Used Gws 25 230 for sale (19,710)

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, turning diameter over cross slide: 350 mm, turning diameter: 550 mm, spindle bore: 66 mm, spindle motor power: 15 W, chuck outer diameter: 201 mm, bar diameter (max.): 66 mm, collet bore: 66 mm, controller manufacturer: Fanuc, controller model: Fanuc 21i-T, Equipment: documentation/manual, TURRET POSITIONS: 12 Lredoygidkspfx Ab Uet PARTS CATCHER TAILSTOCK CHIP CONVEYOR

Condition: used, Year of construction: 1992, pressure 25 t throat 375 mm stroke 8 - 80 mm no. of strokes 120 Hub/min ram adjustment 45 mm table surface area 800 x 580 mm clamping plate 800 x 450 mm ram surface Platte 575 x 220 mm total power requirement 1,5 kW Lredpfxsykb Dkj Ab Ust weight of the machine ca. 2,5 t

Condition: used, mileage: 32,790 km, power: 92 kW (125.09 HP), first registration: 03/1958, fuel type: diesel, empty load weight: 5,670 kg, maximum load weight: 3,630 kg, overall weight: 9,300 kg, tire size: 8.25-20 EHD, axle configuration: 4x4, color: red, driver cabin: other, gearing type: mechanical, number of seats: 6, Year of construction: 1958, front tire size: 8.25-20 EHD, rear tire size: 8.25-20 EHD, Equipment: all wheel drive, Vehicle location: en route / in transit Klöckner H-Deutz ELF/TLF 16/25 A3500/6 Lredpsz D Un Eefx Ab Ust Year of manufacture: 1958 All information is provided without guarantee, as the vehicle is currently en route! Sales to commercial businesses or for export are subject to an additional 19% VAT. ACCESSORY INFORMATION IS PROVIDED WITHOUT GUARANTEE; subject to changes, prior sale, and errors!

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2021, operating hours: 3,269 h, load capacity: 2,500 kg, lifting height: 3,670 mm, fuel type: gas, mast type: telescopic, construction height: 2,480 mm, motor manufacturer: Doosan, fork length: 1,200 mm, tire condition: 80 %, front tire type: superelastic tires (black), front tire size: 23x9-10, rear tire type: superelastic tires (black), rear tire size: 21x8-9, overall weight: 4,113 kg, total height: 2,480 mm, total length: 2,650 mm, total width: 1,200 mm, fuel: liquid petroleum gas (LPG), motor model: PM02V, Equipment: sideshift, STILL RX 70-25 T – LPG forklifts TECHNICAL DATA Lifting capacity: 2.500 kg Lifting height: 3.670 mm Closed height: 2.480 mm Mast: Standard (2W367) Fork length: 1.200 mm Fork carriage: FEM 2A Drive: 4-Zyl. Treibgas Engine: Doosan PM02V Tyres: Superelastik 23x9-10 (80%) / 21x8-9 (50%) Service weight: 4.113 kg Length: 2.650 mm Width: 1.200 mm Year of manufacture: 2021 Operating hours: 3.269 h Condition: working condition EQUIPMENT 3rd valve, 4th valve, Rear work lights, Front work lights ATTACHMENTS Sideshift Internal no.: 1202041 Location: 14974 Ludwigsfelde bei Berlin Lsdpfx Aboz Aqgqj Uert Unilift GmbH & Co. KG – inspected used forklifts from Ludwigsfelde near Berlin.

Condition: used, functionality: fully functional, Year of construction: 2011, machine/vehicle number: 606411, cutting range flat at 90° (X-axis): 600 mm, cutting range flat at 90° (Y-axis): 15 mm, cutting range square steel at 90°: 50 mm, cutting range round steel at 90°: 55 mm, cutting range angle steel at 45° (X-axis): 80 mm, cutting range angle steel at 45° (Y-axis): 10 mm, cutting range angle steel at 90° (X-axis): 150 mm, cutting range angle steel at 90° (Y-axis): 18 mm, sheet thickness (max.): 13 mm, Equipment: foot remote control, We offer this used Kingsland Multi 125 shearing machine for profiled steel, manufactured in 2011. Lrsdsz D Tf Ajpfx Ab Uet Year of manufacture: 2011 Punching – dimensions: 35 × 25; 57 × 16; 30 × 20; 38 × 15 mm Bending capacity for flat bar: 250 × 22 mm Shearing of flat bar: 380 × 25; 600 × 15 mm Shearing of angle profile at 90°: 150 × 18 mm Shearing of angle profile at 45°: 80 × 10 mm Cutting of round bar: up to Ø 55 mm Cutting of square bar: 50 × 50 mm Cutting with extra blades: up to 200 mm Notching – rectangular: 60; 100 mm Notching with additional tools: 80; 90 mm Maximum material thickness: 13 mm If you have any further questions or require more information, please send us a message or call us.

