Used Gate for sale (527)

Condition: excellent (used), The machine is ready for operation. Gate size: 110 cm height and 97 cm width. Dcedpfxoycx Hme Afpjc

Condition: new, maximum load weight: 30,015 kg, overall weight: 36,000 kg, axle configuration: 3 axles, loading space volume: 30 m³, total width: 2,550 mm, total height: 3,960 mm, Year of construction: 2026, Equipment: ABS, Kässbohrer K.STN L 30 stainless steel tank trailer 30m³ for liquid manure TECHNICAL INFORMATION: External length 9,180 mm * Height (empty vehicle) 3,960 mm * Axle distance 5,000 mm * Rear overhang 3,050 mm * Fifth wheel height 1,320 mm * Tank diameter 2,200 mm TECHNICAL DIMENSIONS: Volume 30.0 m3 * Empty weight 6,045 kg * Axle capacity is 27,000 kg * Kingpin capacity of the fifth wheel load is 12,000 kg * The operating temperature is 80°C * Test pressure (+H bar) 0.5 bar * Total weight 39,000 kg TANK: Cylindrical tank container, with a slope to prevent residual quantities in the tank, made of AISI 304 (DIN 1.4301) stainless steel * Number of manholes 1pc. * Manholes size DN450, 4 x nut tightening with hinged dome cover * Aluminium walkway * Access ladder on the left side of the tank * 1 x 5 M hose holder, large aluminium box open at the top * Straight flange as preparation for cleaning pipe * 1 x 8" pipe with flange at the top of the rear of the tank, for discharge by suction * 1 x 8" pipe with square flange at the front right of the tank, as preparation for a filling indicator * 6" preparation for a ventilation line * Preparation for pressure valve * Preparation for vacuum valve and vacuum DISCONNECTION SYSTEM: A transparent pipe made of hard plastic with a diameter of 4" is included at the rear in order to be able to read the level of the transported goods in the tank from the outside * 1 x 8" plastic filling funnel in front of the suction line at the top of the rear of the tank * Börger FL1036 hydraulically driven pump with carbon steel housing * When discharging with the pump, a 6" Perrot coupling with hook closure, which is used on slurry vehicles, is attached to the outlet line. * The outlet of the outlet line is equipped with 1 manually controlled 6" brass slide valve * At the inlet of the mixing line in the tank there is 1 x 4" pneumatically controlled gate valve. 1 x pneumatically controlled 8" slide valve made of brass at the inlet of the tank suction line * 1 x 6" pneumatic vent valve with brass slide * When unloading with a pump, there is a 6" swivel joint to be able to run the discharge line outlet at the rear of the vehicle from left-right-middle * 2x6" pneumatic slide valve DRIVE: Chassis is made of a special aluminum alloy that offers high quality and high strength * BPW axles 3x9 tons with air suspension and disc brakes * 1st axle can be lifted * Aluminum supports * Tires 385/65 R 22.5" * Aluminum rims * KNORR-ILVL electronic air suspension ECAS OTHER: 1 x bracket suitable for connecting a pump, welded to the frame underrun protection mat in accordance with the regulations COLORS: Color of the chassis MB 7350 Nova gray (glossy) * Color The container RAL 9005 black Djdpfxjun Em Ne Afpjcc Painting of the tank in BLACK The photos may show different equipment. The text of the construction description is binding!!!

Condition: used, Year of construction: 2012, functionality: fully functional, The plant comprises the following components:  Platform with a vibrated base for the bin support; this platform is protected by perimeter railings and is accessed via a ship-type ladder;  Empty bag magazine; the supply of empty bags is performed manually by the operator. The exact position of the bags is secured by adjustable side guides; a sensor located under the stack of bags signals when the pile is depleted;  On the structure of the empty bag magazine, pneumatic cylinders are installed for gripping the bag, opening its mouth, and inserting it onto the product dosing spout. The bags are handled by a series of suction cups. The pneumatic control panel QP1 is also mounted on the supporting structure of the magazine;  The dosing spout is supported by 3 load cells; at the outlet, a bucket-type gate valve driven by two pneumatic cylinders is installed. Next to it, two additional cylinders with hooks at the ends are used for tensioning the bag mouth.  The bag is clamped along its longer side by two jaws that hold it after filling and guide it to the sewing machine. Movement is achieved by geared motor units and wheels sliding on chrome-plated rods. At this stage, the bag rests on a motorized conveyor belt for transfer; this belt is also raised via a pneumatic cylinder so that the bag rests gently upon filling completion; the height of this belt can be adjusted manually using a handwheel acting on four jacks, to adapt the belt height to the bag type.  Once inserted into the sewing machine, the bag is stitched and the thread cut; still resting on the conveyor, the bag reaches the overturning station—there, it is held by two jaws, rotated 90°, and finally released so as to be parallel to the conveyor.  The next belt features, in its initial part, a series of square rollers for bag straightening, followed by a conveyor belt for forward movement;  Lastly, there is the roller conveyor where the bag is picked up by the robot; this conveyor is stopped by a photocell when the bag reaches the end of the roller line;  The robot gripper is of the comb type and is equipped with a translation cylinder to discharge the bag and two cylinders operating a plate to lock the bag during handling prior to discharge.  Two boxes containing the solenoid valves and vacuum units are installed on the plant;  An electrical control panel manages the entire plant; the operator panel and weighing module are installed on it; Dedpfx Afsxrcc Ajpscc  The robot is managed by its own control panel with a dedicated operator interface;

