Used Extrusion for sale (314)

Year of construction: 2006, condition: good (used), Designed for COEX- castfoil production with additional coating unit. The extrusion part of the line has 2 extruders; the coating unit has 1 extruder. Processing of thermo plastics in a temperature range of 90-300°C. Different combinations of production are possible: - main unit (CoEx) with coating 
 - main extruder (CoEx) without coating 
 - coating processing over winding unit on an existing base film 
 For production in the different described combinations you can lock the not necessary equipment parts. 
 POSSIBLE LAYER STRUCTURES: Main extruder: - Mono film if necessary with tensilized film 
 - 3- layer film (A-B-A) if necessary with tensilized film 
Coating unit: 
 - mono film on excisting base film if necessary with second tensilized film Cgedpfx Ajpaiaiogkop Unwind diameter: max. 1.000 mm Allowed roll/bobbin weight: max1.500kg

Year of construction: 2011, condition: good (used), The extrusion line No. 1 was designed for cast film production. Processing of thermo plastics in a temperature range of 150-300°C. POSSIBLE LAYER STRUCTURES: - mono film
 - 3- layer (A-B+C-A) - 5- layer (A-B-C-B-A) DATA OF FACILITY Total output of extruders max. 2230 kg/h Extruder A: 90/33 L/D max. 330 kg/h Extruder B.: 135/33 L/D max. 950 kg/h Extruder C.: 135/33 L/D max. 950 kg/h Film width range (net): 1600 - 2110 mm Two rolls cutting possible (2x 800 – 2x 1055mm) Thickness range: 25-580μm Production speed: 10 - 150m/min Roll width: 2500 mm Max. roll weight: 2000kg Cedpfxepah U Te Agkegp ADDITIONAL COMPONENTS (QUALITY): Non-contact thickness equipment for automatic TD profile measurement with double side corona treatment (max. 12000W) Optical inspection system, including marker system if failures are detected, incident and transmitted light system INFRA STRUCTURE (ADDITIONAL UNITS): Dryer 1 – 4 with 4500-liter volume; heating capacity 48kw
 Dryer 5 with 2500-liter volume; heating capacity 20kw
 Dryer 6 with 1500-liter volume; heating capacity 15kw
 Each extruder has a gravimetrical batch-dosing unit with 3 stations. Each extruder has a melting pump and a 2-piston filter change system. MAIN LINE COMPONENTS MANUFACTURERS: SML: extruder; Chair, rollers, winding device GWK: cooling extruder KREYENBORG: screen changer Cloeren: feed block, slot die PIOVAN: dryer, dosing device SERVE: Edge band cutting device MATHO: suction RAPID: Edge strip shredder KONGSHILDE: Recyling edge strips, start rollers INFSTAUB: filling station SMK: chillers SIEMENS: control OCS: camera system SEMET: labeling system AFS: Corona Sation BETA CONTROLL: Radiometric thickness measurement SML: autom. FYLING SPLICE winding unit, BECKOFF control SIMCO: antistatic ALTEK: automatic roll manipulator (transfer carriage)

Condition: used, Year of construction: 1994, Film width: 1500 mm Thickness range: 25-200 Dosing system: Summit Garvimetric Screw: 90 mm Heating zones: 5 Heating power: 64 kWt approx. Driving system: D.C.11-110 KW Power: 415 Die head: fixed Diameter die head: 350mm Diameter of the gap: 1.25 to 2.25 IBC – yes Air ring type: optifil Die lip gap diameter: 2-50 Calibrating basket: yes with Ultrasonic control Motorized adjusting of calibrating basket in diameter / high: yes Take-off system: Oscillating Number of rolls: 2 Web guiding system: Yes Cgedpfewgcw Sjx Agkop Final roll width: 1650 mm Final roll diameter: 1000 mm Final roll maximum weight: 1 t Rewinder speed: 100 Thickness Control System: Optifil Micro perforator: no Filter changer: Yes(hydraulic) Electrical requirements: 400 A PLC: Siemens Simatic S5-100 U Trim removal system: Rollers Yes-Extract No