Condition: good (used), functionality: fully functional, 2 Index MS 25 E machines in very good condition and fully functional – also available individually – for sale. Lodpjzicxljfx Ab Ujrt Inspection while the machines are powered on is possible.

Condition: excellent (used), Year of construction: 2004, machine/vehicle number: 87, functionality: fully functional, EBERL vacuum dryer, manufactured in 2004. Lrsdsy Uc I Hspfx Ab Ujt Underwent a major overhaul in 2024, performed by Eberl (purchased directly from Eberl). Fully operational, complete documentation available.

Condition: used, Year of construction: 2007, Working area: 2780 x 1140 mm (vertical milling) 2500 x 950 mm (horizontal drilling) X-Y travel: 2980 x 1271 mm Z-axis travel: 200 mm Passage height: 180 mm The structure of the base body is a monolithic construction made of thick-walled steel. It is stiffened by welded triangular plates across the entire machine bed, making it extremely stable. The triangular shape used for load-bearing parts, with a large base, is the secret to ensuring lasting precision and stability. The machine layout allows the user optimal workflow despite minimal space requirements. The base body constructed in this way therefore offers the machining unit a balanced and secure base with particularly good load distribution. The mobile unit carrier is made of a solid monoblock. It is positioned in the X direction on prismatically ground guides via recirculating ball slides. On this mobile unit carrier, the working unit is mounted on prismatic, ground guides and the recirculating ball slide. Description of the units and accessories (basic) Drilling unit: Drilling head with 10 + 4 spindles · 6 individually accessible vertical spindles in X · 4 individually accessible vertical spindles in Y · 2 horizontal spindles in X (1 + 1) · 2 horizontal spindles in Y (1 + 1) · Speed: 4,000 rpm · Power: 2.2 kW · Grid: 32 mm · Drill chuck: M 10 with 11 mm fitting · Extraction nozzle: D = 160 mm Vertical milling unit (position 2) · Tool chuck HSK 63F · Speed 1,500 - 24,000 rpm continuously adjustable via inverter · Motor power 4.4 kW (6 HP) from 12,000 rpm (S1) · Right-hand / left-hand rotation · Ceramic bearings · Scope of delivery: 4 tool chucks (right) without collet chuck · Tool changer · Side-mounted tool magazine 7-way (TR7) with full encapsulation to prevent chipping · 7 tool positions for HSK 63F tool holder arranged in a row · maximum tool diameter D=120 mm · maximum weight per holder 4.5 kg · maximum tool weight of all tools 20 kg (TR7) · angular gears can be accommodated Horizontal milling unit (position 1) Horizontal unit with two opposite outputs for milling and grooving. · Speed 9,000 - 18,000 rpm continuously variable via inverter · 1 output for collet 3-20 mm (ER 32) · 1 output for saw/collet 3-12 mm (ER20) (For saw D = 120 mm / bore 50 mm) · Motor power 3 kW (4 HP) · Max. tool diameter front milling: 20 mm · Max. tool length front milling: 110 mm · Max. tool diameter rear milling: 12 mm · Max. tool length rear milling: 80 mm · Max. saw blade diameter: 100 mm · Bore saw blade (ER 32): 50 mm · Mandrel diameter saw blade (ER 20): 12 mm Work table The work table is designed to guarantee the operator maximum freedom of movement. The vacuum quick clamping system ensures maximum flexibility with precise positioning and optimal grip of the workpieces. · 4 supports 900 mm continuously adjustable in X · 8 vacuum suction cups round D = 110 mm continuously adjustable in Y (2 per support) · 2 stops in X (1 x left / 1 x right) · 1 stop in Y per support (total 6) · The retractable reference stops are controlled via CNC. · Scope of delivery: 4 plug-on adapters for suction cups · Pendulum machining standard (2 working areas) Axis movement The drive system in X, Y and Z is carried out via ground ball screws of the highest precision class. The ball drive screw of the X-axis is located exactly in the center Lsdpfx Aex Twdyob Usrt

