Used Floating Dredgers for sale (317)

Condition: excellent (used), Year of construction: 2020, operating hours: 1,500 h, functionality: fully functional, The furnace is designed for the tempering of colored, ornamental, and screen-printed glass, as well as clear float glass with an emissivity of over 0.04. According to EN 12150:1 – 2000, for 4 mm thick glass, a success rate of at least 95% is guaranteed, and for glass thicker than 5 mm, a success rate of over 97% is guaranteed. Structurally, the furnace consists of five distinct zones: loading, bending module, heating, cooling, and unloading. When tempering flat glass, the workflow is from left to right: loading – passing through the bending module (which functions as a flat conveyor) – heating – cooling – unloading. When bending glass, the following workflow applies: loading – passing through the bending module – heating – back into the bending module (where the glass is moved transversely along the length of the furnace from left to right while the upper and lower parts of the module gradually conform to the curve to be created) – unloading (in the case of curved glass, unloading also takes place at the entrance). The inlet conveyor is equipped with a roller table with pneumatic lifting/lowering and auxiliary rollers for loading and unloading from three sides. The structure of the heating section is a box-type with a double layer coated with thermal insulation material (perfect insulation performance, low energy consumption, and natural cooling of 15 ℃ / h). Inside the heating zone, there is a conveyor system with ceramic rollers resistant to high temperatures, manufactured by Vesuvius (diameter 48 * Ø85mm, spacing 120mm). The heating elements (resistors) are installed on the upper and lower sides of this zone. The resistors are arranged in a matrix with temperature sensors, automatic heating and pause functions to save energy. The upper section has 25 heating elements, and the lower section also has 25. Each resistor has an independent control loop. Bedpfx Agsz Ru Iyskedi Outlet conveyor The outlet conveyor is equipped with a roller table with pneumatic lifting/lowering and auxiliary rollers for loading and unloading from three sides.

Condition: excellent (used), CATALOGUE NUMBER 8017 TECHNICAL DATA - track width 335mm - arbor width 400mm - max. blade diameter 350mm - blade arbor hole diameter 80mm - max. cutting height 120mm - table width with clearance 700mm - table length 1720mm from above: - guides/pawls - roller, sliding pressure, metal - guides/pawls - roller, sliding pressure, metal - arbor with saw blades - sliding pressure arbor, metal, 2 pcs from below: - pneumatic guide rail - sliding metal roller - guides/pawls - track - sliding metal roller, outfeed - electric body lifting 0.35kW - manual arbor lifting with saw blades - central lubrication - stepless feed rate adjustment 1.5kW - main motor 30kW - laser 3 pcs - floating blade - additional sleeve for multi-blade saw - saw blade cleaning - extraction nozzle diameter 260mm - overall dimensions L/W/H 2300x2000x2150mm - weight approx. 3000kg ADVANTAGES – German production – floating blade – laser 3 pcs – saw blade cleaning – additional sleeve for multi-blade saw – pneumatically adjustable guide rail – stepless speed adjustment – used multi-blade saw, very good condition Net price: 136900 PLN Net price: 31837 EUR depending on the exchange rate of 4.30 EUR Bdjdpjzrmqwjfx Agkoi (Prices may vary with larger fluctuations)

Condition: excellent (used), Year of construction: 2021, Sale on behalf of customer. SCM Gabbiani P80 Panel Saw – Year 2021 – 4300 x 4300 mm For sale is a state-of-the-art SCM Gabbiani P80 panel saw, manufactured in 2021 and in excellent condition. The machine was used in an active carpentry workshop and impresses with its precision, speed, and high reliability in daily operations. Technical Specifications: Cutting length: 4300 mm Cutting width: 4300 mm (large version) Cutting height / blade protrusion: 80 mm Main saw blade diameter: Ø 340 – 370 mm Scoring saw blade diameter: Ø 200 mm Main saw blade speed: approx. 4,650 rpm Scoring blade speed: approx. 5,850 rpm Drive & Power: Main motor: approx. 7.5 – 15 kW (depending on configuration) Scoring unit: approx. 1.3 – 1.5 kW Total connected load: approx. 12 – 15 kW Voltage: 400 V / 50 Hz Speeds: Saw carriage: 6 – 60 m/min (stepless) Pusher speed: up to 60 m/min Pneumatics & Extraction: Compressed air requirement: approx. 300 NL/min / 7 bar Extraction capacity: approx. 2,200 – 2,400 m³/h Extraction ports: 4 x 120 mm Features & Equipment: Air flotation tables for easy handling of large panels Floating clamps for precise cutting Scoring unit for chip-free cuts PC/PLC control (Maestro system possible) Robust industrial design for high workload High repeatability and cutting quality Bsdpfjylp S Esx Agkjdi Material suitability: Suitable for: Chipboard MDF / HDF Multiplex / plywood Coated panel materials The machine is fully operational and ready for use. Viewing possible anytime by appointment. Location: Germany If you are interested, please get in touch – further photos, videos, or detailed information are available upon request. Dismantling and delivery can be arranged at additional cost.

