Used Frequency for sale (5,715)

Condition: like new (used), functionality: fully functional, Year of construction: 2022, overall weight: 8 kg, /ct2486/ New ebm-papst S3G450-LA45-63 EC axial fan, 450 mm ⌀, 230 V, 350 W, 6000 m³/h, multiple units available Manufacturer: ebm-papst - Model: S3G450-LA45-63 - Power supply: Single-phase, 230 V AC - Frequency: 50/60 Hz - Power input: 350 W - Current consumption: 1.5 A - Rotational speed: 1250 rpm - Airflow: 6000 m³/h - Protection rating: IP54 - Maximum static pressure: 110 Pa - Static efficiency: 42.2% (within the measurement category) - Efficiency class: N = 51.9; required value: N40 - Control: Integrated electronic speed control - Control input: 0–10 V / PWM Bdjdpj Ahn N Aofx Agkoi - Auxiliary voltage output: +15 V - Number of blades: 5 - Conformity markings: CE, EAC - Country of manufacture: Germany

Condition: used, GTI Oil Mist Collector GT 10L, 1000 m³/h, Used machine Manufacturer: Glob Tec Industriemaschinen GmbH (GTI) Type / Model: GT 10L Year of manufacture: 2020 Serial Number: 20200046 Condition: Used, good condition Dimensions and capacity: * Overall dimensions: 1300 x 930 x 830 mm * Flow rate: 1000 m³/h Technical and operating parameters: Bodpfxj Adrtxs Agkjdi * Connected load: 0.5 kW * Voltage: 200 - 277 V * Frequency: 50 / 60 Hz * Max. operating current: 2.5 A * Max. back-up fuse: 16 A

Condition: used, HAUSER S 50 CNC 311 is a CNC jig grinder delivering precision, high accuracy and reliable performance for demanding grinding tasks. 2‑column execution, table 1020×860 mm, X travel 900 mm, Y 600 mm, vertical slide travel 635 mm, spindle‑to‑table clearance 750 mm, passage between columns 950 mm; max grinding diameter 230 mm (360 mm with intermediate plate); taper grinding up to 16°. Key specs: Z stroke 0–170 mm stepless, stroke speed 1–12000 mm/min, stroke frequency 6 Hz, U‑axis fine feed 6 mm, planetary C motion 5–300 t/min, grinding spindle 4500–80000 rpm (air turbine up to 160000 rpm); supply 3×400 V 50 Hz, total power 9 kVA; weight ≈6300 kg; size 3000×2500×2870 mm. Fitted with retrofitted control, set of grinding arbors, grinding motors 45 S/45 ST and C‑axis; refurbished 2016. Achieves tight tolerances; suitable for automotive, watchmaking, machine tools, aerospace and medical sectors. Bdjdpfx Agj Afc Tlekei

Year of construction: 2011, operating hours: 10,500 h, condition: used, machine/vehicle number: ISP17, Used Inspector KRONES Linatronic K735 year 2011 The Used Inspector KRONES Linatronic K735 year 2011 offers a proven and efficient solution for quality control in high-performance bottling lines. The German manufacturer KRONES, a global leader in beverage industry automation, built this model with reliability, precision, and modular construction in mind. As a result, this inspector fits seamlessly into industrial environments that demand high accuracy and operational consistency. Electrical characteristics and technical configuration of the Used Inspector KRONES The Used Inspector KRONES Linatronic K735 year 2011 runs on a three-phase power supply at 400/230 volts, with a 50 Hz frequency and a 13-ampere current draw. Consequently, it aligns with European industrial standards and supports stable operation under demanding conditions. Furthermore, the electrical system includes integrated safety devices that protect the components from overload or malfunction. In addition, the compact and durable enclosure facilitates easy integration into existing production layouts. Year of production and machine hours KRONES produced this unit in 2011. Since then, the machine has logged 10,500 operating hours, which reflects moderate usage for equipment designed for industrial use. Compared to other models with similar functionality, this unit maintains good performance standards. Moreover, the machine structure shows minimal wear, confirming its careful maintenance. Therefore, technicians can expect reliable functionality without immediate need for major refurbishment. The machine is currently operational, specifically until Easter. Then it will be dismantled.  Supported inspection types The Used Inspector KRONES Linatronic K735 year 2011 is equipped with a comprehensive range of inspection functions to ensure the quality and integrity of each bottle. -The system performs bottom inspection to detect chips, cracks, or foreign objects at the base. -The sidewall (walls) inspection uses a rotating mirror and cameras to identify defects such as scratches, cracks, or dirt on the entire lateral surface. Bdodj Adyv Uspfx Agkei -The neck finish and thread inspection ensures that bottle openings are free from damage or deformation that could compromise sealing or capping. -Scuffing inspection checks for surface abrasions that indicate excessive wear. In addition, the machine employs infrared (IR) and high-frequency (HF) technology to detect residual liquid, ensuring the bottles are dry and ready for fill...

