Used File Paternoster for sale (630)

Condition: excellent (used), Year of construction: 1995, functionality: fully functional, machine/vehicle number: 0/130084, total width: 5,000 mm, load capacity per storage section: 220 kg, construction height: 2,800 mm, input voltage: 400 V, input frequency: 50 Hz, Used storage lift / paternoster / shelving unit / organizational aid, fully functional, manufacturer: Eska Rollenpaternoster Application: workshop, warehouse, sales, retail, auto parts, etc. Type: TRPA, machine no. 0/130084 Overall height 2800 mm, overall width 5000 mm, circle diameter 685 mm, number of levels: 9, total load capacity 1980 daN The storage lift is fully functional and is no longer needed by us. Shipping is only possible with payment of costs and advance payment (net). Bsdpfx Ahe Aa Rffsrslp Sold as is, we assume no warranty or guarantee, no returns.

Condition: new, Year of construction: 2026, Equipment: safety light barrier, 1A Gmatick Storage Paternoster (roll rack) Bodpsff Huwjfx Ahrjlp The foil storage Paternoster foils is suitable to use for the storage of all 3D-films, it is used as a high storage at the membrane press or as a space-saving storage solution for the 3D foils. With our Paternoster you can storage on very small area approximately 2, 4m x 1, 2m a lot of film rolls (up to 32 rolls of a Ø 300 mm). The required film is thus immediately available at the push of button. Our Paternoster are available from 2.8 m up to 6, 0 m as standard Paternoster. Also special solutions are offered by us, please contact us, we will then find the right solution for your storage. As additional equipment we offer center sleeves, a manual cutting station or the full automatic cutting device and we have also ionization solutions available at Gmatick. • Storage rods ø 42.4 mm • Sleeves inside Ø max. 82 mm,. • Load chain as a hollow pin chain with a breaking load of 100 kN, • Chain pitch is 50 mm hole to hole and this is the raster for the positioning of the mounting foil bars. • Control with a key switch (dead man) for on / off • Rotational speed of the chain is approx. 5.5 m / min • Voltage 400 V, 3N; 50/60 Hz or as USA Version 480V 60Hz • Mains cable with CEKON plug 16A fuse protection (by the customer) 10A slow blow • ground load data at least 2, 2 kg / cm² • Side covering over the entire height of the Paternoster, guards from 2, 2 m above floor to top edge of the Paternoster. • Requirement for the installation of the Paternoster is a viable, flat and solid floor, • Floating floors you can’t install a Paternoster. It is forbidden

Condition: used, Year of construction: 2013, machine/vehicle number: A1 /000149, functionality: fully functional, input voltage: 400 V, input current: 63 A, input frequency: 50 Hz, type of input current: three-phase, travel distance X-axis: 13,600 mm, travel distance Y-axis: 3,000 mm, travel distance Z-axis: 1,600 mm, workpiece length (max.): 13,600 mm, workpiece width (max.): 1,250 mm, workpiece height (max.): 300 mm, workpiece weight (max.): 2,600 kg, number of axes: 8, number of slots in tool magazine: 11, controller manufacturer: osai, actuation type: electric, total height: 3,500 mm, total length: 31,000 mm, total width: 6,500 mm, overall weight: 18,000 kg, table length: 13,600 mm, table width: 1,250 mm, year of last overhaul: 2026, Equipment: CE marking, documentation/manual, Cutting center for glulam beams, solid wood beams, and X-lam panels with a width of 1250. Machine equipped with software for converting files into BTL language. Designation: FORA CNC Milling Machine Brand: SCM ROUTECH Model: OIKOS 12 Bljdpoz Hcp Aofx Ahrjp Type: OIKOS12 HT Serial number: A1/000149 Year of manufacture: 2013 Weight: 18000 kg Rated voltage: 400 V Number of phases: 3 Rated current: 63 A Frequency: 50 Hz Reference: 3-577 If you have any questions or require further information, please do not hesitate to send us a message or call us.

