Used Gildemeister Nef 720 for sale (253)

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, Gildemeister NEF 320 K lathe cycle-controlled Siemens Sinumerik 810 DL control built in 2001, very good original condition Technical data: >> Built in 2001 >> Swing diameter over bed: 320 mm >> Swing diameter over slide: 150 mm >> Distance between centers: 750 mm >> Plane travel: 185 mm >> Feed X: 4 m/min >> Feed Y: 4 m/min >> X rapid traverse: 8 m/min >> Y rapid traverse: 10 m/min >> Spindle head DIN 55027 size 6 >> Spindle bore: 52 mm >> Drive power 100%: 7 kW >> Speed range: 14-3550 (2 levels) rpm >> Tailstock quill diameter: 70 mm >> Tailstock quill stroke: 120 mm >> Tailstock quill taper: ISO MK 5 >> Dimensions: 2600 X 1440 X 1440 mm >> Weight of the machine approx.: 2.0 t Accessories and equipment: >> 1 three-jaw chuck Röhm 200mm with 2 sets of jaws >> Mulifix size B with 4 steel holders >> Operating instructions, electrical plans >> Machine feet About the machine: Credpov Aix Aofx Abcjh Offered is a Gildemeister NEF 320 K lathe with automatic cycles, built in 2001, in very good condition. The machine is of course fully functional. The slides all run very smoothly and evenly. The Gildemeister runs very quietly even at high speeds. This newer generation of lathes is very user-friendly and surfaces can be produced as if they were ground. The machine comes from a training workshop of a large company. Take the opportunity to inspect this machine on site under power and convince yourself of its condition.

Condition: used, Year of construction: 2008, Technical details: turning diameter: 600 mm turning length: 1250 mm x-axis: 320 mm z-axis: 1250 mm Turning diameter via slide: 410 mm Csdpfx Aow Nw D Rjbcerh speeds:: 3000 U/min tool turret: 8-fach tailstock taper MT: 5 spindle bore: 90 mm total power requirement: 42 kVA dimensions of the machine ca.: 4000 x 2200 x 2000 mm weight of the machine ca.: 5,5 t

Condition: good (used), Year of construction: 2002, Gildemeister NEF 520 K Gildemeister NEF 520 K Cycle-Controlled Lathe with Siemens Sinumerik 810 DL Control, year of manufacture 2012, in excellent original condition. The machine comes from the training workshop of a renowned German mechanical engineering company. Technical Details Swing diameter over bed: 500 mm Crodpfx Ajw Iqd Isbceh Swing diameter over cross slide: 290 mm Turning length: 1,250 mm Control: Siemens Simatic Cross slide travel: 260 mm Distance between centers: 1,500 mm Main Spindle: Speed range – main spindle: 8 - 3,000 rpm Drive power – main spindle: 12 kW Max. torque: 920 Nm Gear stages: 2 Spindle nose: No. 8 DIN55027 Spindle diameter in front bearing: 120 mm Max. bar capacity: 62 mm Spindle mount: ME80 Chuck diameter: 250 mm Tool Turret: Tool system: MultiFIX - C Tailstock: Quill diameter: 80 mm Quill taper: MT 5 Quill stroke: 180 mm Feed Rates: Rapid traverse x/z: 4 / 6 m/min Feed force x/z: 5 / 10 kN Total power requirement: 28 kVA Machine weight approx.: 3.0 t Space requirements approx.: 3.5 x 2.5 x 2.0 m Accessories and Equipment: 1 coolant system About the machine: We are offering a Gildemeister NEF 520 K cycle-controlled lathe, year of manufacture 2012, in very good condition. The machine is, of course, fully functional. All slides run very smoothly and evenly. Even at high speeds, the Gildemeister operates very quietly. This latest generation of lathes is extremely user-friendly and can produce surface finishes comparable to grinding. Take the opportunity to inspect the machine under power at our premises and see its condition for yourself.

