Used Gws 25 230 for sale (19,019)

Condition: not inspected (used), machine/vehicle number: 42 255 016, functionality: unexamined, table width: 260 mm, table length: 340 mm, overall weight: 400 kg, spindle speed (max.): 4,000 rpm, No minimum price – guaranteed sale to the highest bidder! Submitting a bid obligates timely collection between 04/05/26 and 07/05/26. TECHNICAL DETAILS Table dimensions: 340 x 260 mm (with two T-slots) Spindle speed: 80 to 4,000 rpm MACHINE DETAILS Iedpfx Absyr Iwaecohw Operating voltage: 380 V Frequency: 50 Hz Dimensions & Weight Dimensions (L x W x H): 700 x 500 x 2,100 mm Weight: 400 kg External reference: 52

Condition: used, maximum load weight: 1,792 kg, overall weight: 2,500 kg, axle configuration: 2 axles, first registration: 03/2025, loading space length: 4,000 mm, loading space width: 2,010 mm, total width: 2,100 mm, total height: 1,000 mm, A27 GW26NGA00001 Car Transport Trailer STEMA FHAK 25-40-21.2 Vehicle transport trailer, 2-axle trailer, type AT2035, gross vehicle weight: 2.5 t, flatbed, equipped with 10'' tires, loading area: wooden floor, additional ramps for lowered vehicles, overrun braked, 100 km/h approval, with WAP901 cable winch and manual hydraulics. Main frame: Extremely robust and torsion-resistant, with crash-tested safety V-drawbar. Tiltable, sturdy frame construction with safety locks. All frame components are hot-dip galvanized by immersion bath, providing corrosion resistance. Running rails: Extra-wide, perforated, non-slip running rails made of galvanized steel sheet with large elongated holes for securely fastening lashing straps. The extra-wide rail allows for easy transport of vehicles with various wheelbases. Attached loading ramps ensure easy loading and unloading. Side panels: Signal red powder coating (corrosion-free and resistant to scratches) for increased safety. Vehicle not reconditioned ...and many more features. Ihsdpfxeyn Ugme Abcow Subject to errors and prior sale.

Condition: used, maximum load weight: 1,297 kg, overall weight: 1,800 kg, axle configuration: 1 axle, first registration: 08/2022, loading space length: 2,570 mm, loading space width: 1,530 mm, loading space height: 350 mm, total width: 1,650 mm, total height: 690 mm, Year of construction: 2022, A38 GW26NG000335, rear tipper trailer by STEMA, model ROCKO SHRK 18-25-15.1, GVW 1,800 kg, high loader, mesh extension foldable on all sides, overrun braked, 100 km/h, hydraulic Flexipump – cordless screwdriver pump. Subject to errors and prior sale. Ihsdpfx Absyn Uczscew

Condition: used, maximum load weight: 895 kg, overall weight: 1,300 kg, axle configuration: 1 axle, first registration: 07/2021, loading space length: 1,975 mm, loading space width: 1,275 mm, total width: 1,960 mm, total height: 590 mm, A29 GW26G000232 Motorcycle trailer for 3 motorcycles, Manufacturer: STEMA, Model: SHM 13-25-18.1, * 100 km/h version with installed shock absorbers * Integrated ramp rail in every standard version Ihedpfx Ajyn Ub Dobcew * Low loading platform and long ramp rail * Convenient loading and unloading * Smooth driving behavior and robust chassis * Stable wheel brackets for secure motorcycle support * Side rails (optional) * Numerous additional lashing points * Manufactured according to EC regulations * Side underrun protection bars on both sides 1,300 kg, high-loader, inertia braked, 100 km/h, high-loader, for 3 vehicles, with 2 loading ramps behind the license plate, converted to 13" tires Loading height: 580 mm Errors and prior sale excepted.