Condition: excellent (used), Year of construction: 2023, We have a Kardex Shuttle XP 500 from 2023 for sale, in very good condition. The machine has been regularly serviced by the manufacturer and is well maintained. With a height of 11,950 mm, 48 trays measuring 3,650 × 813 mm, and a load capacity of 440 kg per tray, it provides approximately 143 m² of storage space while occupying only 5.93 m² of floor space. Equipped with a light pointer and confirmation buttons, it offers an efficient picking solution when connected to a business system or WMS. An excellent solution for maximizing storage capacity while minimizing floor space. Technical Information: Model year: 2023 Model: SHUTTLE-XP-500 3650 × 813 Machine height: 11,950 mm Machine width: 3,980 mm Bledpfx Ahe Aaif Rerjp Machine depth: 2,912 mm Tray dimensions: 3,650 × 813 mm Number of trays: Approx. 48 per machine Maximum load per tray: 440 kg Electrical connection: 3/N/PE, 230/400 V, 17 A

Condition: new, functionality: fully functional, Equipment: safety light barrier, Replacement controller for storage lifts and paternoster systems. With our "LTG StoreControl LL and StoreControl P" control systems, we are able to modernize paternosters and lifts that have a defective Cedes Safe C200 or Safe C400, for example, and keep them operational for many years to come. Our control systems fit storage systems of all manufacturers and types. The storage systems can remain fully loaded for the conversion. We can also provide special solutions as well as software connections. Bledpfx Ahjq Rcmterjp

Condition: excellent (used), functionality: fully functional, Year of construction: 2019, operating hours: 467 h, total length: 840 mm, total height: 1,020 mm, total width: 750 mm, overall weight: 500 kg, input voltage: 400 V, input frequency: 50 Hz, feed length X-axis: 500 mm, feed length Y-axis: 400 mm, feed length Z-axis: 510 mm, space requirement length: 840 mm, space requirement height: 1,020 mm, space requirement width: 750 mm, 3D printer Evotech EL 102 – professional-grade machine with a large build volume. Original price: €60,000. Inspection possible in Upper Bavaria. Only 467 operating hours! For sale: an Evotech EL 102, a professional FDM/FFF 3D printer manufactured in Austria. This machine is ideal for prototyping, small-batch production, and the manufacturing of functional components with the highest quality requirements. Price negotiable. Technical specifications: - Model: Evotech EL 102 - Printing process: FDM/FFF (Fused Filament Fabrication) - Build volume: approx. 500 × 400 × 510 mm - Extruder: 2 independent extruders (dual extrusion) Bjdpfx Ahjztn Dzsrjlp - Nozzles: 0.4 mm standard (replaceable, other sizes optional) - Layer thickness: 0.05 – 0.6 mm - Print bed: heated, PEEK or metal print plate - The print bed is equipped for mounting print plates with a vacuum system. - Automatic print bed calibration before program start. - Materials: ABS, PLA, PETG, PA, PEEK…, technical filaments with CF+GF and support material. - Two independent filament drying chambers for a better and cleaner process. - Print head and drive servos are cooled. - Temperatures: Extruder up to 410 °C, heated bed up to 120 °C, build chamber heating up to 100°C - Software: compatible with Simplify3D, Cura, Slic3r - File formats: STL, OBJ, G-Code - Power supply: 400 V, 50/60 Hz - Dimensions: approx. 840 × 750 × 1020 mm - Weight: approx. 500 kg Features & Advantages: - Stable all-metal construction for precise continuous operation. - Large, enclosed build volume for demanding materials. - Dual extruder for multi-material and support structures. - Industrial-grade mechanics & control. - Smooth operation, low vibration. - Optimal for research & development, prototyping and small series production. - The first update package was installed during a service. Condition: - Used, very well maintained. - Fully functional and ready for immediate use. Spare parts + consumables as well as various filament types are included. See pictures. Service: - Loading with a forklift possible. - Transport via freight forwarder. - Offered price is net. - Invoice with VAT possible. We are selling because the machine no longer fits into our service portfolio.

Condition: like new (used), Year of construction: 2015, For Sale: Bodpfxjz Epddo Ahrslp Brand: Kaak Driem Type: Sheeting Bread Line Year of Construction: 2015 The line has already been disassembled and cleaned. It will be reassembled around mid-January. Currently offered for sale for €280,000. Please refer to the PDF file for the complete description and specifications. Layout drawings, electrical diagrams, and parts lists are available. It is possible to view this line at our location. If you have any questions or comments, please do not hesitate to contact us. Sincerely, Leo Holland

Condition: used, Year of construction: 2017, functionality: fully functional, machine/vehicle number: 0266, year of last overhaul: 2026, workpiece weight (max.): 3,600 kg, power of the milling unit: 10,250 W, disc diameter: 200 mm, cutting length (max.): 30 mm, Подробна информация за машините е описана в прикачения файл. Bledpoztyhrjfx Ahrop Detailed information about the machines is provided in the attached file.

