Used Haas Sl 10 for sale (242)

Condition: used, Year of construction: 2021, operating hours: 2,400 h, functionality: fully functional, number of axes: 5, For sale: CNC milling machine Haas UMC-750 – 5-axis vertical machining center Dwjdpsxn R N Nefx Addef Year of manufacture: 2021 Spindle taper: SK40 Tool changer: 30+1 tools Additional equipment: Renishaw probe receiver, chip conveyor, program reading and writing via USB. Axis travel: X 762 mm, Y 508 mm, Z 508 mm Worktable: Diameter 500 mm Maximum spindle speed: 8,000 rpm, direct drive The machine is in very good condition, precise, available for inspection and testing at any time.

Condition: excellent (used), Year of construction: 1995, functionality: fully functional, travel distance X-axis: 500 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 500 mm, rotational speed (max.): 7,500 rpm, Equipment: chip conveyor, Longitudinal travel X: 508 mm Cross travel Y: 400 mm Vertical travel Z: 508 mm CNC type: Haas Table length: 600 mm Table width: 355 mm Max. table load: 1350 kg Tool magazine: 20 positions Spindle taper: ISO 40 Max. spindle speed: 7500 rpm Spindle motor power: 8.3 kW Dimensions (L x W x H): 2200.0 × 2000.0 × 2300.0 mm Dodpfoxq D Ecox Addewf Weight: 3190 kg

Condition: used, Year of construction: 2007, operating hours: 7,675 h, functionality: fully functional, machine/vehicle number: 1059027, travel distance X-axis: 1,270 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 635 mm, rapid traverse X-axis: 25 m/min, rapid traverse Y-axis: 25 m/min, rapid traverse Z-axis: 25 m/min, feed length X-axis: 1,270 mm, feed length Y-axis: 508 mm, feed length Z-axis: 635 mm, feed rate X-axis: 16 m/min, feed rate Y-axis: 16 m/min, feed rate Z-axis: 16 m/min, torque: 122 Nm, controller manufacturer: Haas Automation, controller model: Haas CNC control 32 bit, workpiece length (max.): 1,321 mm, workpiece width (max.): 457 mm, workpiece height (max.): 635 mm, workpiece weight (max.): 1,588 kg, total height: 2,570 mm, total length: 3,330 mm, total width: 2,340 mm, table width: 495 mm, table height: 107 mm, table length: 1,321 mm, table load: 1,588 kg, overall weight: 5,316 kg, spindle speed (max.): 12,000 rpm, operating hours of spindle: 667 h, coolant supply: 6.9 bar, spindle motor power: 22 W, spindle nose: CT-40/BT-40, number of spindles: 1, number of slots in tool magazine: 20, mount diameter: 89 mm, tool diameter: 89 mm, tool weight: 5 g, input voltage: 440 V, type of input current: three-phase, For Sale – Haas VF-4 Vertical Machining Centre (2007 Model) Dwedpfjxu E Dzjx Addef We are selling our 2007 Haas VF-4 CNC Vertical Machining Centre, a reliable and versatile machine that has been well maintained and is ready for immediate use.

Condition: used, Year of construction: 2001, functionality: fully functional, machine/vehicle number: 26026, travel distance X-axis: 762 mm, travel distance Y-axis: 506 mm, travel distance Z-axis: 608 mm, - Year of manufacture: 07/2001 - 1st owner, from our own use - Fully functional, powered, ready for demonstration - Travel paths: 762x506x608 mm - Tool changer with 24+1 magazine positions - Spindle speed up to 7500 rpm - BT 40 - Rotatable coolant supply - Spiral chip conveyor Dedpoxp N Nqofx Addowf - Serial number: 26026 Net price unloaded, ex-site Luckenwalde (Germany), without transport.

