Used Four Side Moulder for sale (682)

Condition: good (used), Year of construction: 1997, LAMEL MOULDER WEINIG HYDROMAT 22 BL Maximum working width : 220 x 140 mm Spindle diameter : 50 mm Infeed : 30 Kw ( Separate Hydraulic station ) Seperate electric cabinet : L 2200 x W 600 x H 2000 mm 1. spindle : 5,5 Kw 2. 5,5 Kw 3. 7,5 Kw 4. 7,5 Kw 5. 7,5 Kw 6. 11 Kw 7. 15 Kw Hnjdpfx Adoxa Hlkswsg 8. 37 Kw 9. 7,5 Kw 10. 7,5 Kw Steel cage with gas pistons over machine. External pump for central lubrication( For 200 L lubrication oil barral ) 5 Europallets with spareparts/tools/extra spindles included

Condition: excellent (used), Year of construction: 1993, functionality: fully functional, Crosscut circular saw with 2 double shafts – vertical and horizontal configuration. Designed for sawing battens, strips, slats, and separation cuts with minimal kerf width. Maximum cutting height: 200 mm. Maximum cutting width: 200 mm. Clamping bushings: 150 / 160 mm. Horizontal saws: 2 x 22 kW. Vertical saws: 2 x 30 kW. Feed speed frequency-controlled from 0 to 40 m/min. 8 pairs of powered feed rollers. Pneumatically adjustable roller pressure. Electric height adjustment. Electric width adjustment. Electrical control cabinet with operating system. Saw bushings and tools included. Sound-insulated cabin. The machine is in very well-maintained condition and was only used occasionally. There is no visible wear on the feed rollers. The unit has not been in operation for 12 years. Mechanization: - Infeed centering roller conveyor with adjustable feed gearbox. - Outfeed roller conveyor with integrated cross drag conveyor. - Both with adjustable feed gearbox. Mechanization system is from an older generation. Hodpox Ap Dzofx Adwong - Electrical control cabinet with operating system. Gubisch Grimme Multi-blade Saw Cross-cut multi-rip saw Lamella multi-blade saw Cross-cut circular saw with two double shafts, vertical and horizontal execution. Suitable for cutting battens, strips, slats, and for separation cuts with a narrow kerf. Max. cutting height: 200 mm. Max. cutting width: 200 mm. Clamping sleeves 150 / 160 mm. Horizontal saws: 2 x 22 kW. Vertical saws: 2 x 30 kW. Feed frequency controlled 0 – 40 m/min. 8 driven roller pairs. Pneumatically adjustable roller pressure. Electric height and width adjustment. Electrical control cabinet with controls. Saw bushings and tools. Sound-proofed operator cabin. The machine is in excellent condition and was only sporadically used. No visible wear on the infeed rollers. Not in use for the past 12 years. Mechanization: Infeed centering roller conveyor with adjustable feed gearbox. Outfeed roller conveyor with integrated transverse discharge conveyor. Both with adjustable feed gearbox. Mechanization is of an older type. Electrical cabinet with control system.

Condition: ready for operation (used), Year of construction: 1996, Tilting Spindle Moulder Table Moulder Woodworking Moulder Joiner’s Moulder CASOLIN Model: F45 Year of manufacture: 1996 5 adjustable spindle speeds: 3000/4500/6000/8000/10,000 rpm Table dimensions approx. 130 x 90 cm Milling fence with fine adjustment Electric height adjustment with digital display Electric tilting from -5° to +45° with digital angle display Spindle diameter: 30 mm Matching power feeders can be found in my other listings. Condition as shown in the pictures, please also refer to the item description. Parts may also be collected by the buyer. All dimensions are approximate. All information is provided to the best of our knowledge, but without guarantee. Subject to prior sale. Items can be collected in person or shipped at the buyer’s expense. Shipping costs are indicative and may vary depending on distance and unloading options. Hsdpfx Adjx Dmnaowong The listed sale price is a net amount plus VAT. An invoice with VAT shown will be provided. Warranty terms: Due to wear and tear on used parts, items are generally sold as defective – for parts donors only – and only to businesses. By placing a bid, the buyer accepts this as the basis for the purchase agreement.