Condition: like new (used), Year of construction: 2011, operating hours: 80 h, Technical Data: Turning diameter: 350 mm Crodpfxjw Dqbao Abceh Turning length: 650 mm Swing diameter over bed: 385 mm Swing diameter over cross slide: 350 mm Distance spindle nose – tailstock: 902.5 mm Main spindle: Speed range – main spindle: 0 – 4,000 rpm Drive power – main spindle: 15.3 / 11.5 kW Max. torque: 430 Nm Spindle diameter at front bearing: 100 mm Spindle bore: 87 mm Max. bar diameter: 52 mm Usable bar diameter: 52 (45) mm Max. chuck diameter: 250 mm Chuck diameter: 165 mm Spindle head: 170 h5 C-axis: 0.04° Turret: Number of tool stations: 12 pos. Shank diameter DIN 69880: 30 mm Driven tool stations: Number of driven tool stations: 6 pos. Speed range – driven tool stations: max. 4,500 rpm Drive power driven tool stations: 5.5 kW Travel: X-axis: 255 mm Z-axis: 800 mm C-axis Tailstock: Tailstock travel: 680 mm Tailstock taper: MK 4

Condition: used, Year of construction: 2006, Technical details: Crsdpjwtct Hsfx Abcjh turning diameter over bed: 500 mm turning dia. over face-slide: 290 mm turning length: 850 mm centre distance: 850 mm longitudinal traverse (z-axis): 900 mm facing movement (x-axis): 260 mm control: Manuaplus 4110 revolution per minute: 10 - 3000 / 2x seples U/min max. torque on the spindle: 920 Nm spindle bore: 70 mm facing movement (x-axis): 8 m/min. longitudinal traverse (z-axis): 10 m/min. operating hours - idle run: ca. 34.600 h tailstock taper ISO: MK 5 tailstock quill stroke: 180 mm total power requirement: 24 kVA Weight approx.: 5,2 t dimension machine xH: 2,2 x 3,2 x 1,9 m Multifix steel holder size C 3-jaw chuck Ø 250mm chip tray manual hour counter live center in tailstock Operation control panel and monitor Accessories: 4-jaw chuck Ø 250mm with internal jaws various chuck keys Machine lighting 8x foot plates 4x wedge lifters various pairs of jaws 1x bezel Ø 100mm closed *

Condition: good (used), Year of construction: 2007, operating hours: 14,029 h, functionality: fully functional, turning diameter over cross slide: 270 mm, turning length: 650 mm, turning diameter: 400 mm, spindle bore: 65 mm, spindle speed (max.): 4,000 rpm, For sale is a Gildemeister NEF 400 CNC lathe. The machine is in good condition, ready for immediate use, and fully functional. Technical specifications: Year of manufacture: 2007 Control: Heidenhain CNC Pilot 4290 Operating hours: 14,029 h X-axis (transverse travel): approx. 220 mm Z-axis (longitudinal travel): approx. 700 mm Csdjwig R Ispfx Abcorh Max. turning diameter: approx. 400 mm Max. swing diameter over bed: 400 mm Max. swing diameter over cross slide: 270 mm Max. turning length: 650 mm Spindle bore: 65 mm Speed range: 0 - 4,000 rpm Drive power (100% duty cycle / 40% duty cycle): 12/15 kW Max. torque: 400 Nm Number of tool positions: typically 8 Tool holder: VDI 30 Tailstock travel: 680 mm Tailstock mount: MT 4 Clamping pressure: approx. 6.8 kN (hydraulic) Space requirement (L x W x H): approx. 2.5 x 1.7 x 1.8 m Machine weight: approx. 2.8 t Chip conveyor included in the offer Accessories such as tool holders are not included in the offer Can be offered separately Transport and loading can be arranged throughout Europe upon request for an additional charge. Prices plus VAT Viewing possible by appointment. Contact us; our team will be happy to assist you. Trade-in or exchange possible! Machine Purchase / Sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE Do you need a high-quality, yet affordable metalworking machine for your production? Or do you want to sell yours? For further information or to contact us, please visit our website