Condition: reconditioned (used), functionality: fully functional, working width: 400 mm, area performance: 1,600 m²/h, overall weight: 55 kg, warranty duration: 12 months, water tank capacity: 25 l, KARCHER BR 40/25 C Bp Pack Scrubber NEW 12V 85Ah SIAP GEL BATTERIES (2x) NEW NEOS 24V 10A BATTERY CHARGER 400mm cleaning head equipped with new medium-hard cylindrical brushes for work on any surface. New natural rubber squeegees A built-in battery charger simplifies daily operation. The device is equipped with a new, durable drain hose and a new suction hose. The suction turbine ensures high water suction power from the squeegee. Each device we offer has individually taken photos; you buy exactly what you see. TECHNICAL DATA: Working width (mm): 400 Suction width (mm): 770 Power supply: battery Clean/dirty water tank (l): 25/25 Brush pressure (g/cm²): 250 Brush speed (rpm): 1350 Theoretical capacity (m²/h): 1600 Weight (kg): 55 Ihsdpfx Aeytplbsbcow Dimensions (L x W x H) (mm): 800 x 575 x 830 INCLUDED: NEW 12V 85Ah SIAP GEL BATTERIES (2x) NEW NEOS 24V 10A BATTERY CHARGER NEW 400mm PPL0.5 cylindrical brushes NEW suction hose NEW drain hose Suction bar with new rubbers Built-in battery charger 5 liters of Tenzi Normal solution - FREE KEY FEATURES: The 25 liter tank allows for a large amount of cleaning solution, eliminating the need to frequently stop for refills. The machine's design makes it highly maneuverable. The small turning radius allows for operation even in narrow passages and alleys. The squeegee bar ensures precise suction of the solution from the cleaned surface. The large working width (400mm) ensures high surface coverage. The control panel is very clear and intuitive.

Condition: new, functionality: fully functional, Year of construction: 2026, overall weight: 3,100 kg, input voltage: 400 V, total length: 950 mm, total width: 1,460 mm, total height: 2,380 mm, Press Characteristics open back design Ihodjytcvgspfx Abcew fixed table crankshaft mounted transversely friction clutch rigid and durable machine construction horizontally mounted crankshaft dry pneumatic clutch lifting balance device safety valves manual control Technical Specifications Press force: 25 t Stroke under nominal load: 3 mm Slide stroke: 10 – 110 mm Number of strokes: 80 – 120 strokes/min Max. die set height: 250 mm Die height adjustment: 50 mm Throat depth: 210 mm Distance between frame columns: 450 mm Working table width: 700 mm Working table length: 400 mm Working table thickness: 80 mm Table hole diameter (outer): Ø170 mm Table hole depth: 20 mm Table hole diameter (inner): Ø150 mm Slide bottom surface width: 360 mm Slide bottom surface length: 300 mm Punch hole diameter: Ø40 mm Punch hole depth: 60 mm Motor power: 3 kW Overall dimensions (W × L × H): 1460 × 950 × 2380 mm Weight: 3100 kg Equipment light curtains mechanical guards ejector in the lower table Delivery Delivery to the customer is possible. The delivery cost is determined individually based on the carrier’s quotation. Additional Information If you are interested in other machines, we encourage you to visit our website.

Condition: used, Swivel bending machine FASTI Type 2095-25-2,5 Ihodpfx Aottc Uaebcow Serial no. 94 295 004 Year of construction 1994 effective length 2540 mm max. sheet thickness 2.5 mm Stroke of upper beam 380 mm Motor power bending beam 2.2 kW Mains connection 400 Volt, 50 Hz - NC control FASTImatic FM100 - One-piece 135° pointed rail - Controlled backgauge - Continuous stop rail - controlled bending angle via control unit - electric foot switch weight 3000 kg good condition

Year of construction: 2025, condition: excellent (used), We offer an unused single-screw extruder from stock. The system was operated exclusively for test purposes and is therefore in excellent, near-new condition. Ideal for laboratory use, material development, small-scale production, or custom extrusion applications. Technical Data & Features • Screw diameter: 30 mm • L/D ratio: 25:1 • Condition: unused / only test runs • Drive: 4 kW SEW motor with gearbox • Heating zones: 4 zones with temperature controllers • Control cabinet: included in scope of delivery • Die: strand die can be adapted or manufactured new upon request • Design: robust laboratory / pilot-scale construction • Mobile: base plate with heavy-duty castors – easy to position Ihedjxxim Ispfx Abcow Special Features • Very compact design • Ideal for filament, profiles, lab trials and material testing • Barrel and screw in excellent condition (see photos) • Immediately available from stock

