Used Fume Suction System for sale (40,092)

Condition: excellent (used), functionality: fully functional, Year of construction: 2018, machine/vehicle number: DN4462 / 4520, 1 Schmalz – Column-swiveling crane with extension + Vacumaster Comfort Window The crane is available in 2 identical units!!! Load capacity at full extension: 200 kg Schmalz swiveling crane SK-KZG-CON (extending crane) load capacity 200 kg with suction lifter VM-Comfort-H-CON Suction cup diameter: 37 cm! Load capacity: 150 kg Year of manufacture: 2018 Overall height: approx. 3.35 m, reach: approx. 3.1 m + 1 m extension = 4.1 m Distance from the base to the upper boom: approx. 2.63 m Distance from the base to the upper boom: approx. 2.42 m Hook height, chain hoist: approx. 2 m Maximum height of suction lifter in the center: 1.7 m Base plate: 50 x 50 cm Total weight: approx. 400 kg Connection: 400 V, 16 A, swiveling range: 270° The crane is disassembled and packed on a pallet. The item is located in 75053 Gondelsheim. Only the crane system shown in the pictures is being sold. Kjdpfozvrcaox Ab Hedr Very good condition, almost like new. See pictures. Shipping by freight forwarder or collection by appointment.

Condition: like new (used), Year of construction: 2021, functionality: fully functional, HORIZONTAL WRAPPER GSP 55 S for sale! Machine condition: like new, used only in a showroom for demonstration purposes. The machine is supplied as follows: - Cantilever main frame and guards manufactured in anticorrosive steel plates painted RAL 9007, machine on adjustable feet. - 2.000 mm length infeed conveyor with stainless steel product contact surfaces (AISI 304); - Quick replaceable plastic pushers suitable for food use. Kjdpfx Aboy Tlc Do Hjdr - Longitudinal sealing unit, made by three sets of fin wheels: the first one cold, diam 100 mm to pull the film, the second one heated, diam 100 mm to seal the film; the third one cold and conical, diam 60 mm, used to drive the film; film cooling air blow. - First set of wheels opening through touch screen - Pneumatic opening of heated wheels by machine stop - Easy opening of deck plates over fin seal without any tools - 190 or 270 mm one up jaw width, rotating one with inclined knife and transversal or longitudinal welding pattern. - Safety device fitted onto the cross welding unit Motorization: - Multi-axes drive technology with : - n. 1 brushless motor for the infeed conveyor control - n. 1 brushless motor for the back seal rollers control - n. 1 brushless motor for the transversal sealing unit control - n. 1 dc brushless motor for the outfeed conveyor control - Cantilever single reel film holder for 520 mm film width, with expansion blades pneumatically activated to hold the film reel - 1.000 mm powered out-feed belt - Machine stop in phase with open cross sealing jaws. - Safety covers manufactured in anticorrosive steel plates painted RAL 9007, with safety micro-switches - Electrical cabinet - Control panel equipped with: - start button for continuous run - reset button - e-stop button - positional stop button - power presence led - 7” touch screen display with following functions: - speed setting-up - bag length setting-up - sealing units temperatures setting-up - product phase - sealing jaws speed - (possibility of storing up to 100 programs) - One fixed or adjustable forming box - Set of spare parts. - Machine in left hand execution: products are loaded from the left side and are discharged to the right. (Right hand execution upon request). - Machine manufactured according to the latest CE regulations. Machine is equipped with following additional options: Main frame and infeed conveyor in stainless steel execution Gear shift on electronic machines (up to GSP 65 EVO) Photocell for print reg. film for electronic machine Product support on infeed conveyor (up to GSP 65 EVO) Each additional meter of products carrying plates (for GSP 600 EVO, GSP 600 EVO BB e GSP 75 EVO) 1.000 mm stainless steel infeed conveyor extension Provision for printer No product - no bag photocell Motorised film unwinding with Brushless motor Motorised cross jaws H adjustment Pre-heating film Two-up jaws Removable sealing jaw Cantilever sealing jaw Reel holder for 720 mm film width Double self-supporting reel holder Air blow to reject empty/double or spliced packages Adjustable pusher drop-down position Gusseting device (rotary type) Handwheel for film reel holder centering Pre-cutting unit for rotary machines Two-up jaws extra cost - Pre-cutting unit for rotary machines

Condition: like new (used), For industrial use, tumbler loading systems are commonly utilized across various industries such as the food industry (especially bakery and meat processing), pharmaceutical industry, chemical industry, and others where precise mixing, rotation, or material processing is required. These machines offer high capacity, accuracy, and safety within automated production lines. High Capacity Adjustability Automatic Loading and Unloading Systems Temperature and Humidity Control Drive System Materials and Construction Safety Systems Integration with Automated Systems Adaptability and Flexibility Energy Efficiency Kdsdpfxszbk R Ie Ab Hjr

