Used Feeding Trolley for sale (13,376)

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, total length: 43,000 mm, total height: 3,800 mm, total width: 20,000 mm, type of input current: three-phase, workpiece weight (max.): 200 kg, compressed air connection: 9 bar, workpiece height (max.): 2,400 mm, workpiece length (max.): 7,200 mm, We are offering this BEWAP MACRO 6 POWDER COATING MACHINE – Complete Powder Coating Line 7.2 m, year of manufacture 2015, in very good condition. Complete setup for surface treatment, including 2 powder coating booths and 2 curing ovens for powder coating applications. Machine in perfect working order. Year 2015. Surface Treatment Booth (made of 316 L stainless steel, membrane spray pumps, dosing pumps, stainless steel pickling tanks with immersion heaters, rinse tanks, effluent tank, dosing pumps, reverse osmosis unit, water softener) Drying oven (gas burner, control cabinet) 2 manual powder coating booths with automatic feed and extraction Dkjdpfx Apjyc S Htotet Curing oven (gas burner, control cabinet) Structure with manual overhead conveyor: 3 transfer trolleys with 3 lifting beams (200 kg per beam) 2 lift stations for loading and unloading parts 36 lifting beams in total Operation with 3 beams simultaneously Compatible with Qualicoat and Qualilaquage certification Maximum part dimensions per lifting beam: Maximum part length: 7200 mm Maximum part height: 2400 mm Maximum part width: 500 mm (configuration for 1000 mm width possible) The line is to be dismantled and removed on site Price: €150,000 (excl. VAT) If you have any questions or need further information, please do not hesitate to send us a message or call us. Viewing is possible.

Condition: like new (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: Nr/ 531, We offer this Concept Stal - CS-GPW cut-to-length and slitting line, as new, year of manufacture 2020. Manufacturer: Concept Stal Model: - CS-GPW Year: 2020 Condition: as new Category ID: 1043 Type ID: 1660 Type: Cut-to-length and slitting line If you have any questions or require further information, please send us a message or call us. The line consists of: 1. Sheet steel feeder stand, max coil weight 6000 kg 2. Working module 3. Guillotine 1250 mm Dsdjyi U Ugspfx Aptjkt 4. Sheet feeding and slitting module (roller blades) 5. Production table (automatic) 6. Product collection trolley 7. Protective film application module 8. Hydraulic-electric sheet coiling module 9. Compressor

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, overall weight: 4,000 kg, Good morning, Dkedpfxezd Ag Ss Aptet We have a German-made Meba automatic bandsaw for sale. The machine is in virtually perfect condition. Below is a description of the machine and its features. Designed for fully automatic and efficient production in the steel industry and trade, for cutting solid materials and difficult-to-machine materials. A 2-column automatic machine for cutting at a 90° angle, with a heavy, closed design that dampens vibrations. Minimal space requirement with the highest demands and best cutting results. Technical data: Parameter Round stock Rectangular profile Cutting range: 90° ø 430 mm 430 x 430 mm Maximum machine load: 1000 kg/m Cutting length: * Single stroke: 0 - 600 mm Multiple stroke: 0 - 9999 mm Cutting speed: AC frequency-controlled drive 15–150 m/min, stepless. Adjustable via NC control. Drive power: * Cutting blade: 7.5 kW; 400 V, 50 Hz Hydraulic system: 0.37 kW Coolant pump: 0.37 kW Cutting frame feed: Stepless up to 300 mm/min Cutting blade tension: Hydraulic Cutting blade dimensions: 6220 x 41 x 1.3 mm Length of lead-in (waste): In automatic mode: 25 mm (rectangular material) / 50 mm (round material) Working height: 750 mm (without mounting elements) Weight: 4100 kg Dimensions (L x W x H): 1700 x 3100 x 2350 mm (including chip conveyor) Equipment: -Automatic chip ejector -Chip trolley -Blade break sensor -Blade deviation sensor -Zero face (material positioning) -Interface for importing and exporting data via USB memory -Material database (automatic parameter selection, >500 materials, MEBA blade selection) -Oil mist lubrication -Adjustment of clamping force -Package clamp -Receiving table -Gun for rinsing chips from the machine -White color -Status signal column -Central lubrication -Infeed roller conveyor 3000x500 equipped with 9 rollers We are the official distributor of the Meba brand in Poland. The bandsaw has been inspected and found to be ready for further operation for many years to come.

