Used Grinding Mill for sale (13,311)

Condition: good (used), Year of construction: 1990, Ref. -No.: 10301 Manufacturer: TITAN Type: RU 350 x 1-1500 Year of construction: 1990 Type of control: Konventionell Nodpsycpv Sjfx Alhscu Storage location: Halberstadt Country of origin: USA Max. Grinding length: 1.500 mm Max. Workpiece Weight: 300 kg Grinding Diameter: 350 mm Max. Dia. Of Grinding Wheel: 280-500 mm Grinding Wheel Width: 80-100 mm

Condition: ready for operation (used), functionality: fully functional, Internal article number: 26068 Surface grinding machine ABA FF350 / 22 + Magnetic clamping plate (350 x 150) + Digital display on the Y-axis + Surfacing device + 3 grinding wheel flanges Grinding length: 350 mm Grinding width: 225 mm Workpiece height: max. 315 mm Table size: 350 x 150 mm Table longitudinal travel: 400 mm Table feed rate: 3-22 mm/min Total power consumption: 2.75 kW Dimensions (L x W x H): 190 x 190 x 185 cm (measured including the control cabinet + unit and coolant tank) Weight: approx. 800 kg The machine comes from an educational institution and is in good condition. Njdpjzhadvefx Alhscu You are welcome to inspect the machine while it is powered on, in our heated storage area of over 500 m².

Condition: used, Year of construction: 1981, Used machine Year of manufacture: 1981 Equipment and technical data: - with dual-lift spindle, pneumatic - mandrel diameter: 40 mm Ncjdpfxjwka E Uj Alheu - with large table length: 2500 mm - with extendable frame support - with milling fence featuring Panhans metal jaws and fine adjustment Availability: short-term Location: Röllbach

Year of construction: 2005, condition: used, Used machine Year of manufacture: 2005 Equipment and technical data: - Log house milling machine BL100A - four-head unit - For producing chalet corner joints by milling on four sides of the log plank in a single clamping, using 2 × vertical and 2 × horizontal milling spindles - Processing dimensions: 140 × 200 mm - Milling spindles: Ø 30 mm - Cutter: max. 4 × 220 × 100 mm - Motor power: 4 × 3.0 kW - Speed: 4,200 rpm - Feed: hydropneumatic, steplessly adjustable, with rapid traverse Nedpsyxyanjfx Alhocu - Operation: two-hand activation / via PLC control - Milling depth adjustment: spindle, digital counter - Workpiece clamping device: 2 × vertical, pneumatic - Extraction: underfloor funnel, Ø 160 mm - Equipment: complete with electrical system, PLC control, and pneumatics - Machine base: prepared for end groove unit, drilling device, and cross-cut saw - Machine enclosure: closed design, hinged safety cover (gas spring) with viewing window - Control cabinet: on pedestal with 3.0 m cable sleeve - Delivery condition: ready for operation, without tools - Horizontal clamps in machine table: 2 units - Activation: pneumatic, front-mounted - Clamping cycle: automatic via PLC control - End groove unit integrated - Milling spindle: Ø 30 mm - Cutter: max. 180 × 40 mm - Motor power: 3.0 kW - Speed: 4,200 rpm - Feed: hydropneumatic, steplessly adjustable, with rapid traverse - Height adjustment: spindle, digital counter - Workpiece clamping device: 1 × additional vertical, pneumatic - Equipment: integrated, with electrical system and pneumatics, without cutters - Horizontal drilling device integrated, with drill guide and chip guard - Drill diameter: max. 30 mm - Motor power: 1.1 kW - Speed: 1,500 rpm - Feed: pneumatically, steplessly adjustable, with rapid traverse for idle stroke - Height adjustment: spindle, digital counter - Workpiece clamping device: 1 × additional vertical, pneumatic - Equipment: integrated, with electrical system and pneumatics, incl. Ø 20 mm drill bit - Under-table cross-cut circular saw integrated (automatic mode only) - Maximum cutting dimensions: 200 × 140 mm (W × H) - Saw blade diameter: 500 mm - Motor power: 4.0 kW - Cutting speed: 86 m/s - Feed: pneumatic - Workpiece clamping device: pneumatic - Extraction: suction funnel Ø 120 mm - Equipment: integrated, with electrical system and pneumatics, incl. saw blade - Prepared for automatic operation - Sliding table: mechanics, pneumatics, and electrics for end groove mill - Interface: electric, for actuation via external Tigerstop control - Infeed table length: 9,000 mm - Outfeed table length: 4,000 mm Availability: short notice Location: Röllbach