Condition: used, Year of construction: 2015, SANDYA 900 - WIDE-BELT CALIBRATING AND FINE-GRINDING MACHINE S900 RRT 135 KEY FEATURES 2,620 MM LONG GRINDING BELTS FOR OPTIMAL SURFACE QUALITY AND PRODUCTIVITY PHOTO CELLS WITH SYSTEM WITH BACKGROUND SUPPRESSION: THE CORRECT CENTERING OF THE GRINDING BELT IS ALWAYS GUARANTEED FLOATING PRESSURE ROLLERS: ACCURATE AND CORRECT SUPPORT OF THE WORKPIECES UNDER ALL WORKING CONDITIONS TECHNICAL DATA Working width mm 1,350 Min./max. working height mm 4-170 Grinding belt width mm 1,370 Grinding belt length mm 2,620 Motor power 1st unit kW (HP) 11 (15) Motor power 2nd/3rd unit kW (HP) 11 (15) Gear motor kW (HP) 0.6/1.3 (1.8/1.7) Feed speed m/min 4.5/9 GENERAL FEATURES: Machine frame and work table* Steel structure with electrical control cabinet on the front of the machine * Insertion of the grinding belts from the left side of the machine * motorized table height adjustment * Main motors integrated into the machine frame Electrical equipment* Electromechanical control panel on the left front side of the machine * automatic star-delta starter for the main motor * motor protection switches for the motors * motors in insulation class IP 54 Safety and protective devices* automatic brake for immediate stopping of the units * emergency stop switch at the workpiece infeed * emergency stop switch at the workpiece infeed and outfeed * lockable main switch * automatic emergency shutdown of the machine in case of: - grinding belt breakage - grinding belt not tensioned - protection against lateral deflection of the grinding belt - lack of compressed air - overload of the main motors Note: the standard version with 400 volts 50 Hz requires a three-phase power supply + neutral conductor + earth conductor. If the 400-volt power supply is without a neutral conductor, a single-phase transformer must be ordered in addition from the price list. The same transformer must also be ordered for a machine with a voltage higher than 400 volts, regardless of whether a neutral conductor is available or not. Machine version with 220 or 230 volts (50 or 60 Hz) is available at an additional cost (see price list). BASIC MACHINE STANDARD EQUIPMENT - R175/85 rubber-coated calibrating roller, diameter 175 mm, 85 Shore - 1st position - R220/65 rubber-coated calibrating and grinding roller, diameter 220 mm, 65 Shore - 2nd position - Hard grinding shoe with manual adjustment of the working height - Replaceable graphite cloth - Motor power 1st unit 11 kW (15 HP) - Motor power 2nd and 3rd unit 11 kW (15 HP) - Electronic ammeter for the main motor to display the current consumption - Electronic display of the working height - Electronically controlled grinding belt oscillation - Rubber pressure rollers - Recoil protection at the infeed before the first unit - Rubber feed belt 60 SH - Roller table with two rollers at the infeed and outfeed of the work table - Belt feed with two speeds 4.5 / 9 m/min with gear motor - Automatic belt centering European safety regulations (CE marking) 1 piece SANDYA 900 RRT 135 - Calibrating and fine-grinding machine 1 piece First and second "R" unit with roller and third "T" unit with grinding shoe Voltage 400 EU 1 piece Frequency 50 Hz 1 piece "C plus" version for RRT 1 piece with: - pneumatic switching on and off of the roller – 1st unit "R" - pneumatic switching on and off of the roller – 2nd unit "R" - "MESAR 46" electronic oscillating grinding shoe - electronic adjustment of the working height - Selection of belt running direction 2nd grinding belt 1 Bdodpfxe Aflwyo Agkji

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, overall weight: 980 kg, measuring range X-axis: 700 mm, measuring range Y-axis: 700 mm, measuring range Z-axis: 500 mm, Coordinate measuring machine Coord3 ARES NT 7.7.5 Year of manufacture: 2014 Motorized indexable head Renishaw PH10M hand controller: Renishaw MCU LITE-2 MPEe accuracy: 2.5 µm + L/300 Repetition accuracy: from 2.3 µm Measuring range: 700 x 700 x 500 (mm) Granite bed size: 1330x963.5x170mm Bdedju E U Hbepfx Agksi Software: TouchDMIS 5.2 + dongle The Z-axis support column is made of silicon carbide, which increases rigidity. DC servo motors, air bearings on all axes, free-floating linear scales with 0.1 µm resolution.

Condition: used, mileage: 2,75,932 km, power: 120 kW (163.15 HP), first registration: 04/2010, fuel type: diesel, overall weight: 5,000 kg, color: white, gearing type: automatic, emission class: euro5, number of seats: 2, total length: 6,450 mm, total width: 2,080 mm, total height: 2,900 mm, Year of construction: 2010, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, Special equipment: 1 DIN slot in the front below the headliner, airbag on the passenger side, hill start assist, exhaust pipe in front of the rear axle on the left, exterior mirrors without integrated turn signal, exterior temperature display, battery 100 Ah, additional battery (reinforced), battery disconnect switch 1-pole, turn signals in the front, roof console with reading light for driver/passenger side, door entry lights, additional main key, folding cover for storage compartment, programmable special module, spare wheel Super-Single tire (235/65 R16), spare wheel holder under the end of the frame including jack, interior rearview mirror, rear wall with window, mud flaps in the front, seats in the cab: passenger seat comfort, seats in the cab: driver seat comfort, reinforced rear stabilizer bar, reinforced front stabilizer bar, fuel gauge for auxiliary heater, separation relay for additional battery, rear wall paneling, thermal insulation for the driver's cab, heat-reflective glazing (windshield with band filter at the top), auxiliary heater (air) electric Additional equipment: Adaptive brake light, airbag on the driver side, indicator for windshield washer fluid level, exterior mirrors electrically adjustable and heated, both sides, brake assistant, braking system with ABS+ASR, roof lining in the cab, glove compartment lockable, body/superstructure: standard platform body, fuel tank: main tank 75 liters, headlight range adjustment, truck approval, engine 2.1 L - 120 kW CDI CAT, wheelbase 3665 mm, smoker's package, low emissions according to emission standard Euro 5, safety belt system with warning system (driver side), seat cover/upholstery: fabric Lima, service interval indicator Assyst, permissible total weight 5.00 t, dual tires on 2nd axle/rear axle incl. stretcher and transfer chair from Stollenwerk, 1st owner * Rear axle with air suspension * Ambulance and rescue vehicle box body * Superstructure by Fahrtec Systeme * Adjustable floating table * Stretcher by Stollenwerk * Transfer chair by Stollenwerk * Central locking for the patient compartment * Air conditioning KONVEKTA * 1 attendant seat * Refrigerator * Warming cabinet * Sink * Medical cabinets * Oxygen and suction system pre-installed * 12 + 230 Volt sockets * Roof hatch * External storage compartments * Rear wing doors with step * Side door with sliding window and step Bdsdpo Afrrwofx Agkji * All-round work lights * Partition with sliding window * Ambient lighting left, right and rear * 2x interior lighting, bright white and blue * Cab with 2 seats * 2x air conditioning, front and rear * Automatic transmission * Telma retarder * Electric windows * Electrically adjustable and heated mirrors * Searchlight * Daytime running lights * Driver and passenger airbags * ABS and ASR * Rear axle with dual tires * Extra pneumatically extendable step at the rear * Superstructure dimensions: L=3,650 x W=1,900 x H=1,980 mm * Wheelbase: 3,650 mm * GVWR: 5,000 kg * Unladen weight: 4,415 kg Proper all-season tires from Conti, DOT 2023, with approximately 8.0mm tread depth in the front and approximately 6.5mm in the rear. Engine, automatic transmission, and rear axle are dry. The engine runs smoothly and the automatic transmission shifts cleanly. Starter battery is new. +++ Errors, changes, and prior sale are reserved.

