Used Forging Manipulator for sale (490)

Condition: like new (used), - Total height: 4300 mm - Arm length: 4000 mm - Schmalz vacuum suction cup - Suction cup height from the ground: 1700 mm - Maximum manipulator load capacity: 500 kg - Maximum horizontal suction cup load capacity: 400 kg Chedpfxsvkcv Dj Addof - Maximum vertical suction cup load capacity: 150 kg

Condition: ready for operation (used), functionality: fully functional, total height: 3,200 mm, total length: 3,500 mm, total width: 1,500 mm, overall weight: 10,000 kg, No minimum price – guaranteed sale to the highest bidder! Placing a bid obliges you to collect the item between 28/07/2025 and 31/07/2025. TECHNICAL DETAILS Codpewvi Hxjfx Addehf Ram weight: 400 kg Blow frequency: 120/min MACHINE DETAILS Total weight: 10,000 kg Overall height: 3,200 mm Overall length: 3,500 mm Overall width: 1,500 mm

Condition: used, overall weight: 4,95,000 kg, Year of construction: 1991, Complete Mechanical Upgrade by GFM, with increase of Power to 900 Ton/hammer and new CNC in 1991 Numbers ̈of Hammers: 4 Forging force: 3.600 Ton (900t per hammer) Maximum diameter of forging: - circular cross section: Ø 400 mm - square cross section: 320 mm Codpfx Adov D Ddvedjhf Minimum output diameter: - circular: 60 mm - square: approx 50 mm Maximum length of forging with/without lateral reception: 8.000 mm / 9.700 mm Workpìece weight: 2500 kg Min length: 1500 mm Max length: 3000 mm Engine forge: 2 x 500 kW, 5500 V, 50 Hz Total power supply (nominal power): ca 1.600 kW Machine weight: 493.000 kg

Condition: new, Year of construction: 2022, functionality: fully functional, machine/vehicle number: 21_0346, NEW - NEVER USED heavy-duty positioner for manual or robotic welding - lifting and turning device. Special Device for Special Tasks designed and produced by FÖRSTER welding systems GmbH. Max diameter of the workpiece: 2500 mm Chedpfx Adjurlcrjdjf Max weight of the workpiece: 20 tons Dimensions of the welding positioner: 7000x3000x3750 mm Weight [without counterweigh]: 20 000 kg Overall dimensions of the whole system: 8900x4800x3750 mm Total weight of the whole system: 40 000 kg Counterweight included with the machine. Full documentation available. Manufacturer's technical support on request. Machine located in central Poland.

Condition: as good as new (ex-display), Year of construction: 2022, Alfa Star pickers available in 3 versions: P 450V, P 650V, P 850WV Available immediately from stock in Poland Year of production - 2022 P450V Injection molding machine short-circuit force range -30-60 tons - €1799 Vertical stroke [mm] -450 Transverse stroke [mm] -120 Rotation angle [°] -60-90 Pickup time [s] -1.3 Max. load capacity [kg[ -2 Dry cycle time [s] -4.0 Air consumption (NI/cycle) -11 P650V Injection molding machine short-circuit force range -50-160 tons -1985 euro Vertical stroke [mm] -650 Transverse stroke [mm] -120 Rotation angle [°] -60-90 Pickup time [s] -1.7 Max. lifting capacity [kg] -2 Dry cycle time [s]-4.5 Chedpfeqwyi Djx Addof Air consumption (NI/cycle) -14 P850WV Injection molding machine short-circuit force range-160-300 tons -2495 euros Vertical stroke [mm]-850 Transverse stroke [mm] -200 Rotation angle [°] -60-90 Pickup time [s] -1.9 Max. load capacity [kg] -2 Dry cycle time [s] -5.8 Air consumption (NI/cycle) -14 More than 30 units available off-the-shelf, all with CE. We have access to spare parts and service. Offer for users and distributors

Condition: good (used), Year of construction: 1989, total height: 6,450 mm, For sale Beche short-stroke die hammer KGH 4B. Machine weight 65 t Cjdert Uc Espfx Addohf Working capacity 40 kJ max. impact frequency 98 min max. usable number of blows 41 min max. bear stroke 790 mm Machine is disassembled Technical data on request

