Used Fume Suction System for sale (41,704)

Condition: excellent (used), Zeiss stylus kit in very good condition Guodpfx Akjurlqcsaeg

Condition: good (used), Mobile shelving / sliding shelving system DEXION Manufacturer: DEXION Number of shelving units: 3 double-sided, 1 single-sided Permissible shelf load / floor load: 235 kg (91 kg on average) Gsdpfx Akjzt Rpgjajug Permissible field load: 730 kg Maximum cart load: 5,840 kg Number of shelves stacked on top of each other: 8 units Evenly distributed permissible load

Condition: used, Board stacking system Roller conveyor Cross chain conveyor Board hill Packer Pack elevator Designed for boards up to 6 m long Guedpez Anp Nsfx Akaog

Condition: used, machine/vehicle number: 007802, Max. panel width: 800 mm Max. panel length: 2000 mm Gjdpfsxn Nf Nox Akaoug Length of conveyor: 8320 mm Panel return for edgebander: Left

Condition: used, machine/vehicle number: 007646, Max. panel width: 1200 mm Max. panel length: 2400 mm Panel return for edgebander: Left Gsdevbtp Aepfx Akaoug

Condition: used, machine/vehicle number: 007905, Max. panel width: 1200 mm Gusdpfx Ajy Nkrpjkaeg Max. panel length: 2500 mm Length of conveyor: 13800 mm

Condition: used, machine/vehicle number: 007723, Max. panel width: 900 mm Length of conveyor: 11000 mm Panel return for edgebander: Right Gujdpjy Nkyysfx Akaog

Condition: used, machine/vehicle number: 008245, Max. panel width: 1000 mm Max. panel length: 2500 mm Length of conveyor: 11500 mm Gusdoywad Repfx Akajg Panel return for edgebander: Left

Condition: used, machine/vehicle number: 008106, Max. panel width: 900 mm Max. panel length: 2500 mm Gedpfx Aksy Dq Hcsasug Panel return for edgebander: Right

Condition: used, machine/vehicle number: 007986, Max. panel width: 1000 mm Max. panel length: 2000 mm Gujdox A Tggepfx Akajg Length of conveyor: 3500 mm Panel return for edgebander: Right

Condition: used, machine/vehicle number: 008147, Max. panel width: 1100 mm Max. panel length: 2500 mm Length of conveyor: 8100 mm Gedsxqm Hispfx Akaeug Panel return for edgebander: Right

Condition: used, machine/vehicle number: 007849, Max. panel width: 1000 mm Max. panel length: 2200 mm Length of conveyor: 9000 mm Gujdpfx Aowkfzzjkaog Panel return for edgebander: Right

Condition: used, machine/vehicle number: 007234, Max. panel width: 900 mm Max. panel length: 1200 mm Length of conveyor: 8000 mm Panel return for edgebander: Left Gsdpfx Aewlpnnokaoug

Condition: used, machine/vehicle number: 008661, Panel return for edgebander: Left Gsdpfx Akjzmmtzoasug

Condition: used, machine/vehicle number: 005107, Stock dimension length: 18800 mm Gusdpfxsiiipuo Akasg Stock dimension width: 15000 mm

Condition: used, machine/vehicle number: 007514, Position 1: Roller Conveyors IMA-COMBIMA SYSTEM I Position 2: bordatriceLottoUno IMA-COMBIMA SYSTEM I Position 3: Roller Conveyors IMA-COMBIMA SYSTEM I Position 4: bordatriceLottoUno IMA-COMBIMA SYSTEM I Position 5: Roller Conveyors IMA-COMBIMA SYSTEM I Position 6: bordatriceLottoUno IMA-COMBIMA SYSTEM I Gujdpfowukznex Akajg Position 7: Roller Conveyors IMA-COMBIMA SYSTEM I Position 8: bordatriceLottoUno IMA-COMBIMA SYSTEM I Position 9: Roller Conveyors IMA-COMBIMA SYSTEM I

Condition: used, machine/vehicle number: 006200, Max. panel width: 800 mm Max. panel length: 2000 mm Length of conveyor: 5700 mm Panel return for edgebander: Left Guedpfoy Nkxijx Akasg

Condition: used, machine/vehicle number: 008210, Max. panel width: 1000 mm Max. panel length: 2500 mm Length of conveyor: 10000 mm Panel return for edgebander: Right Guodex A Thwjpfx Akasg

