Used Haas Dt 1 for sale (201)

Condition: good (used), Year of construction: 2006, Description: Csdpezlhvzjfx Aileha The machine is in good technical condition, and can be tested upon prior arrangement. Control system: Haas CNC. Maximum turning diameter: 406 mm / 16". Maximum turning length: 1,219 mm / 48". Distance between centers: 1,219 mm / 48". Swing over carriage/cross slide: approx. 282 mm / 11.1". X-axis travel: 203 mm / 8". Z-axis travel: 1,219 mm / 48". Spindle: A2-6. Spindle bore: 76.2 mm / 3.00". Spindle speed: 0–2,000 rpm. Spindle power: 12 HP / approx. 8.9 kW. Torque: approx. 203 Nm at 150 rpm. Chuck: typically 10" / 254 mm. Tailstock: manual, depending on configuration. Weight: approx. 2,087 kg. Machine dimensions: approx. 2,515 × 1,727 × 1,981 mm (operating dimensions). Electrical connection: 195–260 V, 3-phase / approx. 25 A or 1-phase 240 V / 40 A, depending on configuration.

Condition: good (used), Year of construction: 2005, Description: Cedpfezlhtyjx Aileha The machine is in good technical condition, and can be tested upon prior arrangement. It features a Haas CNC control system, often a 32-bit version for this model year. Travel distances for X/Y/Z axes are 1016 × 406 × 406 mm, or 40" × 16" × 16" in inches. Table dimensions are 1467 × 267 mm / 57.75" × 10.5". Spindle taper is CAT/CT 40 or BT 40. Spindle speed ranges from 0–4000 rpm. Spindle power is 5.6 kW / 7.5 HP. The spindle drive is belt-driven. Maximum torque is approximately 45 Nm at 1200 rpm. Distance from the spindle nose to the table is 102–508 mm / 4"–20". Rapid traverse rates for X/Y/Z axes are 5.1 m/min / 200 ipm. Maximum cutting feed rate is 5.1 m/min. There are 3 T-slots, each approximately 16 mm wide.

Condition: ready for operation (used), Year of construction: 2005, travel distance X-axis: 1,270 mm, travel distance Y-axis: 660 mm, travel distance Z-axis: 635 mm, controller manufacturer: HAAS, table load: 1,800 kg, spindle speed (max.): 18,000 rpm, number of slots in tool magazine: 20, number of axes: 3, This 3-axis HAAS VF5-HE vertical machining centre was manufactured in 2005. It features a spacious table size of 1372 x 610 mm and a maximum table load of 1800 kg. The machine offers impressive X-axis travel of 1270 mm, Y-axis travel of 660 mm, and Z-axis travel of 635 mm. If you are looking to get high-quality machining capabilities, consider the HAAS VF5-HE machine we have for sale. Contact us for further details. • Table dimensions: 1372 x 610 mm • Rapid traverse speed: 18,000 mm/min Chjdpfxezibu So Ailea • Spindle motor power: 30 hp • Tool magazine capacity: 20 positions • Tool change time: 4.2 sec • USB port • 3-color status light • Through-spindle coolant Additional equipment • Tool probe • Renishaw wireless workpiece probe • Chip conveyor • Set of tool holders • Documentation Technical Specification Taper Size BT 40