Condition: used, Year of construction: 2016, functionality: fully functional, machine/vehicle number: 6582016004, year of last overhaul: 2025, workpiece weight (max.): 2,000 kg, power of the milling unit: 8,400 W, disc diameter: 250 mm, cutting length (max.): 30 mm, Подробна информация за машините е описана в прикачения файл. Detailed information about the machines is provided in the attached file. Bedpfsztxtaox Ahrolp

Condition: good (used), Maximum part length: 3 m Bledpfxjzzq S Rj Ahrjp Maximum package depth: 1 m Maximum package height: 1.7 m Equipped with a Siemens control system

Condition: good (used), Kardex Type: SYS - 250-4010-5-13 Device No.: 26596 Year of Manufacture: Device height: approx. 6000 mm Device width: approx. 3000 mm Device depth: approx. 1100 mm + 350 mm tabletop Bjdpfx Aozk Ew Hshrjlp Number of trays: 40 Tray width: approx. 2500 mm Tray depth: approx. 410 mm Tray height: approx. 230 mm Tray load capacity: 150 kg Total load capacity: 6000 kg Color: Gray Device C in the photo.

Condition: good (used), Kardex Type: IND 400 Equipment No.: 25377 Year of manufacture: Equipment height: approx. 6000 mm Equipment width: approx. 2920 mm Equipment depth: approx. 1100 mm + 350 mm tabletop Number of trays: 34 Tray width: approx. 2250 mm Tray depth: approx. 350 mm Blsdpfx Ahozk Ewgjrop Tray height: approx. 260 mm Load per tray: 257 kg Total load: 8738 kg Color: Gray Equipment A in the photo.

Condition: good (used), Kardex Type: IND 250-4010-5-13 Equipment No.: 122/25922 Year of Manufacture: Equipment height: approx. 6000 mm Equipment width: approx. 3000 mm Equipment depth: approx. 1100 mm + 350 mm tabletop Number of trays: 40 Tray width: approx. 2500 mm Tray depth: approx. 410 mm Tray height: approx. 230 mm Tray load capacity: 195 kg Total load capacity: 7500 kg Color: Gray Bodezk Ewyjpfx Ahrslp Equipment B in the photo.

Year of construction: 2007, condition: ready for operation (used), A vertical carousel storage system (office lift) Hänel with front access is available. Trays: 18, tray arrangement: 4-lane, max. stack load per tray: 132kg, machine dimensions X/Y/Z: approx. 3300mm/1000mm/2850mm, weight: approx. 3000kg, control: MP0A. Documentation available. An on-site inspection is possible. Bljdpsyiflgsfx Ahrsp

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, cutting width (max.): 1,270 mm, cutting length (max.): 1,680 mm, Equipment: documentation/manual, Professional Kongsberg X20 cutting and creasing plotter. This device is extremely versatile and efficient, designed for the production of packaging, POS materials, and the processing of rigid and flexible materials. The machine combines Scandinavian reliability, precision, and flexibility, allowing for quick adaptation to diverse jobs. The unit we have was purchased from a Dutch printing company and was used in the prototyping department. Maximum cutting speed: 30 m/min Acceleration: 3 m/s² Material clamping system: multi-zone vacuum table with a powerful 6 kW vacuum pump, guaranteeing a perfectly flat arrangement even for the most demanding materials. Positioning camera: integrated vision system for reading markers (matching print to cut). Bledpfjz Egiksx Ahrep The machine is equipped with: - a FlexiHead, which allows for the simultaneous mounting and use of three tools in a single work cycle, without the need for constant replacement. - two drag knives: - psaligraphy knife for precise cutting of films and papers - currospeed knife for cutting thick materials, solid and corrugated cardboard - creasing wheels: a set of creasing wheels with a diameter of 26.0mm and different geometries (2pt; 3pt; 4pt), enabling perfect bending of cardboard and carton without fiber cracking. The price of the machine includes a computer with a dedicated control system and i-cut Production Console software, compatible with Artios CAD. The software primarily imports files in pdf, acm, dfx, and ADR formats. The machine is in continuous operation and is regularly serviced by an authorized partner (the last service was performed in January 2026). It is possible to perform tests on customer materials before purchase.

