Used Headstock for sale (325)

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, total height: 4,700 mm, ram adjustment: 100 mm, installation height: 550 mm, table height: 1,200 mm, total width: 1,700 mm, total length: 2,700 mm, table length: 2,100 mm, table width: 1,000 mm, pressing force: 200 t, control cabinet height: 2,245 mm, control cabinet width: 2,400 mm, input voltage: 400 V, distance between side stands: 520 mm, distance between stands: 2,100 mm, overall weight: 48,000 kg, year of last overhaul: 2025, input frequency: 50 Hz, ZEULENRODA Punching and Forming Machine - Cast Iron Version - HR 200-2000 NL The punching machine is sustainably manufactured as a new machine, using carefully inspected, reusable cast iron components (table, headstock, and side supports). Press ram newly manufactured in a vibration-damping cast iron design. Bwedpfozu Avbjx Aknsw Drive system with a compact drive unit and a 2-connecting rod power transmission. • Total pressing force 200 t • Stroke rate 30...120 min-¹ • Working capacity 29 kNm • Ram adjustment 100 ±0.01 mm • Ram stroke, adjustable 30 - 150 mm • Press force monitoring • Hydraulic overload protection • Main control panel + Two-hand control panel • Hardware and software interface for strip lubrication / roller feed / strip coiler • Control system SIEMENS S7-1500 • Remote maintenance

Condition: excellent (used), functionality: fully functional, machine/vehicle number: 70.0961.000.253, TECHNICAL DETAILS: Turning diameter: - Over bed: 800 mm Bjdpfx Akoup A Rzsnsww - Over carriage: 560 mm - Diamter of face plate: 750 mm Height of centers: - Over flat ways: 380 mm - Over Vee ways: 358 mm Gap, bed and gap piece: - Turning diameter in gap: 980 mm - Width of gap in front of face plate: 380 mm - Swing in gap: 1040 mm - Width of gap in front of face plate within swing diamter: 330 mm - Width of bed: 560 mm Headstock spindle: - Diameter of spindle bore: 90 mm - Spindle diamteres in front bearing: 145 mm - Taper in spindle: 6 Morse Spindle speeds: - Number: 18 - Spindle speed ranges: 7,1 - 355 RPM 9,0 - 450 RPM 11,2 - 560 RPM Power required: 7,5 - 14 kW Feeds: - Number: 32 - Sliding feeds per revolution: 32 longitudal feeds: 0,071 - 2,5 mm/rev. 32 cross feeds: 0,04 - 1,4 mm/rev. Extras: additional equipment, manuals for machine

Condition: used, Year of construction: 2007, functionality: fully functional, STAR MICRONICS ECAS-12 CNC SWISS-TYPE AUTOMATIC LATHE Manufacturer: Star Micronics Co., Ltd., Japan Model: ECAS-12 Type: 570 Year of manufacture: 2007 Serial/Lot number: 0398 (036) Machine type: CNC sliding-headstock / Swiss-type automatic lathe CNC control: Siemens 840Di Number of controlled axes: 10 Main and counter spindle: Yes C-axis on main and counter spindle: Yes TECHNICAL DATA Maximum machining diameter: 13 mm Maximum headstock stroke: 205 mm Maximum stationary drilling diameter: 10 mm Maximum driven-tool drilling diameter: 8 mm Maximum stationary tapping capacity: M8 × P1.25 Maximum driven-tool tapping capacity: M6 × P1.0 Maximum milling diameter: 10 mm Maximum die-cutting capacity: M8 × P1.25 Maximum slotting capacity: 1.5 × 4 mm MAIN SPINDLE Maximum spindle speed: 12,000 rpm Minimum C-axis indexing increment: 0.01° Main spindle motor output: Approximately 3.7 kW / 5 hp COUNTER SPINDLE Maximum clamping diameter: 13 mm Maximum counter-spindle speed: 12,000 rpm Minimum C-axis indexing increment: 0.01° Counter-spindle motor output: Approximately 3.7 kW / 5 hp Number of counter-spindle tool positions: 4 DRIVEN TOOLING Maximum driven-tool speed: 8,000 rpm Driven-tool motor output: Approximately 0.75 kW / 1 hp Powered cross-working and rear-working tool stations AXES AND FEED RATES Linear axes: X1, Y1, Z1, X2, Z2, X3, Y3 and Z3 Bwedpfozxhz Dox Aknow Rotary axes: C1 and C2 Maximum rapid traverse on linear axes: 18,000 mm/min Maximum rotary-axis feed: 194,400°/min Minimum programmable linear increment: 0.001 mm Minimum programmable C-axis increment: 0.001° ELECTRICAL DATA Operating voltage: AC 200 V Power supply: Three-phase Frequency: 50/60 Hz Connected load: 8.0 kVA DIMENSIONS AND WEIGHT Approximate machine dimensions: 2,590 × 1,140 × 1,830 mm Machine weight: 3,500 kg Dimensions exclude the bar feeder and peripheral equipment.