Condition: excellent (used), functionality: fully functional, Electric motor 90 KW - 1480 rpm Dcodoucwu Tspfx Afpsc 380 Volt. Gated motor.

Condition: excellent (used), Year of construction: 2008, ARBURG A 520 A 1500-400 ALLDRIVE (36.061 h) incl. KUKA Robot (S&P 3788) Manufacture year: 2008 Operating hours: 36,061 Stunden Screw: 40 HVF mm Injection pressure: 2000 bar Stroke volume: 201 cm³ Dodpfsyg Ivrsx Afpscc Clamping Force: 150 t Tie bar distance: 520 x 520 mm Mould installation height min.: 250 mm Plate distance max.: 1000 mm Dimensions: 5100 x 1600 x 2700 mm Eeight: 7250 kg Connected load: 60 kW Accumulator, 4 x Corepuller, Robot Interface EM67, Airvalve, incl. KUKA Robot System KR 5 arc, Convejorbelt, Safety Gate etc... Price: on request contact: Mr. Ralf Schulz

Condition: used, Year of construction: 2019, functionality: fully functional, System consisting of: 1 Qirox QRC 350-E welding robot including QC2 adv. control unit, 1 Qirox QRC 410-E welding robot including QC2 adv. control unit, handheld programming unit with 25 m cable, 24 V buffering, 2 GB flash drive Software expansion for each robot: Gas nozzle sensor, arc seam detection, multi-layer technology, point editor, transformation, 15" TFT with touchscreen on the cabinet, master-slave for robots 1 and 2, RSM software for remote maintenance 2 ICSE LD offline lasers Robot 1 single-wire tandem welding equipment with automatic torch change system: 2 Qineo Puls 600 (600A) with master control module, 3 wire feeders, 3 torch hose packages, single MRW 510 evo welding torch, Duo drive CDD 2, single torch test gauge, and CDD, single-wire mechanical cleaning with external cleaning, pressure booster, 1 tandem burner ZMW 850 evo, Duo drive tandem CDD-T, burner test gauge single and with CDD, tandem mechanical cleaning with external cleaning Ground track 50 kN, travel distance 26 m, 1 C stand with height slide, travel distance 1.5 m for robot 1, 1 fixed C stand for robot 2 2 WPST-30 kN rotating devices, electric. Shaft, synchronous drive, designed as a gyro wheel for the support of hall beams (min. size 70x180 and max. 400x900 mm, support weight 4000 kg, on a motorized sliding track, max. clamping length approx. 19 m, Dodpjwgd Hzjfx Afpecc 1 L-shaped manipulator WPS-TS 20 kN, turning radius 2750 mm Connection control, 2 light barriers for floor track protection, 2 start pre-selectors, partition walls and sliding gates including limit switch protection, 2 bumpers for floor track protection of both carriages, signal light for system status. Both robots can weld on the hall beams, and robot 2 can also weld on the L-shaped manipulator. 1 Tecau filter unit with 6000 m³ extraction capacity, 2 mobile extraction hoods with curtains, extraction slotted duct Delivery date: available immediately. Appointments by arrangement. Inspections under power are possible.

Condition: used, Horizon GFB-56 Gate Fold Buckle The Horizon GFB-56 Gate Fold Buckle is a premium solution for precise gate folding, known for its easy installation and high compatibility with various Horizon folding machines. Key Features - Easy Installation: The GFB-56 can be set up quickly without requiring specialized knowledge - Precise Folding: Ensures exact gate folds - Compatibility: Compatible with the following Horizon folding machines: AFC-566F | AFC-566A | AFC-564A Specifications - Maximum Sheet Size: 540 x 360 mm - Minimum Sheet Size: 160 x 100 mm - Inlet Height: 570 - 970 mm - Performance: Up to 20,000 cycles per hour, 230 m/min - Power Supply: 230V / 50Hz, 0.7 kW - Dimensions: 1,060 x 750 x 1,300 mm - Weight: 14 kg All-Inclusive Service Package Dcjdpfxoxwl D Ho Afpoc We take care of everything: from secure packaging and transportation to customs clearance. Upon request, we can also provide a customized leasing offer. Sustainable and Economical Choose a used machine and benefit twice: Save the environment and your budget. Despite possible signs of use, you receive a quality product at an attractive price.

