Used Glue Spreader for sale (1,489)

Condition: excellent (used), Year of construction: 2013, Brandt Highflex KDF 220 edge banding machine with joining, corner copying, and two trimming blades. Very highly automated. A video of the machine in operation can be sent upon request. Edge thickness: approx. 0.4 - 3 mm, solid edge up to 6 mm Workpiece height: approx. 10 - 60 mm Feed rate: approx. 10 m/min Noise protection hood Retractable workpiece support Dust extraction connection: 1x120mm, 1x100mm, 3x80mm Easy-Touch EC+ control panel for easy machine operation 4 programs can be saved. Machine in Highflex version, highly automated, switching between thin and thick edges via programs. Units: Extended infeed zone Bjdpfjzzqwmsx Agxjww Chain track central lubrication, pneumatically manual Glue pot quick-change device, currently one glue pot available Top pressure: manual adjustment, PU rollers Infeed guide: manual adjustment with SIKO counter for chip removal Joining cutter with diamond cutters, sharpened Contact heating plate for preheating the panel Gluing section with automatic edge infeed for roll material up to 3 mm, switchable for direct and reverse operation Pressure zone with 3 rollers, pneumatic adjustment between thin and thick edges Cut-off saw with 2 motors, straight or bevel cuts (program-controlled) Combination routing unit, pneumatically controlled for flush trimming, chamfering, and radius Corner rounding cutter R2 with diamond cutter with integrated sensing ring Radius trimming blade R2, pneumatically retractable with quick-change device Glue seam trimming blade with large roller, pneumatically controlled Hood locking CE marking All indexable inserts of the routing units and trimming blades have been replaced or resharpened, saws have been sharpened, and diamond joining cutters have been sharpened. The machine is therefore ready for immediate use. Only the diamond cutter of the shaping cutter has not been replaced, but it is still sharp. Original paint, only a few spots have been touched up. Unfortunately, the machine does not have an operating hour counter, but it still looks very good. Very good condition, see original photos. Machine dimensions: approx. 4550 x 1250 x 1550 mm (LxWxH) Weight: approx. 1400 kg. The machine can be demonstrated on site after prior arrangement. We only offer machines that are ready for demonstration and are in our warehouse, see "other offers from this supplier".

Condition: excellent (used), functionality: fully functional, Year of construction: 2010, operating hours: 7,204 h, load capacity: 4,000 kg, lifting height: 4,600 mm, load center: 600 mm, fuel type: diesel, mast type: duplex, construction height: 3,000 mm, motor manufacturer: G.M., gearing type: hydrostat, fork carriage width: 1,360 mm, fork length: 1,200 mm, fork width: 150 mm, fork thickness: 50 mm, tire condition: 100 %, front tire type: cushion tires (black), front tire size: 200/50-10, rear tire type: cushion tires (black), rear tire size: 27X10-12, overall weight: 6,100 kg, empty load weight: 10,100 kg, total height: 2,400 mm, total length: 2,400 mm, total width: 2,250 mm, color: yellow, Equipment: CE marking, all wheel drive, cabin, lighting, pallet forks, sideshift, 🔥 COMBILIFT C4000 | 2010 | 7,204 MTH | LPG | Duplex 4,600 mm | Fork Positioner | Condition 5/5 ✅ Fully serviced and inspected 🔧 | New superelastic tyres 🛞 | Optional 4,050 mm spreader bar 🏗 FT LOGISTICS – Quality you can trust 🤝 This COMBILIFT C4000 is ready for immediate work — reliable, powerful and designed for demanding operations. After full technical and visual service, it looks like new ✨ and works without compromise. ⚙️ Specifications: 📅 Year: 2010 ⏱ Hours: 7,204 MTH 🔥 Fuel: LPG 🏋️ Capacity: 4,000 kg 📏 Mast: Duplex 4,600 mm 🔧 Fork positioner 1,360 mm | Forks 1,200 mm 🛞 Tyres: 100% superelastic (Front 200/50-10 | Rear 27x10-12) 🏠 Heated full cab Bedpfj Ahwm Ajx Agxoww ⚖️ Weight: 6,100 kg | 🎯 Load centre: 600 mm 📐 Dimensions: 2400 x 2400 x 2250 mm | Overall height: 3000 mm ✅ Ideal for narrow aisles, long loads, steel, timber, tubes — indoor and outdoor use 🏭🌍 FT LOGISTICS – Quality we stand behind. Service you can rely on. 🛠️