Condition: ready for operation (used), Year of construction: 2013, operating hours: 9,554 h, spindle speed (max.): 4,500 rpm, travel distance X-axis: 239 mm, travel distance Z-axis: 826 mm, spindle motor power: 22,400 W, number of axes: 4, This 4-axis HAAS DS-30SSY was manufactured in 2013. It features Y-axis milling capability, a sub-spindle, and live tooling, enhancing its versatility for various machining tasks. The machine includes a 12-station bolt-on turret and comes equipped with a chip conveyor and mist collector. If you are looking to get high-quality turning capabilities, consider the HAAS DS-30SSY horizontal turning machine we have for sale. Contact us for further details. • Condition: In good condition • Usage: Motion Time 54,567 h; Servo Time 62,795 h • Spindles: Dual spindle (sub-/counter spindle; rarely used) • Turret: 12-station bolt-on turret (BMT65 style) • Capabilities: Y-axis milling, live tooling • Electrical: 360–480 V, 3-phase, 50/60 Hz; Full load amps 40 A; Largest load 70 A; Short-circuit interrupting capacity 10,000 A Additional equipment Chedjy R Dikepfx Ailoa • Chip conveyor (Jorgensen) • Mist collector: SARA Ultra-Jet 2 SD • Parts catcher • Coolant hose • Foot pedals • Samchully MH-206V1 as a counter-spindle chuck Technical Specification Counter Spindle Yes Driven Tools Yes

Condition: ready for operation (used), Year of construction: 2017, operating hours: 2,104 h, travel distance X-axis: 762 mm, travel distance Y-axis: 406 mm, travel distance Z-axis: 508 mm, spindle speed (max.): 8,100 rpm, number of axes: 3, This 3-axis HAAS VF-2 was manufactured in 2017. It features an X-axis travel of 762 mm, Y-axis travel of 406 mm, and Z-axis travel of 508 mm. If you are looking to get high-quality machining capabilities, consider the HAAS VF-2 vertical machining centre we have for sale. Contact us for further details. Cedszh Hf Tepfx Ailsha

Condition: ready for operation (used), Year of construction: 2018, operating hours: 7,016 h, travel distance X-axis: 1,626 mm, travel distance Y-axis: 813 mm, travel distance Z-axis: 762 mm, spindle speed (max.): 12,000 rpm, number of axes: 3, This 3-axis HAAS VM-6 was manufactured in 2018. It features an impressive X-axis travel of 1,626 mm, Y-axis travel of 813 mm, and Z-axis travel of 762 mm. If you are looking to get high-quality machining capabilities, consider the HAAS VM-6 vertical machining centre we have for sale. Contact us for further details. Csdezh Hgdepfx Ailsha

Condition: ready for operation (used), Year of construction: 2016, operating hours: 5,326 h, travel distance X-axis: 1,626 mm, travel distance Y-axis: 813 mm, travel distance Z-axis: 762 mm, table load: 207 kg, spindle speed (max.): 12,000 rpm, spindle motor power: 22,400 W, number of axes: 3, This 3-axis HAAS VF-6SS was manufactured in 2016. It features impressive X, Y, and Z travels of 1,626 mm, 813 mm, and 762 mm respectively, along with a high-power 22.4 kW spindle capable of reaching 12,000 rpm. The machine includes a high-speed side-mount tool changer with 24+1 stations and a robust table load capacity of 907 kg. If you are looking to get high-quality machining capabilities, consider the HAAS VF-6SS vertical machining centre we have for sale. Contact us for further details. • Travels: X 1,626 mm; Y 813 mm; Z 762 mm; spindle nose to table 102–864 mm • Table: 711 × 1,626 mm; 5 × 16 mm T-slots; 125 mm T-slot pitch; max table load 907 kg • Spindle: max torque 122 Nm @ 2,000 rpm; ABEC Class 7 bearings; electronic orientation; water-cooled spindle head; BT40; through-spindle air blast; tool release button • Tool changer: • Standard side-mount 24+1, BT40; all-electric bi-directional; max tool Ø 76 mm (full), 127 mm (adjacent pockets empty); max tool weight 5.4 kg; tool-to-tool 2.3 s; chip-to-chip 3.2 s • Optional 40+1: tool-to-tool 2.8 s; chip-to-chip 3.6 s; max tool Ø 76 mm (full), 152 mm (adjacent pockets empty) • Feed rates: rapid traverse X/Y/Z 30.5 m/min; max cutting feed 21.2 m/min • Motors/Drives: axis max thrust (X/Y/Z) 15,124 N; direct-coupled servo motors; brushless servo motors; Vector Drive (Y-Δ) • Coolant & lubrication: 360-litre pull-out coolant tank; automatic lubrication system • Construction & enclosure: rigid cast iron construction; triangular wide-base castings; heavy-duty sheet steel enclosure; 14-gauge cold-rolled steel; free-flow enclosure design; door opening width 1,549 mm • Machine size & utilities: max height 3,378 mm; width 5,232 mm; depth 3,835 mm (door open); compressed air 113 l/min @ 6.9 bar; electrical 380 VAC, 3-phase, 50–60 Hz; installed power 28 kVA • Controls/Functions: Rigid tapping; Remote Hand Jog (RJH); tool load monitoring; 5 spare M-functions • Accuracy/Quality: 100% ballbar test for 3D squareness and machining accuracy Chodpfxjzh Hbnj Ailea • Other: high-power cartridge spindle; high-speed side-mount tool changer (24+1); easily accessible coolant tank; 1-year parts and labour warranty Additional equipment • None listed (no robots, automation, chip conveyor, bar feeder, or other external accessories specified)