Year of construction: 2014, condition: used, Multiweigh 10 heads Multihead weigher. Stunning multihead weighers from Multiweigh. They are in a very good condition ready for production. - Large stainless steel buckets Dcodpfx Ajubf A Nofpsc - Ridigized - 10 heads with in-feed ring - Collection gate

Condition: good (used), Year of construction: 2012, Exposé for Hall Rental Production and assembly hall ready for occupancy Fully equipped - 850 m² - Compressor system available - 40.0 t overhead crane (2 x 20 t rotating cranes) - 10.0 t overhead crane - 5.0 t gantry crane - 20.0 t overhead crane - 12.5 t overhead crane - Millutensil MIL303 spotting press - Crane hook height: 7 m - Truck entrance gate height: 4.5 x 5 meters - Workshop trolley with tools and lifting gear available - Foreman’s office and meeting room with air conditioning - Ladies and gents restroom - Lathe and grinding machine available - Fiber optic connection available (contract with Telekom possible) Dcsdpjygkinsfx Afpoc Available for immediate rent Location: 35232 Dautphetal, Industriestr. 9 Viewings by appointment possible

Condition: used, Year of construction: 2026, color: grey-black, empty load weight: 6 kg, first registration: 01/2026, fuel type: gasoline, gearing type: mechanical, TITLE: USED SINGLE-COMPARTMENT STEEL DEMOUNTABLE TANK WITH 3 DISCHARGE OPENINGS: 1 SMALL IN THE FRONT SECTION, 1 MEDIUM ON THE FRONT SIDE, AND 1 REAR GATE VALVE WITH GUILLOTINE, SIDE TUBE (DRIVER’S SIDE), AND TWO TOP FILLING HATCHES. REF: 25-U-155 TYPE: Stainless steel tank DIMENSIONS TOTAL EXTERNAL LENGTH: 6.25 m TOTAL EXTERNAL WIDTH: 2.30 m TOTAL TANK LENGTH: 6.00 m TOTAL TANK WIDTH: 2.00 m TANK HEIGHT INCLUDING DEMOUNTABLE FRAME: 2.20 m TOTAL TANK CAPACITY: 18,500 L WEIGHT: 3,370 kg COLOUR: White Errors and/or omissions excepted. Displayed prices do not include VAT. Please contact our sales team for up-to-date pricing and conditions. For further information: Dedpfx Ajyfxyfjfpecc Loris: 3484773001 URL: #theskipspecialists SCARRABILI AURORA Operates in the purchase and sale of industrial and commercial vehicles, specializing mainly in the waste management sector. Specialized in trucks, trailers, and demountable equipment. Over 50 trucks and more than 150 ready-to-deliver skip bodies and containers, with and without cranes, available from stock. E.&O.E. Given the number of listings and details posted, Aurora recommends confirming the accuracy of the information provided with our sales staff.