Condition: good (used), Year of construction: 2014, operating hours: 11,578 h, load capacity: 8,000 kg, lifting height: 4,450 mm, fuel type: gas, mast type: duplex, construction height: 3,580 mm, empty load weight: 15,290 kg, mileage: 11,578 km, - LPG forklift - Brand: Linde (Germany) - Year of manufacture: 2014 - Capacity: 8,000 kg Bjdjynt Naepfx Agxoww - Lifting height: 4,450 mm - Mast height (fully raised): 3,580 mm - Side shift fork spreader - DUO PALLET system - Four functions - Watch the video on YouTube

Condition: good (used), Year of construction: 2013, operating hours: 15,916 h, load capacity: 2,500 kg, lifting height: 4,000 mm, fuel type: electric, mast type: duplex, construction height: 2,900 mm, mileage: 15,916 km, - Electric double forklift - Year of manufacture: 2013 - Brand: Toyota - Capacity: 2,500 kg - Lifting height: 4,000 mm - Mast height: 2,900 mm - Equipped with side shift and fork spreader - Battery tested for 1.5 hours! Bjdpfxjyzpyvj Agxjww - Automatic filling system - Equipped with an external charger

Condition: good (used), Year of construction: 2016, operating hours: 8,410 h, load capacity: 3,000 kg, lifting height: 4,500 mm, fuel type: electric, mast type: duplex, construction height: 2,920 mm, empty load weight: 5,000 kg, mileage: 8,410 km, - Electric double-mast forklift - Brand: Jungheinrich (Germany) Bedpfjy R Aq Tex Agxsww - Year of manufacture: 2016 - 8,410 hours - Capacity: 3,000 kg - Lifting height: 4,500 mm - Mast lowered height: 2,920 mm - Equipped with a FORK SPREADER - SIDE SHIFT - Battery: 2016 - With external charger - Automatic filling system Watch the video on YouTube.

Condition: new, The model ME 40TR is SCM’s ‘bestseller and in this category offering unrivaled price / performance ratio. We can offer the following new machine SCM me 40tr, CE Volt 400 EU, frequency 50 Hz edge thickness coils 0,4 - 3 mm max. edge thickness strips 5 mm min. – max. work piece thickness 8 - 50 mm feed speed 9 m/ min glue pot unit 0,18 kW, capacity 0,8 kg Bedpsc S Di Rofx Agxoww premiling aggregate 2,2 kW, 9000 U/ min end-cutting unit with "Radius" allows you to make a radius on the corners of the edged panel trimming unit 2 x 0,35 kW, 12.000 U/ min OPTIONAL device for panel preheating edge scraping unit flat scraping unit grooving unit 1,1 kW, 12.000 U/ min, notch width 4 mm brushing unit with 2 independent motors magazine for strip edges kid for quick exchange of glue unit ...

Condition: excellent (used), Year of construction: 2002, edge seize 0,2 - 12 mm work piece dimension width min. 70 mm height min. / max. 8 / 42 mm length min 160 mm (strips) length min 60 mm from roll Durchlaufgeschwindigkeit: 12 m/ min glue coating with roller working height : 880 mm compressed air 6 bar,1/4 Zoll suction connection, DM 160 mm dimensions: L x W x H = 5600 x 950 x 1300 mm weight: ca. 2200 kg total conection: ca. 11,5 kW, 400 V, 50 Hz machine equipped with: - double top roll pressure with electric height adjustment - autom. roll magazine for rolls up to 800 mm DM, pneumatic cutting up to 3 mm - autom. infeed fence - no adjustment of edge seize premilling aggregate with 2 HF-motors 1,5 kW, 12000 n double end trim unit - 2 HF-motors 0,2 kW, 12.000 n Bwjdpfohy Tlrex Agxsw 2 autom. positions = 0 + 3 deg. flush trimming aggregate with 2 HF-motors 0,7 kW, 12.000 n radius trimming unit - with2 HF-motors 0, 3 kW, 12.000 n, radius scraping unit, autom. set in flat scraping unit Advise used machines: • Technical data without obligation, mistake and intermediate sale reserve. • Price is considered ex-location price • All articles or machines are bought as seen without any entitlement on warranty. • It is left to the choice of the buyer to view the machines before at its location. • Special arrangements are possible but only valid in written form. (We answer your inquiries only with stated address + telephone number!)