Condition: excellent (used), Year of construction: 1997, Hello. I have for sale CNC cyclic lathe GILDEMEISTER NEF 500 prod. year 1997. The machine is very accurate, ideal for turning single pieces as well as short series, you can work on it in conventional mode as well as programming. Programming is very easy consisting of filling in very simple and clear cycles, it is especially recommended to lathe beginners in the subject of CNC. The machine is connected with the possibility of testing and training in the operation and programming of the machine To the machine adds DTR Documentation If you want to speed up the execution of individual parts, this machine is ideal for such tasks TECHNICAL AND VISUAL CONDITION: Very Good Country of manufacture: Germany Machine parameters: - Control: Heidenhain Manual Plus - Quick-change knife vise - 3-jaw chuck fi 250mm Forkard - max. revolutions 2800rpm - three-stage gearbox - max. turning diameter X axis = 500mm - max. length of turning Z axis = 1000mm - cooling system - tailstock Crsdpor Rn Nujfx Abcoh - central lubrication of the slide - chip tray - spindle opening Fi-71mm - DTR - machine weight: 3800 kg I issue VAT invoices 23% price includes loading The machine after a full overhaul. Working 100%. Connected and ready to work. WE ALSO HANDLE ALL PROCEDURES RELATED TO LEASING!!! Stal-Com company for 17 years we are engaged in sales, service and training on CNC machines from DMG group. We specialize in all models of Gildemeister lathes and Deckel Maho Machining Centers. All machines undergo a meticulous technical inspection. In addition to customers from Poland, our machines are also bought by customers from all over Europe and parts of Asia. Each machine can be checked during production as we also do machining. After purchasing a machine from our company, we provide training for the crew as well as we can set up the production of details at the customer's site. We cooperate with many companies on a permanent basis to which we provide further machine tools.

Condition: good (used), Year of construction: 2001, Gildemeister NEF 520 CNC Lathe TECHNICAL DATA Working Area Swing over bed: 500 mm Swing over cross slide: 290 mm Chuck diameter: 250 mm Cross travel: 260 mm Center distance: 850 / 1350 mm Turning Spindle Spindle head DIN 55027 Size: 8 Spindle bore diameter: 70 mm Spindle mount: metric 80 Spindle diameter in front bearing: 120 mm Main drive AC Csdpfowftviex Abcorh Drive power: 12 kW Max. torque: 920 Speed range: 10 – 3000 rpm Gear ratios: 2 Switchable speeds: Continuously variable Feed drive X-feed force: 5000 N Z-feed force: 10000 N X-rapid traverse: 8 m/min Z-rapid traverse: 10 m/min Multifix tool carrier; Size: C Tailstock Quill diameter: 80 mm Quill stroke: 180 mm Quill mount: MK5 Dimensions L x W x H: 2900 x 1953 x 1825 mm Weight: 2700 kg SCOPE OF OFFER INCLUDES (list not exhaustive): Gildemeister lathe SMW Autoblok Hi-Grip high-precision chuck Chuck jaws Multifix tool holder Complete operating documentation Exact scope of offer as shown in the photo gallery We assume no liability for the accuracy, completeness, or timeliness of the information provided.

Condition: like new (used), Year of construction: 1999, gildemeister NEF 320 in near mint condition!! heidenhain manual plus year of manufacture: 1999 chuck: Schunk Rota-s 160-42 Crjdpfxewa Dgns Abcjh max. turning diameter over bed: 320 mm max. turning diameter over slide: 150 mm max. turning length: 500 mm max. distance between centers: 750 mm 2 multifix holders on the bed spindle: 10-4000 rpm spindle bore: 50.8 mm 9 kW documentation incl. tool holders machine is powered for inspection

