Used Gauge for sale (1,900)

Condition: used, Year of construction: 2021, Overview This Robopac Helix 4 EVO pallet winder was built in 2021, with less than 500 operating hours - technically close to new. The arm carries the pre-stretch carriage around the stationary pallet, so the load itself is never turned - the configuration for unstable, fragile or heavy loads at high output (capacity below). Built as a stand-alone unit. Technical data - Manufacturer: Robopac - Model: Helix 4 EVO - Year of manufacture: 2021 - Machine type: automatic rotating-arm stretch wrapper (pallet winder) - Operating hours: less than 500 h - Capacity: 82 pallets/h (11 wraps, 1,000 mm H), 73 (15 wraps, 1,600 mm H), 64 (19 wraps, 2,000 mm H) - Wrapping cycle time: approx. 36.3 s at H 1,600 mm, 15 wraps (conveyor excluded) - Pallet sizes: 800 x 1,200 mm and 800 x 600 mm, centred on the conveyor - Load height: 1,000 - 2,000 mm incl. pallet; mechanical max. 2,550 mm incl. pallet and conveyor - Load weight: 100 - 1,200 kg - Conveyor speed: 15 m/min - Machine height: 4,721 mm; hall height from 7,000 mm - Pre-stretch: PGSA carriage, electronically adjustable 100 - 400 % - Stretch film: LDPE / LLDPE, 17 - 23 µm, roll width 500 mm, max. dia. 250 mm, core 76 mm, max. weight 16 kg - Control: Siemens SIMATIC S7-1500 PLC, TP700 7" colour touch panel - Wrapping programs: 15, expandable to 64, 12 control steps per recipe, 4 password-protected access levels - Power supply: 400 V / 50 Hz, TN-S, control voltage 24 VDC - Compressed air: 6 bar, dry and oil-free - Documentation and HMI languages: German / English / Italian Equipment - Rotating arm on a four-column steel structure, geared slewing ring with central lubrication - Patented PGSA pre-stretch carriage with load cell, film tension corrected at the corners, set from the display - Automatic film clamping, cutting and impulse-sealing unit, spring gripper with 300 mm horizontal stroke - Easy Lock tilting roller and roping device for narrowing the film web from below - Pantograph top press unit for load stabilisation during wrapping - Photocell for automatic pallet-height reading - Integrated roller conveyor, pallets loaded and unloaded by forklift - SEW IP55 geared motors for arm rotation and carriage lift, FESTO pneumatic components - Glazed enclosure with Sick M4000 light curtains, 30 mm resolution, 1,800 mm field height - Enlarged illuminated switch cabinet and a separate, independent operator panel - TPM package: centralised lubrication points, gauges with red/green rings, maintenance intervals on the display - Troubleshooting in the HMI with fault location and remedy - R-Connect remote connectivity with cloud portal for production data and teleservice - Documentation printed and on USB: manual, CE declaration, diagrams, spare parts catalogue, layout Condition Used - virtually new, dismantled and professionally packed for transport; photographs show it assembled before dismantling. Sold without warranty. Availability Fpodpszzz Rdjfx Aatol Immediately. Location: Germany. Handed over dismantled and packed (EXW).