Condition: new, functionality: fully functional, power: 22 kW (29.91 HP), fuel type: electric, Year of construction: 2026, • The Fabo Wobbler feeders are designed to feed sticky, wet and large materials comfortably and clean to the crusher with an ellipse-shaped bar and unique motion mechanism. With its self-cleaning structure, it eliminates the problem of obstruction and stone compression. • Work with wet and sticky materials without clogging and jamming. • Adjustable feed rate. • It occupies less space and has smaller height. • It works without dust, vibration and noise. • Low power consumption and maintenance frequency. • Width: 1400 mm • Length: 2500 mm • Motor power: 22 kW • Bar number: 5-9 • Elliptical bar shape • Aperture: 25-150 mm • Feeding size 50-1.500 mm • Chainy drive system • Max. Capacity 200-300 T / s • Capacities calculated according to the specified material density (1.6 tn/m3) Bsdpfx Age Ad Ivcekedi

Condition: new, functionality: fully functional, Year of construction: 2026, control type: CNC control, degree of automation: automatic, actuation type: electric, laser type: fiber laser, laser source manufacturer: Max Photonics, laser power: 3,000 W, laser wavelength: 1,080 nm, sheet thickness steel (max.): 22 mm, sheet thickness stainless steel (max.): 12 mm, sheet thickness aluminum (max.): 12 mm, table width: 1,300 mm, travel distance X-axis: 2,550 mm, travel distance Y-axis: 1,260 mm, travel distance Z-axis: 120 mm, input voltage: 400 V, type of cooling: water, overall weight: 3,500 kg, door opening width: 2,600 mm, door opening height: 1,000 mm, Equipment: CE marking, cabin, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, safety light barrier, New laser cutting machine with 3kW fiber laser Our goal is to offer highly precise, long-term stable, and yet affordable laser machines. Our machines are ideal for workshops and repair shops. A perfectly developed cutting parameter library is included in the scope of delivery, as is first-class service. Please also note our attractive leasing/hire purchase offers. - Machine without automatic exchange table - very space-saving - extremely energy-efficient cutting system - requires only approx. 4 x 4.0 meters of installation space - 3kW laser source from MaxPhotonics (G5) suitable for aluminum - Top quality, arrange a viewing now! Cutting of steel sheet up to 22mm Cutting of stainless steel sheet up to 10mm Cutting of aluminum sheet up to 10mm Cutting of brass sheet up to 6mm - Travel range 1260 x 2550mm (for medium format) - Machine control in German - Safety light curtain for maximum operator protection - Extensive collision protection measures for the cutting head - Large laser protection window for observing the cutting process - 3-gas switching (compressed air, nitrogen, oxygen) - Extensive cutting parameter file - incl. nesting module - very easy to operate - powerful laser cooler - Machine control in German - German service and spare parts supply - powerful laser cooler - Filter extraction system available as an option (5.5kW with frequency converter for pleasantly quiet operation) The following options are also available: - Automatic nozzle changer (optional) - Automatic nozzle centering (optional) - Raw material detection and part nesting via CypVision camera system (optional) Bodpfsxa Ahnjx Agkedi - Import of 3D files (.stp) and unfolding (optional) - Direct import of SolidWork, SolidEdge, Inventor, etc. (optional) - Nesting, calculation, scrap plate management, etc. (optional) - ERP system can be combined with all your other sheet metal processing machines (optional) Leasing or hire purchase is possible via our financing partner. Sales are exclusively to commercial businesses. Delivery / consultation / sales only in Germany / Austria / Switzerland Machine dimensions approx.: Length: 4.0m Height: 2.3m Width: 4.0m Total weight: approx. 3500kg Do you need a different laser power, table shape or table size? No problem. I will gladly create a suitable offer. e.g. 2kW machine from 29,990 euros Are you not sure which laser power is suitable for your application? Of course, I will carry out cutting tests according to your requirements. There are many possibilities here.

Condition: used, functionality: fully functional, For sale: a three-phase electric motor, KSB, powered by WEG, model AL132S-02, with foot mounting and a mounting flange. The motor has been inspected and is in full working order, ready for use. Technical specifications: - Power: 5.5 kW - Voltage: 400 V Δ / 690 V Y - Frequency: 50 Hz - Rotational speed: 2930 rpm at 400 V - Rated current: 10.0 A / 5.81 A - Efficiency class: IE3 - Protection class: IP55 - Insulation class: F - Duty type: S1 – continuous operation Bsdsz Sy Rcepfx Agksdi - Ambient temperature: up to 40°C - Date of manufacture: 02.05.2016 - KSB part number: 01629115 Condition: used, fully functional. Visible signs of use.

Condition: used, functionality: fully functional, For sale: an industrial submersible pump, Flygt 2610.171, designed for pumping water and drainage applications. The pump’s capacity is 40 m³/h, which is 40,000 liters per hour. The actual flow rate depends on the lift height and installation conditions. The pump is equipped with a float switch, a power cable, and a control module with a CEE power plug. A carrying handle facilitates transport and lowering of the unit, and the lower suction basket prevents larger debris from entering the pump. Technical specifications: Manufacturer: Flygt / ITT Water & Wastewater AB Model: 2610.171 Capacity: 40 m³/h – 40,000 l/h Power rating (as per nameplate): 1.2 kW Power supply: three-phase Voltage: 400 V star (Y) / 230 V delta (Δ) Rated current: 2.7 / 4.7 A Frequency: 50 Hz Rotational speed: 2740 rpm Operating mode: S1 – continuous operation Ingress protection: IP68 Maximum medium temperature: 40°C Power factor cos φ: 0.85 Weight: approximately 19 kg Bdedpfez S Nbwex Agkoi Made in: Sweden Included in the set: Submersible pump Float switch Power cable Control module with switch and indicator lights CEE power plug