Condition: used, with 7 spindles used Machine inspected, test run performed Adjustments checked, lubricated Manufacturer: Hemag Hnjdpfx Adowrtldjwjg Type: Milling Rotor 190 Machine No.: 703134 Motor: 7.5 kW Mechanical brake 3 speed stages Forward and reverse operation Spindle: 7 units Spindle diameter: 30 mm Max. tool diameter with fence: 210 mm Max. tool diameter in machine: 140 mm Table size: 1300 mm x 1050 mm Extendable frame support Milling fence with fine adjustment Extraction connection D 120 mm Required space approx. 1300 mm x 1100 mm x 1200 mm Weight approx. 1100 kg Total connected load: 7.5 kW Location: 97447 Gerolzhofen, free loaded, unpacked Handover in current condition as inspected, without guarantee or warranty.

Condition: good (used), functionality: fully functional, working width: 260 mm, planing height: 160 mm, spindle diameter: 50 mm, planing width: 260 mm, working height: 160 mm, power of feed motor: 4,000 W, spindle speed (max.): 7,000 rpm, spindle speed (min.): 7,000 rpm, height adjustment type: electric, type of input current: three-phase, number of spindles: 5, power: 39 kW (53.03 HP), Equipment: cabin, motor brake, Weinig Unimat 1000 with grooved table Hedpfox Dzc Sox Adwsng Working width: 260 mm Working height: 160 mm 5 spindles Spindle diameter: 50 mm Spindle arrangement: 1-Bottom (7.5 kW) 7000 rpm 2-Right (7.5 kW) 7000 rpm 3-Left (7.5 kW) 7000 rpm 4-Top (7.5 kW) 7000 rpm 5-Bottom (5.5 kW) 7000 rpm Feed: 4 kW / 6–36 m/min One driven roller in the table at the outfeed.

Condition: ready for operation (used), Year of construction: 1989, functionality: fully functional, Planing size 220 x 150 mm, grooved bed, electric height and width adjustment Machine in operation, works. Hsdpfou Sntzox Adweng CHF 14500.— excl. VAT From site 4102 Frenkendorf Switzerland

Condition: good (used), Year of construction: 1988, WACO HM 200 moulder with splitting unit in the end of machine. Max. working width/high : 200 x 120 mm Spindle diameter : 45 mm Max. infeed speed : 60 mtr/min Moulding heads with 6 knives Spindle configuration : 1. buttom 11 Kw 2. Top 11 Kw 3. Right 7,5 Kw Hnedpsur Nk Hsfx Adwsg 4. Left : 7,5 Kw Splitting unit : 5. Right saw 37,5 Kw 6 Left saw 37,5 Kw Lots of extra tools, heads + sawblade boxes

Condition: excellent (used), Table milling machine SCHNEIDER Type SK 2/4 II with feed Holz-Her Hnsdpfxogk Ui Ee Adwog With sliding table

Condition: used, Year of construction: 1966, Swivelling spindle: No Height adjustment: Handwheel Swivel adjustment: - Cutter jaw adjustment: manual Height display: Scale Swivel angle display: - Hodpfexu Dhlex Adwsng Fence indicator: Scale Spindle diameter: 30 mm Speeds: 2800, 4500, 6000, 5600, 8000, 12000 rpm Motor power: 4 / 5.5 kW Motor brake: Manual Extraction connection: 2 x 120 mm Machine length: 2000 mm Machine depth: 900 mm Weight: 700 kg

Condition: excellent (used), set of tools, planer heads for moulder Hnodpfx Aswbwkcsdwsg

