Used Extrusion for sale (333)

Year of construction: 1996, condition: ready for operation (used), Output: 140-180kg/h, screw diameter: 50-103mm, screw length: 1300mm, max. screw rotational speed: 43/min, connected load: 25kW, operational hours counter: 62,590h, including dosing unit with hopper, vacuum pump, cylinder cooling aggregate and screw temperature control. Njdpfx Aohz Dyashnjlf

Condition: new, Year of construction: 2024, functionality: fully functional, The SR 8 screw compactor from Koltex is an advanced solution designed for drying film flakes and preparing them for the extrusion process. This innovative machine effectively reduces the moisture content of the material to around 5%, significantly impacting the quality of the final recycled product. Modular construction The machine can be customized to meet the individual needs and requirements of the customer, allowing it to be used to its optimum potential in a wide variety of applications. Reliability The use of renowned drive components with a high degree of efficiency reduces operating costs while extending service intervals. Nlodpfxjuqwzwo Ahnof Intelligent machine operation Touch panel with intuitive interface for easy control and monitoring of the working process. Space-saving The press is designed to be compact, saving valuable space in the workplace. Capacity (LDPE film): 1500 KG/H Auger diameter: 500 mm Engine power: 45 kW Scraping power: 7.5 kW Feed size: 760x650 Overall dimensions: 6097x1833x2729 Weight: 6800 kg

Condition: new, Year of construction: 2025, functionality: fully functional, Drying Centrifuge Model ERFOR® CR8 Component device for recycling washing lines ♻️ ♻️ ♻️ The machine is designed for drying plastics—both soft and hard—including: films such as LLDPE, LDPE, HDPE, PP, PVC, PS, PA, post-agricultural films, agro-fibre, shredded big bags, PP sacks, fishing nets, peat packaging, and many more. Nodpfx Ahsuql Rtenelf Drying centrifuges Model - CR8 55/75 Motor power [kW] - 55/75 kW Film drying capacity [kg/h] - 1500/2000 Dimensions (L*W*H) (mm): 1970*2800*2060 / 2100*3150*1900 Ground material drying capacity [kg/h] - 5000 Our offer also includes: Complete plastic recycling systems DWFS® washing lines Granulation and extrusion lines For more information, please visit our website.

Condition: new, Year of construction: 2026, operating hours: 1 h, functionality: fully functional, total length: 3,400 mm, total width: 600 mm, total height: 1,400 mm, warranty duration: 18 months, overall weight: 500 kg, input voltage: 400 V, power: 3 kW (4.08 HP), compressed air connection: 8 bar, air pressure: 7 bar, Equipment: documentation/manual, Made in Ukraine, CЄ, new. 18 month full warranty. SAS200 – Automatic Casing-Free Forming & Cutting Module for meat, fish, and Pet-Food Snacks easy connects to your vacuum filler This professional system is designed for the industrial production of high-margin, casing-free snacks such as mini salami, meat sticks, jerky strips, fish snacks, and pet treats. The SAS200 can be connected to any standard rotary vacuum filler — including Handtmann, REX, Vemag, or our own gear-driven vacuum filler. Main Features: • Output capacity: up to 500 kg/h • Forming nozzles: cylindrical (Ø8–20 mm) and flat (25×5 mm to 200×5 mm) with auto cutting by length before drying • CE certified, industrial-grade • Stainless steel, hygienic design • Pneumatic guillotine with automatic water cleaning • Integrated decompressor for uniform extrusion • Operator control via 10.1” TFT touchscreen (Delta) • Incl set drying trolleys 30 rows with 60 trays 900 x 500mm (60 trays, 30 rows) Compatibility: Nlsdpsp S Nv Isfx Ahnef ✅ Works with most rotary fillers (Handtmann, REX, Vemag) ✅ Also available with our own gear-driven vacuum filler (200 L) Live demo available in: • 🇬🇧 Ashford, United Kingdom – Windsor Food Machinery • 🇵🇱 Kraków, Poland – REGIS Showroom