Condition: used, machine/vehicle number: 006621, Max. panel width: 1500 mm Gsdpfx Akjtvrfgsasug Max. panel length: 2200 mm Length of conveyor: 13500 mm Panel return for edgebander: Left

Condition: used, Traffic light system, construction site traffic light, traffic signal system, mobile traffic light system, traffic light -Handover: in its current condition as inspected Gedpexywimjfx Akasug Accessories: without controller, without battery and other accessories -Manufacturer: nissen, mobile traffic light system / 2 traffic lights on battery-powered cart Price: 2 pieces complete -Dimensions: 800/600/H2800 mm -Transport dimensions: 1400/800/H1400 mm -Weight: 44.5 kg/pc.

Condition: used, Year of construction: 2009, functionality: fully functional, total width: 4,300 mm, total length: 3,700 mm, total height: 3,000 mm, Description For sale is a Tonello Laser Blaze 250 industrial laser finishing system, offered as a complete enclosed workstation. This high-performance system is specifically designed for laser-based garment finishing, enabling precise and repeatable effects such as denim fading, whiskering, engraving, and decorative surface treatments. The Laser Blaze series by Tonello S.r.l. is widely recognized in industrial denim production, offering a modern and sustainable alternative to traditional manual processes. The system utilizes a Rofin CO₂ laser source, known for its precision, stability, and reliability in continuous production environments. This unit replaces labor-intensive finishing methods such as hand-scraping, sandblasting, and chemical spraying, significantly improving consistency, efficiency, and environmental impact. The machine has been used in a professional garment factory environment and has been tested in operation with video documentation (March 2026). Recently serviced on 27.02.2026. Includes • Tonello Laser Blaze 250 enclosed laser cabin • Integrated laser processing unit • Computer workstation with control system • Electrical cabinets • Cooling unit (MTA) • Ventilation / exhaust connections • Operator control panel and integrated safety system Technical Details • Manufacturer: Tonello S.r.l., Italy • Model: Laser Blaze 250 • Laser source: Rofin CO₂ • Year: 2009 • Power: approx. 30 kW system • Voltage: 400V, 3-phase • Work area: approx. up to 150 × 150 cm • Application: Denim laser finishing and garment treatment Key Features • High-precision CO₂ laser technology for consistent results • Advanced control via Tonello CREA software • Capability for both flat and 3D (mannequin-based) processing • 360° garment effects without flat-pattern limitations • Double-position workflow for improved productivity • Fully enclosed workstation with integrated safety systems Technical Capabilities • Denim distressing (whiskers, chevrons, worn effects) • Laser engraving of logos, graphics, and textures • Photorealistic surface patterning • Multi-material capability (denim, leather, technical textiles) • High repeatability – identical results from first to last garment Sustainability Benefits • Eliminates need for sandblasting and manual abrasion • Reduces water and chemical consumption significantly • Lower energy usage compared to traditional laundry processes • Improves worker safety and production cleanliness Condition Guedpfx Akjy Ai Ehsajg Used industrial condition. Machine is complete and was operational prior to factory shutdown. Tested and video recorded in operation (05–06.03.2026). Recently serviced (27.02.2026). Typical signs of use from production environment. Inspection possible prior to dismantling. Sold as-is, where-is, without warranty. Typical Applications • Denim laser fading and whiskering • Garment engraving and marking • Decorative textile finishing • Replacement for manual sandblasting processes Location: Valga, Estonia Removal & transport: Buyer responsible for dismantling, loading, and transport. Professional dismantling strongly recommended due to system size and complexity.

