Used Granules for sale (655)

Condition: used, Granulator / Granulators Brand: HERBOLD Model: SMS 45/100-H5-3 Semi-open 5x2 knife rotor, 2 stator knife rows. Machine is equipped with replaceable third bed knife (deflector) to handle thick-walled materials. Infeed hopper for conveyor belt feeding. Rotor mounted outside the housing. Housing split in the middle, can be opened with a hand winch. Double inclined cut design: Rotor and stator knives are arranged opposite each other and cut like scissors. With base frame incl. vibration dampers. Machine data Nkedpexb Aggofx Adwot Rotor knives: 5 x 2 Stator knife rows: 2 Drive: 75 kW

Condition: used, Condux Granulator type CS 300/600-4 WK Rotor diameter: 300 mm Njdexgtfwjpfx Adwokt Rotor width: 600 mm Rotor knives: 3 Housing with 4 stator knives Drive motor 11 kW (on request max. 30 kW)

Condition: used, Condux Granulator type CS 300/600-4 WK Nkedpfx Adexgrfiewet Rotor diameter: 300 mm Rotor width: 600 mm Rotor knives: 3 Housing with 4 stator knives Drive motor 11 kW (on request max. 30 kW)

Condition: used, Cutting mill Manufacturer: HERBOLD MECKESHEIM Type: SMS 80/160 Rotor 800 x 1600 mm wide Nkjdpexgthrefx Adwet Drive motor 250 kw

Condition: used, power: 160 kW (217.54 HP), Cutting mill TRIA 120-80 FN / Cutting mills New hydraulics, new knives, new bearings Drive: 160.0 kW Rotor knives: 7x2 Stator knives: 2x2 Rotor diameter: 700 mm Rotor width: 1200 mm Inlet: 800 x 1200 mm Nkjdpfx Adoxgrfvjwst

Condition: used, Drive 37kw (ca be changed to max. 75 kw) rotor diameter 500 mm rotor width 600 mm 5 knive scissor cut, housing hingeable, with 2 stator knives Njdpfx Adsxgrgyowjkt Opening inlet 500 x 600 mm

Condition: used, Refurbished granulator, heavy-duty series, hard-faced Can be used for dry and wet shredding Typical applications: Plastic hollow bodies, secondary shredding of pre-shredded waste, Rotor 800 mm diameter x 1600 mm width Open F7 rotor with replaceable blade supports Drive power 160-250 kw With forced feeding by 3 load-dependent controlled feed screws Hydraulically hinged, hydraulically swiveling screen basket Throughput capacity up to 5 t/h depending on material and grain size Nedpfjxgtgnox Adwokt

Condition: used, Cutting mill / Cutting mills Nkodexgth Eepfx Adwst Manufacturer: HERBOLD Meckesheim GmbH Type: SMS 45/60 Heavy-duty series Infeed opening 600 x 680 mm Drive motor 75 kW

Condition: used, HERBOLD granulator type SMS 60/100 Heavy version Inlet opening 700 x 1000 mm Open rotor 600 mm diameter x 980 mm width Nksdpfx Adoxgtm Uowjt (optionally as open 3- or 7-blade rotor) Drive motor 110 kw Folding device with electric winch

Condition: used, power: 160 kW (217.54 HP), New hydraulics, new blades, new bearings Drive: 160.0 kW Rotor knives: 7x2 Stator blades: 2x2 Rotor diameter: 700 mm Nsdpfoxgtqasx Adwskt Rotor width: 1200 mm Inlet: 800 x 1200 mm

Condition: used, Granulator / Granulators Manufacturer: HERBOLD Model: SMS 45/100-H5-3 Semi-open 5x2 knife rotor, 2 stator knife rows. Machine is equipped with a replaceable third bed knife (deflector) for processing thick-walled materials. Inlet hopper suitable for conveyor belt feeding. Rotor mounted outside of the housing. Housing split in the middle, can be opened with a hand winch. Nodpsxb Adlefx Adwokt Double inclined cut design: rotor and stator knives are positioned opposite each other and cut in a scissor-like manner. With base frame including vibration dampers. Machine data Rotor knives: 5 x 2 Stator knife rows: 2 Drive: 75 kW

Condition: used, Cutting mill / cutting mills Manufacturer: HERBOLD MECKESHEIM Nksdpfx Adoxgq Ucjwjt Type: SMS 80/160 Rotor 800 x 1600 mm wide Drive motor 250 kw

Condition: used, Infeed: approx. 300 x 300 mm Rotor width: approx. 280 mm Rotor knives: 3 stator knives: 2 Drive: 7,5 kW Nksdpjxgtmuofx Adwjt Double diagonal cut With roller feeder, electric control unit and sound insulation box

Condition: used, Refurbished granulator, heavy-duty series, hard-faced Can be used for dry and wet shredding Typical applications: Plastic hollow bodies, secondary shredding of pre-shredded waste, Rotor 800 mm diameter x 1600 mm width Open F7 rotor with replaceable blade supports Drive power 160-250 kw With forced feeding by 3 load-dependent controlled feed screws Hydraulically hinged, hydraulically swiveling screen basket Nodpexgtthjfx Adwjkt Throughput capacity up to 5 t/h depending on material and grain size

Year of construction: 2025, condition: new, Equipment: CE marking, The granules filling packaging machine can filling the granules materials, such as beans, rice, sugar,almonds and other granular materials Filling capacity: 5-5000g Filling speed: 400-600 bags/hour(Base on 1kg) Material: Food grade 304SS Njdpfx Aexyiz Ijdwekt Power: 1.5KW Voltage: 220V 50HZ Single phase

