Used Extraction System for sale (3,826)

Condition: used, Year of construction: 2015, operating hours: 424 h, type of input current: three-phase, overall weight: 1,000 kg, total width: 1,700 mm, total length: 1,650 mm, total height: 2,900 mm, suction capacity: 5,000 m³/h, filter area: 80 m², NOVUS Air FTower Filtration Tower, 5000 m³/h Industrial welding hall air filtration – suitable for various technological operations in manufacturing plants, primarily metalworking. Top air intake and draft-free bottom air discharge – delivers purified air directly to the workstations. Layered filtration and ventilation principle; the unit does not require duct installation. Cartridge filter inserts – self-cleaning via compressed air pulses during operation. Filter cleaning is controlled by pressure differential – ensures no loss of compressed air. Layered ventilation principle: contaminated air is drawn in from above, filtered, and released at floor level as breathing-quality air, free of drafts, at a velocity below 1.2 m/s – precisely where employees inhale it, covering a wide 270° range. The tower operates according to the layered ventilation method, recommended by trade associations and considered the optimal air circulation method. Dwjdjxg Nx Tspfx Addsf Year of manufacture: 2015 Operating hours: 424 h Specifications: — Fan power: 5.5 kW — Capacity: 5000 m³/h — Filtration surface area: 80 m² — Filter cartridges: 4 units — Additional final stage F9-class fine filter increases purification efficiency and further protects the fan in case of main filter damage. — 100-liter dust drawer — Very quiet operation: 75 dB(A) — Filtration efficiency: > 99.6 % The unit is in very good technical condition. Warehouse number: 1049

Condition: used, Year of construction: 2022, Technical data: Process: 2-stage Filter surface area: approx. 17 m² Separation efficiency: >99% Welding fume separation class: W3 Extraction capacity: 1100 m³/h Extraction arm diameter: 150 mm Extraction arm length: 3 m Power supply: 3 x 400 V Motor power: 1.1 kW Sound pressure level: 70 dB(A) Dimensions (approx.): 785 x 730 x 950 mm Weight (approx.): 106 kg Features: - Made in Germany Dwjdpfxjxbflrs Addef - Suitable for low to medium amounts of smoke/dust - Suitable for occasional to frequent use - Convenient filter replacement via service door - Extraction hood rotatable and pivotable by 360 degrees Equipment: - 3 new replacement main filters (approx. €330 each, new) - 7 new replacement pre-filters - 2 extraction hoods (one unused)

Condition: used, Year of construction: 1990, Motor power: 1 kW Dwsdpfxjwv Nbco Addof Filter area: 2500 mm x 1600 mm Exhaust connection: 300 mm Power consumption: 2.3 A Weight: approx. 120 kg

Condition: excellent (used), Unit with supply air heating in excellent condition Dodpfx Adexpg Dxodewf

Condition: used, No. 04491 Mobile extraction unit / Mobile dust extractor ESTA Dustomat HMS 10 WN Used For extracting wood dust and chips Filter type H2 for wood dust, residual dust content level 2, 0.2 mg/m3 Type 1, for extracting combustible dusts of dust explosion classes St 1 and St 2 400 V, 1.1 kW, with power cable and plug Nominal air volume flow 720 m3/h Filter area 3.5 m2 Extraction pipe connection diameter 100 mm Filter cleaning by hand crank Chip container 670 x 460 mm Mobile unit CE-compliant Transport dimensions approx. 1300 x 550 x 1700 mm LWH Weight approx. 100 kg To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale Djdpfexnqaujx Addewf For used machines, any warranty is excluded, the following applies: “sold as seen” Terms of payment: Prices excl. VAT, payment before collection or dispatch Terms of delivery: ex warehouse

