Used Fine Blanking Press for sale (14,236)

Condition: used, table width: 1,400 mm, table length: 2,800 mm, total length: 6,600 mm, total width: 2,500 mm, total height: 2,600 mm, No. 3266 Feed-through veneer press Ott D 99 Used Short-cycle feed-through veneer press Pressing surface 2800 x 1400 mm LW Maximum opening width 150 mm Infeed conveyor belt, length 2800 mm Outfeed conveyor belt, length 2800 mm Transport dimensions approx. 6600 x 2500 x 2600 mm LWH Sale on behalf of customer, ex location near 71063 Sindelfingen, without dismantling, without transport and assembly Dismantling, loading, and transport by us optionally available Subject to errors in the description and price Gujdpfjy A Rhkex Aa Ssa To avoid any misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical specifications, condition description, year of construction and scope of delivery according to the manufacturer’s brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Photos and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices plus VAT, payment before collection or shipping Terms of delivery: Ex location

Condition: excellent (used), Offer consisting of: Heidelberg SM52-2P, year of manufacture 2004, complete N+P available. Gusdpsy Aictjfx Aa Sea

Condition: good (used), functionality: fully functional, EMMES EPP 200 Pneumatic Block Gluing Press Maximum gluing length: 2000 mm Number of vertical clamps: 6 Number of frontal clamps: 3 Gjdpfx Aoyynz Asa Seua

Condition: excellent (used), functionality: fully functional, EMMES pneumatic block gluing press Maximum gluing length: 3000 mm Gujdjyynu Aopfx Aa Soa Number of vertical clamps: 8 Number of frontal clamps: 4

Condition: used, pressing force: 100 t, table width: 1,350 mm, table length: 2,550 mm, total length: 3,150 mm, total width: 1,550 mm, total height: 2,150 mm, overall weight: 5,000 kg, No. 04525 Veneer press Ott 300 K 2513 Used Very sturdy design with 4 longitudinal beams in the upper press section and 4 longitudinal beams in the press table Plate dimensions 2550 x 1350 mm LW Total pressure 100 tons Electric heating, replaceable heating elements Heating plates made of solid aluminum, covered with Mylar film Maximum temperature 150 °C Specific pressure 3.0 - 5.0 kg/cm2 4 press cylinders, each 90 mm in diameter Rack-and-pinion guide for the press table Button controls for Open – Close – Stop Circumferential emergency stop pull cord, configured for two-hand operation Opening width continuously adjustable up to approx. 420 mm Automatic pressure regulation via high-pressure gauge Pressure preselection table with 2 specified values for each workpiece size Transport dimensions approx. 3150 x 1550 x 2150 mm LWH Weight approx. 5000 kg To avoid any misunderstandings, an on-site inspection is possible and recommended by appointment Guodpfjy Aplzox Aa Soa Sold as is Technical data, condition description, year of construction and scope of delivery according to the manufacturer’s brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Terms of payment: Prices plus VAT, payment before collection or shipment Terms of delivery: Ex warehouse

Condition: used, Year of construction: 2012, functionality: fully functional, LVD PPEC-7 135/30 Press Brake For sale: professional hydraulic CNC press brake LVD PPEC-7 135/30. This is a high-class, Belgian-made press brake, known for its precision, reliability, and servo-hydraulic control system. The machine is in full working condition and has undergone a complete technical service – oils and filters have been replaced. Inspection and testing are possible at our warehouse in Vilnius, Lithuania. Key information: Manufacturer: LVD Guodeyxp Eyspfx Aa Sea Model: PPEC-7 135/30 Year of manufacture: 2012.10 Bending force: 135 T (1350 kN) Working length: 3050 mm Technical specifications: Distance between uprights: 2600 mm Stroke: 200 mm Table to frame distance: 500 mm Throat depth: 400 mm Approach speed: 100 mm/s Working speed: 11 mm/s Return speed: 100 mm/s Motor power: 11 kW Oil capacity: 275 L Weight: ~10,000 kg Equipment and configuration: Controller: Cadman Lite (2D graphic programming, Quick Bend, collision control) Table: Equipped with automatic deflection compensation system (Crowning – V-axis) Upper tool clamping: Wila hydraulic system Backgauge: X, X’, R, Z1, Z2 Backgauge fingers: 2 pcs. (3 measuring positions, up to 1000 mm measurement) Laser safety: CE – Lasersafe 2 front supports: PP1115 Machine is sold without bending tools Constructional advantages: • One-piece welded frame • Servo-hydraulic system with Y1–Y2 encoders (0.01 mm accuracy) • Precise and stable bending geometry • Suitable for both serial and precision production If you have any further questions, please do not hesitate to contact us.