Condition: good (used), Year of construction: 2009, functionality: fully functional, machine/vehicle number: 75080154.1/TKT 2, type of input current: three-phase, input voltage: 400 V, input current: 40 A, 30 C – FINN-CONVEY V307 Conveyor 3-Level Table System – Modular Cutting Room Conveyor Description For sale is a FINN-CONVEY V307 conveyor 3-level table system designed for textile cutting room operations. This system functions as a modular conveyor-based table solution for material handling and fabric movement within production. It enables efficient workflow between spreading, buffering, inspection, and cutting stages. The system has been operated as part of a fully integrated cutting line together with a Lectra Vectorfashion VT-FA-Q2-72 (unit 35 C). This integration significantly reduces manual handling and downtime, especially during fabric roll changes and feeding operations. The video material also shows a GERBER XLS-125-180-L Spreader (unit 32 C), which was used in the same production line. The equipment has been used in a professional garment factory and was operational prior to factory shutdown. Recently serviced on 27.02.2026. Includes • FINN-CONVEY V307 conveyor table system • Multi-level conveyor structure (3 levels) • Integrated belt transport system • Drive motors and transmission units • Sensor components for positioning and control • Electrical control cabinet Technical Details • Manufacturer: Finn-Convey • Model: V307 • Type: Conveyor table system • Application: Fabric handling and transport in cutting rooms • Configuration: Multi-level modular system • Levels: 3-level buffer structure • Power: Industrial 3-phase system Key Advantages • Full integration with automated cutting systems (Lectra line ready) • Reduced manual labor in fabric feeding and handling • Continuous material flow for optimized cutting efficiency • Modular system adaptable to different production layouts • Industrial-grade mechanical construction for long service life Production Efficiency The 3-level buffer structure allows continuous operation of the cutting machine by maintaining a constant material supply. This reduces idle time and enables • Higher throughput in cutting operations • Efficient batch handling • Improved workflow synchronization across production stages Build Quality Finn-Convey systems are known for their robust mechanical construction, designed for long-term industrial use. Gsdpey Akpzofx Akasug With proper maintenance, these systems are built to operate reliably for decades. Condition Used industrial condition Fully functional prior to shutdown Typical signs of use from production environment Inspection possible prior to dismantling Sold as-is, where-is, without warranty Typical Applications • Cutting room conveyor systems • Fabric transport and handling • Workflow optimization in garment production • Textile production lines Location: Valga, Estonia Removal & transport: Buyer responsible for dismantling and transport Professional dismantling recommended due to system size

Condition: used, DEMAG Ergotech System 650/1000-3300 with 6,500 kN clamping force and 3300 Euromap injection unit, equipped with a 2021 Wittmann W843 pro robot featuring servo B axis 270° and servo C axis 180°. The machine delivers 1,600 g shot weight through an 80 mm screw, supported by 4 hydraulic core pulls, 8 cascade circuits, and 16 hot runner zones for complex multi-component and technical moulding. CNC CONTROL Controller: Demag Ergocontrol CLAMPING UNIT Clamping force kN: 6.500 Tie-bar clearance (H x V) mm: 1.000 INJECTION UNIT Gsdezz S Uajpfx Akasug Injection unit size (Euromap): 3300 Screw diameter mm: 80 Max. shot weight (PS) g: 1.600 MOULD FUNCTIONS & HANDLING Hydraulic core pull circuits: 4 Cascade / valve gate circuits: 8 Hot runner control zones: 16 Handling robot (model / year): Wittmann W843 pro (2021) Robot strokes X / Y / Z mm: 1.200 / 2.000 / 3.000 Robot rotary axes (B / C): C servo 180° / B servo 270° DRIVE Max. hydraulic pressure bar: 190 Mains connection V / Hz / A: 3 x 400 / 50 / 241 + 108

Year of construction: 2026, condition: new, machine/vehicle number: AT111, New UHT tubular strilizer, homogenizer, CIP system for milk & cream - 10.000 LhTechnical Specifications & Performance DataThis tubular indirect UHT sterilizer is engineered for dairy processing with variable-speed operation and high thermal efficiency. It delivers dependable ultra-high-temperature treatment for milk and 40% fat cream with robust heat recovery and precise temperature control across each process stage.Capacity: Milk 10,000 L/h; Cream 40% fat 5,000 L/hHeat exchanger: Tubular, corrugated AISI 316 stainless steel tubesProduct inlet temperature: 8°CHomogenizing temperature: about 65–75°C (intermediate outlet available)Holding temperature: 90–95°CSterilization temperature: 135–142°C for 4 sOutlet temperature: about 20–25°CHeat regeneration: about 70% on tubular exchangerThermal profile: Heating 5→115°C (pressurized hot water at 132°C), Sterilization 115→142°C (industrial steam ~6 bar), Cooling 142→27°C (water at 17°C), Final cooling 27→25°C (water at 17°C)Balance tank: 200 L, vertical cylindrical, AISI 304 stainless steel, with 3 level probes and CIP spray ballProduct pump: Stainless steel centrifugal, special high-temperature mechanical seal, operating pressure 5–10 barElectromagnetic flow meter: Flanged, 4–20 mA outputHot water circulation group: High-efficiency pump, 14–16 bar, 10,000 L/h; stainless steel expansion vessel; safety valve; automatic refill; steam–water tubular heat exchangerTemperature regulation: Pneumatic modulating steam valve; high-efficiency steam trapOn-board CIP: Conductivity measurement, 2 chemical dosing pumps, 2 x 150 L AISI 304 tanks (acid and caustic)Construction: Pre-assembled on AISI 304 stainless steel skid with adjustable leveling feetAdvanced Automation & Control SystemsThe system is equipped with a modern automation platform to ensure stable UHT processing, traceability, and consistent product quality.Control architecture: Integrated PLC with a 12-inch HMI touch screenCabinet layout: Two AISI 304 stainless steel enclosures (electronics and pneumatics separated)Electronics cabinet: PLC, HMI, power and automation componentsPneumatics cabinet: Solenoid valves and air distributionAutomated functions: CIP cycle management, pasteurization/sterilization control, temperature regulation, alarm handling, safety interlocksProcess data logging: Continuous monitoring of temperatures, product pressure, holding time, and flow rateInstrumentation: Electromagnetic flow meter with 4–20 mA output for robust feedback controlProduction Line Integration CapabilitiesDesigned for seamless integration into dairy processing, beverage production, and industrial packaging en... Gedpfx Akezmpznsaoug

