Used Fume Suction System for sale (3,105)

Condition: good (used), Year of construction: 1999, functionality: fully functional, machine/vehicle number: 641, 110v mobile extraction unit Gbedpfxowxmhxj Aabou

Condition: used, Year of construction: 1994, suction capacity: 1,300 m³/h, negative pressure: 4,800 Pa, Dust extraction unit, welding fume extractor, self-cleaning pneumatic vacuum filter by KELLER. Suitable for plasma, laser, sandblasting, soda blasting and any type of dry dust. The fan is installed after the filter on the clean air side, minimizing the risk of explosion initiation. The filter is pneumatically cleaned by compressed air pulses during operation, ensuring high device efficiency. Fan power: 3.3 kW Inlet diameter: 250 mm Capacity: 1300 m³/h Vacuum: 4800 Pa Dimensions: Gedpfjw I S Dvex Aabjbu Height: 3.00 m Width: 1.45 m Depth: 1.00 m Weight: 700 kg Stock no.: 1028

Condition: used, Year of construction: 2008, 1200 m³/h 1600 Pa 1,1 kW 24/50 V/Hz 750 x 700 x 1050 mm 90 kg - Hose arm 3 m, joints inside - Filter cartridge: dust class M - Pre-filter: baffle plate - Current type: 3Ph+N+PE The filter system ----- Gbjdpfx Aasw Tngqjbju The mobile filter system of the Cartmaster IFA type is thanks to the automatic Cleaning particularly suitable for welding work with unalloyed and alloyed steels, galvanized material and aluminum with heavy smoke development. It corresponds to the safety requirements for devices Welding fume class "W3" (high-alloy steels with alloy components > 30% Nickel-based alloy).If used as intended, the system can be used for the Recirculation mode used because the requirements for the Exceptions according to TRGS 560 are fulfilled. That special developed, dirt-dependent cleaning system ensures a good cleaning behavior of the filter cartridge, so that an optimal suction performance is guaranteed throughout the operation. The cleaned particles fall into a dust collection drawer from which they can then be disposed of. The powerful spiral fan ensures even with saturated Filter cartridges for a high volume flow. The filter media ----- A baffle serves as a pre-separator for coarse particles. The filter cartridge installed below (dust class M, degree of separation > 99%) filters the finest smoke and dust particles. The cartridge is factory coated which increases the service life. The extraction arm ----- The extraction arm can be moved with the 3 internal joints Position spring support slightly and is in the set position cantilevered. A throttle flap integrated in the extraction hood enables the Flow rate setting.

Condition: ready for operation (used), A Wolf exhaust unit for wet rooms is available. Air volume flow: 1000m³/h, pressure loss (external): 200Pa, motor power: 0.25kW, motor speed: 1500rpm. Documentation available. An on-site inspection is possible. Gjdpfx Asxc Nhtjabjbu

Condition: new, Year of construction: 2025, functionality: fully functional, All our extractors feature simple operation and possibility of quick bag replacement. Metal rotor ensures silent work. Affordable price in comparison to machine's capabilities. Godpfxovu Ryro Aabsbu Metal balanced rotor ensures vibration-free and quiet operation Quick mounting of the burlap extraction bag Stable metal construction Default equipment 8 burlap bags Technical data Suction efficiency 6800 m3/h Bag capacity 4×200 Number of bags 8 Extracting connector diameter 1×180, 4×100 mm Dimensions (L×W×H) 3560×580×2200 mm Weight 152 kg Motor power 5.6 kW Power supply 3-phase, 400V User manual yes EC declaration yes

Condition: used, Suction lifter load capacity: 220 kg System with two sliding bridges and two lifting motors. Rail length: approx. 25,500 mm System width: approx. 6,500 mm Gedpfjxcvh Tex Aabsbu Height from floor to running rail: approx. 3,700 mm.

