Used Flat Die Thread Rolling Machine for sale (72,205)

Condition: used, CNC Press Brake AMADA Type HFBO 50 x 2000 Serial No. HFBO 50 20 S60906 Year of manufacture: 1996 Press brake with 8 axes - CNC control Operator II Pressing force: 50 tons Working length: 2090 mm Stroke: 200 mm Frame depth: 420 mm Distance between side frames: 1660 mm Max. tool installation height: 460 mm Table width: 60 mm Table height above floor: 910 mm Motor power: 4.5 kW Mains connection: 400 Volt, 50 Hz, 20 Amp. - 8-axis CNC control Operator II (Y1-Y2 / X1-X2 / Z1-Z2 / R1-R2) - 2 freely programmable backgauge fingers, movable laterally and in height (Z1+Z2+R1+R2) - Press beam with servo valves and measuring system Y1 and Y2 - Operation via electric foot switch and/or two-hand control panel - Mechanical lever-style tool clamping for the upper tool (5 AMADA Expert, 5 UKB 50.667 H=120 mm) - Tool holder for lower tool, 60 mm wide - 11-piece upper tool set, 30°, total length 1675 mm - consisting of: 1x 835 / 1x 300 / 1x 165 / 1x 50 / 1x 45 / 1x 35 / 1x 20 / 1x 15 / 1x 10 / 2x 100 mm (end pieces) in length - 2-piece lower tool, 88° - V8, total length 1250 mm - consisting of: 1x 835 / 1x 415 mm in length - Indicated operating hours: 30,537 h - Operating manual, electrical diagram, spare parts book included Dodpfow Iq Ugjx Afpoun Weight: 4,700 kg Good condition

Condition: new, Year of construction: 2025, Bending machine ZB 70/2 M - with foot pedal - with standard roller set - two driven shafts - mecanical adjusting of the center roller - working position horizontal and vertical - shafts are supported by conical bearings - slide bars on the slide -support are exchangeable - shaft diameter: 40 mm - roller diameter: - shaft rpm: 8,5 U/min - voltage: 400V 50Hz 3Ph - drivingmotor: 1,1 kW - adjusting way: 120 mm - weight: 400 kg Dujdpfet Hwfnjx Afpsn - dimensions: 900x600x1100 mm

Condition: used, functionality: fully functional, Year of construction: 1988, control type: PLC-controlled, 3-roll plate rolling machine Manufacturer: FERRO Model: CIT - 1 Year of manufacture: 1988 Working range: 2000 x 6 mm Hydraulic swing-out bearing Cone bending device Djdpfx Afeyhdvqjpeun

Condition: good (used), Year of construction: 2001, Technical Data: Duedpfx Afjyhbi Ujpon Working width: 2050 mm Max. bending capacity for mild steel S235 (St40): 16.0 mm Max. pre-bending for mild steel S235 (St40): 13.0 mm Top roll diameter: 240 mm Diameter of side lower rolls: 220 mm Diameter of middle lower roll: 240 mm Cone bending device Hardened rolls Swivelling control panel Hydraulic drop-end bearing CE marking Motor power: 11 kW Dimensions (L x W x H): approx. 4400 x 1800 x 1500 mm Weight: approx. 6 tons The seller accepts no liability for typographical or data transmission errors. The machine is in a condition – visually, technically, and regarding wear – appropriate for its age; used machines are sold without any warranty.

