Used Ergometrics 900 for sale (12,435)

Condition: new, 900 mm 900 mm 900x900 mm saw band length 9300 x 67 x 1,1 mm table height 790 mm band speed 14 - 60 m/min total power requirement 11 kW weight of the machine ca. 8,45 t dimensions 4,485 x 1,68 x 3,15 m The semi-automatic, hydraulic saws from the X-tech line offer the best Saw technology and best performance when cutting special steels • The electro-welded machine frame and the steel saw frame meet requirements all cutting needs and eliminate vibration and noise. • The chip conveyor is hydraulically driven and the speed is adjustable • All movements of the machine (saw frame, vice, feed, Saw band guides) are carried out thanks to modern linear guides with high static and dynamic load performance, which also has very low sliding friction to guarantee. • Another characteristic feature is the roles for the Knedpfxsfg E Hpo Aabec Positioning of the material by a hydraulic motor are driven. They move at right angles to the material, and thus allowing optimal clamping of the material. • Thanks to the height control of the saw band position, the operator can place the band in place near the top edge of the material. After the cut is finished, the tape automatically raised back to the previous position. Alternatively you can also “Remain” can be selected in the lower position. During the The software compares the cutting load with the cutting cycle Default. This means that the sawing system can be stopped in the event of irregularities become. • The saw band is cleaned by two adjustable steel brushes. The drive takes place hydraulically. • The hydraulic unit including filter and pressure gauge guarantees one particularly quiet operation at constant pressure. • Finely ground carbide inserts that clamp the saw blade, complete with lateral, hardened and adjustable guide rollers. The adjustable one The tape guide automatically moves as close as possible to the material. • The saw band is tensioned via a hydraulic cylinder, which is carried out by the Machine software is controlled. The voltage is set according to a given Time automatically delimbed when the machine is idle or after a cycle has been carried out. • Automatic version with CNC control in the X-TECH 900 / 1200 models a feed length of 500 mm for the series for high production rates. • The material is carried by a table with seven rollers. These will driven by a hydraulic orbital motor through which the material can be placed precisely even under maximum load. • All guided movements are carried out by four recirculating ball guides with one high capacity for static and dynamic loading; strong reduced feed friction. Tempered and ground prismatic Guides. Price on request.

Condition: used, Type: CS-70/900 CTS Climate Test Chamber with Humidity, water-cooled (converted to R-452a refrigerant) Temperature range: -70°C to +180°C Humidity range: 10–98% RH Test chamber internal dimensions: Height approx. 870 mm / Width approx. 1000 mm / Depth approx. 1000 mm External dimensions: Height approx. 1950 mm / Width approx. 1200 mm / Depth approx. 2220 mm Control cabinet dimensions: Height approx. 2100 mm / Width approx. 800 mm / Depth approx. 400 mm Test chamber volume: 900 liters Refrigerant: R-452a / R23 Electrical connection: 400 V +6/-10%, 3/N, 50 Hz Connected load: 21.2 kW, Rated current: 35.7 A Chamber weight: 900 kg Control cabinet weight: 150 kg Important safety information for buyers: The following steps are carried out on all chambers we offer prior to sale: 1. Functional check and replacement of necessary components 2. Refilled with legally compliant refrigerant if required 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run Condition: used Scope of delivery: (see photo) (Specifications and technical data subject to change and errors reserved!) For any further questions, please contact us by phone. Knodpjxb Dm Iefx Aabec

Condition: excellent (used), Year of construction: 2011, operating hours: 216 h, functionality: fully functional, machine/vehicle number: 20MS090000/007, total length: 3,000 mm, type of input current: AC, total width: 2,500 mm, total height: 1,900 mm, overall weight: 1,450 kg, empty load weight: 1,450 kg, working width: 900 mm, compressed air connection: 6 bar, throughput speed: 50 mm/s, Gluing and Longitudinal Veneer Jointing Machine For 0.4 to 3 mm thickness with direct gluing. With edge pre-gluing up to 5 mm. Kodpfx Aasw E Rfbebjnc Machine has seen very little use, Available ex-stock. Separate electric motors for chain feed and glue application. The glue is applied at the edge of the newly fed veneer strip, increasing the strength of the adhesive joint. Robust, durable stainless steel conveyor chain with load-bearing joints. Independent adjustment for temperature, speed, and pressure. Quick and easily accessible glue pot for fast and simple refilling or cleaning. Multiple heating zones for individual temperature control. Extended glue pot service life due to integrated cooling unit. Continuously adjustable feed speed. INCLUDES GLUE COOLER Technical Data: Throat depth: 900 mm Min. veneer strip width: 45 mm Min. veneer strip length: 300 mm Veneer strip thickness: 0.4 – 3.0 mm (up to 5) Maximum veneer moisture content: 8 – 12% Working height: 900 mm Feed speed: 5 – 50 m/min Heating section length: 1000 mm Maximum heating temperature: 250 °C Electrical connection: 9.0 kW, 400 V, 50 Hz Compressed air: 6 bar Dimensions (L x W x H): 2400 x 2300 x 1900 mm Weight: 1500 kg

