Used Hardware Punch for sale (1,784)

Condition: good (used), Year of construction: 1995, Technical data: - Pressure capacity 250 KN - max. sheet thickness 6 mm - max. punching diameter 90 mm - stroke 42 mm - throat 500 mm Laodpfx Aashikdaonek - maximum stroke rate 200 H/min - connected load 4 kW - space requirement LxWxH 1000 x H 1750 x D 1400 mm - weight approx. 1600 kg

Condition: refurbished (used), functionality: fully functional, Year of construction: 2016, machine/vehicle number: 403/FL06, laser power: 2,000 W, laser wavelength: 1,070 nm, punching force: 28 t, punching diameter: 105 mm, sheet thickness steel (max.): 15 mm, sheet thickness aluminum (max.): 6 mm, table length: 3,100 mm, table width: 4,250 mm, table height: 900 mm, No reserve price - guaranteed sale at the highest bid! Lodpfx Ajvwbrwsanjak Machine was overhauled by Boschert in 2022! TECHNICAL DETAILS Punching force: approx. 2 x 280 kN (28 t) Punching throat: approx. 1,750 mm Max. punching diameter: 105 mm (any shape within 105 mm) Max. sheet thickness: 6 mm (clamp opening) Max. stroke height: 90 mm (continuously programmable) Thread cutting: M3 - M12 Slide stroke: 160 mm Stroke rate (for sheet thickness 2 mm) Travel path 0.1 mm: 280 strokes/min (385 with fast hydraulics) Travel path 2.0 mm: 200 strokes/min (275 with fast hydraulics) Travel path 25.0 mm: 125 strokes/min (175 with fast hydraulics) Table dimensions Table width left + right: 4,250 mm / 3,250 mm Table depth: 3,100 mm Table height: 900 mm Laser source Model: XFocus 2000 Max. connected load: 7 kVA (100% duty cycle) Operating temperature: 5 - 40 °C (store frost-free) Air humidity: 10–95% Storage temperature: -40 - 75 °C (without water) Laser protection class: Class 4 according to DIN EN 60825-1 Sheet thicknesses Mild steel (maximum): 15 mm Mild steel (recommended): 0.5 - 10 mm Alloyed steel (maximum): 8 mm Alloyed steel (recommended): 0.3 - 6 mm Aluminum (maximum): 6 mm Aluminum (recommended): 0.3 - 4 mm Fiber laser Output power: 2,000 W Wavelength: 1,070 nm (± 10 nm) Modulation rate: 5 kHz Pilot laser power: < 1.0 mW Optical fiber: fiber cross-section 100 µm Cooler Max. connected load: 9 kVA Number of cooling circuits: 2 Design point: 33 °C Air volume: 4,000 m³/h Temperature range (operation): 10 - 40 °C (store frost-free) Storage temperature: -40 - 64 °C (without water) Coolant: DI water Pressure: max. 2 bar Flow rate: laser cooling circuit 28 l/min, head circuit 2 l/min Coolant water temperature: laser 21 °C (± 1 K), head 25 °C (± 1 K) Cooling capacity: 5.5 kW Dimensions (L x W x H): 626 x 807 x 1,362 mm Mass: 340 kg (without water filling) MACHINE DETAILS Overall width: 6,500 mm Overall depth: 5,000 mm Overall height: 2,100 mm Drive power: 20 kVA (25 kVA with fast hydraulics) Machine weight: 16,200 kg Hydraulic oil filling: 115 l (160 l with fast hydraulics) Laser dimensions (L x W x H): 1,250 x 810 x 1,500 mm Laser mass: approx. 300 kg