Condition: like new (used), Year of construction: 2013, BLOW EXTRUDER HDPE Model EuroTruder 75 Made by Euro-Stel, Belgium Njdpfx Ahowivdksnjlf YOM 2013 extruder: diameter 75x28 D - with neck sweder and granulate hopper mold is not included EXCELLENT CONDITION

Year of construction: 1988, condition: ready for operation (used), A regeneration plant Erema is available. Components: conveyor belt, extrusion unit, screen changer, strand pelletizer, control unit, and intermediate conveying system. An on-site inspection is possible. Nedpfx Ahjw Dfgwenjlf

Year of construction: 2016, condition: ready for operation (used), A high-temperature water temperature control unit for injection molding tools, extrusion systems, die-casting tools and industrial temperature control processes up to 200°C is offered. Temperature range: 0°C to 200°C, circulating medium: water, heating capacity: 45kW, cooling capacity: 120kW, filling volume main unit: 32l, filling volume valve unit: 2l, weight: approx. 300kg, dimensions X/Y/Z: approx. 700mm/900mm/1900mm, weight of the valve unit: 37kg. Equipped with control via touch-screen visualization, separate control cabinet and external valve unit for high-temperature applications. Documentation available. Inspection possible by appointment. Nledpfx Ahozfp Hujnef

Year of construction: 1998, condition: ready for operation (used), A complete PS foam extrusion line (capacity: 350kg-400kg/h) is available. 1) 7x dosing units K-Tron Switzerland and Coperion, main components: 3, side components: 4, capacity: 350kg-400kg/h. 2) Primary extruder Battenfeld, year of manufacture: 1998, screw diameter: 120mm, screen changer: Gneuss, double piston pump: LEWA. Including gas injection. 3) Secondary extruder, screw diameter: 150mm/33D. Including unused old die and a coextruder Kühne with 50mm screw diameter. 4) Oil-heated Sunwell round die. 5) Calibration unit Dorn, knives: 2, films: 2, film width: 1080mm. 6) Take-off unit Gloenco Double S Haul-Off. 7) PS film winder, positions: 4, simultaneously operated positions: 2, winding speed range: 10m-30m/min, roll weight range: 150kg-300kg, roll length range: 500mm-800mm. Including discharge with ionization. Documentation available. An on-site inspection is possible. This line is sold ONLY to customers outside Europe. Nledpfx Ahsxq Exqensf

Year of construction: 2016, condition: ready for operation (used), Control panel: Siemens SIMATIC HMI, connected load: 80kW, weight: 1.85t, operating hours: approx. 4500h, with Kreyenborg feed hopper, year of manufacture: 2017, and Trendelkamp screen changer. Documentation is complete, on-site inspection is possible. Njdpfx Ahov Uz Awenelf

Year of construction: 1990, condition: ready for operation (used), A total of three extruders including throughput measurements (scales), as-new barrels (2018) and overhauled screws are available. Total extrusion capacity: approx. 100kg/h. 1) DC smoothbore extruder, output: 17kW, machine dimensions X/Y/Z: approx. 2300mm/600mm/1100mm. 2) DC smooth tube extruder, power: 32kW, machine dimensions X/Y/Z: approx. 3000mm/700mm/1200mm. 3) DC grooved barrel extruder, output: 49kW, machine dimensions X/Y/Z: approx. 3000mm/700mm/1200mm. On-site inspection is possible. Nledpfovw Aqhox Ahnof

