Used Gildemeister Nef 720 for sale (242)

Condition: used, Year of construction: 1991, turning diameter 42 mm turning length 250 mm control total power requirement kW Crsdpfxot Hwz As Abcsh weight of the machine ca. t dimensions of the machine ca. m CNC-lathe with bar feed with Sameca bar feed

Condition: used, Year of construction: 2003, functionality: fully functional, machine/vehicle number: 06800001511, Used: CNC vertical lathe Manufacturer: DMG/ GILDEMEISTER Model: CTV250 Cedewzk D Ajpfx Abcorh Year of manufacture: 2003 Serial number: 06800001511

Condition: good (used), Year of construction: 1999, operating hours: 1,40,810 h, functionality: fully functional, Gildemeister MF SPRINT 65 Machine No.: 07810000801 Control: SINUMERIK 840 C Year of manufacture: 1999 Operating hours: 140,810 Irco ILS short bar feeder Annual maintenance by DMG, last service on 08.07.2024: - Linear guides, axial bearings, ballscrews and locking nuts renewed on X1 axis - Linear guides, axial bearings, ballscrews and locking nuts renewed on Z1 axis - Linear guides, axial bearings, ballscrews and locking nuts renewed on X2 axis - Linear guides, axial bearings, ballscrews and locking nuts renewed on Z2 axis - All telescopic cover wipers replaced - Safety glass in work area door replaced - All feed timing belts as well as the counter spindle drive timing belt replaced - Tool drive 1 dismantled, disassembled, cleaned, and newly fitted with bearings - Main spindle fan filter mat replaced, coolant valves of turret 1 and 2 replaced - Main spindle and counter spindle chucks dismantled and cleaned - Machine geometry and work area remeasured and adjusted - Hydraulic filter cartridges replaced, pneumatic filter replaced - Technical data see attachment Machine can be inspected under power. Price: €25,000 negotiable The offer is subject to confirmation and non-binding. Changes and errors in technical data or specifications as well as prior sale reserved. Used machines are sold as seen, without any warranty claims. Codpfx Aeu Dg Ubsbcsrh Delivery ex works, packaging and insurance exclusively unless otherwise agreed. Price is net plus legally applicable VAT. Payment to be made, as is customary for used machines, prior to loading.

Condition: not inspected (used), Year of construction: 2009, operating hours: 24,854 h, functionality: unexamined, machine/vehicle number: 00410002771, turning diameter over cross slide: 380 mm, turning diameter: 410 mm, spindle speed (max.): 4,000 rpm, travel distance X-axis: 300 mm, travel distance Z-axis: 850 mm, Equipment: documentation/manual, No minimum price – guaranteed sale to the highest bidder! Placing a bid obligates you to collect the machine within the period from 28.07.2025 to 31.07.2025. Including a comprehensive tool package TECHNICAL DETAILS Swing diameter over bed: 700 mm Max. swing diameter over cross slide: 380 mm Max. turning diameter: 410 mm Centre distance: 975 mm Turning length: 800 mm X-axis travel: 300 mm Cjdpfx Aowvhunjbcsrh Z1-axis travel: 850 mm Z3-axis travel: 800 mm Max. spindle speed: 4,000 rpm Main spindle: ISM 102 C-axis torque: 600/770 Nm Spindle flange height from floor: 1,040 mm Spindle flange diameter: 220h5 mm Chuck diameter: 315 mm Bar diameter: 102 mm Spindle bore diameter: 118 mm Front bearing diameter: 160 mm C-axis angular resolution: 0.001° Turret with driven tools Tool holders: VDI 40 Number of tools: 12 pcs. Tailstock: travel 800 mm, Morse taper 5 MT MACHINE DETAILS Serial number: 00410002771 Operating hours: 71,843 h Spindle hours: 24,854 h Dimensions: 5,000 x 2,800 x 2,000 mm Weight: 7,500 kg EQUIPMENT - With technical documentation

