Used Four Side for sale (2,00,000)

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: 00049781, workpiece diameter (max.): 50 mm, spindle diameter: 69 mm, spindle speed (max.): 5,000 rpm, stroke length: 130 mm, roll spacing: 255 mm, TECHNICAL DETAILS Contact surface: 180 mm Workpiece diameter: 4 - 50 mm Rolling pressure (infinitely variable): 0-200 kN Feed (infinitely variable): 0-50 mm/s Rolling cycles per minute: 0-86 Rolling spindles Rolling spindle diameter: 69.85 mm Distance between rolling spindles: 125 - 255 mm Spindle mounting length: 160 mm Traverse of the rolling spindle slide: 130 mm Rolling spindle speed: 3000-5000 rpm Rolling tool diameter: 130 - 200 mm Machine bed height: 800 mm Height of rolling spindle above machine bed: 160 mm MACHINE DETAILS Fsdpfx Ajxbfwzoabepn Control system: SIEMENS SIMATIC C7 Voltage: 400 V, 50 Hz Dimensions & Weight Machine height: 1,600 mm Weight: 2,400 kg

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2005, machine/vehicle number: 010, laser power: 350 W, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Laser FLS 352 N Laser type: Pulsed Nd:YAG solid-state laser Average power: 350 W Pulse energy: 70 J MACHINE DETAILS Electrical data Supply voltage: 380/415 V AC Phases: 3 Frequency: 50 Hz Full load current: 2.2 A Fpsdpsxf H Aajfx Aabon MCCB current: 16 A Maximum motor current: 8.1 A

Condition: ready for operation (used), Year of construction: 2022, operating hours: 6,490 h, functionality: fully functional, travel distance X-axis: 650 mm, travel distance Y-axis: 950 mm, travel distance Z-axis: 700 mm, rotational speed (max.): 15,000 rpm, number of slots in tool magazine: 123, TECHNICAL DETAILS Control: CELOS control with Siemens 840D sl Operate X travel: 650 mm Y travel: 950 mm Z travel: 700 mm Spindle Speed: up to 15,000 rpm Interface: HSK-A63 Power: 21 kW (40% duty cycle), 16 kW (100% duty cycle) Torque: 111 Nm (40% duty cycle), 85 Nm (100% duty cycle) Tool clamping force: 25 kN Worktable NC swivel table, max. permissible load: 600 kg Workpiece dimensions Max. interfering contour diameter: 630 mm Height: 700 mm Tool magazine Type: Wheel magazine Capacity: 123 spaces Permissible tool weight: 15 kg Permissible total weight per wheel: 300 kg Cooling system Coolant tank: 1,300 L Drive motor A-axis and B/C-axis liquid-cooled B/C-axis gearbox liquid-cooled Measuring systems Renishaw infrared probe, tool breakage monitoring Tool measurement in working area Blum laser, tool length and diameter measurement Linear axis measuring systems direct, absolute, resolution 0.00001 mm (10 nm) Feed rates Max. feed rate X-Y-Z: 60,000 mm/min Rapid traverse X-Y-Z: 60 m/min Accuracy Machine accuracy X-Y-Z: A Fpodpsxamm Iefx Aaben

Condition: ready for operation (used), Year of construction: 2021, operating hours: 2,256 h, functionality: fully functional, travel distance X-axis: 710 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 350 mm, table load: 250 kg, spindle speed (max.): 12,000 rpm, TECHNICAL DETAILS Travel X-axis: 710 mm Travel Y-axis: 400 mm Travel Z-axis: 350 mm Table dimensions: 850 x 400 mm Max. table load: 250 kg Table height from floor: 850 mm Spindle speed: 12,000 rpm Spindle taper: BBT 30 Main spindle power: 13 kW Rapid traverse (X, Y, Z): 60 m/min Max. tool diameter: 68 mm Max. tool length: 200 mm Max. tool weight: 3.0 kg Tool change time: 0.9 s Max. number of tool stations: 20 MACHINE DETAILS Control: FANUC 0i-MF Dimensions (L x W x H): 2,100 x 2,600 x 2,700 mm Machine weight: 3,150 kg Operating hours Machining time: 2,256 h Run time: 3,557 h Control on: 24,690 h EQUIPMENT Fodpfx Aaexlf Nrobspn Automatic door Keyarrow chip conveyor