Condition: new, Year of construction: 2021, V-hold 4-sided, 5-spindle planer, model VH-M 521 - width from 25 to 230 mm - height from 8 to 160 mm 1st from the bottom - 7.5 kW 2nd from the right -7.5 kW 3rd from the left -7.5 kW 4. from the top -11 kW 5. from the bottom - 7.5 kW - 5.5 kW feed from 6 to 36 m / min - revolutions 6500 / min - diameter of the spindles 40 mm - feed for short, opposite the right spindle - pressure in front of and behind the upper spindle. - manual table lubrication pump - machine weight 3100 kg In stock Hnedjhq Rp Hspfx Adwsg

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, working width: 230 mm, spindle diameter: 40 mm, working height: 120 mm, number of spindles: 6, Four-side planer and moulder Manufactured by Weinig Type: Hydromat 23C Hjdpfxjx E Ak As Adweng Year of manufacture: 2005 Working width: 230 mm Working height: 120 mm 6 spindles Spindle arrangement: bottom/right/left/top/top/bottom Spindle motors: 7.5 kW each Automatic table lubrication Automatic Memory System control system Spindle diameter: 40 mm Spindles with bearings on both sides The last two heads are equipped with jointers

Condition: ready for operation (used), Guilliet KXR III with mobile spindle for variable widths + Carpentry package final dimension 240x160mm + Infeed before planing + Reinforced motors Number of spindles: 4 pcs, 40mm diameter Maximum profiling tool diameter, left/right: 180mm Vertical spindle adjustment: 40mm Final width: 240 mm Final height: 160 mm Planer table length: 2500 mm Feed speed: continuously adjustable 4.5–27 m/min Reinforced motor power: Planer: 7.5 kW Hnodpfjvq Rnhjx Adwog Left/right spindle: 11 kW, 1 motor Thicknessing: 9 kW Feed: 2.2 kW Dimensions approx. (L/W/H): 3160 x 1420 x 1440 mm Machine weight approx. 1700 kg Available immediately from site, as currently installed Optional inspection and reconditioning available at extra cost

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, working width: 230 mm, planing height: 120 mm, spindle diameter: 50 mm, planing width: 230 mm, working height: 120 mm, power of feed motor: 37,000 W, spindle speed (max.): 6,000 rpm, spindle speed (min.): 3,000 rpm, height adjustment type: electric, planer shaft diameter: 50 mm, type of input current: three-phase, number of spindles: 10, power: 574 kW (780.42 HP), input frequency: 50 Hz, Equipment: cabin, motor brake, rotational speed infinitely variable, Weinig Powermat 2500 10 Spindles, Working width: 230 mm, Working height: 120 mm, Spindle diameter: 50 mm, Feed: 37 kW / 12–120 m/min, Hnodpfxexz Thbo Adweg Spindle configuration: 1- Bottom (22 kW) – with hydraulic clamping and fully automatic straight jointer 2- Right (11 kW) 3- Left (11 kW) 4- Top (37 kW) – with fully automatic straight jointer 5- Bottom (18.5 kW) – with hydraulic clamping and fully automatic straight jointer 6- Top (18.5 kW) – with hydraulic clamping and fully automatic straight jointer 7- Top (53 kW) – with hydraulic clamping, speed 3,000–6,000 rpm 8- Bottom (53 kW) – with hydraulic clamping, speed 3,000–6,000 rpm 9- Top (53 kW) – with hydraulic clamping, speed 3,000–6,000 rpm 10- Bottom (53 kW) – with hydraulic clamping, speed 3,000–6,000 rpm Short infeed table, 1.3 meters (4 rollers), with 2 powered rollers above the table and 2 powered rollers in the table (both table rollers can be lifted). Table height adjustment with electronic digital readout. Incl. 2 heavy-duty side pressure rollers, 140 mm diameter, pneumatically actuated. Base supports, height 320 mm, for a table height of 1190 mm. Marathon POWER Coating for machine table, fences, and guide rails (excluding infeed table and special table surfaces). Special coating to protect table plates, fences, and guide rails from excessive wear. Recommended for processing abrasive materials (e.g., tropical woods, MDF, chipboard, plastics, metals). Automatic lubricant pump for table resin removal. Powered rollers in the machine table, hardened. Heavy-duty steel pressure rollers from above, diameter 120 mm, located in the area of the right and left spindle.