Condition: used, Year of construction: 2008, max. wheel diameter 900 mm gear width 450 mm max. module 10 min. module 1 min. number of teeth 8 milling cutter dia. x width 192 x 215 mm distance table / middle of spindle 910 / 630 mm distance bet. workpiece spdl. ctr-milling sp. 50 / 550 shifting 200 mm swivelling of milling head 240 Grad table diameter 700 mm table bore diameter 160 mm milling head speed 25 - 160 U/min total power requirement 21 kW Kedpfxswzmp Uj Aabonc change gears, arbors, shifting, 2-cut circle, chip conveyor, outer steady # with crowning device # in excellent working condition

Condition: used, Year of construction: 1998, operating hours: 55,800 h, A Reform CNC rotary table surface grinding machine is available. Segment head: 560mm, segment dimensions X/Y/Z: 94mm/38mm/180mm, number of segments: 10, segment head speed: 720rpm, rapid traverse: 2m/min. Rotary table diameter: 900mm, rotary table speed: 40rpm, new segment working height: 400mm, control: Siemens 805, operating hours: 55800h. Documentation available. On-site inspection is possible. Kodpfx Aasxgdk Rebonc

Condition: used, Year of construction: 2020, operating hours: 5,176 h, ATTENTION: Vehicle location is 66793 Saarwellingen. Viewings are only possible to a limited extent. Collection appointments must be arranged in advance without exception. Mecalac AS 900 Kjdexiuu Sspfx Aabenc - Including bucket and forks - Tyres: 14.5-20 - Radio - Operating hours: 5,176 Errors and interim sale excepted. Internal vehicle number: W41 ATTENTION: Vehicle location is 66793 Saarwellingen. Viewings are only possible to a limited extent. Collection appointments must be arranged in advance without exception.

Condition: good (used), Year of construction: 2021, – Year of manufacture: 2021 – Centre distance: 910 mm – Swing over bed: 300 mm – Swing over gap: 430 mm – Swing over cross slide: 178 mm – Spindle bore: 38 mm – 60/2000 rpm – Longitudinal and cross feed Knjdpfx Aaexhx S Esboc – Digital readout – Multifix with 4 tool holders – Safety guard – Three-jaw chuck – Emergency stop switch – Documentation – 400V

Condition: excellent (used), Precision lathe, turning machine, lathe, center lathe, center lathe -Manufacturer: WEILER, lead screw lathe type commodor 42 -Machine bed: hardened -Turning length: 900 mm -Turning Ø over bed: 400 -Turning Ø over support: 190 mm -Spindle bore: Ø 56 mm -Spindle speeds: 45 - 2000 rpm -Three-jaw chuck: Röhm Ø 200 mm -Four-jaw chuck: Röhm Ø 200 mm -Tailstock mount: MK3 -Drive: 4 kW -Accessories: 18x Multifix tool holder with rotating center see photos -Lathe dimensions: 2200/1300/H1410 mm -Weight of lathe: 1380 kg Knsdpfx Aaoxapm Rjbec

Condition: new, turning diameter over bed 320 mm turning diameter over slide rest 200 mm turning length 900 mm turning diameter in the gap 320 mm turning speeds 75 - 2000 U/min centre height 160 mm Knsdehwavropfx Aabjc spindle bore 38 mm tailstock quill taper MT 3 connected load frequency 400 V total power requirement 1,5 kW weight of the machine ca. 0,4 t dimensions of the machine ca. 1,6 x 0,75 x 1,7 m SINO digital display 3-jaw chuck 200 mm. 4-jaw chuck 200 mm. Faceplate 250mm bezel fixed Quick-change steel holder with 4 pcs. steel holder machine light Chip tray, chip protection wall Hardened and ground bed tracks lining protection machine tools

Condition: good (used), Year of construction: 2006, control Rexroth Ksdpfx Aswzmrieabsnc

Condition: ready for operation (used), Year of construction: 1989, Used single-toggle jaw crusher, 1300 x 900 mm, including replacement shaft and bearing FAG 23152 K MB C3. Knedewmgw Nspfx Aabjc The year and make of manufacture are unknown to us. The crusher operated without problems until 2023 and was then replaced with a mobile system. The fixed jaw will need to be replaced in the near future.