Year of construction: 2006, condition: ready for operation (used), A complete Battenfeld compact extrusion line for the production of PVC profiles is available. 1) Twin-screw extruder Battenfeld MBEX 2-50-16 V, year of manufacture: 2006, output capacity: 15kg-60kg/h, screw diameter: 52mm, screw length: 16×D, barrel zones: 4, barrel cooling zones: 3, adapter zones: 1, die heating zones: 9, control system: BMCtouch. Including dry vacuum pump, pressure measuring points, clamping flange, water-air separator, blow-off device, mounting elements and hopper cover. 2) Calibration table Battenfeld KP 125 V 2/4m, mounting frame length: 4100mm, mounting rail width: 320mm, longitudinal adjustment: 500mm, transverse adjustment: +/-15mm. 3) Speck vacuum system, pumps: 2, motor power: 2×4kW, operating pressure: 200mbar, max. air capacity: 2×140m³/h. 4) Battenfeld RP 125 SE caterpillar haul-off, passage height: 100mm, contact length: 1100mm, pad width: 160mm, haul-off speed: 15m/min, max. haul-off force: 7kN. 5) Battenfeld SP 63 E underfloor saw, max. cross-section capacity X/Y: 200mm/300mm, sawing accuracy: +/-0.5mm. Overall line dimensions X/Y/Z: approx. 12000mm/1200mm/2000mm, weight: approx. 4500kg, operating hours: approx. 319h. Including chip extraction. The line touchscreen is defective (nothing is visible), however, the line can be operated using an external monitor, mouse and keyboard. Documentation available. An on-site inspection is possible. Nljdpfx Ahjzg Iqhjnjf

Condition: ready for operation (used), Year of construction: 2018, The UniTower is suitable to store bars or extrusions as well as sheet metal, plates, Euro pallets or boxes. Pallets: Dimensions X/Y/Z: 3000mm/1500mm/90mm, payload per pallet: 1500kg, number of storage spaces: 86 pieces. Payload: 15kN, occupancy rate: 90%. Total dimensions without stations X/Y/Z: approx. 9000mm/6000mm/5800mm. On-site inspection is possible. Nlodoxv Au Tjpfx Ahnef

Year of construction: 1982, condition: ready for operation (used), A twin screw extruder is offered. Drive: ASEA electric motor type ACA 200-6L, 50.5kW, 1460rpm. Inspection possible by prior arrangement. Nljdjx Hifvspfx Ahnsf

Year of construction: 2005, condition: ready for operation (used), Three cable processing machines from a complete extrusion line are available. 1) Spindle pay-off Ka-Be-Ma AS400, spool flange diameter range: 140mm-400mm, min. core diameter: 90mm, max. spool width: 300mm, max. spool weight: 50kg, conductor diameter range: 0.1mm-1mm, max. pay-off speed: 600m/min, tensile force: 0.5N-20N, machine dimensions X/Y/Z: approx. 1200mm/1550mm/1450mm, weight: approx. 1000kg. 2) Cooling section Ka-Be-Ma T-KW-UKW-A-1,5, Zone 1: Process: immersion cooling, temperature range: 70°C-80°C, length: 2000mm. Zone 2: Process: spray cooling/deflection section, temperature: approx. 25°C. 3) Dual take-up Ka-Be-Ma DWST400-1, spool flange diameter range: 305mm-400mm, min. core diameter: 156mm, max. spool width: 282mm, conductor diameter range: 0.1mm-1mm, speed: 600m/min, tensile force range: 0.5N-1.5N, max. spool weight: 80kg, machine dimensions X/Y/Z: approx. 1200mm/1550mm/1450mm, weight: approx. 2200kg. Documentation available. An on-site inspection is possible. Nlsdpeyxq Upsfx Ahnjf