Condition: good (used), ABB 2-Station Robotic Welding Cell You are bidding on a professional, fully functional 2-station robotic welding cell designed for continuous industrial use. The system is ideal for automated, highly efficient MIG/MAG welding across production runs ranging from small batches to large-scale series (e.g., in automotive or mechanical engineering). Thanks to the clever two-station design (shuttle table/parallel stations), the operator can safely load new components or unload finished workpieces on one side while the robot is actively welding on the other. System Components 1. Industrial Robot & Controller (ABB): - Robot Controller: Reliable and robust ABB S4 / S4C generation. - Programming Unit: Original ABB Teach Pendant with joystick for precise programming (teaching) of welding paths. - Auxiliary Axes: Both stations feature synchronized, motorized rotary axes (Nameplate: ABB / ELMO, Type: PS 60/4-50-P-LSS-3985) for optimal workpiece positioning (e.g., for "bathtub" or gravity-assisted welding positions). 2. Welding Technology (Carl Cloos Schweißtechnik GmbH): - Welding Power Source: Cloos GLC 503 QUINTO (High-performance 500A MIG/MAG system). - Cooling: Integrated liquid cooling (water cooling) to maximize the torch head's duty cycle. - Accessories: 2x professional WDI ECORACK bulk wire drums on wheeled trolleys, including robust wire feed conduits leading to the robot. 3. System Control & Safety: - Operator Interface (HMI): Modernized Siemens SIMATIC HMI touch panel for easy control of the entire system, part counting, and error diagnostics. - Safety: Fully enclosed safety enclosure (protective screens against UV radiation and welding spatter) including an integrated extraction system (hose assembly on the robot arm). - Inspection: The system was in industrial use until recently (certified for, among others, renowned automotive suppliers) and bears a valid DGUV Regulation 3 inspection sticker. "A one-stop solution: We would be happy to offer you suitable bank financing for your project." komplett-konzept.leasingo.de Dedpfx Ajztkb Njptokt You can find more items—both new and used—in our shop! International shipping costs available upon request!

Condition: like new (used), Year of construction: 2009, functionality: fully functional, Tool Milling Machine Emco C40 Linear with Digital Display and Path Control – Excellent Condition, Tool Holders, CE-Compliant! Technical Data: Djdpfx Aeyliffeptskt >> Year of manufacture: 2009 Machine No.: BA1GX1201 >> Milling table clamping area: 800 x 400 mm Number of T-slots: 8 Slot width: 14 H8 Slot spacing: 50 mm Maximum load: 300 kg >> Infinitely variable spindle speeds: 10–5000 rpm >> Infinitely variable feed rate: 10–2000 mm/min Rapid traverse X-axis: 5000 mm/min >> Travel X/Y/Z: 450/350/400 mm >> Vertical and horizontal spindle – SK40 taper >> Manual drawbar system >> Quill stroke: 80 mm >> Weight: approx. 2000 kg >> Dimensions (approx.): 2.5 x 2 x 2 m >> Main drive motor: 7 kW >> Spindle brake >> Technical documentation, spare parts diagrams, operating manual >> Folding machine enclosure >> Coolant system >> Machine lamp >> Tool trolley with tool holders About the machine: Offered is a tool milling machine Emco C40 Linear with path control. This universal milling machine is in an almost mint condition. It comes from a government facility where it was only used minimally. The control system is very user-friendly. Switching from vertical to horizontal operation is very easy by simply swivelling away the vertical head. The Emco has been mechanically and electrically tested by us. Take the opportunity to view and test the machine under power at our facility.

Condition: excellent (used), Year of construction: 1997, Frame saw FTAA-60 manufactured by FOD Bydgoszcz. The machine has been technically inspected. Year of construction: 1997 Dkedsv Acnqspfx Aptet Included: - saw - hydraulic feeding trolley - auxiliary trolley - distribution device - control cabinet - rollers

Year of construction: 1982, condition: ready for operation (used), We offer you frame saws: 1. Bogli 71 Frame Saw with Infeed and Auxiliary Trolley and Distribution Device after the Sawmill Dodon I Udxjpfx Aptjkt Sawmill Type: Bogli Marathon 71 - Frame: 710 mm, hydraulic sawmill - Hydraulic adjustment of saws, raising and lowering of roller - 55 kW motor - Carriage with auxiliary trolley, track gauge 90 cm - Distribution unit after the sawmill Everything as shown in pictures no. 1, 2, 3, 4 Price negotiable 2. Linck E 28-28 Frame Saw - Frame stroke: 600 mm Everything as shown in pictures no. 5, 6, 7, 8 Price negotiable 3. Linck Frame Saw with Loading Trolley and Distribution Device after the Sawmill Trak Linck 71 - Frame width: 710 mm - Feed: 12 m/min - Fully hydraulic: hydraulic adjustment of saws, lowering and raising of the roller - Linck hydraulic loading trolley with additional device - Distribution device after the sawmill (bag, wedge) Everything as shown in pictures no. 9, 10, 11, 12, 13 Price negotiable