Condition: ready for operation (used), Year of construction: 2023, operating hours: 2,408 h, spindle speed (max.): 4,500 rpm, travel distance X-axis: 239 mm, travel distance Y-axis: 102 mm, travel distance Z-axis: 584 mm, spindle motor power: 22,400 W, overall weight: 5,534 kg, number of axes: 4, This 4-axis HAAS DS30Y horizontal turning machine was manufactured in 2023. It features a maximum part swing of 533 mm and a maximum cutting diameter of 349 mm. The machine is equipped with a robust turret that accommodates 12 tools, ensuring versatility in operations. If you are looking to get high-quality turning capabilities, consider the HAAS DS30Y machine we have for sale. Contact us for further details. • Capacities: • Chuck size (main): 10.0 in / 254 mm • Max part swing: 21.0 in / 533 mm • Max cutting diameter (with BMT65 turret): 13.75 in / 349 mm • Max cutting length (varies with workholding): 32.5 in / 826 mm • Bar capacity: 3.00 in / 76 mm • Between centers: 32.5 in / 826 mm • Feedrates (rapids): • X: 472 ipm / 12.0 m/min • Y: 472 ipm / 12.0 m/min • Z: 945 ipm / 24.0 m/min • Axis motors (max thrust): • X: 4100 lbf / 18238 N • Y: 2300 lbf / 10231 N • Z: 5100 lbf / 22686 N • Main spindle: • Spindle nose: A2-6 • Drive system: Direct speed, belt drive • Max torque: 275 ft-lbf @ 500 rpm / 373 Nm @ 500 rpm • Draw tube bore: 3.0 in / 76 mm • Spindle bore: 3.50 in / 88.9 mm • Main spindle C axis: • Max speed: 60 rpm • Max rating: 5.0 hp / 3.7 kW • Positioning (±): 0.01° • Brake diameter: 13.9 in / 353 mm • Brake holding torque: 250 ft-lbf / 339 Nm • Control type: Interpolated motion and positioning • Secondary spindle: • Chuck size: 8.3 in / 210 mm • Spindle nose: A2-5 • Drive system: Direct speed, belt drive • Max rating: 15.0 hp / 11.2 kW • Max speed: 4000 rpm • Max torque: 100 ft-lbf @ 870 rpm / 135.6 Nm @ 870 rpm • Spindle bore ø (non-through): 0.81 in / 20.7 mm • Secondary spindle C axis: • Max rating: 5.0 hp / 3.7 kW • Max speed: 60 rpm • Positioning (±): 0.01° • Brake diameter: 8.5 in / 216 mm • Brake holding torque: 140 ft-lbf / 190 Nm • Control type: Interpolated motion and positioning • Secondary spindle positioning (M119): • Positioning (±): 0.02° • Brake diameter: 8.5 in / 216 mm • Control type: Positioning only Cedpfx Aijzh Eh Tsloha • Turret: • Number of tools: 12 stations • OD vs ID tools: Any combination (will vary with turret) • Boring bar rear clearance (from back of turret): 4.00 in / 102.0 mm • Live tooling: • Max speed: 4000 rpm • Drive ratio: 1:1 • Tooling: BMT65 • General: • Coolant capacity: 55 gal / 208 L • Air requirements: • Air required: 4 scfm @ 100 psi / 113 L/min @ 6.9 bar • Inline air hose: 3/8 in • Coupler (air): 3/8 in • Minimum air pressure: 80 psi / 5.5 bar • Electrical specification: • Spindle speed: 4500 rpm • Drive system: Direct speed, belt drive • Spindle power: 30.0 hp / 22.4 kW • Input AC voltage (3-phase) – low: 220 VAC; full load amps: 70 A • Input AC voltage (3-phase) – high: 440 VAC; full load amps: 35 A • Dimensions – shipping: • Domestic pallet: 171 in x 90 in x 98 in / 434 cm x 229 cm x 249 cm • Export pallet: 171 in x 90 in x 98 in / 434 cm x 229 cm x 249 cm Technical Specification Counter Spindle Yes Driven Tools Yes