Condition: good (used), Year of construction: 2005, For sale BARBERAN flat gluing line, model CALH-4-1600, EN-H-4-1600 Duedpfxev Uxvue Afpsn The price given in the advertisement is a net price to which VAT should be added

Condition: used, functionality: fully functional, actuation type: hydraulic, roller (top) diameter: 420 mm, sheet thickness (max.): 25 mm, Hydraulic cylinder Brand: Casanova Bending length: 3,100 mm Maximum bending thickness: 25 mm Top roller diameter: 420 mm The side rollers are raised parallel, without inclination. New control and command panel, installed and modified in 2003. Duodpfsydk D Hex Afpon Equipped with hydraulic flag and hydraulic side table. Pit dimensions: - 200x6800 mm - 555 mm depth

Condition: excellent (used), Year of construction: 2009, Technical data: Working width: 2600 mm Bending capacity: 16.0 mm Pre-bending: 12.0 mm Dujdpfx Asyg Eulefpon NC control Upper roller diameter: 330 mm Middle roller diameter: 290 mm Side roller diameter: 270 mm Conical bending device via inclined positioning of the side rollers Mobile control panel with digital display Motor power: 11 kW CE mark Dimensions (length x width x height): approx. 5100 x 2100 x 1800 mm Weight: approx. 12 tons The seller is not liable for typographical or data transmission errors. The machine's condition, both visually and technically, as well as wear, is in accordance with its age; used machines are sold without any warranty.

Year of construction: 1960, condition: used, Surface grinder with magnet 250 x 135 Duodpsiuz Tgsfx Afpsn 400 Volt power 1,8 kw

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, grinding length: 700 mm, grinding width: 450 mm, NEW ARRIVAL 1 used hydraulic surface grinding machine GEIBEL & HOTZ FS 6040 The grinding area of the G & H FS 6040 is 600 x 450 mm - Year of manufacture: 2000 - Machine with automatic program sequence - roughing - finishing - spark-out - return to starting position. The machine is equipped with 2-axis digital readout, stainless steel coolant system, various flanges, fine pole pitch magnetic chuck, wheel dresser. Compatible flanges for Jung HF/JF 520. Machine includes operating manual and electrical schematic - fully function tested. Very lightly used machine from prototype/testing department (original paint). Pricing: ex stock, unpacked, uninsured, domestic sales plus VAT. Delivery time: immediately - subject to prior sale. Payment: as customary in the trade - before collection - immediate upon receipt of invoice. Best regards, Duodpfevz A Dcjx Afpon Induba GmbH Mathias Becker

Condition: new, Year of construction: 2025, operating hours: 10 h, functionality: fully functional, machine/vehicle number: MT1212_38, warranty duration: 36 months, Multitapper 1212 automatic threading machine CoastOne - Made in Finland New machine Working area: 1250x1250mm Dedpfx Afsxd U R Njpjun Thread sizes: M2-M10 Number of spindles: 3 (optional 4) 2x thread cutting; 1x countersink drilling station Micro lubrication for every spindle / tool station Control: TC15 touchscreen Numerical entry, import of punches - NC files

Condition: excellent (used), Year of construction: 2025, operating hours: 100 h, functionality: fully functional, machine/vehicle number: MT1212_2025_28, working range: 1,250 mm, overall weight: 1,400 kg, compressed air connection: 6 bar, total height: 1,610 mm, total length: 2,550 mm, type of input current: AC, warranty duration: 36 months, workpiece weight (max.): 80 kg, table width: 1,250 mm, air pressure: 6 bar, input current: 16 A, table length: 1,250 mm, space requirement height: 1,610 mm, space requirement length: 2,550 mm, space requirement width: 1,770 mm, Equipment: documentation/manual, rotational speed infinitely variable, Multitapper 1212 Automatic Threading Machine Duodpfxoxx R H As Afpen CoastOne - Made in Finland Demonstration Machine Machining area: 1250 x 1250 mm Thread sizes: M2-M10 Number of spindles: 3 (optionally 4) 2 thread cutting and forming stations; 1 countersinking and drilling station Micro-lubrication for each spindle/tool station Control: TC15 touchscreen Numeric input, import of punch and NC files Warranty: 36 months after installation Immediately available; subject to prior sale Viewing under power is possible at any time by appointment