Condition: used, Year of construction: 2008, machine/vehicle number: 654/08, functionality: fully functional, Used automatic edge bander with pre-milling unit. Robust machine designed especially for solid wood edges and lippings. - Control via LCD touch panel - Heavy-duty chain feed conveyor - Automatic thin edge feeding from magazine - Solid edge magazine Bjdpou T Nhmefx Agxjww - Pre-milling of panels using 2 cutter heads (with insert knives) - Glue preheating in a separate tank - Reinforced pressure zone with 5 pressure rollers - End trimming with 2 saw blades - Top and bottom trimming Technical data: - Min./Max. edge height: 14 / 104 mm - Min. edge thickness: 0.4 mm - Min./Max. panel thickness: 10 / 100 mm - Feed speed: 12 m/min - Min. working length/width: 200 / 85 mm - Milling tool speed: 12,000 rpm - Dimensions: 5250 x 1100 x 1650 mm - Weight: 2000 kg The machine has been used and tested. It is operational but requires maintenance, cleaning, adjustment, and sharpening of the tools. Sold in its current condition.

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, Specification: Bwedo Afxulepfx Agxew Feed Speed 814m/min Workpiece Thickness: 8-60mm Edge Material Coil: 0.4-3mm Edge Material Strip: 0.4-8mm Joint Trimming 2x2.2kw Workpiece Pre heating EVA Gluepot Airtec Unit AT15 Edge Magazine Pneumatically Driven pressure Roller End Trim Unit Chamfer/Straight Top & Bottom Trimming Unit with Pneumatic Adjustment Contour Trimming Unit Profile Scraping Unit with Quick Change Heads Glue Joint Scrapers Buffers CE

Condition: ready for operation (used), Compact Dovetail Machine Output: approx. 4–6 joints/min. For wood tenon and mortise joints Thickness: 30–120 mm Width: 75–250 mm Pressing force: 22.5 t Automatic glue application via 2 glue combs, used for processing PUR glue. Spring-mounted with a safety shut-off system that immediately stops the milling and glue application feed in the event of even the slightest load. All parts are chrome-plated. Electrical system with Siemens S7 PLC, year 2015 Milling motor output: 22.00 kW Hydraulic unit: 29.50 kW Oil cooler: 0.75 kW Infeed feed: 1.50 kW Outfeed feed: 2.50 kW Cut-off saw: 3.00 kW Total power consumption: 59.25 kW = 120 amps In the past, jöma has successfully delivered and installed 10 of these machines. Bwjdpfx Agezmmr Rexow We can supply all spare parts for the compact dovetail machine. We, jöma, have been supplying and repairing Cook Bolinder machines for 30 years.

Condition: used, Edge sanding machines OTT S30 – 20 m/min Manufacturer: OTT Type: S30 Condition: Used Bedpfx Agez S Nukexsww Location: Rattelsdorf warehouse Machine description For sale is a used OTT S30 edge banding machine for professional edge processing in the wood and furniture industry. The machine features various processing units for efficient edge processing and is suitable for use in furniture production as well as in wood processing companies. Equipment and functions * Edge banding * Trimming * Flush trimming * Radius milling (R = 2 mm) * Scraping blade * Quick heating tank * Glue tank for granules * Feed rate: approx. 20 m/min Technical data * Machine length: approx. 4,500 mm * Year of manufacture: unknown * Machine condition: used