Condition: good (used), Year of construction: 1999, Machine is in good condition. X 750 mm Y 400 mm Z 500 mm 10.000 rpm Chodpfx Aiowx Rafsloa

Condition: ready for operation (used), Year of construction: 2023, operating hours: 1,775 h, spindle speed (max.): 4,500 rpm, travel distance X-axis: 239 mm, travel distance Y-axis: 102 mm, travel distance Z-axis: 584 mm, spindle motor power: 22,400 W, number of axes: 4, This 4-axis HAAS DS30Y horizontal turning machine was manufactured in 2023. It features a maximum part swing of 533 mm and a maximum cutting diameter of 349 mm. The machine is equipped with a robust turret that accommodates 12 tools and offers a maximum cutting length of 826 mm. If you are looking to get high-quality turning capabilities, consider the HAAS DS30Y machine we have for sale. Contact us for further details regarding this machine. • Capacities (S.A.E / Metric) • Chuck size: 10.0 in (254 mm) • Max part swing: 21.0 in (533 mm) • Max cutting diameter (with BMT65 turret): 13.75 in (349 mm) • Max cutting length (varies with workholding): 32.5 in (826 mm) • Bar capacity: 3.00 in (76 mm) • Between centers: 32.5 in (826 mm) • Feedrates (S.A.E / Metric) • Rapids on X: 472 ipm (12.0 m/min) • Rapids on Y: 472 ipm (12.0 m/min) • Rapids on Z: 945 ipm (24.0 m/min) • Axis Motors (S.A.E / Metric) • Max thrust X: 4100 lbf (18,238 N) • Max thrust Y: 2300 lbf (10,231 N) • Max thrust Z: 5100 lbf (22,686 N) • Main Spindle (S.A.E / Metric) • Spindle nose: A2-6 • Drive system: Direct speed, belt drive • Max torque: 275.0 ft-lbf @ 500 rpm (373.0 Nm @ 500 rpm) • Draw tube bore: ø 3.0 in (76 mm) • Spindle bore: ø 3.50 in (88.9 mm) Chedpfszhwx Djx Ailoa • Main Spindle C Axis (S.A.E / Metric) • Max speed: 60 rpm • Max rating: 5.0 hp (3.7 kW) • Positioning (±): 0.01° • Brake diameter: 13.9 in (353 mm) • Brake holding torque: 250 ft-lbf (339 Nm) • Control type: Interpolated motion and positioning • Secondary Spindle (S.A.E / Metric) • Chuck size: 8.3 in (210 mm) • Spindle nose: A2-5 • Drive system: Direct speed, belt drive • Max rating: 15.0 hp (11.2 kW) • Max speed: 4000 rpm • Max torque: 100.0 ft-lbf @ 870 rpm (135.6 Nm @ 870 rpm) • Spindle bore ø (non-through): 0.81 in (20.7 mm) • Secondary Spindle C Axis (S.A.E / Metric) • Max rating: 5.0 hp (3.7 kW) • Max speed: 60 rpm • Positioning (±): 0.01° • Brake diameter: 8.5 in (216 mm) • Brake holding torque: 140 ft-lbf (190 Nm) • Control type: Interpolated motion and positioning • Secondary Spindle Positioning (M119) (S.A.E / Metric) • Positioning (±): 0.02° • Brake diameter: 8.5 in (216 mm) • Control type: Positioning only • Turret (S.A.E / Metric) • Number of tools: 12 stations • OD vs ID tools: Any combination (will vary with turret) • Boring bar rear clearance (from back of turret): 4.00 in (102.0 mm) • Live Tooling (S.A.E / Metric) • Max speed: 4000 rpm • Drive ratio: 1:1 • Tooling: BMT65 • General (S.A.E / Metric) • Coolant capacity: 55 gal (208 L) • Air Requirements (S.A.E / Metric) • Air required: 4 scfm @ 100 psi (113 L/min @ 6.9 bar) • Inline air hose: 3/8 in • Coupler (air): 3/8 in • Air pressure min: 80 psi (5.5 bar) • Electrical Specification (S.A.E / Metric) • Drive system: Direct speed, belt drive • Spindle power: 30.0 hp (22.4 kW) • Input AC voltage (3 phase) - Low: 220 VAC; Full load amps (Low): 70 A • Input AC voltage (3 phase) - High*: 440 VAC; Full load amps (High*): 35 A • Dimensions - Shipping (S.A.E / Metric) • Domestic pallet: 171 in x 90 in x 98 in (434 cm x 229 cm x 249 cm) • Export pallet: 171 in x 90 in x 98 in (434 cm x 229 cm x 249 cm) Additional equipment • Bar feeder Technical Specification Counter Spindle Yes Driven Tools Yes