Condition: excellent (used), Year of construction: 1984, functionality: fully functional, Equipment: documentation/manual, Universal milling machine Deckel FP1 with 3-axis active digital readout TNC 113 Heidenhain and infinitely variable feed Super CONDITION Technical data: >> Year of construction 1984 Machine no. 2102-2601 >> Turn-tilt-swivel table >> Speed: 40 - 2000 rpm >> feed stepless in 3 axes >> Rapid traverse in 3 axes >> Drive power .:1,5 / 1,9 KW >> Spindle brake >> Travel X/Y/Z: 300/160/340 mm >> Vertical milling head can be moved 100 mm on headstock >> Vertical quill and horizontal quill - SK40 >> Tightening system S20x2 >> Weight approx. 800 kg Bwodpfx Asu Racreknew Accessories and equipment: Dpbyzb >> 3-axis digital display Heidenhain TNC113 >> Coolant device >> Operating instructions, spare parts plan To the machine : We are offering a Deckel FP1 universal milling machine built in 1984 in very good condition. The machine has very little crank play and all spindles can be moved easily. The milling machine runs very smoothly even at maximum speeds. On this newer FP1 model, the feed is infinitely variable in three axes, and the machine also has rapid traverse in these axes. A great advantage is the active 3-axis digital display. With this Heidenhain line control you can enter dimensions which the machine automatically approaches. The FP1 was in a training workshop where it was only used occasionally. An oil change was carried out. Mechanically and electrically tested. The Heidenhain digital display makes work easier and even more accurate. Take the opportunity to inspect and try out this machine under power on site.

Condition: used, Year of construction: 2011, STAR ECAS-20 — CNC SWISS-TYPE AUTOMATIC LATHE MACHINE IDENTIFICATION — VERIFIED FROM NAMEPLATE Manufacturer: Star Micronics Co., Ltd., Japan Model: ECAS-20 Type: 570 Manufacturing date: March 2011 Serial number: 0509 Lot number: 047 Supply voltage: AC 200 V, three-phase Frequency: 50/60 Hz Rated apparent power: 8.0 kVA Machine weight: 3,500 kg CE marking: Present MODEL SPECIFICATIONS — MANUFACTURER DATA Configuration: 10 axes; independent front/back machining; simultaneous two-tool turning Control system: Star Motion Control System Maximum machining diameter: 20 mm Headstock stroke: 205 mm MAIN AND SUB-SPINDLES Maximum speed: 10,000 rpm each Motor output each: 2.2 kW continuous / 3.7 kW for 30 minutes C-axis indexing: 0.01° each Sub-spindle chucking diameter: 20 mm Front-ejection length: 80 mm Bsdpfxez D Ezve Aknjww Workpiece projection: 30 mm TOOLING Turning positions: 4 front, 2 rear Tool shank: 12 mm; optional 16 mm Sleeve-holder positions: 4; optional 2 rear-end stationary tools Stationary drilling: Ø10 mm Tapping/die-cutting: M8 × 1.25 Optional driven positions: 3 front, 3 rear Driven-tool speed: 8,000 rpm Driven-tool motor: 0.75 kW Driven drilling: Ø8 mm Driven tapping: M6 × 1.0 Milling: Ø10 mm Slotting: 1.5 mm wide × 4 mm deep BACKWORKING Tool positions: 4 Drilling, stationary/driven: Ø10/Ø8 mm Tapping, stationary/driven: M8 × 1.25 / M6 × 1.0 CAPACITY AND DIMENSIONS Coolant tank: 120 litres Machine dimensions (W × D × H): 2,588 × 1,150 × 1,765 mm Overall installation dimensions with peripherals: Unconfirmed EQUIPMENT VISIBLE IN PHOTOGRAPHS Bar-feeding equipment with pendant control Fire-suppression cylinder and automatic CO₂ warning label CNC operator panel

Condition: excellent (used), functionality: fully functional, travel distance X-axis: 2,000 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 2,000 mm, table load: 6,000 kg, spindle diameter: 110 mm, spindle speed (min.): 5 rpm, spindle speed (max.): 1,120 rpm, total height: 4,300 mm, total length: 7,200 mm, total width: 4,600 mm, table length: 1,600 mm, table width: 1,400 mm, feed length W-axis: 800 mm, type of input current: AC, spindle stroke: 800 mm, overall weight: 26,000 kg, year of last overhaul: 2020, A Union Gera BFT 110/6 horizontal boring mill is for sale The machine was built around 1980 and was overhauled by us in 2009/2010 and has been in our care since then. The scope of the overhaul includes the following: - Electrical system almost completely renewed - New control cabinet incl. Siemens S7-200 PLC control system - New drive technology Siemens Simodrive 611, feed motors Siemens 1FK7 - Heidenhain TNC 124 line control + electronic handwheel - Heidenhain length measuring systems on X, Y and Z axes - Heidenhein angle measuring device in B-axis (rotary table) Bwedpfx Asu U Hvwoknsw - Spindle drive three-phase asynchronous with DC brake electronics - Renewal / overhaul of all hydraulic components - New KGT in X and Y axes - Overhaul of the drive systems of all feed axes - All axles were rescraped - Lubrication systems of axes and headstock overhauled - New bearings and overhaul of the gear components of the headstock For further technical details see photos or on request. Equipment of the machine: - Heidenhain TNC 124 line control + electronic handwheel - Facing slide (U-axis) - Electric tool clamp SK 50 The sale is due to capacity reasons. The machine is fully functional and immediately available. It achieves production accuracies according to the manufacturer's protocol. Technical documentation is available. The machine is fully functional and, by prior arrangement, can be inspected under power. The offer is subject to our terms and conditions of business and delivery. Subject to errors and prior sale. As a warranty is excluded for the purchase of used machines, we recommend that our our customers to inspect the machine before making a purchase. As is customary with used machines, payment is made by bank transfer before delivery of the goods. bank transfer. Dismantling, relocation, installation, commissioning and geometric adjustment at the new location, can be carried out by us on request. We will be happy to submit a separate offer for this. Delivery of the machine to other EU countries is also possible on request.

