Used Heating Furnace for sale (16,554)

Condition: used, functionality: limited functionality, tank capacity: 2,500 l, total length: 2,170 mm, total width: 750 mm, total height: 1,860 mm, overall weight: 100 kg, Equipment: mobile diesel tank, This is a used and dismantled 2500-liter heating oil tank with approximately 100 liters of residual heating oil sludge. Pickup only – delivery not possible. Kdjdpfx Aasxfv Hhsbou

Year of construction: 2020, condition: like new (used), functionality: fully functional, Fully automatic sintering continuous furnace system Manufacturer: Sarnes Kdsdpfxexfcdye Aabeu Model: 600-G/CQI-9 Year of manufacture: 2020 (commissioned 2021) Programmable, with online diagnostic system. Fuel: natural gas Hydrogen + nitrogen (N2+H2) operation integrated The system has seen very little use and is in excellent condition. Offer / Quotation Date: 18.1.19 620 mm belt width, gas heated, N2/H2 operation, LED dewaxing zone, rapid cooling section (Pos 2), flameless discharge and ceramic muffle, Heating: low NOx RS Rekudrall burners, SiSiC burner tubes, installed heating capacity 320 kW in 8 zones, dual thermocouples, 100 mm usable height. LED 3 dewaxing zones ("low energy dewaxing" – utilization of chemically bound energy of the waxes and improved burnout conditions especially for heavy PM parts (>0.9 kg)). Dimensions: - Infeed table 2 m (target-actual belt speed compensation) - LED3 dewaxing zone: 1.5 m - Sintering zone length 7.5 m - Rapid cooling length 1 m - Convective cooling zone length 2 x 4 m - Flameless discharge with air shower 2 m - Outfeed table 2.7 m - Total system length 23.7 m - Width 2.3 m Connection ratings: Heating: installed power 320 kW Natural gas: 25 m³/h (80 mbar) N2: 45-65 m³/h (max. 80 mbar) H2: 0.5 - 15 m³/h (80 mbar) Cooling water: 3-5 m³/h (non-pressurized; temp.

Condition: new, Year of construction: 2023, functionality: fully functional, Kaisai KHA-16RY1/KMK-160RY3 heat pump, brand new in packaging, 4 units available, price per unit. Kdedpfoxauffsx Aabeu

Year of construction: 2015, condition: excellent (used), functionality: fully functional, Chamber furnace, very good condition. 12 months warranty. With pull-out base, fully refurbished. The furnace is not suitable for hot removal, but stress-relief annealing is possible! Tmax 1320°C Capacity: 330 liters Internal dimensions (W x D x H): 590 x 720 x 800 mm External dimensions (W x D x H): 930 x 1310 x 1840 mm Controller: TC 707 (99 programs with 48 segments each) SIC plates on bogie hearth (new) 5-sided heating (new) Manual intake and exhaust damper (new) Load weight: 40 kg per 100 liters (total 132 kg with all plates etc.) Power: 22 kW 3/N/PE 400V AC CEE 32 A connection Documentation, CE declaration Refurbished / New Parts: Contactors, complete heating system, bogie hearth lined with lightweight refractory bricks, bogie hearth SiC plates, seals, manual intake and exhaust damper. Kdjdpfsu Tqzzjx Aabju Inspection at our facility by appointment. Call us! Furnace, furnaces, industrial furnace, chamber furnace, kiln, drying oven, tempering oven, laboratory furnace, ceramic kiln, hardening furnace.

Condition: used, This listing is for the Cole Palmer Techne Blockice Cooling Heating Block Kedpfxoxhfyps Aabedu The unit is in full working condition and is ready for immediate use The Cole Palmer Techne BLoCKICE (also referred to as CB-200, FBLOCKICE) is a benchtop Peltier-cooled/heated block designed for precise incubation of sample tubes between 0 °C and 40 °C, ideal for maintaining biological samples within the 4–37 °C range Precise temperature control: Utilizes Isotemp™ technology to ensure uniform temperature across both aluminum blocks, with stability to ±0.2 °C Versatile block inserts: Holds two standard interchangeable aluminum insert blocks from the Dri‑Block® range; can use one double-width insert for higher tube volumes Timer & alert system: Integrated count-up/count-down timer programmable up to 9 days. Timer begins only once the set temperature is achieved, with an audible buzzer at completion User-friendly interface: Features a five-digit LED display in °C or °F, plus a dark lid to protect light-sensitive reagents and help maintain temperature Dimensions & build: Compact footprint (~190 mm × 240 mm × 225 mm), weighing ~3 kg, operating on 100–230 V AC, 50/60 Hz Performance notes: Achieves 4 °C within ~30 minutes at 20 °C ambient; reaching extremes like 0 °C or 40 °C may take hours, although pre-cooling inserts can accelerate that