Condition: as good as new (ex-display), Year of construction: 2025, Spindle swivels: No Height adjustment: Handwheel Pivot adjustment: - Milling jaw adjustment: manual height indication: mech. counter Swivel angle display: - Milling stop indicator: mech. counter Hnsdpfogzlpkex Adwsg Milling spindle diameter: 30 mm speeds: 3000, 4500, 6000, 7000, 10000 Motor power: 7 kW Motor brake: Yes, automatic Suction connection: 2 x 120mm Machine length: 2599mm Machine depth: 900mm Weight: 655kg

Condition: used, Year of construction: 1990, Weinig Profimat 22N Year of manufacture: 1990 Number of spindles: 6 pcs Planing width: 220 mm Planing height: 120 mm Spindle diameter: 40 mm Infeed table length: 2,000 mm Drive: Cardan shaft Hnodpfox Dbbnsx Adwsg Spindle arrangement: Bottom Right Left Top Bottom Universal

Condition: excellent (used), Felder F 700 M Shaper (Spindle Moulder) Hnjdpoxyfrpefx Adweg Electric spindle height adjustment and manual angle adjustment from 0 to +45 degrees Interchangeable 30 mm spindle Long tables: 215 cm 4 spindle speeds 5.5 kW motor Spindle lock Brake Very good condition, machine fully checked and ready for operation.

Condition: excellent (used), Panhans 240A spindle moulder (bottom spindle) Hsdpsxg Iz Hefx Adweng Spindle diameter: 30 mm Spindle length: 130 mm Variable spindle speed: 3000/4500/6000/9000 rpm Electronic spindle height adjustment Electronic fence adjustment Electronic angle adjustment SCM 4-roller power feed

Condition: good (used), Year of construction: 2004, Weinig Unimat 23 EL Year of manufacture: 2004 Working width: 230 mm, Working height: 120 mm 1. Bottom spindle with 7.5 kW motor and spindle brake 2. Right spindle with separate motor, 7.5 kW and spindle brake Speed: 8,000 rpm with high-performance ball bearings, NC-axis with frequency inverter, axial stops milled to 35 mm height 3. Left spindle with separate motor, 7.5 kW, speed 8,000 rpm with high-performance ball bearings, NC-axis with frequency inverter, radial pneumatic pressure guide left for varying workpiece widths up to 200 mm 4. Top spindle with 7.5 kW motor and spindle brake, speed 8,000 rpm with high-performance ball bearings, NC-axis radial Pneumatic axial control, adjustment range 40 mm, glazing bead ejection, pneumatically cycled. - Infeed system with 4 kW motor and infeed brake - Short piece package - UC-Matic package consisting of: Hjdpswyulusfx Adwjng PLC control, central motor start, parts monitoring, operator terminal, free-standing control cabinet, free-standing operating panel, magnetic interlock for safety cover - Enhanced sound insulation - Automatic planing and feeding system for different workpiece lengths and widths Workpiece dimensions Length: 400 – 3,500 mm (4,000 mm) Width: 40 – 200 mm Thickness: 20 – 100 mm Powered conveyor belt Belt width 250 mm, conveying length 4,500 mm, additional photoelectric sensor for signal transmitter Weinig Hydro Finish Planing Machine Uniplan 23 Year of manufacture: 2004 Working width: 230 mm, Working height: 120 mm 1. Bottom spindle with 7.5 kW motor and spindle brake, speed 7,200 rpm 2. Top spindle with 7.5 kW motor and spindle brake, speed 7,200 rpm, NC-axis radial - First feed roller cycled with photocells - NC-axis for separate feed height adjustment - Improved sound insulation - UC-Matic package - 2 hydro straight cutter blocks 501 with HSS strip planer knives 30 mm x 3 mm, max. 9,000 rpm, dimensions 163 mm x 230 mm x 50 mm, Z=4