Condition: like new (used), functionality: fully functional, machine/vehicle number: 127, RADIAL DRILL EMA 900 X 35 USED MACHINE INTERNAL CODE: CAR 127 Kjdpfxjxf Htrs Aabenc

Condition: ready for operation (used), machine/vehicle number: 80290, Extraction capacity: 5500 m³ / h Negative pressure: 765 - 351 Pa Suction opening: 180 x 220 mm Outlet opening: 300 mm Ø Ksdpfx Aoft Siusabsnc Speed: 1400 rpm Drive motor: 380 V, 5.3 kW Weight: 60 kg Required space: 720 x 680 x 350 mm

Condition: good (used), Year of construction: 1995, Travel: X = 600, Y = 400, Z = 420 mm Speed range: 20 – 4000 rpm Gear stages: 3 Taper: SK 40 Quill stroke: 75 mm Spindle motor: 5.9 kW Feed range: 1 – 5000/6000 mm/min (manual/programmed) Rapid traverse x, y: 7 m/min Rapid traverse z: 6 m/min Clamping surface: 900 x 458 mm Knsdpow Uin Sefx Aaboc Weight: approx. 2300 kg With coolant system, electronic handwheel, various tools (without cabinet)

Condition: new, turning diameter over bed 320 mm turning diameter over slide rest 200 mm turning length 900 mm turning diameter in the gap mm turning speeds 75 - 2000 U/min centre height 160 mm spindle bore 50 mm Kjdpfx Aajvn Uz Tebenc tailstock quill taper MT 3 MK connected load frequency 230 V total power requirement 1,5 kW weight of the machine ca. 0,29 t dimensions of the machine ca. 2,0 x 0,8 x 1,56 m Professional lathe 3-jaw chuck 4-jaw chuck faceplate bezel fixed running bezel Quick-change steel holder with 4 cassettes Halogen machine light Chip tray, chip protection wall Hardened and ground bed tracks Complete coolant system feed protection machine tools

Condition: good (used), Year of construction: 2002, functionality: fully functional, machine/vehicle number: 209070, CASATI BIT 900/2000 veneer cross-cutting machine. Fully functional. Knedpfx Aeuna E Hjabec

Condition: used, Year of construction: 2017, operating hours: 960 h, functionality: fully functional, working width: 900 mm, Deburring machine in very good condition, with 900mm working width. Equipped with a wide belt grinding unit and a disc unit for grinding and deburring. Immediately available. Knodpoxddhqefx Aaboc

Condition: good (used), machine/vehicle number: 2856, Year of construction: 1997, load capacity: 10,000 kg, lifting height: 5,500 mm, mast type: duplex, fork carriage width: 200 mm, fork length: 2,100 mm, total length: 4,910 mm, total width: 2,550 mm, operation weight: 17,600 kg, additional equipment features: Dual tread, Weight system, Warning triangle, Equipment: lighting, SveTruck 10-900 from Uniktruck Knsdpfx Aotu Nr Ajaboc

Year of construction: 1970, condition: used, engine: 380 V, 5,5 kW Knsdpfxs Sxmis Aabec space needed: 1200 x 1600 x 3200 mm weight: 1200 kg