Condition: reconditioned (used), functionality: fully functional, operating pressure: 180 bar, high-pressure hose length: 10,000 mm, empty load weight: 130 kg, input voltage: 400 V, warranty duration: 6 months, temperature: 80 °C, KARCHER HDS 850-4M HOT WATER WASHER NEW HEATING COIL The device features new accessories, including a German R+M gun, stainless steel lance, steel braided hose, and a 25° power nozzle. A durable brass head with new ceramic pistons and seals guarantees long and trouble-free operation. A highly efficient three-phase motor ensures stable operation even during prolonged use. With operating parameters of 180 bar and 900 l/h, the machine can be effectively used for heavy-duty work in construction, logistics, and agriculture. Each device we offer has individually taken photos; you are buying exactly what you see. TECHNICAL DATA: Power supply voltage [V]: 400 ~3 phase Discharge capacity [l/h]: 900 Operating pressure [bar]: 180 Max. heating temperature [°C]: 80 Connection power [kW]: 6.5 Detergent tank [l]: 20 Hose length [m]: 10 Weight [kg]: 130 EQUIPMENT: NEW HEATING COIL NEW durable pressure gun from the German brand R+M Ksdsxa Emmepfx Aabodu NEW stainless steel pressure lance NEW reinforced 10m steel braided pressure hose NEW 25° power nozzle WATER FILTER AND GEKA CLAW COUPLINGS - FREE KEY FEATURES: Open oil system - no operating time limits Built-in chemical tank allows for dosing of cleaning fluid directly through the machine Very clear and intuitive control panel Simple design and easy access to individual components under the housing make the machine user-friendly and easy to use servicing The RM110 water softener tank prevents corrosion and scale buildup inside the heating coil and other pipes.

Year of construction: 1996, condition: good (used), Useful dimensions: 700 x 650 x 1,100 mm Batch weight: 800 kg Temperature: max. 1,000 °C Heating: Natural gas heated Kedpfx Aasw R Szgsbsdu Quench: Oil/Air Equipment: Control Siemens Simatic

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, machine/vehicle number: CU 600.6, The expansion vessel is in very good condition. Sale only due to the refurbishment of our heating system! Kjdswv T Nwspfx Aabjdu

Condition: good (used), Year of construction: 2005, Offer 25190 Technical Data approx.: - max. temperature 400°C - temperature control 0 - 250°C - time automatic 0 - 60 min. - working space under the yoke 320 - 200 mm - max. ball bearing weight 250 kg - drive 400 V / 12 kVA - space requirement approx. W 850 x D 600 x H 1150 mm Kodpfewp Exdex Aabedu - weight approx. 150 kg - yokes 40 + 50 + 80 mm - mobile base

Year of construction: 2017, condition: excellent (used), functionality: fully functional, Chamber furnace with exhaust hood, very good condition. 12 months warranty - Max temperature: 1300 °C - Internal dimensions (W x D x H): 400 x 400 x 400 mm - Capacity: 60 liters - Separate main switch - 5-sided heating - Air supply and exhaust with dampers, electrically operated via Belimo actuators - Supply air fan controlled by frequency converter via controller - Stainless steel exhaust hood Kodpfx Aastbq Eqebodu - Bentrup 507 control system, thyristor control - Controller language: German only, cannot be switched to other languages - Additional drag element type S for external recording - Documentation included - Net weight: 250 kg - Power consumption: 18 kW - Current draw: 26 Amps - Connection voltage: 3/N/PE 400VAC - Connection type: prepared for fixed installation, 32 A plug Furnace has been overhauled, all switching electrical components are new. Supplied with warranty. We have several units of this furnace type in stock. Viewing by appointment. Furnace, furnaces, annealing furnace, industrial furnace, chamber furnace, kiln, enamelling furnace, tempering furnace, laboratory furnace, hardening furnace.

Condition: used, This listing is for the Grant T100 12L Heating Circulating Bath The unit is in full working condition and is ready for immediate use Grant T100 12L Heating Circulating Bath – Stainless Steel Tank The Grant T100 12L Heating Circulating Bath is a robust, precise temperature control system combining the T100 Optima circulator with a 12-litre stainless steel tank. Ideal for laboratories requiring high stability and reliability for routine heating applications, it’s designed for use across many scientific disciplines. Key Features Temperature Range: +5 °C to 99 °C (cooling via immersion coil available) Capacities: 12 L Stainless Steel Tank: Durable, easy to clean, resistant to corrosion Kdjdpfxoxhfyis Aabou Temperature Stability: ±0.05 °C Temperature Uniformity: ±0.1 °C Heating Power: ~1.3 kW Controller: Grant T100 Optima circulator