Condition: used, machine/vehicle number: 008381, X axis working area: 4250 mm Y axis working area: 2280 mm Working Table: Flat table Main Electrospindle power: 7.5 KW Number of controlled axes: 5 axes Djdpfx Afex Swc Hjpeun Total number of drilling spindles: 11 Total number of tool changer positions: 24

Condition: used, Year of construction: 1971, material width 180 mm coil weight 0,5 t material thickness 2,0 - 6,0 mm coil external diameter 400 - 1250 mm no. of straightening rolls 5 Dodpfxevuk H Sj Afpjun straightening roll diameter 70 mm number of draw-in rolls 2 0 roll diameter 110 mm speed 20 m/min power requirement 4,0 kW Weight 2,8 t dimensions (WxDxH) 1,4 x 2,45 x 1,85 m SPECIAL DEAL with infinitely variable drive, pneumatic snubber roll, pneumatic intermittent lifting, coil loop control material thickness 2,0 mm at material width 180 mm Material thickness 6,0 mm at material width 40 mm as is where is, WITHOUT additional work

Condition: good (used), Year of construction: 1995, Table work area : 850×400 mm Table travel distance : 950×440 mm Distance table top to wheel bottom : 47.5 – 547.5 mm Standard chuck size : 800×400×105 mm Max workpiece weight : 700 kg (230 kg sur plateau magnétique) T-Slots (W×No.) : 17×3 Longitudinal feedrate : 3 – 25 mm/min Crosswise feedrate : 1 – 1000 mm/min Djdpfx Afowugliepoun Vertical feedrate : 1 – 1000 mm/min Min input increment (vertical) : 0.0002 mm Grinding wheel O.D.×W×I.D. : 355×38×127 mm Grinding wheel speed : 1500/1800 r.p.m. Wheel spindle drive motor : 3.7 / 4 kW Vertical feed motor : 0.3 kW Cross feed motor : 0.3 kW Hydraulic pump motor : 2.2 / 4 kW Air-cooled oil cooler motor : 90 / 105 W Floor space (L×W×H) : 3310×2228×2713 mm Machine weight : 4000 kg Specifications are subject to change at any time without prior notice. No liability shall be assumed for errors or omissions.

Condition: as good as new (ex-display), Year of construction: 2024, High-quality spindle with precision tapered roller bearings Hardened and ground table guideways Turcite-B coated counter guides for high wear resistance and low friction Integrated grinding wheel removal device Machine base made of sturdy, torsion-resistant cast iron for maximum rigidity and stability Dodpfx Afow Eay Ijpeun Backlash-free V-flat guide in the Z-axis and flat guides in the X- and Y-axis Trapezoidal threaded spindle in the Y-axis Manual central lubrication All flat guides are finely scraped, guaranteeing high precision of all manual movements LED lamp Safety electrics with 24 V DC voltage Sanding accuracy: 0.005 mm Grit 46 corundum grinding wheel for all common steels included as standard Two-channel safety electrics EMC filter class Significant energy savings thanks to IE3 motor Coolant system with external coolant tank Dimensions and weights Length approx. 1970 mm Width/depth approx. 1300 mm Height approx. 1700 mm Weight approx. 850 kg Electrical data Power drive motor 1.5 kW Supply voltage 400 V Mains frequency 50 Hz Surface grinding table Clamping surface length 200 mm Clamping surface width 500 mm Grinding wheel(s) Outer diameter 200 mm Width 20 mm Bore 31.75 mm Peripheral speed 33 m/s Spindle Speed 2850 min¯¹ Concentricity 0.005 mm X-axis Feed speed Manual

