Used Ess 240 M for sale (77,309)

Condition: new, table length 4000 mm table width 2000 mm table height 200 mm weight of the machine ca. 2,5 t Pgodpfeibw Sxjx Alhsn - high quality steel S355J2+N + plasma nitriding - Material thickness approx. 24.5 - 27 mm - Bore Ø 28 mm - Holes surface 100x100 mm grid - Rounded corners, edges and holes - Side panel height 200 mm - Hole spacing side panel 50 mm - Including scaling on the surface - Structure reinforced with ribs - Grid lines allow for precise builds The basic equipment foot is available in various lengths. The load capacity of the foot is 2,000 kg.

Condition: used, mileage: 2,00,000 km, Year of construction: 2008, 2-axle truck, 16-ton GVW, fitted with a 3-way tipper body measuring 4.20 x 2.50 m, payload 7,100 kg, Effer 115 series crane with 4 hydraulic extensions and radio remote control, manual transmission, 3,800 mm wheelbase, K version. Note: The vehicle description is indicative and may contain errors or inaccuracies. Please contact us to verify the exact data. Pgsdeytg Sxopfx Alhon

Condition: new, Year of construction: 2022, width of the strips 75 mm band length 2000 mm Pgodpfx Alsx H Aliehjn band speed 36 m/min total power requirement 4 kW weight of the machine ca. 82 kg dimensions of the machine ca. 1000 x 500 x 1150 mm Belt sander Metallkraft MBSM 75-240-1, article no.: 3923272 For sanding surfaces, edges and rounding off Description: - Powerful motors and vibration-free operation for the best sanding results - Quick sanding belt change in seconds thanks to quick-release system - Large surface sanding area thanks to fold-away upper sanding belt cover - Continuous sanding surface after removal of attachments enables sanding of long workpieces too - Can be used with and without extraction - One extraction nozzle on the spark box and one on the rear belt roller - Simple adjustment of the belt run via adjusting screw - Automatic retensioning of the sanding belt thanks to spring-loaded belt tensioning system - Infinitely tiltable sanding unit - Fold-away protective screen

Condition: used, Year of construction: 2025, operating hours: 2 h, Operating hours: 2 New tractor with dealer daily registration prior to delivery Standard equipment / technical data Engine Rated power (ISO): 82 / 110 kW/hp at 2200 rpm Maximum power: 86 / 115 kW/hp at 2000 rpm Maximum torque: 460 Nm at 1600 rpm Manufacturer / Type: Agco Power / AP 44MBTN-D5 Low-emission engine, 4-cylinder / 4.4 l, 4 valves, STAGE 5 Regulated turbocharger, SCR catalytic converter DOC – Diesel oxidation catalyst SC soot particle filter One-piece, tiltable engine hood Exhaust on right side, in front of cab Fuel tank capacity: 198 liters / AdBlue: 18 liters Transmission / PTO 16/16-Speed Dyna-4, SpeedMatching, 40 km/h PowerControl left-hand operation with powershift reverser, 4-step powershift Permanently cooled wet multi-plate clutches with independent lubrication system Dual-speed PTO: 540 / 540E / 1000 rpm Electronic shift in cab PTO START/STOP button on left rear fender Hydraulics / Rear linkage Open Center system, 58 l/min total flow, max. 200 bar 2 control valves with hydraulic couplers: 1x single/double-acting, pressure relief + 1x single/double-acting, neutral leak, SST Category 3 quick coupler with balls and catcher bowls CAT 3/2 Podpfx Aeyvmq Islhjgn Lower link draft control 5,200 daN maximum lift force, 2 external lift cylinders Adjustable lift rods on both sides and 2 side stabilizers EHR with external operation on both rear fenders Electrical equipment Thermostart, 120 A alternator Electric battery isolation switch 12 Volt power supply for external devices with socket Axles / Additional weights Rear axle ND with flange hub Oil-cooled disc brakes Height-adjustable automatic drawbar Rear fender outer width 2.00 m, without extensions Front weight carrier with integrated drawbar and towing pin Driver's station Standard cab with vibration damping, standard roof, ventilation and heating, air conditioning Integrated safety frame with tinted glass Doors on both sides with safety steps Adjustable steering column (height & tilt) Air-suspended driver's seat with armrests, swivel adapter, and seat belt 2 large telescopic exterior and wide-angle mirrors Interior mirror Analog-digital dashboard (SIS) Radio pre-wiring with antenna and speakers 4 work lights each at the front and rear of the cab roof 2 headlamps each in the engine hood and on the handrails, 2 work lights on rear fenders Rear window washer/wiper All-wheel front axle with selectable differential lock Special equipment With fuel tank protection PowerControl & brake to neutral (clutch effect) 100 l/min Open Center hydraulic system oil flow sharing (58+42 l/min) Leak oil collector at quick couplers 3 control valves: 1x pressure relief, double-acting, float, SST + 1x double-acting, neutral leak, SST + 1x double-acting, neutral leak, SST + free return 2.5 t front linkage, 1 hydraulic hose set, electrical socket 480/70R38 ADJ Ø1.69m & 380/70R28 ADJ Wide rear fender extensions Air conditioning Cab with mechanical suspension Telescopic exterior and wide-angle mirrors Passenger/instructor seat with belt Air-suspended driver's seat, automatic setting with seat belt, swivel adapter, and armrests Rear window washer/wiper Automatic battery isolation switch, 12