Condition: good (used), Year of construction: 1996, total length: 7,150 mm, total width: 2,550 mm, total height: 2,670 mm, CPV, 20FT swap body tank container, 30,890L / 1 compartment, bottom discharge, UN PORTABLE, T7, steam heating, valid 5-year/CSC inspection until 02/2026 Kodpfx Aoxfrqvsabodu = Further information = General information Year of manufacture: Sept. 1996 Model year: 1996 Suitable material: Chemicals Weights Tare weight: 4,100 kg Payload: 29,900 kg GVW: 34,000 kg Functional Load compartment capacity: 26,000 l Body brand: HOLVRIEKA 26,000L TC, 1 comp., L4BN, IMO-1, T11 Number of compartments: 1 Condition Technical condition: good Visual condition: good

Year of construction: 1994, condition: good (used), The system consists of: Kodpfow R Sy Nox Aabjdu - 2 pieces of hardening ovens (1 x 10 Cg = 1,000 ° C; 1 x 11Cg = 1,100 ° C) - 1 piece tempering furnace (6 Cg = 650°C) - 1 piece of salt bath - 1 piece of oil bath - 2 washing machines (one per bathroom) - 1 piece charging machine - 2 parking spaces - Fumigation boards per system - Processing plant for salt - 9 preparation spaces - Base grid with cargo carrier - Capacity pto batch 165 kg - Usable dimensions = 400 x 400 x 600 (l x w x h) - Control Siemens S7

Year of construction: 1984, condition: used, max. temperature 1.050 Grad Kdedpfx Aei Db Dbjabju size of opening 380 x 230 mm depth of chamber 680 mm volume 60 L voltage 380 V total power requirement 19,0 kW weight of the machine ca. 540 kg dimensions of the machine ca. 1,15 x 1,35 x 1,65 m - Serial-No.: 13817

Year of construction: 1988, condition: as good as new (ex-display), machine/vehicle number: 1116/87, MANUFACTURER: ELTERMA/IPSEN MODEL: VDFC-413 DESCRIPTION: Vacuum tempering furnace YEAR OF PRODUCTION: 1988 Kdsdpfxom E Tvhe Aabeu STATUS: New unused, need revamping of the obsolete parts ( Cabinets ) Max Load Dimensions: 610x900x500mm Max Load Weight: 500 kg Working temperature: 150-750⁰C Approximate warm-up time of the vacuum chamber at 550 ° C for 30 minutes

Condition: as good as new (ex-display), Year of construction: 2025, Exhibition machine (new), available immediately - Internal dimensions (WxDxH): 1250 x 4000 x 1450 mm - External dimensions (WxDxH): 1900 x 4900 x 2500 mm - Power consumption: 240 kW - Current consumption: 350 Amps - Maximum temperature Tmax: 1300°C Ksdpfx Aaep H Tb Tobedu - Furnace weight approx.: 6000 kg - Control system: JUMO IMAGO 500 with software packages (OPCA & PCC) - Screen recorder: JUMO Logoscreen 601 - Includes cable entry and 6 additional sockets for logging customer type K thermocouples - Multi-zone design (3 zones) - Control cabinet with solid-state relays - Climate control for switching cabinet - Automatic supply and exhaust air dampers - Exhaust air dampers controlled automatically: - Minor cooling (2 dampers open) - Major cooling (all 6 dampers open) - Regulated cooling system (includes frequency inverter, controlled via temperature control system) with supply air fan - Electrically driven bogie hearth on rails - Max. loading capacity 3.5 t; reinforcement available on request! Metal loading platform for bogie hearth available on request! - Swing door - Documentation, CE declaration Reinforcement of the bogie hearth available on request! See image 4 (conversion example)! We are happy to offer on-site installation, commissioning, and staff training. Please contact us! Keywords: bogie hearth furnace, furnace, annealing furnace, kiln, hardening furnace, heat treatment furnace, oven, tempering furnace, curing oven, drying oven, industrial furnace

Condition: like new (used), Year of construction: 2018, functionality: fully functional, Preheating boiler (oil) Aura AKL 2504 G ▪ Power: max. 2500 kW ▪ Flow rate: max. 99 m3/h ▪ Pressure: max. 10 PS ▪ Temperature: -10 / 315 °C ▪ Volume: 1873 L Burner Weishaupt WM-G30/1-A ▪ Power: max. 3500 kW ▪ Gas type: Natural ▪ Pressure: max. 1 bar Kjdoxfa Tlspfx Aabodu