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: 00117, type of input current: three-phase, nominal power at 50% duty cycle: 90 kVA, input voltage: 400 V, type of cooling: water, welding power (max.): 245 kVA, nominal power (apparent): 90 kVA, air pressure: 6.5 bar, input frequency: 50 Hz, Equipment: type plate available, TECNA 2117 industrial DC inverter resistance welding machine, manufactured in Italy in 2004. The machine was previously used in production for resistance welding of aluminum trays. It is offered as a complete welding system as shown in the photos, including the custom-built supporting base/workstation and the integrated water cooling/chiller system used for cooling the welding arms and electrodes. The machine is equipped with programmable electronic welding control, pneumatic electrode actuation, program selection, and water-cooled welding electrodes. Technical specifications: Manufacturer: TECNA Model / Item: 2117 Serial No.: 00117 Year of manufacture: 2004 Type: DC inverter resistance welder Supply voltage: 400 V Frequency: 50 Hz Phases: 3 Nominal power at 50% duty cycle: 90 kVA Maximum welding power: 245 kVA Secondary no-load voltage: 9.4 V Maximum welding current: 32 kA Maximum electrode force: 736 daN Water cooling requirement: 10 l/min Compressed air supply pressure: 6.5 bar TECNA machine net weight: 178 kg Equipment and features: Programmable electronic welding controller Fpsdpfszx D Tcjx Aatsl Multiple welding program selection Pneumatic welding head Copper welding electrodes Water-cooled welding arms/electrodes Custom-built supporting base/workstation Integrated water cooling/chiller system Pressure regulation and pressure gauge Emergency stop Three-phase industrial power supply The complete assembly shown in the photos is included in the sale, including the TECNA welding machine, control equipment, custom-built supporting structure, and cooling/chiller unit. Previously used in an industrial production environment for welding aluminum trays. The machine is currently installed on its supporting structure and is available for inspection in Greece. EXW Greece. Loading and transport are at the buyer's cost and responsibility.

Condition: good (used), power: 5.5 kW (7.48 HP), For sale is a robust combined jointer and thicknesser, SCM Type 2250. Fpjdpfxjzz Nt Ho Aatsl The machine impresses with its heavy-duty, solid construction, a planing width of 500 mm, and long jointer tables. The fold-up jointer tables allow for quick switching between jointing and thicknessing. Technical data: +Manufacturer: SCM +Type: 2250 +Planing width: approx. 500 mm +Total length of jointer tables: approx. 2,200 mm +Maximum thicknessing height: approx. 235 mm +Minimum thicknessing height: approx. 3 mm +Maximum material removal in thicknessing: approx. 8 mm +4-knife cutterhead +Cutterhead speed: approx. 4,500–5,000 rpm +Motor power: 5.5 kW +Two feed speeds: approx. 7.5 and 15 m/min +Fold-up jointer tables +Swiveling fence +Automatic workpiece feed in thicknessing +Dust extraction connection: 150 mm +Weight: approx. 890 kg +Space requirement: approx. 2,200 × 1,350 × 1,100 mm Scope of supply: +Operating manual +Parts list +Setting gauge +Replacement knives The machine is in used condition. Inspection and a test run are possible by prior appointment. Loading and transport can be arranged upon request. Location: 39340 Haldensleben Price: €4,350 net

Condition: excellent (used), functionality: fully functional, Year of construction: 2005, machine/vehicle number: NOH336-41, ABUS ELV overhead crane, crane runway, bridge crane, workshop crane Load capacity / lifting capacity: 5t - 5000kg Span: 12,990 mm, outer dimension approx. 13,250 mm Fsdpfsx Azrdex Aatjpl Year of manufacture: 2005 with radio remote control Lifting height: 6 m Construction height (top of crane to hook): approx. 850 mm Main girder length incl. buffers: approx. 260 cm Crane is dismantled and immediately available Very good condition, inspection logbook available Column-mounted and wall-mounted slewing cranes also available Demag KBK and Abus HB systems, as well as Errikla, Hadef, Stahl KT 2000 etc. Shipping by forwarding agent possible, please inquire with postcode Collection preferred

Condition: excellent (used), functionality: fully functional, working width 1350 mm, calibration unit with metal roller, combination unit with two rubber rollers and multi-segment pad, oscillation by photocells, machine function activation from control panel, belt blow-off, stepless feed speed regulation for sanding belt on 2nd unit, pneumatically controlled multi-segment pad with adjustment, year of manufacture 2007, electric table adjustment, material thickness gauge, vacuum under-table. Fpedpfx Aaozz Nmmotjl