Year of construction: 2017, operating hours: 2,000 h, condition: excellent (used), functionality: fully functional, machine/vehicle number: 51.I613-020-01, The IFE SORT is a density sorting machine based on the fluidized bed system for fine, dry bulk materials. The function of this air separation table is based on a combination of vibration and air technology. Heavy components are conveyed upwards by vibration, while lighter components are kept suspended by injected air and consequently float downwards. The applications include recycling and secondary raw material processing, as well as the wood, food, and mining industries. Standard version: consists of a basic unit with a perforated plate insert driven by two unbalanced motors and a fan with a motor. Bsdpfx Agszkup Eoksdi Nominal width: 600 mm; sieve aperture 0.6 mm Capacity: up to 3 tons/hour in recycling – however, this is highly dependent on the density and size of the material being processed. Easy adjustment: of impact angle, amplitude, inclination, speeds, etc. Design: dust-tight Control cabinet: is not included; 2 x 500 W unbalanced motors and 1 x 4 kW fan The machine was in operation at an R&D center in Israel. As the company now operates a production facility in the Netherlands, the R&D center will be closed. The machines will be transported to Europe at the owner's expense and can be delivered ex works at a port or at the production facility in the Netherlands. The details for optimal transport need to be clarified. The machine price does not include packaging on a pallet.

Condition: used, functionality: fully functional, power: 36.5 kW (49.63 HP), first registration: 10/2013, fuel type: diesel, fuel: diesel, Year of construction: 2013, operating hours: 357 h, Equipment: air conditioning, all wheel drive, car registration, differential lock, hydraulics, * 4-cylinder, 4-stroke diesel engine with 36.5 kW / 50 hp or 49.2 kW / 67 hp, water-cooled * 2,600 cc displacement * Permanent all-wheel drive via hydraulic wheel motors on each wheel Special paint finish RAL 9010 white Work package 1 Front lift including towing hitch CAT IN / CAT I with passive tilt adjustment Rotating beacon Support strut Bedpfx Agezd Riujkjdi Hydraulic set, flow divider 1 Flow divider for circuit 1, adjustable from 0–25 l/min with line set to the front and rear Return line to the front and rear Hydraulic set, flow divider 2 with tandem pump Flow divider for circuit 2 with tandem pump adjustable from 40–60 l/min line set to the front and rear return line to the front and rear leakage oil line to the front and rear Hydraulic tilting device for superstructure frame Hydraulic set 1 consisting of: - 2 double-acting control valves with floating position - 4 quick couplings at the front - 2 quick couplings at the rear, connected via a T-piece with quick couplings at the front - Small joystick including floating position for front lift TIRE 31x10.5 R15 Overall outer width 120 cm narrow, 140 cm wide when mounted Mudguard kit, narrow Multifunction joystick Flat roof Cabin mounted in the center Hydr. tilting device for cabin Holder platform body, complete with substructure Internal dimensions approx. 1250 x 1060 x 400 mm Flow divider automatic Rotating beacon, LED Work light, LED Red/white warning marking The following winter attachments can be purchased separately: Roller spreader with hydraulic drive RA-C 06/42 940 mm tipping platform, combined, for sand, gravel, and possibly salt Rear light design similar to the vehicle Paint RAL 2011 Roller width: approx. 940 mm Spreading width: approx. 1250 mm Weight (empty): approx. 220 kg Spreading rate regulation adjustable via rotary knob in the driver's cab Proportional oil flow regulator, complete with cable and connector mounted on the spreader Semi-automatic, speed-dependent only valid in conjunction with item 2 Deactivation of the roller when the vehicle stops Cable sets Control for spreader filling level Hummel front sweeper 145 cm working width hydraulic center drive – serial no. 980 Hummel MS-M1450HO front sweeper Front lift CAT 1 Center drive hydraulically via 3/4" chain Dirt collection roller Support feet 1 adjustable heavy-duty wheel in the center Horizontal adjustment hydraulic pivoting hoses and couplings Subject to changes, typing errors, errors and prior sale. All information is provided without guarantee. The sale is made with the exclusion of any guarantee or warranty.

Condition: like new (used), Year of construction: 2024, functionality: fully functional, For sale is a like-new Hundegger Speed-Cut SC480, including a fully automatic loading system, Pick & Feed 1000. Speed Cut SC480 Processing range: - Timber cross-sections from 20 × 40 mm to 240 × 480 mm Bdsdpez Da Htofx Agksi - Timber lengths up to 13 m Equipment: - 5-axis sawing unit - Infeed and transfer cross conveyor for timber lengths up to 13 m - Hydraulic lifting table for timber lengths up to 13 m - Combination support for vertically operating tools - Drilling unit 3 kW, drilling direction vertical - Vertical finger milling cutter 6.5 kW - 4-axis revolving milling cutter 7.5 kW - Drilling unit 3 kW, drilling direction horizontal - Single-blade milling cutter - Marking device at the rear - Inkjet labeling system HP (from the rear) - Label printer at the control panel - Central lubrication - Additional screen at the control panel - Additional screen in the discharge area - Floating dust extraction Pick & Feed 1000 Fully automatic loading system: - For timber lengths up to 13 m - 10 rack positions Special features: - System has been in operation since January 2025 - Extensive special equipment - Immediately ready for use - Ideal for timber construction, prefabricated construction, and joinery businesses Inspection: The machine can be inspected by appointment. We will gladly provide further technical information, photos, or videos. Location: Switzerland, Canton of Bern

