Used Great Cnc Milling for sale (16,570)

Condition: good (used), Year of construction: 2004, spindle passage 60 mm turning length 280 mm control 840 D Siemens turning speed range - drive spindle 6300 U/min drive capacity - spindle motor 3,3 kW turret 1 Scheibenrevolver no. of tools in turret 1 8 Fodjwbvhaspfx Aabogh worktool system DIN 69 880 / 25mm x-travel 90 mm z-travel 280 mm feed power 5500 N rapid traverse 24 m/min power capacity - milling spindle 5000 kW turret Schwalbenschwanz no. of tools in turret 2 6 x-travel 81 mm z-travel 80 mm feed power 5500 N rapid traverse X-axis 16 m/min rapid traverse Z-axis 24 m/min weight of the machine ca. 2,5 t dimensions of the machine ca. 6,0 x 2,0 x 2,0 m TThe INDEX ABC machine is a compact lathe for short turned parts made from bar stock. It has an inclined bed design with two independent turrets. The top turret is primarily intended for internal machining and machining, while the lower turret is used for external machining. The turret arrangement enables collision-safe working and simple programming programming with high tool availability. The large free space in the working area enables a favourable chip fall The work area consists of two turrets: ‘Turret 1’ - Disc turret with 7 radially arranged tool holders Ø 25 mm DIN 69880 and a holder for the reinforced synchronised spindle on the turret station 8. tools with 1’ holders can also be used with an equalising holder can also be used. The turret is prepared for the V-ledge system. - Synchronised spindle for rear end machining, simultaneous parallel machining with main spindle. Ø42 collet chuck or 3-jaw gripper chuck for internal and external clamping and external clamping. Jaw stroke 0.6 mm. Clamping diameter (external) 75 mm. - Back-boring device. Starting from the centre of the working spindle in clockwise direction, 3 stationary back-boring tools are back boring tools are arranged. These are located in the pitch circle of the synchronised spindle. The back machining is carried out simultaneously with the machining on the the working spindle. Two additional tools can also be used, can be equipped with a tool feed drive. ‘Revolver 2’ - Turret with 6 symmetrical dovetail holders and each station with 2 locating holes for cylindrical shank per station. The following tool systems can be used. - stationary tools that can be moved in the Z direction - Driven tools with cylindrical shank Ø25 (can be used in two positions per station) can be used) - including bar loader LM 3200 - + various accessories (various Ø guide half-shells/tool holders) Technical data: - Material bar diameter: (Ø 25 / Ø 36 / Ø 52)- --> round Ø 8 - 25.4 / 8 - 36 / 8 - 52 mm --> square SW Ø 6 - 14 / 6 - 20 / 6 - 20 mm --> hexagon SW Ø 7 - 22 / 7 - 30 / 7 - 41 mm --> octagonal SW Ø 7 - 22 / 7 - 32 / 7 - 40 mm --> bar length max. 3200 mm --> from bars Ø 25 mm, min. 2,500 mm --> up to rods Ø 25 mm, min. 1,500 mm --> bar support = approx. 300 = 6 bars Ø 52 mm Mass (bar loader) = 700 kg

Condition: excellent (used), Year of construction: 2008, DMG CTX 510 Sinumerik 840D Machine in perfect condition, equipped with bar feeder and C axis Spindle operating hours: 6720 Spindle bore: 95 mm Collet chuck Forkardt D=100 mm max; I also have a brand new Hainbuch SK100 collet chuck for this machine Tool holder VDI 40 Fedpfx Asr Ak S Neabogh

