Used Gas Compression for sale (7,439)

Condition: excellent (used), Gas Cylinder Dryer / Infrared Heating Unit for Gas Bottles (Nitrogen, CO2 etc.) For sale is a professional gas cylinder drying unit with infrared heating, e.g. for nitrogen or other industrial gas cylinders. The system consists of a large insulated stainless‑steel drying cabinet with infrared heaters, a separate control cabinet and a loading ramp. Features / Equipment: Drying system for several gas cylinders at the same time (industrial design) Infrared heating with OSRAM THERATHERM 250 W emitters Insulated stainless‑steel housing with reflective inner lining Solid base frame with transport frame / rollers Separate electrical control cabinet including: Temperature controller Ammeters for heating circuits Hour counters (heating rods / lamps) Drying phase counter Push buttons incl.: bottle drying ON/OFF, Start/Stop, heating phase ON, vacuum/underpressure, valves, emptying, reset Main switch Hnedpfsy Nkqxsx Akrou Upper pipe manifold with several gas / vacuum connections and valves Aluminium loading ramp for moving cylinders into the unit The unit was used in an industrial environment. If you are interested or need more details, please send me a message.

Condition: refurbished (used), Year of construction: 2019, functionality: fully functional, number of cylinders: 12, MTU E3042D3, 12V400GS engine Deeply refurbished, repainted. New cylinder sleeves, new pistons, new oil pump etc. Hnodsywg Ipjpfx Akrsu Missing only oil pan.

Condition: excellent (used), radial fan, dust extraction blower, fan, extraction, dust blower, blower, exhaust fan -Exhaust exhaust fan: heat-resistant -Dust extraction fan: radial fan -Engine: 90 kW 1480 rpm -Connection: Inlet Ø 390 mm -Connection: Output Ø 390 mm -Fan wheel: Ø 1220 mm (drawing in the pictures) Hjdpfxoypu Uye Akronu -Volume flow rate: m³/h -Dimensions: 2610/2030/H2080 mm -Weight: 1950 kg

Condition: used, Year of construction: 2012, temperature max. 1350 ° internal length of the oven 2800 mm internal width of the oven 2800 mm Hnjdpfx Aeytx Rmekrju internal height of the oven 1200 mm Loading 20000 kg dimensions 3,3x3,3x2 m Annealing furnace with extraction system Make: Helmut Peiler 2 pieces available

Condition: excellent (used), Year of construction: 2014, PROD. PARKER HIROSS TYPE ATT260 S/N 398616590001 YEAR 2014 POWER (kW) 13.5 CAPACITY (m3/min) 26 PRESSURE (bar) 16 HOURS (RUNNING/TOTAL) INVERTER BUILT-IN DRYER Hnodpfxjy Twaho Akrju EXCHANGER COOLED (AIR/WATER) ON TANK DOCUMENTS YES CONNECTION NEW/USED USED

Condition: excellent (used), Year of construction: 2007, For sale are functional and very well-maintained gas burners from the Weishaupt G50 series – 5400 kW, including MULTIFLAM gas valve, manufactured in 200/. G50/1-B MULTIFLAM Output: 450 - 3500 kW Design: 3LN Hsdpjzabnnefx Akrsnu Year of manufacture: 2007

Condition: used, Year of construction: 2011, operating hours: 21,266 h, load capacity: 1,600 kg, lifting height: 3,215 mm, fuel type: gas, gearing type: automatic, Equipment: cabin, * Yale GLP16VX * Max. lifting capacity: 1600 kg * Max. lift height: 3215 mm Hsdpjy Ucqzofx Akronu * Fully functional