Condition: used, Year of construction: 2002, Technical details: turning diameter: 250 mm turning length: 900 total mm turning length: 300 mm control: Sinumerik 840 D bar material dia.: 65 mm chuck diameter: 250 mm turning diameter: 100 mm turning speeds: 2x 25-8.000 1/min positive location each: 2xC-Achse, 0,001° Grad Sub spindle: ja/yes turret (x-stations): 2x 12-fach VDI 25 driven tools: 2x 12 turning speeds: 5000 1/min total power requirement: 50 kVA weight of the machine ca.: 10 t dimensions of the machine ca.: 4,8 x 2,2 x 2 m Machine will be sold without bar feeder magazine. * Codpfewlfytjx Abcerh

Condition: used, Year of construction: 2009, turning diameter 465 mm turning length 1050 mm centre height 300 mm control SIEMENS SINUMERIK 810D spindle bore 76 mm turning speed range 3250 U/min total power requirement 50 kW weight of the machine ca. 7800 kg dimensions of the machine ca. 5300 x 2200 x 1700 mm Cjdpfxowxyz Ee Abcerh CNC lathe - cycle controlled

Condition: excellent (used), Year of construction: 2008, operating hours: 35,598 h, functionality: fully functional, machine/vehicle number: 07400004031, spindle motor power: 20 W, spindle speed (min.): 3,250 rpm, spindle speed (max.): 5,000 rpm, bar passage: 90 mm, overall weight: 10,000 kg, bar capacity 90 mm - 2x12 position driven turrets - Y axis in upper turret - tail stock - Siemens 840D power line Control - machine in perfect condition that has always worked with oli - very very well tooled - Lns Sprint S2 barfeed. Cedeuyx Hzopfx Abcsrh

Year of construction: 2002, condition: ready for operation (used), Main Drive Spindle speed range 4500 Spindle motor power 46 kVA Credpfewr Nzhex Abcsh Number of axis 3 Movement X-Axis Movement 260 mm Y-Axis Movement 40 mm Z-Axis Movement 635 mm Media Power consumption 11 kVA This 3-axis Gildemeister CTX 420 linear was manufactured in 2002. It features a max. travel in X-axis of 260 mm, Z-axis of 635 mm, and Y-axis of 40 mm. It handles a max. workpiece diameter of 680 mm and length of 760 mm. Spindle speeds reach up to 4,500 rpm. If you are looking to get high-quality turning capabilities, consider the Gildemeister CTX 420 linear machine we have for tact us for more information. Application Types Turning

Condition: excellent (used), Year of construction: 2011, CNC twin-spindle turning center Control: CNC path control including 19" TFT Siemens Sinumerik 840 D sl solution line with ERGOline control and with ShopTurn 3 G TECHNICAL DATA Max. turning diameter 340 mm Spindle distance 1470 mm Turning length 1135 mm Swing over bed 700 mm Swing to tool carrier 2540 mm Travel paths: X1 – Tool carrier I 270 mm Y1 – Tool carrier I 120 mm Z1 – Tool carrier I 1200 mm X2 – Tool carrier II 195 mm Y2 – Tool carrier II 80 mm Z2 – Tool carrier II 1200 mm X3 – Counter spindle slide 180 mm Z3 – Counter spindle slide 1200 mm Main spindle Integrated spindle motor ISM 102 Drive power (100/40% duty cycle) 40/48 kW Torque (100/40% duty cycle) 570/680 Nm Speed range 0-4000 rpm Bar diameter 102 mm Draw tube inner diameter 104 mm C-axis and spindle brake (angular resolution) 0.001° Counter spindle Integrated spindle motor ISM 76 Drive power (100/40% duty cycle) 25/32 kW Torque (100/40% duty cycle) 280/380 Nm Speed range 0-5000 rpm Bar diameter 65/75 mm C-axis (angular resolution) 0.001° Slide 1 Tool carrier (direct drive) Number of tools 12 Tool holder diameter VDI (DIN 69880) 40 mm Maximum power (100/40% duty cycle) 10.9/14.2 kW Maximum torque (100/40% duty cycle) 26/34 Nm Speed range 40 – 10,000 rpm Slide 2 Tool carrier (direct drive) Number of tools 12 Tool holder diameter VDI (DIN 69880) 40 mm Maximum power (100/40% duty cycle) 10.9/14.2 kW Maximum torque (100/40% duty cycle) 26/34 Nm Speed range 40 – 10,000 rpm Slide 3 Rapid traverse speed X/Z axis 30/45 m/min Tool resolution Z axis 0.001° Feed force (40% duty cycle) X/Z axis 16/13 kN EQUIPMENT/ACCESSORIES  IRCO ILS-RBK 100/16 short-bar loader  Various main spindle reducers  NC-controlled workpiece retrieval device from both the main and counter spindles The device consists of an NC-controlled *Horizontal axis *Swivel unit *Vertical axis *2-jaw gripper for interchangeable gripper jaws  Conveyor belt for removing workpieces from the machine Crjdpfx Abowcd S Nocsh  8/20 bar coolant system with immersion cooler  Chip conveyor  Oil mist extraction  Control cabinet cooling unit (up to 40°)  Counter spindle slide  Easy-Tool monitor  1 collet chuck for quick-change clamping head size 100 for the main spindle  1 collet chuck for quick-change clamping head size 100, Nova Achsfix for the counter spindle  Approx. 40 various quick-change clamping heads size 100 (complete inventory)  Pneumatic tool changer, ø 100 mm  Approx. 50 various tool holders, fixed and driven (complete inventory)  Mounting elements  Documentation