Condition: good (used), Year of construction: 2011, functionality: fully functional, power: 37 kW (50.31 HP), first registration: 12/2011, overall weight: 3,200 kg, fuel type: electric, color: green, Wood chipper, three cutting knives, one perforating knife, 13x13 mm sieve, 2 feed rollers, main motor 37 kW, machine in good condition. Still in operation, scheduled for dismantling in 01/2026. Djdpsxpvf Eefx Addewf

Condition: used, Year of construction: 2008, functionality: fully functional, machine/vehicle number: 1064590, SPECIFICATION Travel X axis stroke 1270mm Y axis stroke 508mm Z axis stroke 635mm Distance spindle nose to table 102-737mm Table Width 457mm Length 1321mm Max. Weight on table 1588kg T Slots : width 16mm : pitch 80mm   SPECIFICATION Cont’d Spindle Taper size No.40 Dsdpfxewy Uy Es Addjwf Speed 0-7500rpm Bearings Bearing lubrication Air/oil injection Cooling Liquid cooled Motor Spindle motor, max. rating 14.9kW Feedrate Rapid X, Y & Z axis 18m/min Max. Cutting feedrate 12.7m/min Toolchanger Capacity 20 tools Type BT40 General Approximate machine weight 6033kg Air supply (min) 113lpm, 6.9 bar MACHINE EQUIPPED WITH: - Haas (Fanuc compatible) CNC Control system Programmable coolant nozzle Automatic lubrication system Enclosed guarding Swarf auger Lighting

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: 1058083, controller manufacturer: HAAS/FANUC, number of slots in tool magazine: 40, MACHINE DETAILS Tool changer: 40 positions Tool holder: BT40 Control: HAAS/FANUC Electrical data Voltage: 360–480 V Phases: 3 Dedpfxoxuikxs Addewf Frequency: 50/60 Hz Full load: 20 A Maximum load: 35 A

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, Controller HAAS Intuitiv programming with USB slot Table size 1372 x 610 mm Table load max. 794 mm „T” slots in table 16 x 80 mm and 7 pcs. Travel X axis 1016 mm Travel Y axis 660 mm Travel Z axis 635 mm Distance of spindle end to table surface (max) 742 mm Distance of spindle end to table surface (min) 107 mm Spindle speed 12000 rpm Spindle taper SK40 Spindle power 22,4 kW ATC magazin 30+1 pots Weight 6800 kgs Dimensions LxWxH = 4000 x 2500 x 2700 mm Accessories and features • Renishaw tool presetter and zero point presetter • HSM (for CAM production, 1000 lines pre-reading) • Digital MPG • for 4th axis preparation • TCS (300 psi), • Tool cooling from outside • extra filters • chip conveyor • programmable coolant nozzles • spindle orientation • coordinate system rotation • media file on screen • visual programing possibility Very good condition. Only used in single production. Dwsdpsw Tc H Sefx Addef

Condition: used, Year of construction: 2017, functionality: unexamined, machine/vehicle number: 3480, total height: 2,789 mm, total length: 2,525 mm, total width: 2,400 mm, overall weight: 8,500 kg, Number of CNC axes (X/Y/Z/A/B/C): 5 to 6 Travel paths (X/Y/Z) [mm]: 630 / 345 / 430 Max. speed (X/Y/Z) [m/min]: 30 / 30 / 30 Swivel angle grinding spindle +/- (C axis): -225° to 70° Drive power grinding spindle [kW]: 11 / 11.5 / 21 Spindle speed range [min-1]: 0 to 8,000 / 18,000 / 30,000 Grinding wheel diameter [mm]: 250 Abrasives: All types of abrasives Grinding length [mm]: 500 Workpiece length [mm]: 550 Workpiece cutting diameter [mm]: 260 Workpiece spindle taper: SK50 / HSK80/63/50 / Form A and E Control: Sinumerik One Dwedpjxqg Igjfx Addjf

Condition: used, Year of construction: 2008, functionality: fully functional, machine/vehicle number: 1069100, travel distance X-axis: 1,270 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 635 mm, - Year of manufacture: 07/2008 - 1st owner, from own use - Fully functional, powered on, ready for demonstration - Travel distances: 1270x508x635 mm - SK-40 spindle with 10,000 rpm, 14.9 kW, dual drive (Y-star) - Tool changer with 24+1 magazine positions - Rapid traverse 30.5 m/min and max. feed rate 21 m/min - Additional coolant filtration system Dodpfoxp N Hpjx Addewf - BT 40 option for SMTC40-0 - Wireless measuring and table probing system - Coolant through spindle 20.6 bar - Spiral chip conveyor - Serial number: 1069100 Net price, unloaded, ex location Luckenwalde (Germany), without transport.

