Used Hardness Test for sale (11,581)

Condition: excellent (used), Pfeiffer Pfeiffer Vacuum HLT 560 Helium Leak Detector Professional Leak Testing, Sniffer & Vacuum Operation Description: For sale is a professional helium leak detector Pfeiffer Vacuum HLT 560. The device is designed for highly precise leak detection using helium and is typically used in industry, manufacturing, quality assurance, laboratories as well as technical service. It is suitable for safe detection of even the smallest leaks. The HLT 560 operates using mass spectrometry and can be used in both vacuum and sniffer modes. With the sniffer probe, leak locations can be specifically pinpointed, while in vacuum mode, entire assemblies or systems can be tested. An integrated turbopump and forepump make the device a complete, mobile test system. Applications (examples): - Leak testing of components and assemblies - Testing of vacuum chambers, pipelines, valves, heat exchangers - Quality control in production - Service and maintenance work on vacuum equipment Technical Data: Manufacturer: Pfeiffer Vacuum Model: HLT 560 Fjdpfxoyaxu So Adasfw Test gas: Helium Measuring principle: mass spectrometric helium leak detection Operating modes: vacuum operation / sniffer operation Reference leak rate: (7.4 ±15 %) × 10⁻⁷ mbar·l/s Dimensions (approx.): Height: 110 cm Width: 50 cm Depth: 60 cm Interfaces: RS232, RS485, Relay I / II, Gauge port Power supply: 230 V / 50 Hz Power consumption: approx. 400 VA Weight: approx. 44 kg Condition: used Scope of delivery: (see picture) (Specifications and information subject to change and error!) Further questions can gladly be answered for you by phone.

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, Safety Tester for High Voltage Test Station - EATON Sefelec 506-S The device was purchased in 2023 and is in excellent condition. The SEFELEC 506-S test device for electrical safety testing, an EATON next-generation model, is based on ARM dual-core technology components and is DSP-controlled. This technology offers the operator optimal stability and repeatability of measurements. The high precision and measurement speed are tailored to meet the requirements of quality assurance in production and incoming goods inspection. The sequence function facilitates the operation of the SEFELEC 506-S test station when integrated into a test stand or test bench. The new SEFELEC model series features a 7" touchscreen that impresses with its simple and intuitive operation. - Standard interfaces: Ethernet / RS232 / USB / PLC - Optional: IEEE488-2 interface - Dual safety circuit SIL2 - Automatic selection of test series - Sequence mode for combining multiple consecutive tests Withstand voltage at 5kVAC 500VA and 6kVDC Detection modes by current threshold or current fluctuations (ΔI) Burn function mode without current detection Megohmmeter 200 GΩ, test voltage from 20 VDC up to 1000 VDC Optional: 2TΩ range PE testing at 32A - 8VAC, measurement 0 ... 1Ω Optional: testing current 50A Programmable test ramps Ffjdpfxexqxt Io Adasw Ramp up, hold, ramp down Multi-ramp mode, up to 7 steps TFT touchscreen 7", 16 million colors, for programming and display of current tests and results Integrated ARM Dual Core Control & 3D NAND technology for optimal precision, stability, and repeatability Integrated DSP for higher test speeds Large internal memory for storing configurations and test results Fully compliant with IEC 61010-2-034 (Safety requirements for electrical equipment for measurement, control, and laboratory use – Part 2: Particular requirements for testing and measuring circuits for insulation resistance and dielectric strength) Shipping is possible upon arrangement. #8312-1