Condition: used, Year of construction: 2006, functionality: fully functional, machine/vehicle number: M0616326, We are selling an extraction system including many associated ducts. The extraction unit is in good condition and has only seen limited use. Manufactured by Coral SPA, Italy, model PRN630, equipped with a powerful 37 kW motor. Suction duct diameter 600 mm: - 1970 mm, eight pieces - 1520 mm, one piece - 980 mm, two pieces - 500 mm, three pieces - 90° elbow, two pieces - 45° elbow, two pieces With branches: - 140 mm diameter, 500 mm length, one piece - 220 mm diameter, 500 mm length, one piece - 260 mm diameter, 500 mm length, two pieces Reducer from 600 mm to 450 mm, one piece Suction duct diameter 450 mm: - 1970 mm, three pieces - 990 mm, two pieces - 500 mm, one piece - 90° elbow, two pieces Suction duct diameter 350 mm: Kdsdpeyx Dhcefx Ab Hjr - 1979 mm, three pieces - 1500 mm, one piece Distributor, 500 mm x 250 mm, one piece - 500 mm length, 125 mm diameter, one piece 45° elbow, four pieces Reducer from 450 mm to 350 mm, one piece The extraction system can be inspected by appointment. Pickup or shipment by truck available.

Condition: good (used), Year of construction: 2005, Console table with vacuum suction plate New control system installed in 2022 (price: €9,000) Control program: Xilog Plus X-axis between stops: 2500 mm Y-axis with milling: 1240 mm Kdedpfszhgz Isx Ab Her Y-axis with drilling: 1080 mm Z-axis: 200 mm (max. workpiece height: 100 mm) Main spindle HSK 63 with 6.5 kW, up to 24,000 rpm 4 tool changers at the front 4 tool changers at the rear Drilling unit External dimensions: 5.8 x 2.8 m

Condition: used, functionality: fully functional, Year of construction: 2008, machine/vehicle number: 3171, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, Equipment: CE marking, cooling unit, documentation/manual, emergency stop, safety light barrier, Bylaser 4400. CO2 laser. Sheet metal thickness: steel, 20 mm. The sheet metal laser is being sold due to the purchase of a new laser. Very few operating hours (see photo). Includes cooling unit. Complete documentation is available. Regular maintenance performed. Dust extraction system, manufacturer Donaldson DFPRE4L-R, can be purchased separately (see separate listing). Without vacuum suction unit. Kodpfx Abozvncie Hodr Can be inspected while powered on until September 14, 2026. No dismantling included. Dismantling must be organized independently. Dismantling must be completed between September 15 and 17, 2026.

Condition: used, Year of construction: 2022, Duplo booklet maker System 5000 offer consists of: - 3x collators DSC-10/60i - bookletmaker DBM-500 - trimmer DKTS-200 Duplo System 5000 booklet maker 3xDSC-10/60i: collator - number of bins: 30 - paper size: width: min. 120mm, max. 350mm length: min. 148mm, max. 500mm - paper weight: 0-300g/sqm - loading volume: 60mm - feeding system: belt suction feed system - conveyance system: roller belt conveyance system - power supply: 120 to 240 V 50/60 Hz - power consumption: 9.5A (120 V 60 Hz), 4.5A(220-240V, 50Hz) DBM-500: stitcher folder Kdedpfx Abjy Uifrs Hsr - paper size: min. 120x170mm; max. 350x500mm - process speed: >5000 pcs/h, A5 >4600 pcs/h, A4 >4000 pcs/h, A3 - No. of stitches 0 to 2 - stitch thickness within 5mm - wire diameter #25 to #27 - folding capacity: below 25 sheets - dimensions: 2,230 (W) x 865 (D) x 1300 (H) - ratings: 120 to 240 V 50/60Hz 6.5-3.8A - weight: 412kg We can also organize the following for you: packaging, loading, transport ( by ship or plane) including customs