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, input voltage: 380 V, type of input current: three-phase, input current: 16 A, input frequency: 50 Hz, heating capacity: 87.92 kW (119.54 HP), Drying Tunnel M&R Sprint 2000 (Gas) – 152 cm Belt Width! We offer for sale an industrial screen printing drying tunnel by M&R, model Sprint 2000, type SD2K6012010808, manufactured in 2004, in very good condition. The machine is in continuous operation, fully functional, and ready to work in a professional print shop. Key specifications: - Manufacturer: M&R Printing Equipment (USA) – a global leader in screen printing equipment. - Power supply: Gas (Natural Gas / LP Propane) – an economical solution that significantly reduces production costs compared to electric dryers. - Belt width: 152 cm (60 inches) – ideal for handling two automatic presses simultaneously or large formats (bedding, towels, tablecloths, large prints). - Total length: approx. 850 cm. - Heating chamber length: approx. 366 cm. - Belt condition: Teflon belt in very good condition (refurbished, without damage, runs perfectly). - Electrical supply: 380V / 3-phase. Why choose this machine? This unit is a true workhorse. M&R construction ensures precise temperature control and even drying, which is crucial when working with challenging inks (plastisol, water-based). The device is CE certified. Technical condition: Hedpfx Akoy Evirjrenu The tunnel is well-maintained, and the heating system works properly. No additional investment required – the belt is in working condition, and the gas burners operate flawlessly. Additional information: Due to the size, collection in person is required. The machine is available for viewing and testing in operation by prior appointment. This is an excellent opportunity for a print shop looking to increase its capacity while maintaining low operating costs. Voltage: 380 V Current: 16 A Frequency: 50 Hz Number of phases: 3 Motor Full Load Amps (FLA): A Wiring Diagram No.: S63VCS1 Serial No.: 100457715S Machine No.: 1073 Natural gas operating pressure: 5 inches water column LPG/propane operating pressure: 5 inches water column Natural gas manifold pressure: 3.2 inches water column LPG/propane manifold pressure: 1.3 inches water column Maximum heat input: 300,000 Btu/hr Minimum heat input: 40,000 Btu/hr

Condition: used, Shielding Gas Welding Machine MIG-O-MAT Type U 405 Serial No. Year of manufacture 1991 Output 400 amps = 60% duty cycle 280 amps = 100% duty cycle Adjustment range 18 steps Torch hose length 5 meters Power supply 380 V, 50 Hz, 32 amp plug Hodoyy Dfqepfx Akrsnu - Spot and interval welding function - 2-stroke and 4-stroke welding functions - Wire feed with 2-roller drive - Water-cooled - Shielding gas pressure regulator - Supplied with 1.2 mm welding wire Dimensions L x W x H: 1300 x 500 x 900 mm Weight approx. 200 kg In good condition

Year of construction: 2025, condition: new, functionality: fully functional, Unused, brand new CHP unit with a TOYOTA 4Y engine, all-in-one design, employing a “plug and play” concept for easier and cost-effective installation, a user-friendly interface, a safety module for enhanced hardware protection, and a single-bearing generator to minimize potential engine damage. Hnedpfx Aszl H Atokrou This 20 kWe CHP unit is ideally suited for locations with a continuous demand for both electricity and heat. The key to CHP’s economic viability lies in utilizing the heat generated in conjunction with electricity production. Product location: Indop, d.o.o., Primorska 6a, 3325 Šoštanj, Slovenia.

Condition: used, machine/vehicle number: 26602, Year of construction: 2014, operating hours: 1,493 h, load capacity: 5,000 kg, lifting height: 3,000 mm, fuel type: gas, mast type: simplex, construction height: 2,235 mm, Equipment: sideshift, .: 26602 Device details: Year of manufacture: 2014 Load capacity: 5000 kg Lifting height: 3000 mm Recorded operating hours: 1493 h Mast type: Standard Mast height: 2235 mm Length/Width/Height: 3200 / 1460 / 2235 mm Operating weight: 6850 kg ---- Equipment: * Overhead guard * 3rd valve * Work light (front) ----- Attachments: * Side shifter * Load backrest ---- Additional device information: Flashing beacon Single-pedal operation The operating hours are generally the recorded hours. We would be happy to offer you suitable transport. We have another 250 - 300 forklifts, attachments, and sweepers immediately available for you. Of course, we also offer rental options! We would also be happy to buy your OLD one. Do you have any questions? Hjdpfxszhwics Akrjnu You can reach us during our business hours from 7:30 a.m. to 4:00 p.m. We look forward to hearing from you! We speak English. Intermediate sale and errors for this offer are expressly reserved. In the dealership, the device is sold in its current condition, without any refurbishment. All information is provided without guarantee; errors and changes are subject to change.