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, machine/vehicle number: 25/111/615/18, Cutting line for medium-sized wood Circular sawmill - minimum log diameter: 120mm - maximum log diameter: 400mm - minimum log length: 1500mm - maximum log length: 3200mm - feed rate: 7.5-24m/min Lredpjvdtzqofx Ab Ust - power of main motors: 75+90 kW - saw diameter 600mm WP210 multi saw - maximum cutting height: 210mm - minimum cutting height: 30 mm - maximum cutting width: 500 mm - minimum cutting length: 1500 mm - feeding speed: 5-25 m/min - power of main electric motors: 2x75 kW - diameter of saws 350mm The line includes: PK2200 log feeder Prism roller conveyor TT5/600/400 G caterpillar circular sawmill Control panel Roller table with a mechanism for dropping offsets and side boards Powered roller table 4m SB4000 base roller table WP210 multi-sawing machine Conveyor belt L=25000 More information available at the indicated e-mail address or by phone. Possibility of line presentation from Monday to Friday 08:00-16:00

Year of construction: 2019, condition: ready for operation (used), travel distance X-axis: 256 mm, number of axes: 2, Cylindrical grinding machine manufactured in 2019. This TOS HOSTIVAR UB 25-1000 features a maximum swing diameter of 280 mm and a distance between centres of 1,000 mm. It includes a grinding head swivel range of ±45° and a rapid traverse speed of 2,000 mm/min. If you are looking to get high-quality grinding capabilities, consider the TOS HOSTIVAR UB 25-1000 machine we have for sale. Contact us for further details. • Working capacity: • Maximum swing diameter: 280 mm • Distance between centres: 1,000 mm • Capacity with open steady rest: 70 mm Lsdpfx Aszwxmzsb Uort • Capacity with closed steady rest: 70 mm • Minimum machinable diameter with a worn Ø250 mm grinding wheel: 0 mm (applicable at a workpiece swing diameter of 250 mm) • Workhead and tailstock: • Workhead swivel range: 90° • Workhead spindle taper: Morse 4 (ISO 296-91) • Tailstock quill taper: Morse 4 (ISO 296-91) • Tailstock quill stroke: 25 mm • Tailstock centre transverse adjustment (cylindricity correction): ±0.08 mm • Tailstock clamping force: 360 N • Grinding wheel head: • Swivel range: ±45° • Total adjustment range: 270 mm • Rapid traverse travel: 0–270 mm • Rapid traverse speed: 2,000 mm/min • Infeed per handwheel revolution (relative to diameter): 0.1 mm • Minimum manual infeed (relative to diameter): 0.001 mm • Automatic working infeed range (relative to diameter): 0.001–270 mm • Grinding wheel: • Standard dimensions: Ø400 × 40 × Ø127 mm • Maximum wheel width: 40 mm • Axes: • X-axis travel: 256 mm

Condition: like new (used), functionality: fully functional, Year of construction: 1986, machine/vehicle number: 1519 - 5016GW, Equipment: CE marking, The conditions are mint! Fully refurbished and upgraded the complete filter in 2017. Including haze and color control from Optek and new dosing pump, all process connections GEA Varivent, Profibus interface, including the heat exchanger and pipe panels and so on. There isn+t a single old pipeline on it! Last 5 years the filter was running really low and was cleaned more than running production. Last operational 12.2024 Lrodpjw Ic A Nofx Ab Ujt

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, input frequency: 50 Hz, input voltage: 400 V, pressure: 6 bar, LiSEC, KSR-25, Right – Left, year 2010 Vertical Glass Edge Seaming Machine, h=2,50 m Vertical compact grinding machine for the seaming of glass sheets on all four sides in a fully automatic cycle. Inspection during production is possible by appointment. In very good working condition. Lsdpfxov Eguye Ab Uort Available: March / April 2025.

Condition: used, pressure 25 t throat 250 mm stroke 10 - 120 mm no. of strokes 120 Hub/min ram adjustment 45 mm Ljdeykb A Tjpfx Ab Uort total power requirement 1,5 kW weight of the machine ca. 1,95 t