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2013, operating hours: 94,936 h, controller manufacturer: Siemens SINUMERIK 80 D, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,300 mm, travel distance Z-axis: 600 mm, feed rate X-axis: 100 m/min, TECHNICAL DETAILS Working Area X-axis: 3,000 mm Y-axis: 1,300 mm Z-axis: 600 mm B-axis: ±135° C-axis: n × 360° Speeds X / Y / Z axis: 100 m/min B / C axis: 540 °/s Acceleration Simultaneous: 17.3 m/s² X / Y / Z axis: 10 m/s² B / C axis: 200 | 100 rad/s² Maximum Positioning Accuracy Linear axes X / Y / Z: 0.03 mm Rotary axes B / C: 0.005° Maximum Positioning Deviation Linear axes X / Y / Z: 0.08 mm Rotary axes B / C: 0.015° MACHINE DETAILS Laser type: Solid-state laser TruDisk 3001 Laser output: 3,000 W Cutting gas: Nitrogen Control: Siemens SINUMERIK 80 D Operating Hours Fedjxlctzepfx Aabopn "Laser On" hours: 94,936 h Operating hours: 99,293 h EQUIPMENT Magnetic coupling Dynamic cutting optics with f = 150 mm FocusLine FastLine Cell ObserveLine Rotary changer D = 4,000 mm including safety backing Scrap conveyor 4× configurable control interface Valve terminal for 8 pneumatic clamps per side 2× load status indicator for rotary changer Extended compressed air supply on equipment panel including vacuum ejectors Cutting gas: compressed air Renishaw touch probe Measuring head (without probe) Measurement data processing 3× horizontal fixture interface Extraction ducting Protective enclosure for rotary changer including safety device, 1 window and column for control panel Status signal light (top & bottom) Video monitoring with camera Monitor mount Special installation Cooling unit KLH

Year of construction: 2007, operating hours: 300 h, condition: ready for operation (used), functionality: fully functional, overall weight: 1,300 kg, machine/vehicle number: PSW-L, Equipment: documentation/manual, No minimum price – guaranteed sale to the highest bidder! Tool holder with only 300 operating hours! MACHINE DETAILS Electrical Data Voltage: 3 × 400 V Frequency: 50/60 Hz Rated Current: 1.8 A Power: 710 VA Pneumatics Compressed air supply: 5 bar / 200 l/min Fsdpfxexliy Uj Aabepn Weight: 1,300 kg Operating hours: 300 h EQUIPMENT 3 pallets Documentation

Condition: good (used), Year of construction: 2008, functionality: fully functional, turning length: 1,520 mm, turning diameter: 540 mm, spindle speed (max.): 10,000 rpm, travel distance X-axis: 550 mm, travel distance Y-axis: 160 mm, travel distance Z-axis: 1,595 mm, rotational speed (max.): 3,500 rpm, number of slots in tool magazine: 40, swivel angle B-axis (min.): -120 °, swivel angle B-axis (max.): 120 °, TECHNICAL DETAILS CNC control: Fanuc 18iT-B Turning length: 1,520 mm Swing diameter: Ø 540 mm Turning diameter over bed: Ø 750 mm Turning diameter over cross slide: Ø 600 mm Bar capacity: 76 mm Turning-milling spindle X-axis travel: 555 mm Y-axis travel: ±80 mm (160 mm total) Z-axis travel: 1,595 mm B-axis indexing: ±120° (240° total) Tool system: Capto C6 Max. tool diameter (continuous): 90 mm Max. tool diameter (without adjacent tools): 120 mm Max. tool length: 300 mm Max. tool weight: 8 kg Tool change time (tool to tool): 1.5 s Number of tools in the magazine: 40 Max. spindle speed: 10,000 rpm Milling spindle motor power (30 min / continuous operation): 15 / 11 kW Lower turret X-axis travel: 185 mm Y-axis travel: 1,640 mm Number of tool positions: 12 Max. speed of driven tools: 4,000 rpm Main spindle Max. spindle speed: 3,500 rpm Chuck size: Ø250 mm Spindle mount: ASA A2-8 Spindle bore: Ø86 mm Draw tube bore: Ø77 mm C-axis – max. indexing angle: 0.001° Main spindle motor power (30 min / continuous operation): 26 / 22 kW Counter spindle Max. spindle speed: 3,500 rpm Counter spindle travel: 1,565 mm Travels and rapid traverses X1 axis travel: 555 mm X2 axis travel: 185 mm Z1 axis travel: 1,595 mm Z2 axis travel: 1,640 mm Y axis travel: ±80 mm (160 mm total) A axis travel: 1,565 mm C1, C2 axis travel: 360° (0.001° resolution) B axis travel: ±120° (240° total) B axis coupling angle: 15° X1, Z1, Z2 axis: 24 m/min Y axis: 16 m/min A axis: 24 m/min C1, C2 axis: 200 rpm B axis: 27 rpm MACHINE DETAILS Weight: 15.5 t Connected load: 93.92 kVA Dimensions: 5,550 x 2,560 x 2,645 mm EQUIPMENT - Fanuc 18iT-B CNC control - Capto C6 tool system - 40-position tool magazine Fedpfxsxf Hrnj Aabjpn - Lower turret with 12 tool positions

