Used Ess 240 M for sale (89,337)

Year of construction: 1984, condition: used, GENERAL INFORMATION Heat exchange area: 8.5 m² Year of manufacture: 1984 Outside diameter: 350 mm Inside diameter: 270 mm Total length: 2,090 mm Insulation: available Other information: 2 tubes of the tube bundle were welded shut by the previous operator; baffle plate in the front head has detached from the weld seam and must be rewelded by the buyer before commissioning (see photos). Location: Bremen Nameplate: Condition: used Previous application: brewery INSULATION Insulation jacket material: stainless steel SHELL SIDE Shell side volume / liters: 54 liters TUBE SIDE Tube side volume / liters: 22 liters Cedpfx Ajxqclzjddsrk Max. allowable operating overpressure shell side / bar: 15.0 bar Max. allowable operating temperature shell side / °C: 170 °C Max. allowable operating temperature tube side / °C: 170 °C Max. allowable operating overpressure tube side / bar: 4.0 bar

Year of construction: 1999, condition: used, functionality: fully functional, 2 x 173 m³ Storage Silos made of Stainless Steel (Material 1.4301) (formerly used as plastic granulate silos) Technical Data / Dimensions Available units: 2 Volume: approx. 172,000 liters Type: Silo Condition: used Design: vertical Internal diameter: approx. 3,500 mm Cylindrical height: approx. 21,000 mm Total height: approx. 17,500 mm Weight: approx. 9,000 kg Specific gravity of medium: 0.6 to/m³ Operating pressure: non-pressurized Ground clearance: approx. 500 mm Material / Specifications Internal shell material: stainless steel Remarks: Material grade 1.4301 Support type: base ring/stand collar Top base: conical top Slope: approx. 15% Bottom base: conical Cone angle: 60 degrees Top section: 1 x roof perimeter guard rail, height: approx. 1,200 mm 1 x crossover platform with guard rail 2 x lifting lugs 1 x manhole DN 600 1 x connection flange for level measurement 1 x welded socket for overfill sensor 1 x flange DN 100 (filling) 1 x vent with hood Shell: 1 x operator access door (approx. 1,800 x 850 mm) 1 x cable conduit 1 x filling line DN 100 ending in TW connection Credpfexvtvuex Addek 1 x welded adapter for empty indicator Bottom section: The silos terminate at the bottom in a 60° cone with an emergency shut-off slide valve and a mounted suction box (see photos). A triple-flight access ladder with back protection and rest platforms is optionally available.

Condition: good (used), functionality: fully functional, Capacity 160 tons --- Bending length 1250 mm --- Stroke 250 mm --- Thrust 500 mm --- Max. installation height 480 mm --- Weight approx. 11.2 tons --- Csdpfx Aexu T Injdderk Power 30 kW --- System tool holder + tools

Condition: refurbished (used), Refurbished DKV III through-feed press with brake unit Optionally with original hydraulic motors or conversion to servo motors Options: - Chain threading - Traveling cross-cut saw Function: Credjv T Aqyopfx Addok For pressing finger joints without stopping (in through-feed). The upper and lower plate chains generate feed force. Downstream brake plates transmit the required longitudinal pressing force to the wood through friction. Advantages: - High performance despite relatively slow feed rate - Absolutely no vertical tine offset of the finger joints Technology: Heavy 2" plate chain, pneumatically raised and lowered Floating brake elements Pressing force measurement via contact pressure gauge Electric height adjustment Maximum pressing force adjustable and dependent on feed speed and wood cross-section: 4500 daN at 32 m/min 2200 daN at 70 m/min Adjustable feed speed: 10-70 m/min Drive power: Feed unit adjustment: 1 kW Brake adjustment: 1 kW Hydraulic motors: 45 kW Technical specifications: Log width: 90 - 180 mm Log thickness: 20 - 80 mm Thickness to width ratio: 6:10 Maximum wood cross-section with 15/16.5 mm tines: 90 cm²