Condition: repair required (used), Year of construction: 2009, functionality: not functional, machine/vehicle number: B-8024, Technical characteristics: Bwedpsxxi Ewefx Aknjw # Machining Workspace: X 800 mm; Y 400 mm; Height from table surface to floor: 850 mm (max load 450 kg) # Number of T-slots: 3 / Distance between T-slots: 125 mm / Width of T-slots: 18 mm # Axis configuration: 3 LINEAR AXES (X, Y, Z) + 2 twin horizontal spindles + 4th axis # Rapid traverse rates: X, Y, Z – 30 m/min # Travel paths: Longitudinal (X-axis) 600 mm, Transverse (Y-axis) 400 mm, Vertical (Z-axis) 510 mm Headstock: # Spindle distance: 200 mm # Max. distance from spindle center to table: 650 mm # Spindle interface: ISO 7388 (with internal coolant), Tool holder size: 40 # Speed range (standard): 100 – 8000 rpm, Maximum torque at 330 rpm: 85 Nm, 7.5 kW Automatic tool changer: # Number of tools: 20, Selection system: sequential/random, Max. tool diameter (adjacent): 85 mm, Max. tool diameter (non-adjacent): 135 mm, Max. tool length: 250 mm, Max. tool weight: 6.5 kg, Tool change time: 3 seconds Electrical connection: # Voltage: 3x400V / 50Hz # Installed power: approx. 30 kVA Dimensions: # Required floor space: approx. L 2.1 x W 3.5 x H 3 m # Weight: approx. 4200 kg Equipment included: # CNC control – GE Fanuc Series 31i MODEL A # Chip conveyor # Lubrication system # Cooling system # Electrical cabinet # Spindle chiller: HARBOR Model: HBO-750PTSB2 # Documentation: Digital and hard copy available Machine condition: NOT OPERATIONAL # Y axis motor defective – requires replacement (not repairable) # 2 tool changer units defective – require replacement (not repairable) # Spindles defective – require replacement (not repairable) # Hydraulic unit defective – needs replacement or repair

Condition: repair required (used), Year of construction: 2010, functionality: not functional, machine/vehicle number: B-8029, Technical Characteristics: # Machining Workspace: X 800 mm; Y 400 mm; Table surface to floor height: 850 mm (maximum load 450 kg) # Number of T-slots: 3 / Distance between T-slots: 125 mm / T-slot width: 18 mm # Axis description: 3 linear axes (X, Y, Z) + 2 twin horizontal spindles + 4th axis # Rapid traverse rate: X, Y, Z – 30 m/min # Travel: Longitudinal (X-axis) 600 mm, Cross (Y-axis) 400 mm, Vertical (Z-axis) 510 mm Headstock Capabilities: # Spindle distance: 200 mm # Max. distance from spindle to table: 650 mm # Spindle nose: ISO7388 (with through-spindle coolant), Tool holder: Size 40 # Speed range (standard): 100–8000 rpm, Maximum torque / at 330 rpm: 85 Nm, 7.5 kW Automatic Tool Changer: # Number of tools: 20, Selection system: Sequential / random, # Max. diameter (adjacent tool): 85 mm, Max. diameter (non-adjacent tool): 135 mm, # Max. tool length: 250 mm, Max. tool weight: 6.5 kg, Tool change time: 6 s. # Tool change time: 3 s. Electrical connection: # Supply voltage: 3x400V/50Hz # Installed power: approx. 30 kVA Dimensions: # Required floor space: approx. L 2.1 x W 3.5 x H 3 m # Weight: approx. 4,200 kg Equipment includes: # CNC control: GE Fanuc Series 31i MODEL A # Chip extractor # Lubrication system # Cooling system Bsdpexxiy Isfx Aknsww # Electrical panel # Spindle cooling system: HARBOR Model: HBO-750PTSB2 # Documentation: Electronic and hard copy available Machine Condition: NOT WORKING # Tool changer: 1 unit broken – needs replacement (not repairable) # Spindles: broken – need replacement (not repairable) # Hydraulic unit: broken – needs replacement or repair

Condition: excellent (used), Year of construction: 2010, Cylindrical grinding machine Fab. Robbi Group Typ. Omicron 600 RT5 Year 2010 Technical data Make Robbi Group, IT Type OMICRON 600 RT5 Year of manufacture 2010 table Center width 600 mm Sanding length max. 600 mm Swivel range + 9° / - 5° Bsdpfx Akswhm Rfoneww Center height above table 160 mm Workpiece weight between centers 120 kg Workpiece weight for fly grinding 40 kg Tailstock Quill stroke 25 mm Quill diam. 43 mm Internal mounting cone CM 4 Workpiece headstock Rotation speed 0 - 600 Internal mounting cone CM 4 Spindle passage 26 mm Grinding wheel Diameter 450 mm Width min 20 / max 50 mm Bore 127 mm Equipment - Manual or automatic cycle - Automatic dressing compensation - Simplified presetting of grinding wheel and workpiece All information without guarantee. A demonstration under power is possible at any time in our exhibition hall.