Condition: excellent (used), Year of construction: 1960, pressure 25 t weight of the machine ca. 25 t Iodpfx Abeyrtwfecohw

Condition: used, Two-side evaporator Goedhart -Type: FC38Dp 453-7-230 Ijdpjyttc Defx Abcjhw -Cooling capacity: 25 kW at DT8 -Fin spinning: 7 mm -Fans: 3 x 450 mmm -Dimensions: 2850 x 1050 x 470 mm -Place for electric defrost -Volume: 32 L -Weight: 260 kg -Refrigeration: Freon -Quantity in stock: 7 -Reference number: CH 596 -Condition: Used in good condition, evaporator 100% tight under nitrogen, fans working, ready to work

Condition: ready for operation (used), total width: 2,600 mm, total length: 3,100 mm, passage width: 1,250 mm, empty load weight: 25,000 kg, Model: HZPUX 150/100-1250/1000 Capacity: 230T Max ram adjustment: 1100 mm Max distance between table - ram: 2250 mm Dimensions of the table: 1000 x 1250 mm Iodpeyt S U Eofx Abcohw dimensions stamp: 1000 x 770 mm Electric motor (power): 70 CV Courant needed: 380 V Height: 6200 + 1250 mm

Condition: excellent (used), Year of construction: 2017, I sell the fully equipped edge banding machine BRANDT KDF 230 AirTec, year 2017: Configuration: Entry fence manual adjustable Premilling manual adjustable Edge banding EVA glue / PUR glue possible / AirTec unit Material pressure zone manual adjustable End cutting saws pneumatic adjustable Tilting radius milling top + bottom manual adjustable Corner rounding 1-motor manual adjustable Radius R2 scrapers pneumatic adjustable ( set of R1 included) Control panel Working thickness adjustment manually Material height 8-60mm Edge thickness 0,4-3mm Feeding speed 10m/min. Total length including feeding plate 5070mm Very good condition, fully working! Including full documentation and CE. Available immediately. Ihodpfoythxmjx Abcjw

Condition: excellent (used), PAOLONI SAC RD 230 15/24 four-sided srtug machine Technical data: Max planing width: 230 mm Max planing height: 120 mm Diameter of the spindles: 40 mm Number of spindles: 4 Order of spindles: bottom right left top Number of top steel pulling rollers: 2 Number of top rubber pulling rollers: 1 Number of smooth rollers in countertop: 1 Extraction spigot diameter: 3 x 120 mm Ihedpfx Abouy H Nwocjw Working table lubrication pump Manual lifting of the body Power supply: 400 V Total power: 21 kw Overall dimensions: Length: 3280 mm Width: 1290 mm Height: 1500 mm

Condition: used, functionality: fully functional, mileage: 34,000 km, power: 161.81 kW (220.00 HP), axle configuration: 4x4, fuel: diesel, Year of construction: 1995, Equipment: additional headlights, all wheel drive, trailer coupling, Are you looking for a reliable and affordable emergency vehicle for your fire department? Then you have come to the right place! From our immediately available stock of used vehicles, we offer: Water Tank Firefighting Vehicle TLF 16/25 ALL-WHEEL DRIVE 4x4 Magirus on IVECO 135E22 The TLF 16/25 is the proven combination of the advantages of crew fire engines and water tank firefighting vehicles. With a squad crew and ample space for firefighting and rescue equipment, the vehicle is prepared for most operational scenarios. General Data: • Year of manufacture: 1995 • Mileage: approx. 34,000 km Chassis: • IVECO 135E22 4x4 with 220 HP (159 kW) • Diesel engine with manual transmission Cab: • Standard, spacious crew cab (1+5) in RAL 3000 (fire red) • Mounts for 2 self-contained breathing apparatus in the crew compartment Bodywork: • Manufacturer Magirus Eurofire • TLF 16/25 body according to DIN standards • Three large lateral equipment compartments each side • Extendable steps for the front side equipment compartments • Brackets for standard equipment load • Mounts for 2 additional breathing apparatus • Roof compartment Fire Pump / Water Tank: • Magirus FPN 1600-8 centrifugal fire pump • Capacity 1,600 l/min at 8 bar • Water tank 2,600 l Ihjdpfxsxk T Efo Abcsw Firefighting Equipment: • Fixed rapid action hose reel, 50 m, in upper compartment G6 Safety and Lighting: • 2 rotating beacons at the front and 1 at the rear • Pneumatic special signal system (Martin horn) • Rear-view camera • Hygiene board available on request We are happy to provide you with a specific offer and can present the vehicle to you in detail at our premises in Berlin. All information is provided to the best of our knowledge and belief, without guarantee of completeness or accuracy. This advertisement does not constitute an offer, but is for information purposes only. Subject to prior sale!