Condition: used, Year of construction: 2001, functionality: fully functional, center width: 1,000 mm, turning diameter over bed slide: 500 mm, For sale is a cycle-controlled lathe of the Gildemeister brand and type NEF 520 K The machine is fully functional, the guides are somewhat worn but still functional Technical data: Gildemeister universal lathe NEF 520K Year of manufacture: 2001 Control: Siemens Touch Panel Rotation Ø over bed: 500mm Rotation Ø over facing slide: 290mm Crjdpfx Ajtrmrxjbcoh Face travel: 260mm Center distance: 1000mm Drive power 12 KW 1st gear stage 8 - 750 rpm 2nd gear stage 32 - 3000 rpm Quill Ø: 80mm Quill holder: MK5 Quill stroke: 180mm Three-jaw manual chuck: Ø250mm Four-jaw manual chuck: Ø250mm Tool holder: Multifix size C Fixed vice with jaws and rollers, guide Ø10 - 115 On request, loading and transport can be organized for an additional charge All prices plus VAT Viewing possible by appointment. Contact us, our team will be happy to help you. Trade-in or exchange possible! Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours?

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, turning length: 1,185 mm, turning diameter: 640 mm, spindle speed (max.): 4,000 rpm, turning diameter over bed slide: 640 mm, counter spindle torque (max.): 5,000 Nm, Turning and Milling Center with Main and Counter Spindle and Comprehensive Equipment! TECHNICAL DETAILS Turning diameter: 640 mm Turning length: 1,185 mm Swing diameter: 640 mm Distance between headstocks: 1,500 mm SLIDE I X-Axis travel: 550 mm Y-Axis travel: 180 mm Z-Axis travel: 1,185 mm B-Axis: 240° Feed rate X-axis: 0 – 40,000 mm/min Feed rate Y-axis: 1 – 24,000 mm/min Feed rate Z-axis: 1 – 70,000 mm/min Feed rate B-axis: 1 – 20 rpm Rapid traverse X/Y/Z: 40 / 24 / 70 m/min Feed force X/Y/Z S6: 7.00 / 11.00 / 7.50 kN Tool interface: HSK 63 Milling spindle speed: 10 – 12,000 rpm Drive power 100% duty cycle: 13.20 kW Drive power 40% duty cycle: 22.00 kW Milling spindle torque: 60 / 100 Nm Max. tool length: 350 / 200 mm Tool diameter: 80 mm Tool diameter with 2 free pockets: 120 mm Max. tool weight: 6 / 10 kg SLIDE II X-Axis travel: 180 mm Z-Axis travel: 1,050 mm Feed rate X-axis: 1 – 24,000 mm/min Feed rate Z-axis: 1 – 36,000 mm/min Rapid traverse X + Z axes: 24 / 36 m/min Feed force Z / X S6: 11.00 / 9.00 kN Turret (positions): 12 Tool holder: DIN 69880 Ø40 Driven tool positions: 12 Speed: 1 – 4,000 rpm Drive power 100% duty cycle: 10.70 kW Torque S1: 32 Nm SLIDE III Z-Axis travel: 1,150 mm Feed rate Z-axis: 1 – 36,000 mm/min Rapid traverse Z-axis: 36 m/min Feed force Z-axis S6: 13.00 Nm MAIN SPINDLE Model: ISM90 Cjdpjxf A Edjfx Abcsrh Speed: 10 – 4,000 rpm Drive power 100% duty cycle: 36.00 kW Drive power 40% duty cycle: 45.00 kW Torque at 40% / 100% duty cycle: 800 / 630 Nm Spindle bore: 80 mm COUNTER SPINDLE Speed: 10 – 5,000 rpm Drive power 100% duty cycle: 21.00 kW Drive power 40% duty cycle: 28.00 kW Torque at 40% / 100% duty cycle: 320 / 240 Nm Spindle bore: 80 mm MACHINE DETAILS Electrical Data Total power requirement: 70.00 kW Dimensions & Weight Machine weight: approx. 20.00 t Footprint: approx. 8.50 x 4.50 x H3.10 m Control Control manufacturer: Siemens Control model: SINUMERIK 840D EQUIPMENT Chip conveyor Oil mist separator DMG Automation WH10top Main spindle ISM90: Hollow chuck, C-axis, 3-jaw power chuck SMW-AUTOBLOK KNCS-NB-315-91 Counter spindle ISM76: Partial hollow chuck, C-axis, 3-jaw power chuck SMW-AUTOBLOK KNCS-NB-315-91 Pick-off unit with integrated conveyor belt Automatic safety cover Differential pressure clamping With pump stand for coolant: Pump 1: 17 l/min at 80 bar / Pump 2: 20 l/min at 8 bar / Pump 3: 40 l/min at 20 bar Hainbuch collet chuck including collets Ø30, 45, 50, 55, 60, 65, 72, 82, 85, 90 1 workpiece pick-off for turret