Year of construction: 1980, condition: used, The Sledum RG-270 is a high-precision, industrial-grade crankshaft grinding machine developed for the precision grinding of crankshafts in internal combustion engines and the journal surfaces of similar rotating components. The machine is built on a massive cast-iron machine bed, offering high stability and vibration damping. The design enables uniform, high-precision machining of large crankshafts. Key Technical Features: Distance between centers: 2000 mm Maximum swing radius: 270–275 mm Machinable parts: crankshafts, shafts, eccentric rotating components Grinding spindle with high-rigidity bearings Fine-feed cross and longitudinal slide system Machine bed with precision guide rails Adjustable steady rest system for stable support of long workpieces High-power grinding motor for continuous industrial operation Bwedpfxjzbiblo Aknew Manually controlled feed and positioning system Stable, vibration-damped industrial machine frame Coolant system with preparation/conditioning unit Heavy-duty industrial construction, designed for long service life Accessories and Equipment: Complete headstock and tailstock (counter-spindle) system Grinding spindle unit with grinding wheel mount Adjustable steady rests for long shafts Workpiece clamping system Precision alignment and centering components Grinding wheel mounting flanges Workpiece rotation mechanism Manually controlled operator panel Complete slide system with fine feed Coolant connection points Machine body and industrial machine bed Adjustable workpiece support units

Condition: used, functionality: fully functional, turning diameter: 290 mm, center height: 145 mm, spindle bore: 35 mm, spindle speed (max.): 2,000 rpm, spindle speed (min.): 52 rpm, total height: 1,200 mm, total length: 1,500 mm, total width: 700 mm, 3 Phase 380V motor is running fine! Left & right running. Electronic engine brake. Geared headstock, gears running in oil. 9 Spindle speeds adjustable from 52 up to 2000 RPM. Metric lathe. Norton gearbox for easy thread cutting. Power feed in both side as cross ways direction. Original Harrison splash guard. D1-3 Camlock spindle nose. Multifix quick change toolpost with a total of 4 toolholders. MT3 Tailstock intake. Distance between centers: 800mm Center height: 145mm Spindle bore: 35mm Overall dimensions: 150x70x120cm Made in the UK. Contact us for shipping options! Bodswfiaqopfx Aknjww €3,900.00 Ex VAT

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, 5-axis Milling Machining Centre | Brand: MATEC | Type: 30 HV Year of manufacture: 06/2008 Range of components: Steel, cast and welded structures. The large X-axis and the head, which can be swivelled through 105° in either direction, are ideal for multi-sided machining of long profiles or shafts. The machine can be inspected under power by appointment. Condition: In working order / ready for use. Operating hours ((September 7, 2026): Control on: 76.085 h Machine on: 62.198 h Program run: 26.653 h TECHNICAL SPECIFICATIONS Travels: - X-axis: 3.000 mm - Y-axis: 800 mm - Z-axis: 1.100 mm - A-axis: +/- 105° - B-axis: 360° - 1-axis NC swivel head, swivels through +/- 105 degrees - Speed range: 20 - 9.000 rpm - Drive power of motor spindle increased: 30 kW * Torque max.: 190 Nm * Boring capacity in steel: ca. 60 mm * Milling capacity: approx. 500 cm3 * Thread cutting: M30 SPECIFICATIONS: - CNC control system: HEIDENHAIN iTNC 530 - NC rotary table, brand: KESSLER, embedded in the machine table, SKH-NC 6/800 * Horizontal faceplate,diameter: 800 mm * Direct measurement system for the NC rotary table * Part accuracy: : +/- 12" * Load capacity max.: 2,5 tons * Tangential torque with clamping: max. 6.500 Nm, incl. motor (AC) with integrated rotary measuring system, hydraulic clamping and incl. additional CNC axis - Clamping plate: Width / length: 835 / 3.500 mm Number of T-slots: 7 Slot width: 18-H8 - Amperemeter for the main spindle drive - Tool magazine: 48 positions - Additional tool magazine: 48 positions, including tool changer, specialised software and control panel for loading tools whilst the machine is running in automatic mode - Working area: * Rapid speed: 30 m/min * Feed rate: 30.000 mm/min - Spindle: * Cone/tool holder: SK40, DIN 69871 * Rotational speed: 9.000 / 30 kW - Internal coolant supply 40 bar (paper belt filter, tank capacity: 450 l) - High coolant pressure at the external nozzles High-pressure coolant pump, switchable via the M function in the parts programme to the external nozzles on the headstock, 20 bar. - Coolant supply flow monitor - Compressed air through the tool - Centralised oil lubrication - Oil mist extraction system - Direct measurement system: X, Y and Z axes - 3D measuring probe, brand: RENISHAW RMP 60, with radio signal transmission for control, including control software - Tool breakage detection - Tool length measurement - Fully enclosed work area with a roof; a completely enclosed work area. The loading doors are designed in such a way that loading by crane is possible at any time whilst they are open. - Safety fence fitted to the machine - Stronger linear guides for the Y-axis = 800 mm X = size 65, Y + Z = size 55 - Bellows with steel vanes - Rinsing gun - Electronic handwheel (portable), brand: HEIDENHAIN HR 410 - Chip conveyor - Workstation lighting (2-light) - Extraction system - Safety/machine guard glasses are being replaced - Compressed air refrigeration dryers - Documentation - CE marking Special features: - Zero-point clamping system - Swiveling head - The CNC rotary table, in combination with the swivel head, enables 5-sided or 3D machining of workpieces The sale does not include any clamping devices. Bodpfxjzyy Rms Aknoww Without guarantee of completeness and correctness of the technical information and the equipment. - Subject to prior sale -