Condition: excellent (used), Year of construction: 2024, functionality: fully functional, Safety tester with scanner for high-voltage test station - EATON Sefelec 506-S - EATON Sefelec 64-SC The devices were purchased in 2023/2024 and are in top condition. Ffsdjxqxw Tepfx Adaew The SEFELEC 506-S test device for electrical safety testing, an EATON next-generation model, is based on ARM dual-core technology components and is controlled via DSP. This technology offers the operator optimal stability and repeatability of measurements. The high accuracy and measurement speed are tailored to the requirements of quality assurance in production and incoming goods inspection. The sequence function facilitates the operation of the SEFELEC 506-S test station when integrated into a test stand or test bench. The 7” touchscreen of the new SEFELEC model series impresses with simple and intuitive operation. - Standard interfaces: Ethernet / RS232 / USB / PLC - Optional: IEEE488-2 interface - Dual safety circuit SIL2 - Automatic selection of test series - Sequence mode for combining multiple consecutive tests Voltage withstand at 5kVAC 500VA and 6kVDC Detection modes by current threshold or current fluctuations (ΔI) Burn function mode without current detection Megohmmeter 200 GΩ, test voltage from 20 VDC to 1000 VDC Optional: 2TΩ range PE measurement at 32A - 8VAC, measurement 0 ... 1Ω Optional: test current 50A Programmable test ramps Ramp up, hold, ramp down Multi-ramp mode, up to 7 steps TFT touchscreen 7”, 16 million colors, for programming, as well as for displaying ongoing tests and results Integrated ARM dual core control & Nand 3D technology for optimal accuracy, stability and repeatability Integrated DSP enables higher test speeds Large internal memory for storing configurations and test results Completely compliant with IEC 61010-2-034 (safety requirements for test and measurement equipment for insulation resistance measurement and equipment for voltage withstand testing) Shipping is possible subject to prior agreement. #8312-2

Condition: excellent (used), Primus Engineering Type: DST 350 This test device was designed to carry out IP protection class tests “dust” according to Ffedpfx Aort U Nuedasw e.g. DIN 40050 Part 9 and DIN EN 60529. The test device is intended for testing technical components under the influence of dust and negative pressure within the limits specified in the technical data. Operation / HMI Control panel with screen and buttons Manual controllers Stored test sequences Integrated vacuum circuit with flow measurement Technical data: Total electrical output: Max. 5 KW Connection voltage: 400V/50HZ 3-Ν/ΡΕ (16AEEC socket) Dimensions: Width approx. 920 mm Depth approx. 710 mm Height approx. 1,770 mm Dimensions of test chamber: Width approx. 700 mm Depth approx. 650 mm Height approx. 770 mm Volume approx. 350 I Mass: approx. 200 kg Vacuum: 0 to -100 mbar Suction air flow: 0 to approx. 5 l/min Working climate range: Temperature: +12 °C to +30 °C Humidity: 25% rel. H. to 75% rel. F., non-condensing Protection class tests according to DIN 40050 Part 9 and DIN EN 60529 (VDE 0470 Part 1) Dust test: Dust-protected ΙΡ5Χ and IP5KX Dust-tight ΙΡ6Χ and IP6KX with and without vacuum Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data, information is subject to change!) We are happy to answer any further questions you may have over the phone.

Condition: good (used), functionality: fully functional, total height: 3,300 mm, table height: 850 mm, installation height: 1,000 mm, total width: 850 mm, total length: 950 mm, pressing force: 50 t, overall weight: 4,500 kg, The cylinder has been completely overhauled. Ffjdpfsyh Rfpsx Adasw

Condition: excellent (used), Year of construction: 1995, machine/vehicle number: 47070001, For separating and separating light and impurities Drum diameter x width: 1,400 x 1,200 mm Fodpfsqi Eh Hsx Adasfw Vibrating feeder Blower with V = 7,000 m³/h incl. steel construction, platform, railings, etc.