Condition: ready for operation (used), Year of construction: 2004, Max. punching force: 500kN, max. punching stroke: 200mm, die support dimensions: 13,200x1500mm, conveyor belt dimensions: 7435x1995mm, max. punching area: 1800x750mm, max. strokes: 80/min, connected load: 34kVA, length: 6500mm, width: 3900mm, height: 2900mm, net/operating weight: 7.8/10.2t, operating hours: 52,680h, with documentation. Equipped with extraction system, rotatable tool enabling nesting, tension-free unwinding possible. The machine has been regularly maintained, hydraulic unit integrated into the machine frame, with PC control. An on-site inspection is possible. Laodpfx Aaow Sxyfenek

Condition: ready for operation (used), Multifunction punch Schüco 296862, year not known Lodpsd R S Huefx Aanjak

Condition: excellent (used), Year of manufacture: 2002 Overhaul: 2010 Type: CNC 607GK Control: Eckelmann (PC control) Operating hours: 14,136 h Table: 718 x 680 mm Travel x-y-z: 780 – 620 – 360 mm Spindle mount: HSK 63F Speed: up to 24,000 rpm Feed rate: up to 8,000 mm/min Accessories: Spindle cooling Condition: Good Suitability: Machine is particularly suitable for light machining and for aluminum and wood Laodpjwhwwiofx Aanjk Power supply: 20 kW Machine dimensions: 1,700 x 3,000 x 2,500 mm Weight: 1.6 t

Condition: used, used, great condition, little usedMake HettichType Blue Max mini PMPneumatic drill feedStorage location 97447 Gerolzhofen, freely loaded, unpackedHandover in the current condition as seen,without guarantee and guarantee Lasdpfxjvwf Dqj Aanek

Condition: good (used), Sold is a die cutter from the company Bruderer. Model BSTA 20. The press pressure is 20 tons. For further technical questions please feel free to contact us. Lajdpfx Asi Ey Ahoanjk

Condition: excellent (used), Year of construction: 2006, punching force: 28 t, punching diameter: 105 mm, throat depth: 1,500 mm, Boschert TWIN 1500x2000 Rota-Index TRUMPF quick-change tool system Station 1: Rotation with index option for Boschert Multitool Max. punching diameter 105 mm. Tool continuously rotatable. Station 2: Max. punching diameter 105 mm with Boschert Multitool Revotool insert option. Incl. 8-way tool holder. Laodpowdmwqefx Aanek Punching force: Yes, 280 kN (28 tons). Travel range x- 2050 mm (repositioning up to 9999 mm). Y- 1580 mm. Punching arm reach: 1750 mm. Tool system: Trumpf Gr1-3 (105 mm) and Boschert Revotool. Labod 32060 graphic control system / workshop programmable. Max. sheet thickness: 6 mm (clamp opening). Max. stroke height: 90 mm, continuously programmable up and down. Table width left + right: 2250 mm each Table depth: 3250 mm Table height: 900 mm Total width: 4900 mm Total depth: 4800 mm Total height: 2080 mm Drive power: 20 kVA Machine weight: 15,000 kg Hydraulic oil capacity: 160 l Color: Blue RAL5017/Light gray RAL7035 Machine built in 2006 Ball transfer table Slug extraction system Fast hydraulics Very well-maintained condition With accessories

Condition: ready for operation (used), Year of construction: 2000, Max. punching force: 300kN, max. punching stroke: 200mm, max. punching area: 1800x750mm, connected load: 11kVA, length: 4800mm, width: 3400mm, height: 2800mm, net/operating weight: 10/13t, operating hours: 2818h, with documentation. The control was renewed in 2022. The machine has been regularly maintained, hydraulic unit integrated into the machine frame, with PC control. An on-site inspection is possible. Lajdow Sxylepfx Aanok

Year of construction: 1995, condition: ready for operation (used), Multifunction punch Schüco 296817, built 1995 Lodod R S Hropfx Aanoak

Condition: good (used), Year of construction: 1990, functionality: fully functional, punching force: 22 t, sheet thickness steel (max.): 6 mm, Murata Weidemann C 2000 Lodpfx Aotulrfjaneak