Condition: used, Year of construction: 1968, Technical details: bore capacity in St 60 - full boring: 40 mm drill capacity in cast iron: 55 mm Bwjdsu Iwwzopfx Aknsw turning diameter over bed: Ø 22 - 2200 mm clamping diameter: ca.: Ø 100 innen / Ø 200 außen mm Total power requirement: 5,0 kW machine weight approx.: 1,2 t dimension machine xH: 1,70 x 0,80 x 1,40 m Relieving lathe This machine can also be used as a milling head (as a side support). Designation: horizontal unit drilling machine with EB 40 Design: drilling other technical features: Headstock: - Speed 22 - 2000 rpm - feed rate range 0,025 - 0,5 U/mm - three-jaw chuck Ø 190mm with bore Ø 54mm, equipped with internal jaws - headstock bore 45mm - drilling spindle taper MK 5 Operation via control panel on the side of the machine. By removing the lathe chuck, the spindle can be used as a drilling unit. max. slide adjustment 300 mm accessories: -div. outer jaws for lathe chuck i.D. *

Condition: good (used), rotational speed (max.): 2,050 rpm, rotational speed (min.): 45 rpm, type of input current: three-phase, table length: 600 mm, table width: 210 mm, Used conventional milling machine Make: Metba Model: MB-1 Features a 3-axis dimension display. Table: 600x210mm Travel: Bjdpfx Aoz Dtw Sjkneww - Longitudinal with motor / Manual table: 290mm / 300mm - Vertical manual with bellows / without bellows: 270mm / 320mm - Vertical motorized with bellows / without bellows: 260mm / 310mm - Cross travel of the headstock, manual: 180+120mm Automatic feeds: - Vertical and longitudinal: 15 to 500 mm/min. - Slow feed: 7 mm/min. - Rapid traverse: 1200 mm/min. Speeds: 12 (From 45 to 2,050 rpm) Motor power: 5Hp (Three-phase 380V) Headstock type: Swivel / Universal (accepts arbor or vertical headstock). Common uses: Machining of small/medium-sized parts, prototyping, and maintenance or restoration work. Includes: - Vise with swivel - Collet chuck with various sets of collets - Various milling tools (See photographs of the material on the floor)

Condition: excellent (used), functionality: fully functional, Equipment: documentation/manual, F736 Universal milling machine Deckel FP1 with 3-axis active digital readout TNC 111 Heidenhain Bodpfx Aju Nvwvsknjww 2008 Retrofit at FA Huttelmaier Very good CONDITION Technical data: >> Year of construction 1985 Machine no. 2102-2891 >> Rigid angle table >> Speed: 40 - 2000 rpm >> Infinitely variable feed in 3 axes >> Rapid traverse in 3 axes >> Drive power .:1,5 / 1,9 KW >> Spindle brake >> Travel X/Y/Z: 300/160/340 mm >> Vertical milling head can be moved 100 mm on headstock >> Vertical quill and horizontal quill - SK40 >> Tightening system S20x2 >> Weight approx. 800 kg Accessories and equipment: >> 3-axis digital readout Heidenhain TNC111 >> Coolant device >> Operating instructions, spare parts plan To the machine : Universal milling machine Deckel FP1 built in 1985 in very good condition. The FP1 was overhauled by Huttelmaier in 2008. The machine has very little crank play and all spindles can be moved easily. The milling machine runs very smoothly even at maximum speeds. On this newer FP1 model, the feed rate is infinitely variable in three axes, and the machine also has rapid traverse in these axes. A great advantage is the active 3-axis digital display. With this Heidenhain line control you can enter dimensions which the machine automatically approaches. The FP1 was in a training company where it was only used occasionally. An oil change was carried out. Mechanically and electrically tested. The Heidenhain digital display makes work easier and even more accurate. Take the opportunity to inspect and try out this little gem under power on site.

Condition: excellent (used), Year of construction: 1992, functionality: fully functional, Equipment: documentation/manual, F729 Universal milling machine Deckel FP1 with 3-axis active digital readout TNC 113 Heidenhain and stepless feed very good CONDITION Technical data: >> year of construction 1992 machine no. 2102-6289 >> Rigid angle table (newly planed) >> Speed: 40 - 2000 rpm >> Infinitely variable feed in 3 axes >> Rapid traverse in 3 axes >> Drive power: 1.5 / 1.9 KW >> Spindle brake >> Travel X/Y/Z: 300/160/340 mm >> Vertical milling head can be moved 100 mm on headstock >> Vertical quill and horizontal quill - SK40 >> Tightening system S20x2 >> Weight approx. 800 kg Accessories and equipment: >> 3-axis digital readout Heidenhain TNC113 Bmbwuweo9T3 >> Coolant device >> Operating instructions, spare parts plan To the machine : Bsdpou T D Nrofx Aknoww We offer a Deckel FP1 universal milling machine built in 1992 in very good condition. The machine has very little crank play and all spindles can be moved easily. The milling machine runs very smoothly even at maximum speeds. On this newer FP1 model, the feed is infinitely variable in three axes, and the machine also has rapid traverse in these axes. A great advantage is the active 3-axis digital display. With this Heidenhain line control you can enter dimensions which the machine automatically approaches. The FP1 was in a training company where it was only used occasionally. An oil change was carried out. Mechanically and electrically tested. The Heidenhain digital display makes work easier and even more accurate. Take the opportunity to inspect and try out this machine under power on site.