Condition: like new (used), functionality: fully functional, Year of construction: 1999, operating hours: 24 h, overall weight: 1,200 kg, total width: 1,000 mm, total height: 2,500 mm, I am selling stainless steel MK2 M&P engineering onion peeler, machine is fully refurbished, after full service & ready to work. The large onion peeler from M&P engineering tops, tails and peels onions of 45mm to 115mm diameter using self adjusting floating knife assemblies over a range of up to 25mm on any one setting. It then slits the onion horizontally from top to tail, the depth of slit is determined by onion quality and grade. The machine finally removes the skin using compressed air providing an end product of optimum appearance. Link for video presentation by producer: Bedpfx Agourb R Ejksdi Excluded air screw compressors but for serious enquire i could help out with additional equipment. Capacity 2700- 4500 kg /h of peeled onion

Condition: good (used), functionality: fully functional, power: 88.26 kW (120.00 HP), fuel type: diesel, lifting height: 7,000 mm, Year of construction: 2016, operating hours: 7,476 h, Equipment: cabin, pallet forks, Telescopic handler MERLO TF 35.7 (Turbofarmer) Year of manufacture: 2016 According to the hour meter: 7,476 hours 120 hp Deutz engine 40 km/h hydrostatic transmission 7-meter lifting height 3.5-ton lifting capacity - Includes pallet forks - Additional hydraulic circuit to the fork carriage - Hydraulic quick coupler - Tow hitch at the rear - Floating position for the lifting arm - Differential lock - Powerful machine for agriculture! Bdjdpfxezufave Agksi - In excellent optical and technical condition! - Includes CE and COC certificates! - Includes all other documents! Selling price: 33,900.00 EUR net (including pallet forks) New bucket or new work platform available for an additional charge! Affordable delivery options are also available!

Condition: ready for operation (used), Year of construction: 2023, controller manufacturer: TRUMPF, controller model: Touchpoint TruBend, overall weight: 30,000 kg, total width: 5,150 mm, total height: 2,995 mm, product length (max.): 6,500 mm, Folding machine manufactured in 2023. This TRUMPF TruBend Center 7030 (B34) features a maximum bending edge length of 3,123 mm and a holder clamping force of 101 t. It includes a 2-axis part manipulator with a travel of 2,653 mm and an automatic loading/unloading system. If you are looking to get high-quality bending capabilities, consider the TRUMPF TruBend Center 7030 (B34) machine we have for sale. Contact us for further details. • Construction: Welded steel frame; Bending system: Wedge drive; Crowning: Included, adjustable via control • Capacities • Max bending edge length: 3,123 mm • Min bending edge length: 200 mm • Min bending width with standard holder: 145 mm • Min bending width with ENW tools: 40 mm • Max box height: 220 mm Bdjdj Afpmljpfx Agkoi • Holder clamping force: 101 t • Material thickness: min 0.4 mm; max structural steel 3.0 mm; max stainless 2.2 mm; max aluminum 4.0 mm • Manipulation and positioning (integrated) • 2-axis part manipulator with 12 suction modules; X travel 2,653 mm; stroke 100 mm • 5-axis rear stop; Rotary manipulator; Front stop; Loading pincers • Automatic part positioning and rotation • Speeds • Y-axis rapid traverse: 250 mm/s • Front stop: 3,000 mm/s • Part manipulator: 3,000 mm/s • Rotary manipulator: up to 3 rev/s • ToolMaster Bend: 2,400 mm/s • Positioning accuracy • Y: 0.10 mm; X: 0.05 mm; R: 0.05 mm • CNC control • 21.5" touchscreen; Windows 7 Ultimate 64-bit; keyboard and mouse • USB; RJ45; Ethernet 10/100 Mbit/s; Internet teleservice/remote diagnostics • Programming software • TecZone Fold floating license • Automatic programming from 2D/3D, automatic bending program generation • 3D bending simulation; collision checking; manual program modification • ToolMaster Bend (automatic tool handling) • Automatic hold-down tool positioning and setup per program • Automatic positioning of standard, Pick&Place, and curved holders • Included tooling • 16 standard hold-down tools (160 mm each) • 6 Pick&Place hold-down tools; segments 10/15/20/40 mm • Corner hold-down tool, length 199 mm • OBW90 and UBW90 bending tools • ENW equipment • ENW function for tilting hold-down tools • ENW110-40 tool, length 3,123 mm, depth 40 mm • Min bending width with ENW: 40 mm • Bend angle measurement • Optical bend-angle assistance with integrated camera • Graphical comparison of programmed vs. actual angle • Minimum part-side length for angle measurement: 10 mm • Safety • CE certification; rotating safety doors; safety light barriers • Working-area access protection; foot switch with enable; emergency stop • Electrical power supply: 80 kVA Additional equipment • Automatic loading/unloading system with storage interface • Automatic blank separation and feeding; transfer to bending center • Automatic finished-part unloading with belt conveyor • Max blank size: 3,048 x 1,500 mm • Storage interface included • Loading trolley: not included • Rail set: not included • Additional part handling modules • 12 three-surface vacuum modules (upper/lower/front suction) • 6 magnetic modules and 4 two-surface magnetic modules • Vacuum and magnetic modules can be used together • Identification and connectivity accessories • Wireless 2D code reader with Bluetooth • Barcode and DataMatrix code reading • Automatic production program loading

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, machine/vehicle number: 030-062962, type of input current: three-phase, input voltage: 400 V, input frequency: 50 Hz, pressure: 8 bar, cutting length (max.): 6,000 mm, LiSEC ESL-6030RS-L – Automatic Glass Cutting Line Complete automatic LiSEC line for precise and high-speed cutting of float, Low-E and laminated glass. Manufactured in 2013, the line consists of four interconnected components that together form a complete system for glass loading, transport, cutting and breaking. The cutting table is equipped with a magnetic drive and a Low-E coating removal head, allowing coating removal and glass cutting within the same process. Line Components: 1. Float and Low-E Glass Cutting Table - Model: LiSEC ESL-60/30RS-L - Serial number: 030-062962 - Year of manufacture: 2013 - Glass thickness: 2–19 mm - Cutting of straight and irregular shapes - Low-E coating removal system 2. Laminated Glass Cutting Table - Model: LiSEC VB-33 - Serial number: 040-014769 - Year of manufacture: 2013 - Designed for cutting laminated glass - Supported configurations: 33, 44, 55, 66 and 88 3. Glass Breaking Table - Model: LiSEC BTS-37/33 - Serial number: 054-054715 - Year of manufacture: 2013 - Weight: 1,525 kg Bdodoz Ilrispfx Agkoi - Maximum load: 55 kg/m² - Power supply: 400 V, 50 Hz - Connected load: 10.89 kVA - Operating pressure: 8 bar - Protection rating: IP32 4. Tilting and Transport Table - Model: LiSEC ATH-60/30FD - Type: Double-Sided Moveable Glass Un/Loading Station - Serial number: 011-071248 - Year of manufacture: 2013 - Weight: 6,040 kg - Maximum load: 48 kg/m² - Power supply: 400 V, 50 Hz - Connected load: 7.80 kVA - Operating pressure: 6 bar - Equipped with new mechanisms and vacuum suction cups for handling glass sheets Condition: - The complete production line is in good working condition and fully operational, - Documentation and additional technical information are available upon request, - A set of spare parts is included with the production line, along with an estimated value of the spare parts, - The production line will be available for collection from December 2026, - On-site inspection of the machinery is possible by prior arrangement. Note: - Glass racks for jumbo glass sheets are not included in the sale (we provide drawings for their construction) - The metal guideways in the floor for the Tilting and Transport Table are not included in the sale