Condition: new, Year of construction: 2026, CORMAK OS3500 is a mobile welding fume extractor designed for effective removal of welding fumes and exhaust gases directly at the source. The unit combines high suction power with a large airflow rate, while the sound-insulated fan chamber ensures quiet, smooth operation. Additional advantages include an integrated pneumatic filter cleaning system, airflow regulation at the suction inlet, and a robust, industrial-grade construction. Automatic Filter Cleaning – Consistent Performance Kdedpfeygt Utjx Ab Her The CORMAK OS3500 is designed with user convenience and long-term performance stability in mind. For this reason, it is equipped with an automatic pneumatic filter cleaning system. In practice, this means that accumulated contaminants are regularly knocked off the filter without the need for frequent manual intervention. The result is twofold: first, the extractor maintains a constant level of efficiency; second, service downtime and operating costs are reduced. In a production environment, this is crucial—any unplanned interruption or loss of suction affects workflow and the quality of working conditions at the workstation. Adjustable Suction Power Tailored to the Task Another key advantage is airflow regulation at the suction inlet. This solution allows the extraction force to be adjusted to actual working needs: different for short spot welds, different for long continuous welding, and different again for grinding operations. Regulation at the inlet enables quick, operator-friendly adjustment without time-consuming configuration changes. This makes it easier to maintain a balance between effective extraction and operator comfort (for example, when working with smaller parts where excessive suction could hinder handling). Robust Construction and Mobility The OS3500 is designed for everyday use, which is why great emphasis has been placed on build quality. Its solid construction performs reliably in workshop and industrial environments—where equipment is frequently moved, operates for many hours a day, and must withstand intensive use. Its mobility allows the extractor to be used at multiple workstations without investing in a permanent installation throughout the entire hall. This is a practical solution for both companies with several workstations and those that frequently change layouts or carry out varied jobs. Wide Range of Applications In practice, the OS3500 is suitable wherever air contaminants are generated: welding (MIG/MAG, TIG), metalworking, grinding, and other processes producing dust and fumes. Its purpose is to improve working conditions by reducing pollutants in the operator’s breathing zone. This solution positively impacts employee health, work comfort, and the perception of the facility as a modern and safe workplace. Technical Specifications Model Airflow (m³/h) Pressure (Pa) Filter Efficiency (%) Power (kW) Voltage (V) Weight (kg) OS2400 2400 2000 99.9 2.2 400 80 OS3500 3500 2000 99.9 3.0 400 122 *The power cable and plug are not included due to varying connection infrastructures and customer requirements.

Condition: new, Year of construction: 2026, CORMAK OS-4000S Welding Fume Extractor The CORMAK OS-4000S is an industrial welding fume extractor designed for effective removal of welding fumes, dust, and fine contaminants generated during welding and related operations. The OS4000S features a new, lower-profile housing. The unit operates locally at the workstation, capturing contaminants before they spread throughout the workshop or production hall. This significantly improves working comfort, visibility in the welding area, and helps maintain workplace health and safety standards. Specifications Parameter Value Model OS4000S Power Supply 400 V Power 4.0 kW Airflow Capacity 3000–4000 m³/h Operating Pressure 3050–2600 Pa Filtration Efficiency 99.00% Number of Filter Cartridges 4 pcs Filter Specification Ø325 × 600 mm Filter Material Polyester Filter Cleaning Method Pneumatic, pulse cleaning Dust Container Capacity 50 l Noise Level ≤ 78 dB(A) Ksdpfx Abjy Sgc Ao Hodr Dimensions 900 × 900 × 1950 mm Why Choose the OS-4000S? High extraction performance – effective suction of fumes and dust near the welding arc. Large-surface cartridge filtration system – highly efficient separation of fine particles. Automatic pneumatic filter cleaning – stable operation with fewer maintenance interruptions. Dust collection container – fast and convenient emptying without mess. Easy operation – user-friendly controls and quick access to consumable components. Effective Filtration and Consistent Suction Power The OS-4000S uses a multi-stage filtration system based on cartridge filters. This allows the unit to efficiently capture fine dust and welding fume particles. Additionally, the pneumatic pulse cleaning system shakes dust off the filter surfaces, which: maintains constant suction efficiency, extends filter service life, reduces performance loss during intensive operation. Comfort and Safety at the Workstation Extracting contaminants directly at the source provides immediate benefits: less smoke in the operator’s working zone, improved weld visibility and more stable working conditions, cleaner workshop environment and reduced dust accumulation on machines and installations. Applications The CORMAK OS-4000S is suitable for: MIG/MAG, TIG, and MMA welding, metalworking and maintenance operations in production facilities, grinding and deburring near the workstation, light cutting and processing operations that generate dust and fumes.

Condition: used, axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 10/2007, total length: 13,670 mm, total width: 2,550 mm, suspension: air, tire size: 385/65, tire condition: 30 %, wheelbase: 9,000 mm, color: other, Year of construction: 2007, Equipment: ABS, = Additional options and accessories = - Air Suspension - BPW Axles - Drum brakes = More information = Axle configuration Tyre size: 385/65 Make axles: BPW Brakes: drum brakes Suspension: air suspension Rear axle 1: Lift axle; Max. axle load: 9000 kg; Tyre profile: 30% Kdjdpfx Abozvdrte Her Rear axle 2: Max. axle load: 9000 kg Rear axle 3: Max. axle load: 9000 kg Weights Empty weight: 7.920 kg Carrying capacity: 34.080 kg GVW: 42.000 kg Identification Registration number: OK-21-BL