Condition: ready for operation (used), Year of construction: 1970, functionality: fully functional, machine/vehicle number: 50052, Year of manufacture: 1970 Serial number: 50 052 The machine was overhauled in 2007. GENERAL CHARACTERISTICS OF THE MACHINE The machine features a fixed gantry with a moving table. The gantry is equipped with a height-adjustable crossbeam, which can be fitted with one or two vertical spindles in the VF 120 version. The gantry can also be fitted with one or two side-mounted (horizontal) VF 160 headstocks. The clamping surface consists of two interconnected clamping tables, which can also be used individually when disconnected (only one table can be operated at a time). Clamping Table: Bwodpfx Aexxwy Aoknsw Dimensions of one table: 1,600 x 3,000 mm Total length of connected tables: 7,000 mm Clamping surface of connected tables: 6,500 mm Clamping T-slots (width x pitch x number): 28 mm x 160 mm x 9 pcs Table height from base: 900 mm Travel of one table: 3,000 mm (connected tables: 6,500 mm) Table feed rate: 20 – 2,000 mm/min Rapid traverse: 4,000 mm/min Gantry with height-adjustable crossbeam: Clearance between side columns: 2,020 mm Crossbeam height adjustment: 110 - 1,685 mm Crossbeam feed rate: 1,450 mm/min VF 160 Horizontal Headstock: Taper: ISO 60 Motor power: 30 kW Speed range: 15 – 710 rpm Feed rate: 10 – 2,000 mm/min Number of speeds: 16 VF 120 Vertical Headstock: Taper: ISO 50 Motor power: 18 kW Speed range: 28 – 910 rpm Number of speeds: 16 Overall machine dimensions (L x W x H): 14,780 mm x 5,650 mm x 4,800 mm

Condition: good (used), Year of construction: 2004, functionality: fully functional, IRLE IRD 1600 CNC End finishing machine Manufacturer: IRLE, Type: IRD 1600 CNC Year of manufacture: 2004, Control: Max. workpiece diameter: 1,625 mm Min. workpiece pipe diameter: 406 mm Max. workpiece pipe length: 13,200 mm Min. workpiece pipe length: 6,000 mm Min. pipe wall thickness: 12 mm Max. pipe wall thickness in copying mode: approx. 40 mm Max. pipe wall thickness in CNC mode: 70 mm Max. pipe weight: 250 kN Height between the hall floor and the pipe inlet: 800 mm Overall machine length: approx. 24,000 mm Overall machine width: approx. 4,100 mm Overall height from floor to top of clamping fixture: 5,000 mm Machine weight: approx. 700 kN 01 - Intermediate carriage with travel drive Carriage length: approx. 3,950 mm Bodjzqun Ujpfx Aknjww Carriage width: approx. 1,800 mm Carriage height incl. undercarriage: approx. 600 mm Travel speed on the base rails: 500 - 5,000 mm/min 01 - Intermediate carriage with travel drive Carriage length: approx. 3,950 mm Carriage width: approx. 1,800 mm Carriage height incl. undercarriage: approx. 600 mm Travel speed on the base rails: 500 - 5,000 mm/min 02 - Headstock Rotational speed range of the faceplate: 7 - 27 - 105 min" Motor speeds: 300 - 1,150 - 4,500 min" Motor power: 100 kW Motor power in S1 operation: 14.3 - 129 - 105 kW Max. torque of the faceplate in S1 operation: 33,000 Nm Rated speed: 27 min" Diameter of the main spindle in the front bearing: 300 mm 03 - Faceplate, X-axis Faceplate diameter: approx. 1,950 mm Travel distance of the NC tool holder: approx. 650 mm Feed rate of the adjustable tool holder: 0.5 - 1,500 mm/min (infinitely adjustable) Max. achievable feed force: 25 kN 04 - Feed drive; Z-axis Feed travel of the headstock on the machine bed: 800 mm, infinitely variable Three-phase controlled servomotor: 0.5 - 200 mm/min Rapid traverse speed: 1,500 mm/min Feed force: 30 kN Torque of the feed motor Mt = 27 Nm 05 - Pipe clamping mandrels Clamping range: 406 - 1,625 mm Pipe weight per mandrel: 150 kN Adjustable clamping force: 10 - 200 kN Max. adjustment speed of the centrally adjustable clamping crossbars: 600 mm/min

Condition: good (used), Year of manufacture: 1963 Machine number: 47 Type / Model: DLZ 355x1600 Control: conventional Center distance: 1,600 mm Bore: 35 mm Center height: 180 mm Swinging diameter over bed: 355 mm Swinging diameter over carriage: 180 mm Swinging diameter in the headstock: 700 mm Spindle speed range: 18 to 2,500 rpm Feed rate, longitudinal: 0.011 to 1.000 mm/rev Connection: 5.8 kW Accessories/Equipment: 3-jaw chuck 200 mm; 4-position tool holder, guide rest Condition: good, ready for use Weight: 2.2 t Bwedpfjznbt Sjx Aknsw Footprint: 2,700 x 450 mm Dimensions: 3,000 x 1,100 x 1,300 mm