Condition: excellent (used), Year of construction: 2013, operating hours: 30,000 h, functionality: fully functional, Control: Siemens 840 D Country of origin: EU – Poland Voltage: 400V Dimensions: 3082x2260x1775 mm (with chip pan), 4228x2260x1775 mm (with chip conveyor) Net machine weight: 3400 kg TECHNICAL DATA CTX 310 ecoline V1/V3 New Design Working range - Max. swing over bed: 330 mm - Max. swing over cross slide (X-axis): 260 mm - Max. turning diameter: Ø 200 mm - Chuck diameter: Ø 210 mm - X-axis travel: 182.5 mm - Z-axis travel: 455 mm - Centre height: 190 mm - Distance between centres: 581 mm Feed drives - Rapid traverse speed X/Z: 30 m/min - Control: Siemens Sinumerik 840D Slim Line - C-axis with Siemens control - Speed: 0 – 100 rpm - Torque: 112 Nm - Accuracy: < 0.04° Spindle - Spindle nose: 140 h5 mm - Front bearing inner diameter: 100 mm - Spindle bore: Ø 74.3 mm - Max. bar capacity: 51 mm - Main drive with Siemens control - Drive power (40% / 100% DC): 16.5 / 11 kW - Torque (40% / 100% DC): 166.5 / 112 Nm - Max. spindle speed: 5000 rpm Turret - Number of tool stations: 12 - Tool holder: DIN69880 (VDI 3425) - Shank diameter: 30 mm - Tool change (with indexing lock): 0.95 s - Tool change (without indexing lock): 0.4 s - Turret with Siemens control - Number of driven tools: 12 - Drive power (40% DC) at 4000 rpm: 8.4 kW - Torque (40%): 20 Nm - Max. speed: 4500 rpm Tailstock - Automatic stroke: 396 mm - Quill type: flange-mounted - Max. quill axial force: 400 daN Hydraulic unit - Tank capacity: 50 l - Max. pressure: 50 bar Cooling system - Tank capacity: 175 l - Capacity with conveyor: 200 l - Pump power: 0.85 kW - Pump output at 5 bar: 30 l/min Electrical connection - Max. power: 21 kVA - Voltage: 400V - Frequency: 50–60 Hz Fgsdpoxdiarjfx Aabsh - Fuses: 33 A Pneumatics - Compressed air connection: 6 bar

Condition: good (used), Year of construction: 1996, CNC Milling Machine Hermle UWF 902H + Renishaw probe + 34-position tool changer The horizontal spindle was defective and has been removed! Fjdpfjw U Dvqsx Aabogh Year of manufacture: 1996 Control: Heidenhain TNC 426 Spindle hours: approx. 9,000 Operating hours: approx. 60,000 Spindle: SK40 Speed: 20 - 6,300 rpm Travel: X 600 / Y 450 / Z 500 mm Table: 600 x 450 mm Total power requirement: 16 KVA Dimensions (approx.) LxWxH: 300 x 220 x 230 cm Weight: approx. 5 t

Condition: ready for operation (used), empty load weight: 5,300 kg, nominal power: 205 kW (278.72 HP), Tos FA5AV X: 1400 - Y:420 - Z: 400mm Max longitudinal travel X-axe: 1400 mm Max cross-travel Y-axe: 420 mm Max travel Z-axe: 400 mm Admission in millinghead: ISO 50 Table size: 1600 x 400 mm Fgsdsxbukdopfx Aaboh

Year of construction: 2025, condition: new, Multifunctional CNC drilling and milling center for processing all types of profiles. Processing of aluminum and PVC profiles for doors and windows. Fsdpfx Asw T Sldoabogh The multifunctional CNC (Computer Numerical Control) drilling and milling center is a high-tech machine designed to perform a wide range of metalworking operations. This type of equipment combines functions such as drilling, milling, reaming, tapping, and sometimes even turning, providing high precision and efficiency when machining various materials including metals, alloys, wood, and PVC. Key Features and Advantages: - High precision and repeatability: Thanks to its computer control, CNC centers can perform complex and multi-stage operations with micron-level accuracy. - Flexibility: The multifunctional centers allow for rapid retooling, accommodating different operations and handling parts of various sizes and shapes. - Automation: These machines are automated, significantly reducing the need for human intervention and the risk of errors. - Reduced production costs: By integrating multiple operations into a single machine, equipment, time, and labor costs are optimized. - Capability to machine complex shapes: CNC centers can process intricate geometrical parts that would be difficult or impossible to achieve with manual machines. Main Components: - Control system (CNC): Manages all machine movements and operations according to the pre-programmed instructions. - Worktable and spindle: The area where workpieces are clamped and the spindle that drives the tool movement. - Tool magazine: Stores various machining tools for automated tool changes. - Cooling and lubrication system: Maintains optimal working temperatures and protects both tools and materials. Applications: CNC multifunctional centers are used in multiple industries, including automotive, aerospace, electronics, and mechanical engineering, where precise machining and complex geometries are required. These machines offer high productivity, reduced setup times, and significantly improved quality control, making them indispensable for modern manufacturing. Brand new!!!