Condition: good (used), Year of construction: 2013, functionality: fully functional, Gildemeister SPRINT 65 Linear IRCO Breuning bar feeder Chip conveyor High-pressure unit with integrated paper belt filter system and cooling unit Fanuc 310 control Operating hours: approx. 61,550 Production hours: approx. 46,400 Credpfxowwa U Aj Abceh The machine can be inspected under power Immediately available

Condition: good (used), Year of construction: 2010, functionality: fully functional, CNC lathe GILDEMEISTER DMG MSL 60/7 Year of manufacture: 2010 CNC control: SIEMENS 840 D Powerline Technical Details Spindle bore: 65 mm Max. spindle speed: 5,000 rpm Bar capacity: 60 mm C-axis: available Sub-spindle: 5,000 rpm Cjdpewu T Dfefx Abcsrh Total weight: 3,500 kg EQUIPMENT - Bar feeder type IEMCA Master 880/33 HF - KSS coolant unit - Hinge belt chip conveyor

Condition: used, Year of construction: 1998, operating hours: 97,593 h, functionality: fully functional, turning diameter: 65 mm, spindle bore: 79 mm, spindle speed (max.): 4,500 rpm, spindle speed (min.): 25 rpm, For Sale: Gildemeister MF Sprint 65 CNC Sliding Headstock Lathe with 3-Meter Bar Feeder, as shown in the pictures. The machine was removed from our workshop in fully functional condition. A video of the machine in operation prior to disassembly is available upon request. Approximately five years ago, the linear guides of the X1 and Z1 slides (on the main spindle side) were replaced, including bearings and belts. A new HMI interface was installed recently. Detailed specifications and technical data can be found in the attached PDF. TECHNICAL DATA Control: Sinumerik 840C Bar Feeder: SIMAG 65.1-3200G, Year of Manufacture: 1998 Bar Length: 3 meters Bar Diameter / Spindle Bore: 65 mm Main Drive Power Output: 28 / 21 kW Speed Range: 25 – 4,500 rpm Torque: 320 / 240 Nm Maximum Feed Rate for Thread Cutting: 10 m/min C-Axis Speed: 120 rpm C-Axis Torque (Holding Torque): 180 Nm Tool Carrier Number of Tool Stations: 8 Shank Diameter (DIN 69880): 30 mm Number of Driven Tool Stations: 4 Power Output: 7.6 / 4.6 kW Torque: 24 / 14.7 Nm Maximum Speed of Tool Carrier 1: 4,000 rpm Maximum Speed of Tool Carrier 2: 4,000 rpm Slide 1 Cross Travel / Longitudinal Travel: 155 / 280 mm Rapid Traverse Speed X/Z: 22.5 / 22.5 m/min Feed Force X/Z: 900 / 900 daN Slide 2 Cross Travel / Longitudinal Travel: 82 / 120 mm Rapid Traverse Speed X/Z: 22.5 / 22.5 m/min Feed Force X/Z: 900 / 900 daN MACHINE DATA Dimensions with Bar Feeder and Chip Conveyor (L × W × H): approx. 6 × 2 × 2 meters Weight: approx. 6.5 tons Operating Voltage: 50 Hz, 400 V Csdpfowym Nfex Abcerh Accessories: Cooling System Chip Conveyor Documentation The offer is subject to change and non-binding, changes and errors in the technical data or the equipment, as well as prior sale reserved Used machines are purchased as seen, without warranty claims. Delivery ex works excluding packaging and insurance, unless otherwise agreed. The price does not include statutory value added tax. As is usual with used machines, payment is made before loading.