Condition: as good as new (ex-display), Year of construction: 2025, GT 30 - The OPTIMUM premium NC sanding machine with Siemens touch screen. - Electromagnetic clamping plate for fixing the workpiece with automatic demagnetization function - High-quality spindle with precision tapered roller bearings - Hardened and ground table guideways - Turcite-B coated counter guides for high wear resistance and low friction - Grinding spindle with high-quality precision bearings - Grinding wheel can be resharpened directly on the machine using a sharpening device - Digital position indicator - Machine base made of sturdy torsion-resistant cast iron for maximum rigidity and stability - Guideways for longitudinal, transverse and vertical movements are backlash-free and self-centring as V and flat tracks - Precision recirculating ball screws - Guideways and transport spindle with central lubrication - All flat guides are finely scraped and thus guarantee maximum precision of all manual movements - Safety electrics with 24 V DC voltage - Large decoupled handwheels in all three axes - Hydraulic lines according to DIN EN 853 - Sanding accuracy: 0.005 mm - Grain 46 corundum grinding wheel for all common steels - Swivel-mounted control panel makes work considerably easier - Separate hydraulic unit with heat exchanger, avoids vibrations and thermal stress - Two-channel safety electronics - Grinding table splash guard - EMC filter class - With IE3 motor - consumes considerably less energy, resulting in significant cost savings Dimensions and weights Length approx. 3200 mm Width/depth approx. 2200 mm Height approx. 2100 mm Weight approx. 3000 kg Electrical data Total connected load 6.5 kW Supply voltage 400 V Mains frequency 50 Hz Surface grinding table Clamping surface length 300 mm Clamping surface width 600 mm Grinding wheel(s) Outer diameter 350 mm Width 40 mm Bore 127 mm Peripheral speed 27 m/s Spindle Speed 1450 min¯¹ Concentricity 0.005 mm X-axis Feed speed 5 - 25 m/min Scope of delivery Unit of measure: piece Packaging unit: 1 Digital position indicator Coolant device Balancing mandrel Grinding wheel grit 46 Diamond pin Operating tool Manual oil pump LED lamp Electromagnetic clamping plate Demagnetizing function Equipment Electromagnet clamping plate Splash guard table enclosure Automatic demagnetizing device Parallel dressing device ✔ Dsdpfx Afow Eazfspoun Coolant device 125 W Work light LED lamp Alignment feet ✔

Condition: as good as new (ex-display), Year of construction: 2025, GT25 - The OPTIMUM premium NC sanding machine with Siemens touch screen. - Electromagnetic clamping plate for fixing the workpiece with automatic demagnetization function - High-quality spindle with precision tapered roller bearings - Hardened and ground table guideways - Turcite-B coated counter guides for high wear resistance and low friction - Grinding spindle with high-quality precision bearings - Grinding wheel can be resharpened directly on the machine using a sharpening device - Digital position indicator - Machine base made of sturdy torsion-resistant cast iron for maximum rigidity and stability - Guideways for longitudinal, transverse and vertical movements are backlash-free and self-centring as V and flat tracks Djdpfsw Eayhjx Afpoun - Precision recirculating ball screws - Guideways and transport spindle with central lubrication - All flat guides are finely scraped and thus guarantee maximum precision of all manual movements - Safety electrics with 24 V DC voltage - Large decoupled handwheels in all three axes - Hydraulic lines according to DIN EN 853 - Sanding accuracy: 0.005 mm - Grain 46 corundum grinding wheel for all common steels - Swivel-mounted control panel makes work considerably easier - Separate hydraulic unit with heat exchanger, avoids vibrations and thermal stress - Two-channel safety electronics - Grinding table splash guard - EMC filter class - With IE3 motor - consumes considerably less energy, resulting in significant cost savings Technical data: Dimensions and weights Length approx. 2300 mm Width/depth approx. 1600 mm Height approx. 1675 mm Weight approx. 1700 kg Electrical data Total connected load 3 kW Supply voltage 400 V Phase(s) 3 Ph Oc8fv Current type AC Mains frequency 50 Hz Surface grinding table Length 254 mm width 508 mm Grinding wheel(s) Outer diameter 200 mm width 20 mm Bore 31.75 mm Peripheral speed 33 m/s Spindle Speed 2850 min¯¹ Concentricity 0.005 mm X-axis Feed speed 5 - 25 m/min PU 1 Scope of delivery Unit of measure: piece Packaging unit: 1 Digital position indicator Coolant device Balancing mandrel Grinding wheel grit 46 Diamond pin Operating tool Manual oil pump LED lamp Electromagnetic clamping plate Demagnetizing function Equipment Electromagnet clamping plate Splash guard table enclosure Automatic demagnetizing device Parallel dressing device Coolant device 40 W Work light LED lamp Alignment feet