Condition: new, Year of construction: 2026, functionality: fully functional, spindle speed (min.): 12,000 rpm, spindle speed (max.): 36,000 rpm, High part output | 3D CNC milling for small workpieces up to 1000 x 800 x 400 mm. > Efficient milling spindle, short throughput times and high part output: Due to the highly efficient milling spindle, the 5-axis CNC machine creates a high part output. The CNC milling machine stands for absolutely fast production processes and short throughput times. In addition, the rotary table of the CNC milling machine performs the C-axis movement, making milling even more effective. > Little space required, fast commissioning: The RT-F 1400 CNC milling machine requires little space and can be commissioned within two days. Set-up times are minimal. The CNC machine can be easily moved to another location using a forklift. > First-class contour accuracy for 3D machining with fixtures: All components, such as milling tool, spindle and the machine are matched to each other and to the desired component. A fixture from HG GRIMME SysTech can additionally influence the milling quality. Existing fixtures can be reused at any time. > Use in industry and small businesses: The CNC rotary table milling machine RT-F 1400 is particularly suitable for 3D machining of smaller components (800x1000x400mm). The CNC milling machine is used just as successfully by large industrial companies, such as the automotive industry, as it is in small businesses. > Basic version of the CNC machining center - Protective cabin with automatic gate unit, pneumatic - Swiveling, integrated control panel - High-performance CNC control NUM Flexium+ with nPad and 19'' monitor - Tool changing system with 12 places, dust-tight - Tool measurement Renishaw-TS 27 R - chip tray, vacuum pump Dcodpfx Aex S Etmsfpoc > 365 further equipment options - example CFK package The machine can be equipped with many further options. One example is the upgrade of the machine equipment for CFRP machining. The CFRP package takes into account many safety aspects that are necessary for the processing of composite material. We offer around 365 additional options across our entire product range and can further equip the basic machine offered at any time. > Suitable materials for the 5-axis CNC rotary table milling machine 1400: plastics, composites such as CFRP, model making materials, aluminum. Further technical data Cube dimensions component - 1000 x 800 x 400 mm (+162 mm substructure) Travels X/Y and Z - X/Y and Z: 1,040 x 1,400 mm x 725 mm Travels of rotary axes A and C - Rotary axis C (table) ± 1,080°. - Swivel axis A, standard tool spindle with tool changing system ± 110°. Speeds - Rapid traverse linear axes X/Y/Z 40/40/30 m/min - Rapid traverse rotary axes A/C 14,000°/18,000° m/min Accuracies - Positioning accuracy ± 0.040 mm - Repeat accuracy ± 0.035 mm Machine rotary table - ø 800 mm Table load - approx. 200 kg Milling spindle - High-frequency milling spindle 9 kW (S6) - High frequency milling spindle 8 kW (S1) - speed 36.000 rpm - Tool holder HSK 40 E Machine weight - approx. 3000 kg Already included special equipment - Head suction for floating dust and chips - Interior with perforated footboards - interior lighting - Ethernet and remote maintenance - 3D spline - Connection T-Box (nPad) (subject to change without notice)

Condition: used, Year of construction: 2025, color: grey, empty load weight: 1 kg, fuel type: gasoline, gearing type: mechanical, TITLE: NEW OPEN SKIP CONTAINER FOR INERT MATERIALS WITH REAR GATE, SINGLE LEAF, TILT-AND-SWING DOOR, DOUBLE-ACTION. Container with a rounded rock bin design, suitable for loading excavators as well. 50 mm hook and 160 mm beams with side brackets, floor resting on the beams with supporting side brackets and flush-to-floor beams. Ref.: 22-N-112 TYPE: Inert materials NEW: Yes LID: No OPENING: Rear door, single leaf tilt door DIMENSIONS TOTAL EXTERNAL LENGTH: 4.20 m (including beams) EXTERNAL WIDTH: 2.30 m FRONT SIDE PANEL INTERNAL/EXTERNAL: 1.50 m / 1.66 m REAR SIDE PANEL INTERNAL/EXTERNAL: 0.95 m / 1.11 m LATERAL SIDE PANEL INTERNAL/EXTERNAL: 0.75 m / 0.92 m VOLUME: 6 m³ WEIGHT: 1,040 kg Dcjdpfx Afjvimk Aepsc FLOOR: 4 mm WALL: 3 mm COLOUR: grey RAL 7000 Subject to errors and/or omissions. Displayed prices do not include VAT. Please contact the sales department for up-to-date prices and terms. For more information: Loris: 3484773001 URL: #glispecialistidelloscarrabile SCARRABILI AURORA operates in the buying and selling of industrial and commercial vehicles, mainly specializing in the waste sector. Specialized in trucks, trailers, and roll-off equipment. With a ready-to-deliver fleet of more than 50 trucks and over 150 containers, including roll-off bins with and without cranes. E.&O.E. Due to the number of listings and details provided, Aurora invites you to verify the accuracy of the information with the sales staff.

Condition: good (used), mileage: 1,75,735 km, power: 120 kW (163.15 HP), first registration: 04/2020, fuel type: diesel, axle configuration: 4x2, wheelbase: 4,330 mm, fuel: diesel, fuel tank capacity: 100 l, color: white, driver cabin: day cab, gearing type: mechanical, number of gears: 6, emission class: euro6, total width: 2,220 mm, loading space length: 43,000 mm, loading space width: 21,400 mm, loading space height: 23,500 mm, Year of construction: 2020, Equipment: ABS, Bluetooth, air conditioning, central locking, cruise control, electric window regulation, power assisted steering, power mirror, spoiler, tail-lift, = Further Options and Equipment = - Automatic dipped headlights - Passenger bench seat - Bluetooth hands-free kit - Roof spoiler - Third brake light - Euro 6 - Driver airbag - Cruise control - Wooden loading floor - Wooden slat lining - Height-adjustable driver’s seat - Front center armrest - Radio/CD player - Rain sensor - Side door - Immobilizer - Partition wall with window = Further Information = General Information Cab: single Registration number: VFT-80-P Technical Information Number of cylinders: 4 Engine displacement: 2,299 cc Front axle: Max. axle load: 1,850 kg; Steered Rear axle: Twin tires; Max. axle load: 2,800 kg Weights Unladen weight: 3,065 kg Payload: 435 kg Gross vehicle weight: 3,500 kg Dcodpfoygh Hdsx Afpjc Functional Tail lift: D'HOLLANDIA DHLM.10, rear gate, 750 kg Maintenance, History and Condition APK (Roadworthiness test): Valid until 12/2026 Technical condition: good Optical condition: good