Condition: used, Druck- und Vakuumkompressor - Pressure and Vacuum Pump Rietschle SKP 35826-02 (03) Baujahr / Year 1995 - SN. 1663459 Frequency 50 Hz Speed 2900 min power required 3 kW Online-Video-Inspection by WhatsApp - MS Zoom - Telegram Bsdpfx Ao Af Amregkodi On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: used, Year of construction: 2015, axis stroke (X,Y,Z) 6175x1550x300 mm Number of spindle head vertical 20 St. Number of spindles head horizontal 10 St. Number of milling agregates 1 St. Speed 24.000 U/min. Capacity 300 kg/h Sawing unit ja_yes 0 Control Homag PC85 CNC powerTouch HOMAG BMG 511 /60/12/F/K Profi ----- Machine already professionally dismantled and stored at our warehouse in Oberkochen: - 5-axis CNC processing center - Moving gantry machine (dual-drive gantry system) - 1 HOMAG DRIVE 5 C+ routing spindle, 5-axis, HSK-F63, 15 kW, max. 24,000 rpm - 1 HOMAG Multi Processing Unit Drilling head with 30 spindles: V20 / H10 / S360° "MPU" MultiProcessingUnit with C-axis +/- 185° - 1 Chain tool changer, 30-position - Includes SL laser projector - Includes vacuum suction cups (as available) - Spare parts and accessories as shown in photos - Last HOMAG 5-axis service: 2024 - Last HOMAG service: 2025 - Price includes professional dismantling and loading onto customer's truck - Costs for loading frames/transport securing devices NOT included; see note at the end of the description Technical Data ----- Max. workpiece lengths: All aggregates: Single 6,000 mm; Pendulum min. 1,550 mm, max. 3,200 mm Tool dia. 25 mm: Single 6,175 mm; Pendulum min. 1,550 mm, max. 3,200 mm Max. workpiece width: All aggregates, front stop 1,100 mm Milling operation tool dia. 25 mm: Front stop 1,325 mm, rear stop 1,550 mm Workpiece thickness: Max. 300 mm including clamping devices Routing spindle and drilling head ----- 2 independent Z-axes 1 HOMAG DRIVE 5 C+ routing spindle, 5-axis, HSK-F63, 15 kW, max. 24,000 rpm Liquid-cooled routing spindle, DRIVE5C+ aggregate interface with 3-point torque support 1 HOMAG Multi Processing Unit Drilling head with 30 spindles: V20 / H10 / S360° "MPU" MultiProcessingUnit with C-axis +/- 185° for drilling and sawing operations at any angle 1 motor 2.3 kW, frequency-controlled, max. speed 7,500 rpm selectable via program for rapid processing even with small diameters 20 vertical HIGH-SPEED spindles 10 horizontal spindles Bodpfxszqggvs Agkjdi 1 grooving and parting saw Includes Z-axis module Includes extraction hood Tool changer: ----- 1 Pick-up station for 350 mm saw blade for DRIVE5(C)+ 1 Chain tool changer, 30-position, D=80 For tools and aggregates with HSK-F63 Chain changer with 30 tool/aggregate positions for use with machines featuring 1 main spindle 1 upstream double gripper for rapid tool changing Console table with ----- 12 consoles, Y=1,500 mm for K-table 6 lifting rails (HPL), lift 100 mm Additional accessories: ----- SPEED PACK: Increase in... Max. traverse speed of X-axis: 80 m/min; vector speed = 110 m/min Contour laser positioning aid 1 vacuum pump (300 m³/h) Chip conveyor belt with extension Vacuum clamping system SL-Laser Energy-efficient 5-axis extraction hood Safety equipment: ----- Laser, bumper SAFESCAN for Speed ??Pack CE mark HOMAG Speed ??Pack HOMAG Quality Package Enclosed energy chain Control system ----- PowerControl PC85 HOMAG powerTouch Handheld terminal HOMAG IPC Powerpack Software ----- HOMAG woodWOP 7.1 WoodScout diagnostic system MMR B...

Condition: used, Year of construction: 2014, functionality: unexamined, input voltage: 400 V, input current: 32 A, input frequency: 50 Hz, type of input current: three-phase, temperature: 125 °C, number of chambers: 1, We offer two used CATALYTIC DEBURRING OVENS, 125°C, Zahner Electronic, manufactured in 2014. The ovens were purchased with the intention of using their components as spare parts. They have never been put into operation. Nothing has been disassembled. Year of manufacture: 2014 Rated frequency: 50 Hz Rated voltage: 3L, N, PE 3×400 V AC Degree of protection: IP40 Control voltage: 24 V DC Rated current: 32 A Short-circuit current Icp: 10 kA Bdodozq Ax Ujpfx Agksi Peak short-circuit current Ipk: 17 kA Type testing: not type tested Touch protection: for trained personnel. The stated price is for two units. If you have any questions or require additional information, please send a message or contact us by phone.