Condition: excellent (used), Year of construction: 1975, Breaking device . bar material dia. 10 - 45 mm Fjdpfx Adoit Ev Tsaofw bar material stranggepreßte NE-Stangen weight of the machine ca. 3 t Bending and breaking device simple and sturdy device to detect internal flaws in extruded non-ferrous metal rods +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: used, Year of construction: 1997, Technical details: Fodex Uzvvopfx Adasfw max. wheel diameter: 5 - 350 mm max. module: 20 weight of the machine ca.: 0,8 t min. module: 0,5 dist. between centers: 5 - 750 mm table diameter: 260 mm z-axis: 600 mm y-axis: 185 mm max. helix angle: 45 °

Condition: excellent (used), Zwick / Roell Type: Z020 Allround-Line BT1-FR020TN.A50 Zwick / Roell Materials Testing Machine 20 kN Tensile & Compression Testing testXpert III For sale is a high-quality Zwick / Roell materials testing machine for professional tensile and compression testing of materials and components. The machine is suitable for metals, plastics, rubber, and many other materials and is typically used in laboratories, quality assurance, research, and education. Control is via PC using Zwick/Roell testXpert III software (data carrier & documentation included). Technical Data: Rated test force: 20 kN Test direction: tensile & compression Power supply: 230 V / 50–60 Hz / single-phase Power consumption: approx. 2.1 kVA Weight: approx. 150–180 kg Dimensions: approx. 856 × 650 × 1,545–2,114 mm Technical data (according to documentation & nameplate) Mechanics / Testing Nominal force: 20 kN Testing direction: tensile & compression Max. test frequency: 0.5 Hz Crosshead: servo-electric Positioning accuracy: < 1 µm Speed range: 0.0005 – 1,000 mm/min Dimensions & Weight: Total height: approx. 1,545 – 2,114 mm (depending on crosshead position) Total width: approx. 856 mm Total depth: approx. 650 mm Working area width: 440 mm Weight: approx. 150 kg (base unit) approx. 180 kg with typical configuration Electrical Data Power supply: 230 V AC Phases: single-phase (1PH, N, PE) Fsdpsx Up Igefx Adasfw Mains frequency: 50 / 60 Hz Current consumption: approx. 8–10 A Power consumption: approx. 2.1 kVA Plug: Schuko (CEE 7) Measuring & Control Electronics: Internal data acquisition: 500 Hz Data transmission to PC: adjustable 10–100 Hz Interface: RS232 (COM) Electronics housing protection class: IP32 Important note: 'The table shown in the photos is not included in the sale.' Condition: used Scope of delivery: (see picture) - Zwick / Roell materials testing machine (20 kN) - Electronics unit - PC workstation (monitor, PC – please see photos for condition) - 2 measurement modules (Delock units) - Zwick/Roell testXpert III software (data carrier) - Original operating and technical documentation - Various connection and interface cables (Specifications are subject to change and errors excepted!) If you have any questions, we will be pleased to assist you by phone.

Year of construction: 1985, condition: repair required (used), functionality: limited functionality, Schenk-Trebel Material Testing Machine Type RME 250 kN • Load frame and drive by Schenk Trebel, year of manufacture 1985, overall height approx. 3.3 m. Crosshead travel approx. 2 m • Modernisation around late 2003: Equipped with “testControl” control electronics by ZwickRoell • Upgrade in 2010: Universal extensometer system MultiXtens by ZwickRoell, with swivelling device and two pairs of measuring heads (see photo) and a new testControl module • Info: The testControl module operates with the current "testXpert III" software by ZwickRoell (one license for testXpert III version 1.51 is included in the price) • Temperature chamber retractable into the test area of the machine (see photo), year 2006 by RS-Simulatoren Prüf- & Messtechnik, heatable up to approx. 200°C, coolable with liquid nitrogen down to approx. -40°C • Load cells: 250 kN and 50 kN (currently installed, see photo); additionally: 5 kN, 1 kN, and 500 N (see photo) • 2 wedge-type specimen holders (see photo) Condition of the machine The machine was used for tests in recent years up to early 2026. The 50 kN load cell and the crosshead travel sensor were used (both sensors: last calibration on 06.05.2024 including standard inspection work). A defect in the servo amplifier for the drive (component within the testControl module) has, since around autumn 2025, led to frequent connection losses to the software and to drive shutdowns until hardware and software are restarted. The servo amplifier or the entire testControl module must be replaced (cost details can be requested from the supplier). The 250 kN load cell was last calibrated on 11.02.2021 but has not been used for measurements since then. The other load cells, the MultiXtens system, and the temperature chamber have not been used or calibrated in recent years. Ffsdpfxjyhb Rle Adasw The two hydraulic clamping devices shown installed in the machine in the images will be removed and retained by the vendor.