Condition: new, Year of construction: 2022, HOLZKRAFT Raw Air Extractor ASA 7703 Mobile chip extraction system with a rotating extraction unit and four extraction nozzles (Ø 100 / 120 mm) for milling, planing, and sawdust (not for dust) Nominal flow rate: 7,700 m³/h Gjdpfx Ajwhui Asabebu Extraction nozzle outlet: 1 x Ø 100 | 3 x 120 mm Extraction nozzle inlet: 1 x Ø 260 mm Vacuum pressure: max. 2,800 Pa Filter area: approx. 11.96 m² (2 x 5.98 m²) Chip bag volume: 2 x 290 liters Power consumption: 4.8 kW | 400 V - 50 Hz Idle speed: 2,950 rpm Sound pressure level: max. 98.3 dB(A) Dimensions (L x W x H): 1,900 x 670 x 2,800 mm Net weight: approx. 88 kg Includes 2 fine filter bags and 2 chip bags Availability: Short-term Storage location: Flörsheim

Condition: good (used), Year of construction: 2002, functionality: fully functional, suction capacity: 1,300 m³/h, negative pressure: 4,800 Pa, Dust extraction, welding fume extraction, self-cleaning, pneumatic, vacuum filter KELLER VARIO T. Suitable for plasma, laser, sandblasting, soda blasting and all kinds of dry dust. The fan is located after the filter on the clean side, which reduces the risk of explosion to a minimum. The filter is pneumatically cleaned with compressed air pulses during operation, ensuring high device efficiency. Fan power: 3.3 kW Inlet diameter: 315 mm Capacity: 1300 m3/h Vacuum: 4800 Pa Dimensions: Height – 2.05 m Width – 1.02 m Depth – 1.60 m Gjdpfovu Ryljx Aabjbu Weight: 700 kg

Condition: new, Year of construction: 2025, pressure: 12 bar, Innovative dust-free sandblasters combine the power of conventional sandblasting with a vacuum system that captures all dust and removed material during work. This not only eliminates the need for extensive cleanup but also protects the operator and those around them from the harmful effects of airborne particles. Gbjdpfoupzn Eox Aabsu With a dust-free sandblaster, you can complete cleaning and surface preparation faster and more efficiently. And thanks to the intuitive controls and user-friendly design, these machines are easy to operate, even for sandblasting beginners. ✅ PR 50 Dust-free Sandblaster With its versatile application capabilities, the PR 50 can handle a wide variety of surfaces, from hard metal to delicate glass. Our PR 50 is an excellent choice for those working in the automotive, construction, or cleaning industries, to name a few. Its compact size and handy design make it easy to operate and transport, even for those new to sandblasting.

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, DFPRO6-Cyclo 400-600 volt 7.5 kW 2007 Price €5,000 DFPRO16-Cyclo 400-690 volt 18.5 kW 2008 Price €7,000 3DFP9-SPRK 3x400 volt 11 kW 2018 Price €12,000 2DFP6 3x400 volt 7.5 kW 2018 Price €10,000 Can be inspected under power due to insolvency Gbjdexcgw Sepfx Aabsu

Condition: new, Year of construction: 2025, functionality: fully functional, All CORMAK company extractors feature easy operation and quick bag replacement. Wheeled base ensures portability. Extractor's quiet and failure-free operation is provided by a metal rotor. Affordable price with high efficiency. Metal balanced rotor ensures vibration-free and quiet operation Quick mounting of burlap extraction bag Portability due to 4-wheel base Stable metal construction Default equipment Metal wheeled base 4 burlap bags Optional equipment Galvanised clamping ring 2-micron filter cartridge Technical data Suction efficiency 3900 m3/h Bag capacity 220 L Number of bags 4 Extracting connector diameter 1×150, 3×100 mm Gbjdpfx Aaovu A Diebsu Dimensions (L×W×H) 1200×570×2250 mm Weight 64 kg Motor power 2.2 kW Power supply 3-phase, 400V User manual yes EC declaration yes