Condition: excellent (used), Year of construction: 2010, total height: 3,060 mm, total length: 2,635 mm, total width: 2,250 mm, feed length X-axis: 1,100 mm, feed length Y-axis: 610 mm, feed length Z-axis: 635 mm, workpiece weight (max.): 1,000 kg, feed rate X-axis: 20 m/min, feed rate Y-axis: 20 m/min, feed rate Z-axis: 18 m/min, table length: 1,250 mm, table load: 1,000 kg, table width: 650 mm, spindle speed (max.): 10,000 rpm, overall weight: 7,500 kg, distance stand to spindle center: 685 mm, grinding spindle motor power: 11,250 W, rapid traverse X-axis: 20 m/min, rapid traverse Y-axis: 20 m/min, rapid traverse Z-axis: 18 m/min, travel distance X-axis: 1,100 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 635 mm, rotational speed (max.): 10,000 rpm, grinding spindle speed: 10,000 rpm, space requirement height: 3,060 mm, space requirement length: 2,635 mm, space requirement width: 2,250 mm, We are offering this very well-maintained Chevalier 2443VMC surface grinding machine, year of manufacture 2010. Travel distances X, Y, Z: 1100×610×635 mm Distance spindle head to table: 125–760 mm Distance spindle center to column: 685 mm Table dimensions: 1250×650 mm T-slots: 5×18×100 mm Maximum table load: 1000 kg Maximum main motor power: 11.25 (30 min) α8/8000; 15 (30 min) kW Spindle speed: #40: 10,000, 12,000; #50: 8,000 rpm Spindle taper: #40; #50 Maximum feed rate X/Y/Z: #40: 20/20/18; #50: 20/20/15 m/min Machining speed: 1–7,600 mm/min Positioning accuracy: 0.004 mm Repeatability: 0.003 mm Tool magazine capacity: 20 (carousel); 24 (optional) pcs. Maximum tool diameter: #40: 20 (carousel); 24 (opt.); #50: 24 (carousel) mm Maximum tool weight: #40: 7; #50: 15 kg Tool holder: #40: BT40 or CT40; #50: BT50 or CT50 Pull stud: P40T-1; P50T-1 Compressed air requirement: 5 kg/cm² Coolant pump power: #40: 2.1; #50 X/Y: 2.1; Z: 3.0 kW Power requirement: #40: 15; #50: 20 kVA Installation dimensions (H×W×D): 3060×2250×2635 mm Machine weight: #40: 7500; #50: 7900 kg Recent fixes: - The water separator tank of the central air distribution cracked and a small amount of air leaked. It has been replaced. - Replacement of plastic slides on bed way covers. Dsdjyazfaopfx Afpjcc - Controlsystem Kft.: 30th geometric inspection and adjustment of the C-axis bearing wedge as well as realignment according to the machine feet. The new geometric data speaks for itself. The wear on the tool changer arm documented here is the responsibility of the new owner, and the price reflects this reduced value. Photos of the current wear condition are included among the images. Up to this point, the machine still changes tools perfectly and quickly with the lever “aged, worn – replacement suggested.” In June 2020, the limit switch cables for the X- and Y-axis in the cable carrier from control cabinet to switch were replaced in full, without splicing. Loading of the equipment onto a truck at our location's gate can take place at the buyer's responsibility. Delivery from its current location is the seller's responsibility and obligation. I am happy to provide dispatch contacts for assistance. No exchange of machines, equipment, trade-in, etc. is possible due to space constraints at our facility.