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, travel distance X-axis: 3,680 mm, travel distance Y-axis: 1,260 mm, travel distance Z-axis: 150 mm, TECHNICAL DETAILS Working area: 3,680 x 1,260 x 150 mm Milling motor: 1 unit, 8.5 kW (11.5 HP) Tool changer: 1 automatic rotary magazine with 12 positions Drill beam: 18 vertical, 8 horizontal drills, and 1 "X" saw drill Software: DXF compatible Safety standard: BUMPER protection, CE standards Weight: 3,000 kg Note: The machine has a software issue and does not include a pump. The estimated cost for correction is approximately €3,000 each. Fpsdpfx Aaoxg Izaebsn

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2008, laser power: 4,000 W, table length: 1,500 mm, table width: 3,000 mm, Equipment: cooling unit, No minimum price – guaranteed sale to the highest bidder! The machine was serviced in 2022 by an Amada specialist. The service protocol can be found attached to this listing! TECHNICAL DETAILS Laser power: 4 kW Table width: 3,000 mm Table length: 1,500 mm EQUIPMENT Ridel chiller Donaldson extraction unit 2 exchange tables Fpedpfx Aaoxgg Irsbjn

Condition: ready for operation (used), Year of construction: 2015, functionality: fully functional, travel distance X-axis: 760 mm, travel distance Y-axis: 530 mm, travel distance Z-axis: 560 mm, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 30, TECHNICAL DETAILS Travels X-axis: 760 mm Y-axis: 530 mm Fodoxlf D Nepfx Aabjpn Z-axis: 560 mm Speeds Rapid traverse: 40 m/min Spindle Speed: max. 12,000 rpm Power: max. 25 kW Tool magazine and table Tool magazine positions: 30 Table size (L × W): 900 × 500 mm EQUIPMENT Including chip conveyor Including slant bed filtration system Including zero-point clamping system Including 4th axis Rotamatik 120 New Däublin

Condition: ready for operation (used), functionality: fully functional, workpiece length (max.): 7,500 mm, workpiece diameter (max.): 1,500 mm, No minimum price – guaranteed sale to the highest bidder! Auction of a complete sawmill including sharpening workshop! TECHNICAL DETAILS Max. log diameter: 1.5 m Max. log length: 7.5 m Automatic separator: RG SX Resaw: 1,300 RG Trimmer: NO/5 single-blade EQUIPMENT Primultini model 460 sharpening machine for bandsaw blades Primultini bandsaw blade beveling machine Vollmer sharpening machine Bandsaw blade end-welding device Additional sharpening machine Many saws Fpsdpexgg Sksfx Aabon