Condition: like new (used), functionality: fully functional, Roller shutter - extrusion die set - complete, die head with heating element and calibration tool * die connection currently for Weber CE7 but other mounts available on request - double strand 2x 5m/min Cjdpfxjxgpbbe Agkegp - roller shutter cover width 52mm - fully retracted - includes mounting plate (as shown) to fit on calibration table

Condition: new, functionality: fully functional, Year of construction: 2022, Complete extrusion line for the production of PVC shrink film, specifically designed for sleeve-label applications. Built in 2022 by RL Plastproject (Italy), the machine is brand new, never installed, and immediately available. Technical Specifications: Codpjw Ahfgjfx Agksgp Product: PVC shrink film for sleeves Material: Rigid PVC dry blend Extruder: Single-screw with venting and gravimetric dosing Output: approx. 180–200 kg/h Film thickness: 40–80 micron Usable film width: up to 620 mm Die width: 900 mm Line speed: up to 60 m/min (depending on film) Cooling: Calender with chill roll Orientation: Transverse shrink forming unit Corona treater: Integrated Winding: Dual-position slitter-rewinder Control system: Siemens PLC with touchscreen HMI Installed power: ~220 kW (to be confirmed) Air requirement: 6 bar Footprint: approx. 25 x 6 meters

Year of construction: 2007, condition: excellent (used), EXTRUDEX EXTRUDER EN50-30D year 2007 no. 4101264, with melt pump, screen changer and 5 layer pipe head Year of manufacture 2007 As well as 4 co-extruders EXTRUDEX EN25-25D, year of manufacture 2007 APPLICATION: Production of PE 5 layer pipes Cjdpfx Agovyaxuekjgp Max diameter 32 mm INVENTORY: 1 single-screw main extruder EN 50 4 co-extruders single-screw auxiliary extruders The extrusion system is my property Location: D-26345 Bockhorn-Grabstede, Bahnhofstr 6, Germany

Year of construction: 2000, condition: refurbished (used), • Manufacturer: SICA • Type : C800 • Year : 2000 • 6 caterpillar • Up to 800mm • Motor power : 8,5kW • Great condition Csdpfx Aeix I I Iegkogp

Condition: good (used), Extrusion Line with Extruder & Co-Extruder. Sheet configuration B/A/B used for PP. Direct cooling unit (SMK) and SBI measuring unit newly installed in 2015. * Max. output: 1350 kg/h * Main screw output: 950 kg/h Cgodpsn Utt Hjfx Agkop * Main screw: 180mm / 33D * Co-extrusion output: 400kg/h * Co-extruder scew: 120mm / 33D * Die width: 650mm * Roll stack: 3 * Winding unit for Jumbo rolls up to 1500kg This Extrusion Line is already disassembled and secured for transport (Location: Waalwijk, Netherlands).

Condition: used, Year of construction: 1994, functionality: fully functional, machine/vehicle number: 8084/11/30, Saw for profile extrusion Cgodpfx Agoxghrxskjp

Year of construction: 2011, condition: like new (used), Extrusion machine for T-pieces used in the production of flue pipes made of stainless steel or other materials. Diameters supplied with the machine: 80 / 100 / 110 / 125 / 140 / 150 / 180 / 200 / 230 / 250 / 300. Machine in excellent working condition. Cjdpfx Agjw E Iv Dokegp

Year of construction: 2015, operating hours: 36,000 h, condition: good (used), functionality: fully functional, machine/vehicle number: 04638, Leistritz ZSE40HP-36D Year of manufacture: 2015 Power: 55 kW Speed: 600 rpm Includes die head with 6 holes Includes volumetric dosing unit from Brabender Previous application: MB ABS, PP & PE, up to 120 kg/h Cgjdpfx Agjx Sq I Neksp Operating hours: approx. 36,000 h For the condition and contents of the offer, please refer to the pictures and video. The system is currently located in England. The system is currently disassembled. The device/system offered here has been tested and is fully functional and ready for operation. The purchase price includes VAT. You will receive a proper invoice. For foreign customers, a net invoice can also be issued. A valid VAT ID number is required. Subject to prior sale. Please visit our website and check out our other offers as well. Stated company names and trademarks are the property of their respective owners and are used for identification and description purposes only. Deviations from technical data as well as errors in the description of the item may occur and are subject to change.