Condition: excellent (used), functionality: fully functional, Year of construction: 2008, machine/vehicle number: CR2344, ABUS crane system, overhead crane, gantry crane, workshop crane Fpjdpfxozgbyps Aatol Load capacity / lifting capacity: 2t - 2000 kg Track gauge: approx. 14,000 mm, overall dimensions: approx. 14,200 mm Year of manufacture: 2008 (rebuilt with new chain hoist, floor control, cable track and drive units) Abus GM chain hoist, 2000 kg lifting capacity, 6 m lifting height Overall height from top of crane to hook: approx. 950 mm Head beam length with buffer: approx. 220 cm Crane is disassembled and available immediately Very good condition, inspection certificate is available We also have pillar-mounted swivel cranes and wall-mounted swivel cranes available Demag KBK and Abus HB systems, as well as Errikla, Hadef, Stahl KT 2000, etc. Shipping via freight forwarder is possible; please inquire using your postal code. Collection is preferred.

Condition: excellent (used), Year of construction: 1988, functionality: fully functional, Thickness planer PANHANS Type 426, 630mm is in very good optical and technical condition; the machine comes from a small assembly company and has only been used lightly. Everything functions perfectly. With anti-kickback device. The planing knives can be adjusted very easily and precisely; adjustment gauges are included, which can be screwed onto the knife shaft, ensuring the highest precision. The chips can be effectively removed through the closed system. With 4-knife shaft for standard strip planing knives. The thickness table is mounted on 4 trapezoidal spindles and is tilt-proof and warp-resistant. With a protective cover that can be folded up. Max. planing width 630mm, max. planing height 250mm. We will personally deliver and demonstrate the machine throughout Germany for 220.00 Euros, so you have no risk when purchasing. Delivery to other countries is also possible upon request. The machine is low-noise according to DIN 45635. With very effective feed rollers; the infeed and outfeed rollers are made of metal, and the pressure can be adjusted on both rollers. The infeed roller is ribbed and divided into individual segments; the outfeed roller is smooth. The machine table has 2 sliding rollers, which can be used if required and raised upwards. The sliding rollers can be very helpful with damp wood. With manual. The feed speed is 7 and 14 m/min; the feed is driven by a separate geared motor. With extraction port 160mm. The height adjustment of the thickness table is electric; fine adjustment is done with a handwheel. The planing height can be read very precisely on a mechanical counter. With this machine, you can achieve a very clean planing result. The powerful 7500-watt motor ensures that almost no fatigue occurs. The machine contains 4 sharpened knives. Very robust and durable design, best workmanship with the highest quality. The machine can be used immediately. 380V, 7500W Speed: 5000 rpm Fedpfjzzrquox Aatepl Year of manufacture: 1988 Weight: approx. 900kg Tested GS version. Optimal, simple, fast and safe operation. The construction of the machine is heavy, robust and durable – simply indestructible.

Condition: ready for operation (used), Year of construction: 1967, functionality: fully functional, machine/vehicle number: 1597, type of input current: three-phase, input voltage: 380 V, heating capacity: 25.5 kW (34.67 HP), ILLIG UA 150 E Thermoforming Machine + US 100 – Complete Package Description Complete ILLIG thermoforming and processing package consisting of two industrial machines, both manufactured in 1967. The package consists of an ADOLF ILLIG UA 150 E vacuum thermoforming machine together with an ADOLF ILLIG US 100 auxiliary processing machine. Both machines originate from the same production period and were used as part of a thermoforming production setup. 1. ADOLF ILLIG UA 150 E – Vacuum Thermoforming Machine Manufacturer: ADOLF ILLIG Maschinenbau, Heilbronn, Germany Model: UA 150 E Machine No.: 1597 Year of manufacture: 1967 Working / forming area: 1,500 × 1,000 mm Supply voltage: 220 / 380 V Frequency: 50 Hz Motor power: approx. 2.2 kW Heating power: approx. 25.5 kW Industrial vacuum thermoforming machine designed for forming thermoplastic sheet material. The machine is equipped with: Large 1,500 × 1,000 mm forming area Heating system Vacuum system / vacuum pump Adjustable forming controls Pressure and vacuum gauges Separate electrical control equipment Manual operating controls Fodpfjzx Ergex Aatopl Integrated working/forming table 2. ADOLF ILLIG US 100 – Auxiliary Processing Machine Manufacturer: ADOLF ILLIG Maschinenbau, Heilbronn, Germany Model: US 100 Machine No.: 536 Year of manufacture: 1967 Supply voltage: 220 / 380 V Frequency: 50 Hz Motor power: approx. 1.1 kW Band length: approx. 3,570–3,670 mm The US 100 is an auxiliary processing machine intended for secondary processing of formed components. It is equipped with a large movable working table, electrical drive, adjustable working elements, and separate electrical controls. Complete package Both machines are offered together as one complete package. The sale includes: ILLIG UA 150 E thermoforming machine ILLIG US 100 auxiliary processing machine Associated electrical/control equipment shown in the photos A quantity of unused old-stock plastic thermoforming sheet rolls is also available and can be supplied separately or included by agreement. The machines are currently installed/stored in Greece and are available for inspection by appointment. EXW Greece. Dismantling, loading, and transport are at the buyer's cost and responsibility.