Condition: used, Year of construction: 2017, HOLZ-HER Edgebanding Machine LUMINA 1380 Used machine Year of manufacture: 2017 Condition: Well-maintained Motorized pressure beam adjustment Edge thickness, roll material: 0.4 - 3 mm Edge thickness, strip material: max. 3 mm with unit FF701 max. 8 mm without unit FF701 max. 15 mm with tool change on the multi-function milling unit Dkjdpfx Apszpzy Ujtjt Edge height: max. 65 mm Workpiece thickness: 8 - 60 mm Workpiece width: min. 60 mm Workpiece length: min. 160 mm Feed speed: continuously variable, 10 - 18 m/min Control system Edge Control 19 with 18.5" touchscreen color display 16:9 ECO MODE energy-saving mode Infeed fence, 1350 mm long Motorized adjustment of infeed fence Joint milling unit 1802, edge feed MG701 SYNCHRO Glue application station Glu Jet GJ302 automatic (refurbished in 2026) Including changeover trolley Including quick-change couplings Including HSK mounting for the unit Including automatic unit detection GLU JET collection container Pressing unit 1913 MOT Cutting unit 1918 (60 mm) pneumatic (2 x 0.45 kW, 12000 min-1) pneumatically pivoting 0/10° Milling unit FR701 6 fully digital NC servo axes. Profile milling unit FF701 4 fully digital NC servo axes. Scraper unit 1929 MOT4 incl. high-gloss kit Surface scraper FK701 Spraying system 1856 for the infeed and outfeed area Spraying system (release agent) after the pressing unit Automatic chain lubrication Adaptive pressure and glue quantity control Location: Bavaria Availability: approx. August 2026

Condition: ready for operation (used), Year of construction: 2022, controller manufacturer: TRUMPF, controller model: Touchpoint TruBend, overall weight: 30,500 kg, total width: 5,150 mm, total height: 2,995 mm, product length (max.): 6,500 mm, Folding Machine manufactured in 2022. This TRUMPF TruBend Center 7030 (B34) features a maximum bending edge length of 3,123 mm and a holder clamping force of 101 t. It includes a 2-axis part manipulator with a travel of 2,653 mm and an automatic loading/unloading system. If you are looking to get high-quality bending capabilities, consider the TRUMPF TruBend Center 7030 (B34) machine we have for sale. Contact us for further details. • Capacities • Max bending edge length: 3,123 mm • Min bending edge length: 200 mm • Min bending width with standard holder: 145 mm • Min bending width with ENW tools: 40 mm • Max box height: 220 mm • Holder clamping force: 101 t • Material thickness: min 0.4 mm; max structural steel 3.0 mm; max stainless 2.2 mm; max aluminum 4.0 mm • Machine construction: Welded steel frame; bending system: Wedge drive; crowning: Included, adjustable via machine control • Manipulation and positioning • 2-axis part manipulator with suction cups (X travel 2,653 mm; stroke 100 mm; 12 suction modules) • 5-axis rear stop; rotary manipulator; front stop; loading pincers • Automatic part positioning and rotation • Speeds • Y-axis rapid traverse: 250 mm/s • Front stop speed: 3,000 mm/s • Part manipulator speed: 3,000 mm/s • Rotary manipulator speed: up to 3 rev/s • ToolMaster Bend speed: 2,400 mm/s • Positioning accuracy • Y-axis: 0.10 mm; X-axis: 0.05 mm; R-axis: 0.05 mm • CNC control • 21.5-inch touchscreen; OS: Windows 7 Ultimate 64-bit • Keyboard and mouse; USB; RJ45 network; Ethernet 10/100 Mbit/s • Internet teleservice / remote diagnostics • Bend angle measurement • Optical bend-angle assistance; integrated camera; graphical comparison of programmed vs. actual angle • Minimum part-side length for angle measurement: 10 mm • Safety equipment • CE certification; rotating safety doors; safety light barriers; working-area access protection • Foot switch with enable function; emergency stop • Electrical data: 80 kVA Additional equipment • Automatic loading/unloading system with storage interface • Automatic blank separation/feeding/transfer; automatic finished-part unloading • Belt conveyor for finished parts; max blank size 3,048 x 1,500 mm • Storage interface included Dksdpszvdc Sofx Aptot • Loading trolley: Not included; Rail set: Not included • Tooling and tool systems • ToolMaster Bend: Automatic hold-down tool positioning and setup; automatic positioning of standard, Pick&Place, and curved holders • Included tooling: 16 standard hold-down tools (160 mm each); 6 Pick&Place hold-down tools; Pick&Place segments 10/15/20/40 mm; corner hold-down tool (199 mm); OBW90 and UBW90 bending tools • ENW equipment: ENW function for tilting hold-down tools; ENW110-40 tool (length 3,123 mm; depth 40 mm); min bending width with ENW tools 40 mm • Additional part handling modules • 12 three-surface vacuum modules (upper/lower/front suction) • 6 magnetic modules; 4 two-surface magnetic modules • Vacuum and magnetic modules can be used together • Software and data capture • TecZone Fold floating license: automatic programming from 2D/3D data, automatic bending program generation, 3D simulation, collision checking, manual modification • Wireless 2D code reader with Bluetooth: barcode and DataMatrix reading; automatic production program loading