Condition: new, Year of construction: 2026, The CORMAK 150-litre pressure vessel with a working pressure of 11 bar is a reliable solution designed for storing compressed air in industrial plants, workshops, and pneumatic systems. Its robust steel construction, compliance with European Union directives, and UDT certification make this tank an essential component of any compressed air system. Thanks to its optimized design and high pressure resistance, the tank can serve both as a storage buffer and as an element for stabilizing compressor operating parameters. Hedpfx Ajzwlm Uskronu Key Advantages of the 150 L Pressure Vessel Professional pressure-rated construction – made of high-quality 4 mm thick steel, resistant to pressure and corrosion. UDT certification and CE marking – compliance with European safety and quality standards. 11 bar working pressure – suitable for most pneumatic systems, including those with higher operating requirements. High capacity – 200 litres – provides stable pneumatic system supply and reduces the frequency of compressor start-up cycles. Multiple connection ports – as many as 5 connection ports with diameters of 1", 2", and 1/2" allow flexible connection to various installations. High-quality workmanship – durable external paint coating. Space-saving vertical design – allows for efficient use of available space in the workplace. Construction and Technology – Robust Design for Demanding Applications This compressed air tank has been designed for intensive use in industrial environments. The body is made of structural steel with a 4 mm wall thickness, ensuring resistance to pressures of up to 11 bar and providing long-term durability. All welds undergo rigorous quality control, while the tank surface is protected with a coating resistant to chemical and atmospheric factors. The tank is equipped with a nameplate bearing the CE symbol and the UDT notified body number, confirming its approval for use on the Polish and European markets. The set includes complete technical documentation, a pressure vessel passport, and material certificates. Precision and Operating Efficiency – Stable Pressure and Optimized Compressor Performance With a large 150-litre capacity, the tank acts as an air buffer, stabilizing pressure throughout the pneumatic system. This enables the smooth operation of compressed-air-powered equipment and significantly extends compressor service life by reducing the number of start/stop cycles. The vertical design allows for compact installation, which is particularly important in facilities with limited space. A properly selected compressor tank minimizes pressure drops and prevents pneumatic system overload, resulting in greater efficiency and safety throughout the installation. Standard Equipment Connection ports: 5 pcs. – diameters 1", 2", and 1/2" Nameplate with CE marking UDT notified body number Complete technical documentation and pressure vessel passport External anti-corrosion coating

Condition: good (used), Year of construction: 2011, Refrigerant dryer Hodpfx Akozvqwcjrsnu Manufacturer: Atlas Copco Type: FD150 Year of manufacture: 2011 Power: 1 kW Volumetric flow rate: 9 m³/min

Condition: good (used), Year of construction: 1980, Compressed air tank, pressure vessel, pressure tank, compressed air reservoir, pressure vessel, compressor tank, air receiver for oil-air separation system, condensate separator, oil and water separation apparatus, oil separator, oil/water separator, air compressor oil-water separator, air receiver Hodpozt I I Tjfx Akrenu -Manufacturer: Atlas Copco, Air tank standing from compressor type GA 408 Pack -Type: 19650295-49 -Contents: 46 l -Operating pressure: 11 bar -Accessories: incl. attachments, see photos -Dimensions: 520/300/H1010 mm -Weight: 62 kg

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: FN524545, Year of construction: 2016, operating hours: 9,317 h, load capacity: 2,500 kg, lifting height: 4,700 mm, fuel type: gas, mast type: simplex, construction height: 3,071 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity: 2,500 kg Lifting height: 4,700 mm Load center distance: 500 mm ISO class: 2 MACHINE DETAILS Mast type: Simplex Drive type: Internal combustion engine Rated power: 38.0 kW Overall height: 3,071 mm Own weight: 4,100 kg EQUIPMENT Side shifter Fork positioner Hodpfjzu Nhqsx Akrsnu 3rd valve 4th valve Heater Full cab

