Used Grinding Mill for sale (4,015)

Condition: used, Year of construction: 1997, Catalogue number 7724 TECHNICAL DATA - number of working spindles: 6 pcs - spindles pressed pneumatically onto the material - milling units adjustable up/down, right/left, and at angles - 6 pneumatic clamps Nedpfxjw Rv Ahs Aa Ajdd - stepless feed speed adjustment - max milling height: 130mm - max milling length: 2500mm - max milling width: 330mm - shaft diameter: 40mm Motor power: - milling units 1-2: 2 × 5.5kW - milling units 3-4: 2 × 4.5kW - milling units 5-6 universal (sanding or milling): 2 × 4.5kW - extraction nozzle diameter: 10x152mm - air supply requirement: 6-8 bar - dimensions (L/W/H): 8000x3000x2420mm - weight: approx. 6000kg ADVANTAGES – Italian manufacture – For through-feed processing of curved elements according to template – 6 milling units – Not repainted – Safety guards – Original DTR + CE documentation – Used machine in very good condition Net price: 46,900 PLN Net price: 11,160 EUR (based on 4.2 EUR exchange rate) (Prices may change depending on exchange rate fluctuations)

Condition: good (used), Year of construction: 1996, functionality: fully functional, grinding length: 1,200 mm, grinding width: 450 mm, Internal item no.: 25085 Surface grinding machine Rosa Linea Iron 12.6 Year of manufacture: 1996 + Magnetic chuck 1200 x 500 mm + Borazon grinding wheel (mounted) Nedpfxjxtn Dno Aa Asdd Max. grinding wheel size: 400x60x127 mm Grinding length: approx. 1250 mm Grinding width: approx. 550 mm Max. distance from grinding wheel to magnet: approx. 400 mm Dimensions (LxWxH): 4000 x 2300 x 2400 mm Weight: 5800 kg

Condition: used, Year of construction: 2007, turning speeds 2800 U/min drill diameter 2 - 40 mm drilling length 200 mm lip angle 40 - 180 ° total power requirement 0,76 kW weight of the machine ca. 170 kg dimensions of the machine ca. 850 x 850 x 1200 mm Equipment: - Chuck - Coolant device - Machine light Nsdpfsvdxz Asx Aa Ajdd - Operating instructions

Condition: used, Year of construction: 2009, BOVONE ELB 10/45 – Year 2009 Straight Line Edging Machine Variable angle SPEED [m/min]: 0.35 - 5.4 ARRIS WIDTH [mm]: 5 MITER ANGLE: 0°÷45° MINIMUM SIZE [mm]: up to 12mm – 65 x 65, 85 x 85, 105 x 105 Nedpfx Aasxuppbo Aodd from 12mm to 30mm – 80 x 80, 100 x 100, 150 x 150, 90 x 200 THICKNESS [mm]: 3-30 ELECTRICAL POWER: 400V 50Hz 31kW 72A DIMENSIONS LxWxH [mm]: 8400 x 1250 x 2900 Backrest extension WEIGHT [Kg]: 4800

Condition: used, Year of construction: 1991, Technical details: grinding length: 600 mm grinding width: 375 mm workpiece height: 375 mm max. table load: 300 kg grinding range: 350 - 600 mm Table dimensions: 900 - 350 mm magnetic plate size: 600 x 350 mm dimensions of grinding wheel: 300 x 50 x76,2 mm mm total power requirement: 12 kW weight of the machine ca.: 5,2 t dimension machine xH: 3,3 x 2,6 x 2,4 m dimension coolant device LxWxH: 0,8 x 0,8 x 0,8 m -Longitudinal table stroke = 700mm -transverse travel of table = 800mm Coolant pump Ndodpfx Aajxu D Hue Aed *