Condition: used, Year of construction: 2001, This Gildemeister CTX-400 S2 horizontal lathe with CNC control, model: CTX 400 Series 2, is being auctioned in our industrial auction/machinery auction for mechanical engineering companies – machinery park clearance & restructuring, online. You will find this and many more items on our platform. Crodpfx Aexlhriobcjh

Condition: used, 2 CNC turning-milling centers CTX 410 - YOM 2005 and 2007 Heidenhain Plus IT control Cjdpfexlthvox Abcsrh - 3-jaw chuck - driven tool stations - tailstock - chip conveyor - coolant tank

Year of construction: 2008, condition: ready for operation (used), Control Unit Brand HEIDENHAIN Model CTX 420 Main Drive Number of axis 3 Csdpfxsxllkio Abcerh Additional Equipment Chip conveyor Oil mist separator via mechanical industrial filter, 1500 m³/h Package bar processing G Signal light 4-color Hollow clamping device, Ø 68 mm Lifting beam included This Gildemeister CTX 420 linear was manufactured in 2008. A robust horizontal turning machine featuring HEIDENHAIN Plus iT CNC control, tool drive, C-axis, Y-axis, and a chip conveyor. It includes a tailstock and a tool measuring device. The tool turret was completely overhauled this year. Consider the opportunity to buy this Gildemeister CTX 420 linear horizontal turning machine. Contact us for more information about this machine. Application Types Turning

Condition: used, Year of construction: 2007, turning length: 2,080 mm, turning diameter: 800 mm, spindle speed (max.): 2,500 rpm, travel distance X-axis: 383 mm, travel distance Z-axis: 2,100 mm, total height: 2,297 mm, workpiece weight (max.): 1,200 kg, overall weight: 12,000 kg, bar passage: 121 mm, center width: 2,455 mm, bar diameter: 121 mm, controller manufacturer: SIEMENS, controller model: 840 D, power: 58 kW (78.86 HP), distance between centers: 2,455 mm, machining diameter: 800 mm, number of spindles: 1, space requirement length: 6,521 mm, space requirement width: 2,717 mm, CONTROLS .. CNC controls SIEMENS 840 D BASIC FUNCTIONS .. design principle: inclined bed .. number of spindles: 1 .. number of x/z slides: 1 .. number of turrets: 1 .. live positions: no WORKING RANGE TURNING .. swing diameter (max): 800 mm .. turning diameter (max): 600 mm .. bar diameter (max): 121 mm .. worpiece length max.: 2080 mm .. workpiece weight max.: 1200 kg MAIN SPINDLE .. spindle revolutions (max): 2500 /min .. drive power S6 40%: 52 kW .. drive power S1 100%: 40 kW .. spindle diameter: 180 mm .. spindle bore diameter: 136 mm X/Z SLIDE .. Z-axis travel: 2100 mm .. X-axis travel: 382.5 mm .. traverse velocity Z (max): 35000 mm/min .. traverse velocity X (max): 60000 mm/min .. tool fixture: Turret .. number of tool positions (total): 12 TAILSTOCK .. distance betw. centers (max): 2455 mm .. sleeve stroke: 2100 mm .. sleeve diameter: 150 mm .. holding force (max.): 180 kN ELECTRICAL SPECIFICATIONS .. total power consumption: 58 kW .. mains power supply: 73 kVA Csdpfx Asxlh I Rebcjrh .. mains voltage: 400 V .. mains frequency: 50 Hz DIMENSIONS / WEIGHTS .. space requirements -left/right-: 6521 mm .. space requirements -front/back-: 2717 mm .. total height: 2297 mm .. total weight approx.: 12000 kg ATTACHMENTS (TURNING) .. self-centering chuck: 1 .. - clamping diameter: 400 mm .. tailstock: yes .. steadies (number): 1 .. chip conveyor: yes .. coolant unit: yes .. coolant through turret: yes .. European CE standards: yes

