Used Extruders for sale (388)

Year of construction: 2006, condition: good (used), Designed for COEX- castfoil production with additional coating unit. The extrusion part of the line has 2 extruders; the coating unit has 1 extruder. Processing of thermo plastics in a temperature range of 90-300°C. Different combinations of production are possible: - main unit (CoEx) with coating 
 - main extruder (CoEx) without coating 
 - coating processing over winding unit on an existing base film 
 For production in the different described combinations you can lock the not necessary equipment parts. 
 POSSIBLE LAYER STRUCTURES: Main extruder: - Mono film if necessary with tensilized film 
 - 3- layer film (A-B-A) if necessary with tensilized film 
Coating unit: 
 - mono film on excisting base film if necessary with second tensilized film Isdpfx Aajpaiaisbobc Unwind diameter: max. 1.000 mm Allowed roll/bobbin weight: max1.500kg

Condition: ready for operation (used), One complete and one partially dismantled extruder system Davis are available. 1) Davis Standard DS-25, power: 6385W, max. melt pressure: 700bar, max. temperature: 315°C. Including 4x screws, 6x bursting discs, Digicolor dryer, platform, screen changer with heating and sealing pack, new cylinder, 3x screw seals, and spare drive motor. 2) Davis Standard DS-20, power: 4500W, max. operating pressure: 700kg/cm², max. temperature: 315°C. Including Conair dryer, 3x screws, screen changer with heating and sealing pack, cast housing, extrusion tool, and spare drive motor. General accessories: various ring heaters, 3x Eurotherm temperature controllers, and 3x Eurotherm pressure sensors. Documentation available. An on-site inspection is possible. Iedoxn S Umopfx Aabjbc

Condition: used, The HERBOLD Plastkompaktor is a system for agglomerating films, fibres, chips, dust and flakes. Poorly free-flowing waste is transformed into an agglomerate with a high bulk density and good flowability, which can therefore be fed directly into extruders and injection moulding machines. The system for sale has a main motor with 110 kW drive power and a throughput of 600 to 2000 kg/h depending on the feed material. All thermoplastics can be processed, even sensitive materials such as PET, PA and bioplastics can be agglomerated without thermal damage or discolouration. The system consists of the feeding device with silo, the compactor, a secondary granulator with sifting and fines return. On request, pre-shredding can be offered that is customised to the task at hand Trials can be carried out in our technical centre for suitability tests and sampling. We are the manufacturer of this system and can guarantee service and spare parts supply. Ibsdsxgtx Depfx Aabjc The system is available at short notice!

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, ID BYP01 We sell a used Chinese - PP melt-blown fabric extrusion line for melt blown, make: Zhangjiagang Sevenstars Machinery Co., Ltd., MFG 2020. It was used for a short time. excellent condition. All EU import duties have been paid. Output max 400 kg per 24 hours. General description: 1. Product size: PP melt blown fabric with width at 600mm (after trimming 17m*3) 2. Main Material: PP compounding material 3. Extruder type: SJ65/33 single screw extruder 4. Output capacity: 350-400kg/24hour 5. Electric power supply: 3phase, 380V; 50Hz 6. Additional equipment: • Vacuum feeder • Raw material dryer • Mesh manual filter • T-mould for melt blown fabric • Static electrical discharge equipment • Belt type forming 850mm • Collecting device • Winder and slitting Model L/D Output Speed of Screw Rotationl Power Center Height SJ-65 10-33 80-150kg/h 20-120r/min 18.5kw 1000mm This line contains the following machines: Automacic vacuum loader ZJ-400 and hopper dryer make RHONG model RDM-25, MFG 2020; Single screw extruder, model SJ65/33, MFG 2020; Heating oven for hot air, model HJGF101-4, MFG 2020; Extrusion T-mold, model: SUS630, made in Japan, MFG 2020; Forming device, MFG 2020; Winder & slitting system, MFG 2020; Oil free air compressor, MFG 2020; The PP melt blown nonwoven production line is a polymer melt extruded from a screw extruder. The polymer is extremely stretched by high-speed hot air or other means to form very fine short fibers, which are aggregated to A web is formed on a roller or a screen curtain, and is finally reinforced by self-adhesion or thermal bonding. Its unique properties are widely used in mask filter materials, thermal insulation filling materials, medical health materials, wiping materials, etc. The finished product can pass the N95 standard as the core material of the mask. Process of melt blown nonwoven production line Polymer preparation --- Melt extrusion --- Metering pump --- Melt blown die head assembly --- Solution thin-flow drawing --- Fibber cooling --- Auxiliary network --- Electrostatic electret --- Reinforced finished product. Melt-blown cloth is produced by melt-blown process. The equipment mainly includes: screw extruder, melt pump, screen changer, melt-blown device, winding device, air system (hot air blower and heater), etc. The function of the screw extruder is to melt the slice material; the role of the melt pump is to accurately measure, control the output and the fineness of the fiber, and continuously and evenly transfer the melt to the spinneret. The function of the screen changer is to filter out impurities in the melt so as not to block the spinneret holes. The function of the winding device is to pack the melt blown cloth into rolls. The function of the air system (hot air blower and heater) is to provide the temperature and pressure of the hot air used in the drawing of the spinning air stream. Price Euro 39.200 Euro + VAT, negotiable, FCA: Oradea / Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana Ibodpfouiq Dhsx Aabec