Condition: used, Year of construction: 2023, Used system Year of manufacture: 2023 Condition: As new, only a few operating hours Equipment and technical data: Stationary clean-air filter system ECO JET DUO 6 XL ZRS for extracting wood dust and chips Fans: 2 × 7.5 kWAir volume: 10,000 m³/hNegative pressure: 2,700 Pa (total) / 2,200 Pa (static)80 filters à 2.50 m, BIA Category M, electrically conductive, incl. support cagesFilter area: 77.6 m²Filter surface loading: 129 m³/(m² × h)Filter cleaning: AL-KO OPTI-JET®Pressure relief area: 0.84 m² (bursting discs)Base frame with discharge hopper and rotary valve; dry discharge with C-coupling ECO JET DUO 6 ZWR XL, 1,100 mm intermediate section for increasing unit height with 2 suction openings Base frame with discharge hopper and ZRS 960/1 FG rotary valve for chip disposal via on-site transport fan into an existing silo or similar; DN 200 transport pipe, approx. 1,260 mm, connection on site ZRS 960/1 FG Rotary valve: ATEX Directive 94/9/EC; CE 0588 Ex II 1D/- (indoor/outdoor); EX D; FSA 11 ATEX 1614XMotor: 0.18 kW / 0.78 A, 3 Ph / 400 V / 50 HzProtection class: IP 54 / B3; Insulation class FSpeed: 41 rpm; Capacity: 15,744 l/h*; 7 cellsInlet/outlet: 960 × 250 / 960 × 208 mmDimensions: 1,100 × 605 × 330 mm; Temperature range: up to 50 °C Further equipment: 400 mm suction connection with non-return flap in rectangular ductECO JET backflow flap 910 × 346 × 500 mm AL-KO Control System ACS II: Touchscreen display, ST 1200 controller, Sitop Power power supply, 24 V control voltage and integrated frequency inverter for cascade control of 2 fans up to 37 kW Plain-text fault display with common fault lamp; manual discharge start via display button; manual cleaning start via push button; cleaning via differential pressure; post-cleaning; external start via potential-free contact; operating hours counter; maintenance interval display; control cabinet lighting and ventilation; monitoring of fire damper, residual dust sensor, level sensor and max. filter pressure 10 individually controlled solenoid valves Kdjdpfx Abezlbqro Hjr 4-group slide control for up to 8 machines: control via potential-free contact (PFK) or induction coil; 24 V DC motorised or electro-pneumatic slide gates; max. 4 panels per conveying line Power section ZRS up to 0.18 kW; time settings adjustable via touchscreen Bursting disc sensor and evaluation unit; pressure transmitter for inverter; pressure switches; warning beacon; 2 × PTC monitoring; rotary valve speed monitoring Exhaust/return air changeover 24 V DC for summer/winter operation Filter monitor/residual dust monitoring with evaluation unit according to DIN EN 12779 and H3: if 0.3 mg/m³ is exceeded, a self-latching alarm is triggered and the recirculation air damper automatically switches to exhaust air 10-way terminal box 24 V/230 V, fully wired for filter cleaning, incl. approx. 6 m cable Pipe system incl. bends, branches, reducers, PU hoses, machine connections, small parts and EP slide gates for extraction of 11 woodworking machines + 1 HRS according to specification Return air according to TRGS 553 with changeover damper and fire damper Galvanised base frame for container loading Paddle switch 24 V–230 V with socket for level indication in the discharge hopper Dimensions: 2,092 × 2,000 × 5,292 mm Inspection possible in assembled condition in 06667 Weißenfels. Price incl. dismantling. Availability: Short notice Location: ...