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,300 mm, travel distance Z-axis: 1,000 mm, spindle speed (min.): 36 rpm, table width: 800 mm, table length: 3,000 mm, rotational speed (max.): 4,000 rpm, Equipment: documentation/manual, SHW UFZ 4 Rigid upright Travels - X-axis (bed): 3,000 mm - Y-axis (vertical): 1,300 mm - Z-axis (headstock): 1,000 mm Control system - CNC control: Heidenhain iTNC 530 Table assembly - Clamping surface 3,000 x 800 mm - Traverse path X = 3,000 mm Universal milling head in orthogonal design - Swivel range of milling head holder: 360 x 1 degree - Swivel range of milling head: 180 x 1 degree - Tool holder: SK 50 DIN 69871 - Speed range: 36 - 4,000 1/min RETROFIT in 2008 - Year of construction 1992 Chip conveyor - Feed length: 3,000 mm Automatic tool changer - Magazine for 45 tools About us: MBM Maschinenservice & Gebrauchtmaschinen GmbH is an independent specialist for SHW machine tools. Our main focus is in the field of tool milling machines. Our services include spare parts deliveries, on-site customer service, machine overhauls and control system modernizations. Services: - Used machines - Spare parts - Customer service - Machine service - Machine overhauls - Control modernization _____ used machine - used milling machine - used milling machine - used milling machine - used milling machine - used milling machine - used milling machine - used milling machine - used milling machine - used milling machine - used milling machine - used milling machine - used milling machine - used milling machine - used cnc milling machine - used milling machine - used metal milling machine - used metal milling machine - used cnc milling machine - used metal milling machine - used milling machine metal milling machine used - used cnc milling machine - cnc milling machines - cnc milling machines - milling machine - large part machining - large part machining - large part machining - cnc large part machining - milling - shw - UFZ4S - UFZ 4 S - Rigid Stacker - Bed Milling Machine - SHW Uniforce - Heidenhain iTNC 530- Heidenhain - MBM Milling Machine - MBM Machine - Column Milling Machine Bwedpjt Epnxofx Aknjw

Condition: used, Year of construction: 2013, Brand : GEMINIS Model : GT5 G2 1200x1000 Manufacture year : 2013 Bjdpfx Aozn Axieknsww Cnc : SIEMENS 840D-SL Center height: 615 mm Swing over cross slide: 850 mm Swing over bed : 1200 mm Main spindle bore diameter: 104 mm Main spindle nose: DIN 55026-11 mm Spindle diameter on front bearing:150 mm Turning Speeds : 0-1400 rpm Spindle Ranges: 4 Headstock power: (S1/S6-60%) 30/37kw – (37/46kw Optional) Headstock torque: (S1/S6-60%) 4000/4850 Nm (4800/5950Nm) Guide width: 655 mm Height up to the plane guide: 800 mm

Condition: ready for operation (used), Year of construction: 2014, operating hours: 2,041 h, spindle speed (max.): 2,800 rpm, controller manufacturer: SIEMENS, controller model: SIEMENS 828D, number of axes: 2, This Romi C 510 was manufactured in 2014. It has a hollow spindle with a Ø 65 mm spindle passage, a wedge bar manual chuck Ø 260 mm, and hardened guide surfaces. The tool holder is a Multifix steel holder head B K22. The machine operates at a standard spindle speed range of 56–2800 rpm and has automatic lubrication and cycle functions for efficient operation. If you are looking for a high-quality lathe, consider the Romi C 510 that we have for sale. Contact us for more information. Additional equipment • Console: Automatic cycle in the longitudinal direction with activation of console recess. Machine Benefits Technical Machine Benefits Bwsdpfox D I Iusx Aknew • Automatic features: tool clamping, hardening of guide surfaces, switching of milling spindle speed, frame cycles, and lubrication of guide surfaces. • Special versions: fully equipped, manual speed control, reduced speed range, manual tightening, numeric indicator for foreign production, and climate-controlled version without a control system. • Guide surfaces: hardened and plated counter surfaces. • Climbing milling: automatic device included. • Automatic tool clamping Extra Information Special Machine Versions: Raised milling headstock, automatic frame cycles, and compliance with foreign standards by agreement.Maschinenbeschreibung:CNC-Horizontal-Drehmaschine - ROMI C 510 V5.0 – SIEMENSStandardausführung:. Siemens-Steuerung 828D sl, mit 10,4” LCD-Farbmonitor. ASA A2-6" Spindelkopf, Drehmoment: max. 303 Nm bzw. ASA A2-8", max. Drehmoment 408Nm, mit 520mm Schwingdurchmesserüber Bett, 450 mm Schwingdurchmesser über Schlittenführung und 255mm Schwingdurchmesser über Planschlitten. Reitstock mit manueller Positionierung des Grundkörpers, mit manueller Betätigung der Pinole (stehende Zentrierspitze) MK-4. Eilgang längs/quer mit 10.000mm/min. Herausziehbarer Spänewanne. Elektroanlage lieferbar für folgende Spannungen/Frequenzen: 400VCA / 50-60Hz. Abgedichtete Arbeitsraumleuchte. ROMI RMMP manuelles Maschinenpaket, bestehend aus CNC gesteuertem Hauptschlitten mit zwei  elektronischen Handrädern für X- und Z-Achse, Joystick-Schaltern und der  bedienerfreundlichen Siemens Software "Manual Machine Plus". Adapterplatte Multifix K22 Type B mit Multifix Stahlhalterkopf B K22. Schleppeinrichtung für Reitstock. Automatische Schmierung mit Inline-Filter und Füllstandsensor. Kühlsystem, komplett mit Kühlmittelbehälter und Kühlmittelpumpe (10l/min,@7bar, 1,5kw/ 2cv). Kühlwasser Spritzpistole mit zusätzlicher Pumpe. Elektrischer Schaltschrank mit Kühlung über Zentrifugalgebläse und Überdruck. Spritzschutz, komplett, Schutztüre mit Sicherheitsfenster und Verriegelung durch elektrische Sicherheitsschalter. Schrauben und Muttern für Nivellierung. Schraubwerkzeugsatz für den Betrieb der Anlage. Vollständige Dokumentation für das ROMI-Produkt auf CD. Standardlackierung: Epoxidlack strukturiert Munsell-Blau 10B-3/4 und Epoxidlack strukturiert grau RAL 7035.