Year of construction: 1991, condition: ready for operation (used), description Twin screw extruder: scews conical Application: PVC profile/pipe Manufacturer: Krauss Maffei Type: KMD-50-KK Year of construction: 1991 Processing unit: conical for profiles or tubes Ijdpfxoidmums Aabsbc Screw diameter: 50 Screw speed: 5.0 - 50.0 rpm. Motor power: 30.0 kW Digital temperature controllers: 11 Cylinder heaters 5/cooling zones: 2 x air cooling fan Adapter heating zones: 1 Tool heating zones: 6 Output capacity: approx. 180 kg/h for PVC profiles/pipe Connection value: max. Accessories: auger dosing and material hopper Dimensions: approx. 2400 x 1300 x1900 mm (LxWxH) Weight: approx. 1550 kg

Year of construction: 2023, condition: like new (used), Our compact extruder model EX20-25d Manufacturer: PMH GmbH Screw diameter [mm] 20 Screw length [L/D] 25 Screw speed [min-1] 10-192 Screw nitrided Torque 55Nm Drive Three-phase drive with frequency converter Drive power [kW] 1.1kW Barrel material: nitrided Ibedjq R Tkwepfx Aabec Electrical connection values 3 / N / PE Supply voltage [V] 400V at 50 Hz Control voltage [V] 24V Ceramic heating tapes [W] 1200W Number of heating tapes 3 Max. Output approx. 5kg/h Max. Processing temperature [°C] 300

Condition: excellent (used), functionality: fully functional, Year of construction: 2016, operating hours: 4,000 h, total length: 775 mm, total height: 1,135 mm, type of input current: AC, overall weight: 110 kg, Sale due to non-use, large format industrial multi-nozzle hot chamber 3D printer with a print volume of 600x325x500 mm with active chamber heating and 3 extruders. The printer is in perfect working order, has been completely overhauled less than 6 months ago and has new nozzles, new wire motors and updated firmware. Complete with trolley and Hepa filter, additional spare parts and proprietary material included in the offer (approximately 8kg) We remain at your disposal for further information. Ibodpfx Asv Td Nkeabjc

Condition: like new (used), Rondo line for thin pastry, was set up to produce thin pastry to manufacture samosas but can be used for any fine pastry manufacture. Starts with elevated conveyor, 6 roll dough extruder 650mm wide, various 700mm wide conveyors with guillotines and dusters. Was set up to cut the pastry into 75 x 173mm 8 across, 90 x 213mm 7 across and 110 x 254mm 5 across. We would need to check first if all the sizes are here, not confirmed, just read from the order form. Lins is approx 22m long. All belts have perished, this has been in safe storage for many years as it could not be sold to competitors in the UK. Iodpfx Aeh Rwlfoabjbc