Year of construction: 2012, condition: like new (used), Looking for a reliable cutter suction dredger that can handle a variety of dredging projects? Our used Cutterdredger, built in 2012, might be just what you need. With a length of 12 meters and a maximum dredging depth of 10 meters, this vessel is equipped with 2 hydraulic spuds, a 12-cylinder Detroit engine with only 400 hours, and a Volvo engine type TAMD121C for the hydraulics. The Warman dredge pump 12/10 (300/250mm) ensures efficient material transport. Our Cutter suction dredger is designed to operate by using a rotating cutter head to break up sediment, mud, and other materials from the bed of waterways and bodies of water. The suction pipe then transports the material to a discharge location. This type of vessel is ideal for a range of applications, including port construction and maintenance, the creation of artificial islands and beaches, deepening navigational channels, and mineral extraction. Our Cutterdredger can be customized based on the dredging depth, working capacity, and discharge distance, with capabilities ranging from 15 meters in dredging depth and a maximum flow rate of 6000 cubic meters per hour. With its compact size and efficient performance, this cutter suction dredger is perfect for a variety of dredging projects. Don't miss your chance to own this reliable used Cutterdredger, built in 2012. Contact us today to learn more about this vessel and how it can help you complete your next dredging project. Godjhf Ncujpfx Aabsbu

Condition: new, Year of construction: 2022, HOLZKRAFT Raw Air Extractor ASA 7703 Mobile chip extraction system with a rotating extraction unit and four extraction nozzles (Ø 100 / 120 mm) for milling, planing, and sawdust (not for dust) Nominal flow rate: 7,700 m³/h Extraction nozzle outlet: 1 x Ø 100 | 3 x 120 mm Extraction nozzle inlet: 1 x Ø 260 mm Vacuum pressure: max. 2,800 Pa Filter area: approx. 11.96 m² (2 x 5.98 m²) Chip bag volume: 2 x 290 liters Power consumption: 4.8 kW | 400 V - 50 Hz Idle speed: 2,950 rpm Gbsdpewhui Njfx Aabju Sound pressure level: max. 98.3 dB(A) Dimensions (L x W x H): 1,900 x 670 x 2,800 mm Net weight: approx. 88 kg Includes 2 fine filter bags and 2 chip bags Availability: Short-term Storage location: Flörsheim

Condition: used, Year of construction: 2011, filter area: 418 m², suction capacity: 14,000 m³/h, negative pressure: 3,600 Pa, Dust extraction, welding fume extraction, self-cleaning, pneumatic, vacuum cartridge filter for plasma, laser, sandblasting, soda blasting, shot blasting and all types of dry dust. Brand: VALCO Godpfx Aewiuaqoabjbu Model: PPX-18-W3 Thanks to the W3 approval, the filter in this version can be used when welding high-alloy steels. The filter is cleaned with compressed air pulses during operation, which ensures high efficiency of the device. The fan is on the clean side, which reduces the risk of explosion to a minimum. Parameters : Efficiency - 14000 m3/h Negative pressure - 3600 Pa Filtration area - 418 m2 Cartridge filter inserts - 18 pieces Fan - 15 Kw Inlet diameter - 450 mm total length - 2.80 m total width - 1.35 m height - 4.00 m Device from 2011 Full technical documentation available. There are 2 pieces of this device available. Stock no.: 0986 1/2