Condition: good (used), Year of construction: 1998, functionality: fully functional, Four-side planer Weinig Hydromat 23, finger jointing machine 8 spindles, Working width: 230 mm, Working height: 160 mm, Spindle diameter: 50 mm, Feed: 7.5 kW / 6–36 m/min, Spindle arrangement: 1-Bottom (7.5 kW) 2-Right (7.5 kW) 3-Left (7.5 kW) with profile jointer 4-Right (7.5 kW) with profile jointer 5-Top (7.5 kW) with hydraulic clamping 6-Bottom (30 kW) with hydraulic clamping 7-Top (7.5 kW) with hydraulic clamping and straight jointer 8-Bottom (7.5 kW) with hydraulic clamping and straight jointer. Hard coating. Two powered rollers in the table. Hnsdpfxjxqh E Hs Adweg

Condition: good (used), Year of construction: 1979, Spindle diameter: 30 mm Speeds: 2,800 – 4,500 – 6,500 – 10,000 rpm Motor: 10 HP Table dimensions: 1,100 x 1,000 mm Extraction port diameter: 2 x 120 mm Tilting range: -5 to +45 degrees Max. spindle stroke: 130 mm Various tools available at an additional cost Includes 4-roller feed unit HOLZHER Type 1112 Each with 4 feed speeds forward and reverse Custom-built table extension right & left Hodpfx Ajxran Nsdwsng With tools as shown in the picture

Condition: used, Year of construction: 1981, Weinig U22N Number of spindles: 7 pcs Planing width: 220 mm Planing height: 120 mm Infeed table length: 2,500 mm Driven rollers in table: 2 pcs Rollers in table (not driven): 3 pcs Feed motor: 5.5 kW Counter bearing: spindles 6 and 7 Jointer: spindle 6 Spindle configuration Bottom 5.5 kW Right 3 kW Left 5.5 kW Right 7.5 kW Hsdpfxex Da Rbe Adwsng Top 5.5 kW Top 4 kW Bottom 4 kW

Condition: excellent (used), Four-sided planer scm sintex nte Planing width max 180 mm Planing height max 105 mm 4 spindles Bottom + top 7.5 kw Right + left 7.5 kw Electric height and width adjustments Worktop lubrication pump Headset Spindle speed 6000 rpm Hnsdevzr Drepfx Adwog Spindle bore diameter 35 mm Weight 900 kg European CE certificate Technical documentation Very good condition

Condition: used, Year of construction: 2001, functionality: fully functional, Elektra Beckum bench milling machine type TF 904, 2.8 RDNB, year of manufacture 2001, milling fence with fine adjustment, 2.8 kW, 30 mm spindle, tiltable Hodpfoxf E N Eox Adwong

Condition: good (used), Year of construction: 1993, functionality: fully functional, working width: 230 mm, planing height: 170 mm, spindle diameter: 50 mm, planing width: 230 mm, working height: 170 mm, power of feed motor: 7,500 W, height adjustment type: electric, planer shaft diameter: 50 mm, number of spindles: 8, input frequency: 50 Hz, Equipment: cabin, motor brake, 8 spindles, Working width: 230 mm, working height: 180 mm, spindle diameter: 50 mm, feed rate: 7.5 kW / 6 - 36 m/min, Spindle arrangement: 1-bottom (7.5 kW) - scoring spindle 2-bottom (7.5 kW) 3-Right (11 kW) 4-Left ( 11 kW) 5-Top (11.0 kW) 6-Bottom (22.0 kW) 7-Bottom (7.5 kW) 8-Top (7.5 kW) Hodsr Axwnepfx Adwjng 8 driven rollers in the table