Condition: excellent (used), Year of construction: 2008, operating hours: 50,305 h, functionality: fully functional, machine/vehicle number: 02260008351, turning length: 600 mm, turning diameter: 324 mm, spindle bore: 72 mm, spindle speed (max.): 5,000 rpm, travel distance X-axis: 185 mm, travel distance Y-axis: 40 mm, travel distance Z-axis: 620 mm, rapid traverse X-axis: 4 m/min, rapid traverse Y-axis: 7 m/min, rapid traverse Z-axis: 7 m/min, total height: 2,080 mm, total length: 4,890 mm, total width: 2,460 mm, overall weight: 6,500 kg, bar passage: 45 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC 530, counter spindle speed (max.): 7,000 rpm, counter spindle bore: 57 mm, number of slots in tool magazine: 12, Equipment: documentation/manual, - Driven tools: 12 Csdpfxewun Nve Abcerh - Tool holder: VDI 40 - Power of driven tools: 12 kW - Torque: 10.5 Nm - Speed: 4,500 rpm - Including tool package - Including band filtration system - Including bar feeder MKE HL 12 PN, year of manufacture 2008

Year of construction: 2003, condition: good (used), Sub-spindle, Y-axis, B-axis SIEMENS 840D Powerline Turning diameter max 200mm Turning length -635mm Swing Diameter -250mm Spindle speeds main & sub-spindle 20-7000 rpm Turret head 1+2: 12 driven positions B-Axis, upper turret head +135/-45° Crodpfx Abjglf A Hjcoh Misc. accessories MARCELS MASCHINEN CH

Condition: used, Year of construction: 2008, turning diameter 250 mm turning length 1185 mm control Siemens 840 D Cjdpfx Aboxiy Dfjcsrh total power requirement 21 / 28 kW

Condition: used, Year of construction: 2009, turning diameter 410 mm turning length 800 mm greates pass round over bed 700 mm control Heidenhain TurnPlus IT CNC Pilot spindle passage Ø 65 Teilhohlspannung mm spindle speed: 25- 5000 U/min spindle motor 25 kW max. torque on the spindle 280 Nm no. of tools in turret 1 12 VDI 40 driven stations 12 VDI 40 speed of driven tools 4000 U/min drive milling spindle 5,6/ 11,3 kW y-axis +/- 60 mm sup spindle 15 kW Spindlespeed subspindle 20- 6000 U/min rapid traverse 30/22,5/30 m/min tail stock Gegenspindle/Subspindle range L-W-H 4,7 x 2,7 x 2,0 mm weight of the machine ca. 6,5 t CNC lathe with driven tools, Y- axis and sub spindle - 3 jaw chuck SMW 315 BH main spindle - 3 jaw chuck SMW 250 BH sub spindle - chipconveyor - oil mist collector LTA - automatic door Crjdpfxsurnggo Abcjh - coolant pistol - partly hollow spindle Ø 65 x 840 mm

Year of construction: 1998, condition: ready for operation (used), Control Unit Brand HEIDENHAIN Additional Equipment Noise emission values: 77 dB (continuous sound pressure level) This Gildemeister CTX600E was manufactured in 1998. It features a turning length of 1000 mm, a spindle bore of 107 mm, and a chuck size of 315/400 mm. The machine offers a spindle speed range up to 3600 rpm and includes a 12-station turret with 6 driven tool stations. Ideal for precise horizontal turning, it supports a maximum turning diameter of 520 mm. Contact us for more information about this machine. Codpoxirlnofx Abcsrh Application Types Turning