Condition: used, Year of construction: 2002, functionality: fully functional, machine/vehicle number: M270069, Used machining center in perfect working condition, currently in daily use. We are selling it because we are purchasing a new one and do not have space to keep both. Viewing in operation is possible by appointment. Price: €20,000 excluding VAT, sold as seen. Transport is not included. Any costs for customs documentation and external shipping are excluded. Fodpfxjxdub Uj Aabogh

Condition: used, Year of construction: 1995, x-travel 700 mm y-travel 315 mm z-travel 495 mm turning speeds 50 - 9200 U/min spindle taper ISO SK 30 DIN 69871 A quill stroke 178 mm table: 1230 x 410 mm workpiece weight max. 250 kg T-slots 7 x 12-H8 feed range X+Y 9.000 / Z 4.000 mm/min solution in X-, Y- und Z-axis 0.001 mm distance spindle /table 165 / 660 mm 32 weight of tools max. 3.0 kg Time for tool-changing ca. 5.0 sec Boring power Ø 30.0 mm threading M 24 Milling performance 100 cm³/min coolant capacity 100 l control TNC 415 B voltage 3x 400 V total power requirement 16.0 kW weight of the machine ca. 3400 kg range L-W-H 2500 x 2500 x 2800 mm Good / well-maintained condition (!!) - in checked conditions - machinevideo - ?v=vISK1iCGZ_g Features: - Robust machining center - Vertical * Vertical milling and drilling machine in single-column design * With integrated coordinate table * Height-adjustable machine head with extendable spindle sleeve - CNC HEIDENHAIN control unit "TNC 415 B", front left * Includes separate remote control - Electric motor adjustment of all axes (X/Y/Z/W axes) * Rapid traverse in all 4 directions * X+Y axes .. max. 9.000 mm/min Fgedpfxexab Uas Aabjh * Z axis .. max. 4.000 mm/min * W axis .. max. 4.500 mm/min - Continuously variable speed .. 50-9.200 rpm - Heavy-duty, robust coordinate table including 7 T-slots * Two telescopic steel covers protect the cross guides * X-axis: dovetail guide * Y-axis: preloaded roller shoes on hardened steel rails * Axis driven by ball screws * With preloaded double nuts * And DC servo motors mounted directly in the spindle axis * Both axes are equipped with linear scales (direct position measurement) - CNC-controlled machine head (W axis = feed axis) * Driven by DC servo motors / toothed belt drive and ball screw * Machine head is permanently mechanically clamped by disc spring assemblies * For a secure and stable connection between the head and the machine bed * Milling and drilling spindles are mounted in the quill, . requiring no maintenance * Spindle head according to DIN 2079 allows for the use of SK 30 tools * Tool changer with 32 positions - Machine base with two drawer cabinets for machine accessories * Includes numerous tools - Work area with fully protected cabin * With wide-opening cabin doors - Coolant with external coolant reservoir - VOGEL automatic central lubrication system * Supplies oil to the guides, spindles, and drive - Original operating instructions + spare parts lists