Condition: used, Year of construction: 2003, Used machine Year of manufacture: 2003 Features and technical data: - Automatic spindle height and tilt adjustment with decimal increments - Mechanical display for spindle height and electronic display for spindle tilt - Tilting hood with aluminum guides - Adjustable table opening via table slides - System for quick tool change - With long tables featuring extendable workpiece support - Table size: 2500 x 780 mm - Spindle adjustment: -45° to +45° - Spindle diameter: 30 mm - Spindle stroke: 230 mm - Maximum table opening: 300 mm - Motor: 5.5 kW with automatic star-delta start - With forward/reverse rotation - Speeds: 3000/4500/6000/8000/10000 rpm Ncedpfxew I H Rqe Alheu - Electronic programming of spindle height, spindle tilt, and fence position (milling fence) - Extraction ports above and below 120 mm Dimensions: 2570 x 1450 mm Weight: approx. 670 kg Availability: short notice Location: Röllbach

Condition: used, Used machine Equipment and technical data: - Heavy cast iron construction - Motor: 5.5 kW - Spindle diameter: 30 mm - 2900-4400-6000-7800-10000 rpm - Height and tilt adjustment: electric motor drive - Fine adjustment: via handwheel Ncedpfxey R Hafe Alhou - Equipped with Panhans metal fence jaws - With Holz-Her 3-roller power feed unit Availability: short-term Storage location: 63934 Röllbach

Condition: used, Year of construction: 1994, Used machine Year of manufacture: 1994 Features and technical data: Nedpjxllw Aefx Alhocu - Cast iron table, surface ground and hardened - Spindle adjustment via handwheel and scale on the front side - 4 speeds with electronic speed display - External spindle lock - Milling fence with fine adjustment on both sides + central adjustment - Motor brake - Extraction ports top and bottom - Spindle: 30 mm - Motor: 4 kW - Table dimensions: 1100 x 700 mm - Spindle speeds: 2900/4400/6000/8000 rpm - Vertical spindle adjustment: 220 mm - Table opening: 300 mm - Usable spindle length: 1890 mm - Extraction ports: 150/120 mm - With 4-roller power feed unit Weight: 600 kg Availability: short-term Location: Röllbach

Condition: used, Year of construction: 1996, Used machine Year of manufacture: 1996 Equipment and technical specifications: - The basic principle of Hofmann machines is the proven cast iron construction - Gray cast iron is by far the leader in vibration damping, compressive strength, and load capacity - Milling arbor 30 mm with right and left rotation - Milling fence with stop jaws, central adjustment, and fine adjustment of one jaw - Manual height adjustment with digital display and zero-reset button - Table size: 1200 x 820 mm - Table height: 890 mm - Motor power: 5.0 / 6.2 kW - Spindle speeds: 3000/4000/5000/6000/8000/10000 rpm - Height adjustment: 125 mm - Chip extraction ports: 110/120 mm - With Holz Her 2-roller feed unit Ncjdpswwxzhefx Alhou Weight: 850 kg Availability: by arrangement Location: 63934 Röllbach

Condition: used, Year of construction: 1993, Used machine Year of manufacture: 1993 Equipment and technical data: - Fixed milling spindle; newly fitted bearings - with table extension and extendable frame support 2500 mm - Motor 5.5 kW - Speeds 3000/4500/6000/8000/10000 rpm - Milling fence with 2 adjustment options: - complete fence - rear take-off jaws Nedow I Uinepfx Alhocu - Extraction hoods: 2 x 120 mm - Automatic motor brake - Right/left rotation - with Haffner power feed with 4 rollers Weight approx. 700 kg Availability: by arrangement Location: Flörsheim

Condition: used, Year of construction: 1963, Stationary milling machine Year of manufacture: 1963 Ncodpfewka R Rsx Alhju Spindle diameter: 30 mm Availability: short notice Storage location: Röllbach