Condition: ready for operation (used), Year of construction: 2007, spindle speed (max.): 2,400 rpm, travel distance X-axis: 287 mm, travel distance Z-axis: 864 mm, overall weight: 7,000 kg, controller manufacturer: HAAS, number of axes: 3, This 3-axis HAAS SL 30TBHE was manufactured in 2007. It features a maximum turning diameter of 406 mm and a maximum turning length of 864 mm. The machine is equipped with a chuck diameter of 315 mm and a spindle bore of 103 mm. If you are looking to get high-quality turning capabilities, consider the HAAS SL 30TBHE CNC lathe we have for sale. Contact us for further details. • Configuration: 3-axis machine with driven tools; no counter spindle • Spindle bore: 103 mm Cjdpfx Ajzhwlqjiloha • Chuck diameter: 315 mm • Max turning diameter: 406 mm • Max turning diameter over saddle: 368 mm • Max turning length: 864 mm • Tool turret capacity: 12 positions • Live tooling: Yes Additional equipment • Included tooling: 1 live tool + additional accessories (unspecified) Technical Specification Counter Spindle No Driven Tools Yes

Condition: like new (used), Year of construction: 2023, operating hours: 800 h, functionality: fully functional, machine/vehicle number: SN3128158, turning diameter over cross slide: 533 mm, turning length: 572 mm, spindle bore: 63 mm, spindle speed (max.): 4,000 rpm, New condition + tooling + bar fender Cjdpfx Aovwz T Uoileha

Condition: excellent (used), Year of construction: 2016, With B + C axis Working travels 762 x 508 x 508 mm Table diameter 500 mm Chsdpfx Aielhqydslja Spindle taper 40 Spindle speeds -12'000 rpm Tool changer 40 Pos. Control HAAS Coolant through spindle Misc.accessories MARCELS MASCHINEN CH