Year of construction: 2010, condition: used, Designed for COEX cast film production. Processing of thermoplastics within a temperature range of 150–300°C. The system can be operated with the following configurations: - Main unit (CoEx system) from Kuhne POSSIBLE LAYER STRUCTURES: - Monofilm - 3-layer film (A-B-A) MAIN EXTRUSION SYSTEM FROM KUHNE Isdpfx Aasxl Uh Debobc Total system output: max. 900 kg / h Main extruder: 105/33 L/D, max. 650 kg / h Co-extruder: 90/33 L/D, max. 250 kg / h Net film width: 800–1400 mm Thickness: 25–530 µm Production speed: 8–150 m/min Roller width: 1600 mm Max. roll weight: 2000 kg Version with air knife and vacuum box One gravimetric dosing unit with 3 stations per extruder Each extruder equipped with melt pump and 2-piston screen changer ADDITIONAL COMPONENTS (QUALITY): Non-contact thickness gauge for automatic die with automatic transverse profile control; Beta Controll Corona pretreatment on both sides (also selectable for one side; max. 6,000 W) by AFS WINDING UNIT FROM “SML Co.” Automatic turret winder with automatic splicing Max. finished film width: 1600 mm Max. winding diameter: 1000 mm Turret winder for 6" winding shafts

Condition: used, Used Wenger X-175 single screw extruder with capacity 5-6 tonnes/hour when producing pet food. Driven by ABB el. motor 200kW engine, has 5 barrels with steam / water circulation. Also includes Unimont double rotor stainless steel conditionner and number of different dies. Ibjdpfx Aajuk Eb Ssbec

Year of construction: 2008, operating hours: 75,559 h, condition: ready for operation (used), Main Drive Spindle motor power 200.2 kW Injection Unit Screw diameter 75 mm Additional Equipment Connection to Measuring System: Connection for connection to INDEX wall thickness measurement Equipment for tool zones: EURO socket CEE 32 A - 6 H / 250 V, 3-pole blue Central main power supply Main Drive Spindle motor power 200.2 kW Injection Unit Screw diameter 75 mm Additional Equipment Connection to Measuring System: Connection for connection to INDEX wall thickness measurement Equipment for tool zones: EURO socket CEE 32 A - 6 H / 250 V, 3-pole blue Central main power supply Ibsdpow Spt Nsfx Aaboc This Krauss Maffei KME 75-36 R AC single screw extruder was manufactured in 2008. It features a KM-GM 750 control integration with meter weight and mass throughput control, and a capacity of up to 750 kg/h granulate. The machine includes a connection for INDEX wall thickness measurement and is equipped with a EURO socket CEE 32 A - 6 H / 250 V. Contact us for more information about this machine. Application Types Extrusion

Year of construction: 1993, condition: good (used), functionality: fully functional, used REIFENHÄUSER single-screw extruder with screw size : diameter 50 mm x 33v grooved feed zone and degassing zone type RH 241-1-50-30v Ijdpfxepy Eygs Aabsbc with DC-drive 30,2 kW year 1993 with installed switch cabinet Fully functional

Year of construction: 2020, condition: new, Feeding for granulate and powder Ibodpfx Aaefmn Ufjbec

Condition: excellent (used), functionality: fully functional, Year of construction: 2021, operating hours: 250 h, Since 2021 for customer prints, product demonstrations and trade fair appearances in our possession. Completely ready for use and prepared by manufacturer-certified personnel from IGO3D, Desktop Metal Partner. Can be demonstrated in Hanover, Germany (also remotely via video call). Easy-to-use Additive Manufacturing 2.0 solutions for industrial production — delivering transformative value. Office-friendly metal 3D printing with two steps (Print > Sinter) and eight materials. Key benefits: „ Easy, two-step processing „ User-friendly software-controlled workflow „ Patented smart Separable SupportsTM technology for quick post-processing „ Qualified for eight materials „ Designed for office-friendly printing „ A trusted system used worldwide with success The easy-to-use Studio System leverages proprietary Bound Metal Deposition™ (BMD), an extrusion-based metal additive manufacturing process where metal rods — metal powder held together by wax and polymer binder — are heated and extruded onto the build plate, shaping a part layer by layer. Once printed, the binder is removed via the debind process, and then sintered, causing the metal particles to densify. The Studio System 2 is even easier to use than ever before with new material formulations allowing printed parts to be placed directly into the furnace without the need for a solvent debind. The result is a streamlined two-step process with a nearly hands-free experience. Eight materials are available, including a range of steels, copper, and nickel and titanium alloys. Iedpfx Ajm Rgzaoabobc Simplified metal part production using safe-to-handle bound metal rods The Desktop Metal Studio system creates metal parts for functional prototypes, tooling, jigs and fixtures, and low-volume production applications with expert metallurgy built-in. Easily produce difficult-to-machine parts featuring complex geometries like undercuts and internal channels to optimize metal components in an office setting.