Condition: ready for operation (used), Year of construction: 2019, operating hours: 20,672 h, spindle motor power: 7,500 W, spindle speed (max.): 8,000 rpm, overall weight: 4,200 kg, total width: 1,550 mm, total height: 2,160 mm, bar diameter (max.): 26 mm, product length (max.): 2,350 mm, number of axes: 8, This 8-axis Maier ML26 C5Y were manufactured in 2019. It features a spindle capacity of 26 mm and a rapid carriage speed of 32 m/min. The machine includes a robust coolant capacity of 260 l and is equipped with a bar feeder and extensive tooling package. Three machines available! If you are looking to get high-quality turning capabilities, consider the Maier ML26 C5Y swiss type turning machine we have for sale. Contact us for further details. Bwedpsz R A Uuefx Aknew - Carriage / Rapid Speed: 32 m/min - Main Spindle Capacity: 26 mm - Main Spindle Indexing: Mechanical indexing 5° - Main Spindle Headstock Stroke: 320 mm (Options: 220 mm, 450 mm) - Main Spindle Power Rating (100% / 60%): 5.5 kW / 7.5 kW - Main Spindle Collet: 161E - Counter Spindle Capacity: 26 mm - Counter Spindle Indexing: Mechanical indexing 5° - Counter Spindle Max. Travel (Z2): 220 mm (340 mm option) - Counter Spindle Speed: 0 - 8000 rpm - Counter Spindle Power Rating (100% / 60%): 5.5 kW / 7.5 kW - Counter Spindle Collet: 161E - Guide Bush Model: 451.001 - Coolant Capacity: 260 l / 1.5 bar - Cross Machining Lathe Tool Holders: 5 pcs. (12x12) - Driven Tools: 4 pcs. - Back Machining Tools: 4 pcs. Ø34mm (driven) - Back Machining Y2 (Option): 4 pcs. Ø34mm (fixed), 4 pcs. Ø34mm (driven) - Front Machining Tools: 5 pcs. (fixed) - Power On Time: 31,849 h 23 min - Cutting Time: 13519 h - Part Total Count: 1,052,178 pcs - Accessories: Bar feeder / loading magazine (FMB), oil mist extractor (LTA), 2 x live tools, extensive tooling package included - Total Power: 17.3 kW - Voltage: 400 / 230 / 24 V Technical Specification Counter Spindle Yes

Condition: repair required (used), Year of construction: 2008, functionality: not functional, machine/vehicle number: B-7969, Technical characteristics: # Machining Workspace: X 800 mm; Y 400 mm; Height from table surface to floor: 850 mm (max load 450 kg) # Number of T-slots: 3 / Distance between T-slots: 125 mm / T-slot width: 18 mm # Axis description: 3 LINEAR AXES (X, Y, Z) / 4th Axis # Rapid traverse: X, Y, Z - 30 m/min # Travels: Longitudinal (X-axis) 600 mm, Cross (Y-axis) 400 mm, Vertical (Z-axis) 510 mm Headstock capabilities: # Max. distance from spindle to table: 650 mm # Spindle nose: ISO7388 (with internal coolant supply), Tool holder size: 40 # Spindle speed range (standard): 100–14,000 rpm, Max. torque / at 330 rpm: 63.7/89.4 Nm Automatic tool changer: # Number of tools: 20, Selection system: sequential/random, Max. diameter (adjacent tool): 85 mm, Max. diameter (non-adjacent tool): 135 mm, Max. tool length: 300 mm, Max. tool weight: 6.5 kg # Tool change time: 3 s Electrical connection: # Voltage: 3x400V/50Hz # Installed power: approx. 30 kVA Dimensions: # Floor space required: approx. L 2.1 x W 3.5 x H 3 m # Weight: approx. 4,200 kg Equipment includes: # CNC control: GE Fanuc Series 31i MODEL A Bwjdpfx Akjxxvtuonsw # Chip conveyor # Lubrication system # Electrical cooling cabinet # Spindle cooling system # Documentation: Electronic available / printed manual not available Machine status: NOT WORKING # 4th axis broken – repairable – dismantled from machine # Tool changer broken – repairable – dismantled from machine # Hydraulic pump broken – requires complete replacement

Condition: used, Year of construction: 2010, bar material dia. 20 mm spindle passage 24 mm turning length 350 mm turning speeds 10.000 U/min Control CNC Siemens 840Di/Yaskawa Bwedpezrh Ecjfx Aknew c-axis 0,01° ° gripping station 20 mm speeds 10.000 U/min c-axis 0,01° ° rapid traverse 20 m/min turret (x-stations) 3 x 8 + (3x Y-Achse) total power requirement 5,5 kW weight of the machine ca. 4.850 t dimensions of the machine ca. 3,2 x 1,75 x 1,9 +FMB m CNC sliding headstock automatic lathe Star ECAS 20T (12 axes) with 2 spindles, 3 turrets and barloader FMB.