Condition: used, This listing is for 1 of 4 Liferiver EX3600 Extraction System. The unit is in full working condition and is ready for immediate release. The Liferiver EX3600 is a cutting-edge, fully automated nucleic acid extraction system designed to enhance laboratory efficiency and convenience. Here’s a detailed overview of its standout features and applications: Key Features: - Versatile Sample Volume: The EX3600 can process a wide range of sample volumes, from 20 to 200 microliters, making it suitable for diverse applications and sample types. - High Throughput: Capable of handling up to 24 samples in a single run, the EX3600 significantly boosts productivity, particularly in high-demand research environments. - User-Friendly Interface: The integrated LCD screen provides clear, real-time monitoring of the extraction process, allowing users to easily track progress and make adjustments as needed. - UV Sterilization: Equipped with a UV lamp, the system ensures sterilization of the working area, which is crucial for preventing contamination and maintaining sample integrity. - Quick Processing Time: The entire nucleic acid extraction process takes approximately 20 minutes, enabling rapid turnaround for critical experiments, such as those in diagnostics or research settings. - Magnetic Bead Technology: Featuring a magnetic bar for efficient handling of magnetic beads, the EX3600 streamlines the extraction process, reducing manual intervention and minimizing errors. Applications: - Whole Blood and Plasma: Ideal for clinical applications, particularly in genetic testing or infectious disease diagnostics. - Serum Samples: Useful in biomarker discovery and research. - Cells: Supports cellular research and analysis. - Food Samples like Milk: Perfect for food safety testing and microbiological analysis. - Fecal Samples: Essential for studies in microbiome research or gastrointestinal health. - Specialized Use: Djdpfxjxxyf Io Addewf - The EX3600 is particularly effective for extracting viral RNA, making it a valuable tool in the fight against infectious diseases, including COVID-19 detection. Trained laboratory personnel can prepare samples before utilizing the automated system, ensuring consistent and reliable results.

Condition: used, Year of construction: 2014, filter area: 150 m², suction capacity: 15,000 m³/h, The WELDEX FT series of filtration towers has been specially designed for the efficient removal of welding fumes in production facilities. These units are primarily intended for extracting contaminated air during the welding of large or complex metal parts, where conventional fume extraction directly at the source is impractical. Fine particles are captured by M-class filter cartridges, and the filters are automatically cleaned during operation using a pulse jet of compressed air (pulse cleaning). The WELDEX FT filtration tower is positioned at the center of the workspace. Fume-laden ambient air is drawn in at the top of the unit from the surrounding area, filtered, and then returned to the hall draught-free through two side outlets. The three-section dust collection drawer gathers separated contaminants from both the pre-separator chamber and the filter compartment. Welding fume extraction for production halls (workplace ventilation systems) Ideal for all work areas where selective extraction is impractical: - Metal industry - Mechanical engineering - Automotive industry - Vehicle manufacturing - Aircraft construction - Shipbuilding - and many more High-performance welding fume extraction for manufacturing plants No need for ductwork installation Easy to install – ready for immediate use Durable, cleanable filter cartridges = low operating costs Efficient fume extraction using thermal lift from the welding process Compact design = minimal space required Flexible application = can be relocated at any time Brand: ESTA Model: WELDEX FT-150 Specifications: Motor power: 11 kW Capacity: up to 15,000 m3/h Vacuum: 2,000 Pa Filter surface area: 150 m2 Weight: 1,400 kg Year of manufacture: 2014 Dimensions: Width: 2.10 m x 1.40 m Djdpfxjxg Icke Addjwf Height: 3.65 m Stock no.: 1031

Condition: excellent (used), REF: MM5727 1 x Zumex Food Engineering juice extraction and flitration system with elevator. Manufactured completely in stainless steel. Technical specification ⚙️ ✅ Manufacturer - Zumex Food Engineering ✅ Model - Z450. ✅ Serial number - 454293.  ✅ Hopper capacity - 40 kg.  Dodpfxot Uircs Addjwf Performance Specification: Sizes     Head Unit     Oranges/MIN     KG/H     L/MIN     L/H 9-10-11     Kit 9     150,35     902,4      6,01     360,84 5-6-7-8     Kit 8     133,68     1145,4     7 ,64     458,22 2-3-4     Kit 7     116,94     2338,8     1 5,59     935,53 Estimated calculations with a 40% juice performance of the oranges. FRUIT DIAMETER: Minimum:Ø55mm, Maximum:Ø100mm NET/GROSS:  750/960KG DIMENSIONS (L x W x H):  2.5 x 1 x 2.2m CONSUMPTION:  2.010W VOLTAGE: 380 V / 50-60 Hz / 3 phase.

