Used Fruit Press for sale (13,081)

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, overall weight: 15,800 kg, Equipment: CE marking, documentation/manual, COLGAR PRESS BRAKE Model: 4000x200T Year: 2003 Axes: 6 + Back gauge table Control: CYBELEC 1200/B Cjdpszx T D Rjfx Aptorg Complete documentation available.

Condition: used, Year of construction: 2003, Technical details: Pressure: 60 t stroke: 400 mm table surface area: 700 x 700 mm passage opening in table: Ø 100 mm distance between columns: 700 mm distance between columns: 700 x 1300 mm table height over floor: 850 mm dayligth: max. 1150 mm daylight dimension : table/slide up: 400 - 800 mm cylinder diameter: Ø 110 mm total power requirement: 4,8 kW machine weight approx.: 930 kg dimension machine approx.LxWxH: 1,2 x 0,7 x 3,0 m HYDRAULIC DOUBLE COLUMN PRESS Special construction welded from 25 mm sheet steel Operating mode: single stroke Punch holder: pin M 70 x 2.5mm and punch Ø 128 x 440mm Table protection housing Round punch Ø 130 x 120 mm Hydraulic unit Csdpezvnrdofx Apterg *

Year of construction: 2025, condition: new, New machine Year of manufacture: 2025 Features and technical specifications: Fully equipped in standard version with: - Robust, torsion-free steel frame, welded and bolted construction - Lamella pressure beam TOP with 6 elements, lamella pressure beam SIDE with 5 elements - Lamella pressure beams with proven tolerance compensation system (Ganner system) for tightly compressed carcass joints - Counter-pressure surfaces (side pressure wall, base) are 38 mm thick, coated, continuous support plates - Continuous pressing surface, height 95 mm, on lower vertical pressure beam - Electromechanical adjustment of both pressure beams via precision trapezoidal thread spindles (with increased lead and concentricity accuracy) and high-performance ball nuts with grease reservoir - The pressing process is carried out electromotorically, via 2 independent worm gear motors (2 x 0.75 kW) - Pressing force of the pressure beams is infinitely variable and electronically controlled by 2 potentiometers, regulated via frequency inverter, ensuring absolutely wear-free force control - Pressing force for horizontal pressure beam: min. 500 daN (kg), infinitely adjustable up to max. 2200 daN (kg) - Pressing force for vertical pressure beam: min. 300 daN (kg), infinitely adjustable up to max. 2200 daN (kg) - Pressing and adjustment speed of the beams with fine positioning, using 3-stage selector switch: 5 / 10 / 25 mm/second - Jog mode for precise positioning of both pressure beams, e.g. for low pressing forces, drawers, and carcasses at 45° - Simplest operation via 6 separate push buttons, 8 movement cycles selectable via control panel - Freely adjustable press time preselection 0-30 min (switchable to seconds or hours), with individually programmable opening dimensions for both pressure beams - Re-pressing function to increase or decrease the pressing force during the pressing process - Working height/loading height: 300 mm - Working dimensions: Length min: 150 mm, max: 2500 mm; Height min: 150 mm, max: 1400 mm; Depth: 700 mm Including surcharge for rapid traverse speed, for fast positioning of the pressure beams, controlled via automatic workpiece detection with sensors in the pressure beams, pressing speeds 5 / 10 / 25 mm/sec and rapid traverse speed 50 mm/sec, the sensors can be deactivated for pressing special components Including a set of machine feet for 500 mm working height Codpfxsw Nafks Aptorg Location: Flörsheim Availability: Short-term

Condition: new, Year of construction: 2026, functionality: fully functional, PDH Series – Heavy-Duty CNC Press Brake Heavy-Duty CNC Press Brake – PDH Series | 4000–16000 kN | Bending Length up to 12000 mm The PDH Series is designed for the most demanding heavy industrial bending operations. With forces ranging from 400 to 1600 tonnes and bending lengths up to 12 meters, this series handles thick plate and structural steel bending with exceptional accuracy. Available Models & Key Parameters: ModelForce (kN)Bending Length (mm)400/310040003100400/410040004100500/600050006000600/50006000 5000600/600060006000600/800060008000800/600080006000800/800080008 0001000/60001000060001000/80001000080001200/80001200080001600/800 01600080001600/120001600012000 Common Specifications: CNC Axes: 3+1 / Y1, Y2, X, V Slide Stroke: 300–500 mm Open Height: 560–1000 mm Throat Depth: 400–800 mm Main Motor Power: 30–110 kW (2×55 kW on the largest models) Oil Tank Capacity: 800–3000 L Approaching Speed: 70–100 mm/s ✅ Heavy-duty construction for thick plate & structural steel Csdpfoy Swptjx Aptjrg ✅ Bending lengths up to 12,000 mm ✅ Forces up to 16,000 kN (1600 t) ✅ CE certified | Warranty | Spare parts & technical support