Condition: used, Year of construction: 2014, operating hours: 7,500 h, 5-AXIS MACHINING CENTER BRAND: HAAS VF-3 SS Chjdpfx Aiozminnelea YEAR OF FIRST INSTALLATION: 2014 TABLE DIMENSIONS: 1,219 mm x 457 mm MAXIMUM TABLE LOAD: 800 KG TRAVEL: X: 1,016 mm Y: 508 mm Z: 635 mm SPINDLE SPEED: 12,000 RPM TOOL MAGAZINE: 40 POSITIONS HIGH PRESSURE / INTERNAL SPINDLE COOLING RENISH PROBE PRESETTING ADJUSTABLE COOLANT NOZZLE

Condition: new, Coolant mixer for Haas CNC machines. Cjdpfx Aezllbhjiloha

Condition: like new (used), Year of construction: 2024, operating hours: 250 h, functionality: fully functional, overall weight: 8,255 kg, HAAS VF-6SS Vertical Machining Center – 2024 2024 HAAS VF-6SS Vertical Machining Center in excellent condition, purchased new in 2024 and with very low operating hours. Chjdozrhrcopfx Ailea The machine has been used only for a specific production project and remains in outstanding mechanical and cosmetic condition. Equipment HAAS HRT310 Rotary Table (4th Axis) HTS9 Tailstock WIPS – Wireless Intuitive Probing System Through Spindle Coolant (21 bar) Through Tool Air Blast (TAB) High Speed Machining (HSM) 12,000 rpm Direct Drive Spindle 22.4 kW Spindle Motor Haas Next Generation Control Ethernet & USB Automatic Lubrication The machine can be inspected under power in Portugal. Immediately available.

Condition: like new (used), Year of construction: 2024, operating hours: 50 h, functionality: fully functional, total height: 2,290 mm, total length: 5,760 mm, total width: 4,440 mm, overall weight: 5,760 kg, 2024 HAAS ST-35 CNC LATHE – ONLY 50 HOURS – LIKE NEW – FULLY EQUIPPED 2024 HAAS ST-35 CNC Turning Center in outstanding condition with only 50 operating hours. The machine was purchased for a specific production project and has seen very limited use. It is in excellent mechanical and cosmetic condition and is ready for immediate production. Main Features Programmable Tailstock Chip Conveyor High Pressure Coolant Automatic Tool Presetter (ATP) Haas Next Generation Control (NGC) Ethernet & USB Connectivity Touch Screen Control Work Light Complete documentation The machine has always been operated in a clean industrial environment and maintained according to Haas recommendations. The machine can be inspected under power in Portugal. Chsdszrhinopfx Ailea Additional photos, videos and technical information are available upon request. Price: €90,000 + VAT

Condition: ready for operation (used), Year of construction: 2014, functionality: fully functional, travel distance X-axis: 2,134 mm, travel distance Y-axis: 813 mm, travel distance Z-axis: 762 mm, table load: 1,814 kg, spindle speed (max.): 8,100 rpm, The machine can be inspected while powered on during production! TECHNICAL DETAILS Travel range, X-axis: 2,134 mm Travel range, Y-axis: 813 mm Travel range, Z-axis: 762 mm Max. spindle speed: 8,100 rpm Spindle motor power: 22.4 kW Max. torque: 122.0 Nm at 2,000 rpm Table dimensions: 2,134 x 711 mm Max. load capacity on table: 1,814 kg Chsdpfx Aijzg Drzelea Number of tool magazine slots: 31 Distance from spindle nose to machine table (max.): 864 mm Distance from spindle nose to table (min.): 102 mm MACHINE DETAILS Control system: HAAS Table dimensions: 2,134 x 711 mm Max. load capacity on table: 1,814 kg EQUIPMENT Documentation/Manual Chip conveyor

Condition: excellent (used), Year of construction: 2016, operating hours: 13,000 h, functionality: fully functional, Vertical machine center Haas VM 6 with below options 12000 rpm spindle HSS Touch probe Tool setter Cjdpfx Asyb S U Ujileha Through spindle coolant chip auger