Condition: used, machine/vehicle number: 26732, Year of construction: 2019, operating hours: 3,515 h, load capacity: 3,000 kg, lifting height: 4,800 mm, free lift: 1,450 mm, fuel type: gas, mast type: triplex, construction height: 2,240 mm, Equipment: cabin, sideshift, .: 26732 Device details: Year of manufacture: 2019 Load capacity: 3000 kg Lifting height: 4800 mm Recorded operating hours: 3515 h Free lift: 1450 mm Mast type: Triplex Mast height: 2240 mm Length/Width/Height: 2730 / 1270 / 2220 mm Operating weight: 4785 kg ---- Equipment: * Overhead guard * 3rd valve * Full cabin * Full free lift * Heater * Work lights (front) * Work lights (rear) ----- Attachments: * Side shifter ---- Additional device information: Bluespot Seat heating---- The operating hours are generally recorded hours. We would be happy to offer you suitable transport. We have a further 250 - 300 forklifts, attachments, and sweepers immediately available for you. Hedpfx Aksz Atf Asrsnu Of course, also for rent! We would also be happy to buy your OLD one. Do you have any questions? You can reach us during our business hours from 7:30 a.m. to 4:00 p.m. We look forward to hearing from you! We speak English Subject to prior sale and errors for this offer. In dealership sales, the device is sold in its AS-IS condition, without refurbishment. All information is subject to change without notice; errors and omissions excepted.

Condition: used, Plasma impulse gas metal arc welding machine, pulse machine EWM Type Tetrix 400 Plasma / Tetrix 400 DC-P Robot Plasma welding and soldering machine Art. No.: Serial No.: Year of manufacture 2003 Output: 400 amps = 40% duty cycle 360 amps = 60% duty cycle 300 amps = 100% duty cycle Setting range: stepless Open-circuit voltage: approx. 26 volts Hjdpfx Akjzwb R Nsronu Mains connection: 400 volts, 50 Hz, 32 amps plug - Digital display for current - Digital display for voltage, job, and program - Various welding programs can be selected - Pulse mode - Separate 4-roller wire feeder EWM, Type DV cold wire hand with connecting hose package approx. 5 meters - Approx. 4 meter hose package - External EWM water cooling, Type Cool 71 U41 DKF - External high-voltage unit - Welding machine equipped with 1 mm welding wire Space required L x W x H: 1300 x 640 x 1830 mm Weight: 245 kg Very good condition

Condition: used, MIG MAG welding machine, gas-shielded welding system, MESSER LINCOLN, type MagStar 18 Serial No. 4210048, Year of manufacture approx. 1995 Output: 180 amps = 60% duty cycle 140 amps = 100% duty cycle Setting range: 8 power levels Mains connection: 400 volts, 50 Hz, 16 amp plug Hnjdpfezugn Ijx Akrju - Spot welding attachment - 2-roller wire feeder - 3 meter hose assembly with central connection - Welding gas pressure regulator Space required L x W x H: 1150 x 460 x 650 mm Weight: 100 kg In good condition

Condition: used, Year of construction: 2012, functionality: fully functional, type of input current: three-phase, input voltage: 400 V, input frequency: 50 Hz, Equipment: type plate available, KAESER TE 91 Refrigerant Dryer – Compressed Air Refrigerant Dryer – R134a – 16 bar Manufacturer: KAESER KOMPRESSOREN Type: TE 91 Year of manufacture: 2012 Serial number: 3160 Hodpfxjz Eqdre Akronu Article number: 1.8008.50010 Capacity: 9100 l/min Refrigerant: R134a Refrigerant charge: 1.950 kg Max. operating pressure of air system: 16 bar Supply voltage: 400 V / 3 phases / 50 Hz Rated current: 3.5 A Permissible ambient temperature: +3 °C to +43 °C

Condition: used, machine/vehicle number: 26737, Year of construction: 2010, operating hours: 8,321 h, load capacity: 3,000 kg, lifting height: 3,200 mm, free lift: 1,420 mm, fuel type: gas, mast type: duplex, construction height: 2,220 mm, Equipment: sideshift, .: 26737 Device details: Year of manufacture: 2010 Load capacity: 3000 kg Lifting height: 3200 mm Recorded operating hours: 8321 h Free lift: 1420 mm Mast type: Duplex Mast height: 2220 mm Length/Width/Height: 2700 / 1250 / 2180 mm Operating weight: 4480 kg ---- Equipment: * Overhead guard * 3rd valve * Half cabin * Full free lift * Heater * Front work light * Rear work light * Right-hand door ----- Attachments: * Side shifter ---- Additional device information: Flashing beacon ---- The operating hours are generally the recorded hours. We would be happy to offer you suitable transport. We have another 250 - 300 forklifts, attachments, and sweepers immediately available for you. Of course, we also offer rental options! We would be happy to buy your OLD one. Do you have any questions? Hnedpfx Aksz Hadwjrou You can reach us during our business hours from 7:30 a.m. to 4:00 p.m. We look forward to hearing from you! We speak English. Subject to prior sale and errors in this offer. In the dealer business, the device is sold in its current condition, without refurbishment. All information without guarantee, errors and changes excepted.