Condition: used, Year of construction: 2014, functionality: fully functional, power: 7.5 kW (10.20 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, volume flow: 6,000 m³/h, overall weight: 900 kg, inlet: 300 mm, negative pressure: 2,900 Pa, rotational speed (max.): 3,000 rpm, We offer our Höcker Polytechnik Vacumobil JT300-L – Industrial Dust Extraction Unit The Höcker Polytechnik Vacumobil JT300-L is a high-performance mobile industrial dust extraction system, designed for continuous operation in demanding woodworking and production environments. Kdjdpfxeygw Rxs Ab Hor Equipped with automatic jet-cleaning (compressed air filter cleaning), this unit ensures consistent suction performance without downtime, making it ideal for workshops running multiple machines simultaneously. Key Specifications: Motor power: 7.5 kW Airflow capacity: 6,000 m³/h Working airflow: 5,100 m³/h Negative pressure: 3,100 Pa Filter surface area: 28 m² Extraction inlet: 300 mm Collection capacity: large multi-bin system 500 liters Main Advantages: Continuous operation thanks to automatic jet-cleaning system High extraction capacity – suitable for multiple machines (CNC, edge banders, planers, etc.) Industrial-grade safety features, including backflow protection and integrated fire safety options Energy-efficient motor technology (IE3 / optional IE5) Robust and reliable German engineering Applications - perfect for: Woodworking workshops CNC machining centers Furniture production Medium to large industrial operations The JT300-L offers nearly double the capacity of smaller models (e.g. JT200), making it the ideal solution for businesses looking to scale up production while maintaining a clean and safe working environment. We also sell our smaller Höcker Polytechnik Vacumobil JT200-L on Machineseeker. If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: used, Year of construction: 2018, functionality: fully functional, type of input current: three-phase, overall weight: 95 kg, input voltage: 400 V, volume flow: 1,100 m³/h, pressing: 2,250 Pa, power: 1.1 kW (1.50 HP), input frequency: 50 Hz, Equipment: type plate available, KEMPER ProfiMaster IFA welding fume extraction system – year of manufacture 2018 – 400 V Manufacturer: KEMPER Model: ProfiMaster IFA Year of manufacture: 02/2018 Serial number: 180200349 For sale is a used, fully functional KEMPER ProfiMaster IFA welding fume extraction system. This unit is ideally suited for extracting welding fumes and grinding dust directly at the source and is designed for professional use in workshops and metalworking facilities. The system is in good condition. The filter was replaced on October 6, 2025, so the unit is immediately ready for use. Technical data: Airflow rate: 1,100 m³/h Power connection: 400 V / 50 Hz Kdjdszg T A Aopfx Ab Her Motor power: 1.1 kW Rated current: 2.3 A Max. negative pressure: 2,250 Pa Protection class: IP42 Control: 24 V Weight: 95 kg Continuous operation: 100% duty cycle IFA-approved design Equipment: 3m arm length Mobile design Filter monitoring Easy filter replacement via maintenance flap Robust industrial design Ideal for welding workstations Condition: Used Technically flawless Filter replaced on October 6, 2025 Safety inspection according to inspection label valid until 2026 All information without guarantee.

Condition: good (used), Dust extraction blower, extraction, extraction system, dust extraction device, cyclone separator, cyclone, separator, dust separator, centrifugal separator, welding fume filter, welding fume extraction, flue gas extraction fan, filter system, cartridge dust extraction system, cartridge filter device, cartridge filter -Manufacturer: Zender, filter system cartridge filter with pneumatic filter cleaning -Inlet opening: Ø 390 mm -Outlet opening: Ø 390 mm -Note: filter unit only, without extraction fan -Quantity: 1 piece available -Price: per piece -Transport dimensions: 4000/1480/H1650 mm Kedpfx Aoy R S E Hjb Hodr -Weight: 700 kg

Condition: refurbished (used), Year of construction: 2024, functionality: fully functional, machine/vehicle number: AK2-SCBS201, input current: 230 A, For sale is a used ELS labeler/labeling station with a conveyor belt. The machine was acquired by us after we installed our own labeling system on our thermoforming packaging machine. The labeler was subsequently completely overhauled and tested for functionality. The system is mounted on a sturdy stainless steel/aluminum frame and features an integrated conveyor belt. The photos show labeling heads, roll holder, control panels, sensors, and mechanical adjustment options for adapting to different products or packaging. Data / Features: Manufacturer: ELS Type / Designation according to nameplate: AK2-SCBS201 Machine no. according to nameplate: 16615 / 2024 Labeling station with conveyor belt Kjdpfx Abjzkucfj Hsdr Height and position adjustment Stainless steel / aluminum construction Control panels on the labeling head Sensors included Completely overhauled Function tested Condition: used, ready for operation The machine is suitable for use in packaging lines, e.g., for labeling packaged products, trays, boxes, or similar items. Before use, the system should be adjusted to the specific product and adapted to the corresponding label format. Note: Technical data such as label width, label length, belt width, connection values, and exact dimensions can be requested separately if needed or checked on-site. Inspection and testing possible by appointment. Errors and prior sale excepted.