Condition: used, functionality: fully functional, Year of construction: 1989, machine/vehicle number: ROD396, DEMAG KBK Crane Ceiling Crane Runway with dimensions approx. 19.5x7m (2x 7m bridge) Payload / Lifting Capacity: 2x 250 kg - 0.25 t Technical Data of the System: Runway made from Demag KBK2 rails, one side with KBKII-R rails featuring integrated power feed System is supplied complete: KBK rails, rail connectors, trolleys, end plates, brackets/hangers etc. including 2 bridges, each 250 kg including 2x 250 kg Demag DC chain hoists Crane is dismantled and immediately available Used condition, see pictures Dedpjxdvn Ajfx Aptjkt Item location: 75053 Gondelsheim Shipping by freight carrier or collection only by appointment Demag KBK1, KBK2 and KBK3 rails are in stock! Other KBK systems available. Load capacities from 125 kg to 1600 kg Please inquire about your crane runway with required capacity and dimensions, non-binding.

Year of construction: 2007, condition: good (used), functionality: fully functional, Paint drying chamber MEYER AB / Fanmet OY 17m3 Year of construction 2007 )2009 installed ) Manufacturer MEYER OY Finland was used for drying lacquered furniture parts. Feeding with tray trolleys Length 3600mm width 2150mm height 2200mm Dksdpfx Apott Sy Rotet approx. 17m3 electric heating total power 30 kw 18 heating units, each with 1667W, 400 V (length 2360mm) Air flow: 3m3 /sec or 10,000m3 /hour Inner cladding galvanized sheet steel 2 VEM fan motors ( 3,6kW+0,37kW ) ATEX Thermostat 0-120C Overheating protection 0-210C ATEX compliant 94/9/EC CE marked

Condition: used, Smoke chamber 1 trolley Dkjdpfxjwr A Eyo Aptst Adjustable air circulation Pneumatically controlled fresh air, exhaust air, and smoke damper Cleaning: foam cleaning Smoke feeding: on customer request Smoking material: wood chips Without the after-burning system

Condition: good (used), Franz Haas Wafer Stick Baking Oven, Model EWB 1/1, completely refurbished. The machine is constructed from ASIS 304 stainless steel (with the main frame made of carbon steel). The oven is equipped with a rotating ring, which has adjustable speed control to achieve the desired baking characteristics for the wafer sticks. The ring has been cleaned and checked (re-aligned), and the supports/bearings are brand new. Fans have been replaced with new units. The exhaust outlet and flange have been replaced for quick installation. The machine comes with two extruders with bushings for ribbon forming and tube diameter shaping. Equipped with a cutting knife featuring a pneumatic actuator and photoelectric sensor for precise cutting (tube length adjustment is possible). The oven includes a stainless steel batter tank mounted on a frame with a trolley. Fitted with pumps that feed batter from the tank onto the ring surface. Comes with a new control panel and a new gas pressure regulator. Speeds of the ring and pumps are adjustable via frequency inverters. Dimensions: length 3200 mm, width 1400 mm, height 1700 mm. The machine is powered by natural gas, high-methane type, symbol E (previously GZ 50). Dksdpfxoywgaxj Aptjt Electrical requirements: 3x400V / 16A, consumption approx. 2.5/3 kWh. The machine has undergone a complete overhaul. All thermal elements have been replaced with new, environmentally-friendly components—resulting in lower gas consumption and enhanced efficiency. Output: approx. 120-150 kg per 8 hours.

Condition: excellent (used), Year of construction: 2012, machine/vehicle number: 0-250-21-1457, functionality: fully functional, operating hours: 602 h, power: 2.3 kW (3.13 HP), workpiece length (max.): 200 mm, workpiece width (max.): 70 mm, workpiece height (max.): 850 mm, workpiece weight (max.): 35 kg, total height: 1,895 mm, total length: 2,920 mm, total width: 1,538 mm, overall weight: 1,450 kg, table length: 3,050 mm, Equipment: CE marking, documentation/manual, Offering for sale a Weeke Optimat BHX 055, a CNC-controlled vertical machining center. The reason for the sale is a restructuring of production. Year of manufacture: 2012 Horizontal drilling unit with 4 spindles in the X-direction Horizontal drilling unit with 2 spindles in the Y-direction Notch saw, D=100mm, in the X-direction Milling motor incl. frequency converter, 5 kW Workpiece-length-dependent machining in the X-direction Workpiece length: min. 200mm Workpiece length: max. 3050mm Workpiece width: max. 70mm Workpiece width: max. 850mm Workpiece thickness: min. 12mm Workpiece weight: max. 35kg Control program: WoodWOP 6.0 The machine has been in operation since February 8, 2012. Dsdpfx Aozy U H Ajptskt During this time, 33,094 parts were machined. Total machine operating time: 602.85 hours. The sale includes the drills and milling cutters. The machine is still connected and can be tested.