Condition: excellent (used), Brand: CORREA Model CF-17 Cnc : HEIDENHAIN 360 Table size : 2000 x 700 mm Number of T-slots: 5 x 22 Distance between T-Slots: 125 mm X axis Travel : 2000 mm Fjdoxcy D Sopfx Aabegh Y axis travel : 800 mm Z axis travel : 800 mm Rapid traverse: 12.000 mm Spindle nose: ISO 50 Diameter of front bearing : 85 mm Turning ranges : 20-2750 rpm Range : 5-5000 Spindle power : 17 kw Max. Weight carrying on table : 3.500 kg Machine weight: 9.000 kg

Year of construction: 2016, condition: ready for operation (used), Control Unit Brand SIEMENS Model 840D sl Main Drive Spindle speed range 9000 Stroke 200 mm Number of axis 3 Control Unit Brand SIEMENS Model 840D sl Main Drive Spindle speed range 9000 Stroke 200 mm Number of axis 3 This 3-axis HELLER PT 16 was manufactured in 2016. It features a multifunction spindle driven by a compact servo motor, achieving speeds up to 15 m/min and a maximum of 9,000 rpm. The machine offers a 200mm stroke in 3 axes with ball rail guides and screws for enhanced precision. Consider the opportunity to buy this HELLER PT 16 CNC milling machine. Contact us for more information about this machine. Fodpfjw Tnn Ujx Aabjgh Application Types Milling

Condition: ready for operation (used), total height: 3,870 mm, total width: 3,417 mm, total length: 10,994 mm, controller manufacturer: Heidenhain, empty load weight: 23,500 kg, 4 assen gelijktijdig + B- en C-as hoge druk koeling door spindel (20 bar) 4e as op tafel (zowel horizontaal als verticaal) centraal smeersysteem Gereedschapswisselaar met 40 posities Spaantransportband Longitudinal travel X-axe: 6000 mm Crosstravel Y -axe: 1200 mm Travel Z-axe (Height): 1500 mm Power on spindle: 36 kW Admission in millingheadspindle (ISO): ISO 50 Max speedrange: 40 > 3000 rpm Fsdoxbukwspfx Aabjgh

Year of construction: 1988, condition: used, table mounting size: 650 x 1600 mm movement x: 1250 mm movement y: 800 mm movement z: 620 mm spindle taper: ISA 50 spindle turning speed range: 5 - 2000 rpm carriages continuously adjustable: 5 - 3000 mm/min rapid move: 10 m/min space needed: 3850 x 3000 x 3200 mm weight: 11100 kg FIDIA-control ADDENDUM V 05-E CNC 12 Fodpfx Aajxnq Isbegh Only 8577 hours on-time!

Condition: like new (used), Year of construction: 2004, Retrofitted: 2025 Numerical control: NUEVO/NEW HEIDENHAIN TNC-i640 Fedpfx Aeu T S Dweabegh Technical features Dimensions Table dimensions: 5600 x 2000 mmMaximum weight on table: 25000 kgNumber of T slots: 13T slots dimensions: 22 mm Traverses of axis X axis traverse: 5000 mmY axis traverse: 3250 mmZ axis traverse: 1000 mmVertical capacity (VC): 450 / 1450 mmDistance between columns: 2700 mm Milling head Auto-indexing differential head (UAD - 0,1º)Tool clamping system: HydraulicTaper nose: ISO50 (DIN69871)  /  Pull stud: DIN69872Speed range: 6000 rpmSpindle power: 30 kW Feedrates Rapid feedrate (X / Y,Z): 7200 / 12000 mm/min Weight and dimensions Machine weight approximate: 56000 KgMachine dimensions approximate: 13200 x 5425 x 5350 mm Accesories Guarding: 2 sliding doors with a perimetral wire-mesh fenceAutomatic tool changer: OptionalChip conveyor: 1 transversal hinge typeElectronic handwheel: New HR-510Coolant: External internal high pressure through spindle Sales conditions Guarantee: 6 months mechanical spare partsSale price (Ex Work): On request View all technical features