Condition: good (used), Year of construction: 1997, This Battenfeld cooling tank is in machine storage at Plastima Used Machinery. The vacuum tank is from 1994 and is in great condition. Cedpoxu E T Ajfx Agkjgp Brand: Battenfeld Extrusionstechnik GmbH Model: V125VA Year of construction: 1997 Tube outer diameter max: 125 mm Cooling length: 6000 mm

Year of construction: 2012, condition: used, functionality: fully functional, MACCHI CO-EXTRUSION BLOWN FILM LINE 3 LAYERS Complete line for the production of 3 layers blown film Materials that can be processed LLDPE, LDPE and HDPE Width max 2400 mm Nº3 Extruders with screw diameter 65mm / 80mm / 65mm Co-extrusion Die-head diameter 350 mm and 400 mm, with IBC Cedpsypkhcofx Agkegp Oscillating take off Double winder back-to-back with automatic roll change Reel diameter max. 800 mm Thickness control Kundig/K-Design Dosing units Piovan and Doteco Corona treater Martignoni Web guide Calibrating basket Tower Year 2012

Condition: used, - 3-layer blown film line on rotary platform Cgjdpexq Hcdofx Agkep - Product-specific modifications and adjustments are possible (subject to charge) - Spare screw, spare cylinder and various spare parts are additionally available for this line Freight terms: ex location Delivery time: by arrangement Payment terms: 100% in advance before machine takeover, strictly net

Year of construction: 2007, condition: good (used), Extruder "A" 135/33 L/D • Output max. LLDPE 950 kg/h Extruder "B" 60/28 L/D • Output max. VLDPE 200 kg/h Extruder "C" 60/28 L/D • Output max. LLDPE 200 kg/h Raw materials: LLDPE MFI 2 - 5 g/10min VLDPE MFI 2 - 5 g/10min Coex Structure 3 layer Film thickness range for stretch wrap film 11 - 45 μm Final film width 4 x 500 mm // 8 x 250 mm // 2 x 750mm + 1 x 500mm // 2 x 750 mm + 2 x 250mm • Flat die lip width 2.550 mm • Roller width 2.700 mm • Chill roll C1 Ø 1.000 mm • Chill roll C2 Ø 400 mm • Mechanical speed max. 600 m/min • Installed electrical power for one line approx. 1.022 kW • Utilisation factor approx. 40 - 50 % of total value • Necessary cooling capacity approx. 492 kW approx. 422.882 kcal/h • Compressed air consumption approx. 60 Nm³/h Cjdjqk T Diopfx Agkegp

Year of construction: 2026, condition: new, new PMH filament line extruder 30 mm - 28 l/d with noozle for 3D-filament with cooling tank with blow-up system for adhesive water with Laser control system (option) Csdpfxech Sfqs Agkegp with puller with filament accumulator (option) with winder and traverse guide MADE in GERMANY