Condition: used, Year of construction: 2012, x-travel 762 mm y-travel 508 mm z-travel 508 mm Control Haas CNC Max. rpm 12.000 min/-1 power capacity - main spindel 22,4 kW max. Torque 102 Nm tool taper ISO 40 table surface area 914 x 457 mm T-slots 16 mm max. table load 1362 kg number of toolpositions 24 pos. tool taper SK 40 max. tool diameter 76 (152) mm max. tool weight 5,4 kg Dwodpfx Aoxddrpoddof change-time tool to tool 2,8 sec change-time chip to chip 3,6 sec rapid traverse ( X / Y / Z ) 18,0 m/min Number of working hours 14375 h spindle drive 22,4 kW weight of the machine ca. 3,42 t dimensions of the machine ca. 3,2 x 2,5 x 2,8 m Well-maintained 5-axis machining center, 3-axis machine + 2-axis dividing head. Machine with low operating hours (14,375). Lehmann dividing head, model ix-Y3, weight 80 kg. Machine dealer with own stock of 1600 m².

Condition: good (used), Year of construction: 2011, Haas VF 3 optionally with automation, Year of manufacture 2011 / Automation 2005, Haas control, Travel X/Y/Z 1016/508/635 mm, 40-position tool changer, BT 40 spindle taper, Spindle speed up to 10,000 rpm, Tool measurement, 3D probe, Automation interface, Dwjdpfx Adoxltfujdof Automatic door, Oil mist extraction, Internal coolant supply, OPTIONAL WITH AUTOMATION: 3-axis robot, System 3R SWE, Year 2005, 1 magazine – 20 pallets, 20 pallets System 3R GPS 240, Clamping plate 20 – M 10, Modular vise/clamping block, fixed block unit, Setup station, Zero-point clamping system 3R GPS 240,

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, machine/vehicle number: 40164, controller manufacturer: HAAS/FANUC, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 24, TECHNICAL DETAILS Spindle speed: 12,000 rpm MACHINE DETAILS Control: HAAS/FANUC Electrical data Voltage: 360/480 V Phases: 3 Dodpfx Ajxuih Rjddswf Frequency: 50/60 Hz Full load: 40 A Maximum load: 70 A EQUIPMENT 24-position tool changer BT40 Belt filter system / high-pressure pump KNOLL KF 150

Year of construction: 2009, condition: used, NH3 refrigeration system. Refrigeration system includes the following: - Compressor 1, GEA Grasso type OS3 - Compressor 2, GEA Grasso type OS3 - NH3 separator - Air condenser - Heat exchanger for energy recovery with pump - 2 x ice water pumps - Brewing water pump - 2 water coolers - Expansion tank with control cabinet for NH3 separator and compressors 1 and 2, with SIMATIC MULTI PANEL touch control Additional title: refrigerant ammonia Brew water flow: 5 m3/h 2 bar Ice water flow: 15 m3/h 2 bar Refrigerant capacity: 85 kg Ammonia Compressor capacity: 145 m³/h Power: Q0: 2 x 119 kW Operation / Control: Siemens S7 Dedpfx Aoxbn Upsddswf Features: 2 x compressors: 145 m³/h, 26 kW with Frequency Converter, 37 kW nominal output; ammonia separator mounted on frame, with brewing water-cooler and ice water-cooler; air condenser on frame 3 x 2.95 kW; heat-exchanger for recovery with pump; 2 x ice water pumps ( 2.2 kW, 15 m3/h, 2 bar ); brewing water pump ( 1.1 kW, 5 m3/h, 2 bar ); expansion tank, max. permissible operating pressure: high pressure side: 22 bar, low pressure side: 16 bar