Condition: used, Used machine Equipment and technical data: - Table size: 800 x 1000 mm - Diameter of table opening: 480/380/170/125 mm - Taper of milling spindle: MK 5 - Spindle speed: 3000 + 4500 + 6000 + 9000 rpm - Height adjustment range of spindle: 150 mm - Distance from spindle center to front edge of table: 400 mm - Maximum permitted tool diameter: 250 mm Ncodpeyq T Ihjfx Alheu - with wooden fence jaws (can be exchanged for metal fence jaws upon request) - with Holz Her 3-roller feed unit - with heavy-duty sliding table; runs on ball bearings on precisely milled, parallel guideways Weight: approx. 800 kg Availability: short-term Location: 63934 Röllbach

Condition: used, Year of construction: 1986, Used machine Year of manufacture: 1986 Features and technical data: Motor: 4 kW Speeds: 3000 / 4500 / 6000 / 8000 / 10000 rpm Spindle height adjustment via handwheel Installation dimensions: 1200x80x1350 mm Fence jaws made of wood Incl. Holz Her 3-roller feed unit incl. stand Nodpfx Aljxllxaehjcu With chassis Availability: short-term Location: Röllbach

Condition: used, Year of construction: 1984, Used machine Year of manufacture: 2007 Equipment and technical data: - Motor 4.7/5.7 kW, with pole-changing capability - With right/left rotation - Milling arbor MK 5 / 30 mm - Height adjustment via handwheel - Speeds 3000/4500/6000/9000 rpm - Milling stop with metal jaws, mounted on a round indexing plate and thus rotatable by 360° - With table extension on both sides with extendable frame support - With mounted roller table on the left side Attention! The table extension was mounted later! To use the roller table, it must be removed! Ncsdpfx Ajy R Halolheu - With 4-roller feed unit, year of manufacture 2007 - Dimensions: 240x65x120 - Weight approx. 900 kg Availability: short-term Location: 63934 Röllbach

Condition: used, Year of construction: 1999, Used machine Year of manufacture: 1999 Features and technical data: - with tilting spindle: 0° - 45° - with aluminium sliding table - Table size: 1100 x 620 mm - Working height: 880 mm - Sliding table dimensions: 900 x 200 mm Ncjdpfxjy Si Aro Alheu - Sliding table travel: 900 mm - Spindle diameter: 30 mm - Spindle stroke: 150 mm - Speeds: 3100/4600/6200/8000 rpm - Motor: 4 kW - with 4-roller power feeder - Dimensions: 1200 x 1000 x 1400 mm - Weight: approx. 490 kg Availability: short-term Location: 63934 Röllbach

Condition: used, Used machine Equipment and technical data: - Vertical spindle travel: 150 mm - Spindle diameter: 30 mm - Spindle speeds: 3,500 - 7,000 rpm - With fixed spindle - Motor: 2.5–3.1 HP - Table: 830 x 700 mm Nodjy Dkgpspfx Alhjcu - Slotting cutters up to 340 mm - With metal-jaw milling fence (Note: The Aigner parallel fence shown in the photos is not included in the scope of delivery!) - With 3-roller feed Weight: 240 kg Availability: short-term Location: Röllbach

Condition: used, Year of construction: 2023, Used machine Year of manufacture: 2023 Condition: as new, machine is unused Equipment and technical specifications: - Spindle speeds: 3,500 / 6,000 / 8,000 / 10,000 rpm Njdpew E Tzrjfx Alhecu - Milling spindle tilt: 0 to -45° - Usable spindle length: 125 mm - Spindle arbor diameter: 30 mm - Speed display: LED indicator on the machine front - Max. tool diameter (standard): 240 mm - Max. lowerable tool diameter: 230 mm - Max. tool diameter for profile milling: 240 mm - Max. tool diameter for tenoning: 320 mm - Working table length: 1,200 mm - Working table width: 530 mm - Table height: 900 mm - Sliding table length: 1,200 mm - Sliding table width: 360 mm - Sliding table height: 142 mm - Extraction port diameter: 2 × 120 mm - Main drive motor power: 5.0 kW - Connection voltage: 400 V - Mains frequency: 50 Hz Dimensions: 1,200 × 2,000 mm Weight: 510 kg Availability: short-term Location: Saxony-Anhalt