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, machine/vehicle number: 1154, total height: 2,040 mm, total length: 2,200 mm, total width: 1,770 mm, type of input current: three-phase, table width: 400 mm, overall weight: 3,100 kg, table length: 600 mm, table height: 220 mm, empty load weight: 2,800 kg, table load: 450 kg, input voltage: 380 V, input frequency: 50 Hz, Equipment: documentation/manual, The Sodick AQ325L wire EDM machine was manufactured in 2002 by the Japanese company Sodic Co., Ltd. This is a precision CNC machine designed for cutting various shapes in conductive materials using the EDM (Wire Cut) method. This model combines a compact design with high machining accuracy, making it ideal for both single and serial production, especially for manufacturing parts with complex geometries. The machine offers a working area capable of machining parts with dimensions up to 350 × 250 × 220 mm and a weight of up to 450 kg. The stable construction and precise axis guidance ensure high repeatability and cutting accuracy, even with demanding materials and complex contours. Additional U and V axes allow for tapered cuts up to 20°, which significantly expands the technological capabilities of the machine. The Sodick AQ325L EDM machine operates with wire diameters ranging from 0.15 to 0.30 mm, offering adjustable wire tension over a wide range and a high wire feed rate, resulting in efficient and stable machining. The immersion system enables operation in a dielectric fluid, increasing the surface quality and dimensional accuracy of the machined parts. The Sodic AQ 325 L wire EDM machine is equipped with an efficient dielectric system with a capacity of 530 liters, featuring a filtration system based on replaceable paper filters and a deionizer, which guarantees the maintenance of appropriate operating parameters and a long service life for the components. The ergonomic table height and well-thought-out design facilitate operation and the preparation of parts for machining. Thanks to its robust construction, high weight, and proven technology from the manufacturer Sodick, the AQ325L model is a reliable solution for tool shops, production facilities, and companies involved in precision metalworking. Specifications of the Sodic AQ 325L Wire EDM Machine - Table travel (X / Y axis): 350 × 250 mm - Z-axis travel: 220 mm - Auxiliary table travel (U / V axis): 80 × 80 mm - Working table size: 600 × 400 mm - Working tank dimensions: 895 × 650 mm - Maximum workpiece height: 220 mm - Maximum workpiece height during immersion machining: 200 mm - Maximum workpiece weight: 450 kg - Maximum workpiece weight during immersion machining: 300 kg - Distance from the floor to the top surface of the table: 965 mm - Taper / cutting angle: 20° / 80 mm - Wire tension: 300–2300 g - Max. wire feed rate: 250 mm/s - Wire diameter: 0.15–0.30 mm - Max. wire spool weight: 6 kg - Machine dimensions (W × D × H): 1650 × 1900 × 2040 mm - Overall machine dimensions: 2250 × 2200 mm - Machine weight: 2800 kg Dielectric tank - External dimensions (W × D × H): 550 × 2200 × 1770 mm - Weight of empty tank: 230 kg Lrjdpfx Abjz Az Uvj Uot - Capacity: 530 l - Deionizer: 10 l Filtration system: 2 replaceable paper filters - Layout / arrangement as shown in the drawing - Total length of the system: 3000 mm - Total width of the system: 3500 mm - Power supply: 3-phase AC 220V (50/60Hz)

Year of construction: 2011, condition: ready for operation (used), A complete Stürtz window production line is available. 1) Stürtz STBAZ-IPT-4000-V bar processing system for frames, sashes and mullions, year of manufacture: 2004. 2) Stürtz SE HSM-25/26-Compact-Plus four-head welding machine for sashes, year of manufacture: 2006. 3) Stürtz 4MC Motion Control CNC cleaning machine for the sash line, year of manufacture: 2011. 4) Stürtz WST-25-CNC turning station at the sash cleaner (3), year of manufacture: 2011. 5) Stürtz SE-HSM-40/26-Compact-Plus horizontal four-head welding machine for frames, year of manufacture: 2006. 6) Stürtz 2MC Motion Control CNC cleaning machine in the frame line, year of manufacture: 2008. 7) Stürtz WST-30 turning station in the frame line, year of manufacture: 2008. 8) Stürtz SE-BHT-3000 brush lifting table as a stop and transport table before the sash stop, year of manufacture: 2008. 9) Stürtz FBS-1 sash hardware screwing machine in continuous operation, year of manufacture: 2008. 10) Stürtz SE-VW-FT distribution and stacking trolley in the sash buffer system, year of manufacture: 2008. This is a complete production line for window construction. Documentation available. An on-site inspection is possible. Lrsdpfxezcyqms Ab Uet