Year of construction: 2009, condition: excellent (used), functionality: fully functional, machine/vehicle number: P251001170, Complete extrusion line for ABS/PP furniture edge banding from the renowned brand AMUT The line is in perfect technical condition, regularly serviced, and currently in operation. The set includes a spare screw, further enhancing its operational value. Line equipment: 1. AMUT EA 100 extruder Isdjxiu Npepfx Aabobc 2. AMUT calender station with CLV 1200 roller conveyor 3. AMUT TRK 100 edge banding machine 4. AMUT edge winder 5. Calendar cooling unit with a complete set of hoses 6. Electrical control cabinets for the entire line Material: ABS, PP (virgin + regrind) Working width: 700 mm (after side trimming) Nominal width: 1000 mm Thickness range: 0.5 – 2 mm Extruder: single-screw AMUT EA100 33D Extruder output: ABS: 320 kg/h PP: 350 kg/h Final product: 2 rolls, each 350 mm wide Line speed: up to 25 m/min Year of production: 2009 Technical condition: perfect, complete with spare screw

Condition: ready for operation (used), Year of construction: 1998, screw diameter: 85 mm, Complete extrusion line. Individual components can also be offered on request. The line has been used for making tubes from PP filled with chalk and barium sulfate. Components: - 4 Components Colortronic dosing (new controller in 2017) - Berstorff KMC 85/2 (screws renewed in 2019) - Sidefeeder - Complete control of dosing and extruder - Single oil tempering - Stomach melting pump - Krausmaffei Extrusion head 40 to 160 mm (with various sets) - Vacuum tank Battenfeld V250VA - Spray bath K250 VA Battenfeld - Pulling mechanism C250 - 4 Sica Ibodpfsu Rda Isx Aabjc - Saw CCM 32/170-2 Roller pole - Tilting table Battenfeld

Condition: new, Year of construction: 2025, functionality: fully functional, power: 198 kW (269.20 HP), Plastic squeeze dryers / Agglomerators are a vital part of plastic film washing lines. Washed films retain up to 40% moisture normally after exiting the wash process. High humidity will be affecting the efficiency and production of the following extrusion pelletizing process. Having a plastic squeeze dryer/Agglomerator is a must to dehydrate the washed film and increase the density of recycled film and fibre material. This also will increase the capacity of the extrusion process and further refine the quality of final plastic pellets. Ibsdpjwg Sgcsfx Aabjc Even the water-washed plastic film processed through a spin-dryer still contains over 10% moisture which would be uneconomic to agglomerate on a conventional batch agglomerator. By redusing the moisture so significantly the productivity of the extruder and quality of pellets is increased exponentially. The latest development for drying and simultaneously agglomerating washed film are plastic film squeeze dryers which could reduce moisture to the minimum and the resultant squeezed material only contains maximum 3%, and more usually 1%, residual moisture. Much cheaper to operate than hot air drying where materials are still in lightweight flake form, and better result as the output materials are continuously agglomerated direct from washing lines with +40% fluids on entry to the dryer, to output dense free flowing agglomerate. In this form it is not necessary to have cutter compactor extruders saving more energy, as the materials are so dry and dense they can be fed direct to extruders for pellet production. With over 30 years of producing recycling dryers and extruders GENIUS have sold more than 600 of these driers to the plastics recycling market. ..There are 4 models in the range with production between 250 kgs per hour up to 1200 kgs per hour.