Condition: good (used), functionality: fully functional, Year of construction: 2000, load capacity: 1,500 kg, platform length: 3,300 mm, platform width: 1,450 mm, Well-maintained GEDA construction hoist from first ownership: – Rack and pinion construction hoist GEDA 1500 Z/ZP – Platform type B, 3.30 x 1.45 m – 1 loading door, 1 unloading flap – Suitable for up to 7 persons and loads – Load capacity 1500 kg – Lifting speed 12/30 m/min – Base unit GEDA 1200 ZP – Cable reel with drag cable approx. 50 m – Safety catch device Dodpfjyfxdkjx Afpocc – Steel masts with rack and pinion available upon request – Mast wall brackets on request – Landing gates on request – Possible accessories, see photos 9-11 – Year of manufacture: 2000, first owner – Good condition, little used – Sale from location Karlsruhe / Southern Germany – Inspection by appointment possible

Condition: used, Format: 310 x 432mm Equipment: roller adjustment: fully automatic model: flat pile feeder with air-suction Dodjx N I Uhspfx Afpscc type of fold: single fold, parallel fold, short fold, letter fold, according fold, gate fold sheet size: max. 310x432mm; min. 125x130mm paper weight: 50-190g/sqm pile height: 50mm speed: max. 240 sheets/min. power: 230V/50Hz - 0,6kW dimensions: 1.060x553x670mm weight: 45kg

Condition: used, Year of construction: 2012, Folding machine Heidelberg-Stahlfolder TI 52/6 Dcedjx Tdgujpfx Afpjc Year: 2012 Feeder - Round pile feeder: RI 52 - Pump Buckle folding unit: 1 - First buckle folding section with 6 buckle plates - Gate fold plate - Anti noise hood(s) - Excluding delivery

Condition: as good as new (ex-display), Year of construction: 2024, operating hours: 800 h, functionality: fully functional, clamping force: 1,250 kN, ejector force: 25,000 N, All FANUC Roboshot CNC machines are FULLY ELECTRIC -warranty -only 62 hours Demo FANUC Roboshot S100iB 2024 This machine was used at trade fairs as a demo unit and is practically new. Clamping force: 125 tons Screw diameter: according to customer specifications All additional equipment is configurable based on customer needs and can be upgraded to meet specific application requirements. Additional optional equipment: -FIBER sorting flap (for separation of good and reject parts) -Hot runner controller (integrated and connected to the machine) -V-gate Dedpfeya D I Dsx Afpecc -Additional electrical sockets -Electrical quick coupling for fast mould change -Water piping system -Mouldflo system for digital monitoring of water flow, temperature, and pressure -Machine elevation by 100 mm -Hydraulic power unit for side cores (2CH / 4CH) -Robot (cartesian or 6-axis FANUC robot) -and more This machine is available for Slovenia, Croatia, Bosnia and Herzegovina, and Serbia.

Condition: new, Year of construction: 2026, laser type: fiber laser, laser power: 6,000 W, FIBER CUT laser cutting machines are a revolutionary solution in the laser cutting market. Innovative fibre laser technology allows much faster, more efficient and cheaper cutting of sheet metal parts compared to CO2 lasers. The cutters are characterised by high speeds, productivity and exceptional cutting accuracy. They provide unrivalled precision and repeatability. Our fibre lasers are primarily designed for processing materials such as: - Independent metals - Aluminium - Stainless steel - Carbon steel SOURCE POWER 6000W CONSTRUCTION The frame of our laser is designed and manufactured from scratch in our factory. The high-quality steel used for the machines is cut, then welded and precision-machined. The entire frame, gantry and gate arms have additional ribbing to achieve high rigidity and eliminate vibration and deformation. DRIVES Djdpfx Afex Tphwspscc High-resolution, high-power Schneider AC servo system motors (Y1Y2 x 2000W, x 1500w, z 400W) have been used to drive our machine tools, ensuring adequate acceleration and speed in each direction. Drive transmission is via high-performance planetary gears. The X and Y axes use the classic and proven helical slats, which ensure long life and precision. HEAD A liquid-cooled, WSX head is used for cutting sheet metal. A high-performance quartz glass lens focuses the diffused laser beam on the material to be cut, ensuring high cutting accuracy. For the process to proceed correctly, the HSU system adjusts the head height taking into account material irregularities. A safety window located between the nozzle and the lens protects the lens unit from splinters of molten metal. LASER SOURCE The laser uses a Raycus Laser light source with high electro-optical conversion efficiency, low power consumption and high beam quality. In addition, it allows faster and more efficient operation and contributes to the elimination of operator errors. In addition, the source is resistant to backscattering, i.e. the beam returning to the laser. Good power stability ensures efficient working while consuming low energy. COOLING The S&A CWFL industrial dual-temperature units are specially designed for cooling fibre lasers. They have multiple alarm functions: compressor time delay protection, compressor overcurrent protection, water flow alarm and high/low temperature alarm. INTERCHANGEABLE WORKTABLE The interchangeable work table located at the rear of the machine reduces laser downtime to a maximum. Automatic table replacement takes just 10 seconds. This gives the operator time to take the cut parts from the table and load a new sheet while the laser is working on the other table. This system ensures a very high production flow. AUTOMATIC LUBRICATION SYSTEM To keep the machine in good condition - the gears and guides need to be lubricated with oil at most every few days. An automatic system starts the lubrication every specified time and in the correct amount, and all parameters are set in the software.