Condition: excellent (used), Year of construction: 2021, Bending length: 4100 mm Press force: 240 tons Equipped with a comprehensive set of bending tools Manufacturer: Baykal Model: APHS 41240 Power supply: three-phase Guodpfoymldgsx Aa Sea Year of manufacture: 2021 Serial number: 28635

Condition: good (used), Year of construction: 2013, functionality: fully functional, Available from 15.05.2026 Baling Press Paal Konti 325 G, Year of manufacture 2013 Technical Data: Manufacturer: Paal Model: Konti 325 G Year of manufacture: 2013 Operating hours: 11,723 (as of 10.02.26) Pressing force: 100 t Drive power: 2 x 55 kW Feed opening: 1020 x 1750 mm Bale dimensions: 750 x 1100 mm, length variable Tying: 5-fold automatic Throughput rate at: 35 kg/m³ approx. 13.5 t/h 60 kg/m³ approx. 21.5 t/h 100 kg/m³ approx. 33 t/h Bale weight up to 800 kg Guodpfxjy A Ibne Aa Soa Transport dimensions approx. 12,216 x 2,530 x 2,800 mm (LxWxH) Machine weight approx. 28,000 kg Materials: Paper, cardboard, light waste, plastic waste Please note: All technical data is based on the manufacturer's information. We do not assume liability for the details provided or for any potential errors. This offer is non-binding, subject to prior sale, and can be withdrawn at any time. Inspections are possible by arrangement. Sale against prepayment ex works, without warranty or guarantee.

Condition: excellent (used), Year of construction: 2005, pressing force: 50 t, Hydraulic Press Brake Manufacturer: AMADA Model: HFP 50-20 Year: 2005 Technical Data Make: AMADA Model: HFP 50-20 Year of manufacture: 2005 Working length: 2090 mm Pressing force: 50 t Frame gap: 1,665 mm Stroke: 200 mm Throat depth: 400 mm Installation height: 470 mm Motor power: 6 kW Dimensions: approx. L 2.95 x W 1.60 x H 2.45 m Weight: approx. 4.8 t Equipment • Controlled axes: Y1, Y2, X, R, Z1, Z2 • FIESSLER light curtain at front • Amada upper tool clamping system • CNC control: 3D AMNC Graphics • Rear safety guard (swiveling mesh doors) • Swiveling operator panel – front left • Tooling: Guedpfetzcxpox Aa Soa o Upper tool: straight, R 0.8 mm, H 117 mm, length 2,000 mm o Lower tool: V10/88°, length 2,000 mm All information without guarantee. Additional tooling available in attached PDF. A demonstration under power is possible at any time in our showroom.

Condition: excellent (used), Year of construction: 2019, operating hours: 141 h, functionality: fully functional, Vertical baler HSM V-Press 860 plus B, year of manufacture 2019 Technical data: Manufacturer: HSM Model: V-Press 860 plus B Year of manufacture: 2019 Operating hours: 141 Guedpoyr Dp Esfx Aa Sea Pressing force: 60 t Drive power: 4 kW Feed opening: 1500 x 651 mm Filling height: 1129 mm Bale size: approx. 1500 x 1200 x 780 mm Bale weight: 550 kg Tying: manual Theor. idle cycle time: 25 s Theor. throughput: 32.5 cbm/h Dimensions: 2099 x 1245 x 2985 mm (W x D x H) Weight: 2340 kg Materials: film, paper, cardboard Note: The press is in very good condition and has been inspected and tested by us. A video is available on our website or YouTube channel. Please note: All technical data is based on information provided by the manufacturer. We assume no liability for the accuracy of the information or for any errors. Offers are subject to change, prior sale reserved, and can be withdrawn at any time. Inspections are possible by appointment. Sale is ex location, without warranty or guarantee. Our payment terms are 100% advance payment.

Condition: used, Year of construction: 1990, functionality: fully functional, pressing force: 30 t, throat depth: 210 mm, Hydraulic Press Brake Manufacturer: BEYELER Model M2 30-1550 Year of manufacture: 1990 Technical Details Manufacturer: BEYELER Model: M2 30-1500 Year of manufacture: 1990 Capacity: 30 t Working length: 1500 mm Throat depth: 210 mm Max. pressure: 320 bar Dimensions: approx. L 2.10 x W 1.20 x H 1.90 m Weight: 1.7 t Equipment • Back gauge 500 mm Gujdpfoy Albrox Aa Soa • Tool holder with 13-slot • Upper tool slightly goosenecked, approx. 80–85° • Lower tool with V8 • Euro II control • Rear safety fence All information provided without guarantee. A demonstration can be arranged at any time in our showroom.