Condition: excellent (used), Year of construction: 1997, functionality: fully functional, machine/vehicle number: 2716, Equipment: documentation/manual, VBF Stahl BL 500 Hardcover bookline Machine number 2716 Built in 1997 Size max 380x270 mm Speed max 1500-3360 c/h Book block thickness max 70 mm Size min 100x100 mm Book block thickness min 2 mm Size max 270 x 380 mm min 85 x 100 mm product thickness max 70 mm min 5 mm Speed max 3.300 c/h Equipment • CAC/COS • main engine frequenzcontroled • automatic central lubrication system • Maschinenrahmen for 5 stations • infeed with IR warm up • automatic thickness control • rounding and backing station • 5 stations • Zeichenband-Anklebeeinrichtung • gluing unit • gauzing and moll station • gluing unit • headbanding and backlining station • pressing station • Pressing station • cover magazin • cover pile belt • cover rounding station • book pressing and forming machine EP 508 • delivery to the right • standard equipment • 1 set of operater manuals • 1 spare part catalogue • 1 set of electrical diagrams Ffsdsycqfnopfx Adajw • 1 set of standard tools • standard equipment • Sigloch Stacker Price 95.000,00 € Condition: working condition with all functions

Condition: excellent (used), Vötsch Type: VC³ 4018/S Vötsch VC³ 4018/S Climate Test Chamber – Li-Ion CO/CO₂ −42 to +150 °C 400 V Air-cooled For sale is a temperature and climate test chamber from the renowned German manufacturer Vötsch Industrietechnik GmbH, model VC³ 4018/S, year of manufacture 2012. The unit is specifically equipped for testing lithium-ion batteries and features CO monitoring as well as CO₂ inertization for enhanced operational safety. Important Note: Due to these safety features, the test chamber is software-limited to a temperature range of −42 °C to +150 °C. The chamber is ideally suited for: - Li-Ion battery testing - Electronics and assembly testing - Temperature and climate stress tests - Development and quality assurance tasks Technical Data: Test chamber dimensions: Width 580 mm x Depth 450 mm x Height 750 mm External dimensions: Width 870 mm x Depth 1550 mm x Height 1800 mm Test chamber volume: 190 liters Feed-throughs included as standard: R1: Ø 125 mm L1: Ø 50 mm Data for temperature tests: Temperature range: -42°C to +150°C Temporal temperature deviation: ± 0.1 to ± 0.5 K Spatial temperature uniformity: ± 0.5 to ± 1.5 K Temperature change rate: Heating 4 K/min Cooling 4 K/min Max. heat compensation: 2300 W Data for climate tests: Temperature range: +10 to +95 °C Dew point range: -3 to +94 °C Humidity range: 10 to 98 % RH Ffodpfx Aex Slm Hedaew Temporal temperature deviation: ± 0.1 to ± 0.3 K Spatial temperature uniformity: ± 0.5 to ± 1.0 K Temporal humidity deviation: ± 1 to ± 3 % RH Heat compensation: 400 W Operating data: Test chamber lighting: Halogen bulb 2 x 24V, 50W 3/N/PE AC 400V ±10% 50 Hz Rated power: 4.1 kW Rated current: 14 A Refrigerant: R-404A Weight: 470 kg Important Safety Information for Buyers! The following servicing steps are performed on our offered chambers in advance: 1. Function check and replacement of necessary components 2. If required, new refill with legally compliant refrigerant 3. Leak test with certification 4. After successful inspection, the chambers undergo a documented test run. Condition: Used Scope of delivery: (See image) (Specifications and technical data are subject to change and errors are excepted!) If you have further questions, we are happy to assist you by phone.