Condition: new, Year of construction: 2026, CORMAK OS2400 is a mobile welding fume extractor designed for effective removal of welding fumes and exhaust gases directly at the source. The unit combines strong suction power with a high airflow rate, while the sound-insulated fan chamber ensures quiet and smooth operation. Additional advantages include an integrated pneumatic filter cleaning system, airflow regulation at the suction inlet, and a robust, industrial-grade design. Automatic Filter Cleaning – Consistent Performance The CORMAK OS2400 is also designed with ease of operation and long-term performance stability in mind. For this reason, it is equipped with an automatic pneumatic filter cleaning system. In practice, this means the filter is regularly “pulsed” to remove accumulated contaminants without the need for frequent manual intervention. The effect is twofold: first, the extractor maintains a constant level of efficiency; second, service downtime and operating costs are reduced. In a production environment, this is critical, as any unplanned downtime or loss of suction affects workflow and the quality of working conditions at the workstation. Adjustable Suction Power Tailored to the Task Another key advantage is airflow regulation at the suction inlet. This solution allows the extraction power to be adjusted to actual working requirements: different for short spot welds, different for long continuous welding, and different again for grinding operations. Regulation at the inlet enables quick, operator-focused adjustment without time-consuming configuration changes. This makes it easier to maintain a balance between effective extraction and operator comfort (for example, when working with smaller parts where excessive suction could hinder handling). Solid Construction and Mobility The OS2400 is designed for everyday use, which is why great emphasis has been placed on high build quality. Its solid construction performs reliably in workshop and industrial environments—where equipment is frequently relocated, operates for many hours a day, and must withstand intensive use. Its mobility makes it easy to use the extractor at multiple workstations without investing in a permanent installation throughout the entire facility. This is a practical solution for both companies with several workstations and those that frequently change layouts or carry out varied projects. Kjdpfx Asyguclsb Hjdr Wide Range of Applications In practice, the OS2400 is suitable wherever air contaminants are generated: welding (MIG/MAG, TIG), metalworking, grinding, and other processes that produce dust and fumes. Its purpose is to improve working conditions by reducing pollutants in the operator’s breathing zone. This solution contributes to employee health, work comfort, and the perception of the workplace as modern and safe. Technical Specifications Model Airflow (m³/h) Pressure (Pa) Filter Efficiency (%) Power (kW) Voltage (V) Weight (kg) OS2400 2400 2000 99.9 2.2 400 80 OS3500 3500 2000 99.9 3.0 400 122 *The power cable and plug are not included due to varying connection infrastructures and customer requirements.

Condition: used, Year of construction: 2014, functionality: fully functional, power: 4 kW (5.44 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, volume flow: 3,400 m³/h, noise level: 71 dB, overall weight: 425 kg, extraction connection diameter: 200 mm, nominal flow rate: 3,400 m³/h, negative pressure: 2,900 Pa, rotational speed (max.): 3,000 rpm, We offer this used Höcker Polytechnik VACUMOBIL 200 mobile exhaust system, year of construction 2014. Manufacturer: Höcker Polytechnik Model: VACUMOBIL JT200-L JT = jet cleaning (compressed air filter cleaning) The JT version is an upgraded version of the VT (vibration cleaning) version. The JT200-L is ideal for continuous use (CNC, planing line, nesting) Better continuous operation Less maintenance during intensive use Type of input current: three-phase Negative pressure: 2.900 Pa Volume flow: 3.400 m³/h Overall weight: 425 kg Input voltage: 400 V Suction socket: 200 mm Power: 4 kW Rotational speed (max.): 3,000 rpm Input frequency: 50 Hz We also sell our JT300-L model on Machineseeker. Ksdeygw Iqepfx Ab Hjdr If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, A robot-assisted CLOOS welding system is offered. 1) CLOOS robotic welding system, wire feed speed: 30m/min, steel wire spool weight: 15kg, aluminum wire spool weight: 4kg, welding power source dimensions X/Y/Z: 1245mm/470mm/930mm, welding power source weight: approx. 190kg, wire feeder dimensions: 680mm/410mm/235mm, wire feeder weight: approx. 24kg. 2) CLOOS ROMAT 310 welding robot, payload: approx. 10kg, max. reach: approx. 1540mm, max. workpiece weight: approx. 3500kg, control system: CLOOS ROTROL II-D. 3) CLOOS WPV-DP-10000 N workpiece positioner, quantity: 2. 4) CLOOS GLC 503 Quinto welding power sources, quantity: 2. 5) CLOOS main electrical cabinet. 6) Welding fume extraction system. Including safety fence and peripheral equipment. Inspection possible by prior arrangement. Kdjdpfxezli Acs Ab Hsr

Condition: excellent (used), Year of construction: 1998, functionality: fully functional, type of input current: three-phase, volume flow: 9,900 m³/h, power: 11 kW (14.96 HP), Füchtenkötter dust extraction system for sale. Kdedpfx Abezn Uk De Hor Comes with various accessories, including piping and automatic control for self-cleaning. The system has 2 suction inlets and one outlet for the filtered air. I acquired 2 systems from an insolvency auction. One system will be used for my own purposes. The other system is for sale. The condition of the systems is excellent. Dimensions: approximately 4 x 2.5 x 3 m.