Condition: excellent (used), Working width ca. 2.600 mm Working height ca. 1.450 mm Number of cylinders 6 St. Gedpfx Ajyrt Abja Sjua down holder 3 St. Stable hydraulic hole press, hole plate press, or gluing press for gluing or fixing workpieces such as frames, panels, windows, or doors.

Condition: used, Rotor width: approx. 300 mm Rotor diameter: approx. 300 mm Stator knives: 6 Rotor knives: 9 Guodpfxey At U Ts Aa Soa

Condition: used, The Herbold PU 500 fine grinder is suitable for fine grinding of plastics and soft to medium-hard materials. Gsdpjy At Hijfx Aa Seua Drive power 55 kw Grinding disk diameter 500 mm Throughput capacity approx. 200-800 kg/h depending on material and fineness

Condition: used, Pressing screw REG-MAC for drying films and fibers, and for compacting foam (e.g. polystyrene, EPS) Drive motor 55 kw Gusdpfxjy At Hcs Aa Ssa

Condition: good (used), Year of construction: 2019, functionality: fully functional, Baler Dixi 80 SLD, with lifting/tipping device, semi-automatic, year of manufacture 2019 Gujdpfx Aey Avlnea Sea Manufacturer: Dixi Model: Dixi 80 SLD Year of manufacture: 2019 Drive power: 11 kW, 400 V / 32 A Feed opening: 1,040 x 1,110 mm (W x L) Pressing force: 80 t Press cycle: approx. 35 s Capacity: approx. 1,000 kg/h Bale size: 1,120 x 1,120 x 1,200 mm (W x H x L) Bale weight: approx. 500–600 kg Binding: 4-fold, manual Machine dimensions: approx. 4,320 x 1,830 x 2,620 mm (L x W x H) Machine weight: approx. 8,000 kg Materials: Paper, cardboard, film The press is in good condition. It has been checked and tested by us. A video is available on our website or YouTube channel. Please note: All technical data are based on manufacturer information. We do not accept any liability for the stated data or possible errors. This offer is subject to change without notice, prior sale, and revocation at any time. Inspection is possible by appointment. The sale is ex works, against advance payment, without warranty or guarantee.

Condition: good (used), Year of construction: 2019, functionality: fully functional, Baler Dixi 80 SLD, with lifting/tipping device, semi-automatic, year of manufacture 2019 Manufacturer: Dixi Model: Dixi 80 SLD Year of manufacture: 2019 Drive power: 11 kW, 400 V / 32 A Feed opening: 1,040 x 1,110 mm (W x L) Pressing force: 80 t Press cycle: approx. 35 s Capacity: approx. 1,000 kg/h Bale size: 1,120 x 1,120 x 1,200 mm (W x H x L) Bale weight: approx. 500–600 kg Binding: 4-fold, manual Machine dimensions: approx. 4,320 x 1,830 x 2,620 mm (L x W x H) Machine weight: approx. 8,000 kg Guodpfx Aaey Avhce Sja Materials: Paper, cardboard, film The press is in good condition. It has been checked and tested by us. A video is available on our website or YouTube channel. Please note: All technical data are based on manufacturer information. We do not accept any liability for the stated data or possible errors. This offer is subject to change without notice, prior sale, and revocation at any time. Inspection is possible by appointment. The sale is ex works, against advance payment, without warranty or guarantee.

Condition: used, Year of construction: 1962, Hydraulic press 160 t Guedpfxeyxnb Hs Aa Sja

Condition: used, Hydraulic press by UVA Gjdpfjyxnbgex Aa Ssua

Condition: used, Eccentric press by PELS Gusdpjyxna Njfx Aa Sea

Condition: used, Hydraulic press by UVA Guedpfeyxnavsx Aa Sja

Condition: used, Double disc press 520 t Gsdpfx Aeyxm U Sea Sjua

Condition: used, Year of construction: 2014, functionality: fully functional, input voltage: 380 V, input frequency: 50 Hz, type of input current: three-phase, Equipment: documentation/manual, Heavy-duty hydraulic semi-auto edge glue and laminating clamp carrier machine with 6 working sections for sale. It has been upgraded with 2 additional cylinders for panel flattening, 6 in total - 3 in each row. Machine has signs of use but it is fully functional and can be tested on site. Gsdpfx Aaey Antke Soua Model: KCCM0/H-6 10 38-125 Year: 2014 Voltage: 3P 380V Max working length - 3100mm Max working width - 950mm Max working height - 90mm