Condition: used, Year of construction: 2008, functionality: fully functional, overall weight: 420 kg, iDEAL BAS 065-11 is a resistance butt welding machine for band saw blades, made in Germany by IDEAL-Werk C.+E. Jungeblodt GmbH + Co., Lippstadt. Serial no. 235529, year of manufacture 2008. Rated power 20 kVA at 50% duty cycle, primary voltage 400 V, 50/60 Hz, secondary voltage 2.5 – 4.0 V, maximum upsetting force 50 kN. Hydraulic clamping (the "-11" version): both clamping jaws are operated hydraulically by foot switch, so the operator keeps both hands free to position the blade. The hydraulic power unit with clamping pressure gauge is mounted on the machine. Welding current is selected with the step switch, flashing speed and annealing time are set on the front control panel, with a Panasonic timer for the annealing cycle. A flexible work light is fitted above the welding zone. Capacity: bi-metal band saw blades 10 x 0.7 – 41 x 1.6 mm, wood band saw blades 10 x 0.7 – 60 x 1.0 mm, stainless steel band saw blades 10 x 0.4 – 35 x 0.8 mm, band knives 10 x 0.4 – 40 x 0.8 mm, strip steel 7 – 100 mm2 cross-section (stainless up to 50 mm2), band thickness 0.4 – 2.5 mm, clamping width 60 mm. The machine is used, in working condition and repainted. Electrical cabinet, hydraulics and controls are shown in the photographs. Machine weight approx. 420 kg net / 480 kg gross, packing dimensions approx. 1150 x 1150 x 1150 mm. Make and Model: iDEAL BAS 065-11 Year of manufacture: 2008 Serial no.: 235529 Clamping: hydraulic, foot switch operation Max. upsetting force: 50 kN Voltage: 400 V Frequency: 50/60 Hz Power: 20 kVA (at 50% duty cycle) Secondary voltage: 2.5 – 4.0 V Fuse protection: 20 A Bi-metal band saw blades: 10 × 0.7 – 41 × 1.6 mm Wood band saw blades: 10 × 0.7 – 60 × 1.0 mm Fsdezz Sdzjpfx Aatspl Stainless steel band saw blades: 10 × 0.4 – 35 × 0.8 mm Band knives: 10 × 0.4 – 40 × 0.8 mm Strip steel, cross-section: 7 – 100 mm² (stainless up to 50 mm²) Band thickness: 0.4 – 2.5 mm Clamping width: 60 mm Machine weight: approx. 420 kg net / 480 kg gross Packing dimensions: approx. 1150 × 1150 × 1150 mm Condition: Used, in working order

Condition: good (used), Year of construction: 2010, total length: 1,600 mm, total width: 1,900 mm, total height: 3,200 mm, overall weight: 600 kg, For Sale: Dosing unit / flour discharge point from Kaak / Silowacht Brand: Kaak / Silowacht Type: flour discharge point Year of construction: 2010 The height is adjustable, the total height is approximately 3.20 meters. The flour discharge point can be mounted on a pole / column. Diameter of the lower filling point: 99 cm Maximum weight of flour: 100 KG Included: - weighing hopper for flour / meal - load cells Fpodezv S Nmjpfx Aatjl - water weighing hopper unit - filter unit - pneumatic valves - level gauges - liquid yeast meter, valve and connection - Siemens S7-1500 (Siemens control system) - piping, if required It is possible to inspect this machine on-site. If you have any questions or comments, please feel free to contact us.