Condition: good (used), Eurotecnica 384 Perfect Binder 100% functional, ready to use. Manufactured by Eurotecnica, Italy. Capable of binding books, brochures, pads, prescriptions, etc. A very handy machine, ideal for digital printing. Technical specifications: Maximum format: 325 x 380 mm Spine thickness: 40 mm Cover weight: 300 gsm Production rate: approx. 200 books/h Weight: 150 kg 230V power supply Material detection sensors, adjustable gluer temperature, automatic cover clamp. Spine milling Easy to use Smooth adjustment of glue thickness Bwede Af E A Nopfx Agxow

Condition: used, Year of construction: 1999, functionality: fully functional, workpiece height (max.): 60 mm, edge thickness (max.): 15 mm, height adjustment type: electric, feed rate X-axis: 20 m/min, total length: 9,200 mm, total width: 1,600 mm, overall weight: 4,000 kg, Equipment: CE marking, For sale: OTT Euromatic edge banding machine Machine data: * Year of manufacture: 1999 Bedpfx Agjz S U S Isxsww * Machine length: 9,200 mm * Machine weight: approx. 4,000 kg * Maximum edge thickness: 60 × 15 mm * Edge thickness up to 20 mm also possible (by adjusting the flush trimming unit) * Minimum workpiece width: 60 mm * Minimum workpiece length: 160 mm Equipment: 1. NC-controlled infeed fence 2. Joining milling unit 3. Glue application 4. Pressure zone 5. Miter saw (swivels 15°) 6. Flush trimming unit 7. NC-controlled chamfer milling cutter (0–3 mm) 8. Rounding milling cutter R2 9. Corner copying unit R2 (postforming processing possible) 10. Rounding scraping blades 11. Surface scraping blade 12. Oscillating buffing unit 13. NC-controlled upper pressure bridge Notes: * The dust extraction system is not included in the sale. * The machine will be disassembled by us and delivered to the workshop door. * Loading can be arranged upon request (not included in the purchase price). * The removal of the machine must be organized by the buyer and will be at their own expense. * Sale due to the purchase of a new machine. * Available from the 1st week of December 2026. * The machine can be inspected and tested at any time by prior appointment.

Condition: used, functionality: fully functional, Year of construction: 2007, operating hours: 20,300 h, load capacity: 8,000 kg, lifting height: 12,500 mm, fuel type: diesel, mast type: duplex, construction height: 8,120 mm, power: 145 kW (197.14 HP), empty load weight: 30,900 kg, total length: 5,565 mm, drive type: Diesel, construction width: 3,380 mm, Empty container stacker Load center: 2540 Mast type: Duplex Transmission: ZF WG190 automatic Condition: Ready for operation and fully functional Technical condition: good Front tire type: Pneumatic Front tire size: 12.00-20 Front tire condition: 20 - 40% Rear tire type: Pneumatic Rear tire size: 12.00-20 Bwjdpfsz Rrayox Agxsw Rear tire condition: 80 - 100% 20-40ft side spreader, double stacking

Condition: used, functionality: fully functional, Year of construction: 2006, operating hours: 13,000 h, load capacity: 9,000 kg, lifting height: 16,000 mm, fuel type: diesel, mast type: triplex, construction height: 6,350 mm, power: 174 kW (236.57 HP), drive type: Diesel, Empty container forklift Load center: 1220 Mast type: Triplex Transmission: Clark/Dana 13.7HR 32335-630 Bwodpfez Rra Tjx Agxsw Condition: Ready for use and fully functional Technical condition: normal Front tire type: Pneumatic Front tire size: 14.00-24 Rear tire type: Pneumatic Rear tire size: 14.00-24 20ft-40ft sidelift spreader with twistlocks

Condition: used, functionality: fully functional, Year of construction: 2011, operating hours: 23,000 h, load capacity: 9,000 kg, lifting height: 15,500 mm, fuel type: diesel, mast type: duplex, construction height: 4,215 mm, power: 179 kW (243.37 HP), empty load weight: 44,200 kg, total length: 6,700 mm, drive type: Diesel, construction width: 4,150 mm, Empty container stacker Load center: 1220 Mast type: Duplex Transmission: ZF WG210 automatic, 4/3 gears Condition: Ready for use and fully functional Technical condition: normal Front tire type: Pneumatic Bwjdpfe Afq Evjx Agxow Front tire size: 14.00-24 Front tire condition: 20 - 40% Rear tire type: Pneumatic Rear tire size: 14.00-24 Rear tire condition: 40 - 60% Elme 594ND 20-40ft sidelift spreader, double stacking 6+1 HC high stacking