Condition: used, Year of construction: 2001, x-travel 400 mm y-travel 250 mm z-travel 400 mm tool taper ISO 40 spindle turning speed range 30-6300 / 20-4200 U/min feeds 0 - 10.000 mm/min quill stroke 90.0 mm table-size 600 x 320 mm T-slots 5 x 14 x 63 mm Control TNC 410 CA spindle ein ~ 126 Std. engine output 11.0 kW weight 1300 kg dimensions of the machine ca. 1600 x 1500 x 1900 mm Original price incl. special accessories ~ 72.000 euros Machine was very rarely used (!!) with only approx. 126 spindle hours (spindle on) Furnishing : - MACMOM / INAS CNC universal milling and drilling machine - HEIDENHAIN CNC path control TNC 410 CA * workshop-oriented path controls, with * Programming in easy-to-understand plain text dialog * HEIDENHAIN electr. Remote control with handwheel - Pivoting control panel, to the right of the machine - hydraulic tool clamping (tie bolt DIN69872-A) - Vertical milling head rotating on both sides - ISO 40 - Vertical speed range - infinitely variable .. 30-6300 rpm. - Horizontal speed range - stepless .. 20-4200 rpm. - robust, rigid angle table with 5x T-slots - Coolant device, with tub - Swarf spray protection cabin - Instruction manual for machine Special accessories included : - 1x pneumatic clamping plate, with aggregate - 1x WALTER TANIH125 NEGI-R dividing head - 1x machine vice - HILMA RÖMHELD type SM 100 - very many tool holders - Machine swing feet * Machine video : ?v=3dqLbTme81E Fgjdoxab T Aepfx Aabsh

Condition: new, functionality: fully functional, total length: 3,950 mm, total width: 1,220 mm, total height: 1,610 mm, overall weight: 1,900 kg, input frequency: 50 Hz, input voltage: 400 V, Fully automatic large-format edge polishing machine with CNC control and pivoting milling/polishing unit for finishing sawn or pre-milled surfaces. The machine is suitable for transparent, technical, or decorative plastics (PMMA, PC, PETG, etc.) as well as for the processing of composite materials (PMMA with paper or aluminum). The required process parameters can be conveniently retrieved via the integrated material library, based on the material to be processed and the desired surface finish. A tool recommendation and the corresponding setup for the specific operation are also displayed. The high precision of the polishing table significantly reduces the formation of streaks during processing. Additional mounting points for side stops or further guiding aids allow for flexible adaptation to any product. Specific features: - CNC control with material library - Machine body and front stop - Milling/polishing unit - Working area - Multifunctional table - Tools Technical data*: Material thickness (0°/45°/60°): 2 - 120/85/60 mm Material length: 20 - 3,050 mm (with turnover) up to 6,100 mm Table width: 525 mm Pivot range: 0° - +63° Milling depth (0°/45°/60°): 0.05 - 1.5/3/3 mm Spindle speed: 6,000 - 12,000 rpm Feed speed: 0.1 - 5 m/min Return speed: 50 m/min Number of clamping cylinders: 6 (optionally up to 20) Number of side stops: 1 (optionally up to 8) Extraction port Ø: 100 mm Machine length: 3,950 mm Machine width: 1,220 mm Machine height: 1,610 mm Working height: 926 mm Compressed air supply: 6 bar Operating voltage: 400 V, 50 Hz, +PE +N Milling motor power: 4.5 kW Drive motor power: 1.2 kW Total power: 7.5 kW Weight: 1,900 kg Tool type: EURACRYL ES with quick-change system Vacuum table: Included Remote maintenance: Included Tool holder: Included (1x tool holder for 4 inserts) Tool: Not included *Subject to material tests, depending on material type, tool equipment, and surface finish Scope of delivery: - 1 operating manual Fgedpfxsxd Si Ao Aaboh Item no. 0175200

Condition: like new (used), Year of construction: 2009, OKUMA MULTUS B400 MULTIFUNCTION TURNING CENTER Brand: Okuma Model: MULTUS B 400 Year: 2008 Includes tooling and documentation C axis / B axis / Y axis Machine in good and operational condition PRICE AND MORE INFORMATION UPON REQUEST Fodpexghypefx Aabsgh (CNC, SIEMENS, HASS, LAGUN, FAGOR, CINCINATI, HEIDENHAIN, MACHINING, PINACHO, MORISEIKI, MILLING MACHINE, LATHE, GRINDER, BORING MACHINE, PRESS, LASER, SHEAR, PRESS BRAKES)