Year of construction: 2008, condition: ready for operation (used), Operating pressure: 10-20bar, weight: 1.33t, with buffer storage, pumps and external heat exchanger. Pgodpfxogz S Ndo Alhsn

Condition: used, axle configuration: 3 axles, first registration: 06/2011, loading space length: 13,400 mm, loading space width: 2,500 mm, loading space height: 2,260 mm, suspension: air, tire size: 385/55R22,5, wheelbase: 1,320 mm, Year of construction: 2011, Tyre size: 385/55R22,5 Suspension: air suspension Rear axle 1: Steering Drive: Wheel Empty weight: 11.340 kg Carrying capacity: 23.660 kg Pedsuc Ebzspfx Alhogn GVW: 35.000 kg

Year of construction: 2011, condition: ready for operation (used), A complete bottle filling and capping line is available. Ring bowl diameter: 960mm, filling valve count: 24, capping stations (KK): 6, capping stations (SV): 6, capper diameter: 240mm, filler and capper pitch: 125mm, filling capacity (0.5l): 6000bottles/h, bottle volume: 330ml/500ml, operating hours: approx. 7200h. An on site inspection is possible. Psdpfoyhgnpex Alhsgn

Condition: used, mileage: 4,12,949 km, power: 177 kW (240.65 HP), first registration: 02/2012, tire size: 245/79R17,5, axle configuration: 4x2, wheelbase: 5,350 mm, color: white, gearing type: mechanical, number of gears: 6, emission class: euro5, suspension: steel, loading space length: 7,620 mm, loading space width: 2,470 mm, loading space height: 2,210 mm, Year of construction: 2012, Equipment: electric window regulation, tail-lift, Suspension: leaf suspension Front tyre size: 245/79R17,5 Rear axle: Tyre size: 245/70R17,5; Double wheels Drive: Wheel Empty weight: 6.283 kg Carrying capacity: 5.707 kg Pgsdpjygh Ubefx Alhen GVW: 11.990 kg Make of engine: Renault Tail lift: tail lift

Condition: reconditioned (used), functionality: fully functional, Drilling and pressing machine for all types of furniture fittings, rows of holes and hole group drilling machine in system 32 Power connection 400V 0.75kW Spindle speed 2800 rpm Stop ruler 960 mm 2x swivel stop for drills with shaft diameter 10 mm Workpiece thickness max. 40 mm 1x 7-spindle drilling head for row of holes, pitch 32 mm with integrated pins Manual feed Base at an additional cost Olive drilling head €450.00 Podpfxeumw Sbj Alhogn Mepla drilling head with pressing die €550.00 Hettich drilling head with pressing die €550.00