Year of construction: 2015, condition: ready for operation (used), NanoString nCounter Sprint Profiler Analysis System Technical Specifications * Multiplex analysis: up to 800 targets simultaneously * Sample throughput: up to 24 samples per day * Sample capacity: 1–12 samples per run * Hands-on time: approx. 10 minutes * Analytical method: digital molecular counting using fluorescence-labeled reporter probes * Sample preparation and analysis: integrated into a single device * Sample material: total RNA, FFPE-derived RNA, cell lysates, and suitable lysed whole blood samples * SPRINT cartridge reaction volume: 25–35 µl * Dynamic measurement range: up to 6 × 10⁵ total counts Bljdpfxs Afcqqj Ahrep * Data export: digital count values, including as a CSV file * Software: nSolver Analysis Software (check availability and license scope) Device dimensions and weight * Width: 107 cm * Depth: 72 cm * Height: 82 cm * Weight: approx. 95.25 kg Technical description has been adopted. You are welcome to visit us for a demonstration. We can gladly arrange cost-effective shipping for you! You will receive a proper invoice. For foreign customers, a net invoice can also be issued. A valid VAT identification number is required. Subject to prior sale. Visit our shop and view our other offers. The company names and trademarks mentioned are the property of their respective owners and are used solely for identification and description of the products. Deviations from technical data and errors in the description of the article may occur and are subject to change.

Condition: good (used), Year of construction: 2013, The conveyor belt of the company trio-technik is for sale; length: 4500mm Useful width: 680 Bjdpfxom E U T Tj Ahrjlp Height adjustable 850-1150mm Motor protection with 5 meter cable Belt speed constant: 6m/min

Year of construction: 2012, condition: good (used), Type: IND-PA Device No.: 0/1220744/1 Year of manufacture: 2012 Bledshyhlgopfx Ahrep Device height: approx. 5600 mm Device width: approx. 2870 mm Device depth: approx. 4000 mm Number of rollers: 45 Roller width: approx. 2370 mm Shelf load capacity: 200 kg Total load capacity: 9000 kg Color: beige

Condition: ready for operation (used), Year of construction: 1991, A roll paternoster ESKA storage and loading system is available. Roll width: 1600mm, max. load capacity: 2800kg, total height: 4300mm. Documentation available. An on-site inspection is possible. Bodpfx Ahow I E Dcorjlp

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, machine/vehicle number: 133, product width (max.): 270 mm, working width: 270 mm, type of input current: three-phase, Equipment: documentation/manual, Semi-rotary flexographic printing machine MALBATE Mecaformat 270. 5 printing units + 1 varnish unit + rotary magnetic die-cutting unit. UV drying – 6 drying units. Compressed air: 7/8 bar. Maximum web width: 270mm Minimum web width: 150mm Maximum feed length: 220mm Minimum feed length: 50mm Maximum printing width: 260mm Maximum printing length: 305mm Maximum length of the semi-rotary cutting die: 220mm Maximum permissible unwind roll size: 3000m Unwind roll diameter: 800mm Rewind waste roll diameter: 450m Rewind roll diameter on the automatic splicer (AS): 360m Maximum speed: 10,000 impressions/hour The machine is currently in production. An inspection can be arranged by appointment. Details are available in the PDF file. For further information, please do not hesitate to contact us. Bsdpfx Aheyr R Sgerslp