Condition: new, Year of construction: 2024, Drying and Burn-in Furnace TRO, Model I For drying racks with max. 50rods, useable size 60x90cm, outer dimensions: approx. 2290mm wide x 1390mm deep x 2230mm high, useable space: approx. 1400x1070x1660cm. Suitable for vaporisation of low amounts of solvent, authorised for inks and solvents up to hazard class A II, according to safety requirements DIN EN 1539. Equipped with control of the minimum exhaust volume and a heating system in regard to the exceedance of the max. temperature. Fixing and drying temperature: up to max. 180°C. Power connection: 400V/50Hz, 21kW, weight: approx. 650kg, varnishing: corps RAL 7035 (light grey), doors RAL 7037 (dust grey). Special varnishing upon request. Chamber dryer, all-steel construction, with good thermal insulation. Simple insertion of drying racks by means of easy-to-open wing doors. The air is sucked out of the drying chamber by ventilators, is blown through thermostat-controlled heating registers and re-fed temperature-controlled to the drying chamber. The solvents released during the drying process are dissipated from the exhaust side of the ventilator while supply air gets into the drying chamber. The horizontal air guide in the drying chamber guarantees an even temperature control. The required temperature can easile adjusted via actual and nominal value thermostat. Overheating protection by safety thermostat. Particularly suitable for fixing and drying of textile inks, flock glues as well as for burning-in of plate and aluminium signs up to 180°C. - Various drying racks for different applications available. - We recommend the installation of a gas warning unit. Delivery time 10-12 weeks. ATTENTION: Not permitted for solvents! Not permitted for foods! Bjdpfx Aod I T Exsgxeww

Condition: used, mileage: 4,800 km, power: 80 kW (108.77 HP), first registration: 11/2017, overall weight: 5,000 kg, color: white, gearing type: automatic, emission class: euro6, number of seats: 2, Equipment: ABS, air conditioning, all wheel drive, soot filter, Multicar M29 C.H.K 4x4 with winter package Vehicle can be re-registered to a maximum weight of 3.5 tons. 3.0 L, 80 kW / 109 hp turbo diesel engine, Euro 6, green 4,800 km, 645 operating hours * All-wheel drive with low-range gear * Automatic transmission * Air conditioning * Three-way tilting body with lashing eyes * Rear axle lock * Light bar with repeater lights and work lights * Foldable rotating beacon on the left and right * Hydraulic system * Swivel function, 2 front * Leakage line, front Bwsdpo Aaudfofx Agxew * Rear hydraulics * Control panel holder * Spiral fan * Gas inch function * Plug connection for front and mounted equipment * Snowplow function * Distance-dependent spreading * Radio with Bluetooth and hands-free system * LED work lights at the rear * Tires 285/65 R16C M&S * Inspection and service recently performed * Machine is in perfect, immediately operational condition. * TÜV/emission test newly passed * Includes winter package: Epoke spreader with stainless steel base, control panel and 4 parking devices * Fiedler snowplow * Leasing / hire purchase / trade-in possible. Various attachments in stock. Errors and prior sale excepted.