Condition: like new (used), Year of construction: 2025, Equipment: auto duplex, Demo system AccurioPress C14010S Low usage, only employed for presentations. Meter count available upon request. Configuration can be customized as required. Shown here: C14010S with white toner, equipped with KM-Controller IC-610 IM-104 Intelligent Media Sensor (internal) for paper characteristics and IM-105 Intelligent Media Sensor (internal) for paper sizes Dkodsxgqr Ijpfx Aptet PF-812 (vacuum paper feed unit for banners up to 980 mm) RU-518 Relay Unit (cooling/decurling unit) IQ-601 with VI-514 LS-507 including 1 trolley TU-510e Trimmer Unit SD-513 Booklet Finisher with 3-side trimming, crease, and spine pressing Sale/rental exclusively within Germany! Price upon request! Unfortunately, we regret to inform you that we do not conduct sales outside of Germany. We kindly ask for your understanding in this matter and request that you refrain from making further inquiries regarding this issue.

Year of construction: 2023, condition: like new (used), functionality: fully functional, We offer this as new SOLAR PHOTOVOLTAIC (PV) PANEL/MODULE PRODUCTION LINE, year of construction 2023. A solar panel manufacturing facility for sale capable of processing both PERC and TOPCon solar cells and producing a wide range of popular PV modules currently demanded in the market. The fully automated production line has an annual capacity of 250 MW and can manufacture various module configurations, including 450W, 585W, and 630W class modules with TOPCon 16BB technology, available in black frame with black backsheet, glass-to-glass, white backsheet, and transparent backsheet options. The facility is also capable of producing 10BB PERC modules up to 550W. Equipped with a double-layer double-chamber laminator, automatic framing system, automatic sorting system, and fully integrated high-efficiency manufacturing processes, this turnkey production line offers flexible production capabilities for today’s leading solar panel designs. With a highly competitive price, this is a rare investment opportunity for serious buyers seeking to enter or expand in the solar PV manufacturing industry. Popular panel types like 550 W PERC , 585 W TOPCON Glass to Glass ; 630 W TOPCON Glass to Glass can be produced with this line. Manufacturer: ARGUS SUNIC Model: 2023 Year of manufacture: 2023 Condition: as new Category ID: 33 Machine type: SOLAR (PV) PANEL PRODUCTION LINE Production capability: Complete photovoltaic (PV) module manufacturing line covering the entire production process from cell stringing to final testing and sorting Supported solar cell types: 182 × 182 mm 10BB PERC (M10); 210 × 210 mm 12BB PERC (M12); 182 × 182 mm 16BB TOPCon (M10); 182 × 210 mm 16BB TOPCon (G12R) Layout: Existing layout is shown in the photos Includes Tabber & Stringer Includes Automatic Robot Layup System Includes Automatic Glass Feeding & Transfer System Includes EVA Cutting & Layup Machines Includes TPT/Backsheet Cutting & Layup Machine Includes Automatic Bussing Station Includes Automatic Taping Station Includes Automatic Double Glass Feeding & Die Spotting Machine Includes Automatic Double-Chamber Laminator Includes Automatic Frame Gluing & Framing Machine (3-in-1) Includes Automatic Edge Banding Machine Includes Automatic Edge Trimming Machine Includes Junction Box Glue Filling Machine Includes Junction Box Gluing Machine Includes EL Inspection System Includes IV Module Tester (A+A+A+ Class) Includes Hi-Pot Tester Includes Automatic Module Sorting Machine Includes Automatic Laser Scribing Machine Includes Solar Cell Tester Includes Automatic Corner Grinding Machine Includes Automatic Corner Wrapping Machine Includes Automatic Module Loading & Unloading System Includes Plate Chain Curing Conveyor Includes Glass Stacking Machine Includes Visual Inspection Stations Includes Flip Inspection Table Includes Conveyor Systems (Transverse & Longitudinal) Includes Buffer Stations Includes Rotary Units Includes Corner Turning Units Includes Barcode Printing System Dksdeznmhhepfx Aptot Includes Control Cabinets Includes Material Handling Trolleys & Auxiliary Equipment If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: new, new ! all stainless steel with 160 mm-head 40 kW Capacity: ± 2.500 kg/h grinder for fresh and frozen meat: 0°C to -8°C Dksdpfx Aozx Uy Toptjt dimensions (l x w x h) : 3.000 x 2.000 x 2.000 mm + Loader for eurobins + Tool trolley for 160 mm grinder The automatic cross-feed meat grinder is a robust and versatile machine, designed for the efficient processing of both fresh and frozen meat down to -8 °C, as well as other food products. Thanks to its integrated angular feed system, the product is delivered evenly and in a controlled manner, resulting in consistent and high-quality grinding. The machine is constructed entirely from stainless steel, including the cutting worm, feeding worm, and worm housing, ensuring optimal hygiene, durability, and easy cleaning. Operation is controlled via an electronic control panel, allowing the user to select between two speeds for both the feeding worm and the cutting worm. Combined with various knife configurations, this enables a wide range of cuts, from coarse to ultra-fine grinding. For operator safety, the grinder is equipped with an observation platform that automatically stops the machine when opened, as well as a safety rail around the feeding area that immediately halts operation upon contact. Optionally, the grinder can be fitted with a loading system for 200-liter standard meat carts. This system is available in two versions: a column-type or a hydraulic side-loading variant, depending on the specific needs of the user.