Year of construction: 2023, operating hours: 100 h, condition: good (used), functionality: fully functional, Water treatment system for compounding and extrusion plants For sale is a complete industrial water treatment system for supplying a compounding or extrusion plant with softened and fully demineralized process water. The system consists of pre-filtration, a dual softening unit, a reverse osmosis unit, a 3,000-liter permeate tank, and a frequency-controlled dual booster pump unit. The system is particularly suitable for closed-loop cooling water circuits and for applications where a consistently high water quality and a reliable supply to the production plant are required. System configuration Pre-filtration and protection Backwash filter for mechanical impurities Flow rate: 7.5 m³/h at a pressure drop of 0.5 bar Automatic, time-controlled backwash System separator with a KVS value of 12 m³/h Connection size: R 1" Pressure regulator with a DIN flow rate of 5.3 m³/h Safety module Connection block with integrated bypass and sampling valve Flexible pressure hoses, length 1,000 mm, Rp 1", up to 10 bar Dual softening unit Dual softening unit for continuous operation Nominal flow rate: 2.9 m³/h Capacity: 200 m³ × °dH each Resin disinfection system Salt deficiency switch with potential-free alarm or low-level signal Sampling group with pressure gauge and sampling valve Hardness control unit for wall mounting Installation fitting for 1" pipe Due to the dual design, one softening column can be regenerated while the second column continues to supply softened water. Reverse osmosis unit Reverse osmosis unit with vertically arranged high-performance modules, permeate recirculation, and automatic concentrate flushing. Technical data: Permeate flow rate at 15 °C: approx. 450 l/h Recovery rate: approx. 75 % Salt rejection rate: approx. 98.5 % Required inlet pressure: 2–6 bar Feed water connection: DN 25 Permeate connection: DN 20 Concentrate connection: DN 15 Supply voltage: 3 × 400 V / 50 Hz Dimensions: approx. 1,800 × 610 × 810 mm (H × W × D) Permeate tank Black PE storage tank Capacity: 3,000 liters With level control and various connections Dimensions: approx. 1,750 × 995 × 2,450 mm (H × W × D) Dual booster pump unit Pre-assembled and electrically wired booster pump unit on a stainless steel frame, ready for connection. Equipped with two pumps and integrated frequency converters for constant and demand-based pressure supply. Technical data: Nsdezt Sb Djpfx Ahnolf Nominal flow rate per pump: 2.0 m³/h Nominal head: 43.6 m Flow rate with one pump: approx. 0.6–3.0 m³/h Flow rate with two pumps: approx. 1.2–6.0 m³/h Delivery pressure at maximum flow rate: approx. 2.5 bar Zero flow head: approx. 6.7 bar Factory-set constant pressure: 4.0 bar Pre-pressure of the diaphragm expansion tank: 3.5 bar Measuring range of the pressure sensors: 0–10 bar Diaphragm expansion tank: 8 liters Permissible water temperature: 1–30 °C Permissible ambient temperature: 1–40 °C Suction connection: DN 65 / PN 10, loose flange Pressure connection: 50-mm socket Supply voltage: 3 × 380–500 V Motor power: 2 × 1.1 kW Nominal current per pump: 2.2–1.9 A Dimensions: approx. 950 × 700 × 858 mm Dry weight: approx. 55 kg Technical specifications based on available documentation. Subject to prior sale and errors. An inspection of the system is possible by prior arrangement.

Year of construction: 1998, operating hours: 64,082 h, condition: good (used), This Cincinnati extruder is currently in storage at Plastima Used Machinery. The machine was manufactured in 1998. Nljdpezu Nnqsfx Ahnjf – Brand: Cincinnati – Model: Titan 45R-APC – Year of manufacture: 1998 – Conical twin-screw extruder – Screw diameter: 45 mm – Operating hours: 64,082

Condition: good (used), Year of construction: 1991, Brand: Hans Weber GmbH Model: DS 120 Year of manufacture: 1991 Screw diameter: 120 mm • One pair of original WEBER screws (in excellent condition, including measurement report) • One pair of non-original screws Nlsdpfx Aozu Nl Ashnef • Gearbox inspected and partially overhauled by WEBER • Control system upgraded to WPS control • Output on PVC approximately 700 kg/hour

Year of construction: 1993, operating hours: 2,466 h, condition: used, Brand: Leistritz AG Model: Micro 27/40 D Screw type: Twin screw Year of manufacture: 1993 Screw diameter: 27 mm L/D ratio: 40 Nlodpszu Nk Sjfx Ahnjf Operating hours: 2,466

Condition: excellent (used), LAUDA LTH 303 Temperature Control Unit / Heating Unit for Tool Temperature Control We have 3 LAUDA LTH 303 temperature control units for sale, all in very good condition. These units are ideally suited for temperature control of extrusion tools, nozzles, calibration dies, injection molds, and a wide range of industrial applications. All units are fully functional, immediately available, and can be inspected at our facility in Wuppertal at any time. Technical Data * Manufacturer: LAUDA * Model: LTH 303 * Year of Manufacture: 1990 * Heat Transfer Medium: Oil * Max. Supply Temperature: up to 350 °C * Connection Voltage: 220 V * Heating Power: 3.2 kW * Frequency: 50 Hz Nodpfxjzpxcys Ahnslf Features * Digital temperature display * Integrated circulation pump * Compact, robust industrial design * User-friendly control * Ready for immediate use