Condition: used, Year of construction: 2004, Used machine with separate base frame for Vacomat S/N and discharge screw Year of manufacture: 2004 Features and Technical Specifications SCHUKO VacoVent 750 fan unit - Clean air exhaust fan for SCHUKO Vacomat filter systems - Motor power: 7.5 kW - Nominal airflow: 5,089 m³/h - Associated negative pressure: 3,720 Pa - Sound pressure level: 72 dB(A) - Compact, separate fan unit for integration into a compatible extraction system Separate base unit for Vacomat S/N - Equipped with a motor-driven discharge screw - Mechanical discharge of collected dust and chip material for further conveyance - Gear motor power: 0.55 kW - Operating voltage: 400 V - Current consumption: 1.55 A - Frequency: 50 Hz - Screw drive speed: 11 rpm Bedpj Af I Imsfx Agksdi - 3-phase alternating current - Manufactured in Germany Shipping dimensions: - Fan unit: 1,230 × 840 × 905 mm - Base frame: 1,400 × 1,280 × 1,100 mm - Base frame weight: 268.5 kg

Condition: new, functionality: fully functional, Year of construction: 2026, control type: CNC control, degree of automation: automatic, actuation type: electric, laser type: fiber laser, laser source manufacturer: MAX Photonics, laser power: 6,000 W, laser wavelength: 1,080 nm, sheet thickness steel (max.): 30 mm, sheet thickness stainless steel (max.): 15 mm, sheet thickness aluminum (max.): 12 mm, travel distance X-axis: 3,050 mm, travel distance Y-axis: 1,550 mm, travel distance Z-axis: 120 mm, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, type of cooling: water, overall weight: 5,000 kg, door opening width: 3,000 mm, door opening height: 600 mm, Equipment: CE marking, cabin, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, safety light barrier, New laser cutting machine with 6kW fiber laser Our goal is to offer highly precise, long-term stable, and yet affordable laser machines. Our machines are ideal for workshops and repair shops. A perfectly developed cutting parameter library is included in the scope of supply, as is first-class service. - Machine without automatic exchange table! The loading takes place on the long side of the machine. - Very space-saving - Extremely energy-efficient cutting system - Requires only approximately 4 x 4.5 meters of installation space - 6kW laser source from MaxPhotonics (G5 / CE version) - Laser generator with socket efficiency greater than 30% - Suitable for aluminum - Top quality, schedule a viewing now! Cutting of steel sheet up to 30mm (maximum) Cutting of stainless steel sheet up to 15mm (maximum) Cutting of aluminum sheet up to 12mm (maximum) Cutting of brass sheet up to 8mm (maximum) - Travel range 1500 x 3000mm (for large formats) - Machine control in German - Safety light curtain for maximum operator protection - Comprehensive collision protection measures for the cutting head - Large laser protection windows for observing the cutting process - Extensive cutting parameter file - Incl. nozzle module - Very easy to operate. - Powerful laser chiller - Machine control in German - German service and spare parts supply Bjdpfxjxw T Nko Agkjdi - Powerful laser chiller - Filter extraction is optionally available (5.5kW with frequency inverter for pleasantly quiet operation) The following options are also available: - Automatic nozzle changer (Optional) - Automatic nozzle centering (Optional) - Raw material recognition and part nesting via camera system CypVision (Optional) - Import of 3D files (.stp) and unfolding (Optional) - Direct import of SolidWork, SolidEdge, Inventor, etc. (Optional) - Nesting, calculation, remnant plate management, etc. (Optional) - ERP system can be combined with all your other sheet metal processing machines (Optional) Leasing or hire purchase is possible via our financing partner. Sales are exclusively to commercial businesses. Delivery / consultation / sales only in Germany / Austria / Switzerland Machine dimensions approx.: Length: 4.0m Height: 2.3m Width: 4.5m Total weight: approx. 4500kg Do you need a different laser power, a different table shape, or a different table size? No problem. I will gladly create a suitable offer. For example, a 2kW machine from 29,990 euros. Are you unsure which laser power is suitable for your application? Of course, I will carry out cutting tests according to your requirements. A lot is possible here.

Condition: excellent (used), Catalog number: 8134 TECHNICAL DATA - max. material width 400mm - max. cutting height 170mm - upper spindle diameter 70mm - lower spindle diameter 70mm - circular saw blade diameter: option 1: 250mm/350mm, option 2: 300mm/300mm - length of the upper spindle working part 330mm - length of the lower spindle working part 330mm - spindle wedges 2 pcs - power of the upper drive spindle motor 30kW - power of the lower drive spindle motor 37kW - power of the feed drive motor 2.2kW - stepless feed speed adjustment via frequency inverter - average dust extraction nozzle diameter 1x200mm, 1x180mm * from above: - pawls 2 rows - toothed draw roller - saw shaft - toothed draw roller - metal slip roller * from below: - metal draw roller, smooth - pawls Bodpfxe Afdcuj Agksdi - 2 toothed draw rollers - saw shaft - 2 toothed draw rollers - 2 metal draw rollers, smooth * infeed table: 3000x600x930mm - motor 1.1kW - 6 draw rollers, adjustable via frequency inverter * outfeed table: 3000x500x930mm - 6 slip rollers - overall dimensions L/W/H 2750/1500/2140mm - weight approximately 2500kg Net price: 45900 PLN Net price: 10674 EUR, depending on the exchange rate of 4.30 EUR (Prices may vary due to significant fluctuations)