Condition: like new (used), Year of construction: 2019, We now have two Kardex Megamat RS 650 units available. Both machines were manufactured in 2019 and put into operation in 2020. They have been serviced annually by the manufacturer and are in very good condition. The Kardex Megamat RS 650 is a powerful vertical carousel designed for storing and handling heavy goods. Each carrier (base shelf) can hold up to 650 kg, making the machines suitable for storing large and heavy items. The two machines have a total of 34 carriers (base shelves) and 43 trays: 28 carriers without intermediate shelves, with a height of 348 mm 3 carriers with two intermediate shelves, providing a total of 9 trays with a clear height of 115 mm 3 carriers with one intermediate shelf, providing a total of 6 trays with a clear height of 170 mm Bjdpoz Aiwbofx Ahrolp The machines are also equipped with a Matrix display in the access opening. This LED display shows information such as the picking location, quantity, and other useful details. The Matrix display helps reduce search time and the risk of picking errors, making the picking process faster and easier. To utilize the full functionality of the Matrix display, the machines need to be connected to an ERP or Warehouse Management System (WMS). Technical Information: Model year: 2019 Model: MEG RS 650.1.3250.6.406.34 Machine height: 7,835 mm Machine width: 3,975 mm Machine depth: 1,711 mm Number of carriers: 34 Number of shelves: 9 Maximum carrier height: 348 Carrier width: 3250 Carrier depth: 628 Electronics: 3/N/PE 400V, 20A

Condition: good (used), Year of construction: 2009, functionality: fully functional, The supporting structure is made from a thick, monolithic steel block with a reinforced core. The construction is triangular with a wide base and is designed to ensure the machine's stability under all processing conditions. Bodpey Nv Ucofx Ahrelp Guideway lubrication is centralized, meaning all guideways on the machine are lubricated from a single point. The CNC features a full aluminum worktable with grooves for vacuum limitation or fixture mounting. This type of worktable is especially useful for “NESTING” operations. The electrical cabinet is built according to international standards, ensuring total reliability of the integrated components. Technical specifications: Working dimensions: With vertical milling: 3260 x 1250 mm With drilling head: 3330 x 1540 mm Maximum workpiece height: 180 mm X, Y, Z axis travel: 3420, 1690, 280 mm Tool storage positions: 12 Vacuum pump: 100 m3/h Power: 10.5 kW Rated voltage: 400 V Frequency: 50/60 Hz Machine weight: 3400 kg Software: Xilog3 (supports .dxf file import) Year of manufacture: 2009

Condition: used, Year of construction: 2021, functionality: fully functional, machine/vehicle number: 4301505454, total height: 2,700 mm, load capacity per storage section: 1,200 kg, type of input current: AC, input voltage: 220 V, We are offering this used EP 120 warehouse stacker, manufactured in 2021, for sale. Manufacturer: EP Model: 120 Year of manufacture: 2021 Condition: used Category ID: 695 Bedoz N Hzcopfx Ahrelp Type ID: 2563 Machine type: Warehouse stacker ATTENTION: Private sale, no warranty! If you have any questions or require further information, please feel free to send us a message or call us.

Condition: excellent (used), functionality: fully functional, machine/vehicle number: 309719/20/21/22/23/24/27, total height: 6,635 mm, total width: 2,200 mm, total length: 3,200 mm, load capacity per storage section: 2,50,520 kg, type of input current: three-phase, input voltage: 415 V, warranty duration: 12 months, roll pitch: 75 mm, roll width: 1,830 mm, Equipment: safety light barrier, We have 6 of these machines available, all in good working order. On installation they will be refurbished and have 12 months warranty on all parts and labour. Full Service history. Clean environment. Small cosmetic signs of general wear and tear but on the whole excellent looking machines. Each machine is modular and can be reduced in height to meet most height restrictions. We can offer these as supply only however this would not include the warranty. KARDEX MEGAMAT FSE STORAGE LIFT SYSTEM COLOUR - GREY/BLUE MAX LOAD PER TRAY 250KG - 520KG NUMBER OF TRAYS - 40 MACHINE DIMENSIONS HEIGHT 7960mm Bsdpfx Ahs Aaqacorjlp WIDTH 3250mm DEPTH 2760mm NO WORK TOP TRAY DIMENSIONS WIDTH 2860mm DEPTH 820mm Metal dividers included within machine price - divide the trays internally to accommodate all types of items small and large Operation is currently via a Keypad above the picking port We have bespoke software that can be added to the machines - this would include hardware to allow the software to operate, there is basic operation as full operation with our Epic Netstock. This can be fitted at a later date if required.

Condition: excellent (used), Technical information: Bjdpfx Aez Eqc Ushrjlp 1. Kardex Number of upright frames: 13 Dimensions: L 3.46 x W 1.70 x H 4.8 m Weight of racking unit: 3.5 tons Load capacity per upright frame: 3 tons