Condition: used, functionality: fully functional, mileage: 15,000 km, power: 161.81 kW (220.00 HP), fuel type: diesel, fuel: diesel, color: red, Year of construction: 1993, Equipment: additional headlights, Tank Firefighting Vehicle TLF16/25 Chassis Mercedes Type 1222 Year of manufacture: 1993 Engine power: 220 HP (159 kW) Fuel: Diesel Transmission: Manual gearbox Drive: 4x4 Mileage: ≈ 15,000 km Water tank: 2,600 liters Cab Crew cab RAL 3000 Flame Red Connector configuration: 12V/24V Superstructure Ziegler Roof: walkable, slip-resistant Roof box Rapid intervention hose Pump FPN 16/8 Ziegler Lighting Scene lighting Equipment compartment lighting Pump compartment lighting Cab lighting Ihsdpfswcykbex Abcsw Roof lighting Additional spotlights Equipment Compartments Three equipment compartments per side (left and right) 1 pump compartment (rear) Generous storage space Secure mounting of load Special Signaling System 2 blue rotating beacons Front strobes on the hood Martinshorn siren system Additional Equipment Rapid intervention system > with 50 m form-stable hose Battery maintenance system Scene lighting Illuminated controls Reversing camera Hygiene board on request Further equipment available on request. Please contact us for more information. We look forward to your visit in Berlin. All details provided to the best of our knowledge, without guarantee for completeness or accuracy. This advertisement is for informational purposes only and does not constitute a binding offer. Subject to prior sale!

Condition: used, Technical data: Max planing width: 240 mm Max planing height: 130 mm Spindle diameter: 400 mm Number of spindles: 4 Spindle order: bottom right left top Each spindle on a separate engine Toothed roller in the table before the first head Number of upper steel pulling rollers: 4 Number of upper rubber pulling rollers: 1 Smooth feed adjustment Feed on cardans Worktable lubrication pump 2 smooth rollers in the table Pressure: 6 atm. Electric lifting of the body Power supply: 400 V Total power: 28 kW Overall dimensions: Iodpjv Um Tbofx Abcjhw Length: 3780 mm Width: 1800 mm Height: 1800 mm

Condition: refurbished (used), Year of construction: 2012, functionality: fully functional, travel distance X-axis: 7,000 mm, travel distance Y-axis: 3,500 mm, travel distance Z-axis: 2,000 mm, feed rate X-axis: 50 m/min, feed rate Y-axis: 50 m/min, feed rate Z-axis: 30 m/min, spindle speed (max.): 18,000 rpm, rapid traverse X-axis: 50 m/min, rapid traverse Y-axis: 50 m/min, rapid traverse Z-axis: 30 m/min, torque: 38 Nm, overall weight: 65,000 kg, Initial commissioning: 2012 Control system: Heidenhain iTNC 530 X-axis: approx. 7,000 mm Y-axis: approx. 3,500 mm Z-axis: approx. 2,000 mm A-axis: ± 100° C-axis: ± 360° Clamping table: 6,000 x 3,000 x 160 mm (sunken) with 18H12 T-slots / 250 mm spacing 2-axis milling head VH 12 Spindle power: 24 kW Spindle speed: max. 18,000 rpm Torque: max. 38 Nm Tool holder: HSK 63A Linear axis drives Feed rate X, Y, Z axes: up to 50 m/min / 30 m/min Axis acceleration X, Y, Z axes: up to 2.5 m/s² Connection data Voltage: 400 V Frequency: 50 Hz Main fuse: 200 A Power consumption: 85 kVA Dimensions, weights Machine footprint without peripherals: approx. 10,000 x 6,650 x 5,900 mm Total weight: approx. 65,000 kg Additional equipment - Double-sided access doors - 10-position tool changer Ihedpfx Absyrdc Ejcsw Optional at extra cost: - Wireless probe - Heidenhain remote diagnostics Machine condition Fully functional, very good condition. Can be inspected under power. !!! The machine was completely mechanically overhauled in 2022 !!!