Condition: used, Test pump, pressure test device, measuring device, pressure test pump -Manufacturer: Junginger, mobile extraction device -Pressure display: 40 bar Fedpfjfnaaijx Adajfw -Dimensions: 790/480/H775 mm -Weight: 47 kg

Condition: used, Test clamp for electricity Ffjdpfjb Uhr Tex Adajw -Number: 3x available -Price: per piece -Weight: 4.2 kg

Condition: used, Gauge block box, gauge blocks, parallel gauge blocks, test pin set, test pins, plug gauge Fedpfxeg T I Nhs Adajfw -Manufacturer: Cary, plug gauge test pin set: 3.01 - 3.49 mm -Content / nominal dimensions: see photos -Dimension box: 135/85 / H60 mm -Weight: 0.3 kg

Condition: used, Test pump, pressure device, measuring device Fodpfx Adochyxueaefw -with: pressure display -Max. Pressure: 60 bar -High pressure hose -Number: 2x devices available -Price: per piece -Dimensions: 490/165/H260 mm -Weight: 7.2 kg

Condition: good (used), test mandrel, tool holder, milling holder, milling tool -Manufacturer: Bahmüller, boring bar -Length: L= 158.406 mm -Radius: R= 19.937 mm -Recording: HSK50 -Dimensions: Ø 50 x 183 mm Fodovz Urxopfx Adaefw -Weight: 1.6 kg

Condition: used, Test pump, pressure device, measuring device, pressure pump, pressure test pump -Test pump: mobile pressure device Fjdpfxoh N Tims Adaofw -Pressure gauge: 16 bar -Container: volume 95 liters -Dimensions: 1270/490/H1060 mm -Weight: 89 kg

Condition: used, Hardness tester, hardness measuring machine, hardness tester, hardness tester, impact hardness tester, hardness comparison plate, test block, calibration and adjustment plate -Manufacturer: SiB, hardness reference block test block -Type: 199HBW 5/750 Fsdpfx Ajk Egkwodajfw -Dimension box: 180/170/H35 mm -Weight: 1.4 kg

Condition: used, Test device, test device for personal earthing, Safety Pips -Manufacturer: Wolfgang Warmbier, test device for personal earthing, original packaging -Type: Safety Pips -Article No.: 7100.181 -Operating mode: Battery operation 9V -Dimensions box: 115/110/H70 mm -Weight: 0.2 kg Ffodetuyc Djpfx Adajw

Condition: used, Test pump, pressure device, measuring device, pressure pump, pressure test pump -Manufacturer: Ridgid, mobile pressure test pump -Type: 1425 pump ss: 50bar/725psi -Dimensions: 720/170/H300 mm -Weight: 10 kg Ffedoilq Hmopfx Adajw

Condition: good (used), Hard cover assembly table The device is fully functional and in very good condition. Ffedpfevkt N Ujx Adaow Technical data: Max. binding width 810mm. Power supply: Pneumatic Weight: 140 kg Equipment: – elements for fixing the cardboard – module for wrapping the cover

Condition: new, Year of construction: 2026, functionality: fully functional, The POWER Test indicator is designed to check the clamping force of tools in the spindle of machine tools. Insufficient clamping force of the tool within the spindle can lead to poor machining quality and potential spindle damage. In clamping systems utilising disc springs, any spring failure results in a significant reduction of the clamping force. The POWER Test indicator provides a straightforward method to verify whether the clamping force has decreased to a critical level. Technical Specification Type: MUS02 Measurement Range: 10 – 30 kN Measurement Method: Incremental Accuracy: ±3% Repeatability: 0.3% Display: Digital, resolution 0.1 kN Units: kN Maximum Permissible Load: 75 kN Ffjdoyak I Dspfx Adaew Ambient Temperature: 10 °C – 30 °C Power Supply: 9 V battery Standard Adapters: SK40 and SK50