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, clamping force: 800 kN, screw diameter: 40 mm, displacement volume: 201 cm³, injection weight: 183 g, Here, as a dealer for injection moulding machines, we are offering the following well-maintained used injection moulding machine for sale. Of course, we also purchase well-kept injection moulding machines manufactured from 2010 onwards. We have been wholesalers for injection moulding machines for over 25 years. Manufacturer: KraussMaffei Model: KM EX 80-380 (fully electric) Serial number: 61013142 Year of manufacture: 2009 Operating hours: 35,808 h Control system: MC 5 Fully functional Condition: very well maintained Machine comes from a single German owner xxxxx without robot / without temperature control unit xxxxx Extras: - Pneumatic shut-off nozzle - Pneumatic valve 1 at BWAP - Pneumatic control for hot runner/cold runner - Reject sorting chute - Nozzle protection door – ejector area safety door can be folded up - Euromap interface 18 on FWAP - Electric ejector plate in BWAP - Hydraulic auxiliary unit for hydraulic core pulls - Injection-compression moulding circuit - 2 x hydraulic core pull - 8-circuit water manifold - 8 heating zone controllers for hot runner - Extrusion injection circuit with position control - 3 x 230V sockets: 2 x CEE 16A / 1 x CEE 32A - Signal interface EUROMAP 67 for robot - Start-up circuit, QA package, cycle time analysis, cycle memory, event log - BluePOWER package - Graphic analysis package, trend chart - Interface for temperature control unit Main language: German Injection unit: Screw diameter: 40 mm Shot weight: 183 g/PS Injection pressure: 1,860 bar Shot volume: 201 cm³ Clamping unit: Clamping force: 80 tons / 800 kN Tie bar spacing: 420 x 420 mm Platen size: 655 x 670 mm Mould height: 250 mm Max. platen distance: 750 mm Ejector stroke / force: 150 mm / 125 kN Clamping unit fully electric Warranty: Guarantee valid up to first commissioning Loading/Shipping: Free loading onto buyer's truck or free delivery within Germany (shipping charges apply) Cgodpfx Ageyrd U Uokep Available from our warehouse in Hannover, Germany.

Condition: new, Year of construction: 2024, functionality: fully functional, COMPLETE PLASTIC GRANULATION LINES We offer technologically advanced complete plastic granulation lines designed to meet customer needs. Koltex PRS is a Polish manufacturer of high quality machinery and equipment for the various stages of waste recycling: PP,PE,LDPE,LLDPE,PS,ABS,HDPE. We provide comprehensive solutions and support for machine configuration. The innovative technologies of our recycling systems guarantee the highest degree of user-friendliness and equipment efficiency. We offer all the machines needed to configure a complete plastic recycling line. The XR 8 granulation line is the latest model from Koltex Plastic Recycling Systems in the field of LDPE film processing. In addition to the well-known technological solutions used in standard extruders, a number of changes have been made to achieve high production rates while improving the quality of the regranulate achieved. The new system is characterized by low energy consumption and significantly simplified operation thanks to the new SMART software. Numerous modifications have reduced the machine footprint by 30% compared to the previous model, but also increased productivity by 45% while reducing energy requirements by around 15%. An intelligent temperature control system for the plastic in the Agglomerator and an automatic material dosing system ensure process stability. Thanks to the automation of the process, operator involvement has been reduced to a minimum. Our offer also includes: Cjdpfouqmavox Agkegp Complete systems for plastics recycling Mills Plastification systems, vibrating screens, centrifuges Screen changers Peripheral equipment Washing lines (DWFS®) Dynamic washing machines Drying separators Granulation and extrusion lines Service and spare parts You can find out more about our range of products in this area at our website

Condition: good (used), Year of construction: 1997, functionality: fully functional, saw blade diameter: 500 mm, For Sale – Elumatec SA 142/25 Aluminum Saw (1997) Machine: Elumatec SA 142/25 Type: Automatic aluminum cutting saw (suitable for aluminum and light-metal profiles) Year: 1997 🔧 Technical Specifications Saw blade diameter: 500 mm Blade rotation speed: 2800 rpm Feed length per cycle: 5–600 mm Cutting angle: 90°, with possible bevel/mitre capability depending on machine configuration Power supply: 230/400 V, 3-phase, 50 Hz Air supply required: 7 bar Suitable materials: Aluminum profiles, thin-wall light-metal profiles, window/door profiles and general industrial aluminum cutting ✅ Features & Benefits Reliable industrial saw designed for high-volume aluminum profile cutting Strong and stable construction with a 500 mm blade for fast, clean cuts Step-feed system (5–600 mm) enables efficient serial production and flexible cutting lengths Ideal for window & door manufacturers, metal workshops, façade builders, and any company working with aluminum extrusions Simple, durable design – easy to maintain, spare parts widely available 📌 Notes Requires 3-phase electrical connection and compressed air (7 bar) Angle-cutting functionality should be verified depending on the machine’s configuration Machine condition and accessories can be confirmed upon inspection. Chip vacuum is included in this sale! Csdpfxoxz R Ixo Agkogp Please verify the accuracy of the machine specifications with the seller.