Condition: like new (used), Year of construction: 2022, operating hours: 105 h, functionality: fully functional, Haas ST50 Horizontal Turning Machine Slant Bed Lathe. Bought new directly from Haas and installed in Early 2023. As a "last of line" model from Haas (which they've yet to make this size since), this machine is fully loaded and as you can see from the build list below it is very well spec'd. It also only has 105 hours use. Viewing advised and welcome at our workshop in Canterbury, Kent. Videos can be sent and or uploaded to Youtube also. Dwsdpfxexrf Stj Addof This machine and others we are selling are also listed else where. Please get in touch with us at Showan Hydraulics, Barham, Kent if you require any further details. £325,000 + VAT PRODUCT OVERVIEW • Maximum Capacity: 25.5" x 80" (648 x 2032 mm) • Spindle Bore: 8.5" (216 mm) • Swing Over Bed: 34.5" (876 mm) • Main Drive: 55 hp (41 kW) vector drive • Spindle Speed: 1200 rpm, 2-speed gearbox • Spindle Nose: Front and rear A2-15 • Chucks: 25" (635 mm) Manual 3-Jaw and 4-Jaw Chucks • Turret: 12-station bolt-on turret • Tailstock: Programmable servo with MT6 quill • Control System: 15" touchscreen interface with USB port, memory lock keyswitch, and colour remote jog handle • Additional Features: Rigid tapping and variable flow coolant pump _____ STANDARD FEATURES • Bolt-On Toolholder Kit: Comprehensive set of toolholders, sleeves, coolant block, and turning stick clamps for flexible setup. • 1200-RPM Spindle: Powerful 55 hp (41 kW) A2-15 spindle with 2-speed gearbox for optimal torque and speed. • Program Memory: 1 GB onboard memory for program storage and backup. • Coolant System: 95-gallon (360 L) tank with 3/4 hp (0.6 kW) pump del

Condition: used, X Axis 30.0 in 762 mm Y Axis 16.0 in 406 mm Z Axis 16.0 in 406 mm Read for inspect Ready for delivery Dwsdjiypzdopfx Addsf

Condition: used, Year of construction: 2016, feed length X-axis: 711 mm, feed length Y-axis: 406 mm, feed length Z-axis: 394 mm, Traverses X Y Z ; 711 x 406 x 394mm, Table size 864 x 381mm, table load 113 kgs, rapid feedrates 61m/min, spindle power 15Hp, spindle speed 15,000rpm, spindle taper BT40, 18 station ATC, Haas control, coolant, swarf auger. Dwedev Sut Ropfx Addsf

Condition: good (used), Year of construction: 2014, HAAS VF1 (2014) • Manufacturer: HAAS • Model: VF-1 • Year of Manufacture: 2014 • Machine Type: Vertical Machining Center Technical Data: • Travel (X / Y / Z): 508 x 406 x 508 mm (20” x 16” x 20”) • Table Size: 660 x 356 mm (26” x 14”) • Maximum Table Load: 1,360 kg (3,000 lbs) • Spindle Speed: Up to 8,100 RPM (optional 10,000 or 15,000 RPM) • Spindle Taper: 40 Taper • Spindle Power: 22.4 kW (30 HP) Vector Drive • Tool Changer Capacity: 20+1 (Carousel Type) • Rapid Traverse Rates: 25.4 m/min (1,000 in/min) • Cutting Feed Rate: 12.7 m/min (500 in/min) Dedpfx Adev Iywmodowf • Automatic Tool Changer: Yes • Coolant System: Standard Flood Coolant System • Control System: Haas CNC Control • Machine Weight: Approx. 3,630 kg (8,000 lbs)

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, machine/vehicle number: 1062021, controller manufacturer: HAAS/FANUC, spindle speed (max.): 10,000 rpm, number of slots in tool magazine: 40, TECHNICAL DETAILS Spindle speed max.: 10,000 rpm MACHINE DETAILS Dsdsxuidxjpfx Addowf Tool changer: 40-fold Tool holder: BT40 Control: HAAS/FANUC

Condition: excellent (used), Year of construction: 2012, Haas Vf4SS Year of manufacture 2012 Dsdpfx Adsxnpuwedswf 12,000 rpm BT 40 40+1 tool changer With 4th axis Renishaw Very good condition! Videos available.