Condition: excellent (used), functionality: fully functional, Year of construction: 2008, Very neat H Brake from Safan with new control system Csdjxnqfdjpfx Addsrk

Condition: used, Year of construction: 1991, machine/vehicle number: 041-024/39, Press capacity: 63 ton Throat depth: 360 mm Stroke: 500 mm Csdpfjvai R Tjx Adderk Daylight: 800 mm Table surface area : 750 x 560 mm Slide area: 630 x 400 Working speed: 60 mm / sec Return speed: 380 mm / sec Electrical connected load: 12,6 kW Dimensions L x W x H: 1.200 x 1.950 x 2.800 mm Weight of machine approx.: 4,3 ton

Condition: used, GENERAL Exchange surface: 1.3 m² Outer diameter: 620 mm Insulation: available Other information: Permitted operating temperature: 200°C Channel A: Volume: 7 liters Permitted operating overpressure: -1/+5 bar Gap width: 5 mm Medium: LM.C Channel B: Volume: 7 liters Permitted operating overpressure: 5 bar Credpfsxqckksx Addjk Gap width: 5 mm Medium: Glyko 50 Heat transfer surface material: 1.4404 (V4A) Insulation jackets partially incomplete Connections partially cut off (see photos) Location: Bremen Technical documentation: drawing Nameplate: Condition: used Last application: pharmaceutical chemistry INSULATION Insulation material: Armaflex Insulation jacket material: aluminium

Year of construction: 2008, condition: ready for operation (used), functionality: fully functional, * Wemhöner Basic 1000 Plus - Year of manufacture 2008 * Type KT-MB-28/15-240 * With automatic pin system and inline turner * 2 tables with automatic vario-pin system * With Teflon coating for pre-glued foil * Foil laying system for pin table (pre-glued foil) * Heating plate size: 2800 x 1500mm * Max. workpiece size: 2,540 x 1,250mm * Membrane: yes * Cutting station * Foil storage carousel, 3.2m high with 14 suspension rods * Siemens S7 PLC control Cedsxbcudopfx Addsrk * Siemens TP 270 (touchscreen) operating unit for PLC control * Automatic membrane tensioning * Installed power supply 38.5 kW * Max. chamber pressure 6 bar * Max. press opening 150mm * 6 cylinders with Ø 125mm * Operating voltage 400V 50/60Hz * Press chamber height 40/60mm * Max. pressing force 2400 kN * Operating pressure of the hydraulic system 320 bar

Condition: excellent (used), Year of construction: 2005, Hot water tank/heat storage tank made of V4A, upright Technical data / dimensions Available quantity: 1 Volume: approx. 164,000 liters Tank type: Storage tank Condition: used Suitable for food: yes Design: upright Diameter inside: approx. 3,900 mm External diameter: approx. 4,200 mm Cylindrical height: approx. 13,000 mm Total height: approx. 17,220 mm Weight: approx. 10,500 kg Specific weight of the medium: 1.0 to/m³ Operating pressure: unpressurized Wall thickness shell / cylinder: approx. 5.3 - 7 mm mm Ground clearance: approx. 1,800 mm Operating temperature: -10°C/+90°C degrees Celsius Material / properties Material inner jacket: V4A (1.4571) Material double jacket: Stainless steel Inner surface: 2B Weld seams ground on the inside Insulation Insulation available Insulation thickness: approx. 100 mm Insulation material: Mineral wool Insulating jacket material: Aluminum Insulating jacket: screwed/riveted Notes: Cone roof cladding: Stainless steel Cylinder cladding: Aluminum trapezoidal sheet Cone cladding: Aluminum smooth sheet Equipment Stand form: foot ring/stand frame Fastening: fixed Top shelf type: Conical base Bottom shelf type: Conical base Top floor: 1 x dome DN 200 with insulating cover 1 x flange DN 32 welded in the dome (CIP) 1 x DN 32 dome drainage 1 x DN 50 cable conduit 1 x overflow DN 150 2 x crane eye Jacket: 1 x inlet pipe DN 100 Cedpsqagl Hjfx Addjrk 1 x filling pipe DN 100 4 x thermometer sleeve (ø 26 mm) with insulation box 1 x CIP line DN 32 1 x type plate 1 x access door (approx. 2,000 x 1,000 mm) 1 x DN 100 outlet nozzle Underbody: 1 x swivel cone DN 450, ending in smooth flange DN 100 Notes: Otherwise as per pictures and drawing documentation Drawing