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2002, operating hours: 11,676 h, machine/vehicle number: KM-1148, laser power: 3,200 W, punching force: 22 t, punching diameter: 76 mm, sheet thickness (max.): 8 mm, workpiece weight (max.): 230 kg, workpiece length (max.): 1,650 mm, workpiece width (max.): 2,585 mm, No reserve price - guaranteed sale at the highest bid! Machine including SheetMaster and TrumaGrip TECHNICAL DETAILS Punching force: 22 tons Control: Siemens Sinumerik 840 D Punching working area: 3,085 x 1,740 mm Combined working area: 2,585 x 1,650 mm Max. sheet thickness: 8 mm Max. workpiece weight: 230 kg Max. punching diameter: 76.2 mm Rapid traverse X / Y / simultaneous: 90 / 60 / 108 m/min Tool holder: Hydraulic mono tool holder, 360° rotation Holder: Programmable for repositioning processes Chip handling: Chip bucket Laser unit: High-frequency excited CO₂ laser TruFlow Laser working area: 3,085 x 1,650 mm Laser power: 2,700 Watt Laser cutting heads: 5" lens, 7.5" lens, cutting head quick-change device Distance control: DIAS Cutting technology: HI-LAS high-pressure cutting Lsdsv Am Twopfx Aaneak Functions: AutoLas, ContourLas Laser control: TASC 3 MACHINE DETAILS Width: 2,400 mm Length: 8,700 mm Height: 7,800 mm Total weight: 22,500 kg Switch-on time: 59,2344 h Laser cutting time: 11,676 h EQUIPMENT - Parts chute 500 x 500 mm, sensor-monitored - 2 good parts boxes - AutoLas - Ejection cylinder on laser chute - Automatic tool length compensation - Tool spray lubrication - Punch slug extraction - 2nd lubricant container - Multi-beam Light barriers - Quick shutdown hydraulics - Extraction and compact dust extractor - MultiTool function - Thread forming function - Vibration-damped installation - Brush tables - Chip conveyor with tilting container - Standard equipment SheetMaster 1606 - Loading station with spreading magnets - TRUMAGRIP scrap skeleton disposal unit with scissor lift table - Sheet thickness gauge for double sheet control - Suction plate module - Parts conveyor belt A deposit of EUR 7,500 is required for transport security.

Condition: good (used), Year of construction: 2004, operating hours: 73,056 h, functionality: limited functionality, machine/vehicle number: A0060A0266, Machine operating hours: 73,056 h Max. punching force: 220 kN Punching working area: 2,535 x 1,280 mm Max. sheet thickness: 8.0 mm Total connected load: 29 kVA Last commissioned: March 2024 Standard equipment Machine • Sturdy C-frame • Coordinate guide with integrated linear magazine • 21 tool stations • 3 clamps • Automatic part chute 500 x 500 mm Punching head • Hydraulic single-tool holder, 360° rotation • Adjustable hold-down force • Programmable hold-down device • Spray lubrication for punches • Punch slug extraction Safety • CE mark • Multi-beam light barriers • Rapid hydraulic shutdown • Bowing detection Extended equipment • Brush table with loading and unloading aid • Height-adjustable, individually opening clamps • Reloading cylinder • Vibration-damped installation • Chip conveyor Available additional options • Trumalift Sheetmaster • Trumagrip 2500x1250 mm Laedpfxowduukj Aanek • Trumatool 40 • Trumasort R4 • Trumasort L The machine is available immediately. Due to the last commissioning more than a year ago, malfunctions may occur during commissioning. The sale is ex works: dismantling, removal, loading, and transport are at the buyer's expense.