Condition: excellent (used), functionality: fully functional, MAAG EXTREX 56 melt pump station with Kreyenborg K-SWE 101 screen changer Complete melt pump station consisting of a MAAG EXTREX 56 melt pump and a Kreyenborg K-SWE 101 twin-piston screen changer. The system has already been mechanically adapted, mounted on a common base frame, and is ready for immediate use. Nodpfx Ahezpw Sasnolf Scope of delivery: * MAAG EXTREX 56 melt pump * Drive unit including gearbox, cardan shaft, and motor * Complete heating system for the melt pump * Kreyenborg K-SWE 101 twin-piston screen changer * Hydraulic unit * Manual switching via hand valve * Heating system for the screen changer * Completely mounted on a base frame * Connection box The system can be inspected and tested at our facility in Wuppertal at any time. On request, demonstrations or video calls are also possible. In addition, we have other melt pumps, screen changers, and various peripheral devices for extrusion systems in stock. We will gladly put together a suitable solution for you, tailored to your application.

Condition: used, functionality: fully functional, type of input current: three-phase, type of cooling: air, overall weight: 3,800 kg, TECHNICAL SPECIFICATIONS Brand: Climaveneta Model: TP/SRAT/HL 1302 Unit Type: Air-Cooled Chiller Cooling Capacity: 359 kW Cooling Capacity: 308,740 Kcal/h Evaporator: Plate Heat Exchanger Condenser: Aluminum Fin Copper Tube Air-Cooled Condenser Fan Type: Axial Fan Number of Fans: 8 Compressor Brand: Bitzer Compressor Model: CSH7561-80Y-40P Number of Compressors: 2 Screw Compressors Control System: Climaveneta CVM20 Refrigerant: R407C Refrigerant Charge: 124 kg Oil Quantity: 28 kg Water Flow Rate: 62 m³/h Sound Pressure Level: 73 dB(A) Supply Voltage: 400V / 3Ph / 50Hz Dimensions (L x W x H): 6800 x 2320 x 2300 mm Weight: 3,515 kg Description The Climaveneta TP/SRAT/HL 1302 air-cooled chiller is a high-efficiency cooling system designed for industrial process cooling applications. The unit has a cooling capacity of 359 kW and operates with 2 Bitzer CSH7561-80Y-40P screw compressors. The system, which uses R407C refrigerant, is suitable for use in production facilities, plastic injection, extrusion, food production, cold storage, HVAC applications, and freeze-drying processes. Key Features 359 kW cooling capacity 2 Bitzer screw compressors Nedpfxszfy Sns Ahnolf 8 axial fans Climaveneta CVM20 control system R407C refrigerant Low noise level Robust construction suitable for industrial use Available for immediate delivery Application Areas Industrial process cooling Plastic injection Extrusion lines Food production facilities Cold storage facilities Freeze-dry systems HVAC and central air conditioning