Condition: used, Year of construction: 1997, operating hours: 48,794 h, functionality: unexamined, machine/vehicle number: 313280, turning length: 635 mm, turning diameter: 220 mm, spindle motor power: 21 W, overall weight: 5,300 kg, 12-position turret (6 are driven) - tailstock - well equipped - Heidenhain control Crsdpfx Absw H N Htocjh

Condition: ready for operation (used), Year of construction: 2005, 1 unit of used CNC lathe with driven tools and Y-axis. Siemens control. Cjdpfewz Sgfox Abcerh

Condition: good (used), Center height 260 mm Trestle holder MK 4 Quill stroke 100 mm This hydraulic tailstock comes from a GILDEMEISTER CT 40 CNC slant-bed lathe. Fig. similar Siegfried Volz Machine Tools Crjdporalkmefx Abcjh Rüschebrinkstr. 151-153 DE - 44143 Dortmund-Wambel

Condition: used, Year of construction: 1991, CNC lathe multi-spindle Gildemeister GDS 65/4A Crodpfx Asvx Nu Nsbceh -reconditioned control -5-axis machine -Year of manufacture: 1991 -2 tool turrets with 12 tool positions each -rear machining -part removal flap -chip conveyor -bar loader (10 bars)

Condition: good (used), Year of construction: 2000, Gildemeister CTX 400, year of manufacture 2000, Heidenhain control, turning length 640 mm, turning diameter 470 mm, 12-position turret without driven tools, VDI 30 mounting, tailstock, chip conveyor, Schunk three-jaw chuck Ø 230 mm. Codpfx Ajw E H I Eebcsrh

Condition: excellent (used), Year of construction: 2005, operating hours: 23,500 h, chuck outer diameter: 250 mm, turning diameter: 320 mm, rotational speed (max.): 4,000 rpm, swing diameter 320 mm control 840 D SIEMENS turning speeds 5000 1/min spindle drive 20 / 27 kW chucking diameter 250 mm travel -x axis 650 mm travel -z axis 300 mm turret head 12 Pos. tool holder VDI 40 toolpiece turning speed range 4000 1/min Cjdpfewhd Sgex Abcerh work piece power max. 11,7 kW CNC vertical lathe, live tools, C-axis, high pressure pump 20 bar, 500l, filter, flush gun, 3-jaw chuc, EWAB loading station right, chipconveyor, approx. 23.500h "machine on", approx. 8.000h "spindle on"

Condition: ready for operation (used), functionality: fully functional, travel distance X-axis: 800 mm, travel distance Z-axis: 300 mm, TECHNICAL DETAILS Chuck diameter: 250 mm Crsdpfswrr T Tox Abcjh X-axis: 800 mm Z-axis: 300 mm Spindle Spindle head: 170 h5 Spindle diameter at front bearing: 120 mm Spindle bore: 79 mm C-Axis Number of tool stations: 12

Condition: used, Year of construction: 2004, operating hours: 11,022 h, functionality: fully functional, machine/vehicle number: 07520000211, turning length: 1,070 mm, turning diameter over cross slide: 400 mm, turning diameter: 560 mm, spindle motor power: 37 W, spindle speed (max.): 4,000 rpm, spindle bore: 79 mm, travel distance X-axis: 485 mm, travel distance Y-axis: 160 mm, rotational speed (max.): 12,000 rpm, Equipment: rotational speed infinitely variable, Gildemeister GMX 200 Linear with tailstock and steady rest for sale. Included are a coolant treatment system and a quality selection of tools HSK 63 - A, approximately 40 tools. Also included is a Berg chuck, see photos. The machine is being sold due to lack of orders. 49,700 power-on hours, 11,022 spindle hours. The machine can be inspected and tested at any time. Loading is possible without any issues. Credpfeug Uc Njx Abcsh