Condition: new, Year of construction: 2026, functionality: fully functional, total length: 3,280 mm, total height: 2,700 mm, total width: 2,000 mm, overall weight: 11,000 kg, input voltage: 400 V, type of input current: three-phase, warranty duration: 12 months, PRESS BRAKE 200T × 3200 mm The press brake is used for forming sheet metal. During the slider cycle, the sheet metal can be bent to match the required geometric cross-section. The machine can be used in many industries – electromechanical industry, light industry, agricultural machinery manufacturing, shipbuilding, automotive industry, aerospace industry, etc. Machine Functions Back gauge position control Intelligent position control Recall functions Automatic reference point search Backup and restore parameters with a single identifier Fast position indexing Memory for 40 machining programs, each with 25 steps Power failure protection Technical Data Pressing force: 200 T Maximum workpiece length: 3200 mm Distance between columns: 2530 mm Throat depth: 320 mm Ram stroke: 200 mm Godpfxjyttbmo Aa Seua Maximum opening height: 455 mm Motor power: 11 kW Weight: 11000 kg Machine dimensions (L × W × H): 3280 × 2000 × 2700 mm Equipment Controller MTP-3212 Ball guides for back gauge Two back gauge fingers Two front supports Cylinder covers Optical light curtains (front) Safety gates (rear) Foot pedal AMADA-type punch holder Four-side lower die prism Back gauge driven by electric motor Segmented punch with possibility to remove a damaged segment Delivery Conditions The machine is brand new 12-month warranty Warranty service Post-warranty service CE declaration of conformity Operation manual in English Delivery to the customer is possible. Delivery cost according to an individual quotation from the transport company. If you are interested in other machines, we encourage you to visit our website.

Condition: new, Year of construction: 2026, functionality: fully functional, warranty duration: 12 months, The press brake is designed for bending sheet metal. During the ram stroke, the sheet can be bent and formed to the required geometric profile. The machine can be used in many industries, including electromechanical engineering, light industry, agricultural machinery production, shipbuilding, automotive industry, aerospace industry, and many others. Technical data Maximum sheet thickness: up to 6 mm Press force: 125 t Maximum bending length: 3200 mm Distance between columns: 2700 mm Throat depth: 320 mm Ram stroke: 120 mm Maximum opening height: 390 mm Back gauge travel: 600 mm Motor power: 7.5 kW Weight: 7500 kg Dimensions (L × W × H): 3870 × 1550 × 2400 mm Equipment Tools Front supports: 2 pcs Back gauge adjustment (X axis): servo drive Beam adjustment (Y axis): servo drive Back gauge finger height adjustment (R axis): manual Punch clamping system: AMADA-type quick clamping Controller: MTP-3212 The CNC controller features an intuitive and user-friendly menu. The software automatically calculates the bending angle. Possibility to store up to 40 punch types. Large color touchscreen display readable from any angle. High-quality components High-quality German Rexroth hydraulic valves Electrical components from Schneider Electric Safety components from Omron and Schneider Steel hydraulic connections The use of steel hydraulic connections significantly reduces the risk of leaks in the future. Ergonomics Thanks to the mobile controller and the control panel mounted on a movable arm, the operator can work flexibly across the entire working area of the machine. Additional LED lighting ensures excellent visibility of the workpiece in all conditions. Discover a new level of comfort and efficiency with our innovative solutions. Safety Our press brakes are designed with maximum operator safety in mind. They are equipped with: clearly visible markings side guards rear safety gate easily accessible emergency switches light curtain preventing accidental access of hands between the punch and die during operation The machine is supplied with a Polish-language user manual, ensuring full understanding of safe operation. The machine also has a CE Declaration of Conformity, confirming compliance with all European safety and quality standards. Specialist assistance We maintain continuous contact with our customers. For every machine we provide technical support from our service engineers and specialists. Our specialists can: assist in determining bending steps for complex parts provide professional advice on selecting suitable materials and tools assist in selecting optimal working parameters for different materials Gsdpfjytp N Hjx Aa Sjua We are here to support you at every stage of the process. Technical consulting Our specialists are available before purchase to help you select the right machine and accessories. Delivery to the customer is possible. Delivery cost according to the individual quotation of the transport company. If you are interested in other machines, please visit our website.