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, center height: 225 mm, controller model: Fanuc 16T, TECHNICAL DETAILS Centre height: 225 mm Fpodjxlix Dopfx Aabjn MACHINE DETAILS Control: Fanuc 16T

Condition: ready for operation (used), Year of construction: 2007, operating hours: 32,510 h, functionality: fully functional, machine/vehicle number: 11670000823, travel distance X-axis: 800 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 800 mm, rotational speed (max.): 10,000 rpm, number of slots in tool magazine: 180, TECHNICAL DETAILS X-axis travel: 800 mm Y-axis travel: 800 mm Z-axis travel: 800 mm Drive: Variable-speed asynchronous motor with liquid cooling Control: Sinumerik 840D powerline Work spindle Tool holder: HSK-A63, hydraulic-mechanical tool clamping Spindle speed: 0 – 10,000 rpm, continuously programmable Feed Drive: AC brake motors on the X, Y, Z, and B axes Feed range on the X, Y, and Z axes: 0 – 60,000 mm/min Rapid traverse on the X, Y, and Z axes: 80 m/min Measuring system Resolution on the X, Y, and Z axes: 0.001 mm Position tolerance on the X, Y, and Z-axis: 0.008 mm Pallet Number: 2 Size: 630 × 630 mm Hole pattern: 108 × bushing Ø 16.02 H6 Centering bushing: Ø 16.02 H6, 38.5 mm deep NC rotary table Max. tabletop rotation: 30 rpm Tabletop holding torque at 40% duty cycle: 5,000 Nm Tabletop holding torque at 100% duty cycle: 3,250 Nm Workpiece weight Per pallet: max. 800 kg Difference with different loads: max. 800 kg Tool magazine Type: Vertical chain magazine HSK-A63 Positions: 180 Tool changing system: Double gripper Max. tool diameter standard: 80 mm Max. tool diameter with free adjacent positions: 160 mm Max. Tool length from spindle nose: 550 mm Max. tool weight: 12 kg Fpedpfxoxf Htxs Aabon Max. magazine load: 630 kg MACHINE DETAILS Space requirement: 6.0 x 6.0 m Height: 3.2 m Weight: 18 t Power requirement: 71 kVA Machine dimensions: approx. 4.7 x 5.6 x 3.2 m EQUIPMENT - Internal coolant supply - Chip conveyor - Belt filter system - Cooling unit - Rotoclear - Tool breakage detection (laser) - Mist separator - Measuring probe - Handheld control unit - Flushing gun - Blow-air cooling system - 4-color signal lamp - Dynamic package

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, workpiece height (max.): 60 mm, edge thickness (max.): 20 mm, workpiece width (max.): 60 mm, The machine has been serviced and is in excellent condition. It is immediately ready for operation! TECHNICAL DETAILS - Edge thickness (glued): max. 20 mm - Maximum gluing height: 60 mm - Maximum roll material thickness: 3 mm - Piece width: min. 60 mm - Maximum feed rate: up to 25 m/min - Feed: continuous - Electric height adjustment: available - Pressure system: upper belt pressure - Preheating zone: available - Granulate glue system: with pre-fabricated container - Glue pot: interchangeable/variable - Spray unit: available - Pre-milling unit: available - Trimming unit: with 2 motors - Milling stations: flush/radial/chamfer, 1 available - Corner rounding unit: with 2 motors - Edge scraper: profile and planer - Buffing unit: available - Strip magazine: available - Units: synchronized units with NC axis/axes - Machine version: left hand side - Quick-change units: available MACHINE DETAILS - Remote control: PowerControl PC 22 - Weight: 5,000 kg - Machine length: 7,845 mm - Standards: CE requirements EQUIPMENT - Special equipment: with nesting - New chains - HOMAG feed device with 2 rollers - HOMAG A 20 glue unit - HOMAG HL 84 - HOMAG FK 11 - HOMAG PN 10 profile pull scrape unit - HOMAG FA 11 finishing unit Fjdpfxsxg Ix So Aabspn