Condition: good (used), mileage: 7,02,984 km, power: 272 kW (369.82 HP), first registration: 07/2005, fuel type: diesel, axle configuration: 6x2, fuel: diesel, color: white, driver cabin: day cab, gearing type: mechanical, emission class: euro3, suspension: steel-air, Year of construction: 2005, Equipment: cruise control, electric window regulation, fog lights, power mirror, = Additional options and equipment = - Aluminum fuel tank - Leaf suspension - EPS (electronic power steering) - Radio/CD player - Side door = Further information = Axle configuration: Pgedpfswuup Nsx Alhsn Front axle: Steering; Suspension: leaf suspension Rear axle 1: Suspension: air suspension Rear axle 2: Lift axle; Steering; Suspension: air suspension Weights: Unladen weight: 11,760 kg Payload capacity: 14,240 kg Gross vehicle weight: 26,000 kg Condition: Technical condition: good Visual condition: good Warranty: Warranty: No liability for printing and typographical errors. Subject to change, prior sale, and mistakes! Additional information: Contact Emad Al Shogran for further details. Vehicle number: 28 Renault Premium 370 / 6x2 / Silo Compressor / Steering + Lift Axle / Euro 3 / 27 m³ Chassis number: VF622CVA000109327 Suspension: leaf / air; steering and lift axle Transmission: manual gearbox Engine brake Cruise control Emissions standard: EURO 3 Silo compressor Body: Brand: n.v OVA. s.a. Year of manufacture: 2005 4 compartments 27 m³ = Company information = No liability for printing and typographical errors. Subject to change, prior sale, and mistakes! Al Shogran GmbH An der Glashuette 15 41516 Grevenbroich Tel.: Mobile: Ms. Sabine Faust Email:

Condition: used, Year of construction: 2022, Length: 2400 / number of strips: incl. the following components: 1 x APR032 / galvanized steel cover 2400 1 x APR013 Set 11 PPN strips 1820x285 1 x APR034 / Set 11 PPN strips 600x285 visible trimming length 265 / Pgsdpfx Ast Hd Eujlhen

Condition: used, Year of construction: 2023, . / Pjdsr Ty Rfjpfx Alhjgn

Condition: used, Year of construction: 2023,

Condition: used, Year of construction: 2023,

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, Korimat KA-240 Autoclave Pressure Cooker 230V Gas-operated Psdpev Tyu Asfx Alhogn V2A 21kW 240L Built in 2009 2.5 bar The system is fully functional ready for immediate use. Accessories: 3-part basket Further information available upon request! Cash or prepayment! Sale to businesses only. No guarantee or warranty.

Condition: used, Year of construction: 1988, cutting diameter 210 mm band length 400 mm capacity 90 degrees: square 190 mm capacity 90 degrees: flat 240 x 190 mm cutting speed 16/32 m/min total power requirement 1,1 kW weight of the machine ca. 180 Kg Pgjdpjxz Hhhjfx Alhen dimensions 1,2 x 0,8 x 80,8 m Hydraulic hacksaw with: - Coolant device - good condition

Condition: used, Used and in good condition Koma Multi-deck KMD-4-240-1500 Z-profile freezer with 3x hand over of product. Effective belt width 2.380 mm and effective belt length 4 x 15.000 mm. Belt speed can vary between 0,07 m/min and 2,30 m/min. Belt drive motors 4x Flender This multi-deck comes with a complete installation. 6x Bitzer S6F-30.2Y-40P (x2) compressor set with liquid reciever, oil separator, filter, pressure safety switches and gauges. 6x Koma CAV L09 1x2A condensors with 2 fans. Installation complete with control panel with Somron sysdrive inverters. drives and automation. 6x Evaporators from Goedhart LLK.p 187 M2 with a capacity of 27 kW at 25.000 m³/h per piece. Fans have a downblow of 45°C. This tunnel freezer is currently assembled in our warehouse as you can see in the last photo, ready for a viewing. 800 piece/h apple pie in 60 minutes ( 2200 grams/piece) +40ºC to -18ºC. Pgjdpfxerlk Iks Alhsn