Condition: ready for operation (used), Year of construction: 2022, travel distance X-axis: 1,500 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 750 mm, controller manufacturer: HEIDENHAIN, controller model: TNC 355, table load: 4,000 kg, spindle speed (max.): 1,800 rpm, spindle motor power: 20,000 W, number of axes: 5, This 5-axis SHW PowerSpeed 4000 CNC horizontal machining center was manufactured in 2022. It features an impressive X-axis travel of 1,500 mm, Y-axis travel of 1,000 mm, and Z-axis travel of 750 mm. The machine includes a rotary table with a diameter of 1,400 mm and a maximum table load of 4,000 kg. If you are looking to get high-quality machining capabilities, consider the SHW PowerSpeed 4000 machine we have for sale. Contact us for further details. • Bosch Servodyn servo drives; individual AC drives on X/Y/Z • Status / Condition: Machine connected and operational; very good technical condition; regularly maintained; available for inspection under power • Documentation: Complete technical, electrical, programming, transport and maintenance manuals; large documentation package included • W (quill) 115 mm • Rotary table: RT 5D, Ø 1,400 mm; controlled axes X, Y, Z, W, B (table); 7 T-slots + center slot; T-slot 22 mm (DIN 650); spacing 160 mm; center bore Ø 100 H6; max speed 2.5 rpm; table weight ~2,800 kg • Spindle: 95 mm front bearing diameter; horizontal and vertical milling spindle capability • Feed rates: Infinitely variable; 2–8,000 mm/min; rapid 8,000 mm/min • Tool clamping force: Horizontal 16,000 N; Vertical 10,000 N • Machine configuration and features: Horizontal machining center with automatic indexing rotary table; full enclosure; automatic lubrication system; Bosch Servodyn drive package; Heidenhain CNC control; large electrical cabinet with climate-controlled cooling units • Main capacities (summary): W 115 mm; rotary table Ø 1,400 mm Additional equipment • Vertical milling head (attachment) • Tool holders (as visible in photos) Dkjdpfxjzgd I Aj Aptot • Tool trolley (as visible in photos) Technical Specification Taper Size ISO 50

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 235.1068, Title: Komax Kappa 235 Automatic Wire Cutting and Stripping Machine – 2006 Description: For sale: Komax Kappa 235 automatic wire cutting and stripping machine, manufactured in 2006. The machine is suitable for cutting and stripping a wide range of cables and wires. Technical specifications: Manufacturer: Komax Djdpfxjzzpxco Aptokt Model: Kappa 235 Year of manufacture: 2006 Voltage: 115/230 V Wire cross-section range: 0.22–35 mm² Flat cable processing: up to 40 mm width RS232 interface Cutting and stripping functions Extensive accessories and spare parts are included: Numerous cutting and stripping blades / knife sets V-blades Various blade holders Elastomer feed rollers Additional steel knurled feed roller set Various cable guides Guide tubes Inner-wire stripping unit Length measuring unit Additional mechanical parts and accessories Various original Komax spare parts A considerable quantity of tooling, blades, rollers, and spare parts is supplied with the machine, as shown in the photos.