Condition: good (used), functionality: fully functional, machine/vehicle number: 057400108, Manufacturer: Bobst, Switzerland Model: SP 142 Ledpfx Aew Rb Ebjansak Machine Category: Die Cutting Machine Machine Type: Autoplaten Year of Manufacture: --- (not specified) Machine Number: 057400108 Technical Specifications: - Max. Sheet Size: 1420 x 1020 mm - Min. Sheet Size: 700 x 500 mm - Speed: up to 4,500 sheets/hour (depending on job) - Power Supply: 380 V, 50 Hz Features: - Robust Swiss design - Mechanical control with side operator console - Pile feeder and delivery for continuous operation - Suitable for cartonboard and corrugated board - Proven model for packaging production

Condition: ready for operation (used), Year of construction: 2003, Max. punching force: 500kN, max. punching stroke: 200mm, max. punching area: 1800x750mm, connected load: 39kVA, length: 6500mm, width: 3900mm, height: 2900mm, net/operating weight: 7.8/10.2t, operating hours: 56,645h, with documentation. The machine has been regularly maintained, hydraulic unit integrated into the machine frame, with PC control. An on-site inspection is possible. Lajdpfjw Sxyrjx Aansk

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2011, operating hours: 97,000 h, laser power: 2,500 W, sheet thickness (max.): 6 mm, workpiece length (max.): 2,000 mm, workpiece width (max.): 1,500 mm, Submission of a bid obligates the buyer to collect the machine on time by 05/09/2025! The machine has been serviced by the manufacturer. TECHNICAL SPECIFICATIONS Power and Cutting Force Cutting force: 300 kN Power: 2.5 kW (CO₂) Workpiece Cutting elements to length: 3,020 × 1,500 mm Laser cutting length: 2,000 × 1,500 mm Max. sheet thickness: 6 mm Stations Turret station: 41 fixed and 4 rotatable stations MACHINE DETAILS Electrical Data Connected load: 400 V / 68.3 kVA Apparent power: 60 kVA Compressed Air Connection Compressed air connection: 8 bar Compressed air consumption: 48 m³/h Occupational Safety Width of protected area: 30 m Minimum safety distance: 1.36 m Machine reaction time + total fire protection wall reaction time: 320 ms Overrun time: 300 ms Machine braking distance: 180 mm Weight of the punching/laser machine: 30,000 kg EQUIPMENT Automatic part removal (suction cups) up to 45 kg Automatic sheet metal feed max. 3,050 × 1,500 mm Automatic bale output 1,500 × 400 mm Double loading ramp Light barrier Wire cutting kit Bale push sensor Chip extraction Conveyor for offcuts removal Separate lubrication for punching and threading tools Sheet bending sensors Punches included in the offer Loading of the machine can be arranged upon request. Lasdpfx Aasw Axa Uensk A large tooling package can be purchased for an additional 10,000 EUR.

Condition: like new (used), Year of construction: 2012, operating hours: 47 h, MACHINE WITH ONLY 47 working hours. Lodorcb Hqepfx Aaneak Tested by ERMAKSAN FRANCE. COMPLETE DATA CAN BE FOUND IN DOCUMENTS FANUC CONTROL

Condition: ready for operation (used), Punching force: max. 20 to stroke length: 16 mm strokes: 200, 300, 400, 600 1/min motor power: 4kW working ranges: transverse (x-direction) 1.000mm Laedoiknyhopfx Aansk longitudinal (y-direction) 500mm working area max. 500 x 1.000mm table area: 875 x 1.600mm (without outrigger) weight: approx. 4.500kg Power: see photo data sheet Big number of stamping units as accesoirs with the machine Machine can still be seen under power at the last working company

Condition: excellent (used), Year of construction: 2006, Bihler RM 40E stamping and bending machine Compact machine system for the production of stamped and bent parts from strip and wire. Quick tool clamping system User-friendly P CNC 4E machine and process control Compatibility with RM 35, RM40, and RM4 tools Item condition: very good Manufacturer's description, deviations possible. You are purchasing the machine as shown in the pictures. Type: RM 40E No. 27907 Year of manufacture: 2006 1x 184-01-0022.0 Basic machine RM 40 including central lubrication and pneumatic system including P-CNC 4E control according to installation plan 184-00-0085.3 including tool: 484 0027 2x 142-04-0347.0 Wide slides (items A9 and A16) 1x 142-55-0007.0 Angle lever unit with right lever (item A7) Without feeder, press, and center punch Ledpfx Ajg Inzksanjak including light barrier for personnel protection You can find more items - new and used - in our shop! International shipping costs on request!