Condition: new, Year of construction: 2025, functionality: fully functional, Our powerful "MM 2010" sandblasting cabinet uses a pressure blasting process and, thanks to its innovative media recirculation system, is suitable for all types of blasting media. Thanks to the bucket elevator permanently connected to the cabinet, even the heaviest types of blasting media, such as stainless steel, cast steel, and other metallic media, can be used without any problems. Unlike competing systems, the blasting media is not sucked back into the cabinet, but rather transported to the adjacent bucket elevator via a flat conveyor system. The bucket elevator conveys the material upwards and throws it into the cyclone separator, where the blasting media is cleaned and returned to the blasting process. Our specially developed media recirculation recycling system ensures continuous media flow, regardless of the extraction system's suction power. Thanks to the media recirculation system and the innovative fan technology, the blasting cabinet has very low energy requirements (0.75 kW fan motor). Since the blasting material is not sucked back in, no oversized extraction system with high power consumption is required (as with many competitive systems). To achieve maximum blasting performance, the "MM 2010" pressure blasting cabinet is equipped with a 60-liter pressure blasting tank. This is equipped with a pressure regulator for continuously adjusting the blasting pressure from 0.1 to 12 bar. For safe operation, a water separator is permanently mounted on the blasting tank, protecting the blasting media from moisture. The pressure blasting nozzle is made of highly wear-resistant boron carbide and allows a service life of up to 1,000 hours, depending on the blasting media used. The blasting chamber is equipped with a wear-resistant rubber lining, which increases the service life of the blasting media and protects the blasting cabinet from wear. An air blow gun is installed for cleaning the blasted workpieces and blowing off the cabinet walls. The permanently installed cartridge filter extraction system ensures optimal visibility in the blast chamber and maximum abrasive service life. The extraction system features continuous cleaning of the filter cartridges using compressed air blasts. This ensures a long service life of the filter media and consistently consistent extraction performance. The blast chamber is loaded via an angled front flap that swings completely upwards. This allows the blast cabinet to be loaded using a forklift or crane. The sturdy work grate can support a maximum load of 500 kg. To ensure optimal visibility in the blast chamber, two powerful and energy-saving LED lights are mounted on the cabin roof. Their roof-mounted design protects them from dust and wear. The system is operated via a modern touchscreen display. To ensure safe operation of the blast cabinet, the blast cabinet is equipped with a door safety switch. The installed viewing windows are made of toughened safety glass and are provided with a wear-resistant film. Gsdpfxjwc Nrnj Aabebu

Condition: new, functionality: fully functional, Year of construction: 2025, All CORMAK company extractors feature easy operation and quick bag replacement. Wheeled base ensures portability. Extractor's quiet and failure-free operation is provided by a metal rotor. Affordable price with high efficiency. Metal balanced rotor ensures vibration-free and quiet operation Quick mounting of burlap extraction bag Portability due to 4-wheel base Stable metal construction Standard equipment Metal wheeled base 4 burlap bags Optional equipment Galvanised clamping ring 2-micron filter cartridge Technical data Suction off efficiency 3900 m3/h Bag capacity 150 L Number of bags 4 Extracting connector diameter 1×150, 3×100 mm Dimensions (L×W×H) 1400×570×1960 mm Gsdpjvu Artefx Aabjbu Weight 64 kg Motor power 2.2 kW Power supply 3-phase, 400V User manual yes EC declaration yes

Year of construction: 2022, operating hours: 0 h, condition: new, A highly efficient sand mining dredger with a production capacity of 450 m3/hour is available for new build. This dredger is powered by a Doosan engine (150 kW), and an outer diesel-driven engine can also be used. It can dredge up to 15 meters deep and comes equipped with four hydraulic winches, a water jet pump system, and 150-meter discharge pipes. The dredger's main pontoon dimensions are 6x2x1 meters, and the side pontoons are 11.50 meters long. It is designed for use in shallow waters such as rivers, lakes, channels, docks, and similar environments, making it ideal for cleaning reservoirs, sand stocks, mining arrays, piers, and harbors, particularly when the sand layer is soft. This dredger is easy to transport as it can fit into a single 40ft container. In addition to building new equipment, we also have used machines in stock. Contact us with your project, and we will recommend the best solution for you. Gedeh Ayk Ajpfx Aabebu