Condition: excellent (used), Year of construction: 2012, operating hours: 3,355 h, functionality: fully functional, turning length: 450 mm, turning diameter: 200 mm, spindle speed (max.): 5,000 rpm, spindle bore: 51 mm, travel distance X-axis: 160 mm, travel distance Z-axis: 450 mm, overall weight: 3,800 kg, For sale is a CNC lathe from the brand Gildemeister, model CTX 310 Eco. The machine is in excellent condition and ready for immediate use. Technical specifications: Year of manufacture: 2012 Operating hours: 3,355 h (see picture) Control: SIEMENS SINUMERIK 810D Powerline Max. turning diameter: 200 mm Max. swing diameter over bed: 330 mm Max. turning length: 450 mm X-axis travel: 160 mm Main spindle speed: 5,000 rpm Spindle bore: 51 mm Turret: 12-station turret (VDI 30) Live tooling: 6 driven tool stations Live tool speed: approx. 4,500 rpm Crodpfx Aexf T N Tsbcsh Rapid traverse X/Z: 30/30 m/min Dimensions: approx. 4200 mm x 1700 mm x 2300 mm Machine weight: approx. 3,800 kg Chip conveyor included in the offer. Tool holders not included in the offer (can be offered additionally). Transport and loading can be organized across Europe upon request, at extra cost. Prices are exclusive of VAT. Inspection by appointment possible. Contact us — our team is happy to assist you! Trade-in or exchange possible! Machinery trading PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MORE. Are you looking for a high-quality yet affordable metalworking machine for your production? Or do you wish to sell yours? For more information or contact options, please visit our website.

Condition: good (used), Year of construction: 1985, Ref. -No.: 10595 Manufacturer: GILDEMEISTER MAX MüLLER Type: MD 6S Year of construction: 1985 Type of control: CNC Control: EPL 4 Storage location: Halberstadt Country of origin: Germany Tool holder type: 2 x VDI 50 Centre Distance: 1765 mm Spindle passage: 101 mm Swing diameter over bed: 720 mm Swing diameter over cross slide: 490 mm Lathe chuck diameter, max.: 400 mm Power Capacity: 50 kW Weight Of The Machine Ca.: 16 t Turning Speed Range: 10 - 2800 rpm Quill holder: MK 5 Further information: - Equipment - Powered tools - Tailstock - Automatic quill stroke Cedpfx Absxc Tuwecjrh - Chip conveyor - Automatic sliding safety doors - Hydraulic steady rest - 2 turrets

Condition: excellent (used), Year of construction: 2002, Machine in perfect condition. Credpfx Abergpv Tecsh Can be inspected during production any time

Year of construction: 2006, condition: ready for operation (used), Control Unit Brand SIEMENS Model 840 D Main Drive Spindle speed range 7000 rpm Number of axis 7 Additional Equipment Double spindle version Y-axis Main and counter spindle Collet chuck 1 attached tool axial 1 attached tool radial Belt filter system Loading magazine FMB Turbo 10-72 XT This 7-axis Gildemeister Twin 41 horizontal turning machine was manufactured in 2006. Ideal for precision and complex turning operations, it offers robust performance and reliability. Consider the opportunity to buy this Gildemeister Twin 41 horizontal turning machine. Contact us for more information. Application Types Turning Cedpfoxg Un Hsx Abcerh

Year of construction: 2008, condition: ready for operation (used), Control Unit Brand HEIDENHAIN Model na Main Drive Crodpfsxd H T Njx Abceh Number of axis 3 This 3-axis Gildemeister CTX 420 Linear was manufactured in 2008. It features a HEIDENHAIN iT CNC control, motorized tools, and both C and Y axes, enhancing its horizontal turning capabilities. Consider the opportunity to buy this Gildemeister CTX 420 Linear horizontal turning machine. Contact us for more information. Application Types Turning