Condition: ready for operation (used), A cart beam die-cutter Schön is available for die-cutting envelopes, leather, textiles, foams, rolls and sheets. Pressing force: 300kN, max. sheet format X/Y: 1400mm/1000mm, pressure plate rotation speed: 200°/s, repeat accuracy: +/-1°, return stroke speed: 200mm/s, machine dimensions X/Y/Z: approx. 4200mm/2500mm/2500mm, weight: approx. 5500kg. Documentation available. On-site inspection is possible. Lsdpfxjw Azuue Aanjak

Condition: excellent (used), Schroeder & Bauer WB 32-1 Universal Wire and Strip Bending Machine Wire Feed Plain Text Display Press Force Monitoring Wire Straightener Bosch Stripping Devices Bracket and Brush Motor with Attached W32/1-32 Tool Soundproof Cabin Barrels of Copper Wire with Punched Parts Control Cabinet Technical Specifications: Drive Power: 7.5 kW Speed (min. - max.): 40-250 rpm Press force / punching unit: 200 kN Longitudinal feed: 250 mm Longitudinal strip width: 50 mm Wire diameter: 6.0 mm Machine weight: 3500 kg Dimensions without electrical components (L x W x H): 3600 x 1500 x 2400 mm Item condition: very good Ljdpfjg T S Tdjx Aanoak Manufacturer's description, deviations possible. You are purchasing the machine as shown in the pictures. Complete factory closure, large selection of storage platforms, pallet racks, shelving units, and paternosters. High-quality industrial machines, lathes, grinders, and hand tools. You can find more punching and bending machines - new and used - in our shop! International shipping costs upon request!

Condition: ready for operation (used), Punching force: 40t, working range: 1500mm/900mm, max. sheet thickness: 4mm, dimensions X/Y/Z: approx. 3700mm/1700mm/1900mm, weight: approx. 2500kg. Including various stamps. Lasdpfxot Amdre Aanok

Condition: excellent (used), Year of construction: 2006, Bihler RM 40E stamping and bending machine Compact machine system for the production of stamped and bent parts from strip and wire. Quick tool clamping system for minimal setup times User-friendly P CNC 4E machine and process control Compatibility with RM 35, RM40, and RM4 tools Item condition: very good You are purchasing the machine as shown in the pictures. Ljdjg Ipliopfx Aaneak Type: RM 40E No. 27804 Year of manufacture: 2006 1x 184-01-0022.0 Basic machine RM 40 incl. central lubrication and pneumatic system incl. P-CNC 4E control according to installation plan 184-00-0078.3 incl. tool: 484 0025 2x 142-04-0347.0 Wide slides (items A9 and A16) 1x 142-55-0007.0 Angle lever unit with right lever (item A7) incl. light barrier for personnel protection You can find more items - new and used - in our shop! International shipping costs on request!

Year of construction: 1995, condition: ready for operation (used), A laser cutting and punching machine Trumpf with an unknown defect (linear amplifier in order) is available. Press force: 220kN, laser power: 1500W (1.5kW), max. punching diameter: 76mm, max. workpiece dimensions X/Y: 2585mm/1280mm, max. sheet thickness mild steel/stainless steel/aluminum: 8mm/6mm/4mm, max. workpiece weight: 200kg, part dispenser X/Y: 500mm/500mm, magazine positions: 18, machine dimensions X/Y/Z: approx. 8000mm/7500mm/2400mm, weight: approx. 16000kg. On-site inspection is possible. Lasdpfxewftdgs Aanok

Condition: ready for operation (used), A punch riveting tool Böllhoff is available. Documentation available. An on-site inspection is possible. Laedpfx Aasw E Iy Nonsk