Condition: new, functionality: fully functional, working height: 600 mm, Mitutoyo 192-614-10 Digimatic is a high-precision digital height gauge with a rigid double-column design for accurate and stable measurements. It offers a 0–600 mm measuring range, switchable 0.005/0.01 mm resolution and ±0.05 mm accuracy. Equipped with a clear LCD display, fine/coarse adjustment and Digimatic data output. New, in original package. Two are available. Fsdpozulbajfx Aatopl

Condition: good (used), MEASURING ROD SET in wooden box, 3 pieces Fedpfozazplsx Aatopl - 3 pieces, length in wooden transport box DIN 875 - Quality 1 - 2 pieces, length 1600 mm - 1 piece, length 2700 mm - Total weight approx. 170 kg Errors and omissions excepted.

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, working width 2700 mm Fsdpezxp U Eofx Aatjpl working height 100 mm hydraulic cutting gauge adjustment to size cast body power supply 400V 3000 kg Year of manufacture 2004

Condition: excellent (used), Year of construction: 2009, machine/vehicle number: Numer fabryczny maszyny B0503A0341, functionality: fully functional, operating hours: 29,000 h, For sale, a used TRUMPF TruBend 5085 edge bending machine, manufactured in 2009. The machine is in unique technical condition – very good! The machine has a low number of operating hours – 8250. In 2020, the control system was replaced with a new one at an operating hour count of 20500. The actual total operating hours of the machine are 29000. Machine serial number: B0503A0341 Hydraulics: Hoerbiger Year of manufacture: 2009 Maximum pressing force: 850 kN Working length: 2720 mm Opening: 415 mm, Throat: 420 mm Power: 17 kW Voltage: 400 V Hydraulic oil tank capacity: 120 l Hydraulic system pressure: 300 bar Weight: 7800 kg Tool type: hydraulic Wila / Trumpf Control system: TASC 6000 Fpsdpfx Aaoy Tluyotjl - Upper drive in a four-cylinder version Y1/Y2 - 4-axis back gauge - X, R, Z1, Z2 Hydraulic upper tool clamping system WILA Hydraulic lower tool clamping system WILA CNC crowning BendGuard Preparation for ACB

Condition: used, Year of construction: 2012, machine/vehicle number: 7363126525, Item No. 26261 Hydraulic CNC Press Brake Technical data: - Pressing force 320 t - Working width 3050 mm Fpodpszzzcmjfx Aatol - Distance between uprights 2550 mm - Overhang 460 mm - Installation height approx. 630 mm - Ram stroke 365 mm - Motor power approx. 37 kW - Space requirement approx. W 5700 x H 3250 x D 2450 mm - Weight approx. 17500 kg - Including: - Pivoting arm – control panel with control system CYBELEC EVA-10S; Y1 + Y2; X, R, Z - Motorized back gauge - Motorized crowning - Safety light curtain - Electric foot pedal - 4-way universal die, split - V-dies - Split top tool set, various other tools