Year of construction: 2022, condition: like new (used), functionality: fully functional, A very rare opportunity to acquire a 3 year old 600 kgs per hour, complete hot wash recycling and cleaning line suitable for a range of rigid polymers to be size reduced and cleaned. Machinery has very low hours of operation, and is only available as a result of re-organisation of the companies operations. Materials are firstly delivered via a picking belt and metal detection tunnel, from a cage tipping device to a large Hot washing granulator. Size reduced materials then drop onto a vibrating sieve ,to separate the majority of dirty water, and then materials transfer to an inclined Archimedes screw delivering materials to a horizontal high speed centrifugal cleaner. After this cleaning the materials enter a large diameter vertical drying centrifuge with the finished materials then conveyed to a ZigZag air separator, before being blown to the cyclone over a double bagging tower. The fines separated at this stage are blown to a separate cyclone over a single bagging tower for fines and fibres etc removed by the ZigZag tower. The entire line can be seen in operation in the UK and by special arrangement could be trialed with potential buyers materials. Used water caould be recycled through the system, but this is dependent upon the type of contamination to be removed. The entire line is of European manufacture, and all materials exposed to water are manufactured in Stainless Steel. Decommissioning, Transport, Installation and commissioning together with operator training can also be offered internationally to a buyer of the equipment. Nkjdpfx Adoxcnxdswst

Condition: excellent (used), Year of construction: 1997, power: 1.5 kW (2.04 HP), Tria plastic grinder, shredder, granulator for sale in excellent condition make: TRIA 20-15/BL-T Power: 1.5kW, 50Hz, 380V Year of manufacture: 1997 Nkodpfxjra N A No Adwjt Inlet opening: 200 x 230mm rotating knives 3 pcs standing knife: 1 pc Spout opening: 60mm Final product size: 3-5mm Capacity: 30 kg/h approx.

Condition: excellent (used), functionality: fully functional, Heavy-duty cutting mills Manufacturer: Herbold AMIS Type: SM 60/100 7-2 Nedpfx Adsufi Rxjwekt Inlet opening 700 x 1000 mm Open rotor 600 mm diameter x 980 mm wide Rotor blades: 7 Stator blades: 2 plus blade set: 2 Blade setting table

Condition: used, Granulate Dryer, Granulate Drying Unit, Hot Air Dryer, Used Machine Manufacturer: MOTAN Nksdpfx Adexv R T Dewst - Model: MDC400; Serial No.: 1753 (Year: 1999) - Airflow: 400 m³/h - Heating Capacity: 21 kW - Electrical Data: 400 V; 22.5 kW; 34.5 A

Condition: excellent (used), Complete silos containing of 4 silo cells, 40m3 each, 160m3 in total.Sold as a set, with all documentation, and complete set of transporters. Already assembled, ready for loading. Nkedpfxsxfdavj Adwjt

Condition: ready for operation (used), Specifications: Model: 1120SPL Manufacturer: Hosokawa Polymer Systems (USA) Cutting chamber: 11" x 20" (279mm x 508mm) Njdpfoxvc D Ujx Adwekt Motor: 20 HP / 15 kW, 400V, 3 Phase Rotor diameter: 12.5" (318mm) Rotor knives: 3 Bed knife: 1 Screen area: 373 in² (2406 cm²) Typical throughput: up to 650 lbs/hr (≈295 kg/hr) depending on material and screen size Approx. weight: 1,600 lbs (726 kg) Dimensions: L 69” x W 36” x H 57” (1753 x 914 x 1448mm) Features: Heavy-duty welded steel construction Easy access for cleaning and maintenance Safety interlocks and belt-driven motor Ideal for press-side, post-production, or recycling use Clean and well-maintained unit – ready to run

Condition: ready for operation (used), Specifications of NEUE Herbold SB 60/145 S7-3 Motor Power: 70kw Feed Opening: (approximately 620 mm x 565 mm) Rotor Configuration: 5-knife open rotor staggered Bed Knives: 2 Nsdpfx Adow R Un Ajwskt Installed Screen: 3/16" (approximately 4.76 mm) Additional Equipment: Control panel with soft-start feature Voltage: 460V / 3-phase / 60 Hz Extras: Includes seven extra screens We supply a wide range of granulators designed for plastics recycling, manufacturing, and waste reduction. Whether you need compact units for light-duty use or heavy-duty machines for high-output production, we have the right solution.

Condition: good (used), Year of construction: 2009, operating hours: 7,500 h, Asphalt Recycling Granulator. The ad is being edited, more detailed specifications & Plant description will follow. Nedpfx Aewcggisdwskt Transport can be organized if required. Welcome to Oussman-Machinery Please feel free to contact us for any further information. We speak: english, german, arabic & french.

Condition: good (used), Mouth width: 150x80mm Njdjfhnv Ijpfx Adwskt 2 rotor blades (95mm)

Year of construction: 2004, condition: good (used), Granulator Rapid 3560 KUB – incl. cyclone, piping, spare blade sets and conveyor Year: 2004 Condition: In daily operation – test run available For sale a well-maintained Rapid 3560 KUB granulator complete with cyclone system, piping, conveyor and spare knife sets. The machine is in continuous production and can be demonstrated on request. Included in the package: Cyclone Piping Conveyor Spare blade sets Fully operational system – ready for use Additional information: Year of manufacture: 2004 Nkodox Eld Sopfx Adwjt Test run possible before purchase Sold in good working condition