 mm / 960 × 700 × 1200 mm • Weight: 50 kg / 60 kg Actual feeding capacity depends on the material properties and operating conditions. 2. Dosing System The feeder uses two rotating screws to deliver controlled volumes of polymer material from the hopper to the extruder. The double-screw mechanism provides uniform material feeding and helps maintain a consistent material supply during extrusion. The 150-liter stainless steel hopper provides temporary material storage before dosing. 3. Main Features • Double-screw volumetric dosing system • Uniform and controlled material feeding • Two feeding screws, Ø45 mm each • Stainless steel feeding hopper • Gear motor drive • Continuous material supply to the extruder • Suitable for integration into extrusion lines 4. Applications The Double-Screw Dosing Feeder is suitable for: Bdsdpfx Ane Ag Tdvjdsi • Plastic extrusion lines • Controlled feeding of polymer raw materials • Volumetric material dosing • Continuous material supply to extruders • Integration into industrial extrusion systems

Condition: excellent (used), Catalog number: 7502 TECHNICAL DATA Infeed carriage DTBC-P Wheelbase 750mm Diameter of the infeed material 100-800mm Total side travel 160mm Log rotation to the left and right 360 degrees Forward and reverse travel speed variable Hydraulic pump motor power 5.5kW Auxiliary carriage DTCB Wheelbase 750mm Side travel range 160mm Log rotation to the left and right 360 degrees Side travel motor power 1.1kW Infeed carriage dimensions (L/W/H) 2850/1400/1500mm Auxiliary carriage dimensions (L/W/H) 950/650/750mm Total weight 1450kg ADVANTAGES – Made in Poland – Robust construction – Includes cables and chains – Used machine, very good condition, after a major overhaul (invoice available for inspection) PRODUCT FEATURES The auxiliary carriage is designed to support logs or stacks from the infeed side of the saw, with a diameter range of 100 mm to 750 mm. Bjdpfx Ao Af Uyvendjdi The infeed carriage is designed to feed logs and stacks to the saws, with a diameter range of 100 mm to 750 mm. The device for manipulating logs, namely for clamping the log in the clamps, performing transverse movement, and rotating the log, is powered by hydraulic drives. Net price: 59900 PLN Net price: 13930 EUR, depending on the exchange rate of 4.30 EUR (Prices are subject to change due to significant fluctuations) * MAR-MASZ guarantees the quality of your purchase, but is not an authorized representative of the manufacturer. All trademarks and names are used for informational purposes only, to identify the product. We only resell products that the manufacturer has previously introduced to the market. We have no business ties with the manufacturer.

Condition: used, Year of construction: 2015, functionality: fully functional, machine/vehicle number: BF15063530, Technical Characteristics: Core Specifications - Bar Diameter (Round): 6 mm – 50 mm - Bar Diameter (Hexagonal): 6 mm – 45 mm - Bar Diameter (Square): 6 mm – 37 mm - Bar Length Options: 1200 mm – 3200 mm - Max Feed Speed: 30 m/min - Max Remnant Length: 300 mm - Air Pressure Required: 6.5 – 7.5 bar - Operating Voltage: 230V / 50 Hz - Weight: 1200 kg Design & Features - Guide Channel: Manually interchangeable, made of Vulkollan-type plastic for high-speed bar rotation. - Front Steady Block: Interchangeable every 5 mm for optimal bar support. - Remnant Management: Offers rear extraction via self-centering extractor or front ejection. - Repositioning System: Optional rail system allows axial or radial displacement up to 600 mm for lathe servicing. - Automation: Fully PLC controlled with brushless motor and digital pneumatic valves for speed and thrust regulation. - Bar Storage: Single-level magazine with a 235 mm load capacity. Bar Feeder: TOP Automazione Model: FU 352 - Dimensions (L×W×H): 3500 × 800 × 1200 mm - Weight: 1200 kg Bedpfxoxx R Nqo Andedi Main Features and Capabilities: - HMI digital controller for manual operations. Machine Status: WORKING - Set of guide channels and accessories for bar clamping worn - Set of bearings for pusher head worn

Condition: good (used), Year of construction: 2011, Vibratory feeder for sale, price is for one unit Bdedpfx Anewydkgedei

Condition: good (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: BF15063528, Technical characteristics: Core Specifications: Bdsdpfjxx Si Eox Andoi - Bar Diameter (Round): 6 mm – 50 mm - Bar Diameter (Hexagonal): 6 mm – 45 mm - Bar Diameter (Square): 6 mm – 37 mm - Bar Length Options: 1200 mm – 3200 mm - Max. Feed Speed: 30 m/min - Max. Remnant Length: 300 mm - Required Air Pressure: 6.5 – 7.5 bar - Operating Voltage: 230V / 50 Hz - Weight: 1200 kg Design & Features: - Guide Channel: Manually interchangeable, made from Vulkollan-type plastic for high-speed bar rotation. - Front Steady Block: Interchangeable every 5 mm for optimal bar support. - Remnant Management: Rear extraction with self-centering extractor or front ejection. - Repositioning System: Optional rail allows axial or radial displacement up to 600 mm for lathe access. - Automation: Fully PLC controlled, with brushless motor and digital pneumatic valves for speed and thrust control. - Bar Storage: Single-level magazine, 235 mm capacity. Bar feeder details: TOP Automazione model: FU 352 Semi-automatic Bar Feeder for Horizontal Loading to Lathe (Autonomy depends on bar diameter) Dimensions: Bar feeder (L×W×H): 3500 × 800 × 1200 mm; Weight: 1200 kg Main Features and Capabilities: - Digital HMI controller for manual operations Machine status: - In working condition

Condition: ready for operation (used), 4 rollers Engine power: 1.1 kW Left/right rotation 4 speeds to the right 4 speeds to the left 400 V Manual arm adjustment Two joints Bsdpfjy Sk Shex Andedi New rollers available

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, overall weight: 1,700 kg, previously installed on a CNC lathe with a diameter of 70 mm. Bjdo Ab E S Nepfx Andsdi

Condition: new, This offer is for a new ‘BDT VX 370’ long-sheet feeder Item for sale: 1 x BDT VX 370 for the following machines: Bdedjyuuc Iepfx Andei Canon imagePRESS V1350 incl. S-Bridge Condition: This is a brand-new unit in its original packaging Packaging and shipping: You are welcome to view the device during our business hours. Please arrange an appointment to do so! Seaworthy packaging and worldwide shipping available on request! For further information, please feel free to contact us directly.