Condition: used, EFCO Glass Tempering Plant 750 °C Thermal glass tempering plant for the production of single-pane safety glass / tempered glass For sale is a professional, industrial glass tempering plant from the renowned British manufacturer EFCO Furnaces Ltd. The plant is ideally suited for the thermal tempering of flat glass for the production of single-pane safety glass (tempered glass). System components & design Oven inlet & roller conveyor: The horizontal roller conveyor automatically transports the glass panes through the safety gate into the closed heating chamber (oven). Cooling system / fans: Powerful radial fans (blowers). These are essential for the thermal tempering process, in which the heated glass is rapidly cooled with air ("quenched") to create the necessary surface tension. Outlet & quenching area: A precise roller conveyor with ceramic or special rollers, on which the glass is held flat and transported during the cooling process. Control & electronics: A central main switch cabinet with PC visualization for monitoring the temperature zones, as well as separate operator terminals with analog pressure and temperature displays (e.g., for the air pressure of the fans). Technical data: Manufacturer: EFCO Furnaces Ltd. Type: Glass Temperer Maximum temperature: 750 °C Rated power: 220 kW Heating zones: 10 separately controllable zones (for precise temperature profiles) Voltage: 380 V / 3 phases Maximum glass size: 1,200 × 2,400 mm Glass thicknesses: 3–19 mm Overall length: 16,800 mm Overall width: 2,800 mm Overall height: 2,250 mm Bjdpfxsz Hm Ipo Agkedi Year of manufacture: 2001 Conformity marking: CE-certified Dimensions (L x W x H): 16.80 m x 2.80 m (width up to fan connection) x 2.25 m For clear float glass, heating times of approximately 40–50 seconds per millimeter of glass thickness can be assumed. Estimated production capacity Glass thickness Heating time Calculated batches/h* 3 mm 120–150 sec. 24–30 4 mm 160–200 sec. 18–22 5 mm 200–250 sec. 14–18 6 mm 240–300 sec. 12–15 *Theoretical upper limit based solely on the heating time. Transport, quenching, and cooling times can reduce the throughput. Production area With the specified maximum glass size of 1,200 × 2,400 mm, the area is 2.88 m² per fully loaded batch. The actually usable area may be smaller. Complete set of replacement ceramic rollers: A full, unused/new set of high-quality transport rollers (fused silica rollers) with a new value of over €10,000 for the oven area. "One-stop shop: We would be happy to offer you a suitable bank financing option for your project." More items - new and used - can be found in our shop! International shipping costs on request!

Condition: used, mileage: 2,42,466 km, power: 120 kW (163.15 HP), first registration: 05/2015, fuel type: diesel, overall weight: 5,000 kg, color: white, gearing type: automatic, emission class: euro5, number of seats: 2, total length: 6,450 mm, total width: 2,080 mm, total height: 2,900 mm, Year of construction: 2015, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, Special equipment: 1 DIN slot in the front under the headliner, airbag on the passenger side, hill start assist, exhaust pipe in front of the rear axle on the left, exterior mirrors without integrated turn signal, outside temperature display, battery 100 Ah, additional battery (reinforced), 1-pole battery disconnect switch, turn signals at the front on the side, roof control unit with reading light on driver/passenger side, entry lights, additional main key, folding cover for storage compartment, configurable special module, spare wheel with Super-Single tire (235/65 R16), spare wheel holder under the end of the frame including jack, interior rearview mirror, rear wall with window, mud flaps at the front, seats in the cab: passenger seat comfort, seats in the cab: driver's seat comfort, reinforced rear stabilizer, reinforced front stabilizer, fuel gauge for auxiliary heater, separating relay with additional battery, rear wall lining, thermal insulation of the driver's cab, heat-protective glazing (windshield with band filter at the top), auxiliary heater (air) electric Additional equipment: Adaptive brake light, airbag on the driver side, indicator for windshield washer fluid level, exterior mirrors electrically adjustable and heated, both sides, brake assistant, braking system with ABS+ASR, headliner in the cab, lockable glove compartment, body/superstructure: standard platform, fuel tank: main tank 75 liters, headlight range adjustment, truck approval, engine 2.1 liters - 120 kW CDI CAT, wheelbase 3665 mm, smoker's package, low emissions according to Euro 5 emission standard, safety belt system with warning system (driver side), seat cover/upholstery: fabric Lima, maintenance interval indicator Assyst, permissible total weight 5.00 t, dual tires on 2nd axle / rear axle * 1st owner * Rear axle with air suspension * Ambulance and rescue vehicle with box body * Superstructure from WAS * Adjustable floating table * Stretcher frame * Light carrying chair * Central locking for patient compartment * KONVEKTA air conditioning * 1 attendant seat * Refrigerator compartment * Warming cabinet * Sink * Medicine cabinets * Oxygen and suction system pre-installed * 12 + 230 Volt sockets * Skylight * External storage compartments * Rear wing doors with step * Side door with sliding window and step * All-round work lights * Partition with sliding window Bedpj Afrrqsfx Agkodi * Ambient lighting left, right and rear * 2x interior lighting, bright white and blue * Cab with 2 seats * 2x air conditioning at the front and rear * Automatic transmission * Telma retarder * Electric windows * electrically adjustable and heated mirrors * Searchlight * Daytime running lights * Driver and passenger airbags * ABS and ASR * Dual-tired rear axle * Extra pneumatically extendable step at the rear * Superstructure dimensions: L=3.650 x W=1.900 x H=1.980 mm * Wheelbase: 3.650 mm * Permissible total weight: 5,000 kg * Unladen weight: 4,415 kg Proper all-season tires from Conti, DOT 2024, at the front with approximately 6.0 mm and at the rear with approximately 4.0 mm tread depth Engine, automatic transmission, and rear axle are dry The engine runs smoothly, and the automatic transmission shifts cleanly Starter battery is new +++ Errors, changes and prior sale reserved