Condition: used, Name: Used chamber filter press Manufacturer: Diefenbach Type: FP DE800-90 Year built: 1997 Plate size: 800 x 800 mm Number plates: 90 Press content: approximately 1350 liters Filter area: Approx. 99 m2 Filter pressure: 15 bar Cake thickness: 30 mm Cycle: Closed Plate transport: Automatically Plate material: Polypropylene Construction form: Bridge beam press Cedpfx Ajzy H Dgeptsrg Filter cloth washer: No Filter cloths: No Dimensions: L 8500 x W 1300 x H 2100 mm Empty weight: approx. 8000 kg Technical doc.: Yes Accessories: A control cabinet, a hydraulic system, a light barrier Condition: Second hand Price: By request

Condition: good (used), Year of construction: 1983, Rotary indexing table with 12 stations Automatic ejector Three pressing stages Pressing force: 1,000 kN Stroke: 12-120 mm Stroke rate: 30-60 strokes/min Ram adjustment: 80 mm Total weight: 9,500 kg Cedpfxolp Nqhs Aptorg

Condition: new, Year of construction: 2026, Exceptional special price, as it was used at our in-house trade fair. Operating hours: 2 Immediately available – subject to prior sale. First come, first served. Compact design, high reliability, and excellent value for money: these are the advantages of this machine, which is perfectly suited for briquetting materials such as wood, polystyrene, foams, or paper. A special feature is the screw pre-compaction, which guarantees high briquette quality. For quick and easy installation, the C 140 is mounted on a stable base frame. Overall dimensions: 1900 x 1410 mm Hopper opening: 1044x1044 mm Hopper height: 1010 mm Hopper volume: 1.1 m³ Drive power: 4 kW Briquette diameter (mm): 40 Throughput (kg/h): 30-40 Hydraulic oil volume (l): 100 Weight (kg): 530 Equipment: Press Powerful pressing mechanism with wear-resistant, chrome-plated jaws Pre-compactor with end-position dampened cylinder and bolted cover Switchgear with PLC control Hydraulics Credpfxelht H Ej Aptsg Separate oil tank with pump motor and valve control Safety switch for oil temperature Tank with agitator and gear motor Screw channel with discharge screw and gear motor Accessories: Briquette length monitoring Automatic on/off Location: 54634 Bitburg

Year of construction: 2026, condition: as good as new (ex-display), Vacuum membrane press The VP series is the optimal solution for woodworking. The VP 3000 is equipped with heating technology, which reduces the drying time of the adhesive, thereby increasing performance. Possible applications: Veneering / Form gluing / Covering... Coating of various profiles (veneer, paper, plastic...) Wood bending: Production of curved and laminated components The heating system is equipped with temperature control Rubber membrane 2.5 mm Tabletop is made of plastic 12 mm Oil-free Becker vacuum pump 25 m3/h The control system of the vacuum / tank capacity 15 l Working area: 3000x1500mm Crsdpfx Aodvltyepteg Heating system temperature: Max. 60 degrees C Heating system: 4.5 kW Pump power: 0.75 kW Vacuum pump flow rate: 25 m3/h Rubber membrane External dimensions: 3100 x 1650 x 1600 mm Weight: 450 kg Location: Available from stock in 54634 Bitburg - free loading -

Year of construction: 2026, condition: new, The VPR-3500 vacuum membrane press is a universal press for woodworking and thermoforming. The VPR-3500 press is also swivelable and mobile. Possible applications: Cjdpfsd Ecc Tjx Aptorg Veneering / Form bonding / Encasing… Coating of various profiles (veneer, paper, plastic…). Wood bending: Production of curved and laminated components. Vacuum system: Work surface with vacuum channels for uniform negative pressure, even with large workpieces. Becker vacuum pump / Oil-free / Tank capacity 100 l Work area: 3500x1500mm Pump power: 0.75 kW Vacuum pump flow rate: 40 m3/h Rubber membrane External dimensions: 3600 x 1650 x 1000 mm Weight: 400 kg Location: Available ex warehouse, 54634 Bitburg - Free loading -