Condition: excellent (used), Year of construction: 2021, Table Ø: 1000mm Table load on 200 mm:600 Csdpfjwvrbfsx Addjhf Table load on 400 mm:400 Table load on 600 mm:280 Table load on 1000 mm:200 Rotation table: 360.000° Length: 1200mm Width: 1200mm Height: 1400mm Weight: 1200kg

Condition: excellent (used), Year of construction: 2014, Vacuum unit for e.g. manipulator, Dalmec - used - : Price (net), ex location: only €995 Manufacturer: dalmec Type: vacuum lifter Year of manufacture: 2014 Code: 85.16.0991 Load capacity: 7kg. Operating pressure: 0.60Mpa With this unit, plastic stacking boxes with external dimensions (LxWxH): 1,190 x 610 x 420mm filled with cable harnesses were lifted (see photos below) Condition: very good Available: immediately Location: Emden, later warehouse Frankenberg / Saxony Chodpsvzli Ijfx Addjf

Condition: good (used), pressing force: 150 t, Hammer weight: 150 kg Stroke: 480 mm Strokes: 168 p/min. Throat: 375 mm Ram diameter: 180 mm Codpfsubb Stsx Addehf Country of origin: UK Motor power: 11 kW Machine LxWxH: 200 x 180 x 240 cm Machine weight: 6000 kg

Condition: ready for operation (used), Year of construction: 1955, An Eumuco screw forging press (Screw-Press) is available. Forming stages: 2, press force: 1250kN, hold-down force: 2500kN, stroke rate: 80rpm, ram stroke: 140mm, hold-down stroke + punch: 100mm, table dimensions X/Y: 680mm/680mm, ram dimensions X/Y: 680mm/680mm, drive power: 35kW. On-site inspection is possible. Chedpfxjwm Nm Te Addsf

Condition: not inspected (used), turning diameter: 6,300 mm, center width: 1,000 mm, workpiece weight (max.): 80,000 kg, overall weight: 15,960 kg, Used machine min. diameter: 1000mm max. diameter: 6300mm Chodpfx Adevtq H Nedjf Workpiece weight 80,000 kg EG: 15,960 kg

Condition: new, functionality: fully functional, Year of construction: 2024, operating hours: 1 h, VOLUMEC EasyArm 3 Three-articulated arm system including orbital attachment with clamp max. Ø 125mm - Working range: 1900 mm - Torque: max. 260Nm - Weight of the tool: 11.5 - 15 kg - Weight of the arm: 17 kg Milwaukee angle grinder NOT included in the price! The pantograph structure maintains the balance and at the same time absorbs the restoring forces of the torque tool. The swivel arm makes it easy to reach the optimal working position. WEIGHTLESSNESS. Chsdpfx Adjvtaqkedsf The EasyArm series was designed to accommodate tools or other devices up to a maximum weight of 30 kg. The structure of this system, made entirely of aviation aluminum, guarantees smooth, controlled movements and correct positioning of the tool. Vibrations and torques are absorbed. The selection of different stop and clamping positions as well as various accessories results in many different processing and application options. This allows different work areas to be realized. The use of these balanced articulated arms prevents premature exhaustion of employees. Higher productivity and better working health are clear advantages here. EasyArm is a complete series of balanced articulated arms that enables a wide variety of applications.

Condition: good (used), Year of construction: 2021, Remote control with frequence Foot switch control with frequence Load capacity per section:1,5T Vessel range Minimum: 200 Vessel range Maximum: 1500Ø Variable rotation: 80 - 950Rpm Cedpfx Adowvq Rlodohf No of wheels per section:2 Wheel dimensions: 200 x 100Ø x mm Length: 1010mm Width: 350mm Height: 457mm Weight: 200kg

Condition: good (used), Forging Hammer - Meitinger Record - Very good overall condition - Various forging inserts Chjdpfxsw H S Irj Addsf - Large support flange - Foot switch - Connection cable Dimensions (LxWxH): 1.5x0.7x1.7 meters / Weight: 1800 kg Errors and omissions excepted.