Condition: used, machine/vehicle number: 05-96, MASPELL DRYER TYPE PRESS M: Crodsxuv Nnspfx Addjk Wood capacity: 1.6 m3 Hot water heating system, New heating element, 5 plates of 1000 x 5000, Stainless steel chamber dimensions: 6000 x 1700 x 1000

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: 30013011, 27.10 25: The machine is running in series production. Shutdown planned for mid-2026. Used grinding machine, model year 2008, for plunge grinding, including base tray and part loading via gantry loader (Theilinger Automation). There are two used machines available for sale. ----- Please provide your offer price and desired quantity. Sale only within Europe (EU), including Turkey, the United Kingdom, and Switzerland. ----- Technical specifications can be found in the handout. Codsth Rzaepfx Addork Without packaging; all warranty rights are excluded. If you wish to dismantle the equipment yourself, please indicate this in your bid. We do not guarantee the accuracy of the technical data, the completeness of accessories and tooling, or compliance with all safety and environmental protection requirements stipulated in the accident prevention regulations.

Condition: repair required (used), Year of construction: 2003, Screw compressor, compressor, compressed air unit, stationary compressed air compressor -Handover in the current condition as viewed -defective, not functional, problem: frequency converter does not communicate with the software -Delivery quantity: 3.2-6.9 m³/min -Engine power: 18-24 kW Crjdpfjhabk Djx Addek -Construction: encapsulated -Max. pressure: 12.75 bar -Operating hours: 108252 h -Load hours: 30754 h -Year of construction: 2003 -Dimensions: 1850/850/H1900 mm -Weight: 592 kg

Condition: used, GENERAL Exchange surface: 1.3 m² Total height: 1,000 mm Insulation: present Other: Permissible operating temperature: 200° C Channel A: Volume: 7 liters Permissible operating overpressure: -1/+5 bar Gap width: 5 mm Medium: LMF Channel B: Volume: 7 liters Permissible operating overpressure: 5 bar Gap width: 5 mm Medium: Glyko 50 Heat exchange surface material: 1.4404 (V4A) Connections partially cut off (see photos) Location: Bremen Technical documentation: drawing Nameplate: Condition: used Last field of application: Pharmaceutical chemistry INSULATION Insulation material: Armaflex Insulation jacket material: aluminium Credpfxsxqci Hs Addek

Condition: new, pressure 60 t stroke 380 mm table surface area Arbeitsbreite 750 mm pressure 259 bar oil volume 38 dm³ ajustment speed 2,87 mm/sec work speed 9,5 mm/sec return speed 12 mm/sec total power requirement 2,2 kW weight of the machine ca. 540 kg Crjdpfxsi A S I Ie Addok Inner diameter of the cylinder [mm]: 170 Piston rod diameter [mm]: 75 Diameter piston crown [mm]: 100 - Integrated pressure gauge - Pressure regulator - Hydraulic unit with 2 speeds - Working table adjustable in height - Joystick to move the piston up / down The 60 ton workshop press has a fixed cylinder and a height-adjustable work table (motorized). Equipped with Pressure regulation, manometer, 2 speeds and a joystick for the move the piston up and down. With this joystick you can use the piston precisely move, making this hydraulic press perfect for precision jobs suitable.