Year of construction: 1975, condition: good (used), functionality: fully functional, drive type: Diesel 130 Kw, Patrol boat from the former GDR, later used by the Berlin Water Police (WSP 1), IFA 6-cylinder diesel engine. Winter-capable, icebreaker rating up to 3 cm thickness, certified for all waters including open sea. Dimensions: 11.90 m length, 2.90 m beam, draft 0.90 m. Top speed: over 30 km/h. Engine: Schönebeck 6-cylinder, 4-stroke diesel, type DM 6 VD 14.5/12-1. According to research, the engine delivers either 170 or 220 HP from 10 L displacement. These engines are known for low fuel consumption: at canal cruising speeds (8–12 km/h), consumption is 6–8 L per hour. Equipment includes signal mast, mast spotlight, boat lighting. Dual helm positions: inside cabin and flybridge. AGM batteries, engine start with 24 V system, 12 V onboard network. Brand new onboard toilet. Electric and manual bilge pumps (automatic/manual operation). Complete overhaul from 2021 to 2023: 5-layer primer and 3-layer antifouling coating. Steel hull, aluminium superstructure. New electrical wiring, new exhaust system, new clutch, engine overhauled, fuel tank serviced, new lines installed, new air filter. Fpedpfey D Rk Ijx Aatol Engine starts and runs flawlessly, forward and reverse gear shifts without issues. Some work is still required to complete comfort features. The vessel is suitable as a small tugboat or as a work or fishing boat. Lower helm station: the gauges still need to be installed; required instruments and switches are included.

Condition: ready for operation (used), Year of construction: 2009, pressure 170 t chamfer lenght 3170 mm distance between columns 2700 mm column arm 420 mm dayligth 620 mm stroke 350 mm ajustment speed 160 mm/sec working feed 10.0 mm/sec return speed 100 mm/sec oil volume 280 L 0 300 bar controlled axis 7 Anzahl Number of working hours ca. 51.500 h total power requirement 16.5 KW weight of the machine ca. 12700 kg range L-W-H 4550 x 2650 x 3150 mm "LONG STROKE" special version Excellent condition (!!) Original price approx. 200.000 Euro Special price on request ----- "LONG STROKE" electro-hydraulic press brake featuring: * Increased daylight opening (installation height) = 620 mm * Increased cylinder stroke = 350 mm ----- Equipment: - Electro-hydraulic CNC press brake - AMADA CNC control "AMNC" - 7 axes (X1+X2, Y1+Y2, R, Z1+Z2) * Swiveling control unit - front left * Touchscreen control panel * Tool & program library * Incl. handheld control unit for manual axis movement - CNC-controlled backgauge adjustment (X1+X2) * Adjustment range .. 700 mm * Adjustment speed .. 500 mm/sec. - CNC-controlled vertical adjustment of gauge fingers (R-axis) * Adjustment range .. 250 mm * Adjustment speed .. 160 mm/sec. - CNC-controlled left-right adjustment of gauge fingers (Z1+Z2) * Adjustment speed .. 1000 mm/sec. - AMADA manual upper tool clamping system * Type: WILSON TOOLS Express * Vertical tool loading/unloading possible * Incl. 1x set of sectional ROLLERI upper tools * "TOP 175.60.R2" ... H 143.8 + 30 mm / 60 degrees - AMADA lower tool holder * Incl. sectional / reversible 4V die * V-openings: 16/32/35/50 mm - FIESSLER laser safety system (front of machine) * Motorized adjustment * Model series: "AKAS III 150" - Side safety guards (swinging doors) - Rear safety guard (swinging door) Fpodpszz S D Iefx Aatel - 1x movable dual foot pedal - Front emergency stop button - Original operating manual

Condition: excellent (used), functionality: fully functional, Year of construction: 2003, machine/vehicle number: NOH366, ABUS ELV Crane Skyline Crane Runway Bridge Crane Hall Crane Crane There are 3 identical cranes available! Load capacity / Lifting capacity: 5t - 5000KG Span: 14,260mm, external dimension approx. 14,500mm Year of manufacture: 2003, with radio remote control and pendant control as backup Fodpsxtyvpjfx Aatspl Lifting height: 6m Overall height (top of crane to hook): approx. 900mm End carriage length with buffer: approx. 280cm Further data to follow Crane is dismantled and immediately available Very good condition, inspection book is available Column-mounted slewing cranes and wall-mounted slewing cranes also available Demag KBK and Abus HB systems, as well as Errikla, Hadef, Stahl KT 2000, etc. Shipping via freight carrier possible, please enquire with postcode Collection preferred