Condition: like new (used), Staff Ice System BTX150 Ice Cube Machine / Ice Maker 150 kg/24h Year 2022 Technical Specifications Gelato BTX150 A Staff Ice System ice machine for the production and storage of ice cream. Designed for manufacturing and storing ice cream. Automatic extraction. Stirrer with durable polyethylene blades. The double lid allows ingredients to be added during the process. Vertical tank for complete control of the production process. 50 customizable operating programs. Technical features: Maximum ice cream production per cycle: 2 liters. Ice cream production: 15 l/h. Dimensions: 43.5 x 59.2 x 59.5 cm. Kdjdpfx Ajyzc Rueb Hsr

Condition: new, Year of construction: 2025, functionality: fully functional, overall weight: 14 kg, total width: 245 mm, total length: 420 mm, total height: 450 mm, input voltage: 230 V, noise level: 59 dB, warranty duration: 12 months, volume flow: 420 m³/h, Equipment: chassis, type plate available, Fume extraction with remote control and suction hose Air inlet interface ρm flange Max. Power 300W Kdjdpfxoxt Dq Re Ab Hjr Air velocity 24/ms Filtration efficiency 0.3 µm / 99.97%. Noise 59ᐸdb Length of suction hose 1.5M System shear flow approx. 420m³/h Dimensions L420 x B245 x H450 Weight 14.0kg Application: This product is suitable for places dealing with air pollution such as smoke, peculiar odors, dust, toxic and harmful gases generated during soldering process, laser marking and engraving, printing, etc. - Extraction unit for use in the workplace - Separately replaceable fine dust pre-filter M5 - Large HEPA H 13 filter surface with 2.4m² for optimum particle filtration and long filter service life - Activated carbon for effective gas cleaning - Portable extraction unit, for flexible placement directly under or next to the workplace - Easy filter change - Variable power control through percentage speed settings in 10 steps - Health protection through electronic filter monitoring and filter alarm - Long service life thanks to high-quality EC blower - Quick, easy and stable installation thanks to Easy-Click system

Condition: used, Year of construction: 2008, functionality: fully functional, total height: 2,100 mm, total length: 1,800 mm, total width: 1,000 mm, type of input current: three-phase, overall weight: 255 kg, table load: 200 kg, input voltage: 400 V, A down-draft table combines a workbench with an exhaust/filtration system. Fumes and dust are extracted through the tabletop and rear panel and filtered by filters mounted in the table structure. The table can be placed anywhere, at any welding or grinding station. A three-stage spark separator enhances safety and meets the most stringent international guidelines for fumes and dust. DraftMax Advance features a manually operated filter cleaning mechanism activated by a button. In addition, the DraftMax Ultra model can be equipped with an automatic start/stop device, which provides even easier operation. This is an ideal table for very intensive welding or grinding applications. Work surface dimensions: 1366 mm x 750 mm Kodjzukv Nopfx Ab Hsdr Weight: 255 kg Noise level: 67 dB (version with silencer and HEPA filter) Supply voltage: 400 V/3~/50 Hz Motor power: 2.2 kW Capacity: 2500 m³/h Filtration area: 2 x 26 m² Filtration efficiency: >99.9% (filter class: M) HEPA filter (required for stainless steel welding) Noise silencer Stock number: 1151

Year of construction: 2023, operating hours: 100 h, condition: good (used), functionality: fully functional, Water treatment system for compounding and extrusion plants For sale is a complete industrial water treatment system for supplying a compounding or extrusion plant with softened and fully demineralized process water. The system consists of pre-filtration, a dual softening unit, a reverse osmosis unit, a 3,000-liter permeate tank, and a frequency-controlled dual booster pump unit. The system is particularly suitable for closed-loop cooling water circuits and for applications where a consistently high water quality and a reliable supply to the production plant are required. System configuration Pre-filtration and protection Backwash filter for mechanical impurities Flow rate: 7.5 m³/h at a pressure drop of 0.5 bar Automatic, time-controlled backwash System separator with a KVS value of 12 m³/h Connection size: R 1" Pressure regulator with a DIN flow rate of 5.3 m³/h Safety module Connection block with integrated bypass and sampling valve Flexible pressure hoses, length 1,000 mm, Rp 1", up to 10 bar Dual softening unit Dual softening unit for continuous operation Nominal flow rate: 2.9 m³/h Capacity: 200 m³ × °dH each Resin disinfection system Salt deficiency switch with potential-free alarm or low-level signal Sampling group with pressure gauge and sampling valve Hardness control unit for wall mounting Installation fitting for 1" pipe Due to the dual design, one softening column can be regenerated while the second column continues to supply softened water. Reverse osmosis unit Reverse osmosis unit with vertically arranged high-performance modules, permeate recirculation, and automatic concentrate flushing. Technical data: Permeate flow rate at 15 °C: approx. 450 l/h Recovery rate: approx. 75 % Salt rejection rate: approx. 98.5 % Required inlet pressure: 2–6 bar Feed water connection: DN 25 Permeate connection: DN 20 Concentrate connection: DN 15 Supply voltage: 3 × 400 V / 50 Hz Dimensions: approx. 1,800 × 610 × 810 mm (H × W × D) Permeate tank Black PE storage tank Capacity: 3,000 liters With level control and various connections Dimensions: approx. 1,750 × 995 × 2,450 mm (H × W × D) Dual booster pump unit Pre-assembled and electrically wired booster pump unit on a stainless steel frame, ready for connection. Equipped with two pumps and integrated frequency converters for constant and demand-based pressure supply. Technical data: Nominal flow rate per pump: 2.0 m³/h Nominal head: 43.6 m Flow rate with one pump: approx. 0.6–3.0 m³/h Flow rate with two pumps: approx. 1.2–6.0 m³/h Delivery pressure at maximum flow rate: approx. 2.5 bar Zero flow head: approx. 6.7 bar Factory-set constant pressure: 4.0 bar Pre-pressure of the diaphragm expansion tank: 3.5 bar Measuring range of the pressure sensors: 0–10 bar Diaphragm expansion tank: 8 liters Permissible water temperature: 1–30 °C Kdjdpfszt Sb Dsx Ab Hjr Permissible ambient temperature: 1–40 °C Suction connection: DN 65 / PN 10, loose flange Pressure connection: 50-mm socket Supply voltage: 3 × 380–500 V Motor power: 2 × 1.1 kW Nominal current per pump: 2.2–1.9 A Dimensions: approx. 950 × 700 × 858 mm Dry weight: approx. 55 kg Technical specifications based on available documentation. Subject to prior sale and errors. An inspection of the system is possible by prior arrangement.