Condition: reconditioned (used), functionality: fully functional, operating pressure: 180 bar, high-pressure hose length: 10,000 mm, empty load weight: 130 kg, input voltage: 400 V, KARCHER HDS SUPER M Eco HOT WATER PRESSURE WASHER This device features new accessories, including a German R+M gun, stainless steel lance, steel braided hose, and a 25° power nozzle. A durable brass head with new ceramic pistons and seals guarantees long and trouble-free operation. A highly efficient three-phase motor ensures stable operation even during prolonged use. With operating parameters of 180 bar and 900 l/h, the machine can be effectively used for heavy-duty work in construction, logistics, and agriculture. Each device we offer has individually taken photos; you buy exactly what you see. TECHNICAL DATA: Power supply voltage [V]: 400 ~ 3-phase Discharge capacity [l/h]: 900 Operating pressure [bar]: 180 Max. Heating temperature [°C]: 90/155 Connection power [kW]: 6.4 Cleaning agent tank [l]: 20 Hose length [m]: 10 Weight [kg]: 130 EQUIPMENT: NEW durable pressure gun from the German brand R+M NEW stainless steel pressure lance NEW reinforced 10m steel braided pressure hose NEW 25° power nozzle WATER FILTER AND GEKA CLAW COUPLINGS - FREE KEY FEATURES: Open oil system - no operating time limits Crjdpfx Ajxl Atzjddsk Built-in cleaning agent tank allows for dispensing cleaning agent directly through the machine Very clear and intuitive control panel Simple design and easy access to individual components under the housing make the machine user-friendly and easy to service Fluid tank RM110 water softener prevents corrosion and scale accumulation inside the heating coil and other pipes.

Condition: good (used), Compressed Air Line / Pressure Air Line Cedpfxjvv Nvno Adderk made of aluminium The stated price is for all compressed air pipes together. Total: approx. 325 m of pipe Sale / delivery of partial quantities is possible!

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: 30013012, 27.10 25: Machine currently in serial production. Shutdown planned for mid-2026. Please state your offer price. Sale only within Europe, including Turkey. ----- For technical data, see handout. Without packaging; any warranty rights are excluded. Should you wish to dismantle the system yourself, please indicate this in your bid. Crsdpfx Asth Sc Hoddjk We do not assume any liability for the accuracy of the technical data, the completeness of accessories and tool equipment, nor for compliance with all safety and environmental protection requirements as specified in accident prevention regulations.

Condition: good (used), machine/vehicle number: 2029, Printing press Boston Tiegel A4+ Hohner Tiegel, electric/with motor, machine number 2029, in good condition, immediately available. 2 machines available. If you are interested, we would be happy to inform you about other machines in our facility. You are welcome to inspect the machine at our premises by prior appointment. Codpfx Aexc Eucsddjrk

Condition: used, GENERAL Exchange surface: 0.99 m² Outer diameter: 200 mm Inner diameter: 86 mm Total length: 2,120 mm Insulation: available Other: Outer tube diameter approx. 10 mm Location: Bremen Nameplate: Condition: used Last application: pharmaceuticals INSULATION Insulation jacket material: stainless steel SHELL SIDE Shell side volume / liters: 7 liters TUBE SIDE Tube side volume / liters: 3 liters Shell material: AISI316 (V4A) 1.4571 Number of tubes: 20 Crjdpjxqchvefx Addjk Max. permissible operating overpressure shell side / bar: 6.0 bar Tube length / mm: 1,980 mm Tube diameter / mm: 8 mm Max. permissible operating temperature tube side / °C: 144°C Max. permissible operating overpressure tube side / bar: 7.0 bar

Condition: new, Year of construction: 2022, pressure 200 t stroke 400 mm table surface area Arbeitsbreite 1300 mm pressure 243 bar oil volume 64 dm³ ajustment speed 5,73 mm/sec work speed 1,84 mm/sec return speed 7,08 mm/sec total power requirement 3,0 kW weight of the machine ca. 1690 kg Inner diameter of the cylinder [mm]: 320 Codpst I D Thofx Adderk Piston rod diameter [mm]: 140 Diameter piston crown [mm]: 175 - adjustable cylinder (left-right) - Integrated pressure gauge - Pressure regulator - Two-speed hydraulic unit - Working table adjustable in height - Joystick to move the piston up / down - Hand pump for precision work - with digital display This 200 ton hydraulic press is equipped with a movable cylinder (left- right), a height-adjustable work table, a pressure regulator, 2 speeds, a joystick and a hand pump for precision pressing fitted.