Condition: used, Year of construction: 2004, functionality: fully functional, machine/vehicle number: 56535, Double-face circular knitting machine with electronic needle selection, Mayer & Cie. model OVJA 1.6 E, machine number 56535, year 2004. Manufactured in Germany and CE marked on the nameplate. NAMEPLATE DATA: Nominal diameter: 660 mm / 26 inches · Gauge: 20 E · Pitch: 1.27 mm · Number of needles: 1638 · Operating voltage: 380 V · Control voltage: 24 V · Frequency: 50 Hz · Power: 4.0 kW · Electrical diagram number: 191353.2 APPLICATION: Double-face knitted fabric with electronic jacquard: fabrics for mattresses, quilts, cushion covers, and outerwear. EQUIPMENT: Mayer & Cie. control cabinet with display and programming keyboard · Main switch and start/stop push-button panel · Complete perimeter guards · Official Mayer & Cie. service sticker on the cabinet CONDITION: Complete machine, assembled and not disassembled. Fabric remains in the machine from the last production run. An inspection visit and on-site operational test can be arranged. DIMENSIONS AND TRANSPORT (approximate): Length 2.70 m · Width 2.00 m · Height 2.70 m · No need to disassemble it to move it out of the building · Location: Albacete, Spain IMPORTANT NOTE FOR EXPORT: The electrical panel indicates 50 Hz. Before purchasing from a country with a 60 Hz power grid, please consult us. Fedpszvht Isfx Aatspl The number of feeders has not been counted; it will be confirmed upon request.

Condition: excellent (used), Year of construction: 2014, Technical specifications: Fsdpfx Aaszz Afvetopl Type: 75.06-2 6400 x 1.5 mm CNC XXL-CENTER Double bending machine Working length: 6400 mm Bending capacity steel: 1.5 mm Bending capacity stainless steel: 1.0 mm Bending capacity aluminum: 3.0 mm CNC control Rear gauge depth: 750 mm Motor power: 6 kW Dimensions (length x width x height): approx. 7500 x 2100 x 2050 mm Weight: approx. 12 tons The seller is not liable for typographical or data transmission errors. The machine's appearance, technology, and wear and tear are consistent with its age; used machines are sold without any warranty.

Year of construction: 2023, operating hours: 200 h, condition: excellent (used), functionality: fully functional, machine/vehicle number: 230608, 4. Main Extruder Type: CWT95-Plus co-rotating twin-screw extruder; L/D 48 Machine Description: *IE5 AC 250 kW motor *Gearbox: Precise balancing principle applied to increase torque level; High safety factor design; Latest steel alloy material for gears, applied with special heat treatment and manufactured to a high level of precision; Imported NSK bearings and sealing rings; Special lubrication system combined with immersion and forced lubrication solutions; Latest generation plate heat exchanger configured for optimal cooling; Input/output rotation speed: 1480/600 rpm; Torque: 2x1990 N.M Oil pump: 1.5 kW With heat exchanger, flow meter, oil pressure gauge *Power Transmission: Compomac safety clutch torque limiter from Italy, with speed sensor *Extrusion Line: Screw diameter: 93 mm, L/D: 48:1; Maximum screw speed: 600 rpm; Screw configuration: modular structure, torque transmission via splines; Screw material: W6Mo5Cr4V2, surface hardness HRC58～64; Barrel configuration: modular structure, each barrel with a length of 4L/D; The inner surface of the linear material is made of α101, surface hardness is HRC62-64; Barrel No.1: Feeder for all possible components, No. 4 and No. 6 with a side feed port and a venting port. No. 8, 9, 11 with a suction port for degassing. Fjdpfxezxxifj Aatspl The screw profile will be determined based on the requirement. *2 side feeders for lateral feeding *1 set of degassing adapted to the needs Liquid ring pump, 1m3 water tank, gas and vapor recovery system *Electrical Cabinet Enclosure: Rittal Heat Exchanger: Apex Variable Frequency Drives: ABB PLC: Siemens Components: Schneider Electric *Spare Parts One set of screw and barrel elements and one set of shafts will be delivered with the machine.

