Edge banding machine

OTT Pacific V12 F

Condition: used, Year of construction: 2009, Cutting length: 4200 mm Cutting width: 3200 mm Max. saw blade protrusion: with blade vertical at 0° = 70 mm with blade tilted at 45° = 50 mm Feed speed forward: 0-80 m/min. Feed speed reverse: 100 m/min. Weight: approx. 5400 kg. Motor power: 14 kW Scoring saw: 1.5 kW Tool: diameter: 350 mm bore: 30 mm Extraction port (bottom): 140 mm Extraction port (pressure beam): 100 mm Storage location: Supplier Fpodeyf Nu Topfx Adaod

Condition: reconditioned (used), Connected load 380V 13A 5.5kW main drive motor + 0.7kW feed motor, planing width 630 mm, Tersa cutterblock with 4 knives, stepless feed 6-18 m/min, star-delta switch, mechanical table height adjustment via hand lever, drive via cutterblock, fine adjustment by handwheel, mechanical digital display for planing height, 1x table roller, extraction connection 160 mm, 1x steel infeed roller, 1x steel outfeed roller. Fodpfjxdl U Ejx Adaopd

Condition: good (used), Year of construction: 2002, Edge banding machine with Fuegefraesen otherwise fully equipped PU glue is suitable Fpjdpfsgmn H Aox Adasd

Condition: ready for operation (used), Year of construction: 2019, This SCM Class SI 400EP panel saw was manufactured in 2019. It features a maximum saw blade diameter of 400 mm and a cutting width on rip fence up to 1500 mm. The sliding table saw offers a squaring stroke of up to 3800 mm. Ideal for precise wood panel cutting. Contact us for more information. Fpjdpjyabkvefx Adaod • Machine Condition: Very good • Maximum Saw Blade Diameter (with Mounted Scorer): 400 mm • Maximum Saw Blade Projection from Table at 90° / 45°: 140 / 97 mm • Cutting Width on Rip Fence (Rip Capacity): 1000 – 1500 mm • Maximum Squaring Stroke of Sliding Table Saw: 3200 – 3800 × 3200 mm • Three-Phase Motor Starting From: 7 kW (8 kW) / 50 Hz (60 Hz)

Condition: excellent (used), Year of construction: 1997, Rover 20 machining center Working area 2,893 x 950 mm, milling spindle with ISO30 tool holder 3.6 kW, drilling unit with 10 vertical and 6 horizontal drills as well as grooving saw, 6-fold tool changer. The NC410 control had a floppy disk drive and a colour screen as well as the simplest, graphically supported programming options. Furthermore, the Rover 20 already enabled pendulum machining. Fpedpfxolc Dwno Adajd Dimensions: approx. 3800 x 2000, height 1600 Control cabinet: 950 x 700 x 1300 From location

Condition: new, Year of construction: 2023, power: 7 kW (9.52 HP), planing width: 520 mm, number of blades: 4, overall weight: 483 kg, height adjustment type: electric, planer shaft diameter: 120 mm, planing height: 240 mm, SCM MiniMax s 52es thicknesser Specifications: - condition - new - manufacturer - SCM - width of the thicknesser table - 520 mm - length of the thicknesser table - 850 mm - minimum thickness of the element - 3 mm - maximum thickness of the element - 240 mm - maximum thickness of the thicknesser harvest - 5 mm - motor power - 7 kW - supply voltage - 400 V - shaft for 4 conventional knives Fsdpfx Asqu U Dnedajpd - diameter of planer shaft - 120 mm - rotational speed of the planer shaft - 5000 rpm - maximum planing width - 520 mm - feed speed - 5 / 8 / 12 / 18 m/min - diameter of the exhaust stub - 120 mm - weight (net) - about 493 kg - overall dimensions - 144 x 108 x 110 cm ( W x L x H ) Additional information: - machine brand new - pictures show the actual state of the object of sale - possibility to turn on and check the machine on site. - the price given in the auction does not include VAT and transport costs - available from stock in Italy

Condition: used, Year of construction: 2000, grinding length 800 mm centre height 150 mm Control FANUC grinding wheel size max. 400 x 63 x 127 mm workpiece weight 120 kg engine output 7,5 kW turning speed range - grinding wheel 45 m/s m/s swivelling range +45/-15° Grad work piece spindle speed 22-313 / 51-750 U/min workpiece spindle swivable +/- 90 ° tailstock quill taper MT MK 4 x-travel 355 mm z-travel 4,0 mm Working speed 0 + 7,5 m/min weight of the machine ca. 4,0 t dimensions of the machine ca. BTH 3,7 x 2,2 x 1,9 m -incl. Coolant system -incl. Lynette -incl. Sharpening diamond -incl. open Lynette -incl. 3 pieces of grinding discs -incl. 3 pieces of flanges Fpodpfju Hag Nox Adasd -incl. Internal grinding spindle attachments