Condition: excellent (used), functionality: fully functional, Year of construction: 2019, operating hours: 467 h, total length: 840 mm, total height: 1,020 mm, total width: 750 mm, overall weight: 500 kg, input voltage: 400 V, input frequency: 50 Hz, feed length X-axis: 500 mm, feed length Y-axis: 400 mm, feed length Z-axis: 510 mm, space requirement length: 840 mm, space requirement height: 1,020 mm, space requirement width: 750 mm, 3D printer Evotech EL 102 – professional-grade machine with a large build volume. Original price: €60,000. Inspection possible in Upper Bavaria. Only 467 operating hours! Nledpfxeztn Dze Ahnof For sale: an Evotech EL 102, a professional FDM/FFF 3D printer manufactured in Austria. This machine is ideal for prototyping, small-batch production, and the manufacturing of functional components with the highest quality requirements. Price negotiable. Technical specifications: - Model: Evotech EL 102 - Printing process: FDM/FFF (Fused Filament Fabrication) - Build volume: approx. 500 × 400 × 510 mm - Extruder: 2 independent extruders (dual extrusion) - Nozzles: 0.4 mm standard (replaceable, other sizes optional) - Layer thickness: 0.05 – 0.6 mm - Print bed: heated, PEEK or metal print plate - The print bed is equipped for mounting print plates with a vacuum system. - Automatic print bed calibration before program start. - Materials: ABS, PLA, PETG, PA, PEEK…, technical filaments with CF+GF and support material. - Two independent filament drying chambers for a better and cleaner process. - Print head and drive servos are cooled. - Temperatures: Extruder up to 410 °C, heated bed up to 120 °C, build chamber heating up to 100°C - Software: compatible with Simplify3D, Cura, Slic3r - File formats: STL, OBJ, G-Code - Power supply: 400 V, 50/60 Hz - Dimensions: approx. 840 × 750 × 1020 mm - Weight: approx. 500 kg Features & Advantages: - Stable all-metal construction for precise continuous operation. - Large, enclosed build volume for demanding materials. - Dual extruder for multi-material and support structures. - Industrial-grade mechanics & control. - Smooth operation, low vibration. - Optimal for research & development, prototyping and small series production. - The first update package was installed during a service. Condition: - Used, very well maintained. - Fully functional and ready for immediate use. Spare parts + consumables as well as various filament types are included. See pictures. Service: - Loading with a forklift possible. - Transport via freight forwarder. - Offered price is net. - Invoice with VAT possible. We are selling because the machine no longer fits into our service portfolio.

Condition: like new (used), Year of construction: 2020, functionality: fully functional, Industrial spinning extruder from an Oerlikon Barmag production installation, suitable for polymer processing and nonwoven applications. 2 extruders are available for sale at the moment. The machine was manufactured in 2020 and has seen very little use. Machine details: Manufacturer: Oerlikon Barmag / BBE Engineering Type: 9E10/30D-HT Project: P13000 Year of manufacture: 2020 Application: spinning / polymer extrusion / nonwoven production Polymer configuration: PP Single-screw extruder Industrial heavy-duty design The original Barmag documentation identifies the unit as a “Spinning Extruder” and covers its operation as part of the complete production plant. The equipment includes the extruder with drive system, feeding/dosing equipment, electrical/control equipment and associated components as shown in the photographs. Components from well-known industrial manufacturers including Siemens, Flender, Nordson and Oerlikon Barmag are installed. The machine is currently still installed, which allows the buyer to inspect the equipment in its existing installation. Condition: Used, very low operating use Year: 2020 Availability: Immediately / by arrangement Location: Germany Extensive original technical documentation is available for the machine, including operating and maintenance documentation, drawings and information concerning the drive, gearbox, heating, cooling and electrical systems. The documentation also includes drawings and technical information concerning the extruder and its associated equipment. Nedpfx Ahozulh Tjnjlf The complete PDF documentation with detailed technical specifications can be provided to interested buyers upon request. Additional photographs and information are available upon request. Worldwide inquiries are welcome.