Condition: excellent (used), functionality: fully functional, Year of construction: 2012, operating hours: 4,046 h, load capacity: 3,000 kg, lifting height: 4,000 mm, free lift: 1,860 mm, load center: 600 mm, fuel type: diesel, mast type: duplex, construction height: 2,600 mm, motor manufacturer: G.M., gearing type: hydrostat, fork carriage width: 1,200 mm, fork length: 1,600 mm, fork width: 150 mm, fork thickness: 50 mm, tire condition: 100 %, front tire type: cushion tires (black), front tire size: 200/50-10, rear tire type: cushion tires (black), rear tire size: 23X10-12, overall weight: 8,250 kg, empty load weight: 5,250 kg, total height: 2,350 mm, total length: 2,800 mm, total width: 1,950 mm, color: yellow, Equipment: CE marking, all wheel drive, cabin, lighting, pallet forks, sideshift, COMBILIFT C3000 – 2012 – 4,046 hours – LPG – Duplex mast 4,000 mm – Fork Positioner – 1,500 mm Platforms | Fully serviced – New tyres – Optional 4,050 mm Spreader Beam – Condition 5/5 ✅ Bjdo Aa I D Eopfx Agxjww FT LOGISTICS – Used & New Forklifts with Guaranteed Quality 🚛✅ Ready for operation. No compromises. ⚙️ This COMBILIFT C3000 delivers reliable and efficient handling with minimum downtime. After comprehensive technical and cosmetic servicing, it’s presented like new and is ready for immediate use. 🔧✨ Main specifications 📌 • Year: 2012 | Operating hours: 4,046 • Capacity: 3,000 kg | Load centre: 600 mm • Mast: Duplex 4,000 mm • Fork positioner: 1,200 mm | Forks: 1,600 mm • Platforms: 1,500 mm | Spreader beam: 4,050 mm (option) • Tyres: Superelastic 100% (Front 200/50-10 | Rear 23x10-12) • Heated full cabin ❄️🔥 • Weight: 5,250 kg | Dimensions: 2,350H / 2,800L / 1,950W mm | Overall height: 2,600 mm Ideal for 🏭 narrow aisles, timber/steel/pipe handling, long loads, indoor and outdoor use. Why choose FT LOGISTICS? 🤝 Reliable machinery across Europe. Quality you can trust. ⭐

Condition: excellent (used), SINGLE SIDE EDGE BANDER (Left) Edges (band in rolls) thickness (Min/Max) mm 0,3 / 3 Edges thickness in strips / lippings (min/max) mm 0,4 / 22 (ca.) Panels thickness (min/max) mm 10 / 45 (60) Numerical Control Eye-M Feeding speed (adjustable) m/min 30 max (ca.) Top pressure system with rubber belt In-feed fence, adjustable by N.C. Pre-milling Unit (vertical joint trimmers) RT/H (2 x kW 4 ca.) Dual-Mode Glueing Unit (Hot Melt Glue + Quick Melt system) VC600 + QMS-P Band Pressure zone (N.C. adjustment) Edge coils supporting unit (reels N°) 1 Snipping (end-cutting) unit YU/SP (2 x kW 0,55 ca.) Rough Trimming unit R-E (2 x kW 1 ca.) Fine Trimming unit RSU/E (2 x kW 0,55 ca.) Multi-Profile? Corners Rounding (contour trimming) Unit C1 + C2 (4 x kW 0,35 ca.) with micro-adjustments? Profile edge scraping unit RCS (IN-OUT) Multi-Profile? Free space Glue scraping unit RCA (In-Out) Bedjz Nyp Hopfx Agxsww Hot Air Heater (to reactivate the color of plastic tape) PH 1600 Buffing unit (2 x kW 0,3 ca.) OPTION: Automatic Return System (fastBack)