Condition: used, Year of construction: 2003, filter area: 143 m², suction capacity: 6,000 m³/h, Dust extraction, welding fume extractor, self-cleaning cartridge filter, pneumatic, vacuum extraction for plasma, laser, sandblasting, soda blasting, shot blasting, and all types of dry dust. The filter is cleaned pneumatically by compressed air pulses during operation, ensuring high efficiency of the unit. The fan is located on the clean side, reducing the risk of explosion to a minimum. Brand: Donaldson Torit DCE Model: DF+6-Cyclo Year of production: 2003 Filter cartridges – 6 pcs. Filtration surface area: 143 m² Fan power: 7.5 kW Capacity: 6000 m³/h Inlet diameter: 300mm/250mm We also offer, on order, new filter cartridges tailored according to the device's application. Dimensions: Height – 3.05 m Width – 1.85 m x 2.35 m Stock number: 0989 Gbedpfxew I Av No Aabsu

Condition: new, Year of construction: 2025, functionality: fully functional, New, FM230-L1 low-noise vacuum extractor. Large design and powerful vacuum allows for removing sawdust and chips from machines and floors. Machine features Extractor with a powerful vacuum (horizontal system rotor) Metal, balanced rotor Strengthened motor Workplace vacuuming capability Large bags capacity Gedpfovu A Easx Aabjbu Wide suction nozzle in the set Portable due to large wheels Ergonomic handle for machine manoeuvring Quiet work, high efficiency Due to its small size it doesn't take a lot of space in the workshop Many years of our team's effort resulted in creating a WhirlWind series multi-wing metal rotor, which, along with the rigid metal body, constitutes the heart of the extractor. Vacuum air-flow perfectly sucks out excess amount of sawdust produced during machining wood. Large design of the extractor is equipped with a solid frame providing stability and vibration-free operation. Entire construction is also strengthened with appropriately thick supports, which hold the cylinders along with the weight of the waste bags in proper position. Another advantage is the usage of an elastic and durable gasket, located in the integral part of the machine in order to improve the tightness of the entire system. By default, our extractors are equipped with burlap (filtering and waste) as well as additional, disposable, durable, plastic waste bags. Elastic metal bands ensure long-term reliable bags replacement. Usage of rotary wheels in bearings provides quick relocation of the machine. Technical data S1 continuous work motor power 0.75 kW Speed 2800 rpm Suction efficiency 1150 m3/h Bags capacity 90 L Number of bags 2 Extracting connector diameter 100 mm Height 1550 mm Width 420 mm Length 800 mm Voltage 230V Weight 27 kg

Condition: new, power: 161.81 kW (220.00 HP), fuel type: diesel, Year of construction: 2024, For Sale: High-Performance NEW BUILD Dredger Perfect for Dredging in Marinas, Harbours, Sand & Gravel Mining Are you looking for a reliable floating dredger to meet your dredging needs? This high-efficiency with low cost suction dredger is ideal for a wide range of applications, including marinas, harbours, and mining operations. Key Features: Powerful Suction System: Ideal for dredging sand, gravel, slurry, and more. Versatile Applications: Perfect for clearing harbours, marinas, and inland waterways. Durable Construction: Built for long-term use in harsh marine environments. Efficient Operation: Maximize productivity in mining and excavation projects. Specifications: Dredging depth: 10 mtr (can be customized to 15 mtr dredging depth) Pump capacity: 450m3/h Engine power: 220hp Suction pipe diameter: DN200 Whether you're managing a marina, expanding a harbour, or working on a sand and gravel mining project, this suction dredger provides the performance and reliability you need. Gsdpfxou Afi Ij Aabebu We design and build new dredging equipment, and we also have used dredgers on stock. Contact us today for pricing and more details!