Condition: good (used), Heidelberg Cylinder S 54×72 Automatic Die-Cutting Machine This machine is in production and ready to go. Format: 540x720mm The machine is ready for die-cutting. Fully automatic, central lubrication. Dodpfx Afex N Dymepoun Includes mounting frame, cylinder plate, carriages, and a set of fillers and locks.

Condition: excellent (used), Year of construction: 2018, sheet width 1040 mm plate thickness 3.00 mm ST diameter of upper rolls 100 mm side roll diameter 100 mm diameter of lower rolls 100 mm speed 6.0 m/min semi-automatic operated FM 2.1R voltage 400 V total power requirement 2.2 kW weight of the machine ca. 740 kg range L-W-H 2250 x 825 x 1910 mm Very well-kept condition (almost as good as new)! current new price including accessories ~ 28.000 Euro special price on request Start and finish rounding is very easy with this machine thanks to the special concept, the extensive accessories and the robust construction. Machine for Duedpfx Ajx U Emfefpjn for one-off production and series production = extremely universal and economical. Equipment: - Robust electro-mechanical three-roll round bending machine - Driven by spur gear brake motor Primary reduction gear - Top roller Side roller electrically driven - Asymmetrical roll arrangement - Manual bottom roll adjustment * with analog position indicator - FASTI control unit "FM 2.1R" * Setting max./min. max./min. travel value side roller - Swing-out top roller, with hinged bearing - Conical bending device - 1x freely movable double foot switch * Right / left rotation of the rollers - Electrical safety device (cable) - original operating instructions

Condition: good (used), Round bending machine with hand crank operation, max. working width 2 m, old, stable and heavy cast iron machine. Djdpfeyf Uahox Afpoun

Condition: used, Year of construction: 1988, working width 2000 mm sheet width - max. 3 mm Dujdox U A Tpspfx Afpsn diameter 120 mm weight 700 kg

Condition: used, Year of construction: 1970, plate thickness max. 1,5 mm sheet width max. 1.020 mm Year ca. 1970 manual ja ja ja +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Dusdpfsx U Daksx Afpsn Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: used, Year of construction: 1966, sheet width 2010 mm Dujdpfx Afox Uz Acjpjn plate thickness 5 mm weight of the machine ca. 3 t Foldable bust

Condition: used, Year of construction: 1966, sheet width 2010 mm plate thickness 5 mm Duedpfsx Uz Aiex Afpon weight of the machine ca. 3 t Foldable bust

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, grinding length: 400 mm, total height: 525 mm, feed length X-axis: 400 mm, feed length Y-axis: 525 mm, rotational speed (max.): 1,400 rpm, We offer for sale a precision surface grinder from the renowned GEIBEL & HOTZ brand, model FS 640 SD. Technical parameters: • Table working surface: 600 x 400 mm • Maximum table load: 600 kg • Year of manufacture 2015 • Grinding wheel: Ø 300 mm x 50 mm, bore 76.2 mm • Spindle speed: up to 1400 rpm • Feed speed in the X axis: 5 – 35,000 mm/min • Feed ranges: o Z axis (transverse): up to 400 mm o Y axis (vertical): 140 – 525 mm Equipment and additional features: • Electromechanical table drive • Comfort Control Panel SD control panel Dodpfx Ajwbixxjfpeun • Automatic lubrication system • Stable and low-vibration cast construction