Condition: excellent (used), functionality: fully functional, Frey F-LINE F222 Vacuum Filler with Loader and Integrated Grinder Attachment Brand: Frey Model: F-LINE F222 Grinding system: Integrated grinder (mincing attachment) at the outlet, allowing simultaneous grinding and filling of the product. Loading system: Integrated mast-type hydraulic lift for standard 200-liter meat trolleys. Equipment: - Large, conical loading hopper. - Integrated control panel with digital display and numeric keypad. - Analog pressure gauge (manometer). Dkjdpjyku Ucsfx Aptot The Frey F-LINE F222 in this configuration is a complete production center for demanding meat processing facilities. Thanks to the use of the grinder system, the machine not only fills but also performs final mincing of the product directly before it enters the casing, ensuring excellent filling structure and improved color. The inclusion of a hydraulic mast loader significantly increases work efficiency by eliminating manual feeding of material and optimizing internal logistics within the facility.

Year of construction: 1999, condition: reconditioned (used), Rotary tablet press EU1"-441 – 29 stations + EU-B – 43 stations This high-performance tablet press is designed for the production of tablets with a maximum diameter of 25 mm using the EU-441 rotor and a maximum diameter of 13 mm using the EU-B rotor. The tablet press is suitable for producing shaped tablets (guided tooling). Dodpfx Aezl Tigoptjkt Technical specifications Max. pressing force: 100.0 kN Pre-compression: 100.0 kN Max. tablet diameter: 13.0–25 mm Max. filling depth: 18.0 mm (with corresponding filling curve) Max. tablet thickness: 8.5 mm Die speed: 15–120 rpm Performance EU-441: 26,100 to 174,000 tablets/h EU-B: 38,700 to 309,600 tablets/h The machine is equipped with four frameless, double-walled plastic doors. This makes the die table easily accessible for cleaning and tool changes. The main drive, gearbox, and a central lubrication system are located in the machine cabinet. At the rear of the machine is a connection for an external exhaust and filter system, which keeps the pressing chamber largely dust-free. Product feed The product is fed in via a stainless steel hopper and directed into the Fill-O-Matic mixing impeller shoe. From there, the dies are filled. The mixing impeller shoe can be easily removed for cleaning. The finished tablets are discharged via a discharge chute and collected. Rejected tablets are automatically separated via a sorting diverter. Monitoring system The machine features a monitoring system with: Tablet jam monitoring Level control Filling hopper monitoring Measurement of the resistance of the punches Ejection force measurement Individual rejection The system enables: Statistical evaluation Documentation via printer Permanent press force monitoring Automatic adjustment of the press force Automatic rejection of defective tablets Quick stop in case of exceeding limit values. Electrical equipment The electrical installation is located in a separate control cabinet, which can be positioned independently of the machine. The following additional devices can be connected: Vertical dust collector Metal detector. Scope of delivery Machine without tableting tooling Filling curves for: EU-441 (10 mm and 12 mm) EU-B (8 mm) The changeover rotor is located on a Fette rotor trolley, which is included in the scope of delivery. If required, a control system upgrade can be offered. Machine and operating manual as well as validation documents are available in German. Condition Approx. 34,000 operating hours Regularly maintained Very good mechanical and visual condition.

Condition: ready for operation (used), Year of construction: 1990, functionality: fully functional, CNC Table Type Boring and Milling Machine - Horizontal | Brand: UNION Type: BFT 105 | Year of construction: 1990 Machining operations: Boring, reaming, deep boring, precision boring, reaming, countersinking, tapping, milling, circular milling, thread milling. The machine can be inspected under power by prior appointment. Condition: Very well-maintained, second-hand / operating condition. TECHNICAL SPECIFICATIONS: - Travels: - X-axis (table transverse movement): 1.750 mm - Y-axis (headstock vertical movement): 1.250 mm - Z-axis (table longitudinal movement): 1.175 mm - B-axis (table positioning): 360° - W-axis (boring spindle axial adjustment): 450 mm Clamping table: - Clamping surface: 1.250 x 1.400 mm - Maximum workpiece weight with centric clamping: 4 tons - T-slot spacing: 125 mm - T-slot width: 22H7 mm - Centring bore: 250 mm Boring spindle: - Diameter: 105 mm - Axial adjustment: NC-controlled - Tool holder: * with tapered shank: A 50 TGL 7837 * with steep taper: A 50 DIN 2080 * with clamping bolts: UNION 95-2805 (A 50 TGL 42620) DIN 69872-28 Speed ranges: - 3 continuously variable ranges: 4 – 2.500 rpm - Drive power: 23,7 kW - Max. spindle torque: 2.500 Nm Feed rates: Continuously variable feed range Dkedpfozlal Iox Aptot - X, Y, Z axes: 1 – 5.000 mm/min - Rapid traverse, X, Y, Z-axes: 10.000 mm/min W-axis: 5.000 mm/min B-axis: 3,2 rpm - Max. feed force: X and Y-axes: 16.000 N Z-axis: 25.000 N Specifications: - Total connected load: 50 kW/130 A - Voltage/frequency: 380 V/50 Hz - Machine weight (approx.): 17 tons - Dimensions: 6.560 x 4.370 x 3.450 mm EQUIPMENT: - 5-axis path control: Heidenhain TNC 355 - Swivelling control panel with central control station - Electronic handwheel - Other comprehensive ranges of accessories, such as tool holders, drill bits, milling cutters, and tool trolleys and cabinets ... - Comprehensive documentation available (foundation plan, circuit diagrams, hydraulic documentation, operating instructions and spare parts lists, programming lists) No guarantee is given for the completeness and accuracy of the technical information and equipment. - Subject to prior sale -