Condition: used, Year of construction: 2005, filter area: 126 m², suction capacity: 6,000 m³/h, Dust extraction, welding fume extraction, filtration ventilation, self-cleaning pneumatic vacuum dust collector, absorber for plasma, laser, sandblasting, and all types of dry dust. Donaldson Torit model: TDP 1350 Cartridge filter elements are pneumatically cleaned during operation with compressed air pulses, ensuring high device efficiency. The fan is positioned after the filter on the clean side, reducing explosion risk to a minimum. Gbsdpow Hrxfofx Aabsu Year of manufacture - 2005 Fan power 7.5 kW Capacity 6000 m3/h Filtration surface area 126 m2 Inlet diameter - 315 mm Donaldson Ultra WEB filter cartridges – 6 pcs. Stock no.: 1026 Height - 3.80 m Width - 1.32 m Depth - 1.36 m Base: 1.25 m x 1.25 m

Condition: new, Year of construction: 2025, functionality: fully functional, All our extractors feature easy operation and a possibility of quick bag replacement. Wheeled base ensures portability. Metal rotor ensures silent and failure-free extractor operation. Affordable price in comparison to machine's efficiency. Metal balanced rotor ensures vibration-free and quiet operation Quick mounting of the burlap extraction bag Stable metal construction Default equipment Gsdpfx Asvu Rx Isabjbu 6 burlap bags Technical data Suction efficiency 4860 m3/h Bags capacity 3×200 L Number of bags 6 Extracting connector diameter 1×180, 4×100 mm Dimensions (L×W×H) 2355×590×2150 mm Weight 125 kg Motor power 3.8 kW Power supply 3-phase 400V User manual yes EC Declaration yes

Condition: used, Year of construction: 2012, filter area: 80 m², suction capacity: 10,500 m³/h, negative pressure: 3,800 Pa, Welding fume extractor, dust extraction unit, self-cleaning pneumatic vacuum filter by ULMATEC. Suitable for welding, grinding, sandblasting, and all types of dry dust. Equipped with cartridge filter elements. The filter is pneumatically cleaned by compressed air pulses during operation, ensuring high device efficiency. Gedpow Hrnmefx Aabjbu Designed for continuous operation. Brand: ULMATEC Model: IRF 80-4-4/7.5 MD Year of manufacture: 2012 Fan power: 7.5 kW Maximum capacity: 10,500 m3/h Maximum vacuum: 3,800 Pa Filtration surface: 80 m2 Stock No.: 0950

Condition: new, Year of construction: 2025, functionality: fully functional, A powerful, 2.8 kW and 5000 m3/h efficiency, sawdust extractor. Includes burlap filter bags. Machine description FM500 sawdust extractor is an efficient device of high vacuum power. Stable metal design and balanced rotor create a machine useful in any workshop. Burlap filter bags with up to 5 micron diameter filtering. Equipped with a splitter which allows up to 4 machines to be connected simultaneously. Maximum efficiency achieved when connected to 3 machines. FM500 features Metal balanced rotor Quick fixture of burlap bags Portable wheeled base Stable, metal design Bag holders High vacuum power Strong, 3-phase motor Capable of connecting up to 4 machines simultaneously Constant suction efficiency Technical data S1 motor power 2.8 kW Voltage 400V / 50Hz Motor rpm 2950 rpm Total dimensions 1525 x 560 x 2460 mm Gbedpfx Aajvu Aqpebju Efficiency 5000 m³/h Vacuum up to 2500Pa Air suction speed up to 31 m/s Filtration bags burlap (II filtration degree) Volume of bags 480L Diameters of connectors 200 mm / 4 x (ø 100 mm) Weight 64 kg

Condition: new, Year of construction: 2025, functionality: fully functional, Vacuum air-flow perfectly sucks out excess sawdust produced during machining wood. Extractor equipped with an extracting connector rotary 180°. Machine features For chips from milling machines, planers and saws High suction power Easy relocating due to the drive system Rotor and metal body Quick attachment system for filter and bag Extracting connector can be rotated 180° simplifying attaching suction hoses Technical data Engine 1.5 kW/400V Speed 2850 rpm Bags capacity (Diameter / Length) 190 L (500 mm / 1100 mm) Gbjdovu Aykopfx Aabou Maximum efficiency 3200 m3/h Intake connector 150 mm/ 3×100 mm Rotor diameter 300 mm Dimensions 985×560×2210 mm Weight 45 kg