Condition: ready for operation (used), Year of construction: 2018, travel distance X-axis: 470 mm, travel distance Z-axis: 876 mm, spindle motor power: 30,000 W, spindle speed (max.): 1,250 rpm, rapid traverse X-axis: 24,000 m/min, rapid traverse Y-axis: 24,000 m/min, turning diameter: 1,000 mm, total length: 2,375 mm, total height: 3,659 mm, total width: 4,558 mm, type of input current: three-phase, torque: 3,655 Nm, input voltage: 400 V, overall weight: 14,000 kg, Equipment: cooling unit, CNC Vertical lathe MAZAK Mega Turn 900 TECHNICAL CHARACTERISTICS: CNC control: MAZATROL SmoothG Max. turning diameter: 920 [mm] Max. cutting diameter: 1000 [mm] Stroke X axis: 470 [mm] Stroke Z axis: 876 [mm] Knsdow T Tmpjpfx Aabsc Rapid traverse rate X axis: 24000 [mm/min] Rapid traverse rate Y axis: 24000 [mm/min] Spindle nose: A2-15 Max. spindle speed: 1250 [rpm] Spindle power: 30 [kW] Spindle torque: 3655 [Nm] Min. distance from spindle face to turret face: 154 [mm] Max. workpiece weight: 3000 [Kg] Max. distance from spindle face to turret face: 1030 [mm] Number of tool stations: 12 Turret indexing time: 0.4 [s/pos] Lubrication tank capacity: 516 [l] Total power required: 58.9 [kVA] Supply voltage: 400 [V] Dimensions: 2375 × 4558 × 3659 [mm] Weight: 14000 [Kg] More information available upon request.

Condition: new, turning diameter over bed 320 mm turning diameter over slide rest 200 mm turning length 900 mm turning diameter in the gap mm turning speeds 75 - 2000 U/min centre height 160 mm Kodsnq Sayjpfx Aabonc spindle bore 50 mm tailstock quill taper MT 3 MK connected load frequency 230 V total power requirement 1,5 kW weight of the machine ca. 0,29 t dimensions of the machine ca. 2,0 x 0,8 x 1,56 m Professional lathe 3-jaw chuck 4-jaw chuck faceplate bezel fixed running bezel Quick-change steel holder with 4 cassettes Halogen machine light Chip tray, chip protection wall Hardened and ground bed tracks Complete coolant system feed protection machine tools

Condition: excellent (used), Year of construction: 2005, operating hours: 400 h, Trane CGAN 900 Air-Cooled Water Chiller Product Name: Trane CGAN 900 Air-Cooled Water Chiller Year of Manufacture: 2005 Stock Availability: 1 Unit Product Code: 6994 Knjdpfx Aaoikz Hxobjc Technical Specifications: • Brand: Trane • Model: CGAN 900 • Product Type: Air-Cooled Chiller • Cooling Capacity: 241.3 kW (68.6 tons) • Refrigerant: Freon R407C • Compressor: 6x Trane CSHA 150KE Scroll Compressors • Weight: 2,423 kg • Dimensions (LxWxH): 3450x2300x2100 mm Remarks: This 2005 model Trane CGAN 900 comes equipped with 6 scroll compressors, providing robust and efficient cooling capacity. Despite being a used unit, it has been well-maintained and offers reliable performance for various industrial cooling applications.

Condition: good (used), Year of construction: 1991, Travel range: X= 600, Y= 400, Z= 420 mm Speed range: 20 – 4000 rpm Gear stages: 3 Spindle taper: SK 40 Quill stroke: 75 mm Spindle motor: 5.9 kW Feed range: 1 – 5000/6000 mm/min (manual/programmed) Rapid traverse x, y: 7 m/min Rapid traverse z: 6 m/min Clamping area: 900 x 458 mm Weight: approx. 2300 kg Kodpjwvif Ujfx Aabjnc With coolant system, electronic handwheel, measuring probe (defective)

Year of construction: 1970, condition: used, Stand adjustable crosswise by hand: 600 mm Spindle on column manually adjustable in height: 1200 mm hydraulic automatic vertical movement: 900 mm Knjdeb N Dgmepfx Aabec hydraulic automatic transversal movement: 200 mm maximum distance between table and spindle support (long spindle): 600 mm drive motor: 380 V, 2800 rpm, 5,5 kW table-Ø: 550 mm space requirement: 1600 x 1200 x 3200 mm Weight approx.: 1.2 t hydraulics: 2,2 kW; space requirement: 800 x 800 x 1200 mm; weight approx.: 300 kg

Year of construction: 2010, condition: good (used), machine/vehicle number: 182245, table mounting size: 500 x 1050 mm movements x/y/z: ca. 800/500/500 mm spindle taper: BT 40 ISA min./max. distance table/spindle: 100/650 mm spindle turning speed range: 8000 rpm number of tool positions: 24 pieces carriages: 5 - 6000 mm/min rapid move: ca. 15 m/min spindle drive: 11/15 kW electrical connection: 400 V, ca. 20 kVA kW space needed: 2450 x 2220 x 2780 mm weight: 5200 kg Delivery time: approx. middle April 2017 Kjdpfx Aedbh Udeabenc