Condition: used, Year of construction: 2007, 2007 | DAF CF 85.480 RSP | Used Suction Excavator | 188940 kms 📍Location: France 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 39900 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* Bdjdpfx Agoykuvmoksi 👷‍♂️ Inspected by an independent expert 40 inspection points 30 approved ✅ 5 imperfect ℹ️ 5 issues ⚠️ 📌 Inspector's Comment: Good overall condition of the suction excavator, but not everything is functioning correctly. The tractor part is working properly. The radio is missing from the cabin. Error message on the dashboard. Alert, exhaust system pipe. Two remote controls provided for the vacuum. Presence of oxidation on the external part of the bucket. The batteries were started with a booster. It is not possible to operate the hydraulic part, meaning deployment of the stabilizers, opening of the bucket, and tipping the bucket is impossible to operate the hydraulic arm. 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "40181 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: used, Year of construction: 2007, 2007 | DAF CF 84.460 RSP | Used Suction Excavator | 232536 kms 📍Location: France 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 39900 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 41 inspection points 31 approved ✅ 10 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: Good overall condition of the suction excavator. Quite significant tire wear. Presence of oxidation on the bucket and turbine. All functionalities are working. Ability to cut off the air valve on the rear left of the vehicle. Damage to the rack dampening the access door on the right side. Absence of the GNR tank cap. Presence of two remote controls. Absence of the AD Blue tank cap. 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "40180 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals Bsdpfoyi Enwsx Agkjdi ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: like new (used), Year of construction: 2024, operating hours: 100 h, functionality: fully functional, machine/vehicle number: 90L0865829G_00, overall weight: 1,000 kg, input frequency: 50 Hz, type of input current: AC, input voltage: 400 V, The CMS Proxima is an automatic horizontal edging machine (dry edging machine) from CMS Glass Technology for processing glass edges. Processing length: The maximum working length per cycle is approximately 2.6 to 2.7 meters (larger panes can be accommodated). Glass thickness: Can process glass from approximately 4 to 19 mm. It can be operated either as a stand-alone unit (with a simple setup table) or in combination with tilting float cutting tables or laminated safety glass (VSG) cutting tables. Bsdoz E Axzjpfx Agkodi

Condition: like new (used), Year of construction: 2021, Bainite BM 95 L INTERMESHING rubber internal mixer / available immediately Model: 95 L IM Intensive mixing of various rubbers Rotor type: HP-5 Type Design Tank capacity: 95 liters Dosing opening size: 860mm x 407.7mm Dosage (Kg.): 95 x Sp. Gr. compound x filling factor Bdsdpfxjy E I Awe Agkoi The filling factor is a function of the viscosity of the compound, the rotor speed and the pressure on the suspended weight. It is a value between 0.65 and 0.90. A typical charge size for a rubber mixture is 95 x 1.15 x 0.65 = approx. 72 kg / charge. Motor power: 420KW, 1000RPM, 415V, 50 Hz AC Motor Rotor speed: 6 to 60 rpm Active cycle time: Continuous Discharge door: Hydraulically operated sluice door in the side of the chamber: Peripherally drilled Floating weight: Hydraulic operation The mixer: approx. 10t The main motor: approx. 5t The main gearbox: approx. 5t The main control panel: approx. 1.5t

Condition: used, Year of construction: 2022, HORIZONTAL PANEL SIZING SAWS GABBIANI P KEY FEATURES INDIVIDUALLY SELECTABLE AIR CUSHION TABLE: AN INDISPENSABLE TOOL LATERAL SAFETY DEVICES: MORE SPACE FOR WORKING FLOATING CLAMPS: THE GUARANTEE FOR A PERFECT CUT TECHNICAL DATA GENERAL SPECIFICATIONS gabbiani p80 Saw blade overhang mm 80 Work table height mm 950 Number of clamps standard 5 Number of clamps maximum for versions 33 9 CUT DIMENSIONS Version 33 (Opt.) mm 3300x3200 AXIS SPEED Variable saw carriage speed m/min 6 – 60 Variable slider speed () m/min 60 MAIN SAW BLADE Motor power (S6 -40%) - 50hz (Star-delta start) kW (HP) 7 (9) (11) Speed – 50 hz U/min 4650 Saw blade diameter mm 340 Arbor diameter main saw blade mm 80 SCORING SAW Motor power (S6 -40%) - 50hz kW (HP) 1,5 (2) Speed – 50 hz U/min 5850 Scoring saw diameter mm 200 Arbor diameter scoring saw blade mm 80 INSTALLATION Installed power Kw 12÷15 Base machine voltage Euro Voltage (400 V / 50 hz) Compressed air requirement l/min 300 Required compressed air pressure bar 7 Extraction air requirement m3/h 2190 Extraction air speed m/sec 20 Extraction port diameter mm 4x120 () Note: for countries where EC standards apply, the forward feed speed of the slider is limited to 25 m/min. GENERAL FEATURES Automatically controlled horizontal panel sizing saw with PC/PLC control, for cutting panels made of solid wood, MDF, chipboard, plywood and similar materials. Machine frame and work table - Machine frame made as a steel tube construction - Work table made of rib-reinforced steel with Bakelite coating - Longitudinal stop on the left side Saw carriage made of steel, consisting of: - a motor for the main saw blade and a motor for the scoring saw blade - Vertical stroke of the saw blade on linear ball bearing guides and shoes - Running rollers made of hardened and ground steel - Balanced mass distribution to ensure the best cutting quality - Running direction against the longitudinal stop - Saw carriage drive via rack and pinion - Carriage run on cylindrical guides - Cylindrical guides made of hardened and ground steel (5-year guarantee), protected by special dust scrapers - Pneumatic switch for quick and safe changing of the main saw blade and the scoring saw Pressure beam - Pressure beam with uniform pressure on the workpiece over the entire cutting length with recesses to prevent collisions with the clamps; pneumatic height adjustment via high-precision racks and pinions, pressure adjustable from 1.5 to 6 bar - Double extraction system with a unit above the pressure beam to clean the work table and a unit below on the saw carriage - Lateral automatic aligner with pneumatic cylinder over the entire length. Sliding on linear ball bearing guides and shoes. * Travel: 1200 mm * minimum working width: 60 mm * maximum working width: 1200 mm Positioning slider and rear part of the machine - Positioning slider over the entire length with motor drive via a robust shaft. Positioning slider movement on a double T-beam. The drive is via 2 precision pinions, which guarantee constant parallelism between the slider and the cutting line. The slider is controlled by a brushless motor to enable the regulation of the speed according to the requirements for positioning and a quick return - Stepless dru Bdsdpfxez Ehvxs Agksi