Year of construction: 2024, condition: new, functionality: fully functional, Fixed table Vertical casting direction Pneumatic clamping unit with 19 kN closing force System details: Year of manufacture: Late 2024, but never went into series production Equipped with 2 vertical nozzles Induction equipment from Ambrell is included but optional for use Extruder/tank unit and cooling devices shown in the image are not included – these were returned to Optimel Two-hand operation for safety Pressure monitoring system Data interface with OPC/UA protocol Iedpfx Asxgnxxsabsbc

Condition: ready for operation (used), Plant Liquidation – Complete Equipment for Tire Retreading For sale is a comprehensive production line for tire retreading, ideally suited for businesses specializing in tire renewal. ⸻ Machinery & Equipment • Buffing/Rasping Machine: Tread and casing preparation (roughening and buffing) • Repair/Skiving Station: Grinding and patching • Extruder/Filling Unit: Cushion gum processing • Cementing/Adhesive Station • Building/Banding Station: For precured tread application • Envelope/Vacuum Station: Envelope and sealing operations • Autoclave including accessories (tire rings, vacuum pump, pipelines, carts) Additional Workstations: • Casing Spreader / Inspection stand • Pressure & Leak Test Station • Final Inspection (Tread and Sidewall Check) Plant & Auxiliary Equipment: • Compressors (Kaeser & Atlas Copco brands) • Extraction and dust removal system at grinding stations • Tire and material carts, shelving units • Tool and small parts set (valves, gaskets, clamps) • Transport and cooling racks • Various vulcanization and operating accessories Documentation: Photos, parts list, and additional documents available on request ⸻ Condition & Delivery • Used, fully operational • Inspection possible at any time • Accessories available • Dismantling, loading, and shipment easily arranged • Shipping via freight forwarder possible ⸻ Contact Maschinenhandel Nord Gerstenstraße 2 17034 Neubrandenburg 📞 All prices net, plus 19% VAT. Subject to change and errors excepted. Ibedjxk Tuaepfx Aabjc

Condition: used, Perry is offering a high quality used Winkworth model ZX190-9 stainless steel mixer / extruder. Manufacturer: Winkworth Ibedpexgfttsfx Aabsc Material: Stainless steel Year of Manufacture: 2018 Capacity: 190 litre (product dependent) Type Of Blades: (2) stainless steel masticator blade shafts Motor: 11kw motor & gearboxes Also Includes: main electrical control panel - Separate ICS model i-Temp ci 90t 18 heating/cooling unit. - External jacket rated 3.5 bar design pressure at 250 deg.c. - Top mounted Coperion model P30-BV-150 vacuum sequencing receiver with rotary lock valve. This unit is ready to run. A video of this mixer is available below.

Year of construction: 2007, condition: ready for operation (used), General Data Machine weight 5000 kg Injection Unit Screw diameter 61.6 Additional Equipment Dryer Feeder Strand chute Granulator This Leistritz ZSE 60MAXX-44D was manufactured in 2007. A twin screw extruder with a screw diameter of 61.6 mm and a high torque capacity of up to 3750 Nm, it offers up to 50% higher throughput potential than earlier models. Ideal for applications in plastics compounding and pharmaceutical extrusion. Consider the opportunity to buy this Leistritz ZSE 60MAXX-44D twin screw extruder. Contact us for more information about this machine. Application Types Extrusion Ijdjxcqm Repfx Aabsbc

Condition: like new (used), For sale is a lot of high-quality aluminum industrial profiles with large cross-sections. The profiles are as new & unused, making them ideal for applications in mechanical and plant engineering, fixture construction, frame building, or hall construction. Technical data: Quantity: 30 pieces of 5.27 m each + 1 piece of 4.04 m Cross-section: 130 mm x 50 mm Total length: 161.14 m Material: aluminum extruded profiles Total weight: approx. 725 kg Profile type: T-slot profile / construction profile / industrial profile (solid, multi-chamber) Isdpfoxbyx Hex Aabebc Features: Highly stable and torsion-resistant Lightweight and easy to process Corrosion-resistant Ideal for load-bearing structures Condition: As new / unused Minor storage marks possible Logistics: Goods bundled on pallets Collection by arrangement possible Shipping available on request for an additional charge