Condition: used, Year of construction: 2018, Used Machine Year of Manufacture: 2018 Special Feature: Machine with a gluing height of up to 100 mm! Bdodpfx Agezk Nmreksi Condition: Factory-inspected by Lange Maschinenbau Features and Technical Specifications: - Machine table with 13 rollers for improved workpiece guidance - Edge feed, synchronized with the belt feed - Edge thickness adjustable via digital counter - Pneumatic roller separation with blade (for cutable edges) - Three pressure rollers - Belt feed: - 0.25 kW - Approx. 1,250 mm long - Approx. 6.0 m/min - 50 mm wide toothed belt with a thick, workpiece-protective rubber covering - Digital counter for height adjustment - Direct glue application to the workpiece: Leak-proof glue tank with glue supply from below and fast heat-up time after machine shutdown - Flush trimming unit: - for the front and rear edges of the workpiece - Automatic sensing of the workpiece - Pneumatic trimming with a blade for cut-ready edges - Flush milling unit - With vertical sensing and horizontal guidance - Reproducible adjustment via digital counters - 2 powerful 0.4 kW high-frequency motors - Continuously adjustable from 4,000 to 18,000 rpm - Milling cutter: 70 mm, Z4, radius 2 mm/15° - Central exhaust port: 100 mm - 2 chip extraction hoods with 60 mm hose - Automatic height adjustment of the upper router bit via the belt feed - Continuous workpiece support, approx. 1,800 mm long - Workpiece support rail, extendable by approx. 300 mm - Rotatable film plate: 800 mm - Workpiece width: min. approx. 80 mm - Workpiece thickness: 10–100 mm - Workpiece length: min. approx. 220 mm - Edge thickness: 0.4–2.0 mm - Roller cutting: max. 1.0 × 55 mm, 2 × 45 mm - Glue pot heating power: 2.7 kW - Heat-up time: approx. 10 minutes - Working height: approx. 880 mm - Electrical connection: 400 V, 50 Hz, 3-phase N - Total power consumption: 3.8 kW - Pneumatic connection: 6 bar Dimensions (without film tray): approx. 1800 x 700 x 1300 mm Weight: approx. 260 kg

Condition: used, WEISS Weiss WK3-1000/70 climate testing chamber with temperature and humidity control – 990 liters – -70 to +180 °C Weiss WK3-1000/70 Air-cooled climate and temperature testing chamber with touch panel, 990 liters test chamber volume, and a temperature range of -70 to +180 °C For sale is a Weiss climate testing chamber, type WK3-1000/70, with temperature and humidity control. The unit is suitable for temperature and climate testing of components, assemblies, and industrial products. The integrated touch panel allows for setting and monitoring temperature, humidity, and test programs. Technical data: Manufacturer: Weiss Type: WK3-1000/70 Product type: Climate and temperature testing chamber Serial number: 59226115080010 Test chamber volume: approx. 990 liters Cooling: Air-cooled Operation: Touch panel Weight: approx. 955 kg Test chamber dimensions: Bodpfx Age Aghkujkodi Height: 950 mm Width: 1,100 mm Depth: 950 mm External dimensions: Height: approx. 2,000 mm Width: 1,415 mm Depth: 2,105 mm Data for temperature testing: Temperature range: -70 to +180 °C Heating rate: approx. 4.0 K/min Cooling rate: approx. 2.5 K/min Data for climate testing: Temperature range: +10 to +95 °C Humidity range: 10 to 98 % relative humidity Electrical data: Rated voltage: 3/N/PE AC 400 V ± 10 % Mains frequency: 50 Hz Rated current: 29 A Rated power: 13.8 kW Refrigerant: R404A: 4.6 kg R23: 1.2 kg Equipment: Touch panel for operation and program control Test chamber made of stainless steel Viewing window with lighting Air circulation system with fans Insert shelf Side openings: approx. 50 mm and 130 mm Communication interfaces Testing: The climate testing chamber has been tested. Heating, cooling, and humidity functions have been checked. Scope of delivery: 1 × Weiss WK3-1000/70 climate testing chamber with integrated equipment and insert shelf Scope of delivery as shown in the pictures. Condition: Used The unit has been tested. Condition and scope of delivery, see pictures. Tools, machines, and other items not explicitly mentioned are not part of the sale. Subject to changes, errors, and prior sale. We will gladly answer any further questions by telephone.