Condition: new, Year of construction: 2026, functionality: fully functional, spindle speed (min.): 12,000 rpm, spindle speed (max.): 36,000 rpm, High part output | 3D CNC milling for small workpieces up to 1000 x 800 x 400 mm. Gsdpex S Etmjfx Akajug > Efficient milling spindle, short throughput times and high part output: Due to the highly efficient milling spindle, the 5-axis CNC machine creates a high part output. The CNC milling machine stands for absolutely fast production processes and short throughput times. In addition, the rotary table of the CNC milling machine performs the C-axis movement, making milling even more effective. > Little space required, fast commissioning: The RT-F 1400 CNC milling machine requires little space and can be commissioned within two days. Set-up times are minimal. The CNC machine can be easily moved to another location using a forklift. > First-class contour accuracy for 3D machining with fixtures: All components, such as milling tool, spindle and the machine are matched to each other and to the desired component. A fixture from HG GRIMME SysTech can additionally influence the milling quality. Existing fixtures can be reused at any time. > Use in industry and small businesses: The CNC rotary table milling machine RT-F 1400 is particularly suitable for 3D machining of smaller components (800x1000x400mm). The CNC milling machine is used just as successfully by large industrial companies, such as the automotive industry, as it is in small businesses. > Basic version of the CNC machining center - Protective cabin with automatic gate unit, pneumatic - Swiveling, integrated control panel - High-performance CNC control NUM Flexium+ with nPad and 19'' monitor - Tool changing system with 12 places, dust-tight - Tool measurement Renishaw-TS 27 R - chip tray, vacuum pump > 365 further equipment options - example CFK package The machine can be equipped with many further options. One example is the upgrade of the machine equipment for CFRP machining. The CFRP package takes into account many safety aspects that are necessary for the processing of composite material. We offer around 365 additional options across our entire product range and can further equip the basic machine offered at any time. > Suitable materials for the 5-axis CNC rotary table milling machine 1400: plastics, composites such as CFRP, model making materials, aluminum. Further technical data Cube dimensions component - 1000 x 800 x 400 mm (+162 mm substructure) Travels X/Y and Z - X/Y and Z: 1,040 x 1,400 mm x 725 mm Travels of rotary axes A and C - Rotary axis C (table) ± 1,080°. - Swivel axis A, standard tool spindle with tool changing system ± 110°. Speeds - Rapid traverse linear axes X/Y/Z 40/40/30 m/min - Rapid traverse rotary axes A/C 14,000°/18,000° m/min Accuracies - Positioning accuracy ± 0.040 mm - Repeat accuracy ± 0.035 mm Machine rotary table - ø 800 mm Table load - approx. 200 kg Milling spindle - High-frequency milling spindle 9 kW (S6) - High frequency milling spindle 8 kW (S1) - speed 36.000 rpm - Tool holder HSK 40 E Machine weight - approx. 3000 kg Already included special equipment - Head suction for floating dust and chips - Interior with perforated footboards - interior lighting - Ethernet and remote maintenance - 3D spline - Connection T-Box (nPad) (subject to change without notice)