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, Weinig Dimter Profipress C 2800 P - 6 m gluing press Manufacturer: Weinig Dimter Podpeyvgiasfx Alhjgn Model: Profipress C 2800 P - 6 m Year of manufacture: 2009 Condition: Very good Machine description: For sale: Weinig Dimter Profipress C 2800 P - 6 m wood gluing press, year 2009, designed for the production of glued wooden panels and elements made of soft timber. The machine was developed for efficient production using PVAC glue in D2 / D3 class and allows processing of material within specified width, thickness and input length ranges. According to the documentation, this model can process timber with widths from 30 to 80 mm, thicknesses from 15 to 40 mm and input lengths from 2100 to 2800 mm. The machine allows the production of panels with variable widths from 600 to 1200 mm. For short lengths, the collecting distance range is 700 to 1400 mm. The output is up to 10 to 15 infeeds per minute, depending on the entrance width. The Profipress C 2800 P - 6 m is intended for processing soft timber. The permitted bending tolerance is maximum 5 mm per meter. The documentation also specifies recommended operating conditions, including room temperature from 15 to 30 degrees Celsius and air humidity in the range of 40 to 65 percent. Technical data: - Model: Profipress C 2800 P - 6 m - Year of manufacture: 2009 - Performance: max. 10–15 infeeds/min, depending on entrance width - Timber width: 30–80 mm - Timber thickness: 15–40 mm - Timber entrance length: 2100–2800 mm - Collecting distance for short lengths: 700–1400 mm - Panel width: 600–1200 mm - Timber type: soft timber - Permitted bending: max. 5 mm/m - Glue type: PVAC D2 / D3 - Recommended room temperature: 15–30°C - Recommended air humidity: 40–65% Features and advantages: - Press designed for glued panel production - Machine from the renowned Weinig Dimter brand - Output up to 10–15 infeeds per minute - Possibility to produce panels with variable width - Suitable for processing soft timber - Works with common PVAC D2 / D3 glue - Industrial application for woodworking and production plants

Year of construction: 2012, condition: used, Used equipment Year of manufacture: 2012 Pjdpfx Aox H U Nyjlhsgn Device for easy assembly of drawers Availability: short-term Location: Flörsheim

Condition: new, functionality: fully functional, Year of construction: 2026, color: grey-black, overall weight: 15,000 kg, maximum load weight: 12,000 kg, empty load weight: 2,400 kg, loading space width: 2,500 mm, loading space length: 6,500 mm, loading space height: 125 mm, Dear Sir or Madam, We are offering a new roll-off platform for sale, manufactured in our own production facility. Pgjdpfszhid Sox Alhsn The platform features the following: - Manufactured according to DIN 30722-1 - Mounting bracket, 50mm diameter - Hook height 1570mm - Usable platform length 6,500mm - Tare weight 2,400kg / Payload 12,600kg - 5mm diamond-plate floor / 4mm front wall thickness - Robust hook mount with surrounding plates - IPN 180 longitudinal beams / reinforced - External rollers, lubricatable and replaceable - Primer, painted in RAL 7016 / Anthracite - C-locking mechanism according to DIN - 5 pairs of recessed lashing eyes with a tensile force of 2.5t each - Each side with perforated strips with 30mm holes - 6x robust and lockable inserts for leveling the wheel tracks - Wheel tracks recessed by 120mm - Recessed wheel tracks, each approx. 5500mm long & 708mm wide - 2x lockable steel storage compartments at the front - 2x lashing rings with 5.3t tensile force each on the inside of the front wall / 2x 5.3t lashing rings embedded in the floor at the rear - 2x warning markings according to §32 (1) StVO & DIN - Incl. type plate & container inspection according to DGUV rule 114-010 - Immediately available Also available in 5.5m and 6m usable platform length. Nationwide delivery possible for an extra charge! If you are interested in other roll-off container products, we would be delighted to receive your inquiry!