Condition: good (used), Year of construction: 2006, functionality: unexamined, machine/vehicle number: 784, Machine Name - CMZ Machine Model - TL25 Y.O.M 2006 S.N 784 Description - Control Fanuc 31i Chuck size 250mm Swing 400mm 76mm spindle bore Fedpfxov A Ey Ae Aabogh Max.turning diameter 676mm 12 Station turret Live tooling Sub spindle Swarf conveyor Tool setting probe Gantry loader Manuals

Year of construction: 1989, condition: used, machine/vehicle number: 2204-1736, table mounting size: 460 x 800 mm movement x: 485 mm movement y: 385 mm movement z: 380 mm tailstock stroke: von Hand ca. 70 mm spindle turning speed range: 50 - 3150 rpm Fedoclli Uopfx Aabsgh carriages continuously adjustable: 2 - 1000 mm/min rapid move: 2 m/min electrical connection: 3,7/4,4 kW space needed: 2100 x 1650 x 1730 mm weight: 1850 kg

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, machine/vehicle number: 8044000703A, Siemens 840 D Control Country of manufacture: EU - Poland Voltage: 400V Dimensions: 3082x2260x1775 mm (with chip tray) 4228x2260x1775 mm (with chip conveyor) Machine net weight: 3400 kg TECHNICAL SPECIFICATIONS CTX 310 ecoline V1/V3 New Design Working capacity Max swing over bed: 330 mm Swing over cross-slide (X): 260 mm Max turning diameter: Ø 200 mm Chuck diameter: Ø 210 mm X-axis travel: 182.5 mm Z-axis travel: 455 mm Centre height: 190 mm Centre distance: 581 mm Feed drives Rapid traverse X and Z axes: 30 m/min Control: Siemens Sinumerik 840D Slim Line C axis with Siemens control Speed: 0 – 100 rpm Torque: 112 Nm Accuracy: < 0.04° Spindle Spindle nose: 140 h5 mm Front bearing diameter: 100 mm Spindle bore: Ø 74.3 mm Max bar capacity: 51 mm Main drive with Siemens control Drive power (40% / 100% duty cycle): 16.5 / 11 kW Torque (40% / 100% duty cycle): 166.5 / 112 Nm Max speed: 5,000 rpm Turret Number of tool stations: 12 Tool interface: DIN69880 (VDI 3425) Disc diameter: 30 mm Change time (with locking): 0.95 sec Change time (without locking): 0.4 sec Tool turret with Siemens control Number of driven tools: 12 Drive power (40% duty cycle) at 4000 rpm: 8.4 kW Torque (40%): 20 Nm Max speed: 4,500 rpm Tailstock Automatic travel: 396 mm Quill bore: flange Max quill force: 400 daN Hydraulic unit Tank capacity: 50 L Max pressure: 50 bar Fgedpfow T Sqyjx Aabsh Coolant system Tank capacity: 175 L Capacity with conveyor: 200 L Pump power: 0.85 kW Pump flow rate at 5 bar: 30 L/min Electrical connection Max power: 21 kVA Current: 400V Frequency: 50-60Hz Fuses: 33A Pneumatics Compressed air connection: 6 bar Environmental conditions Room temperature: +15 to +35°C Max humidity: 75% All information is provided without obligation and subject to possible errors or omissions.