Condition: refurbished (used), Year of construction: 1974, functionality: fully functional, machine/vehicle number: 1276, CNC Hot Radial Forging GFM SX-13 New in 1974 / 2022 New control system PLC SIEMENS S7 Machine number: 1276 No. of Hammers: 4 Forging force each hummer: 160 Ton Hammer stroke / min: 700/min Hammer lenght: 240 mm Diameter setting range: 80 mm Maximum forging diameter: Structural steel, round-cross section: Ø 130 mm square cross section: Ø 115 mm Smallest dimensions forged: Ø 25 mm Manipulator A max. displacement: 6820 mm Manipulator B max. displacement: 7150 mm Maximum workpiece length: 6000 mm Rapid speed manipulator: 400mm/sec Total connected power: 300 kW 380 V, 50 Hz Machine dimensions: Forging height over floor: 615 mm Total height pf the machinr over floor: 1665 mm Total machine lenght: 32670 mm Total foundation lenght: 33400 mm Tot. machine width (without auxliary equipments): approx 3885 mm Total foundation width: 16000 mm Total weight of the machine: 84.000 Kg Codpfx Adjq U R T Nedohf

Condition: ready for operation (used), Year of construction: 1964, Forming stages: 3, press force: 6500kN, stroke rate: 110rpm, ram stroke: 180mm, working range X/Y: 600mm/800mm, table dimensions X/Y: 800mm/1000mm, ram adjustment: 10mm, drive power: 37kW. On-site inspection is possible. Cjdpfowm Nm Hex Addjhf

Year of construction: 2014, condition: excellent (used), functionality: fully functional, Equipment: compressed air system, For sale is a Zeilhofer hand manipulator Very good condition and very little use. Lifting capacity 250 kg - currently reduced by us to 100 kg Fresh service and UVV directly from Zeilhofer Device is mobile with the forklift - no dowels in the floor necessary Complete documentation and all documents available Vacuum head can be rotated 360 degrees and swiveled 90 degrees Second device available, which sucks upwards. Pictures on request Cjdpfxsu Hyl Ee Addohf Invoice will be issued

Condition: ready for operation (used), Technical characteristics Suction cup manipulator for solid wood Csdpfetr Siyjx Addehf Maximum load : 300 kg 1 suction pad 1800 x 160 mm Handlebar length : 500 mm Handle up/down Second hand machine and in excellent state (2022) Power and Motors Voltage: 380 V Pluging: Three-phased Overall dimensions

Condition: new, Year of construction: 2025, functionality: fully functional, lifter boy for loading sheet metal on laser machines Codovc U Shopfx Addohf easy operation ( vacuum pump are in the control unit) no cable by loading laser machine continu vacuum protection vacuum pomp work on battery and they are in operation unit battery loader included. 300, 600 and 800 kg save operation include battery loader ( buster type ) include mounting manual. CE complete pack in wooden transport box we can deliver till 6 meter long scheetmetal.

Condition: new, Year of construction: 2023, Manipulator with hydraulic height adjustment, faceplate with clamping slots and manual remote control. Height (faceplate horizontal): approx. 670 - 2,400mm Swivel range of face plate: approx. +-360°. Cedpfxsnqzt As Addshf face plate dimensions: Ø1.200mm x 40mm, 6x clamping slots Rotational speed of main axis: approx. 2.0 rpm (other Torque main rotary axis: approx. 13.000 Nm Speed of face plate: approx. 0.2-2rpm Torque face plate: approx. 10.000 Nm