Condition: used, total width: 1,400 mm, total length: 1,000 mm, total height: 2,700 mm, Colour: Green Empty weight: 1.500 kg - Documentation available: No - CE certificate present: No - Drive system: Conventional - Drive system: Gear drive - Power [kW]: 3 - Table type: Fixed table - Table length [mm]: 650 - Table width [mm]: 540 - Drilling depth [mm]: 280 - Drilling capacity [mm]: 40 - Reach [mm]: 315 - Tool holder: MK4 - Main spindle power [kW]: 3.0 - Min. spindle speed [rpm]: 1 - Max. spindle speed [rpm]: 1000 - Options: Drill unit feed, Tapping function - Transport dimensions: 1000mm x 1400mm x 2700mm (l x w x h) - Transport weight [kg]: 1500kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum Lrodszwc Sbjpfx Ab Ujt

Condition: good (used), Year of construction: 1980, Info: The machine was installed in a pit! - Pulling force: max. 25,000 kg - Stroke height: max. 630 mm - Working speed: 1 - 10 m/min - Return speed: 7 - 25 m/min - Total power requirement: 45 kW - Machine weight: 5,500 kg Transport and loading can be organised across Europe upon request and for an additional charge. Lrsdpjzvfpmsfx Ab Uot Prices are subject to VAT. Inspection possible by appointment. Please contact us—our team is happy to assist you. Machinery Purchase/Sale PURCHASE/SALE OF PRODUCTION & METALWORKING MACHINES, MACHINE TOOLS & MORE. Are you looking for a high-quality yet affordable machine for your production? Or would you like to sell yours? For further information or contact options, you can reach us via the contact form.

Condition: used, Year of construction: 1992, pressure 25 t throat 375 mm stroke 8 - 80 mm no. of strokes 120 Hub/min Lrjdpfx Aoykb Ebjb Ust ram adjustment 45 mm total power requirement 1,5 kW weight of the machine ca. 2,5 t

Year of construction: 2020, condition: excellent (used), functionality: fully functional, Graco Tank-Free Hotmelt Delivery System Invisipac HM 25 Year 2020 For delivering and dispensing hot melt adhesive pellets. For professional use only. 1200 psi (8.3 MPa, 83 bar) Maximum Working Pressure 400°F (204°C) Maximum Fluid Operating Temperature 100 psi (0.7 MPa, 7 bar) Maximum Air Inlet Pressure Proven adhesive savings, unsurpassed reliability. Unlike conventional tanks and many "tankless" systems, the InvisiPac system's patented Melt-on-Demand technology ensures a constant flow of adhesive that melts quickly and is dispensed instantly. You save adhesive and costs due to unplanned downtime for maintenance. With the InvisiPac system's robust reporting capabilities, you have the data you need to make smart decisions for your line that can increase efficiency, reduce costs, minimize downtime, and improve productivity. Ljdpowigbmefx Ab Uert Better performance: No clogged nozzles; No carbon-filled containers; Fast startup in as little as 10 minutes; Improved operator safety; High performance with a sustainable component; Greater cost savings; Consistent adhesive viscosity; No material damage; Little to no waste; Better dispensing control; Use the adhesive of your choice

Condition: excellent (used), Year of construction: 2024, functionality: fully functional, Linear Robot / Take-out Robot SEPRO S5-25 med Manufacturer: SEPRO Robotique S.A.S. Model: S5-25 med Machine type: Linear robot / take-out robot – currently used on an injection moulding machine, but can also be used as a stand-alone unit for other applications Ljdpoytnxgjfx Ab Uort Year of manufacture: 2024 Maximum output: 1.5 kVA Weight: 100 kg Voltage: 3×400 V to 3×480 V ±10 % Frequency: 50/60 Hz Short circuit withstand: 10 kA Automation system manufacturer: SEPRO Robotique GmbH CE marking: available Location: Freiburg

Condition: used, functionality: unexamined, machine/vehicle number: 516043004056, Year of construction: 2004, operating hours: 5,813 h, Electric four-wheel forklift Still R 60-25, manufactured in 2004, load capacity 2,500 kg. Factory number 516043004056, unladen weight 2,879 kg, permissible total weight 7,405 kg, rated drive power 12.5 kW. Battery voltage 80 V, permissible battery weight 1,480 to 1,636 kg. Operating hours 5,813 h. Equipment: driver protection canopy, fork length 1,050 mm. Lredpfx Aoz A Upgjb Uot Location: Homburg (Saar), Germany. Inspection by appointment only. Price upon request, net plus VAT, ex location; dismantling and loading by arrangement. All information without guarantee.