Condition: good (used), Year of construction: 1965, machine/vehicle number: 951065, - pressing force: 22 t - nosing: 175 mm - stroke: 120 1/min - tappet adjustment: 50 mm - stroke adjustment: 8-80 mm Crodpfxed Atnvs Aptog - no accident prevention regulation - weight: ca. 2.000 kg

Condition: used, Drilling machine Optimum B32, good condition, incl. MK4 mounting, 225 mm stop, 125 mm quill stroke Csdpfx Apewzzghstsrg Price changes, errors, and typographical mistakes reserved.

Condition: excellent (used), Year of construction: 1995, Press force: 320 kN Stroke frequency: 1,100/min Ram stroke: 3–50 mm Ram adjustment: 50 mm Csdoxcmkfjpfx Apterg Drive power: 19 kW Table length: 760 mm Including soundproof cabin Including control cabinet Including BANDMOTION servo feed Including KEYENCE camera monitoring Including decoiler The machine is in very good condition and immediately available

Condition: excellent (used), machine/vehicle number: 4868, functionality: fully functional, Country of manufacture: Switzerland Voltage: 380/50/3 Net weight with motor, without base: 245-295 kg Net weight of standard pedestal (base): 95 kg Crjdpfxow T S Tze Apteg Customs classification: 8462.9930 TECHNICAL SPECIFICATIONS TYPE D-8 / D8-200: Maximum capacity: 8 tons Maximum cutting section for Rc=40 kg/mm²: 200 mm² Standard fixed stroke: 20 mm Variable stroke, standard range: 4-36 mm Variable stroke, extra-large range: 8-50 mm Maximum height between table (without plate) and ram: 220 mm Thickness of movable plate: 42 mm Standard opening in the plate, diameter: 50 mm Opening in the table, diameter: 60 mm Ram bore, diameter x depth: 38x60 mm Ram adjustment (tie rod extension): 70 mm Ram base surface (width x depth): 105x90 mm Required power, HP: 1/3 Flywheel dimensions, diameter x width: 410x85 mm Standard flywheel speed: 180 RPM TECHNICAL SPECIFICATIONS TYPE D-8: Distance from ram center to frame: 100 mm Distance between frame columns: 170 mm Table surface, width x depth: 270x190 mm TECHNICAL SPECIFICATIONS TYPE D8-200: Distance from ram center to frame: 200 mm Distance between frame columns: 160 mm Table surface, width x depth: 270x300 mm Unless otherwise stated, these technical specifications are provided without engagement and subject to possible error or omission.

Condition: ready for operation (used), working length: 3000 mm working height: 1600 mm 3 vertical actuators Cjdpfezww Epox Apterg 2 horizontal actuators manual operation mode pump motor power: 2.2 kW 1000 kg

Condition: ready for operation (used), number of spindles: 4, - Benchtop model Crsdpfxezv D D Ns Apteg - 4 drilling spindles - Foot switch - 380/400V 50Hz 4 new drive belts have been installed.

Condition: good (used), Maximum pressing force 10 tons. Working pressure 16 MPa Cylinder stroke 400 mm Crjdpfxszvfqks Aptjg Down speed 100mm/sec Speed up to 450 mm/sec Power requirement 5.2 kW Weight 1.3 tons Clamping table changed! Not an original table!

Condition: as good as new (ex-display), Throughput of up to a maximum of 50 kilograms per hour. Briquette diameter: 50 mm. Credpszu Sknsfx Aptog Main motor: 4 kW. Very compact design. Dimensions: 1,100 x 1,500 x 1,200 mm. Weight: 570 kg.