Condition: excellent (used), functionality: fully functional, Robust Möhringer auxiliary wagon in steel construction. Reinforced. Can also be used as an auxiliary wagon for other clamping trolleys with a 900 mm gauge, such as Linck, Weiss, Mayerhofer, etc. Gauge: 900 mm. Wagon height: 420 mm. Tilting carriage with continuous chain, powered. Fpedpfjwv Rcujx Aatsl Hydraulic carriage for round timber, hydraulically adjustable and tiltable. Feeding from both sides possible. Technically inspected.

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, operating hours: 77,000 h, pressing force: 170 t, stroke length: 445 mm, overall weight: 16,000 kg, year of last overhaul: 2026, Equipment: CE marking, documentation/manual, TRUMPF TrumaBend V1700S / 4m bending length Year of manufacture: 2006 Press force: 1700 kN (170 tons), bending length: 4080 mm Machine operating time: 77,000 hours, hydraulic operating time: 48,000 hours New IPC (KEBA 5) Configuration 1 active bending aid, 2 support consoles 4-axis back gauge Fodszrnrcspfx Aatepl CNC-controlled crowning Hydraulic upper tool clamping Hydraulic lower tool clamping I-axis BendGuard Last inspected and measured by Trumpf 6/2026

Condition: as good as new (ex-display), functionality: fully functional, Year of construction: 2026, total length: 3,200 mm, For sale: a new CIDAN RAPIDO 32 electric guillotine from our showroom. The machine has not been used in production and is connected and fully ready for operation. It can be viewed in person, tested, and trial cuts can be performed. The machine is in stock – fast delivery is possible. The CIDAN RAPIDO is a fast and reliable electric guillotine designed for precise sheet metal cutting. The machine can perform up to 35 cuts per minute, making it ideal for both individual jobs and intensive series production. The drive system with eccentrics, the material clamping system, and the sheet support elements mounted close to the blades allow for convenient and precise cutting, even of narrow strips. The guillotine has angular supports on both sides of the front table, ensuring accurate sheet feeding at a 90° angle. LED lighting in the cutting area allows the operator to clearly see the cutting line. Fjdpfxszz Rqts Aatjpl Key information: Manufacturer: CIDAN Machinery Model: RAPIDO 32 Condition: New / showroom machine Working length: 3200 mm Max. steel thickness: 2.5 mm Max. stainless steel thickness: 1.6 mm Max. aluminum thickness: 3.7 mm Cutting speed: up to 35 cuts/min. Weight: approx. 2100 kg CUTLINK control and automatic back gauge The guillotine is equipped with the CIDAN CUTLINK control system – a fast and easy-to-use program that allows up to 10 different operations to be programmed simultaneously. After the operator enters the required dimensions, the 750 mm automatic back gauge automatically adjusts to the required position, allowing for quick and accurate cutting of different widths. Sheet support and return The pneumatically controlled sheet support system allows for control of the material during cutting. After cutting, the cut sheet is directed to the front material trolley, so the operator does not need to collect parts behind the machine. The trolley can be easily removed and transported, and also picked up with a forklift. Additional equipment included with this machine: Telescopic extension of the front table up to 800 mm from the cutting line – for easier positioning and support of large sheets. Material trolley – for collecting cut sheets and convenient transport to bending or other machines. LED cutting area lighting. Automatic 750 mm back gauge. CUTLINK control system. Ideally suited for sheet metal processing, roofing and facade manufacturing, ventilation, and other sheet metal processing companies. The machine is located in our showroom, connected, and ready for demonstration. Fast delivery is possible. If you have any further questions, please do not hesitate to ask.

Condition: used, Year of construction: 1975, Wood Format Saw KAMRO type FK Maxi Rotation: 4000 RPM Year of construction: 1975 Blades dimensions: Ø 400 x 3,5 x 30 mm (blade not supplied with the machine) Back gear gauge length: 1500 mm Voltage: 380 V Length: 2600 mm Depth: 2000 mm Fjdpfozy Rt Sox Aatjpl Weight: 800 kg