Condition: excellent (used), Year of construction: 2004, T-Die Serial No.: L 1081-041391 // Calender Serial No.: F 1201-041392 Haul-Off Serial No.: F 1201-041392-T Max. winder speed: 50 m/min Type: Film system 1080 mm usable width Equipment / Additional information: Max. gross output PP up to 1000kg/h with film width up to 1200mm A special feature is the winding system, which can cut narrow films (150 mm - 100 mm) or for example 8 x 175 mm or even 2 x 700 mm one nozzle lip with a max. film thickness of 2mm up to 1000kg/h. Total power consumption: 211 kW/h Main engine power: 250 kW Min. 068 mm film thickness in PS / min. 0.75 mm in PP Maximum calender speed: Max. 50 m/min. mechanically possible Consists of: -Dosing system 5-chamber Maguire Cgedpfxow Tbr Hj Agksp -Extruder (160 mm screw) Amut EA 160 // Age: 2003 -Screen changer (for cleaning in food production) -Melt pump -Slot die (1 insert) 120 cm -Lip with max. film thickness up to 2mm up to 1000kg/h -Calender 140 cm -Thickness gauge SBI TMD-EC/140.20.200.R -Post-cooling rollers (4 pcs.) -Winder (Film jam during roll jam) -Cutting machine & film tensioner -Film winders (3 pcs.) -Mill MAZZA CBS 25 40 2T18 // Age 2003 Fully existing infrastructure; control cabinets, pumps, etc.

Condition: excellent (used), Professional granulator from the German brand Dreher – model S 26/26 GFS-SPEZIAL. This unit is designed for shredding plastics from injection molding or extrusion processes. Robust construction, proven VEM 7.5 kW motor, three-phase 400 V power supply. The machine features a large feed hopper, convenient service access, and an electrical control cabinet with emergency stop button. The installed low-speed three-phase motor ensures high shredding power with stable operation. Cedpfx Agovyumyskogp • Motor power: 7.5 kW • Power supply: 400 V 50 Hz • Speed: 1500 rpm • Throughput suitable for medium and large injection moulding machines • German manufacturing quality • Sturdy frame and knife assembly Very good condition, mechanically inspected, ready for operation.

Condition: excellent (used), Year of construction: 2015, operating hours: 3,590 h, functionality: fully functional, Equipment: documentation/manual, Corrugator-Shuttle system , ITIB MACHINERY INTERNATIONAL s.r.l. for producing Double wall corrugate pipe, HDPE and PP , with outside corrugated and inside smooth layer Description of the equipment • Model: Corrugator F700 - shuttle system Molds: 7 dimension of mold blocks . Each dimension include 9 pairs of molds. Cgjdpsv E Nwdofx Agkep Die head: 7 die heads - Each dimension has its own die head Cooling mandrels : 7 pcs - Each dimension has one cooling mandrel for SN 8

Condition: excellent (used), functionality: fully functional, pressing force: 1,000 t, stroke length: 170 mm, The press is designed for carrying out various cold pressing operations that require high specific pressures with short strokes: embossing, sizing, finishing, die forging and the like. In addition it can be used for carrying out cold extrusion of steel parts. Press is in good condition. Manufactured by Barnaul Capacity, ton 1000 Strokes per minute 32 Table size, mm 800 x 800 Cgjdpfoynkr Sox Agkjp Slider stroke, mm 170 Max distance between table and slider, mm 470 Bolster plate thickness, mm 140 Lower knockout: -Stroke, mm 11; -force, ton 320 Upper knockout: -Stroke, mm 10; -force, ton 10 Motor capacity, kW 40 Press dimensions, mm 3060 x 1730 x 3830 Press weight, kg 26000