Condition: used, Digitaldrucker mit FS-612 Broschürenfinisher / Digital Printing Press with Broschure Finishing System Digitaldrucker / Digital Printing Press Konica Minolta Bizhub PRO C1060L Baujahr / Year 2016 - SN. A5VM021003546 Total Counter 137.408 Sheets, Duplex 33.008 Auflösung / Resolution 1.200 x 1.200 dpi x 8 bit Papiergrammatur / Paper grammage 62–300 g/m² Autom. Schön- und Widerdruck / automatic Perfection 62–300 g/m² Papierformate / Paper Sizes 330 x 487mm Maximaler Druckbereich / max. Print Area 323 x 480mm Papiereingabekapazität / Paper Infeed Capacity Standard 1.500 Bögen -  max. 4.250 Bögen Papierausgabekapazität /  Paper Infeed Capacity Broschürenfinisher FS-612 max. 2.500 Bögen Heftfinisher FS-531 max. 3.000Bögen Ausgabefach OT-502: max. 15 Bögen Abmessungen des Basissystems 760 x 903 x 1.072mm Gewicht des Basissystems 291kg Credpfozuyltjx Aptjg Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: used, Year of construction: 2019, machine/vehicle number: M01645/400/23/051/19, functionality: unexamined, power: 75 kW (101.97 HP), Schuler, Type: Eccentric press MC400, Machine No. M01645/400/23/051/19, Year of manufacture 2019, 4000 kN Technical data of the press according to the nameplate: Supply voltage: 3LNPE/400V/50Hz Control system: CCS/PNOZmulti Fuse rating: 250 A Rated power: 75 kW Rated force: 4,000 kN Work capacity: 60,000 J Max. strokes in continuous operation: 20-80 strokes/min Max. strokes in single-stroke operation: 30 strokes/min Max. clutch cycles in single-stroke operation per minute: 20 Post-travel time: 0.20 sec Min. safety distance: 322 mm Min./max. clutch pressure: 5.5/6.0 bar System pressure: 6.0 bar Stroke lengths: 40-315 mm Maximum ram adjustment: 200 mm Standard connection point of the ram: OU Max. installation space, largest stroke in UU: 750 mm Table dimensions: 3000 x 1400 mm Max. tool dimensions: 3000 x 1300 mm Max. weight of tool upper part: 2,800 kg Weight without additional equipment: 72,000 kg Strip feeding system consisting of: Credozvcgpopfx Aptog GSW Schwabe, Type: MHR 5/2000, Serial No. M 2018-01118, Year of manufacture 2019 GSW Schwabe, Type: RMA 50/79, Serial No. M 2018-01119, Year of manufacture 2019 Including hydraulic unit, enclosure, and roller conveyor GSW project no.: 2018-60420 with peripherals: - SCHÄFER lubricant supply system with tank - RAZIOL EST-10-D ELS-400, Year of manufacture 2018 - Conveyor belt - GÜTHLE ACT10F2000/2400N, Set of 2, Year of manufacture 2019 - Control cabinet Function and technical data have not been verified. Without further items/without further accessories, unless explicitly specified as part of the item. If interested, please contact us by email.

Condition: used, Year of construction: 1989, machine/vehicle number: SN: 00789901, functionality: unexamined, pressing force: 815 t, Press 1, manufacturer: Umformtechnik Erfurt GmbH, type: PKZZI 800.1/3150x1600/500E, serial number: 00789901, year of manufacture approx. 1989, 8000 kN, last service in 10/2025, machine in operation until 12/2025. Technical data of the press according to the nameplate: Csdpfozvdm Rox Aptjrg Press force max. 8,000 kN – at a distance in front of the die of 12.5 mm Press force 2,500 kN – at a distance in front of the die of 200 mm Stroke rate in idle 10 to 20 min-1 Stroke of the ram 500 mm Adjustability of the ram: 500 mm Strip feed system consisting of: Roller feed, manufacturer: GSW Schwabe, type VRMA80/78, machine no. 2011-60187, year of manufacture 2011 with reel 1 (sandwich processing), SAWAB reel, year of manufacture 2011 with reel 2, manufacturer: GSW Schwabe, type: LMHR1000/1100, no.: M2011-00171, year of manufacture 2011 with reel 3, manufacturer: GSW Schwabe, type: MHR5/1400, serial no.: M2011-00170, year of manufacture 2011 including enclosure GWS project no.: 2011-60187 with peripherals: - Conveyor belt - Raziol system Function and technical data not verified without additional items/without further accessories, unless explicitly stated as part of the item WE STRONGLY RECOMMEND PARTICIPATING IN THE INSPECTION! If interested, please contact us via email!