Year of construction: 1983, condition: ready for operation (used), machine/vehicle number: 2810-3076, table mounting size: movement x: 560 mm movement y: 450 mm movement z: 450 mm tailstock stroke: 80 mm spindle taper:SK 40 spindle turning speed range: 40 - 4000 rpm Fjdpjfnry Hsfx Aabegh carriages continuously adjustable: 2 - 2000 mm/min rapid move: 4 m/min space needed: 2000 x 2150 x 2030 mm weight: 2720 kg

Condition: excellent (used), Year of construction: 2020, operating hours: 4,800 h, functionality: fully functional, machine/vehicle number: NL154200702, Manufacturing origin: JP Voltage: 380 V / 50 Hz / 3-phase Net weight: 5,400 kg Customs tariff number: 8458.9100 TECHNICAL DATA Maximum turning diameter: 350 mm Turning length: 515 mm CNC control: M730UM MAPPS Celos Swing over bed: 923.8 mm Swing diameter above carriage: 755 mm Standard turning diameter: 260 mm Bar capacity: 34 mm Main spindle: Spindle speed range: 100 – 8,000 rpm Spindle motor power: 11 / 7.5 kW C-axis resolution: 0.001° Chuck diameter: 210 mm Subspindle: Maximum speed: 8,000 rpm Spindle nose: A2-5 Axis travels: X-axis travel: 260 mm Z-axis travel: 580 mm Y-axis travel: 100 mm (±50 mm) Turret: Number of turret stations: 20 Driven stations: 20 Tool shank diameter: 25 mm Maximum driven tool speed: 10,000 rpm Driven tool motor power: 5.5 / 3.7 kW Fgsdpfx Ajw T Sn Eoabjh Feed rates: Rapid traverse X-axis: 30 m/min Rapid traverse Z-axis: 30 m/min Rapid traverse subspindle: 30 m/min Rapid traverse Y-axis: 10 m/min Rapid traverse C-axis: 400 rpm Total power requirement: 31 kVA Approximate machine weight: 5.4 t Approximate machine dimensions: 4.0 x 3.0 x 3.2 m Errors and omissions excepted – data provided without obligation.

Year of construction: 1990, condition: used, machine/vehicle number: 90030003, table size: 500 x 1200 mm movement x: 1000 mm movement y: 550 mm movement z: 600 mm Fgodpfx Aj Npwfsabsh spindle taper: ISO 40 spindle turning speed range: 60 - 2700 rpm spindle drive: 10 kW electrical connection: 380 V, 20 kVA kW space needed: 3200 x 2800 x 2650 mm weight: 7,3 t

Year of construction: 1987, condition: used, machine/vehicle number: 63658, movement x: 600 mm movement y: 400 mm movement z: 400 mm spindle taper: ISO 40 spindle turning speed range: 80 - 4000 rpm carriages continuously adjustable: 0,1 - 1500 mm/min rapid move: x u. y/z 4/2,5 m/min electrical connection: 380 V, 16 kVA kW space needed: 2450 x 2200 x 1900 mm Fodobv Haaopfx Aabsgh weight: 2250 kg

Year of construction: 1987, condition: used, machine/vehicle number: 152.41.74.002, table mounting size: 500 x 1000 mm movement x: 630 mm movement y: 500 mm movement z: 460 mm Fedpfxo H I Hdo Aabjgh tailstock stroke: von Hand 45 mm spindle taper: ISA 40 spindle turning speed range: 31,5 - 3150 rpm carriages continuously adjustable: 1 - 3000 mm/min rapid move: x/y 6 / z 4 m/min electrical connection: 380 V, 6/8 kW space needed: 1800 x 2120/2600 x 2020 mm weight: 3100 kg control: HEIDENHAIN, TNC 155

Year of construction: 1988, condition: used, machine/vehicle number: 82053, table mounting size: 600 x 1100 mm movement x: 800 mm movement y: 450 mm Fgodpfexnp Dex Aaboh movement z: 500 mm tailstock stroke: von Hand ca. 50 mm spindle turning speed range: 63 - 3150 rpm carriages continuously adjustable: 0,1 - 1500 mm/min rapid move: x/y/z 4,5/2,6/3 m/min electrical connection: 380 V, 5,5 kW space needed: 3000 x 2500 x 2030 mm weight: ca. 4000 kg control 432 with graphic