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, turning diameter: 320 mm, travel distance X-axis: 240 mm, travel distance Y-axis: 100 mm, travel distance Z-axis: 495 mm, bar passage: 51 mm, Lathe with LNS bar feeder & additional equipment! The machine has been completely inspected and geometrically measured by the seller. It is ready for immediate use! TECHNICAL DETAILS Travel X-axis: 240 mm Travel Y-axis: 100 mm Travel Z-axis: 495 mm Max. machining diameter: 320 mm Bar capacity: 51 mm Main spindle speed: 5,000 rpm Main spindle motor power: 22 kW Sub spindle speed: 5,000 rpm Sub spindle motor power: 22 kW MACHINE DETAILS Control: Mazatrol640T EQUIPMENT 2 x 12-station turrets with driven tools CNC option package EIA / ISO programming Tool eye Partition wall Automatic parts catcher with conveyor belt LNS short bar loader Quick Load Servo III Fpsdpfxsxg D Amj Aabsn High-pressure coolant 10 bar Chip conveyor Mayfran ConSep 2000 II

Condition: ready for operation (used), Year of construction: 2022, operating hours: 674 h, functionality: fully functional, spindle speed (max.): 6,000 rpm, travel distance X-axis: 140 mm, travel distance Y-axis: 70 mm, travel distance Z-axis: 235 mm, bar diameter (max.): 42 mm, TECHNICAL DETAILS MAIN SPINDLE Max. bar diameter: 42 mm Travel: 100 mm Spindle speed: 6,000 rpm Spindle drive power: 7.5/5.5 kW Minimum C-axis resolution: 0.001 degrees SUB SPINDLE Max. bar diameter: 34 mm Spindle speed: 5,000 rpm Spindle drive power: 5.5/3.7 kW Minimum C-axis resolution: 0.001 degrees Number of turrets: 2 UPPER TURRET Number of positions: 8 Travel X: 140 mm Travel Z: 235 mm Travel Y: 70 (+/-35) mm Driven tools speed: 5,000 rpm Driven tools power: 1.0 kW LOWER TURRET Number of positions: 6 Travel X/Z: 140 / 310 mm Number of spindles: 2 MACHINE DETAILS Fpodpfx Aexlfu Ujabjn Dimensions & Weight Dimensions (L x W x H): 2,220 x 1,460 x 1,700 mm Machine weight: 3,100 kg ELECTRICAL SUPPLY Total connected load: 30 kVA Operating Hours Machining hours: 674 h Control on hours: 4,953 h

Condition: ready for operation (used), functionality: fully functional, overall weight: 24,400 kg, operation weight: 23,600 kg, Year of construction: 2007, operating hours: 9,500 h, cutting height (max.): 10,850 mm, arm reach: 10,010 mm, machine/vehicle number: HCMBFH00T00201484, TECHNICAL DETAILS Working Ranges Max. reach: 10,010 mm Max. reach (on the ground): 9,830 mm Max. digging depth: 6,890 mm Max. digging depth (8' level): 6,650 mm Max. cutting height: 10,850 mm Max. dumping height: 8,050 mm Fpedpfx Aaexhdx Rsbjn Min. swing radius: 2,950 mm Max. vertical wall: 5,600 mm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 9,070 mm x 2,990 mm x 2,950 mm Total weight: 24,400 kg Operating weight: 23,600 kg Rear swing radius: 1,680 mm Rear length: 1,680 mm Overall upper carriage width: 2,890 mm Overall height over cab: 2,950 mm Minimum ground clearance: 450 mm Track gauge: 2,390 mm Shoe width: 600 mm Undercarriage width: 2,990 mm Engine: Isuzu AI 4 HK 1 X Power: 122 kW / 164 HP Number of seats: 1 Operating hours: approx. 9,500 EQUIPMENT Cabin Standard bucket MONO-BOOM

Condition: ready for operation (used), Year of construction: 1991, functionality: fully functional, machine/vehicle number: 26BB2444, No minimum price – guaranteed sale to the highest bidder! Fodpfxsxliwyj Aabjpn MACHINE DETAILS Electrical Data Connection: 380 V / 50 Hz Rated power: 10 kVA Fuse rating: 25 A Control voltage (AC): 220 VAC Control voltage (DC): 24 VDC EQUIPMENT Coolant tank

Condition: ready for operation (used), Year of construction: 2019, functionality: fully functional, machine/vehicle number: 1000030194, table length: 4,500 mm, table width: 3,000 mm, TECHNICAL DETAILS Table dimensions: 3000 x 4500 mm MACHINE DETAILS Supply voltage: 400 VAC Rated current at full load: 5.04 A Number of supply phases: 3 Power: 2.7 kW Frequency: 50 Hz Fjdpfx Aaoxdkxisbspn Note: The machine will be available from 02/12/2025!