Condition: new, Year of construction: 2026, laser type: fiber laser, laser power: 12,000 W, FIBER CUT laser cutting machines are a revolutionary solution in the laser cutting market. Innovative fibre laser technology allows much faster, more efficient and cheaper cutting of sheet metal parts compared to CO2 lasers. The cutters are characterised by high speeds, productivity and exceptional cutting accuracy. They provide unrivalled precision and repeatability. Our fibre lasers are primarily designed for processing materials such as: - Independent metals - Aluminium - Stainless steel - Carbon steel SOURCE POWER 12000W CONSTRUCTION The frame of our laser is designed and manufactured from scratch in our factory. The high-quality steel used for the machines is cut, then welded and precision-machined. The entire frame, gantry and gate arms have additional ribbing to achieve high rigidity and eliminate vibration and deformation. DRIVES High-resolution, high-power Schneider AC servo system motors (Y1Y2 x 2000W, x 1500w, z 400W) have been used to drive our machine tools, ensuring adequate acceleration and speed in each direction. Drive transmission is via high-performance planetary gears. The X and Y axes use the classic and proven helical slats, which ensure long life and precision. Dsdpfex Tpcbox Afpscc HEAD A liquid-cooled, WSX head is used for cutting sheet metal. A high-performance quartz glass lens focuses the diffused laser beam on the material to be cut, ensuring high cutting accuracy. For the process to proceed correctly, the HSU system adjusts the head height taking into account material irregularities. A safety window located between the nozzle and the lens protects the lens unit from splinters of molten metal. LASER SOURCE The laser uses a Raycus Laser light source with high electro-optical conversion efficiency, low power consumption and high beam quality. In addition, it allows faster and more efficient operation and contributes to the elimination of operator errors. In addition, the source is resistant to backscattering, i.e. the beam returning to the laser. Good power stability ensures efficient working while consuming low energy. COOLING The S&A CWFL industrial dual-temperature units are specially designed for cooling fibre lasers. They have multiple alarm functions: compressor time delay protection, compressor overcurrent protection, water flow alarm and high/low temperature alarm. INTERCHANGEABLE WORKTABLE The interchangeable work table located at the rear of the machine reduces laser downtime to a maximum. Automatic table replacement takes just 10 seconds. This gives the operator time to take the cut parts from the table and load a new sheet while the laser is working on the other table. This system ensures a very high production flow. AUTOMATIC LUBRICATION SYSTEM To keep the machine in good condition - the gears and guides need to be lubricated with oil at most every few days. An automatic system starts the lubrication every specified time and in the correct amount, and all parameters are set in the software.

Condition: new, Year of construction: 2026, laser type: fiber laser, laser power: 6,000 W, FIBER CUT laser cutting machines are a revolutionary solution in the laser cutting market. Innovative fibre laser technology allows much faster, more efficient and cheaper cutting of sheet metal parts compared to CO2 lasers. The cutters are characterised by high speeds, productivity and exceptional cutting accuracy. They provide unrivalled precision and repeatability. Our fibre lasers are primarily designed for processing materials such as: - Independent metals - Aluminium - Stainless steel - Carbon steel SOURCE POWER 6000W CONSTRUCTION The frame of our laser is designed and manufactured from scratch in our factory. The high-quality steel used for the machines is cut, then welded and precision-machined. The entire frame, gantry and gate arms have additional ribbing to achieve high rigidity and eliminate vibration and deformation. DRIVES High-resolution, high-power Schneider AC servo system motors (Y1Y2 x 2000W, x 1500w, z 400W) have been used to drive our machine tools, ensuring adequate acceleration and speed in each direction. Drive transmission is via high-performance planetary gears. The X and Y axes use the classic and proven helical slats, which ensure long life and precision. HEAD A liquid-cooled, WSX head is used for cutting sheet metal. A high-performance quartz glass lens focuses the diffused laser beam on the material to be cut, ensuring high cutting accuracy. For the process to proceed correctly, the HSU system adjusts the head height taking into account material irregularities. A safety window located between the nozzle and the lens protects the lens unit from splinters of molten metal. LASER SOURCE The laser uses a Raycus Laser light source with high electro-optical conversion efficiency, low power consumption and high beam quality. In addition, it allows faster and more efficient operation and contributes to the elimination of operator errors. In addition, the source is resistant to backscattering, i.e. the beam returning to the laser. Good power stability ensures efficient working while consuming low energy. COOLING The S&A CWFL industrial dual-temperature units are specially designed for cooling fibre lasers. They have multiple alarm functions: compressor time delay protection, compressor overcurrent protection, water flow alarm and high/low temperature alarm. Dcsdpfxox Tn U As Afpec INTERCHANGEABLE WORKTABLE The interchangeable work table located at the rear of the machine reduces laser downtime to a maximum. Automatic table replacement takes just 10 seconds. This gives the operator time to take the cut parts from the table and load a new sheet while the laser is working on the other table. This system ensures a very high production flow. AUTOMATIC LUBRICATION SYSTEM To keep the machine in good condition - the gears and guides need to be lubricated with oil at most every few days. An automatic system starts the lubrication every specified time and in the correct amount, and all parameters are set in the software.