Condition: excellent (used), functionality: fully functional, Year of construction: 2018, operating hours: 5,618 h, load capacity: 4,000 kg, lifting height: 4,600 mm, free lift: 2,250 mm, load center: 600 mm, fuel type: gas, mast type: duplex, construction height: 3,000 mm, motor manufacturer: G.M., gearing type: hydrostat, fork carriage width: 1,360 mm, fork length: 1,200 mm, fork width: 150 mm, fork thickness: 50 mm, tire condition: 100 %, front tire type: cushion tires (black), front tire size: 200/50-10, rear tire type: cushion tires (black), rear tire size: 27X10-12, overall weight: 10,100 kg, empty load weight: 6,100 kg, total height: 2,400 mm, total length: 2,300 mm, total width: 2,300 mm, color: yellow, Equipment: CE marking, all wheel drive, cabin, lighting, pallet forks, sideshift, COMBILIFT C4000 | 2018 | GAS | Duplex 4600 mm | Condition 5/5 Used and new forklifts with quality guarantee – FT LOGISTICS 🔧 Ready for operation. No compromises. The COMBILIFT C4000 is a robust multi-directional forklift designed for handling long and heavy loads in demanding industrial environments 🏭. After a complete technical and visual overhaul, and fitted with brand new superelastic tyres, the machine is in premium condition and available for immediate use 🚀. 🔍 Key Specifications: Year: 2018 | Operating hours: 5,618 hrs Drive: GAS (LPG) Load capacity: 4,000 kg | Load centre: 600 mm Bwodpfx Aoz Sckysgxsw Mast: Duplex with free lift Lifting height: 4,600 mm | Free lift: 2,250 mm Fork positioner: 1,360 mm | Forks: 1,200 mm Optional spreader beam: 4,050 mm 🔩 Weight: 6,100 kg 📐 Dimensions: L/W/H: 2,300 / 2,300 / 2,400 mm Overall height: 3,000 mm 🛞 Tyres (NEW – 100%): Superelastic Front: 200/50-10 | Rear: 27x10-12 ⚙️ Equipment & Condition: Fully enclosed heated cabin ❄️🔥 Duplex mast with free lift – ideal for low-clearance warehouses Refurbished, rust-free ✨ Technical condition: 5/5 🔧 🏭 Suitable for: Narrow aisle warehouses Timber, steel, and pipe industries Indoor and outdoor operation

Condition: used, mileage: 57,594 km, power: 110 kW (149.56 HP), first registration: 11/2018, fuel type: diesel, empty load weight: 3,070 kg, maximum load weight: 3,430 kg, overall weight: 6,500 kg, axle configuration: 4x4, wheelbase: 2,400 mm, brakes: other, color: orange, driver cabin: other, gearing type: mechanical, emission class: euro6, suspension: steel, number of seats: 2, loading space length: 2,000 mm, loading space width: 1,600 mm, loading space height: 400 mm, Equipment: ABS, additional headlights, air conditioning, all wheel drive, cabin, differential lock, onboard computer, soot filter, trailer coupling, * German vehicle * First owner * Documentation available * Only 2,054 operating hours * Original 57,594 km * 4x4 all-wheel drive * EURO 6 * 90 km/h approval * Condition: see photos * Three-sided tipper body * Loading area: Length 2,000 mm x Width 1,600 mm x Height 400 mm * Aluminum loading flaps * Steel floor with lashing eyes * Trailer coupling with electrical and hydraulic connections * Trailer load 3,500 kg * Municipal plate/work platform, hydraulically adjustable, with electrical and hydraulic connections * Joystick control * Winter service lighting * Snowplow, salt spreader, broom, and various attachments available at extra cost * Cab with 2 comfort seats, air-suspended * Air conditioning * Differential lock * Rotating beacon * Radio CD * Work lights * Wheelbase (mm) 2400 * Gross vehicle weight (GVW) 5,000 kg * Unladen weight 2,370 kg * Payload 2,630 kg * If sold to commercial businesses and for export (non-EU and EU), the German commercial law applies. If a new TÜV (technical inspection) is desired, we will gladly provide you with a quote from our partner workshops. Our offer generally does NOT include a new TÜV inspection, a new DGUV (German Social Accident Insurance) certificate, a new SP (safety report), or a new UVV (accident prevention regulations) certificate. You can find more trucks on our website at: We speak the following languages: German, English, Polish, Turkish Note: We strongly recommend and offer a viewing and inspection of the goods so that the buyer does not have any false impressions about the condition and suitability. Viewings and inspections are possible and expressly desired at any time by appointment. All information is without guarantee. We are not liable for errors and incorrect information in the offer. The buyer is obliged to independently verify the condition and equipment of the goods/vehicles. Bwjdpe Agpfdsfx Agxsw Subject to changes, prior sale, and errors.