Condition: ready for operation (used), Year of construction: 2005, operating hours: 5,000 h, functionality: fully functional, turning length: 750 mm, turning diameter over cross slide: 250 mm, travel distance X-axis: 140 mm, travel distance Y-axis: 40 mm, travel distance Z-axis: 410 mm, TECHNICAL DETAILS Axis Travel X-axis travel: 140 mm Y-axis travel: +/- 40 mm Z-axis travel (1+2): 450 / 410 mm Turning Capacity Turning length: 750 mm Swing diameter over cross slide: 250 mm Turning diameter: 190 mm Distance between centers: 750 mm Maximum bar diameter: 52 mm Spindle Spindle speed (max.): 4,000 rpm Spindle bore: 91 mm Spindle bearing diameter: 95 mm Main spindle speed range: 60 - 6,000 rpm Main spindle drive power: 22 / 18.5 kW Maximum torque: 198 Nm Sub-spindle (B-axis) travel: 525 mm Feeds Feed rate X (1+2): 18,000 mm/min Feed rate Y: 6,000 mm/min Feed rate Z (1+2): 24,000 mm/min Feed rate B: 24,000 mm/min Turret Number of turrets: 2 Number of tool stations: 2 x 16 positions Square shank height: 20 mm Drill shank diameter: 25 mm Fpsdpexgglkjfx Aabon Turret indexing time: 0.2 s Toolholder: VDI 30 Speed range - driven tool stations (max.): 6,000 rpm Drive power - driven tool stations: 5.5 / 3.7 / 2.2 kW Rapid Traverse Rapid traverse X (1+2): 18 m/min Rapid traverse Y: 6 m/min Rapid traverse Z (1+2): 24 m/min Rapid traverse B: 24 m/min Rapid traverse C: 400 rpm MACHINE DETAILS Control: MSX 501 Dimensions & Weight Dimensions: 6500 x 3000 x 2500 mm Machine weight: approx. 5.1 t Total power requirement: 73.9 kVA Operating hours: 5,000 h EQUIPMENT LNS bar feeder

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, spindle speed (max.): 8,000 rpm, bar passage: 32 mm, controller model: Traub TX8i-S, number of slots in tool magazine: 12, Equipment: chip conveyor, TECHNICAL DETAILS Bar capacity: 26 / 32 mm Max. main spindle speed: up to 8,000 rpm Fsdpfx Aasxlfk Njbopn Axes: X1 / Y1 / Z1, C-axis integrated in main spindle Turret: 1 Tool stations: 12 Drive power: 6.7 kW (100% duty cycle) / 10.7 kW (40% duty cycle) Torque: 21 Nm (100% duty cycle) / 32 Nm (40% duty cycle) MACHINE DETAILS Control: Traub TX8i-S Dimensions & Weight Dimensions (L × W × H): approx. 4.4 × 1.4 × 1.7 m Machine weight: approx. 4,000 - 4,200 kg EQUIPMENT Chip conveyor: hinge belt, discharge height approx. 950 mm

Condition: ready for operation (used), Year of construction: 2017, functionality: fully functional, empty load weight: 1,720 kg, operating speed: 10,700 mm/s, roller width: 2,200 mm, TECHNICAL DETAILS Rigid material Workpiece height: max. 50.8 mm Workpiece weight: max. 34 kg/m² Roll material Width: min. 900 mm – max. 2,200 mm Weight: max. 50 kg Diameter: max. 240 mm Maximum print speed: 64.2 m²/h (in express mode) MACHINE DETAILS Dimensions & Weight Fpsdpfx Asxdiyfoabsn Dimensions: 3,080 × 2,500 mm Weight: 1,720 kg Note: The machine heads must be replaced. The seller can offer full service in this regard. The machine will be available from 02.12.2025!