Condition: used, Year of construction: 2021, controller model: , _____ Description: Year of manuf. : 2021 TruBend Center 5030 :- Robust machine frame : - Angular direct drive :- Crowning system :- Machine control with touchscreen operation :- TecZone Fold programming – floating licence :- 2-axis part manipulator with suction modules :- 5-axis backgauge :- Optical angle assistant :- ToolMaster :- Hold-down tools :- OBW90 and UBW90 bending tools Bodpfjz Sw Niex Agkodi Technical specifications Minimum bending depth (standard tool):145 mm Minimum bending depth (with additional hold-down tool):40 mm Maximum bending length:3,123 mm Minimum bending length:80 mm Hold-down force:101 t Maximum box height:220 mm Minimum material thickness:0.4 mm Maximum steel material thickness:3 mm Maximum stainless steel material thickness:2.2 mm Maximum aluminium material thickness:4 mm Rapid traverse Y-axis (press beam):250 mm/s 5-axis backgauge:1,700 mm/s ToolMaster Bend:2,400 mm/s Dimensions and weight:6,500 x 3,150 x 2,995 mm / 26,000 kg Features :- ACB Laser :- DMC Bluetooth 2D barcode scanner :- Set of 3-surface suction modules (12 pieces) :- Support brackets (2 pieces) :- Additional hold-down tool function (ENW) :- Additional bending tool function (ZBW) :- ENW110-50 – Length 3,123 mm :- ZBW400 – Length 940 mm

Condition: used, working width: 850 mm, For inquiries regarding the attachment, please contact Mr. Herden (tel. ). Seppi M. H3 085 / Flail mower / Mulcher / incl. MS03 / DEMO unit / in stock & immediately available / Top condition! Price: €5,990.00 net / €7,128.10 gross The mulcher was only used briefly once! - Working width: 85 cm - Overall width: 97 cm Bdsdpfxjz Ht E Ij Agksi - Depth: 80 cm - Height: 66 cm - Weight: 181 kg Equipment: - incl. MS03 adapter plate - Mulching head for mounting on a hydraulic arm - mulches grass and shrubs up to 3 cm in diameter - for excavators from 2 to 5 tons - for mounting on various attachment plates - floating mounting (parallelogram guidance) - indirect V-belt drive with 3 V-belts - drive designed for hydraulic motor depending on the flow rate of the carrier device - housing made of wear-resistant AR400 steel - front protection with chains - rear protection made of rubber - reinforced support roller with double tapered roller bearing, height adjustable - Color: red RAL3020 · anthracite RAL7021 OPT 039 Rotor with SMW flails (Standard) - 9 pieces, part number 150.02.041 OPT 428 Hydraulic gear motor 11cm³ - with flow control valve and motor safety valve DRAIN SAFE TM protects the motor in case of incorrect use - required hydraulic pressure in bar (min-max): 150 - 250 - required hydraulic flow rate in l/min (min-max): 20 - 50 OPT 529 DRAINLESS system with pressure accumulator (NO leak oil line needed!!) - including hoses and check valve 2 hydraulic lines are required: supply and return. No leak oil! The unit is supplied without hoses and connections. We have many other adapter plates (MS01 / MS03 / MS08 / CW05 / CW10 / CW20 / OQ65 / OQ70/55 / etc...) in stock and immediately available. In our warehouse, we have a very large selection of various Seppi M. products that are immediately available! Mr. Herden (tel. ) will be happy to assist you. Upon request, we will also be happy to provide you with a financing offer. We are an official Seppi M. sales and service partner. We are an official Westtech sales and service partner. We are an official Gierking GMT sales and service partner. We are an official OilQuick sales and service partner. We are an official Weber MT sales and service partner. We are an official Holp sales and service partner. We are an official DMS sales and service partner. We are an official Magni telehandler sales and service partner. We are an official JCB construction equipment sales and service partner. We are an official Mercedes-Benz sales and service partner. We are an official Iveco sales and service partner. Furthermore, with 800 used vehicles, we are one of the largest commercial vehicle dealers in Germany. We will supply you with the complete Seppi M. range! Errors and prior sale excepted! Internal No.: 520013 = Further information = Year of manufacture: 2024 Please contact Marius Herden for more information.