Year of construction: 2017, condition: used, GORRERI – Fully Automatic Sponge Cake & Swiss Roll Production Line – 500 kg/h Products & Capacities: - Small Layer Cakes – 14,000 pcs/h – 38×80×H25 mm - Mini Rolls – 9,600 pcs/h – ø30+35×80 mm - Swiss Rolls – 2,000 pcs/h – ø65+35×70×160 mm Included Machines & Modules: - Combined Pre-mixer & Turbo-mixer Unit (GMG500) - Water Chiller with Piping - Sponge Roll Dough Extruder (ERG600) - Tunnel Oven, Cyclothermic, 16 m × 0.6 m (Silver TC, 2 zones) - Cooling Conveyor with Wire Mesh Belt (NRG600 – 24 m) - Biscuit Working Conveyor (BLPG600 – 16 m) - Acceleration Conveyor (NAG600) - Longitudinal Cutter (TLG600) - Syrup Dosing Unit (DIBG600) - Jam Pump (PMG600) - Jam Extruder (EMG600) - Cream Dosing Unit (ECG600) - Layer Cake Overlapping Unit (GVG600) - Guillotine Cutter (TGVG600 – double vibrating blade) - Mini Roll Forming Device (AMRG04 – 4 lanes) - Swiss Roll Forming Device (ASRG02 – 2 lanes) - 180° Curve Conveyor - Electrical Control Cabinet with Control Panel - Chocolate Coating & Cooling: - Chocolate Tank 1,000 kg with Agitator, Pump, Heater & Filter - Enrobing Machine (ENROBMATIC600) - Cooling Tunnel (THERMOMATIC600 – 20 m, fully insulated, Frascold compressor) Connections & Requirements: Iodpfx Aoxc E D Reabjbc - Power supply: 220V 1Ph + 380V 3Ph / 50Hz - Compressed air: 6 bar, dry & oil-free - Ambient conditions: +5°C to +32°C, 30–70% r. h., max. 2,000 m a.s.l.

Condition: excellent (used), Year of construction: 1997, operating hours: 110 h, The machine was located at a university and used exclusively for teaching purposes. It was in use for only 110 hours. Name: Twin-screw laboratory extruder Manufacturer: Leistritz Extrusionstechnik GmbH Type: MICRO 27 GL / 32D Year built: 1997 Ijdpfjxlpzfsx Aabjbc Speed: 400 rpm Operating voltage: Electrical connection values: 400V, 50Hz Control voltage: 230V Hours of operation: 110 hours Driving force: 8,4 kW, Input speed: 2200 rpm Dimensions: Extrusion height: 1050 mm Length: approx. 2500 mm Width: approx. 800 mm Height with control panel: approx. 1900 mm Total weight of the extruder: approx. 950 kg. Technical doc.: Yes Message: Screw diameter: 27 mm, Screw length: 32 D, Screw flight depth: 4.3 mm, Screw rotation direction: co-rotating / counter-rotating, Screw speed range: 10 - 400 rpm, Total screw torque: 200 Nm, Screw back pressure (continuous operation): max. 200 ba,r Gear ratio: i = 5.38 Accessories: Dosing machine, nozzle hop / LSA tool, vacuum unit, temperature control unit, cooling belt (stainless steel version), Strand pelletizer, granulator, profile downstream. Condition: Used very good Price: By request

Condition: like new (used), Year of construction: 2024, operating hours: 200 h, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, total length: 2,700 mm, I offer a new machine for large format thermoplastic solutions for 3D printing. Control: Stäubli / Cead - Profinet full controll Robot: Stäubli TX200L - reach 2700 mm, load capacity 100kg Extruder: Cead E25 with a flow rate of 12kg/h Iodpfxeurvzrs Aabsbc Dryer VIZMATEC 100l plus automatic dosing for continuous production. G-CODE / NC code is used to generate the robot trajectory.