Condition: excellent (used), Year of construction: 2008, 1 x Oil Mist Extractor Keller Lufttechnik OENA-0.5-K-H11 Year of manufacture: 2008 In very good condition. The extraction unit can be inspected at our warehouse. Dwedpjxvrw Dsfx Addsf

Condition: used, Year of construction: 2014, Exhaust fan model: HERDING COMP 1500-8/9 SB – 4 identical units Year of production: 2014 good condition Dedpewu Dnbofx Addswf Price: 5,000 euros/unit

Condition: used, No. 04489 Mobile extraction unit / Mobile dust extractor ESTA Dustomat 61 Used For extracting wood dust and chips Filter type H2 for wood dust, residual dust content level 2, 0.2 mg/m3 Type 1, for extracting combustible dusts in zone 22 400 V, 3 kW, with power cable and plug Nominal air volume flow 1850 m3/h Extraction pipe connection diameter 160 mm Filter surface area 9.6 m2 Filter cleaning by hand crank Filter dimensions approx. 720 x 510 mm Chip container 860 x 570 mm Dwedexnprcopfx Addef Mobile unit CE-compliant Including new replacement filter Operating instructions available Transport dimensions approx. 1700 x 800 x 2100 mm LWH Weight approx. 250 kg To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Terms of payment: Prices excl. VAT, payment before collection or dispatch Terms of delivery: ex warehouse

Condition: ready for operation (used), One or two extraction units are for sale. Available individually or as a package. Originally, these systems were used for extraction in a welding workshop, but they can of course also be used in other workplaces. We look forward to your inquiry. Dodpfx Aexufkzoddswf

Condition: good (used), Dust extraction fan, extraction, dust blower, extraction system, dust blower, dust extraction device, welding fume filter, welding fume extraction, flue gas extraction fan, extraction filter system -Manufacturer:Oelde, extraction system, extraction filter system, type size 16 Dwoderyaliopfx Addof -Air flow: 22 m³/min -Engine: 1.85 kW -Speed: 2890 rpm -Individual components/technical data: see photos -Dimensions: 870/480/H1250 mm -Weight: 100 kg

Condition: good (used), Year of construction: 2016, machine/vehicle number: 160300045, Offer 25381 Technical Data - Upright model for filtering welding fumes and grinding dust, Dsdpfx Aexu Uzpeddswf - Torch and robotic extraction - Exhaust air can be directed either into the work area or outside - Stationary or semi-mobile installation - Air flow rate up to approx. 500 m³/h - Filtration according to filter class M, efficiency > 99% - Filter cartridges with a filter area of 10 m² - Cleaning system with rotating nozzles - Dust collection container, capacity 40 L - Compressed air connection - 4 x connection pipe NW 45 mm; 1 x connection pipe NW 100 mm - Electrical connection: 400 V / 5.5 kW - Required space: approx. W 1200 x H 1400 x D 700 mm - Weight: approx. 250 kg

Condition: used, Year of construction: 2012, machine/vehicle number: IntNr231316, Technical Data – Used LNS FOX IFS WS 500 Feature Specification Model FOX IFS WS 500 Year of manufacture 2012 Airflow capacity approx. 500 m³/h Motor power approx. 0.37 kW Voltage 400 V / 50 Hz (typical) Weight approx. 35 kg Dimensions approx. 465 × 500 × 1,145 mm (W x D x H) Filter stages 1. Prefilter F5 2. Centrifugal separator 3. Post filter F5 (optional: HEPA H13) Dedpfx Asxl U Dleddowf Filtration efficiency 99% at ≥ 1–2 µm (F9); optional HEPA 99.95% at ≥ 0.1 µm Noise level approx. 65 dB (similar to WS2 model) Accessories & Features • Compact design for mounting directly on or beside CNC machines • Stand for extraction • Three-stage filtration for efficient oil and emulsion mist separation • Cartridge filter can be retrofitted with HEPA kit • Easy maintenance, low-noise operation, and long-life filter elements Subject to alteration and error in the technical data and information, as well as prior sale!