Year of construction: 2026, operating hours: 5 h, condition: new, functionality: fully functional, NOMA NOWICKI MHM-21/84 F is a brine injector designed for the uniform injection of fish and seafood, both boned and unboned, and – after a quick needle change – any other boned or unboned products, such as poultry. Manufactured in 2026, the machine features 21 needle sockets (84 quadruple needles), steel needles operating at a brine pressure of up to 3 bar, microprocessor control with a color touchscreen, and an AISI 316 stainless steel construction in food-contact areas. Replacement parts are included. Key Advantages of the NOMA NOWICKI MHM-21/84 F Brine Injector The machine ensures even distribution of brine in delicate products, such as fish fillets and seafood, and, after changing the needles, is suitable for injecting poultry and other products, whether bone-in or boneless. Smooth adjustment of pressure and head speed, 2-mm-diameter needles, and three-level pressure adjustment allow the injection process to be tailored to various raw materials and recipes. Manufacturer: NOMA (NOWICKI MACHINERY) Machine type: brine injector Model: MHM-21/84 F Serial number: 01126803 Year of manufacture: 2026 Power supply: 3 x 400 V, 50 Hz Marking: CE, manufactured in the EU Installed power: 2.4 kW, maximum current 12 A Pump power: 1.5 kW Construction: AISI 316 stainless steel in food-contact areas, AISI 304 in other components; designed for use in the fishing industry Number of needle sockets: 21 Maximum number of needles: up to 84 (quad needles) for fish and seafood, or 42 for poultry Needle diameter: 2 mm Head: easily replaceable, with quadruple needles as standard, top-side needle loading Head drive: top-mounted, NORD gearbox with frequency converter, stepless speed control Number of head strokes: 21 – 44 strokes/min Maximum head stroke height: 110 mm Maximum product height before injection: approx. 90 mm (up to 110 mm after injection) Removal clamp: adjustable to 3 heights, prevents over-injection Conveyor: easy-to-clean plastic belt, 325 mm wide Bedpfx Ago Aggiqsksdi Conveyor feed per head stroke: adjustable, 16; 35; 75 mm/cycle Brine pressure: continuously adjustable from 0.5 to 3.0 bar (in 0.1 bar increments), up to 3 bar as standard Brine pump: centrifugal, high-efficiency, stainless steel, controlled by a variable-frequency drive Filtration: multi-stage, easy to clean, with an additional tubular filter for improved brine purification Brine tank: stainless steel, 80 L, with brine mixing (preparation) and drainage Injection rate for a single pass (salmon): up to 12% Controls: microprocessor-based HMI, MITSUBISHI color touchscreen, MITSUBISHI PLC, variable-frequency drives on the gearbox and brine pump Throughput (approximate, for 1 pass): Herring fillets: injection rate approx. 10%, approx. 200 kg/h Salmon fillets: injection rate 8 – 12%, approx. 250 kg/h Poultry fillets: injection rate 25 – 30%, approx. 500 kg/h Chicken drumsticks: injection rate 20%, approx. 500 kg/h Chicken necks and wings: injection rate 12%, approx. 400 kg/h

Condition: ready for operation (used), Year of construction: 2002, travel distance X-axis: 550 mm, travel distance Y-axis: 850 mm, travel distance Z-axis: 450 mm, total height: 2,650 mm, total width: 2,400 mm, overall weight: 6,200 kg, table load: 2,000 kg, product length (max.): 2,680 mm, number of axes: 4, This 4-axis OPS INGERSOLL GENTRY EAGLE 800 was manufactured in 2002. It features a maximum axis travel speed of 2,000 mm/min and a worktable dimension of 760 × 1,000 mm, with a maximum table load of 2,000 kg. The machine includes advanced capabilities such as automatic positioning functions and an integrated cartridge filtration system. If you are looking to get high-quality die-sinking EDM capabilities, consider the OPS INGERSOLL GENTRY EAGLE 800 machine we have for sale. Contact us for further details. • Number of axes: 4 (X, Y, Z, C) • Max. axis travel speed: 2,000 mm/min • Worktable size: 760 × 1,000 mm • Work tank: rise-and-fall, filled movable • Tank clear dimensions (L × W × H): 800 × 1,100 × 480 mm • Max. programmable/automatic dielectric level: 450 mm • Dielectric capacity: 800 L • Work head: max. head load 200 kg • Distance electrode chuck to table (min/max): 135 / 585 mm • C-axis rotation speed: 1–20 rpm • Minimum command increment (linear/C-axis): 0.001 mm / 0.001° • AC servo motors • 10.4-inch colour LCD display • Ethernet interface • Fuzzy Pro2 feed control • Orbital machining functions • Automatic positioning functions • Integrated cartridge filtration system (filter surface 6 m²) • Automatic central lubrication • Cooling system: 3.9 kW • Power input: 16 kVA • Fuse protection: 32 A • Voltage/frequency: 400 V / 50 Hz Bsdpfx Ao Ahix Ejgksdi • Generator weight: 640 kg Additional equipment • Electrode changer magazine with 19 positions (automation)