Condition: like new (used), functionality: fully functional, Year of construction: 2023, operating hours: 2,500 h, control type: CNC control, controller manufacturer: Beckhoff, laser type: fiber laser, laser source model: MaxPhotonix, laser hours: 1,700 h, laser power: 12,000 W, sheet thickness (max.): 40 mm, table length: 3,000 mm, table width: 1,500 mm, working length: 3,000 mm, working width: 1,500 mm, feed rate X-axis: 100 m/min, feed rate Y-axis: 100 m/min, positioning accuracy: 0.05 mm, repeat accuracy: 0.03 mm, workpiece weight (max.): 1,500 kg, input voltage: 400 V, type of cooling: water, overall weight: 10,000 kg, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, safety light barrier, Fiber laser for sale: Machine: Songu Mach 3015 Year 2023 - Put into operation 2024 Power: 12kW MaxPhotonix laser source Size: 3x1.5m Working area Kdjdpfoyk Uuiox Ab Hjr Working Hours: Total run time - 105days (2520h), Total NC run time 73days (1752h) Operating system: Beckhoff PLC operated from Windows 10 CAM system: Lantek CAM, postprocessor for the machine. Easy to use and conventient. Gas system: Hoerbiger with 3 gas inlets (O2, N2 and compressed air 16BAR/Or anything else) Fully enclosed and with CE marking Safety systems: Opening the door stops the machine and changing table light barriers stop the table changing process (does not stop the machine while working) Table changer: Hydraulic table changer with two pallets. Pallets in the machine remain in the same height, tables are chain driven. Hydraulic liftin capacity 1410kg Alpha direct drive servo drivers for axises with Alpha reducer gears. Laser head: Precitec ProCutter2.0 - spares and consumables available in EU Automatic lubrication of axises and guideways Fume extractor: Donaldson - has big panel filters with automatic cleaning function. Starts when machine starts cutting. Laser frame has sectioned fume extraction system - flaps open up where the laser head is moving. Positioning speed: 100m/min, acceleration 2.4g Accuracy: Positioning +-0,05, Repositioning +-0,03 Weight: Main frame ~8800kg, loading table ~2500kg Camera inside the working area Side access from two doors, front access Elecrical cabinet mounted to the machine Cuts materials like: Mild steel, stainless, aluminium, copper, brass. Example, 20mm mild steel - cutting speed 4m/min (O2), 3mm cutting speed 28m/min (N2) High pressure air compressor: 16Bar compressor for Air cutting, cheaper function for cutting mild steel Uses NC code for cutting, part size is determined from NC and cutter compensation parameter that can be changed from the machine Machine cutting parameters - Fly cut, film burn, small contour, etc. One single parameter consists of 9 different adjustable parameters. Option for nozzle cleaning while cutting and programmable nanojoints (extra small breakaway point for part removal) Automatic focus control Automatic sheet location measuring system Part Stop, Contour Stop, Crash sensor, Low pressure sensors, etc MDI mode for simple sheet trimming funcion Machine bed protected from heat Waste trolleys under the main cutting area and loading table Graphical visualisation on cutting plan Alarm log files Under power, can be tested Location: Tallinn Estonia

Condition: used, functionality: fully functional, For sale is a salt bath black oxide system, including a crane and fume extraction system, as well as various accessories. The black oxide system was built in-house and approved, but does not have a CE marking. Tank dimensions: Length: 990mm, Width: 490mm, Height: 680mm Consisting of 6 tanks Overall dimensions: Length: 4.70m, Width: 1.40m, Height: 0.95m Crane and fume extraction system included in the price + 6 additional heating elements Kjdpfjzkf E Rsx Ab Hsdr Disassembly and collection by the buyer! Inspection possible at any time by appointment.