Condition: used, Buchformpresse / Book Forming Press Kolbus FE Crjdpfozu Dnlsx Aptjg Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: used, Year of construction: 2008, functionality: fully functional, 1 x used 72/80-page web offset printing press Manufacturer: manroland Model: Lithoman IV Year of construction: 2008 Web width: 2060mm Section length: 620mm Cylinder circumference: 1240mm Max. speed: 42,500 cph Running direction: left-to-right Description: 1 x web winder MEGTEC DLC 3200 with web feed AUROLOAD Csdpfx Aozvyxcjptorg 4 x printing units manroland with PPL and Baldwin Impact Fusion blanket washing system 1 x dampening system technotrans delta.d 400W 1 x hot air dryer Contiweb Ecoset/T 15.3m with integrated afterburner (retrofitted in 2020) 1 x ink density control system GMI ColorQuick 1 x cut register control manroland CutCon 1 x color register control manroland 1 x superstructure with 5 lay units 1 x 2nd feeder (baby feeder) 1 x folding unit PFI 5S, 2:5:5 with positive feeder and magnetic brake (MT folding) 1 x saddle stitcher Tolerans 1 x cooling unit Axima i-Cool 1 x control system PECOM-X optional: 1 x disposal line RIMA System with cutting modules RS840, cross-lay unit RS36S and RS400 robot/palletizing system

Condition: good (used), Year of construction: 1990, Bending length: 14,000 mm Column width: 10,500 mm Crsdszxwzmopfx Aptjg Control: CYBELECCNC 7000 with graphic Table width: 1,000 mm Distance between table and press beam: 1,800 mm Controlled axes: Y1; Y2; X1; X2 Control system was renewed in 2012 Total power requirement: 75 kW Machine weight approx. min.: 465 t Space requirement approx.: 14,600 x 4,200 x 7,200 mm Additional information - Distance between table and press beam: 1,800 mm

Condition: used, pressure 35 t throat 220 mm stroke 10 - 120 mm no. of strokes 120 Hub/min ram adjustment 50 mm table surface area 590 x 440 mm ram surface 460 x 160 mm total power requirement 2,2 kW weight of the machine ca. 2,5 t dimensions of the machine ca. B 0,88 x T 1,2 x H 1,95 m Features - Hydraulic clutch - Adjustable table - Base frame, height 28 cm Crsdpfx Apsykb Dqstog The following work is performed in-house: - Complete disassembly of the press, cleaning, and technical inspection - Shaft removal, crack inspection, new seals, and V-belts - New paint finish: Light Gray RAL 7035 / Gentian Blue RAL 5010 - BEKA lubrication unit + new lubrication lines - New front cover - New control cabinet with ABB safety control system and touchscreen Operated via touchscreen mounted on the front of the control cabinet, Positioning of the control cabinet (cable length) to be determined in consultation with the end customer, standard 0.8–1.0 m next to the machine, including new cabling for the press - Foot switch - Two-hand control - Current UVV inspection with braking time measurement Following the modernization, the machine is approved for manual loading operations on the open die.

Condition: excellent (used), Year of construction: 2020, New hydraulic heating platen press Manufacturer: ITALPRESSE, Type XL/6 30-13 with gold-anodized plates Touch display control system - Electric heating platens 3,000 x 1,300 mm - Total pressing force: 90 tons - Number of heating plates: 2 pcs. - Number of levels: 1 - Cylinder stroke: 350 mm - Daylight opening: 350 mm - All-around loading possible - Number of hydraulic cylinders: 6 pcs. - Cylinder diameter: 85 mm - Hydraulic unit power requirement: 3 kW - Electric heating plates made of solid hard aluminum with built-in heating wires - Heating capacity: 22 kW - High-pressure insulation plates - Working temperature: 90° C - Max. temperature: 120° C - Operating voltage: 400 V, 50 Hz - Safety specifications according to CE standard Standard equipment: - Movement of the press table with rack-and-pinion and parallel guides at 2 corners of the press table made from self-lubricating material - Electronic control unit with touch screen for machine control and monitoring - Digital timer for adjusting pressing time and automatic opening - Digital input and monitoring of pressing pressure - Digital timer for adjusting pressing time Cedjxgbxfspfx Aptorg - Digital diagnostics and fault display - Safety circuit with two-hand operation - Safety pull cord - Safety support for lower press table Accessories included: - Touch Screen TS/400 - EFC electronic flatness control - Gold-anodized heating plates (Busse) Location: Ex stock - Immediately available -