Condition: excellent (used), Year of construction: 2021, operating hours: 10 h, functionality: fully functional, exhaust gas temperature (max.): 400 °C, Smoke Extraction Roof Fans from Stock Manufacturer: Nicotra-Gebhardt 2 units RDM 56-4550-4W-16 Airflow: 6,250 m³/h at 100 Pa Certified for 120 min at 400°C Motor power: 2.2 kW Voltage: 3-230/400V-50Hz Accessories: • Flat roof curb • Inlet nozzle • Inspection switch List price: €3,019 – 60% discount 1 unit RDM 56-5671-6W-21 Dsdexuwqgspfx Addjwf Airflow: 12,000 m³/h at 100 Pa Certified for 120 min at 400°C Motor power: 9 kW Voltage: 3-230/400V-50Hz Accessories: • Flat roof curb • Inlet nozzle • Inspection switch List price: €4,606 – 60% discount 1 unit RDM 56-3535-4W-10 Airflow: 2,050 m³/h at 100 Pa Certified for 120 min at 400°C Motor power: 0.55 kW Voltage: 3-230/400V-50Hz Accessories: • Flat roof curb • Inlet nozzle • Inspection switch List price: €2,213 – 60% discount 1 unit RDM 56-2528-2W-11 Airflow: 2,850 m³/h at 100 Pa Certified for 120 min at 400°C Motor power: 1.1 kW Voltage: 3x230/400V-50Hz Accessories: • Flat roof curb • Inlet nozzle • Inspection switch List price: €2,023 – 60% discount These as-new fans were initially installed but never operated. As the intended purpose was not achieved, the fans were removed again and are now palletized and ready for collection.

Year of construction: 2000, condition: good (used), Stock number: 2739 Manufacturer: TEKA Year of manufacture: 2000 Type: PP-DC Number: 201320 Volume flow: 320 m³/h Max. Negative pressure: 22.000 Pa Connection diameter: 50 mm Djdemf Uzxopfx Addjwf Equipment: mobile, portable Accessories: hose 3.000 mm Connection: 1.2 kW 230 V Weight: approx. 40 kg Dimensions: 300 x 300 x 850 mm without hose

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: 12641245, type of input current: three-phase, overall weight: 82 kg, input voltage: 230 V, volume flow: 600 m³/h, noise level: 73 dB, space requirement width: 770 mm, space requirement length: 1,145 mm, input frequency: 50 Hz, Equipment: type plate available, The FilterCart Carbon mobile filter unit is specially designed for odor removal. The FilterCart Carbon includes the standard extraction arm and can optionally be equipped with a HEPA filter. Applications: Solvents, smoke, and other gas contaminants. Condition: Slight signs of wear (minor damage to the PVC hose – see image), as the mobile filter unit was only used a few times as a demonstration unit. Dedswfrggopfx Addewf Product Description • Durable disposable filter with a large filter surface • Ready for immediate use • Filter housing with clamping lever lock • Robust chassis with 2 swivel casters and 2 fixed wheels • Easy to maneuver Protection class: IP42 Material: Rotationally molded plastic housing. Extraction arm made of PVC hose and aluminum rods. Fan made of steel and aluminum. Extraction arm diameter: 160 mm Arm length: 2 m Filter material: Activated carbon