Condition: good (used), Year of construction: 2002, Clampable cutter head type (max.) 460 mm Cutter head weight (max.) 150 kg Mounting disc diameter for cutter heads (Ø) 360 mm Mounting cone for cutter heads Nominal diameter Ø 58,227 mm travel -z axis 200 mm diagram-drawing enlargement ±10 - ± 500 µm weight of the machine ca. 2,3 t dimensions of the machine ca. 2 x 1,5 x 2,03 m In the manufacturing process for spiral-toothed bevel gears, the quality of the gear cutting gear cutting tools used plays a decisive role. Particularly in high gear cutting quality and a long service life can only be achieved with precisely can only be achieved with precisely adjusted cutterheads. The Oerlikon cutterhead setting and testing device CS 200 enables quick and easy setting of the individual knives and simple adjustment of the individual knives, it checks the position and documents the measurement results. The measuring sequence on the CNC-controlled testing device is partially automated: The individual actions for carrying out the actions for carrying out the sequence are displayed on the screen via the operator guidance. The positioning of the individual knives in the cutter head and the height of the knife tips is largely automatic thanks to a special sequence and is simultaneously documented by means of a run-out diagram. A subsequent measuring sequence checks the radial position of the inner and outer cutting edges of all knives in the cutterhead. If individual test parameters on the knives do not correspond to the the tolerance specifications, this can be individually repositioned. The combination of semi-automated setting sequence, operator-guided set-up actions and automatic operator-guided set-up actions and automatic measuring sequence, Ffsdpjw N S E Aofx Adasw cutterheads can be can be set conveniently, quickly and with high precision. Operator-guided setting and test sequence - Graphic display of the cutter head design and the measurement results with tolerance check - Instructions for the operator in plain text Instructions for the operator in plain text (without coded information) - Simple assignment of the measurement results to the knives - Documentation of the setting and measurement results via printer- Setting and test sequence suitable for ARCON®, RSR, Spirapid, SPIRON®, TRI-AC® types - Interface for neutral data

Condition: used, Year of construction: 2000, Sold for parts, ADU card missing. Automatic tablet testing system - Laboratory measuring equipment - Tablet tool Enables testing of: Hardness Diameter Thickness Weight Precision balance Sartorius WZ64S Scale : 10 à 50 g Unit : mg / 0,5 mg / 0,1 mg adjustable Thickness Drive: stepper motor. Measuring principle: linear potentiometer. Unit of measurement: mm or inch. Tolerance: +/- 0.1 mm Hardness Drive: stepper motor. Measurement: load cell (lmz) Measurement principle: dynamometric gauge Unit: N, Kp or Sc Diameter Drive: stepper motor. Measuring principle: stepper motor. Unit of measurement: mm or inch. Scale: 3 - 18 mm / 3 - 30 mm (manual) Tolerance: +/- 0.1 mm Tension : 100 / 240 V, 50Hz / 60 Hz The UTS is a universal, fully automated testing system developed for use in industry. This tool is the approved model of a series of test systems that have been tested over many years. It was developed in close collaboration with the pharmaceutical industry. The UTS 4.1 can be used to test round, oval, square and oblong tablets, as well as many special shapes. For delicate oblong tablets, the proven oblong centring system (OZB) can be integrated. All parts requiring cleaning can be removed quickly and easily without any tools. The test system can be supplemented with various options, such as a distributor and/or sample collector with a different number of stations. Fjdpsx Rz I Defx Adaofw Use the UTS as a laboratory tester or an online control device connected to a tablet press. Sampling can be triggered either in the production machine or using the TTS11 software.