Condition: good (used), Iseli EBW flank grinder Ndodpfxed Ncg Aj Aa Aod

Condition: good (used), Year of construction: 2001, functionality: fully functional, CNC Precision Grinding Machine Spiral Bevel Gear Grinding Machine Klingelnberg Oerlikon B10 Year of manufacture: 2001 CNC Control: SIEMENS Technical Specifications Grinding wheel diameter: approx. 100–200 mm Workpiece length: up to approx. 200 mm CNC axes: 3–5 axes, depending on configuration Control system: Siemens 840D or equivalent Drive power: approx. 5–10 kW (grinding spindle) Coolant tank: approx. 100–200 liters, with filtration unit Repeatability: within a few microns Special Features • Versatile use for various tool types and geometries • High flexibility through CNC programming and adaptable clamping devices • Process reliability due to integrated cooling and filtration system • Easy maintenance thanks to modular design and centralized supply units EQUIPPED WITH: COOLANT FILTRATION SYSTEM Njdpfxsw Hda Us Aa Aedd

Condition: good (used), Year of construction: 2006, Internal item no.: 25061 Adjustable wet grinding machine Njdpfx Aoxcttysa Aodd Knopp Rundomat - N Year of manufacture: 2006 Belt size: 120 x 3000 mm Workpiece lengths: 120 - 1000 mm Includes various grinding belts, support rules, etc. Dimensions (LxWxH): 170 x 150 x 190 cm Weight: approx. 500 kg The machine is fully functional but shows significant contamination.

Year of construction: 2008, condition: ready for operation (used), General Data Machine weight 12000 kg Movement X-Axis Movement 450 mm Z-Axis Movement 850 mm Ndjdpfx Aajxvt Ane Aed This STUDER S242 was manufactured in 2008, a cylindrical grinding machine known for its robustness and precision. It features a swing diameter of 180 mm, max workpiece weight of 20 kg, and grinding spindle speeds up to 50 m/s. The machine includes shaft automation, grinding wheels, and is still powered up and fully functional. Annual maintenance by Studer ensures reliability. For more information about this machine, please reach out to us. Application Types Grinding

Condition: ready for operation (used), Year of construction: 1988, Horizontal surface grinding machine Okamoto Model PSG 63 – UAN Year of manufacture 1988 Grinding length 600 mm Grinding width 320 mm Maximum workpiece height 500 mm Table longitudinal travel 750 mm Table cross travel 340 mm Grinding wheel diameter 350 mm Grinding wheel width 40 mm Spindle speed 1,500 rpm Rapid vertical traverse 400 mm/min Power 3.7 kW Automatic feed Magnetic chuck Coolant system Weight 2,500 kg Price: €2,500 plus VAT, ex-site Nsdpfx Aajxy N Hqj Aedd

Condition: used, Year of construction: 1973, Technical details: grinding length: 400 mm grinding width: 200 mm workpiece height: 300 mm dimensions of grinding wheel: 275 - 315 mm Nsdpfx Aaexu Dv Ao Aedd magnetic plate size: 400 x 200 mm max. table load: 200 kg weight of the machine ca.: 1,6 t dimension machine xH: 1,55 x 1,45 x 2,20 m

Condition: used, Year of construction: 1994, Control system, manuf. ECS, type Rosa System, 3 axes (Y/Z/U), touch sensing, electronic grinding wheel balancing unit, dressing device, magnetic clamping plate, 1,000 x 500 mm, workbench, 2,000 x 750 mm, contents: accessories, setup tools, clamping devices, lifting tools Nedpfxoxug Hqe Aa Ajdd