Year of construction: 2007, condition: ready for operation (used), Other machine manufactured in 2007. This Barberan PUR-33-L is a continuous wrapping line designed for applying PVC foil, CPL, paper, and veneer on various materials using hot-melt technology. It features a robust one-piece electro-welded steel frame, motorized rubber-coated feed wheels, and a slot die extrusion system for precise glue application. If you are looking to get high-quality wrapping capabilities, consider the Barberan PUR-33-L machine we have for sale. Contact us for further details. • Base Frame: One-piece electro-welded steel frame with high structural rigidity. It is designed to absorb vibrations and maintain pressure roller alignment. • Transport System: Motorized rubber-coated feed wheels with speed controlled via inverter, ensuring precise synchronization between glue application and profile feed. • Pressing / Calendering Zone: Universal supports and multiple pressure rollers with various shapes and hardness levels, suitable for complex profile geometries. • System Type: Slot die extrusion system with adjustable lips. Csdjym U Dispfx Agksgp • Working Width: 330 mm. • Glue Application Accuracy: Constant gram-per-square-meter distribution, independent from line speed. Closed system reduces oxidation, prevents premature PUR crosslinking, and minimizes material waste. • Adjustment: Micrometric lip adjustment for precise control of glue film thickness. • Type: 20 kg PUR drum melter with heated platen, where only the top layer is melted to preserve the chemical integrity of the remaining adhesive. • Sealing System: Airtight design with dedicated seals to prevent air/moisture ingress. • Pump: Integrated gear pump providing constant, pulsation-free adhesive flow to application head. • Function: Maintains adhesive working temperature between approximately 120–150 °C during transfer from melter to slot die head. • Length: 4.5 meters. • Technical Features: Internal core made of PTFE (Teflon), high pressure, and PUR-resistant. It includes a uniform electric heating element to prevent cold spots, high-efficiency thermal insulation, an integrated thermocouple, and temperature control via machine PLC.

Condition: new, Year of construction: 2026, operating hours: 1 h, functionality: fully functional, total length: 3,400 mm, total width: 600 mm, total height: 1,400 mm, warranty duration: 18 months, overall weight: 500 kg, input voltage: 400 V, power: 3 kW (4.08 HP), compressed air connection: 8 bar, air pressure: 7 bar, Equipment: documentation/manual, Made in Ukraine, CЄ. 18 month full warranty. SAS200 – Automatic Casing-Free Forming & Cutting System for Meat, Fish, and Pet-Food Snacks This professional system is designed for the industrial production of high-margin, casing-free snacks such as mini salami, meat sticks, jerky strips, fish snacks, and pet treats. The SAS200 can be connected to any standard rotary vacuum filler — including Handtmann, REX, Vemag, or our own gear-driven vacuum filler. Main Features: • Output capacity: up to 200 kg/h • Forming nozzles: cylindrical (Ø8–20 mm) and flat (25×5 mm to 200×5 mm) • CE certified, industrial-grade • Stainless steel, hygienic design • Pneumatic guillotine with automatic water cleaning • Integrated decompressor for uniform extrusion • Operator control via 10.1” TFT touchscreen (Delta) • Incl set drying trolleys 30 rows with 60 trays 900 x 500mm (60 trays, 30 rows) Compatibility: ✅ Works with most rotary fillers (Handtmann, REX, Vemag) ✅ Also available with our own gear-driven vacuum filler (200 L) Live demo available in: • 🇬🇧 Ashford, United Kingdom – Windsor Food Machinery • 🇵🇱 Kraków, Poland – REGIS Showroom Cgodep S Nv Iepfx Agksp