Condition: used, EOS Transitube DCL 800/30 PM Powder Conveying System / Dosing System for 2 Components Description For sale is a used EOS Transitube DCL 800/30 PM powder conveying system from tim plast Anlagenbau GmbH. Nedpszn H D Njfx Ahnjlf The system was developed for the continuous dosing, conveying, and homogenization of two material components. It is suitable for processing powders, granules, and ground materials in the plastics industry. The materials are dosed precisely, mixed via the Transitube conveying system, and continuously fed to the production machine. According to the manufacturer, the DCL series is designed for the continuous dosing and mixing of two components. Due to its robust industrial design and extensive scope of supply, the system is ideally suited for use with extrusion and injection molding machines. Technical Data Manufacturer: transitube / tim plast Anlagenbau GmbH Model: DCL 800/30 PM Designation: EOS Powder Conveying System Material hoppers: 2 × approx. 400 liters Conveying capacity: approx. 50–2,000 kg/h (material dependent) Dosing accuracy: ±0.5 to ±2 % Dosing range: 5–50 % Additive dosing: 0.2–10 % Mains connection: 3/N/PE 400 V AC Frequency: 50/60 Hz Connected power: 2.0 kW Dimensions (approx.): Width: 1,850 mm Depth: 900 mm Height: 1,320 mm Weight: approx. 180 kg Equipment 2 dosing hoppers with hinged lids Transitube screw dosing system Automatic control cabinet with touch panel Electrical control Conveying and mixing system Pneumatic components Flowserve Automax actuators Conveying motor with gearbox Extensive hose and pipe package Accessories as shown in the pictures Application areas Plastics processing Extrusion Injection molding technology Powder conveying Granule conveying Ground material dosing Material mixing Production automation Condition Used. The system is in good condition with normal signs of wear and tear consistent with its age. The scope of supply corresponds to the photos shown. Scope of supply EOS Transitube DCL 800/30 PM powder conveying system Control cabinet Conveying units Motors Pneumatic components Piping Conveying hoses Extensive accessories as shown in the pictures Shipping Inspection possible by appointment at any time. Loading onto a truck can be arranged. Europe-wide shipping by freight forwarder possible for an extra charge. Subject to prior sale and errors.

Condition: new, Year of construction: 2026, functionality: fully functional, power: 22 kW (29.91 HP), input voltage: 400 V, input current: 30 A, input frequency: 50 Hz, type of input current: three-phase, pressing force: 315 t, stroke length: 800 mm, operating speed: 120 mm/s, reverse speed: 100 mm/s, table width: 1,160 mm, table length: 1,260 mm, table height: 600 mm, ram plate width: 1,160 mm, ram plate length: 1,260 mm, distance table to ram: 1,250 mm, clearance between the columns: 1,160 mm, retraction force: 30 t, oil tank capacity: 510 l, total length: 2,000 mm, total width: 1,250 mm, total height: 3,500 mm, overall weight: 13,000 kg, Equipment: CE marking, documentation/manual, safety light barrier, YQ32-315T Hydraulic Press This series of presses are general-purpose hydraulic presses, widely used in machinery manufacturing, automotive, motor, electrical appliance, light industry and other industries. They are suitable for metal processing procedures including drawing, bending, flanging, cold extrusion and blanking. The machines also perform straightening, press fitting, as well as compression molding of powder products, abrasive products, plastic products and insulating materials. Nodpfx Ahjy Uiyvjnslf The working pressure, pressing speed and stroke can all be adjusted within the specified parameter range according to process requirements. Equipped with an independent power unit and electrical control system, the press adopts centralized push-button control and supports three operation modes: manual, semi-automatic and automatic. It is available with two pressing modes: pressure setting and stroke setting. Operation Sequence: Motor start → Main cylinder piston rapid no-load downstroke → Low-speed pressurization → Pressure holding (holding time adjustable) → Pressure relief → Slide return stroke → Work stop → Total stop Mainframe The mainframe adopts a vertical three-beam four-column structure, consisting of an upper beam, a slide, and a lower beam connected by four columns, which are fastened with nuts to form a closed rigid frame. All major structural components of the mainframe are fabricated from welded steel plates using CO₂ gas shielded welding. After welding, the entire frame undergoes vibration stress relief to eliminate internal residual stresses. Key components are machined on advanced equipment such as gantry milling machines, large floor-type boring and milling machines, and large precision lathes, ensuring high overall accuracy of the machine. The mainframe is pre-tensioned using hydraulic nuts. The slide is connected to the piston rod of the main cylinder and moves up and down guided by the columns. T-slots are provided on the lower surface of the slide and the upper surface of the movable worktable for die mounting. The columns are made of high-quality 45 carbon steel with hard chrome plating on the surface; the column guide sleeves are made of composite material, offering excellent wear resistance and self-lubricating properties.