Condition: used, mileage: 57,594 km, power: 110 kW (149.56 HP), first registration: 11/2018, fuel type: diesel, empty load weight: 3,070 kg, maximum load weight: 3,430 kg, overall weight: 6,500 kg, axle configuration: 4x4, wheelbase: 2,400 mm, brakes: other, color: orange, driver cabin: other, gearing type: mechanical, emission class: euro6, suspension: steel, number of seats: 2, loading space length: 2,000 mm, loading space width: 1,600 mm, loading space height: 400 mm, Equipment: ABS, additional headlights, air conditioning, all wheel drive, cabin, differential lock, onboard computer, soot filter, trailer coupling, * German vehicle * 1st owner Bedpfx Ags Agpfhexoww * Documentation available * Only 2,054 operating hours * Original 57,594 km * 4x4 all-wheel drive * 90 km/h approved * EURO 6 * Condition: see pictures * Three-way tipper body * Load area: Length 2,000 mm x Width 1,600 mm x Height 400 mm * Steel floor with lashing points * Aluminum tailgate * Municipal plate/work platform, hydraulically adjustable with electrical and hydraulic connections * Tow hitch with electrical and hydraulic connections * Towing capacity 3,500 kg * Winter service lighting * Snowplow, salt spreader, broom, and various attachments available at an extra cost * Cab with 2 comfortable, air-suspended seats * Air conditioning * Joystick control * Differential lock * Radio CD * Work lights * Rotating beacon * Wheelbase (mm) 2400 * Gross vehicle weight (GVW) 5,000 kg * Unladen weight 2,370 kg * Payload 2,630 kg * If sold to businesses and for export (non-EU and EU), the German commercial law applies. If a new TÜV inspection is desired, we will gladly provide you with a quote from our partner workshops. Our offer generally does not include a new TÜV inspection, a new DGUV, a new SP, or a new UVV. You can find more trucks on our website at: We speak the following languages: German, English, Polish, Turkish. Note: We strongly recommend and offer the opportunity to inspect and examine the goods, so that the buyer does not have any false impressions about the condition and suitability. Inspection and examination are possible and expressly desired at any time by appointment. All information is provided without guarantee. We are not liable for any errors or incorrect information in the offer. The buyer is obliged to independently verify the condition and equipment of the goods/vehicles. Subject to change, prior sale and errors.

Condition: used, mileage: 6,700 km, power: 55 kW (74.78 HP), first registration: 02/2018, overall weight: 3,500 kg, fuel type: diesel, color: orange, gearing type: mechanical, emission class: euro5, loading space width: 1,500 mm, loading space length: 2,000 mm, loading space height: 400 mm, number of seats: 2, Equipment: ABS, all wheel drive, soot filter, Multicar M27 Compact * 3500 kg * 2 L Turbo Diesel, 55 kW / 102 hp * 6700 km / 609 operating hours * Switchable all-wheel drive * Wheelbase: 2450 mm (short) * 5-speed manual transmission with reduction gear * 4-channel ABS, 4-wheel disc brakes (internally ventilated) * 3-circuit hydraulics * Swiveling front section Bwodpo Agqfvsfx Agxow * Rear hydraulics * Quick-change system for attachments SWV 500 * Lighting bar * Driver's suspension seat * Electrically adjustable and heated exterior mirrors * Electric windows * Ball-type trailer hitch * Tires 225/75 R16c M&S, new * Inspection service, new * New TÜV and emissions test * Workshop checked * 12-month used vehicle warranty through a warranty provider. Optional winter package: Various spreaders and snowplows, new and used, in stock. Leasing / financing / vehicle rental / trade-in / delivery to your location possible. You can find more vehicles of the Fuso Canter and Multicar brands, as well as various attachments, at: - Errors and prior sale excepted. - Our general terms and conditions apply.

Condition: used, Year of construction: 2020, functionality: fully functional, machine/vehicle number: 200066, input voltage: 220 V, overall weight: 244 kg, power: 0.5 kW (0.68 HP), input frequency: 50 Hz, We offer this used Omec ICA600 automatic gluing machine, year of construction 2020. year of construction: 2020 power: 0.5 kW machine type: ICA600 voltage: 220 V serial number: 200066 frequency: 50 Hz Bjdpfx Aj Afn D Asgxoww weight: 244 kg phases: 1+N If you have any questions or need more information, feel free to send us a message or give us a call.