Condition: good (used), Year of construction: 1998, total length: 7,150 mm, total width: 2,550 mm, total height: 2,670 mm, CPV, 20FT swap body tank container, 31,360L / 1 compartment, bottom discharge, UN PORTABLE, T11, steam heating, valid 5Y/CSC inspection until 02/2026 = More information = General information Year of manufacture: July 1998 Model year: 1998 Permissible material: Chemicals Weights Tare weight: 4,100 kg Payload: 29,900 kg Gross weight: 34,000 kg Functional Cargo space capacity: 26,000 l Superstructure brand: HOLVRIEKA 26,000L TC, 1 comp., L4BN, IMO-1, T11 Kdodpfxoxfrp So Aabju Number of compartments: 1 Condition Technical condition: very good Visual condition: good

Year of construction: 2002, condition: good (used), Consisting of: - 2 pieces hardening furnaces 10 Cg gross weight 400 kg - 1 piece of nitriding oven 8 Cg gross weight 400 kg - 1 piece spray washing machine - 2 pieces tempering furnaces - 1 piece of oil quench bath 5000 liters Kedpfew R Sy Ajx Aabodu - 1 piece manipulator All technical data for the individual systems can be found in the attached pictures.

Year of construction: 2007, condition: repair required (used), functionality: not functional, Belt width: 650 mm, usable height: 220 mm, heated length: 3250 mm. The furnace has 3 heating zones and a heating capacity of 125 kW. The furnace has been stored in a hall for several years, and many components need to be sandblasted and repainted. In addition, the interior of the furnace needs to be relined, and some parts need to be newly manufactured. The furnace can also be completely overhauled by us to meet current technical standards. Kdsdpoxdantsfx Aabsu

Condition: good (used), Year of construction: 2001, functionality: fully functional, type of input current: three-phase, Glass tempering furnace TAMGLASS, HTF-2136-ABT-10-R 3,8 – 19 mm, 2100 x 3600 mm, Right-Left Year: 2001. Without convection Kdsdjvkhl Djpfx Aabou Noise reduction cabin included 400 V, 50 Hz, total power: 800 kW (heating 470 kW, motors 330 kW) In good technical condition. Inspection is possible by appointment.

Condition: good (used), Year of construction: 1997, total length: 7,150 mm, total width: 2,550 mm, total height: 2,670 mm, CPV, 20FT swapbody tank container, 31,030L/ 1 comp. Kdjdout R Eujpfx Aabsu bottom discharge UN PORTABLE, T11 steam heating valid 5Y/CSC insp. until 03/2025 = More information = General information Year of construction: Oct. 1997 Model year: 1997 Usable material: Chemicals Weights Empty weight: 4,100 kg Payload: 29,900 kg GVW: 34,000 kg Functional Content of cargo space: 26,000 l Brand of bodywork: HOLVRIEKA 26,000L TC, 1 comp., L4BN, IMO-1,T11 Number of compartments: 1 Condition Technical condition: very good Visual condition: good

Condition: good (used), Year of construction: 2014, Overall dimensions: 12.4 x 18.8 m incl. safety fencing Number of baskets per oven: 2x 1,170 x 1,150 x 2,000 mm Reference load weight (net/gross): 1,285 / 2,185 kg Max. load weight (net/gross): 2,000 / 2,700 kg Load: 2,050 x 1,150 x 2,800 mm, external dimensions: 2,950 x 6,400 x 7,800 mm Max. temperature: 600 °C Operating temperature: 510 °C Total heating capacity: 2 x 81 kW = 162 kW electric Quenching water bath: Type = QT-24.16.57/71E Kdjdpfjw R Sypex Aabju Temperature bath max.: 70°C, chamfering volume = 20 m^3 2 ageing furnaces: Type = ADBF-24.16.30/250E External dimensions: 2,800 x 4,850 x 4,000 mm Oven temperature max.: 250°C Operating temperature: 180 °C Total output: 2x 40.5 kW = 81 kW Electrical storage/retrieval section, Gea cooling coil, protective housing, safety equipment, system control 1,056 annealing baskets with stanchion pallets System already dismantled, packed and stored

Year of construction: 1997, condition: good (used), Consisting of: - 2 pieces hardening furnaces 10 Cg gross weight 400 kg - 1 piece of nitriding oven 8 Cg gross weight 400 kg - 1 piece spray washing machine - 2 pieces tempering furnaces - 1 piece of oil quench bath 5000 liters Kjdpfx Aew R Sx Soabodu - 1 piece manipulator All technical data for the individual systems can be found in the attached pictures.

Year of construction: 1973, condition: good (used), rust size: 700 x 650 x 1.100 mm Kdodpfjw R Srrox Aabsu batch weight: 1.000 kg Temperature: Max. 750 °C connected load: 78 kW Equipment: Incl. Control system (should be renewed) + Charging machine others: Furnace can be moved under nitrogen