Condition: good (used), Year of construction: 2018, functionality: fully functional, Equipment: CE marking, scorer, Horizontal panel dividing saw / Horizontal panel saw with lifting table feed Manufacturer: SCM / Gabbiani Type: Gabbiani ST 115 Year of manufacture: 2018 Horizontal beam saw with lifting table feed from the rear, originating from a parquet factory. Dsdpjzyx Evofx Aptjkt Cutting length approx. 3200 mm Cutting depth on the lifting table approx. 1850 mm Max. stack height on the lifting table (with supports) approx. 600 mm Saw blade projection 115 mm Variable saw carriage speed 0 - 135 m/min. Variable sliding table speed 0 - 70 m/min. Motor of the main saw blade approx. 9 kW Main saw blade speed 3900 rpm Saw blade diameter 400 mm Motor of the scoring saw approx. 1.8 kW Scoring saw speed 6300 rpm Scoring saw blade diameter 160 mm 6 clamping devices (3 of which with front aligner) 2 air cushion tables, each with blower Voltage: 400 V, 3 phases, 50 Hz, 43 A Weight approx. 5500 kg Data partially estimated and taken from the brochure.

Condition: used, Year of construction: 2005, We offer the RISCO RS 503 vacuum stuffer with burger attachment— a professional set for large meat processing plants and ready-made meal producers. The machine is ideal for the production of burgers, cutlets, meatballs, minced meat products, and classic sausages, ensuring high efficiency, repeatable portion weight, and excellent stuffing structure. The RS 503 model (2005) is equipped with an advanced RS 70 linear grinder, which grinds the stuffing directly during filling. This system guarantees a uniform structure, better consistency, and higher total yield of the final product. The stuffer operates at a capacity of up to 6,500 kg/h, and the portioning speed reaches 700 portions per minute, which allows it to handle lines with very high production loads. Djdpfx Apeym A A Tjtskt The large 350 l hopper is designed to work with 200 l trolleys, and a special feeding system ensures continuous, even filling of the vane pump chambers – without voids or air intake. The burger attachment, mounted with the stuffer, forms uniform patties from the minced meat onto a conveyor belt, creating a complete line for the production of burgers ready for further heat treatment or packaging. The device is controlled by a panel that allows for easy setting of parameters: stuffing and grinding speed, grinder power, portion size, operating modes, and quick program changes. Thanks to high-performance servo drives, the RISCO RS 503 stuffer can be quickly connected to other devices, such as automatic clippers, dividers, formers, or packaging systems. Technical data: Manufacturer: RISCO Stuffer model: RS 503 Year of manufacture: 2005 Filling machine power supply: 400 V, 3 phases, 50 Hz Installed power: 14 kW Filling machine weight: approx. 1060 kg Filling capacity: up to 6,500 kg/h Portioning speed: up to 700 portions/min Hopper capacity: 350 l (for 200 l trolleys) Burger attachment power supply: 230 V The RISCO RS 503 vacuum filler with burger attachment is the ideal solution for manufacturers who want to combine high performance, precise portioning, and burger forming in one reliable set for large-scale food industry applications.

Condition: excellent (used), functionality: fully functional, ELMAG SER-FC-CS45 painting line for joinery 1. Automatic transport system with: – Trolleys: 40 units – Max. permissible total weight: 6000 kg – Trolley length: 3000 mm – Feeding system: automatic – Trolley rotation: automatic 2. Painting booth: – Dimensions: 4080 x 2000 x 4000 – Power: 4 kW – Flow rate: 14,000 m3/h 3. Flow coating system: – Length: 4000 mm – Valve height: 4500 mm – Usable working height: 2500 mm Dksdpjzk Epcsfx Aptet – Pump flow rate: 500 l/min – Valve construction: stainless steel – Capacity of the paint valve: 200 l 4. Drying chamber: – Dimensions: 13,000 x 2900 x 4100 5. Air purification system (inlet + recirculation filters): – Air flow: 7000 m3/h – Painting line compressor – Air purification system (inlet and recirculation filters) Air flow: 15,000 m3/h – Thermal power: 110,000 kcal/h