Condition: new, Year of construction: 2026, Folding bench ZGR2000/1.2 of company prod - masz locally to the try out and equal to the take. You get professional instruction on the spot. Working width 2140 mm Sheet thickness up to 1, 2 mm Bending angle up to 145° -Forward: 80 mm Gas pressure spring Scala of degree of Velocity for preset bending angle Hanger depth stop Tray for sheets Weight approx. 250kg Accessories - Rollenschere(bis 0,8mm) 350EUR Pgodpfxozfirko Alhjn Shipping within Germany 180EUR All prices are inclusive of value added tax. Certificate CE Warranty: 12 months Pickup Other dimensions (1000,1440,2140,2640,3140,3640,4140mm) on demand

Year of construction: 2024, condition: new, SPECIAL OFFER: Press brake AD-S 1260 Length/Width/Height: 2300mm/1550mm/2850mm Weight: 47000 kg Bending force: 60 tons Bending length: 1250 mm Distance between stands: 1050 mm Stroke: 160 mm Installation height: 530 mm Overhang: 450 mm Table height: 900 mm Table width: 104 mm Y rapid traverse: 200 mm/sec. Y working speed: 10 mm/sec. Control: CYBELEC MODEVA 19T touchscreen CE compliant with manual F.AKAS II M -FPSC-B-C (SAFETY PLC) European upper tool: P97.75.R08 (one of them is split) European lower tool: M.460R.85 (one of them is split) Manual quick clamping Y1, Y2, X, R (4 axes) X=650mm X,R CNC-controlled motorized crowning 60mm die holder (only for European dies) Overhang 410 Adjustable support arms at the front with T-slot, strip stop and guide along the entire length Rear stop: Siemens DC servo motor & linear guide & ball screw system Support arms: 2 pcs Stop fingers: 2 pcs With foot pedal Oil capacity: 100 l Price is valid ex Staufenberg. Pgjdped R Dhpsfx Alhen The machine can be inspected and demonstrated at any time in our showroom in Staufenberg by prior appointment. Other machines are available for demonstration at our location in Staufenberg. Upon request, we will gladly provide you with further information.

Condition: used, functionality: fully functional, Year of construction: 2023, Kaeser Compressor M 59 PE - braked — Year of manufacture 2023 Used, from the professional rental fleet of Kurt König Baumaschinen GmbH, Einbeck, Germany. Condition & Notes: Pgsdpfx Aoy A E Dgelhsn - Condition: Used, ex-rental, regularly serviced - Functionality: Fully operational - Product photos to follow — please contact us for current images - On-site inspection in 37574 Einbeck available by appointment Price EUR 25,100 plus VAT | EXW Einbeck | Delivery upon request

Condition: as good as new (ex-display), Year of construction: 2026, functionality: fully functional, power: 37 kW (50.31 HP), unused Showroom model, immediately available: new screw compressor ALMIG BELT XP 37 - 10 bar with Aircontrol Basic control year: 2026 Operating hours: 0 Bh Specifications Type : BELT XP 37 Operating pressure : 10 bar(ue) Flow rate, according to ISO 1217 Annex C : 5.96 m³/min Degree of protection / insulation class drive motor : IP 55/ISO F Nominal power drive motor : 37 kW Podey U H N Ujpfx Alhsgn Operating voltage / frequency : 400/50 V/Hz Sound pressure level (DIN 45635 T.13) : 74 dB(A) Length : 1350 mm Width : 940 mm Height : 1680 mm Weight : 895 kg Compressed air connection : G 1 1/2" Visit our shop in Erlangen. We always have a wide range of new and used compressors in stock.

Condition: used, functionality: fully functional, Year of construction: 2024, KAESER Compressor M 59 PE — Year of manufacture 2024 Used, from the professional rental fleet of Kurt König Baumaschinen GmbH, Einbeck, Germany. High-quality and versatile compressor for construction sites and workshops. Compressor block Made in Germany. Condition & Notes: - Condition: Used, ex-rental, regularly serviced Pjdpfxsy A E Dao Alhjgn - Functionality: Fully operational - Product images are sample photos showing the machine in new condition — actual condition varies depending on duration of use - On-site inspection in 37574 Einbeck available by appointment Price EUR 26,400 plus VAT | EXW Einbeck | Delivery upon request