Condition: good (used), Radial fan, dust extraction fan, fan, extraction, dust blower, blower, exhaust fan -Dust extraction fan: radial fan -Motor: Dietz 3.0 kW 1420 rpm -Fan wheel: Ø 590 x 160 mm Dedpfx Ajv E D E Noddswf -Volume flow: m³/h -Dimensions: 790/710/H790 mm -Weight: 104 kg

Condition: new, We would like to introduce a program extension: Mestorm filter for machine tools – manufactured in Europe! The Mestorm Solution Extractor has been developed to effectively remove dust and debris generated during metalworking, ensuring a clean and safe working environment. Thanks to three different sizes and variable performance, it can be adapted to various types of CNC machines used in the metalworking industry. Filter replacement monitoring via smartphone! Dedpfx Aexu An Rsddewf

Condition: good (used), Motor : 1.5 kW Quantity : 2 pieces Price/ piece Dwsdpfxohc Sypj Addef

Condition: used, Year of construction: 2025, A device for extracting aluminum chips and shavings (not aluminum dust), steel from machines and cleaning the workplace. The use of a side turbine makes the device ideal for connecting to machines where a large amount of chips is produced. It is equipped with a dust filter and a container (drawer) for pouring out the by-product. Machine characteristics Quick and easy filter replacement Large container for chips and shavings Quick access to the collection container Stably standing, compact housing Large container capacity Effective extraction Technical data ENGINE 0.75 kW VOLTAGE 400 V / 50 Hz SUCTION CONNECTIONS 1 x 100 mm EXTRACTION CAPACITY WITHOUT BAG 1800 m³/h EXTRACTION CAPACITY WITH BAG 1520 m³/h ROTOR DIAMETER 350 mm DIMENSIONS 870 x 560 x 1170 mm Dodpfx Adewl Dn Ajdswf WEIGHT 31 kg MACHINE USED: RETURNED, REPAINTED, VISIBLE SIGNS OF PAINT, 100% OPERATIONAL

Year of construction: 2017, condition: excellent (used), Stock number: 2727 Manufacturer: ESTA Year of manufacture: 2017 Type: KAF 100 Number: 16002366 Volume flow: 700 m³/h Max. Negative pressure: 1.100 Pa Connection diameter: 50 mm Equipment: mobile Accessories: see picture, among others laboratory suction arm connection: 0,55 kW 230 V Dodpjlt Uinofx Addjwf Weight: 42 kg Dimensions: 485 x 485 x 920 mm without hose

Condition: used, This listing is for the BioBase BNP32/BNP48 Nucleic Acid Extraction System The unit is in full working condition and is ready for immediate use The BNP32/BNP48 system is a fully automated clinical nucleic acid extraction platform that delivers walk-away automation, designed to minimize user intervention and reduce extraction-to-extraction variability. Ideal for both clinical and research settings, it ensures consistent performance and high-quality purified eluates. Djdpfexv Dl Hex Addswf In addition to efficient nucleic acid extraction, the system offers: Onboard primary-sample handling Mixed-batch sampling Support for up to 32 or 48 samples per run, depending on the model Key Features Sample Capacity: Up to 32 (BNP32) or 48 (BNP48) samples per run Sample Volume: 20–500 µL per sample Processing Volume: 60–1000 µL Extraction Time: 8–60 minutes per round, depending on reagents Magnetic Bead Recovery: Greater than 98% Reagent Compatibility: Open system compatible with magnetic bead-based reagents Temperature Control: 8 independent heating modules with customizable lysis/elution temperatures Mixing Modes: Oscillating mixing (low/medium/high speeds) Program Storage: Stores up to 50,000 programs; USB import/export supported Touch Screen: 7-inch user-friendly interface Safety Features: Auto-pause on door opening, resumes upon closure

Year of construction: 1997, condition: good (used), Type: NI3500 Ex Number: 97195 Power: 2 kW Capacity; 3.500 m³/h Footprint: 750 x 950 mm Dedpfx Adjhk Emiedswf Extraction nozzle top: 300 mm Suction nozzle bottom: 120 mm Dimensions: 750 x 950 x 1.250 mm Weight: 250 kg