Condition: refurbished (used), Year of construction: 2025, operating hours: 36 h, functionality: fully functional, machine/vehicle number: 1024-54, Country of Manufacture: Switzerland Voltage: 380/50/3 Net weight: approx. 1600 kg Customs tariff: 8460.2920 Dimensions: 235 x 155 x 145 cm TECHNICAL FEATURES: MAIN DIMENSIONS: Centre height: 100 mm Distance between centres: 400 mm LONGITUDINAL SLIDE: Max travel: 420 mm Minimum automatic travel: 1 mm Table feed speed: 100–3500 mm/min Overtravel delay: 0–5 sec. Maximum table swivel (400/650 mm): 30°/15° CROSS SLIDE: Max travel: 170 mm Rapid traverse: 30 mm Plunge depth (diameter): 1.9 mm Feed rate 1: 0.03–1.5 mm/min Feed rate 2: 0.02–0.3 mm/min Plunge feed per impulse: 0.0005–0.025 mm WHEELHEAD: Grinding wheel (diameter x width x bore): 350 x 32 x 127 mm Drive power: 3 kW Njdpfx Aaew T Sc No Aodd Peripheral speed: 30 m/s Spindle speeds: 1600/1975/2200 rpm Manual stroke: 120 mm Swivel to right: 15°/30° Optional wheel guard for wheel set max width: 50 mm WORKHEAD: Swivel range: 0°–90° Spindle speeds: 80/175/380/800 rpm Internal taper: Morse 4 Collet type: W-20 Drive power: 0.5 kW Maximum workpiece weight: 20 kg Load for in-the-air grinding: 12 Nm Optional stepless drive speed range I: 30–300 rpm Optional stepless drive speed range II: 120–1200 rpm TAILSTOCK: Internal taper: Morse 2 Quill travel: 20 mm GUARANTEED WORKING ACCURACY: Generator straightness: Between centres: 400 mm Measured over 400 mm: 0.002 mm Between centres: 650 mm Measured over 650 mm: 0.003 mm Roundness accuracy for in-the-air grinding: 0.0004 mm CONNECTION VALUES: Power consumption: max. 8 kVA Permissible voltage variation: –15% / +10% Permissible frequency variation: ±3% Compressed air: 5 bar All technical specifications are given without obligation and subject to errors or omissions.

Condition: used, Year of construction: 1992, Internal item no.: 25086 Surface Grinding Machine Zirsch & Baltrusch Formmaster 6/30 + Magnetic clamping plate 600x300 mm Attention! The grinding spindle is noticeably louder and should probably be replaced in the near future. See video! Technical Data: Maximum grinding area: 650 x 300 mm Electromechanical cross feed: 300 mm Maximum table load: 300 kg Table clamping surface: 650 x 250 mm Maximum distance from table surface to spindle center: 600 mm Grinding wheel dimensions: 400 x 40 mm Travel X: 840 mm / Y: 310 mm Automatic infeed in Z Connected load: 8 kW Installation dimensions (LxWxH): 3500 x 2000 x 2500 mm Weight: approx. 3000 kg Ndedsxtn R Iopfx Aa Aed

Year of construction: 2002, condition: ready for operation (used), General Data Measurements depth 3340 mm Measurements width 1960 Nodpfxexulfxs Aa Ajdd Measurements height 2050 mm Machine weight 5000 kg Control Unit Brand FANUC Model Series 21i-T This JUNKER EJ 29 CNC was manufactured in 2002. A robust cylindrical grinding machine, it features a grinding wheel diameter of 400 mm, motor power of 4.5 kW, and spindle speeds up to 1000 rpm. It can handle grinding lengths up to 600 mm and diameters up to 280 mm. Control is managed via a GE Fanuc Series 21i-T unit. Consider the opportunity to buy this JUNKER EJ 29 CNC cylindrical grinding machine. Contact us for more information. Application Types Grinding

Condition: ready for operation (used), Year of construction: 2000, Immediately available ex location: Horizontal Surface Grinding Machine ABA Type ECOLINE L 1006 Year of manufacture: 2000 Control: Abamatic – 1 Operator Table: 1000 x 600 mm Table load capacity: 1000 kg Grinding length: 1000 mm Grinding width: 700 mm Installation height: 700 mm Grinding wheel: 400 x 100 x 127 mm Grinding wheel speed steplessly adjustable up to 2600 rpm Ndjdoxy N Hdepfx Aa Ajd Drive power: 11 kW Grinding wheel speed steplessly adjustable up to 2600 rpm Feed rates, X axis: steplessly adjustable up to 10,000 mm/min Feed rates, Z axis: steplessly adjustable up to 10,000 mm/min Feed rates, Y axis: steplessly adjustable up to 10,000 mm/min Magnetic chuck Belt filter system Weight: 6 t Price: EUR 9,500 – plus VAT, ex foundation