Condition: new, functionality: fully functional, Year of construction: 2026, input voltage: 400 V, Hydraulic C-Frame Press Our hydraulic C-frame press is a professional machine designed for precise and demanding machining operations. Thanks to its C-frame construction, it provides easy access to the working area, allowing the processing of larger components and convenient handling of material from different sides. Key Features High pressing force – ideal for bending, straightening, pressing, and assembling components. C-frame construction – improved ergonomics and excellent accessibility to the working area. Solid steel frame – ensures durability and safe operation. Precise hydraulic control – smooth adjustment of force and operating speed. Industrial and workshop applications – perfect for both large manufacturing plants and smaller workshops. Thanks to its versatility and robust construction, this press is suitable for many industries, from automotive and metalworking to technical service centers and tool shops. Specifications Pressing force: 250 kN (approx. 25.5 tons) Isdpfxjyr Ek Ro Abcehw Maximum pressure: 25 MPa Maximum opening: 500 mm Stroke: 200 mm Table dimensions: 500 × 400 mm Throat depth: 200 mm Downward speed: 10 mm/s Return speed: 14 mm/s Motor power: 3 kW

Condition: used, Year of construction: 1994, operating hours: 6,852 h, Type of fuel: Diesel Empty weight: 3.920 kg Ijdpfx Ajyr D Eajbcjhw Dimensions (LxBxH): 263 x 115 x 254 cm Lifting capacity: 2.500 kg Lift height: 400 cm Fork dimensions: 90 x 1.000 mm - Year: 1994 - Documentation available: Yes - └ Type Documentation: User manual - CE marking present: Yes - CE certificate present: No - Serial number: 6BN10101 - Operating hours: 6852 - Lifting capacity: 2500kg - Lifting height: 4000mm - Overhead clearance: 2540mm - Free lift: 0mm - Fork length: 90mm - Maximum fork width: 1000mm - Minimum fork width: 210mm - Number of wheels: 4 Wheels - Attachment: Side-shift - Options: Half cabin, Work lights - Mast: Duplex - Drive: Diesel - Motor brand: Mitsubishi - Transport dimensions: 2630mm x 1150mm x 2540mm (l x w x h) - Transport weight [kg]: 3920kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Tess van den Boom

Condition: used, Max. Presskraft: 800 kN (80t) Ihjdpfx Abjyrnw Tecow Max. bending length: 2500 mm Currently 5 punch brackets are installed, which can be moved (Installed tool with 4 x 12 mm hole diameter and 1 x 10 mm) No other bending prisms available

Condition: ready for operation (used), Year of construction: 2019, total height: 2,050 mm, overall weight: 4,500 kg, travel distance X-axis: 260 mm, travel distance Y-axis: 260 mm, travel distance Z-axis: 100 mm, number of axes: 3, This 3s Matsuura Lumex Avance 25 hybrid metal printer was manufactured in 2019. It features a hybrid system combining metal laser sintering and high-speed milling, with a maximum workpiece size of 250 × 250 mm and a table load capacity of 90 kg. The spindle speed ranges from 450 to 45,000 rpm, accommodating a tool magazine of 20 tools. Consider the opportunity to buy this Matsuura Lumex Avance 25 metal 3D printer. Contact us for further details. • Working hours: 2,000 h • Technology: Hybrid system (metal laser sintering + high-speed milling on a single platform) • Laser type: Yb fiber laser • Laser power: up to 400 W • Layer thickness: 0.05 mm • Build/work area: • Max workpiece size: 250 × 250 mm • Table size: 270 × 270 mm • Axes/travels: • U-axis (sintering table): 185 mm • W-axis (powder blade): 522 mm • Spindle (milling): • Tool holder: BT20 (special Matsuura taper) • Tool magazine: 20 tools • Accuracy: • Positioning accuracy (X/Y/Z): ±0.0025 mm Ihjdpfxeyhcxks Abcow • Repeatability (X/Y/Z): ±0.001 mm • Materials (typical): Tool steels, maraging steel; stainless steels (e.g., 316L, 630); titanium alloys (Ti‑6Al‑4V, Ti‑6Al‑7Nb) • Machine data: • Power supply: AC 200/220 V, 50/60 Hz • Installed power: approx. 39 kVA • Inert gas: Nitrogen / Argon