Condition: used, Year of construction: 2010, operating hours: 38,353 h, machine/vehicle number: MC54G-16201060AKA, Travel ranges (X/Y/Z): 3,200/2,100/920 mm, max. spindle speed: 6,000 rpm, tool holder: SK50, chip conveyor, control system: HURCO Winmax, 40-position tool changer, cooling unit: HABOR, coolant: R407C. Nodezha Etopfx Alhocu

Condition: good (used), functionality: fully functional, travel distance X-axis: 500 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, Heidenhain TNC 310 cnc control C and B-axis manual with display swivel rotary table electronical hand wheel coolant device Technische Daten: Längsweg (X-Achse) / X-travel longitudinal 500 mm Querweg (Y-Achse) / Y-travel cross 400 mm Senkrechtweg (Z-Achse) / Z-travel vertical 400 mm Werkzeugaufnahme / spindle taper SK40 Drehzahlbereich / spindle speed range 20-4500 UpM Vorschub / feed 5000 mm/min. Gewicht ca. / weight ca. 2800 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding. Nsdjy E Iztspfx Alhjcu

Condition: used, Year of construction: 1984, machine/vehicle number: 2804-1181, travel distance X-axis: 500 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, table width: 450 mm, table length: 700 mm, rotational speed (max.): 3,150 rpm, rotational speed (min.): 32 rpm, Used DECKEL tool milling machine model FP 3A CNC Table size: 700x450mm, spindle taper SK40 DIN 2080, Travel paths: X/Y/Z = 500/400/400mm, spindle speeds from 31.5 to 3150 rpm (21 working spindle speeds), feed rate 5-1250mm/min, rapid traverse in X, Y and Z 2500mm/min, coolant system and machine feet. Year of manufacture: 1984; the machine was overhauled by Harich in 2010. The machine is located at our site in 71334 Waiblingen-Beinstein and can of course be inspected. Please contact us. Njdpjyrnvvofx Alhjcu

Condition: used, Year of construction: 2022, x-travel 5.230 mm y-travel 2.750 mm z-travel 1.100 mm control Heidenhain TNC 640 Tool bore DIN69871 A50 BIG PLUS main drive 32/43 kW torque S1/S6-60% 752/1.011 Nm Nsdpfszgxgmsx Alhocu speeds Spindel stufenlos 6.000 U/min ca. 70 kw weight of the machine ca. ca. 43 t Installation dimensions (length x width x height) ca. 12,2 x 5,7 x 5,1 m

Condition: used, Year of construction: 2017, x-travel 800 mm y-travel 500 mm Njdszgxggjpfx Alhecu z-travel 600 mm control Fanuc Series Oi-MF spindle tunring speed 15.000 U/min table-size 800x560 mm gleichmäßig verteilt bis zu 600 kg tool taper SK40 tool changer: 32-fach output 35 KVA weight of the machine ca. ca.11t + Wechsler ca.8t

Condition: used, Year of construction: 2015, x-travel 1200 mm y-travel 600 mm Ncedpfxjzgxgas Alhsu z-travel 600 mm control Dahlih-FANUC Solution C spindle tunring speed 15.000 U/min tool changer: 40-fach tool taper SK40 table-size 1.300 x 640 mm output 35 KVA weight of the machine ca. ca. 7.500 kg

Year of construction: 2016, operating hours: 16,568 h, condition: used, machine/vehicle number: 84037, Travel ranges (X/Y/Z): 800x500x400 mm, weight: 5,300 kg, with magnetic clamping plate, approximately 80x40 cm. Nodpfx Alezhaz Ishocu

Condition: used, machine/vehicle number: 14084, 14085, 14086, Rotor diameter: 180 mm Rotor width: 180 mm Rotor knives: 18 Stator knives: 2 Nedpfx Aszg Rb Aslhecu Feed opening approx. 180 x 180 mm Drive motor: 3 kW

Condition: used, Year of construction: 1998, machine/vehicle number: ECO6828/60-01, Machine control ASYST MS 400-, grinding wheel diameter 250 mm, max. grinding length approx. 1000 mm, with coolant device, fleece filter system and extraction unit. Ncedpfey Sqh Aox Alhou