Condition: like new (used), Year of construction: 2019, I sell the horizontal throughfeed CNC working centre Vitap Point K2 2.0, Year 2019. Configuration: Fpedpfx Adevx Dz Deaed 1 pc. milling spindle 5,0 KW 12 + 4 + 4 pcs. drilling units 1 pc. grooving saw Backfeeding system to return the elements to the operator or move forwards as a throughfeed machine. Workpiece max. dimension - x 1250 x 50 mm Workpiece min. dimensions 270/400 x 185 x 4 mm Total area covered: 2900 x 1650 mm Total weight: 950 kg. With full documentation and CE. Very good condition. Available immediately.

Condition: as good as new (ex-display), ►►► FRONIUS TPS 3200 SET OFFER ✅ Scope of delivery: ➤ Fronius TPS 3200 Power Source (320A TRANS PULS SYNERGIC) ➤ Fronius FK 4000 FC Cooling Unit – Standard features include Flow Control, Thermocontrol, and coolant filter. The cooling unit shuts off if the water cooling fails or gets too hot, to protect the torch package. These functions cost approximately €400 extra from Fronius. ➤ Fronius VR 7000 Wire Feed Case – Compact and practical – in our experience, the most useful wire feed case – the wire is securely stored in the closed case. ➤ Fronius Intermediate Hose Package, long version – each machine is supplied with a 5-meter-long connection hose between the power source and the wire feed case for greater flexibility and improved handling. Take the wire feed case off the machine to access hard-to-reach areas! The connecting hose is neatly stored on a hook on the side of the machine. (Hooks are produced by us) ➤ Fronius Large Trolley – Probably the best trolley with a gas bottle holder on the market. ➤ Binzel Torch Package – With up/down amperage control on the torch. ➤ Ground cable 3-4m ➤ New Messer pressure regulator ➤ New basket reel adapter for large wire spools With this machine, almost all materials can be welded, including aluminum, steel, and stainless steel (V2A). It features pulse wire programs and is also suitable for MIG brazing (CuSi), commonly used in the sheet metal industry. Additional options are available at extra charge For example: Fronius Aw4000/Aw5000 Job Master Torch Package (with display on torch) + EUR 550.00 ----- IMMEDIATELY AVAILABLE PROPER INVOICE Inspection is possible in Austria, Vienna 1230! ✔ Insured shipping on a pallet is no problem! ✔ Fpsdpfx Adswbil Seaod We are also available via WhatsApp and Viber. ✅Questions✅Questions✅Questions✅Questions: ✅Questions✅Questions✅Questions✅ ►►► What is the condition of the equipment? For clarification: we purchase nearly new used equipment, disassemble and thoroughly inspect everything, replace wear parts as necessary, and only after a successful test weld do we release the equipment for sale. "All" machines are clean with no burn marks on the displays and without numerous burn holes or dents! With us, you buy an item that is ⭐in excellent condition and doesn’t look worn out! ►►► Do we receive an invoice when purchasing from you? Yes, you will receive a proper invoice from us. If you have a valid VAT ID and meet the requirements for intra-community delivery within the EU, we can issue a net invoice. ►►► What payment options are available? Prepayment or cash on personal collection. ►►► Why buy from us? We are experts in this series of Fronius welding machines and always have 60-80 units in stock – exclusively Fronius, no other brands! We know these machines inside out and do not sell anything we don’t have expertise in.

Year of construction: 2022, condition: new, ZIM T1200 machine can produce pipes 300mm – 1200mm diameter and 500mm – 2500mm height by single, double and triple pressing. 150mm and 200mm pipes also can be produced for special demands. Machines can be designed semi or full automatic according to requirements. We use SIEMENS brand PLC microprocessors on automatic machines. There exists motrar bunker and motrar filling systems on machines. Fsdsibbikopfx Adaopd Produced materials can be carried to drying area with carriage carts or forklifts. Production is done on production pallets, Materials up to 800mm diameter are carried to drying area with carriage carts, pipes bigger than 800 mm diameter can be carried with forklift. For fast production, pipes bigger than 300mm diameter also can carried to drying area with forklift. Machine makes production by hydraulic press and vibration. Vibration system of the machine is special design of ZIM Engineers. Vibration system which have oil cooling system and special oil unit. This system can be controlled electronically. Special designed strong chassi of the machine enables long live producing without errors.