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, total length: 8,200 mm, total width: 3,800 mm, overall weight: 5,250 kg, Tiltable automatic float glass cutting table for jumbo sizes : 6000 x 3210 mm min. glass size : 350 x 180 mm Bodpfoz N Dqujx Agkjdi glass thikness : 2,3 - 19 mm This table has NO option for low e deletion

Condition: new, Year of construction: 2026, functionality: fully functional, load capacity: 10 kg, arm reach: 1,101 mm, controller manufacturer: FANUC, controller model: R-30iB Plus (Mate Cabinet), teach pendant manufacturer: FANUC, teach pendant model: iPendant Touch, type of input current: AC, repeat accuracy: 0.01 mm, warranty duration: 24 months, Equipment: documentation/manual, Basic information: Teximp Universal Robot Cell is an all inclusive robotic automation solution for your CNC machine. The URC-10S is based on Fanuc LR-10iA/10 suitable for smaller machines. It consists of: 1) Robot: - Fanuc robot LR-10iA/10 6-axis vertical robot Load capacity 10 kg / reach 1101mm Mate cabinet I/O modules; DI16 / DO16 DCS Dual Check Safety Position (J567) Soft Float (J612) Touch Skip (J921) Singularity Avoidance (R792) User Socket Messaging (R648) Karel (R632) 2) Part Table: Compact but heavy part table with front entrance. Table size 980 x 700mm Three pins for quick pallet changing Reer safety light curtain, cat.4 Control button 3 LED status beacon Electrical cabinet and cables 3) Safety Options The Cage is our standard solution. All URC cells can also be delivered in the "Laser" version, which is designed for optimal accessibility. The price of the cells remains the same regardless of the chosen version. - Cage (Standard) - Omron Laser (Alternative) - Reer Light Curtain (Standard) 4) Interface to the Haas machines Teximp Robot Interface includes all needed to connect the URC to any Haas machine. Support Haas Mill and Lathe machines, with NGC and CHC control. (If your machine is not Haas, we can adjust robot-machine interface. Note: this will be additionally charged) Bdsdpfx Ao Abq Sbjgkoi Communication CNC < = > URC, I/O, M-fin, safety Preparing for a Clamping device (2nd clamping device available) Preparing for a PAD Preparing for an external Air Blow 5) Gripper Configuration The Teximp Gripper Interface includes everything needed for clamping parts on the robot side. - Gripper carrier 90° Schunk Gripper JGP-P 100-2 (2 pcs) Stroke per jaw [mm] = 5 Recommended workpiece weight [kg] = 8.75 ABR-PGZN-plus 100 blanks made of aluminum for rework by the customer Sensors G1/G2 - clamped/unclamped Blower nozzle Other possibility: - Gripper carrier 180° Schunk Gripper JGZ 100-1 (2 pcs) Stroke per jaw [mm] = 10 Recommended workpiece weight [kg] = 9 Sensors G1/G2 - clamped/unclamped (4 pcs) Blower nozzle 6) Automatic Door system Our robot cell includes an Auto Door for any Haas machine, with two available solutions: the original Haas Smart CAN DC Auto Door for machines built in 2020 and later, or Teximp’s Pneumatic Auto Door for older machines. PAD-HaasVF-side PAD-HaasVF-front PAD-HaasMM-front PAD-HaasST PAD-HaasUMC - PADs for machines without the original side door/window are also available. 7) Programming Option (HMI) Enables intuitive interaction with Teximp robotic systems through a visual interface, facilitating configuration, monitoring, and optimization of operations. It allows operators to program quickly and easily, without the need for Fanuc programming knowledge. Operators can easily adjust jobs for different products/parts and then save them as "Recipes", enabling a complete robot setup change with just one click on the screen. This simplifies the programming process and minimizes downtime. - Easy visual programming - No additional hardware required Note: - We provide transport, installation, commissioning and operator training at additional cost. - You will have our full support during the ramp-up phase of the robotic cell, as well as for all other needs and requirements regarding our system.

Year of construction: 2016, condition: good (used), functionality: fully functional, machine/vehicle number: 45129, FISA Ultrasonic Mold Cleaning System 3 VST 1200/P-INSON+Z1, Year of Construction 2016 Manufacturer: FISA Ultraschall GmbH / FISA Manufacturing Srl Type: Special 3 VST 1200/P-INSON+Z1 Year of Construction: 2016 Serial Number: 45129 Internal dimensions of the tanks: approx. 1,600 × 600 × 1,250 mm Maximum mold weight: 2,200 kg Description Bsdpszx Eftofx Agkodi Offered is an industrial FISA ultrasonic cleaning system for cleaning and maintaining large injection molds, die-casting molds, and other molds, as well as heavy components. The system consists of three stations arranged one behind the other for ultrasonic cleaning, cold rinsing, drying, and preservation. The design is intended for workpieces or molds with a weight of up to 2,200 kg. The VST 1200 cleaning station is designed as a noise-insulated INSON version. It features a pneumatically operated hinged cover, automatic water supply, safety float switch, vapor extraction with fans, and an adjustable timer. The ultrasonic generation is provided by two FISA USM 28/R generators and four MAGNASONIC transducers FB 550 PLAN. A cold rinsing station VST 1200 and a drying and preservation station VST 1200/P with Option D are connected to the cleaning station. The preservation station also has a pneumatically operated hinged cover, a vapor extraction system, and a sight glass for liquid level control. Above the preservation tank, there is a drip and blow-off station with side doors, a splash guard, an extraction system, and a flexible hose for blowing out the cleaned molds. Scope of supply - Cleaning station VST 1200 - Cold rinsing station VST 1200 - Drying and preservation station VST 1200/P - Two ultrasonic generators USM 28/R - Four MAGNASONIC transducers FB 550 PLAN - Pneumatically operated hinged covers - Vapor extraction system including fans - Drip and blow-off station - Stainless steel drip tray under the entire system - Two special mold support bars for a total load of 2.2 tons - Immersion rack VST 350 INOX with two inserts - Optical alarm indicator - Remaining runtime display - Weekly timer - Walkway with stairs and safety railing - Control cabinet and operating unit - Existing technical documentation Technical data - Usable internal dimensions: approx. 1,600 × 600 × 1,250 mm - Maximum workpiece load: 2,200 kg - Number of process stations: three - Sound power level according to the measurement report: 78 dB(A) - Design: Stainless steel - CE declaration of conformity available - Initial acceptance and instruction in 2016 documented - Drip tray: approx. 6,500 × 1,800 mm - Installation area including walkway and operating area according to drawing Condition Used industrial system. The system is shown fully assembled and connected in the pictures. A successful handover and instruction were documented in 2016. The current operating condition, the tightness of the tanks, the performance of the ultrasonic generators, and the function of the heating, pumps, pneumatics, extraction system, and control system should be checked again before sale or during an inspection. Inspection and functional testing possible by arrangement. Sale in the existing condition and scope of supply according to the illustrations and documentation. Dismantling, loading, and transport must be coordinated in advance due to the size and weight.