Condition: ready for operation (used), Year of construction: 1989, This MORI SEIKI SL 25 was manufactured in 1989. It is a horizontal turning machine equipped with a three-jaw chuck, dead-collet head, chip conveyor, and tailstock. Clamping wedges for tools are also included. Consider the opportunity to buy this MORI SEIKI SL 25 horizontal turning machine. Contact us for more information. • Tailstock Additional equipment • Three-jaw chuck and dead-collet head 185e • Chip conveyor • Clamping wedges for tools Ijdpex D R Rrofx Abcohw

Condition: ready for operation (used), Year of construction: 2009, operating hours: 15,716 h, travel distance X-axis: 1,200 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 1,200 mm, controller manufacturer: SIEMENS, controller model: 840 D, spindle motor power: 37,000 W, number of axes: 4, This 4-axis HULLER HILLE NBH 230 horizontal machining center was manufactured in 2009. Ideal for precision engineering, it offers robust construction and reliable performance. Consider the opportunity to buy this HULLER HILLE NBH 230 horizontal machining center. Contact us for more information. Additional equipment • Machine includes a Kirchgässner pallet storage. • Magazine Capacity: 32 Euro pallet spaces for raw material • Pallet Size: 630x800 mm • Pallet Spaces: 32 Ihsdsx D Rn Repfx Abcsw Extra Information Machine still under power

Year of construction: 2018, condition: ready for operation (used), travel distance X-axis: 500 mm, overall weight: 4,050 kg, total height: 2,100 mm, product length (max.): 2,950 mm, This Inanlar CNC HAP 70 25/21 was manufactured in 2018. It features a bending length of 2,550 mm and a bending force of 70 tons. The machine includes a finger protection system and supports for safety and efficiency. With a main motor power of 5.5 kW and a stroke of 185 mm, it's ideal for precise bending operations. Contact us for more information about this machine. • Bending force: 70 tons • Bending capacity (steel 400 N/mm² over full length): 3 mm • Distance between uprights: 2,100 mmSpeeds • Down speed: 90 mm/s • Working speed (bending): 8 mm/s Ihsdpfeya D U Rex Abcow • Return speed: 70 mm/sAxes • X-axis speed: 250 mm/sSafety & equipment • Finger protection system (spaced pads): 2 units • Table supports: 2 unitsHydraulics & power • Oil tank capacity: 180 liters • Main motor power: 5.5 kWTooling / geometry • Ram stroke: 185 mm • Distance between prism table and ram: 380 mm • Throat depth: 310 mm • Table height: 800 mm • Table width: 110 mm Technical Specification Bending Length 2550 mm

Year of construction: 2007, condition: ready for operation (used), overall weight: 2,000 kg, This BRUDERER BSTA 25 was manufactured in 2007. A high-speed precision stamping press, it features a vertical main ram for precise stamping and a horizontal feed mechanism for workpiece positioning. Ideal for sheet metal forming, stamping, pressing, and metal shaping, it operates at high speeds with computerized control. Compact design ensures space-saving installation. Consider the opportunity to buy this BRUDERER BSTA 25 metal press. Contact us for more information. Machine Benefits Technical Machine Benefits • Compact design for space-saving installation • Machine type: high-speed precision stamping press • Application: sheet metal forming, stamping, pressing, and metal shaping • Number of axes: 2 moving axes (main ram axis and feed mechanism) • Main ram movement: vertical, for precise stamping • Feed mechanism: horizontal, for workpiece positioning • Maximum pressing force: approx. 250 kn (varies by model) • Speed: high-speed operation, capable of several hundred strokes per minute (model dependent) • Accuracy: high repeatability and precision machining • Control: computerized or cnc control (depending on model) Extra Information Ihodpfx Abex D H N Dscsw • Depending on the configuration/equipment, the weight ranges between 4,670 and 5,300 kg