Condition: excellent (used), functionality: fully functional, Year of construction: 2012, working width: 4,100 mm, pressing force: 220 t, working range: 4,100 mm, Model: Used Amada HFE M2 220t 4metre x 220ton, 8 axis Press Brake For Sale Hydraulic Down Stroke Year 2012 Tonnage 220 tonnes Max. Bend Length 4280 mm Stroke Length 200 mm Approach Speed 1 - 100 mm/sec Crjdpfx Aov Tdbgeddek Bending Speed 1 - 10 mm/sec Return Speed 1 - 100 mm/sec Oil Capacity 195L Motor Power Weight 17450 Kg Dimensions Machine Length 5070 mm Machine Depth 2075 mm Machine Height 3085 mm Distance Between Side Frames 3760mm Beam width 180 mm Table height 960 mm Open Height 470 mm Throat Depth 420 mm

Condition: good (used), Year of construction: 1992, functionality: fully functional, cutting height (max.): 130 mm, cutting length (max.): 400 mm, overall weight: 1,400 kg, Monitored saw blade cover; cuts at 90° profile height 130 mm and profile width 400 mm, Crjdpfx Adsxnzf Usdjk at 45° = 130 x 280 mm at 30° = 130 x 195 mm. Acute angle cutting at 30° right and left. - hydraulic material clamping vertically and horizontally - hydraulic stepless saw feed - clamping pressure adjustment - original Trennjaeger stops are available. .

Condition: used, Year of construction: 2014, functionality: fully functional, Lamella press 13 m x 1.6 m x 240 with 2 decks Codpfsxmvvlox Addork

Year of construction: 1999, condition: excellent (used), machine/vehicle number: 700571/99-280108, Working width max. (mm): 660 Crodpoixqb Sjfx Addsk

Year of construction: 2025, condition: new, The purpose of a compressed air refrigerant dryer is to lower the temperature of the compressed air and remove water and oil particles contained in the air flow. Refrigerant dryers are important in applications where moist air could cause corrosion, contamination or damage to tools, machinery or products. By removing moisture, the dryer increases the reliability and durability of compressed air systems. The refrigerant dryer is designed for maximum efficiency and durability. The main design elements include: 1. Air-to-air heat exchanger In the first stage of the process, the inlet air passes through a heat exchanger, where it is pre-cooled by the cooler air leaving the evaporator. By using countercurrent flow, heat recovery increases the energy efficiency of the entire system. Crsdpfxjmt Dbhe Addsk 2. Refrigeration system evaporator In the second stage, the compressed air is fed to the evaporator, where it is cooled to a dew point temperature of 3°C. This results in the condensation of water vapor and oil particles contained in it. 3. Condensate separator After cooling, the gas and condensate mixture is fed to an efficient separator, where the condensate is separated and automatically drained outside the device. 4. Fan control system The variable speed fan technology allows intelligent adjustment of the cooling intensity to the actual demand, which reduces energy consumption and increases the service life of the components. Technical parameters Inlet/outlet pipe diameter (BSP) 1" Maximum operating pressure 10 bar Maximum inlet air temperature ≤ 38°C Dew point temperature 3°C Efficiency 1500 l/min Power 0.58 kW Supply voltage 230 V Dimensions (L x W x H) 380 x 600 x 625 mm Weight 31 kg Type and amount of refrigerant R134a, 400 g The price given is a NET price. The price does not include transport costs. For more information, please contact us by phone or email. We invite you to familiarize yourself with the offer on our website.