Condition: used, Year of construction: 2015, SANDYA 900 - WIDE-BELT CALIBRATING AND FINE-GRINDING MACHINE S900 RRT 135 KEY FEATURES 2,620 MM LONG GRINDING BELTS FOR OPTIMAL SURFACE QUALITY AND PRODUCTIVITY PHOTO CELLS WITH SYSTEM WITH BACKGROUND SUPPRESSION: THE CORRECT CENTERING OF THE GRINDING BELT IS ALWAYS GUARANTEED FLOATING PRESSURE ROLLERS: ACCURATE AND CORRECT SUPPORT OF THE WORKPIECES UNDER ALL WORKING CONDITIONS TECHNICAL DATA Working width mm 1,350 Min./max. working height mm 4-170 Grinding belt width mm 1,370 Grinding belt length mm 2,620 Motor power 1st unit kW (HP) 11 (15) Motor power 2nd/3rd unit kW (HP) 11 (15) Gear motor kW (HP) 0.6/1.3 (1.8/1.7) Feed speed m/min 4.5/9 GENERAL FEATURES: Machine frame and work table* Steel structure with electrical control cabinet on the front of the machine * Insertion of the grinding belts from the left side of the machine * motorized table height adjustment * Main motors integrated into the machine frame Electrical equipment* Electromechanical control panel on the left front side of the machine * automatic star-delta starter for the main motor * motor protection switches for the motors * motors in insulation class IP 54 Safety and protective devices* automatic brake for immediate stopping of the units * emergency stop switch at the workpiece infeed * emergency stop switch at the workpiece infeed and outfeed * lockable main switch * automatic emergency shutdown of the machine in case of: - grinding belt breakage - grinding belt not tensioned - protection against lateral deflection of the grinding belt - lack of compressed air - overload of the main motors Note: the standard version with 400 volts 50 Hz requires a three-phase power supply + neutral conductor + earth conductor. If the 400-volt power supply is without a neutral conductor, a single-phase transformer must be ordered in addition from the price list. The same transformer must also be ordered for a machine with a voltage higher than 400 volts, regardless of whether a neutral conductor is available or not. Machine version with 220 or 230 volts (50 or 60 Hz) is available at an additional cost (see price list). BASIC MACHINE STANDARD EQUIPMENT - R175/85 rubber-coated calibrating roller, diameter 175 mm, 85 Shore - 1st position - R220/65 rubber-coated calibrating and grinding roller, diameter 220 mm, 65 Shore - 2nd position - Hard grinding shoe with manual adjustment of the working height - Replaceable graphite cloth - Motor power 1st unit 11 kW (15 HP) - Motor power 2nd and 3rd unit 11 kW (15 HP) - Electronic ammeter for the main motor to display the current consumption - Electronic display of the working height - Electronically controlled grinding belt oscillation - Rubber pressure rollers - Recoil protection at the infeed before the first unit - Rubber feed belt 60 SH - Roller table with two rollers at the infeed and outfeed of the work table - Belt feed with two speeds 4.5 / 9 m/min with gear motor - Automatic belt centering European safety regulations (CE marking) 1 piece SANDYA 900 RRT 135 - Calibrating and fine-grinding machine 1 piece First and second "R" unit with roller and third "T" unit with grinding shoe Voltage 400 EU 1 piece Frequency 50 Hz 1 piece "C plus" version for RRT 1 piece with: - pneumatic switching on and off of the roller – 1st unit "R" - pneumatic switching on and off of the roller – 2nd unit "R" - "MESAR 46" electronic oscillating grinding shoe - electronic adjustment of the working height - Selection of belt running direction 2nd grinding belt 1 Bods Aflwyspfx Agksdi

Condition: used, Year of construction: 2022, Plus freight 4,000.00 € and installation and commissioning 5,000.00 € Grinding system B Sand 5 with partial lathe Working principle The panel is placed on the infeed table. It goes into the partial lathe and centered. It is ground in the grinding system, through and back. The panel is turned in the partial lathe. It is ground on the other side in the grinding system. Then there are two options: either the panel goes onto the outfeed table and unloaded or it comes back onto the infeed table and is unloaded there (the second option extends the working time). Grinding system equipment 1 upper grinding lamella roller suitable for surfaces. Power 3 kW; D 420 mm; L 1300 mm. Cross brush suitable for grinding the cross fibers. D 420 mm; L 300 mm. Power 1.1 kW. Cross brush suitable for grinding the cross fibers. D 420 mm; L 300 mm. Power 1.1 kW. 3 upper sanding discs for perfectly trimming the longitudinal and transverse wood fibers. Power 1.5 kW each; D 400 mm. Disc brush for beveling edges. The unit functions as a deep brush. After detecting the panel edges, it will follow the door edges. Power 0.75 kW; D 250 mm. Machine features: -The unique sanding system of this machine guarantees perfect wood sanding and/or intermediate sanding of the panels. -All tools are controlled by frequency converters. -All brushes are equipped with quick-release sanding strips without replacing the hub. -The discs are equipped with air bladders to optimize cleaning and service life. -Sanding discs are equipped with a Velcro fastening system. -The feed and rotation speed are PLC-controlled to prevent edge breakage. -High-quality sanding on 4 sides thanks to the system's constant removal rate. -Automatic and rapid unit changeover. - Constant throughput height, PLC and industrial software enable interlinking in a surface line. - Continuously variable speed of the discs, brushes and feed thanks to the fully equipped frequency converter. - Right/left rotation of the discs and brushes with different abrasive grits. - Individually driven feed of the discs, rollers and belts. - Additional adjustment of the brushes and discs to balance the use of the abrasive and to allow for changing the grinding pressure on the surfaces. - Strong support bed made of tubular steel guarantees the best rigidity, stability and flatness. - Planed upper support bed to ensure the best parallelism of the working surface for the grinding discs. - All unit carriages are designed with linear recirculating ball bearing guides, thus high load capacity and high precision. - Motorized feed belt controlled by a frequency converter, 0.55 kW. Machine doors equipped with safety devices. - Machine doors equipped with windows to observe the workpieces during operation. - Under the units, there are 80 mm rubber-coated pressure rollers to hold the workpieces in place during processing. · Low follow-up costs thanks to individual blade replacement. · Low running noise thanks to the enclosed system housing. · All units have suction housings with their respective suction supports. Cover plate with suction nozzle. · Completely encapsulated machine housing for a clean environment. Bdsdsvvkipopfx Agkji