Condition: excellent (used), Year of construction: 2007, X-axis: 1,600 mm Y-axis: 800 mm Z-axis: 740 mm Max. workpiece size: 1,600 x 700 mm Max. table load: 1,200 kg Spindle speed: 12,000 rpm Tool holder: SK40 Tool changer: 24 positions Chjdpfx Aozcpplsilsa Control system: HAAS Version M15 Includes 4th and 5th axes, ORIGINAL HAAS Includes chip conveyor Includes documentation

Condition: good (used), Parts on table not come. Marked with red. Cjdpfowxdyxsx Ailjha

Condition: used, functionality: fully functional, Tool holders for HAAS VF machines 80 pieces, size BT40, including HAAS draw bolts - 6x collet chucks OZ, clamping range Ø2-Ø16 - 3x collet chucks OZ, clamping range Ø2-Ø25 - 1x collet chuck ER32 - 3x shrink fit chucks Ø6 - 1x shrink fit chuck Ø8 - 2x shrink fit chucks Ø10 - 2x shrink fit chucks Ø12 - 1x hydraulic rotary chuck Ø20 - 1x short boring chuck Ø13 Röhm - 4x Weldon Ø6 - 8x Weldon Ø8 - 11x Weldon Ø10 - 10x Weldon Ø12 - 1x Weldon Ø14 - 5x Weldon Ø16 - 5x Weldon Ø20 - 2x MK1 tool holder - 1x MK2 tool holder - 1x MK3 tool holder - 2x milling cutter holder Ø16 - 1x long milling cutter holder Ø16 - 1x extra long milling cutter holder Ø22 - 2x long Weldon Ø6 Chodpfx Aszi Ebijilja - 2x long Weldon Ø8 - 2x long Weldon Ø10 - 1x extra long Weldon Ø8 - 1x extra long Weldon Ø10

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, travel distance X-axis: 2,134 mm, travel distance Y-axis: 1,016 mm, travel distance Z-axis: 762 mm, controller model: HASS, table width: 914 mm, table length: 2,134 mm, table load: 1,800 kg, overall weight: 11,340 kg, spindle speed (min.): 40 rpm, spindle speed (max.): 7,500 rpm, coolant supply: 15 bar, distance table center to spindle nose: 864 mm, spindle motor power: 22 W, spindle nose: ISO 40, number of slots in tool magazine: 40, tool length: 406 mm, tool diameter: 63 mm, tool weight: 5,500 g, input voltage: 400 V, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, USED ​​vertical machining center with HAAS CNC Chsdpewrfamjfx Ailja

Condition: good (used), Trumpf Vectormark Type: VMc2 Trumpf Vectormark laser marker with Fuchs extraction and filtration unit Trumpf Vectormark GREEN 532nm Trumpf VMc2 Laser marker, with frequency-doubled diode-pumped Nd:YAG laser with Hurryscan 10 - galvanometer head from Scanlab Fuchs extraction and filtration unit TKFD The integrated pre-separator ensures high filter capacity Different filter stages are possible and can be perfectly adapted individually Ideal for confined spaces – can be placed under a table or integrated into machines Chodpfx Aijzdqcuslja Welding fume extraction class W3, IFA certified TKFD can also be transported in the trunk without modification Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We would be happy to answer any further questions you may have by phone.

Condition: used, Year of construction: 2005, functionality: fully functional, travel distance Z-axis: 1,219 mm, rotational speed (max.): 2,000 rpm, travel distance cross slide: 203 mm, Flatbed Lathe Manufacturer: Haas Type: TL-2 S/N: XXXXX Year of Manufacture: 08-2005 On-time hours: n/a Control: Haas CNC Technical Parameters: ----- - 4-way tool post with Parat quick change system - Z travel: 1,219 mm - X travel: 203 mm - Swing over bed: 406 mm - Swing over slide: 282 mm - Spindle bore: 76 mm - Spindle speeds: 10 - 2,000 rpm Chjdpfswftdmsx Ailsa - Coolant system - Tailstock / MT 4 - Weight: 2,100 kg Accessories: ----- - 3 Parat cartridges - 3-jaw chuck - Documentation