Condition: ready for operation (used), Year of construction: 2023, functionality: fully functional, turning length: 135 mm, spindle speed (max.): 8,000 rpm, bar diameter (max.): 16 mm, counter spindle speed (max.): 6,000 rpm, number of slots in tool magazine: 16, The machine is offered with an Iemca Elite 112/32 bar feeder! TECHNICAL DETAILS Machining Main spindle max. bar diameter: 16 mm Max. machining length without re-gripping: 135 mm Main spindle max. drilling diameter: 6 mm Main spindle max. thread diameter: M6 Sub spindle max. bar diameter: 16 mm Sub spindle max. drilling diameter: 5 mm Sub spindle max. thread diameter: M3 Spindles Main spindle speed: 200–8,000 rpm Sub spindle speed: 200–6,000 rpm Main spindle C-axis indexing: 1° Rapid traverse Rapid traverse X, Y: 21 m/min Rapid traverse Z1, Z2: 15 m/min Tools Driven tool speed: 200–4,500 rpm Max. number of tool stations: 16 Tool holder: 10 × 10 mm MACHINE DETAILS Drive capacity Main spindle: 3.7 / 2.2 kW Sub spindle: 1.0 kW Driven tools: 0.5 kW Coolant pump: 0.25 kW Central lubrication pump: 3 W Electrical connection Operating voltage: 200 V Frequency: 50 Hz Phases: 3 Main transformer input voltage: 400 V Main transformer output voltage: 200 V Connected load: 5.2 kVA Pneumatic connection Compressed air connection: min. 5 bar Compressed air consumption: 44 NL/min Machine data Dimensions: 1,590 × 837 × 1,761 mm Fpodpfx Aajxlffyjben Spindle height (floor to spindle center): approx. 1,000 mm Machine weight: 1,150 kg Control Control type: CNC path control Fanuc 0i-TD Smallest input increment: 0.001 mm Smallest output increment: 0.001 mm (Z) / 0.0005 mm (X) Input modes: incremental and absolute Interface: RS232 Spindle synchronization: main and sub spindle EQUIPMENT Work area lighting Ejection and unloading device Coolant tank and central lubrication Door interlock Parts catcher and workpiece container 5 turning tool holders 10 × 10 mm Coolant system with movable jet arms Power clamping system for main and pick-off spindle

Condition: ready for operation (used), Year of construction: 2016, functionality: fully functional, machine/vehicle number: 50300315, product height (max.): 15 mm, product width (max.): 305 mm, product length (max.): 210 mm, paper weight (min.): 50 g/m², paper weight (max.): 200 g/m², TECHNICAL DETAILS Insert Length: min. 100 mm – max. 210 mm Width: min. 150 mm – max. 305 mm Weight: min. 50 g/m² – max. 200 g/m² Product height: max. 15 mm Envelope Length: min. 105 mm – max. 230 mm Width: min. 162 mm – max. 341 mm Flap width: min. 25 mm – max. 70 mm Speed: max. 15,000 envelopes/h Fpjdpfx Aoxdii Heaben MACHINE DETAILS Printed labels: 798,538 pcs Note: The machine will be available from 02.12.2025!

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 13688, Year of construction: 2012, empty load weight: 4,990 kg, Fully automated, horizontal production line for IGUs and spacer frames! Production capacity of 1200 units per shift! TECHNICAL DETAILS Production capacity: 150 units/h Fpsdpfx Aaexdibpjben MACHINE DETAILS Electrical Data Voltage: 480 VAC Frequency: 50/60 Hz Phases: 3 Maximum motor capacity: 2 A Short-circuit current: 5,000 A Power: 142 kVA Machine weight: 4,990 kg EQUIPMENT GED Intercept Ultra/Thin Spacer Frame Machine i-3 - CE version Warm-edge spacer manufacturing system Production of Intercept ULTRA stainless steel, ThinPlate, or BlackLine Note: The machine is available from 02/12/2025!