Condition: ready for operation (used), Kellenberger cylindrical grinding machine spindle, used, in good condition! Nsdpfx Ajxwbd Aoa Aodd

Condition: new, Year of construction: 2024, functionality: fully functional, working dimensions 2000x1000mm Nsdpjvkpnmsfx Aa Aodd 2 charging drawers pneumatic shaking total power 1,5kW power supply 400V hinged wall

Year of construction: 2023, condition: new, ! Offers for customers from Baltic states only: Lithuania, Latvia, Estonia. - Mobile and compact setup - Standard with vacuum system 2.2 kW - Optional with 2 or 4 electromagnets - Equipped with 2 grinding heads Ndsdpjixz Hdjfx Aa Ajd - Bracket with double hand control (CE marking) - Workpiece width: max. 780 mm / length unlimited - Power consumption of machine: 400 V, 50 Hz, 10 A, 6 kW - Dimensions: 1435 x 1100 x 1510 mm (L x W x H)

Condition: ready for operation (used), Internal Item No.: 25055 Surface Grinding Machine Manufacturer: Jung Model: Not specified The machine comes from a school and was used for training purposes. + Magnetic chuck (400x150mm) + Feed in X direction pneumatically and mechanically Ndodpfx Aajw Ty H Aj Asd Mounted grinding wheel: D:165mm W:25mm Travel in X approx. 600mm (mechanically via handwheel) Dimensions (LxWxH): 190 x 140 x 210cm Weight: approx. 700kg

Condition: used, Year of construction: 1980, workpiece diameter 600 mm workpiece weight 400 kg workpiece height 300 mm total power requirement 35 kW weight of the machine ca. 4500 kg Ndedpfxst Abrwo Aa Aod

Condition: ready for operation (used), Year of construction: 1979, Immediately available ex location: Reform Knife Grinding Machine Type AR 18 Model 4 Year of manufacture: 1979 Grinding length: 1800 mm Grinding width: 400 mm Drive: 4.5 kW Magnet: 1800 x 400 mm, swiveling Weight: 4 t Nodjxy N E Topfx Aa Aodd Coolant system Price: EUR 5,500.— plus VAT, ex location.

Year of construction: 2008, condition: used, “Alan Richardson” automatic pipe polishing machines can also be used for grinding, removing dirt, oxidation, rusting. The machine is in good used condition, fully working. Can be tested. Specification: Model: Alan Richardson Njdpsph T N Sjfx Aa Ajdd Made in: England Year: 2008 Pipe length up to: 1700 mm Documentation: included Place: Marijampole, Lithuania If you have more questions, we will be happy to answer them.

Condition: good (used), Internal Item No.: 25080 No VAT can be shown, as the item is subject to differential taxation. Internal cylindrical grinding machine Overbeck 250i + Operating manual + Three-jaw chuck (workpiece holder) + Collet set (workpiece holder) Technical data: Nsdjxtndbspfx Aa Aodd Max. clamping diameter of workpiece: 140mm Max. clamping length of workpiece (in front of spindle flange): 250mm Grindable bore length: 160mm Grindable bore diameter: 0.8–90mm Max. workpiece weight: 15kg Swing diameter under guard: 150mm Workpiece spindle speed (stepless): 112–1000 rpm Swivel range of workpiece spindle headstock: 45° Internal taper of workpiece spindle: MT4 Spindle bore: 26mm Grinding spindle speed range: 6,000–175,000 rpm Incremental infeed: 0.001–0.01 mm Power requirement: 7.3 KVA Space required: 2.8 x 2.5m Weight: 1,750kg The machine comes from a training workshop in a rehabilitation clinic, and is in very well-maintained condition.

Condition: good (used), Internal item no.: 25087 Cylindrical grinding machine Ndedpfxoxtpbbo Aa Aed Schaudt AR 500 + Magnetic chuck D160mm + Internal grinding attachment! Grinding length: max. 500mm Grinding diameter: max. 300mm Centre height: 150mm Centre distance: 500mm Tailstock taper: MK4 Machine dimensions (LxWxH): 2700 x 2000 x 1800mm Weight: approx. 2000kg