Condition: good (used), Year of construction: 2007, operating hours: 27,896 h, functionality: fully functional, machine/vehicle number: 2101-0171, turning diameter: 20 mm, rotational speed (max.): 10,000 rpm, torque: 14 Nm, TECHNICAL DATA Max. turning diameter: 20 mm Tool body diameter: 20 mm Spindle positioning resolution: 0.1° Main spindle Rated power: 3.7 kW Power: 5.5 kW Torque: 14 Nm Rated torque: 9.4 Nm Speed: 10,000 rpm Axis data Linear axis Z1 / X1 / Z1 – travel: 80 / 35 / 240 mm Linear axis Z1 / X1 / Z1 – feed rate (max.): 40 m/min Linear axis Z1 / X1 / Z1 – acceleration (max.): 10 m/s² Linear axis Z1 / X1 / Z1 – nominal force: 1,250 N Linear axis Z2 / X2 – travel: 180 / 230 mm Linear axis Z2 / X2 – feed rate (max.): 40 m/min Linear axis Z2 / X2 – acceleration (max.): 10 m/s² Linear axis Z2 / X2 – nominal force: 1,250 N Tool holder Csdsw Em Dmspfx Abcsrh Number of fixed tools (internal): 6 Diameter: 20 mm Number of fixed tools (external): 4 Tool shank size: 12 × 12 mm Number of driven tools: 4 Collet type: ESX 16 MACHINE DETAILS CNC control: Fanuc 16iT Machine dimensions (L × W × H): 2,275 × 1,300 × 1,760 mm Weight: 2,600 kg Connected load: 21 kVA Power-on time: 85,620 h Operating hours: 27,896 h EQUIPMENT - CNC control: Fanuc 16iT - Bar feeder FMB Turbo 3-36 / 4200 / A, year of manufacture 2007 - Coolant tank with chip conveyor - Centralized lubrication - Handheld control device - Documentation available

Year of construction: 2004, operating hours: 25,218 h, condition: ready for operation (used), Control Unit Brand HEIDENHAIN Crodpfx Abswpydujcsh Model CNC Pilot 4290 Main Drive Number of axis 3 Additional Equipment Chip conveyor included Forkardt lathe chuck Ø400 with several sets of jaws (approx. 100 sets) This 3-axis Gildemeister CTX 520 linear was manufactured in 2004. It's a horizontal turning machine designed for precision and efficiency in metalworking. If you are looking to get high-quality turning capabilities, consider the Gildemeister CTX 520 linear machine we have for sale. Contact us for more information. Application Types Turning

Condition: defective spare-parts repository (used), Year of construction: 2000, Gildemeister CTX 400, year of manufacture 2000, Heidenhain control, X/Z travel 220 / 635 mm, 12-position turret / 6 driven stations, VDI 30 tool holder, C axis, tailstock, chip conveyor, machine not running, probably 2 amplifiers defective. Crjdpfx Absw Eaw Hscsh

Condition: excellent (used), Year of construction: 1999, functionality: fully functional, Manufacturer: Gildemeister Max Müller Model: MD 7 iT / 4A Year of manufacture: 1999 Control: EPL 4 Swing diameter over bed: 720 mm Swing diameter over cross slide: 490 mm Centre distance: 1,765 mm Chuck diameter: 400 mm Spindle bore: 101 mm Drive power: 50 kW Speed range: 10 – 2,800 rpm Equipment Driven tools: yes Tool turret: 2 x VDI 50 Tailstock: yes Automatic quill stroke: yes Credpjw Dbh Rsfx Abcoh Quill taper: MK 5 Chip conveyor: yes Weight: approx. 16,000 kg C-axis Y-axis: +65 mm, -65 mm Automatic sliding safety doors Hydraulic steady rest 2 turrets A lot of accessories included. Subject to errors and prior sale.

Condition: ready for operation (used), Gildemeister 851.75.00-03.26 card (570 127/137), used, normal signs of use, 100% functional Crodpfji D U S Rjx Abcsh