Condition: used, Year of construction: 2021, Exhibition unit (little used) Unit for cutting soft materials such as honeycomb cores, acoustic elements and fabrics using oscillating movements Processing options: Cutting straight or radial cutouts Typical areas of application: • Textiles: Cutting fabrics or textiles (e.g. leather, felt, etc.) • Cutting honeycomb cores for doors, staircase construction, exhibition stand construction, caravan construction • Acoustic elements: Cutting polyester, foam or other sound-absorbing materials • Aviation, boat building, aerospace: Cutting honeycomb cores Technical specifications Max. input speed: 6,000 min-1 Max. output speed: 9,000 min-1 Gear ratio: 1:1.48 Max. torque: 8 Nm Permissible operating temperature: max. 85°C Position of the torque arm to the tool: 360° Processing angle: 0° Number of tool outputs: 1 / fixed Lubrication: Grease / lifetime grease filling Amplitude: 4 mm Frequency: 150 Hz Storage location: Garbsen Bdjdpfsvvi Iqjx Agksi

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, machine/vehicle number: 19991798, travel distance X-axis: 2,500 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 550 mm, controller manufacturer: Heidenhain, TECHNICAL DETAILS Travel range, X-axis: 2,500 mm Travel range, Y-axis: 800 mm Travel range, Z-axis: 550 mm Spindle mount: SK 50 MACHINE DETAILS CNC control: Heidenhain Voltage: 400 V Frequency: 50 Hz Total connected load: 40 kVA Weight: 2,000 kg EQUIPMENT Siemens motors and servo drives Preparation for 4th axis (4th axis not included) Note: Without tools and clamping devices for the machine table & without mist extraction. Bsdpfxo Ahm Eye Agkjdi

Condition: ready for operation (used), Year of construction: 2001, operating hours: 2,609 h, functionality: fully functional, machine/vehicle number: 586034, center width: 3,010 mm, swing diameter over cross slide: 310 mm, quill stroke: 160 mm, spindle speed (max.): 2,800 rpm, No minimum price – guaranteed sale to the highest bidder! Submitting a bid obligates you to collect the item within the specified timeframe between December 1, 2026, and December 10, 2026! TECHNICAL DETAILS Center distance: 3,010 mm Diameter of rotation over the compound slide: 310 mm Diameter of rotation: max. 580 mm Travel of the compound slide: 265 mm Beds Ahny Nspfx Agksdi Spindle diameter in the front bearing: 120 mm Material passage: max. 72 mm Chuck diameter: 250 / 315 mm Spindle speed: 3–2,800 rpm Tailstock Outer diameter of the quill: 75 mm Quill travel: max. 160 mm Quill mounting: MK 5 MACHINE DETAILS CNC control: Siemens Operating voltage: 400 V Frequency: 50 Hz Connected power: 16 kVA Rated current: 25 A Dimensions & Weight Dimensions (L x W x H): 8,000 x 1,800 x 2,000 mm Machine weight: 5,000 kg Operating hours (meter reading): 2,609 h EQUIPMENT Chip conveyor Workshop cabinet Machine documentation External reference: Frankenthal - Lot 396

Condition: ready for operation (used), operating hours: 839 h, functionality: fully functional, machine/vehicle number: 586034, turning length: 1,000 mm, overall weight: 3,000 kg, No minimum price – guaranteed sale to the highest bidder! Submitting a bid obligates you to collect the item within the period from December 1, 2026, to December 10, 2026! Bjdpe Ahn D Ejfx Agkedi TECHNICAL DETAILS Turning length: 1,000 mm Center height above bed: approx. 250 mm Turning diameter above bed: approx. 500 mm Center height above steady rest: approx. 150 mm Turning diameter above steady rest: 300 mm MACHINE DETAILS Operating voltage: 400 V Frequency: 50 Hz Connected load: 16 kVA Rated current: 25 A Dimensions & Weight Dimensions (L x W x H): 5,000 x 1,800 x 2,000 mm Machine weight: 3,000 kg Operating hours (recorded): 839 h EQUIPMENT Tailstock Multifix turning tool holder 3-jaw chuck, diameter 250 mm Steady rest Clamping jaws Additional chuck Machine documentation External reference: Frankenthal - Lot 363

Condition: ready for operation (used), Year of construction: 2001, operating hours: 774 h, functionality: fully functional, machine/vehicle number: 373/02  , center width: 3,040 mm, swing diameter over cross slide: 350 mm, quill stroke: 210 mm, spindle speed (max.): 1,800 rpm, No minimum price – guaranteed sale to the highest bidder! Submitting a bid obligates you to collect the item within the period of December 1, 2026, and December 10, 2026! TECHNICAL DETAILS Center distance: 3,040 mm Diameter of swing over cross slide: 350 mm Max. diameter of swing: 650 mm Travel of cross slide: 375 mm Spindle head size: 8 Spindle diameter in the front bearing: 120 mm Material passage: max. 71 mm Chuck diameter: 250–315 mm Speed range: 2–1,800 rpm Tailstock Outer diameter of quill: 110 mm Max. quill stroke: 210 mm Internal taper: MK 6 MACHINE DETAILS Operating voltage: 400 V Frequency: 50 Hz Rated current: 63 A Connected power: 41 kVA Bedpfx Ae Ahn Hksgkedi Control: SIEMENS Dimensions & Weight Dimensions (L x W x H): 8,000 x 2,000 x 2,000 mm Weight: 6,000 kg Recorded operating hours: 774 h EQUIPMENT Tailstock Multifix tool holder 3-jaw chuck FORKARDT, diameter: 300 mm 2 steady rests Additional Multifix tool holder Various centers Various tapers Tool holders Turning tool holders Milling cutters Jaws Documentation External reference: Frankenthal - Lot 366