Condition: good (used), Gas metal arc welding machine, arc welding system, MIG/MAG welding system, welding machine Lodoz A R R Tspfx Ab Usrt -Manufacturer: Messer Griesheim, MIG/MAG gas-shielded welding machine -Type: Euromag 25-2 -Max. welding power: 250 A -Wire feed: 4-roll drive, separate, mobile -Accessories: Hose assembly, ground cable (see photos) -Dimensions: 970/490/H890 mm -Weight: 168 kg

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, We are selling this lathe, which has already been disconnected and is stored in our warehouse. A video of the machine can be sent via WhatsApp. The machine does not have steady rests. Swinging diameter over the bed: 1320 mm Swinging diameter over the carriage: 950 mm Turning length: 6,000 mm Max. workpiece weight: 14,000 kg Machine weight: 18,500 kg General overhaul performed in 2009. Ledpfx Asz En Dvob Usrt

Condition: used, functionality: fully functional, Year of construction: 2022, operating hours: 8,065 h, machine/vehicle number: 8008, control type: CNC control, degree of automation: automatic, actuation type: electric, controller manufacturer: BECKHOFF, laser type: fiber laser, laser source manufacturer: nLight, laser source model: 15000, laser power: 15,000 W, laser wavelength: 1,080 nm, sheet thickness steel (max.): 40 mm, sheet thickness stainless steel (max.): 30 mm, sheet thickness aluminum (max.): 30 mm, table length: 25,100 mm, table width: 3,100 mm, table height: 900 mm, working length: 25,100 mm, working width: 3,100 mm, working height: 900 mm, feed rate X-axis: 50 m/min, feed rate Y-axis: 50 m/min, feed rate Z-axis: 50 m/min, positioning accuracy: 0.1 mm, repeat accuracy: 0.35 mm, workpiece weight (max.): 24,750 kg, type of cooling: water, overall weight: 55,000 kg, warranty duration: 6 months, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, safety light barrier, We are offering for sale a state-of-the-art NUKON EXTREME LARGE laser cutting machine from 2022, equipped with a 15 kW nLIGHT fiber laser source with Corona technology, CNC control, and Beckhoff drives. The machine is in continuous production use, fully operational, and available for viewing during operation. This solution is designed for the most demanding production facilities engaged in cutting large-format parts, steel structures, and thick sheets. Technical data: Manufacturer: NUKON Model: Extreme Large 30250 BEVEL Year of manufacture: 2022 Laser power: 15 kW Laser source: nLIGHT Fiber Laser with Corona technology Working area: 3000 × 25000 mm Cutting head: BEVEL – bevel cutting up to ±45° CNC control: Beckhoff Servo drives: Beckhoff Equipment and advantages: - High-performance nLIGHT laser source equipped with Corona technology, enabling dynamic adjustment of the laser beam characteristics depending on the material type and thickness, resulting in higher edge quality, faster piercing, and increased production efficiency; - Professional Beckhoff control and automation system, valued for its speed, precision, and reliability in industrial applications; - BEVEL cutting head, allowing for the execution of welding bevels without the need for additional processing; - Ability to cut large-format sheets up to 25 meters in length; - High dynamic performance and excellent cutting quality; - Ideal for the production of steel structures, components for heavy industry, energy, offshore, shipbuilding, and machine manufacturing. Lrjdszphkmopfx Ab Uot Technical condition: The machine was commissioned in 2022 and has been in operation at a production facility ever since. It is regularly serviced, is in very good technical condition, and is still in use, allowing for the possibility of conducting tests and viewing the machine during operation in production. The buyer has the opportunity to perform their own cutting tests and thoroughly check all the functions of the device before purchase. Upon request, we can provide additional photos, videos of the machine in operation, and a complete technical specification. We invite you to contact us for detailed information and to arrange a demonstration of the machine. PRICE: 300,000 EUR

Condition: new, Year of construction: 2018, functionality: fully functional, machine/vehicle number: 2018w25-000298, overall weight: 3 kg, total length: 180 mm, volume flow: 2.5 m³/h, operating pressure: 10 bar, final pressure: 10 bar, power: 6 kW (8.16 HP), input voltage: 230 V, input frequency: 50 Hz, type of input current: AC, Unused stock item: KSB Calio S 25-40. Highly efficient heating and drinking water pump for energy-saving use in heating and drinking water systems. Its compact design and high efficiency ensure a durable and cost-effective solution. Type: Calio S 25-40 Lsdpfx Abov Tm Hfe Usrt Machine number: 29134756 Product number: 2018w25.000298 Nominal diameter: DN 25 Maximum head: 4.9 m Voltage: 230 V Efficient, variable-speed circulation pump Integrated control system for optimized performance