Condition: new, Year of construction: 2026, laser type: fiber laser, laser power: 3,000 W, FIBER CUT laser cutting machines are a revolutionary solution in the laser cutting market. Innovative fibre laser technology allows much faster, more efficient and cheaper cutting of sheet metal parts compared to CO2 lasers. The cutters are characterised by high speeds, productivity and exceptional cutting accuracy. They provide unrivalled precision and repeatability. Our fibre lasers are primarily designed for processing materials such as: - Independent metals - Aluminium - Stainless steel - Carbon steel SOURCE POWER 3000W CONSTRUCTION The frame of our laser is designed and manufactured from scratch in our factory. The high-quality steel used for the machines is cut, then welded and precision-machined. The entire frame, gantry and gate arms have additional ribbing to achieve high rigidity and eliminate vibration and deformation. DRIVES High-resolution, high-power Schneider AC servo system motors (Y1Y2 x 2000W, x 1500w, z 400W) have been used to drive our machine tools, ensuring adequate acceleration and speed in each direction. Drive transmission is via high-performance planetary gears. The X and Y axes use the classic and proven helical slats, which ensure long life and precision. HEAD A liquid-cooled, WSX head is used for cutting sheet metal. A high-performance quartz glass lens focuses the diffused laser beam on the material to be cut, ensuring high cutting accuracy. For the process to proceed correctly, the HSU system adjusts the head height taking into account material irregularities. A safety window located between the nozzle and the lens protects the lens unit from splinters of molten metal. LASER SOURCE The laser uses a Raycus Laser light source with high electro-optical conversion efficiency, low power consumption and high beam quality. In addition, it allows faster and more efficient operation and contributes to the elimination of operator errors. In addition, the source is resistant to backscattering, i.e. the beam returning to the laser. Good power stability ensures efficient working while consuming low energy. COOLING The S&A CWFL industrial dual-temperature units are specially designed for cooling fibre lasers. They have multiple alarm functions: compressor time delay protection, compressor overcurrent protection, water flow alarm and high/low temperature alarm. INTERCHANGEABLE WORKTABLE The interchangeable work table located at the rear of the machine reduces laser downtime to a maximum. Automatic table replacement takes just 10 seconds. This gives the operator time to take the cut parts from the table and load a new sheet while the laser is working on the other table. This system ensures a very high production flow. AUTOMATIC LUBRICATION SYSTEM Dsdsx Tn S Ispfx Afpecc To keep the machine in good condition - the gears and guides need to be lubricated with oil at most every few days. An automatic system starts the lubrication every specified time and in the correct amount, and all parameters are set in the software.

Condition: used, Year of construction: 2008, functionality: fully functional, Handfeed station – 14 x feeder – book Block feeder - 12 Clamp Binding Unit - Milling & Spine Preparation Units - Hot Melt Side Glue with pre-melter – Hot Melt Spine Glue with pre-melter - Drum Cover Feeder - Nipping & Pressing Station - Exit Raceway & Laydown Delivery - Conveyor System with Reject Gate - Muller Martini Esprit Trimmer Binding thickness 2 mm - 50 mm Cover size max. 640 mm Dodpoxtau Eefx Afpjcc Cover size min. 202 mm Max. speed 900 to 4,000 cycles/hr. Max. book size 380x320 mm Min. book size 120x100 mm

Condition: used, Valves, gate-valves, butterfly-valves, ball-valves, security-valves Dcjdpfx Afjtunb Aspoc

Condition: like new (used), We are selling various plastic rollers for conveyors from stock, suitable for the offered Gates timing belts. EL 415 mm, diameter 50 mm, unit price €14.60 plus VAT; from 100 pieces onwards, €12.00 each. Stainless steel rollers and other lengths available on request. Dcodpfxoyc U Ere Afpec