Condition: used, Manufacturer: STT Type: Dryer 1500 Factory/Manufacturer number: 930671 Device type: Refrigerant dryer / Compressed air dryer Supply voltage: 400 V Phases / Frequency: 3-phase / 50 Hz Control voltage: 230 V Power consumption: 5,505 W Current consumption: 10 A Refrigerant: R134a Refrigerant charge: 830 g Hjdpfjzx Tiyjx Akronu Design: Stand-alone unit

Condition: used, Bongard MG Range Gas or oil-fired, depending on configuration Heating power: 110 kW Hnjdpfx Akezyafdjreu Gas connection: 3/4" galvanized pipe Trolley: 800 × 1000 mm Trolley: 780 × 980 mm Maximum load: 200 kg 180 to 216 baguettes (250 g each) 18 levels for baguettes 108 to 135 loaves (400 g each) 15 levels for loaves Stainless steel baking chamber Rotating tray Pulsed steam injection Maximum temperature: 280 °C Power supply: 3N~400 V Electrical protection: 16 A Water pressure: 2.5 to 4 bar Water connection: 3/8" or 12/14 mm pipe Oil connection: 10/12 mm copper pipe Smoke exhaust: Ø 200 mm Dimensions: 2251 × 2062 × 2492 mm Depth with door open: 2774 mm Minimum door opening: 1020 mm Net weight: 1830 kg Key advantages Capacity of 180 to 216 baguettes (250 g each) Production of 108 to 135 loaves (400 g each) Rotating trolley loaded up to 200 kg Baking chamber entirely made of stainless steel Adjustable blowing vents Two valves for programmable steam evacuation Retractable and removable ramp for loading Front access to the burner and technical components Reinforced door with double-glazed, ventilated glass, removable

Condition: excellent (used), Year of construction: 2013, PROD. KAESER TYPE TH371 S/N 1002 YEAR 2013 Hodpjzu Rvcsfx Akrsnu POWER (kW) 4.3 CAPACITY (m3/min) 32 PRESSURE (bar) 16 HOURS (RUNNING/TOTAL) FREQUENCY CONVERTER BUILT-IN DRYER R404a 14kg HEAT EXCHANGER COOLED (AIR/WATER) ON TANK DOCUMENTS CONNECTION NEW/USED USED

Condition: used, machine/vehicle number: 26718, Year of construction: 2021, operating hours: 6,455 h, load capacity: 2,500 kg, lifting height: 4,760 mm, free lift: 1,450 mm, fuel type: gas, mast type: triplex, construction height: 2,280 mm, Equipment: cabin, .: 26718 Device details: Year of manufacture: 2021 Load capacity: 2500 kg Lifting height: 4760 mm Operating hours (metered): 6455 h Free lift: 1450 mm Mast type: Triplex Mast height: 2280 mm Length/Width/Height: 2698 / 1200 / 2180 mm Operating weight: 4102 kg Hjdpozvfkkofx Akrenu ---- Equipment: * Overhead guard * 3rd valve * 4th valve * Full cabin * Full free lift * Work lights (front) * Work lights (rear) ---- Additional device information: Bluespot Seat heating Single-pedal operation ---- The operating hours are generally metered hours. We would be happy to offer you the appropriate transport. We have another 250 - 300 forklifts, attachments, and sweepers immediately available for you. Of course, also for rent! We would also be happy to buy your OLD one. Do you have any questions? You can reach us during our business hours from 7:30 a.m. to 4:00 p.m. We look forward to hearing from you! We speak English. Subject to prior sale and errors in this offer. In dealership sales, the device is sold in its current condition, without refurbishment. All information without guarantee, errors and changes excepted.

Condition: good (used), Gas cylinder trolley, gas cylinder cart, steel cylinder cart, cylinder trolley, cylinder cart Hnodpfxezul Its Akrou -Gas cylinder transport trolley: Cylinder trolley, cylinder cart with pneumatic tires -External dimensions: 1020/730/H1220mm -Weight: 34 kg