Condition: ready for operation (used), Year of construction: 2011, Travel X/Y/Z: 1000mm/500mm/635mm, tool holder: BT40, spindle speed: 10000rpm, tool positions: 40, control: Haas, spindle hours: approx. 4500h. 3-axis robot System 3R WorkPartner, year of manufacture: 2005, transfer weight: 80kg, stroke: 1500mm, pallet positions: 20. Including System 3R GPS 240 zero-point clamping system, tool measurement, tool breakage control, Renishaw 3D probe, and oil mist extraction. Documentation available. An on-site inspection is possible. Dwedexg Riaepfx Addef

Condition: used, Model: David 200 Dehairing And Flaming Machine Slaughter performance approx. 40-50 pigs/hour Pigs up to approx. 270 kg Machine body in hot-dip galvanized or stainless steel design Built-in control cabinet Roller equipped with 36 special clubs Electrical power: 5.5kW Installation dimensions of the machine in cm: Width: 240 Length: 340 Dodpfxotq T Tke Addswf Height: 250

Condition: used, TECHNICAL DETAILS - Number of axes : 3 - Number of spindles : 2 - Number of turrets : 1 MAIN SPINDLE - Spindle nose : A2-6" - Spindle power : 22 [kW] - Spindle speeds : 3400 [rpm] - Max. bar diameter : 76 [mm] - Max. turning diameter : 298 [mm] COUNTER-SPINDLE - Spindle nose : A2-5" - Spindle speeds : 6000 [rpm] - Rapid traverse rate : 10 [mm/min] TURRET 1 - Number of positions : 12 - X/Z stroke : 213/572 [mm] - Tool type : BMT65 POWER SUPPLY - Supply voltage : 400 [V] - Total installed power : 30 [kW] WEIGHT & DIMENSIONS - Machine floor space : 3630/2290 [mm] - Machine height : 2340 [mm] - Machine weight : 4536 [kg] MACHINE HOURS - Number of hours under power : 622 [h] - Number of working hours : 137 [h] EQUIPMENT - CNC : HAAS - Interface : Ethernet / RS232 / USB / PCMCIA - Interactive programming - Coolant tank Dedpfx Aoxlk I Tjddowf - Chips conveyor - Tool probe - Electric transformer - Number of fixed tool holders : 9 - Chuck 3 jaws : 2

Condition: excellent (used), Year of construction: 2022, Technical Specification of HAAS UMC-750 (2022) • Manufacturer: HAAS • Model: UMC-750 Dsdpfx Adov Izg Nsdjwf • Year of Manufacture: 2022 • Machine Type: 5-Axis Universal Machining Center Technical Data: • Travel (X / Y / Z): 762 x 508 x 508 mm (30” x 20” x 20”) • Table Size: 630 mm diameter (24.8”) • Maximum Table Load: 300 kg (660 lbs) • Spindle Speed: 12,000 RPM (optional 15,000 RPM) • Spindle Taper: 40 Taper (inline direct-drive) • Spindle Power: 22.4 kW (30 HP) vector drive • Tool Changer Capacity: 30+1 (optional 50+1) • Rapid Traverse Rates: 30.5 m/min (1,200 in/min) • Cutting Feed Rate: 12.7 m/min (500 in/min) • B-Axis Travel (Tilt): +110° to -35° • C-Axis Travel (Rotation): 360° continuous • Automatic Tool Changer: Yes • Coolant System: Standard flood coolant with optional Through-Spindle Coolant (TSC) • Chip Management: Programmable chip auger or conveyor • Control System: Haas CNC Control with Wi-Fi and Ethernet connectivity • Machine Weight: Approx. 6,350 kg (14,000 lbs)• 25 micron filter • Chip conveyor belt • Spindle center coolant pressure 300 psi • Wireless tool and workpiece probe • Side tool changer, ISO 40 taper, 30+1 tools • Synchronized threading • Rotary scale

Condition: used, Type: David Dehairing And Flaming Machine Slaughter performance approx. 40-50 pigs/hour Pigs up to approx. 270 kg Machine body in hot-dip galvanized or stainless steel design Built-in control cabinet Roller equipped with 36 special clubs Electrical power: 5.5kW Installation dimensions of the machine in cm: Dwedsg Swz Hjpfx Addsf Width: 240 Lenght: 340 Height: 250 Delivery time: after advanced payment, the machine is generally refurbished and ready for delivery