Year of construction: 1997, operating hours: 30,000 h, condition: used, functionality: fully functional, OVERHAUL in 2022 New reinforced table – 660x960mm No support leg /it is available for mounting, but the program needs to be updated/. It has a new controller and can operate in sheet feeding mode. Price: 80,000 PLN Below are the specifications: Effective forming area 650 x 950mm Table stroke 300 mm Film width Up to 700 mm Installed power 15 kW Heating panel power 13 kW Pneumatic table lifting 0.4 MPa Compressed air consumption 5 m3/h Thickness of forming material 0.15-6mm Performance in cycles per hour 40 - 100 Weight approx. 250kg Dimensions: depth x width x height Bsdpezt Sukjfx Andedi 1250mm x 2230mm x 2040mm

Condition: excellent (used), functionality: fully functional, KUVERTANLEGER Wahli Feeder . Bdsdpfx Aneupmzqedoi

Year of construction: 2006, condition: excellent (used), functionality: fully functional, HOSOKAWA ALPINE 100 AS AEROPLEX SPIRAL JET MILL WITH K-TRON GRAVIMETRIC FEEDING SYSTEM For sale: complete Hosokawa Alpine Aeroplex 100 AS spiral jet mill system with K-Tron gravimetric dosing/feeding unit. The system originates from pharmaceutical use and was originally supplied to Mepha AG, Switzerland. The machine is in very good, clean condition and is supplied with extensive original documentation for both the Hosokawa Alpine jet mill and the K-Tron feeding system. HOSOKAWA ALPINE 100 AS Manufacturer: Hosokawa Alpine AG, Germany Type: Aeroplex 100 AS Machine No.: P2 150 959/1 Year of manufacture: 2006 Grinding chamber diameter: 100 mm Weight of jet mill: approx. 12 kg CONFIGURATION OF THE JET MILL Nozzle ring: - Nozzle angle: 50° - Number of nozzles: 4 - Nozzle diameter: 1.5 mm Injector: - Injector drive nozzle: Ø 1.5 mm - Catch nozzle: Ø 3.5 mm Compressed-air connections: - Grinding air: 10 bar(g) - Injector air: 10 bar(g) - Permissible operating pressure: +/- 50 mbar Connections: - Product feed: 2" - Grinding air: 1/2" - Injector air: 1/2" - Fine product outlet: 1 1/2" According to the original order-specific documentation, the machine is equipped with white, FDA-approved silicone seals. K-TRON GRAVIMETRIC FEEDING/DOSING SYSTEM The Alpine mill is combined with a K-Tron dosing system for controlled and reproducible product feeding. The system includes: - K-Tron gravimetric feeder - K-Tron KCM control unit - K-Tron Digi-Drive - Stainless steel product hopper - Weighing/measuring system - Dosing drive - Several interchangeable dosing screws for different feeding ranges - Stainless steel product feed components The K-Tron weighing system is identified as: Type: SFS 24/20 (+20KG VL) w.D. Capacity: 240 N Article No.: Serial No.: 10711664 Country of origin: Switzerland APPLICATION The Hosokawa Alpine Aeroplex 100 AS is a spiral jet mill designed for fine grinding and micronization. The grinding process takes place using compressed air, without rotating grinding tools inside the grinding chamber. Typical applications include: - Pharmaceutical powders and active ingredients - Fine chemicals - Laboratory and pilot-scale production - Micronization - Fine grinding of dry powders - Development and small production batches DOCUMENTATION Extensive original documentation is included. Available documentation includes, among others: - Original Hosokawa Alpine 100 AS operating manual - Order-specific machine data - Technical drawings - Operating and maintenance instructions - Cleaning instructions - Spare parts information - K-Tron feeder operating documentation - K-Tron technical drawings and configuration data CONDITION Very good and clean used condition from pharmaceutical use. The system was dismantled for cleaning and has been carefully reassembled. The photographs show the actual machine and its current configuration. Inspection and demonstration by appointment in 4226 Breitenbach, Switzerland. Bsdpfx Anszxt Snododi Worldwide delivery can be arranged. Subject to prior sale and errors.

Condition: new, New Conveyor with overhead feeder hopper Both units are mobile on castors Feeder hopper with opening end door, adjustable exit gate to conveyor Feeder hopper dimensions 800mm x 740mm x 600mm deep Bjdpfx Anjwd Nthodjdi Conveyor belt dimensions 1800mm x 230mm W x 1260mm H Conveyor height is adjustable VFD on conveyor drive

Condition: good (used), Year of construction: 2007, For sale: salt spreader, feed conveyor, etc. Bedpfx Anez Sk Exjdjdi

Condition: good (used), Year of construction: 1999, functionality: fully functional, 1 x Bar feeder Iemca CH 220/32 Year of manufacture: 1999 Bar machining diameter: 2 - 20 mm Bar length: 3200 mm Built-in channel: 16 mm Previously used with a CNC long turning lathe Bodpfoz Hpnfex Andodi Star SA 16 The bar feeder can be inspected at our warehouse at any time.