Year of construction: 1974, condition: refurbished (used), functionality: fully functional, machine/vehicle number: 1293, CNC Radial Forging Machine GFM mod. SX-16 Manufacture: GFM (Austria) YOM: 1974 / 2022 Model: SXL-16 Machine number: 1293 PLC: Siemens S7 - Technology V4.2 with CNC Bosch Rexroth XM Numbers of Hammers: 4 Forging force: 800 Ton (200 t per Hammer) Strokes per minute: 580 Hammer length: 320 mm Maximum hammer setting scope - calculated by diameter: 100 mm Maximum diameter of forging regarding: - structural steel: circular cross section – Ø 160 mm square cross section – 130 mm - high alloy steel: circular cross section – Ø 120 mm square cross section – 100 mm Extreme quadrangle: 12 x 120 mm Maximum length of forging: 6000 mm Min and Max diameter of mounting in manipulator: 30 - 160 mm Feed of manipulator A: 6800 mm Feed of manipulator B: 7200 mm Passage through manipulator: Ø 130 mm Manipulators speed in fast move: 400 mm/s Feed speed of manipulators (stepless adjustment): 10 ÷ 115 mm/s Cooling water pressure: 3 ÷ 5 bar Temperature of inlet water: max. 30˚C Cooling water consumption: 34m3/h Pipe diameter for cooling water: 2” Compressed air pressure: min. 5 bar Pipe diameter for compressed air: Ø20 mm Consumption of compressed air: 1,5 Nm3/h Power supply (nominal power): 350 kW Motor voltage: 500 V Control voltage 220 V Power of main engine: 200 kW Power of pump motors: 185 kW Power of manipulators motors: 2 x 22 kW Dimensions of the machine Axis height of forging above the hall level: 750 mm Maximum height of machine above the hall level: 2.050 mm Maximum length of machine on the hall level: 33.740 mm Foundation length: 34.200 mm Maximum width of machine on hall level without loading equipment: 4350mm Foundation width: 15.600mm Machine net weight: 124.490 kg Chedpfx Aoq U Sa Seddsf

Condition: excellent (used), Walking beam-forging furnace, make Ruppmann max. temperature: 1.250°C Chsdpjid Im Eefx Addsf useable dimensions (l x w x h): 3.400 x 1350 x 120 mm throughput: 1 ton/h heating: natural gas Heating thru 4 hot air radiant ceiling Bloom burners, with flame monitoring by Kromschröder burners. Temperature measurement by thermocouples, as well as automatic and stepless temperature control. Heat exchanger, combustion air fan.

Condition: ready for operation (used), Technical characteristics Jib crane + vacuum lifting device Triangulated wall-mounted jib crane Jib crane length Vacuum lifter capacity 120kg Suction pad sizes: 290 x 110 mm Max. suction-cup center-to-center length : 2000 mm Width of suction pads : 1000 mm Power and Motors Voltage: 400 V Pluging: Three-phased Overall dimensions Cedpfxstxva Ns Addohf

Year of construction: 2022, condition: as good as new (ex-display), Manipulator with hydraulic height adjustment, face plate with clamping slots and manual remote control. Height (face plate horizontal): approx. 532 - 1.132mm Chodpfx Adefw Ah Rodef Lifting distance/lifting time (hydraulic): approx. s = 600mm, t = 20s Swivel range of face plate: approx. +-300°. Height (Pl.-sch.vertical axis): approx. 709mm Dimensions face plate: Ø1.200mm x 40mm, 6x clamping slots Speed of the main axle: approx. 2.0 rpm (other Torque main axis of rotation: approx. 7,500 Nm Face plate speed: approx. 2.5 rpm Face plate torque: approx. 1,500 Nm

Condition: refurbished (used), functionality: fully functional, Cold Radial Forging Machine GFM SX-10 YOM: 1971/2024 CNC: Siemens SINUMERIK ONE with PLC 1500 Forging Box Number of forging hammers 4 Max. forging force per hammer 1250 kN Number of strokes 1200 1/min Hammer lenght 135 mm Diameter setting range 60 mm Forge eccentric 3,5 mm Chuck head Clamping force max. 50 kN Advance speed max. 20000 mm/min Stroke 1290 mm Workpiece rotation 35-71 1/min Workpiece lenght max. 900 mm Counter holder Clamping force max. 50 kN Advance speed max. 20000 mm/min Stroke 1290 mm Mandrel Clamping force max. 20 kN Advance speed max. 18000 mm/min Stroke 800 mm Chodpjq U R Ruofx Addef Dimensions Lenght approx: 9100 mm Width (with electrical cabinets and control panel) approx.: 4500 mm Height forging machine approx.: 2150 mm Forging height above floor: 1250 mm Weight (forging machine) approx.: 29000 kg The machine is completely revamped with a new Electrics, Hydraulics, new Control and with functionality test before delivery.